---------------------------------------------------------------------------------------------------- -- $HeadURL: http://svn.wiener-d.com/src/enet/branches/SNMPv3/snmp/mibs/WIENER-CRATE-MIB.txt $ -- $LastChangedDate: 2019-04-12 17:52:22 +0200 (Fr, 12 Apr 2019) $ -- $LastChangedRevision: 4883 $ -- $LastChangedBy: koester (roemer)$ -- Copyright © 2005-2019 W-IE-NE-R Power Electronics GmbH, Burscheid, Germany ---------------------------------------------------------------------------------------------------- -- -- Checked with smilint: -- smilint -m -s -l 9 \ -- -i group-membership \ -- -i namelength-32-object \ -- -i namelength-32-bit \ -- -i opaque-smiv2 \ -- -i identifier-external-case-match \ -- WIENER-CRATE-MIB.txt -- WIENER-CRATE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, IpAddress, Integer32, -- Unsigned32, Not used at the moment. This is BER-Coded to GAUGE, not INTEGER (so different encoding) Opaque, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, MacAddress FROM SNMPv2-TC -- Float -- FROM NET-SNMP-TC -- Float -- FROM UCD-SNMP-MIB ; wiener MODULE-IDENTITY LAST-UPDATED "201904030000Z" -- April 3, 2019 ORGANIZATION "W-IE-NE-R Power Electronics GmbH" CONTACT-INFO " postal: W-IE-NE-R Power Electronics GmbH Linde 18 D-51399 Burscheid Germany email: info@wiener-d.com " DESCRIPTION "Introduction of the communication.can branch. " REVISION "201904030000Z" -- April 3, 2019 DESCRIPTION "Update the revision since 2016. " REVISION "201602180000Z" DESCRIPTION "This revision introduces new OIDs for slew control: outputResistance. " REVISION "200810090000Z" -- October 9, 2008 DESCRIPTION "New Stuff." REVISION "200805060000Z" -- May 6, 2008 DESCRIPTION "Introduction of the signal branch. " REVISION "200804150000Z" -- April 15, 2008 DESCRIPTION "Enlargement of u0..u11 -> u0..u1999 " REVISION "200804100000Z" -- April 10, 2008 DESCRIPTION "This revision uses again Integer32 instead of Counter32. " REVISION "200804020000Z" -- April 02, 2008 DESCRIPTION "This revision modifies the syntax of this file to be complient with smilint. " REVISION "200709100000Z" DESCRIPTION "This revision introduces new OIDs for debug functionality: sysDebugMemory8, sysDebugMemory16 and sysDebugMemory32. " REVISION "200703160000Z" DESCRIPTION "This revision introduces new OIDs for slew control: outputVoltageRiseRate and outputVoltageFallRate. " REVISION "200502010000Z" DESCRIPTION "This revision introduces new OIDs for group managment: groupTable " REVISION "200406280000Z" DESCRIPTION "WIENER Crate MIB, actual Firmware: UEL6E 4.02. Initial Version. " ::= { enterprises 19947 } ------------------------------------------------------------------------------- -- Define the Float Textual Convention -- This definition was written by David Perkins. -- Float ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A single precision floating-point number. The semantics and encoding are identical for type 'single' defined in IEEE Standard for Binary Floating-Point, ANSI/IEEE Std 754-1985. The value is restricted to the BER serialization of the following ASN.1 type: FLOATTYPE ::= [120] IMPLICIT FloatType (note: the value 120 is the sum of '30'h and '48'h) The BER serialization of the length for values of this type must use the definite length, short encoding form. For example, the BER serialization of value 123 of type FLOATTYPE is '9f780442f60000'h. (The tag is '9f78'h; the length is '04'h; and the value is '42f60000'h.) The BER serialization of value '9f780442f60000'h of data type Opaque is '44079f780442f60000'h. (The tag is '44'h; the length is '07'h; and the value is '9f780442f60000'h." SYNTAX Opaque (SIZE (7)) ------------------------------------------------------------------------------- --Integer16 ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d" -- STATUS current -- DESCRIPTION "Represents a 16 bit signed integer value." -- SYNTAX INTEGER (-32768..32767) OutputTripTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Special data type used for output trip time OIDs. Represents a 16 bit unsigned integer value. BER-coded as INTEGER" SYNTAX Integer32 (0..65535) OutputTripAction ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d" STATUS current DESCRIPTION "Special data type used for outpot trip action OIDs." SYNTAX INTEGER { ignore (0), channelOff (1), specialOff (2), allOff (3) } ------------------------------------------------------------------------------- -- crate ------------------------------------------------------------------------------- crate OBJECT-IDENTITY STATUS current DESCRIPTION "SNMP control for electronic crates. A crate is a complete electronic system and consists of the mechanical rack, a power supply, a fan tray and a backplane. All this things are necessary to provide an adequate housing for electronic modules (e.g. VME CPU's)" ::= { wiener 1 } --Crate ::= SEQUENCE { -- system System, -- input Input, -- output Output, -- sensor Sensor, -- communication Communication, -- powersupply Powersupply, -- fantray Fantray, -- rack Rack --} system OBJECT-IDENTITY STATUS current DESCRIPTION "A collection of objects which affect the complete crate" ::= { crate 1 } input OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are associated with the power input of the crate" ::= { crate 2 } output OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are associated with the power output of the crate" ::= { crate 3 } sensor OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are associated with temperature sensors in the crate" ::= { crate 4 } communication OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which affect the remote control of the crate" ::= { crate 5 } powersupply OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are specific for the power supply of the crate" ::= { crate 6 } fantray OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are specific for the fan tray of the crate" ::= { crate 7 } rack OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are specific for the crate (BIN) of the crate" ::= { crate 8 } signal OBJECT-IDENTITY STATUS current DESCRIPTION "All objects which are associated with analog/digtal input/output in the crate" ::= { crate 9 } ------------------------------------------------------------------------------- -- system ------------------------------------------------------------------------------- System ::= SEQUENCE { sysMainSwitch INTEGER, sysStatus BITS, sysVmeSysReset INTEGER, sysHardwareReset Integer32, sysFactoryDefaults INTEGER, sysConfigDoMeasurementCurrent BITS, sysOperatingTime Integer32, sysDebugMemory8 Integer32, sysDebugMemory16 Integer32, sysDebugMemory32 Integer32, sysDebug OCTET STRING, sysDebugDisplay OCTET STRING, sysDebugBoot OCTET STRING } sysMainSwitch OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read: An enumerated value which shows the current state of the crates main switch. Write: Try to switch the complete crate ON or OFF. Only the values ON or OFF are allowed." ::= { system 1 } sysStatus OBJECT-TYPE SYNTAX BITS { mainOn (0) , mainInhibit (1) , localControlOnly (2) , inputFailure (3) , outputFailure (4) , fantrayFailure (5) , sensorFailure (6), vmeSysfail (7), plugAndPlayIncompatible (8), busReset (9), supplyDerating (10), supplyFailure (11), supplyDerating2 (12), supplyFailure2 (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "A bit string which shows the status (health) of the complete crate. If a bit is set (1), the explanation is satisfied mainOn (0), system is switched on, individual outputs may be controlled by their specific ON/INHIBIT mainInhibit(1), external (hardware-)inhibit of the complete system localControlOnly (2), local control only (CANBUS write access denied) inputFailure (3), any input failure (e.g. power fail) outputFailure (4), any output failure, details in outputTable fantrayFailure (5), fantray failure sensorFailure (6), temperature of the external sensors too high vmeSysfail(7), VME SYSFAIL signal is active plugAndPlayIncompatible (8) wrong power supply and rack connected busReset (9) The sytem bus (e.g. VME or CPCI) reset signal is active. supplyDerating (10) The (first) system power supply has the DEG signal active. supplyFailure (11) The (first) system power supply has the FAL signal active. supplyDerating2 (12) The second system power supply has the DEG signal active. supplyFailure2 (13) The second system power supply has the FAL signal active. " ::= { system 2 } -- ERROR_BIN_CHECKSUM(?), sysVmeSysReset OBJECT-TYPE SYNTAX INTEGER { trigger (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read: Always 0. Write: Trigger the generation of the VME SYSRESET or CPIC RESET signal. This signal will be active for a time of 200 ms" ::= { system 3 } sysHardwareReset OBJECT-TYPE SYNTAX Integer32 -- INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Triggered a Reset via Watchdog or ResetLine." ::= { system 4 } sysFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { off (0), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "A set operation performs a complete factory reset of ALL data stored in the controller (e.g. community names, passwords, ...). " ::= { system 5 } sysConfigDoMeasurementCurrent OBJECT-TYPE SYNTAX BITS { ch0 (0) , ch1 (1) , ch2 (2) , ch3 (3) , ch4 (4) , ch5 (5) , ch6 (6) , ch7 (7) } MAX-ACCESS read-write STATUS current DESCRIPTION "CSet the analog inputs to measure voltage or current." ::= { system 10 } sysOperatingTime OBJECT-TYPE SYNTAX Integer32 UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds for how long the controller was in action." ::= { system 11 } sysDebugMemory8 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Debug 16-bit memory access." ::= { system 1024 } sysDebugMemory16 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Debug 16-bit memory access." ::= { system 1025 } sysDebugMemory32 OBJECT-TYPE SYNTAX Integer32 (-2147483648..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Debug 32-bit memory access." ::= { system 1026 } sysDebug OBJECT-TYPE SYNTAX OCTET STRING (SIZE (520)) MAX-ACCESS read-write STATUS current DESCRIPTION "Debug communication with the MPOD. This is a direct map to the ancient functions which are accessible via USB (without SLIP/SNMP). " ::= { system 1027 } sysDebugDisplay OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Debug communication with the MPOD display." ::= { system 1028 } sysDebugBoot OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Debug communication with the simple debug interface / bootloader." ::= { system 1029 } ------------------------------------------------------------------------------- -- input ------------------------------------------------------------------------------- -- reserved, possible entries: -- inputSetPfcVoltage -- inputMesPowerFail -- inputMesVoltage -- inputMesCurrent -- inputMesPower -- inputMesTemperature ------------------------------------------------------------------------------- -- output ------------------------------------------------------------------------------- --Output ::= SEQUENCE { -- outputNumber Integer32, -- outputTable OutputTable, -- groupsNumber Integer32, -- groupsTable GroupsTable, -- moduleNumber Integer32, -- moduleTable moduleTable -- ??TotalPower --} outputNumber OBJECT-TYPE SYNTAX Integer32 (0..1999) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output channels of the crate." ::= { output 1 } outputTable OBJECT-TYPE SYNTAX SEQUENCE OF OutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of output entries." ::= { output 2 } groupsNumber OBJECT-TYPE SYNTAX Integer32 (1..1999) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output groups of the crate." ::= { output 3 } groupsTable OBJECT-TYPE SYNTAX SEQUENCE OF GroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of output groups entries." ::= { output 4 } ------------------------------------------------------------------------------- -- outputModuleTable ------------------------------------------------------------------------------- moduleNumber OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of HV/LV modules of the crate." ::= { output 5 } moduleTable OBJECT-TYPE SYNTAX SEQUENCE OF ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of output module entries." ::= { output 6 } ------------------------------------------------------------------------------- -- outputTable ------------------------------------------------------------------------------- outputEntry OBJECT-TYPE SYNTAX OutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table row" INDEX { outputIndex } ::= { outputTable 1 } OutputEntry ::= SEQUENCE { outputIndex INTEGER, outputName DisplayString, outputGroup INTEGER, outputStatus BITS, outputMeasurementSenseVoltage Float, outputMeasurementTerminalVoltage Float, outputMeasurementCurrent Float, outputMeasurementTemperature INTEGER, outputSwitch INTEGER, outputVoltage Float, outputAdjustVoltage Integer32, outputCurrent Float, outputVoltageRiseRate Float, outputVoltageFallRate Float, outputSupervisionBehavior Integer32, outputSupervisionMinSenseVoltage Float, outputSupervisionMaxSenseVoltage Float, outputSupervisionMaxTerminalVoltage Float, outputSupervisionMaxCurrent Float, outputSupervisionMaxTemperature Integer32, outputConfigMaxSenseVoltage Float, outputConfigMaxTerminalVoltage Float, outputConfigMaxCurrent Float, outputSupervisionMaxPower Float, outputCurrentRiseRate Float, outputCurrentFallRate Float, outputTripTimeMaxCurrent OutputTripTime, outputHardwareLimitVoltage Float, outputHardwareLimitCurrent Float, outputConfigGainSenseVoltage Float, outputConfigOffsetSenseVoltage Float, outputConfigGainTerminalVoltage Float, outputConfigOffsetTerminalVoltage Float, outputConfigGainCurrent Float, outputConfigOffsetCurrent Float, outputUserConfig Integer32, outputRegulationMode INTEGER, outputConfigMaxTemperature Integer32, outputResistance Float, outputTripTimeMinSenseVoltage OutputTripTime, outputTripTimeMaxSenseVoltage OutputTripTime, outputTripTimeMaxTerminalVoltage OutputTripTime, outputTripTimeMaxTemperature OutputTripTime, outputTripTimeMaxPower OutputTripTime, outputTripTimeTimeout OutputTripTime, outputTripActionMinSenseVoltage OutputTripAction, outputTripActionMaxSenseVoltage OutputTripAction, outputTripActionMaxTerminalVoltage OutputTripAction, outputTripActionMaxCurrent OutputTripAction, outputTripActionMaxTemperature OutputTripAction, outputTripActionMaxPower OutputTripAction, outputTripActionExternalInhibit OutputTripAction, outputTripActionTimeout OutputTripAction, outputConfigDataS OCTET STRING, outputConfigDataU OCTET STRING } outputIndex OBJECT-TYPE SYNTAX INTEGER { u0(1),u1(2),u2(3),u3(4),u4(5),u5(6),u6(7),u7(8),u8(9),u9(10), u10(11),u11(12),u12(13),u13(14),u14(15),u15(16),u16(17),u17(18),u18(19),u19(20), u20(21),u21(22),u22(23),u23(24),u24(25),u25(26),u26(27),u27(28),u28(29),u29(30), u30(31),u31(32),u32(33),u33(34),u34(35),u35(36),u36(37),u37(38),u38(39),u39(40), u40(41),u41(42),u42(43),u43(44),u44(45),u45(46),u46(47),u47(48),u48(49),u49(50), u50(51),u51(52),u52(53),u53(54),u54(55),u55(56),u56(57),u57(58),u58(59),u59(60), u60(61),u61(62),u62(63),u63(64),u64(65),u65(66),u66(67),u67(68),u68(69),u69(70), u70(71),u71(72),u72(73),u73(74),u74(75),u75(76),u76(77),u77(78),u78(79),u79(80), u80(81),u81(82),u82(83),u83(84),u84(85),u85(86),u86(87),u87(88),u88(89),u89(90), u90(91),u91(92),u92(93),u93(94),u94(95),u95(96),u96(97),u97(98),u98(99),u99(100), u100(101),u101(102),u102(103),u103(104),u104(105),u105(106),u106(107),u107(108),u108(109),u109(110), u110(111),u111(112),u112(113),u113(114),u114(115),u115(116),u116(117),u117(118),u118(119),u119(120), u120(121),u121(122),u122(123),u123(124),u124(125),u125(126),u126(127),u127(128),u128(129),u129(130), u130(131),u131(132),u132(133),u133(134),u134(135),u135(136),u136(137),u137(138),u138(139),u139(140), u140(141),u141(142),u142(143),u143(144),u144(145),u145(146),u146(147),u147(148),u148(149),u149(150), u150(151),u151(152),u152(153),u153(154),u154(155),u155(156),u156(157),u157(158),u158(159),u159(160), u160(161),u161(162),u162(163),u163(164),u164(165),u165(166),u166(167),u167(168),u168(169),u169(170), u170(171),u171(172),u172(173),u173(174),u174(175),u175(176),u176(177),u177(178),u178(179),u179(180), u180(181),u181(182),u182(183),u183(184),u184(185),u185(186),u186(187),u187(188),u188(189),u189(190), u190(191),u191(192),u192(193),u193(194),u194(195),u195(196),u196(197),u197(198),u198(199),u199(200), u200(201),u201(202),u202(203),u203(204),u204(205),u205(206),u206(207),u207(208),u208(209),u209(210), u210(211),u211(212),u212(213),u213(214),u214(215),u215(216),u216(217),u217(218),u218(219),u219(220), u220(221),u221(222),u222(223),u223(224),u224(225),u225(226),u226(227),u227(228),u228(229),u229(230), u230(231),u231(232),u232(233),u233(234),u234(235),u235(236),u236(237),u237(238),u238(239),u239(240), u240(241),u241(242),u242(243),u243(244),u244(245),u245(246),u246(247),u247(248),u248(249),u249(250), u250(251),u251(252),u252(253),u253(254),u254(255),u255(256),u256(257),u257(258),u258(259),u259(260), u260(261),u261(262),u262(263),u263(264),u264(265),u265(266),u266(267),u267(268),u268(269),u269(270), u270(271),u271(272),u272(273),u273(274),u274(275),u275(276),u276(277),u277(278),u278(279),u279(280), u280(281),u281(282),u282(283),u283(284),u284(285),u285(286),u286(287),u287(288),u288(289),u289(290), u290(291),u291(292),u292(293),u293(294),u294(295),u295(296),u296(297),u297(298),u298(299),u299(300), u300(301),u301(302),u302(303),u303(304),u304(305),u305(306),u306(307),u307(308),u308(309),u309(310), u310(311),u311(312),u312(313),u313(314),u314(315),u315(316),u316(317),u317(318),u318(319),u319(320), u320(321),u321(322),u322(323),u323(324),u324(325),u325(326),u326(327),u327(328),u328(329),u329(330), u330(331),u331(332),u332(333),u333(334),u334(335),u335(336),u336(337),u337(338),u338(339),u339(340), u340(341),u341(342),u342(343),u343(344),u344(345),u345(346),u346(347),u347(348),u348(349),u349(350), u350(351),u351(352),u352(353),u353(354),u354(355),u355(356),u356(357),u357(358),u358(359),u359(360), u360(361),u361(362),u362(363),u363(364),u364(365),u365(366),u366(367),u367(368),u368(369),u369(370), u370(371),u371(372),u372(373),u373(374),u374(375),u375(376),u376(377),u377(378),u378(379),u379(380), u380(381),u381(382),u382(383),u383(384),u384(385),u385(386),u386(387),u387(388),u388(389),u389(390), u390(391),u391(392),u392(393),u393(394),u394(395),u395(396),u396(397),u397(398),u398(399),u399(400), u400(401),u401(402),u402(403),u403(404),u404(405),u405(406),u406(407),u407(408),u408(409),u409(410), u410(411),u411(412),u412(413),u413(414),u414(415),u415(416),u416(417),u417(418),u418(419),u419(420), u420(421),u421(422),u422(423),u423(424),u424(425),u425(426),u426(427),u427(428),u428(429),u429(430), u430(431),u431(432),u432(433),u433(434),u434(435),u435(436),u436(437),u437(438),u438(439),u439(440), u440(441),u441(442),u442(443),u443(444),u444(445),u445(446),u446(447),u447(448),u448(449),u449(450), u450(451),u451(452),u452(453),u453(454),u454(455),u455(456),u456(457),u457(458),u458(459),u459(460), u460(461),u461(462),u462(463),u463(464),u464(465),u465(466),u466(467),u467(468),u468(469),u469(470), u470(471),u471(472),u472(473),u473(474),u474(475),u475(476),u476(477),u477(478),u478(479),u479(480), u480(481),u481(482),u482(483),u483(484),u484(485),u485(486),u486(487),u487(488),u488(489),u489(490), u490(491),u491(492),u492(493),u493(494),u494(495),u495(496),u496(497),u497(498),u498(499),u499(500), u500(501),u501(502),u502(503),u503(504),u504(505),u505(506),u506(507),u507(508),u508(509),u509(510), u510(511),u511(512),u512(513),u513(514),u514(515),u515(516),u516(517),u517(518),u518(519),u519(520), u520(521),u521(522),u522(523),u523(524),u524(525),u525(526),u526(527),u527(528),u528(529),u529(530), u530(531),u531(532),u532(533),u533(534),u534(535),u535(536),u536(537),u537(538),u538(539),u539(540), u540(541),u541(542),u542(543),u543(544),u544(545),u545(546),u546(547),u547(548),u548(549),u549(550), u550(551),u551(552),u552(553),u553(554),u554(555),u555(556),u556(557),u557(558),u558(559),u559(560), u560(561),u561(562),u562(563),u563(564),u564(565),u565(566),u566(567),u567(568),u568(569),u569(570), u570(571),u571(572),u572(573),u573(574),u574(575),u575(576),u576(577),u577(578),u578(579),u579(580), u580(581),u581(582),u582(583),u583(584),u584(585),u585(586),u586(587),u587(588),u588(589),u589(590), u590(591),u591(592),u592(593),u593(594),u594(595),u595(596),u596(597),u597(598),u598(599),u599(600), u600(601),u601(602),u602(603),u603(604),u604(605),u605(606),u606(607),u607(608),u608(609),u609(610), u610(611),u611(612),u612(613),u613(614),u614(615),u615(616),u616(617),u617(618),u618(619),u619(620), u620(621),u621(622),u622(623),u623(624),u624(625),u625(626),u626(627),u627(628),u628(629),u629(630), u630(631),u631(632),u632(633),u633(634),u634(635),u635(636),u636(637),u637(638),u638(639),u639(640), u640(641),u641(642),u642(643),u643(644),u644(645),u645(646),u646(647),u647(648),u648(649),u649(650), u650(651),u651(652),u652(653),u653(654),u654(655),u655(656),u656(657),u657(658),u658(659),u659(660), u660(661),u661(662),u662(663),u663(664),u664(665),u665(666),u666(667),u667(668),u668(669),u669(670), u670(671),u671(672),u672(673),u673(674),u674(675),u675(676),u676(677),u677(678),u678(679),u679(680), u680(681),u681(682),u682(683),u683(684),u684(685),u685(686),u686(687),u687(688),u688(689),u689(690), u690(691),u691(692),u692(693),u693(694),u694(695),u695(696),u696(697),u697(698),u698(699),u699(700), u700(701),u701(702),u702(703),u703(704),u704(705),u705(706),u706(707),u707(708),u708(709),u709(710), u710(711),u711(712),u712(713),u713(714),u714(715),u715(716),u716(717),u717(718),u718(719),u719(720), u720(721),u721(722),u722(723),u723(724),u724(725),u725(726),u726(727),u727(728),u728(729),u729(730), u730(731),u731(732),u732(733),u733(734),u734(735),u735(736),u736(737),u737(738),u738(739),u739(740), u740(741),u741(742),u742(743),u743(744),u744(745),u745(746),u746(747),u747(748),u748(749),u749(750), u750(751),u751(752),u752(753),u753(754),u754(755),u755(756),u756(757),u757(758),u758(759),u759(760), u760(761),u761(762),u762(763),u763(764),u764(765),u765(766),u766(767),u767(768),u768(769),u769(770), u770(771),u771(772),u772(773),u773(774),u774(775),u775(776),u776(777),u777(778),u778(779),u779(780), u780(781),u781(782),u782(783),u783(784),u784(785),u785(786),u786(787),u787(788),u788(789),u789(790), u790(791),u791(792),u792(793),u793(794),u794(795),u795(796),u796(797),u797(798),u798(799),u799(800), u800(801),u801(802),u802(803),u803(804),u804(805),u805(806),u806(807),u807(808),u808(809),u809(810), u810(811),u811(812),u812(813),u813(814),u814(815),u815(816),u816(817),u817(818),u818(819),u819(820), u820(821),u821(822),u822(823),u823(824),u824(825),u825(826),u826(827),u827(828),u828(829),u829(830), u830(831),u831(832),u832(833),u833(834),u834(835),u835(836),u836(837),u837(838),u838(839),u839(840), u840(841),u841(842),u842(843),u843(844),u844(845),u845(846),u846(847),u847(848),u848(849),u849(850), u850(851),u851(852),u852(853),u853(854),u854(855),u855(856),u856(857),u857(858),u858(859),u859(860), u860(861),u861(862),u862(863),u863(864),u864(865),u865(866),u866(867),u867(868),u868(869),u869(870), u870(871),u871(872),u872(873),u873(874),u874(875),u875(876),u876(877),u877(878),u878(879),u879(880), u880(881),u881(882),u882(883),u883(884),u884(885),u885(886),u886(887),u887(888),u888(889),u889(890), u890(891),u891(892),u892(893),u893(894),u894(895),u895(896),u896(897),u897(898),u898(899),u899(900), u900(901),u901(902),u902(903),u903(904),u904(905),u905(906),u906(907),u907(908),u908(909),u909(910), u910(911),u911(912),u912(913),u913(914),u914(915),u915(916),u916(917),u917(918),u918(919),u919(920), u920(921),u921(922),u922(923),u923(924),u924(925),u925(926),u926(927),u927(928),u928(929),u929(930), u930(931),u931(932),u932(933),u933(934),u934(935),u935(936),u936(937),u937(938),u938(939),u939(940), u940(941),u941(942),u942(943),u943(944),u944(945),u945(946),u946(947),u947(948),u948(949),u949(950), u950(951),u951(952),u952(953),u953(954),u954(955),u955(956),u956(957),u957(958),u958(959),u959(960), u960(961),u961(962),u962(963),u963(964),u964(965),u965(966),u966(967),u967(968),u968(969),u969(970), u970(971),u971(972),u972(973),u973(974),u974(975),u975(976),u976(977),u977(978),u978(979),u979(980), u980(981),u981(982),u982(983),u983(984),u984(985),u985(986),u986(987),u987(988),u988(989),u989(990), u990(991),u991(992),u992(993),u993(994),u994(995),u995(996),u996(997),u997(998),u998(999),u999(1000), u1000(1001),u1001(1002),u1002(1003),u1003(1004),u1004(1005),u1005(1006),u1006(1007),u1007(1008),u1008(1009),u1009(1010), u1010(1011),u1011(1012),u1012(1013),u1013(1014),u1014(1015),u1015(1016),u1016(1017),u1017(1018),u1018(1019),u1019(1020), u1020(1021),u1021(1022),u1022(1023),u1023(1024),u1024(1025),u1025(1026),u1026(1027),u1027(1028),u1028(1029),u1029(1030), u1030(1031),u1031(1032),u1032(1033),u1033(1034),u1034(1035),u1035(1036),u1036(1037),u1037(1038),u1038(1039),u1039(1040), u1040(1041),u1041(1042),u1042(1043),u1043(1044),u1044(1045),u1045(1046),u1046(1047),u1047(1048),u1048(1049),u1049(1050), u1050(1051),u1051(1052),u1052(1053),u1053(1054),u1054(1055),u1055(1056),u1056(1057),u1057(1058),u1058(1059),u1059(1060), u1060(1061),u1061(1062),u1062(1063),u1063(1064),u1064(1065),u1065(1066),u1066(1067),u1067(1068),u1068(1069),u1069(1070), u1070(1071),u1071(1072),u1072(1073),u1073(1074),u1074(1075),u1075(1076),u1076(1077),u1077(1078),u1078(1079),u1079(1080), u1080(1081),u1081(1082),u1082(1083),u1083(1084),u1084(1085),u1085(1086),u1086(1087),u1087(1088),u1088(1089),u1089(1090), u1090(1091),u1091(1092),u1092(1093),u1093(1094),u1094(1095),u1095(1096),u1096(1097),u1097(1098),u1098(1099),u1099(1100), u1100(1101),u1101(1102),u1102(1103),u1103(1104),u1104(1105),u1105(1106),u1106(1107),u1107(1108),u1108(1109),u1109(1110), u1110(1111),u1111(1112),u1112(1113),u1113(1114),u1114(1115),u1115(1116),u1116(1117),u1117(1118),u1118(1119),u1119(1120), u1120(1121),u1121(1122),u1122(1123),u1123(1124),u1124(1125),u1125(1126),u1126(1127),u1127(1128),u1128(1129),u1129(1130), u1130(1131),u1131(1132),u1132(1133),u1133(1134),u1134(1135),u1135(1136),u1136(1137),u1137(1138),u1138(1139),u1139(1140), u1140(1141),u1141(1142),u1142(1143),u1143(1144),u1144(1145),u1145(1146),u1146(1147),u1147(1148),u1148(1149),u1149(1150), u1150(1151),u1151(1152),u1152(1153),u1153(1154),u1154(1155),u1155(1156),u1156(1157),u1157(1158),u1158(1159),u1159(1160), u1160(1161),u1161(1162),u1162(1163),u1163(1164),u1164(1165),u1165(1166),u1166(1167),u1167(1168),u1168(1169),u1169(1170), u1170(1171),u1171(1172),u1172(1173),u1173(1174),u1174(1175),u1175(1176),u1176(1177),u1177(1178),u1178(1179),u1179(1180), u1180(1181),u1181(1182),u1182(1183),u1183(1184),u1184(1185),u1185(1186),u1186(1187),u1187(1188),u1188(1189),u1189(1190), u1190(1191),u1191(1192),u1192(1193),u1193(1194),u1194(1195),u1195(1196),u1196(1197),u1197(1198),u1198(1199),u1199(1200), u1200(1201),u1201(1202),u1202(1203),u1203(1204),u1204(1205),u1205(1206),u1206(1207),u1207(1208),u1208(1209),u1209(1210), u1210(1211),u1211(1212),u1212(1213),u1213(1214),u1214(1215),u1215(1216),u1216(1217),u1217(1218),u1218(1219),u1219(1220), u1220(1221),u1221(1222),u1222(1223),u1223(1224),u1224(1225),u1225(1226),u1226(1227),u1227(1228),u1228(1229),u1229(1230), u1230(1231),u1231(1232),u1232(1233),u1233(1234),u1234(1235),u1235(1236),u1236(1237),u1237(1238),u1238(1239),u1239(1240), u1240(1241),u1241(1242),u1242(1243),u1243(1244),u1244(1245),u1245(1246),u1246(1247),u1247(1248),u1248(1249),u1249(1250), u1250(1251),u1251(1252),u1252(1253),u1253(1254),u1254(1255),u1255(1256),u1256(1257),u1257(1258),u1258(1259),u1259(1260), u1260(1261),u1261(1262),u1262(1263),u1263(1264),u1264(1265),u1265(1266),u1266(1267),u1267(1268),u1268(1269),u1269(1270), u1270(1271),u1271(1272),u1272(1273),u1273(1274),u1274(1275),u1275(1276),u1276(1277),u1277(1278),u1278(1279),u1279(1280), u1280(1281),u1281(1282),u1282(1283),u1283(1284),u1284(1285),u1285(1286),u1286(1287),u1287(1288),u1288(1289),u1289(1290), u1290(1291),u1291(1292),u1292(1293),u1293(1294),u1294(1295),u1295(1296),u1296(1297),u1297(1298),u1298(1299),u1299(1300), u1300(1301),u1301(1302),u1302(1303),u1303(1304),u1304(1305),u1305(1306),u1306(1307),u1307(1308),u1308(1309),u1309(1310), u1310(1311),u1311(1312),u1312(1313),u1313(1314),u1314(1315),u1315(1316),u1316(1317),u1317(1318),u1318(1319),u1319(1320), u1320(1321),u1321(1322),u1322(1323),u1323(1324),u1324(1325),u1325(1326),u1326(1327),u1327(1328),u1328(1329),u1329(1330), u1330(1331),u1331(1332),u1332(1333),u1333(1334),u1334(1335),u1335(1336),u1336(1337),u1337(1338),u1338(1339),u1339(1340), u1340(1341),u1341(1342),u1342(1343),u1343(1344),u1344(1345),u1345(1346),u1346(1347),u1347(1348),u1348(1349),u1349(1350), u1350(1351),u1351(1352),u1352(1353),u1353(1354),u1354(1355),u1355(1356),u1356(1357),u1357(1358),u1358(1359),u1359(1360), u1360(1361),u1361(1362),u1362(1363),u1363(1364),u1364(1365),u1365(1366),u1366(1367),u1367(1368),u1368(1369),u1369(1370), u1370(1371),u1371(1372),u1372(1373),u1373(1374),u1374(1375),u1375(1376),u1376(1377),u1377(1378),u1378(1379),u1379(1380), u1380(1381),u1381(1382),u1382(1383),u1383(1384),u1384(1385),u1385(1386),u1386(1387),u1387(1388),u1388(1389),u1389(1390), u1390(1391),u1391(1392),u1392(1393),u1393(1394),u1394(1395),u1395(1396),u1396(1397),u1397(1398),u1398(1399),u1399(1400), u1400(1401),u1401(1402),u1402(1403),u1403(1404),u1404(1405),u1405(1406),u1406(1407),u1407(1408),u1408(1409),u1409(1410), u1410(1411),u1411(1412),u1412(1413),u1413(1414),u1414(1415),u1415(1416),u1416(1417),u1417(1418),u1418(1419),u1419(1420), u1420(1421),u1421(1422),u1422(1423),u1423(1424),u1424(1425),u1425(1426),u1426(1427),u1427(1428),u1428(1429),u1429(1430), u1430(1431),u1431(1432),u1432(1433),u1433(1434),u1434(1435),u1435(1436),u1436(1437),u1437(1438),u1438(1439),u1439(1440), u1440(1441),u1441(1442),u1442(1443),u1443(1444),u1444(1445),u1445(1446),u1446(1447),u1447(1448),u1448(1449),u1449(1450), u1450(1451),u1451(1452),u1452(1453),u1453(1454),u1454(1455),u1455(1456),u1456(1457),u1457(1458),u1458(1459),u1459(1460), u1460(1461),u1461(1462),u1462(1463),u1463(1464),u1464(1465),u1465(1466),u1466(1467),u1467(1468),u1468(1469),u1469(1470), u1470(1471),u1471(1472),u1472(1473),u1473(1474),u1474(1475),u1475(1476),u1476(1477),u1477(1478),u1478(1479),u1479(1480), u1480(1481),u1481(1482),u1482(1483),u1483(1484),u1484(1485),u1485(1486),u1486(1487),u1487(1488),u1488(1489),u1489(1490), u1490(1491),u1491(1492),u1492(1493),u1493(1494),u1494(1495),u1495(1496),u1496(1497),u1497(1498),u1498(1499),u1499(1500), u1500(1501),u1501(1502),u1502(1503),u1503(1504),u1504(1505),u1505(1506),u1506(1507),u1507(1508),u1508(1509),u1509(1510), u1510(1511),u1511(1512),u1512(1513),u1513(1514),u1514(1515),u1515(1516),u1516(1517),u1517(1518),u1518(1519),u1519(1520), u1520(1521),u1521(1522),u1522(1523),u1523(1524),u1524(1525),u1525(1526),u1526(1527),u1527(1528),u1528(1529),u1529(1530), u1530(1531),u1531(1532),u1532(1533),u1533(1534),u1534(1535),u1535(1536),u1536(1537),u1537(1538),u1538(1539),u1539(1540), u1540(1541),u1541(1542),u1542(1543),u1543(1544),u1544(1545),u1545(1546),u1546(1547),u1547(1548),u1548(1549),u1549(1550), u1550(1551),u1551(1552),u1552(1553),u1553(1554),u1554(1555),u1555(1556),u1556(1557),u1557(1558),u1558(1559),u1559(1560), u1560(1561),u1561(1562),u1562(1563),u1563(1564),u1564(1565),u1565(1566),u1566(1567),u1567(1568),u1568(1569),u1569(1570), u1570(1571),u1571(1572),u1572(1573),u1573(1574),u1574(1575),u1575(1576),u1576(1577),u1577(1578),u1578(1579),u1579(1580), u1580(1581),u1581(1582),u1582(1583),u1583(1584),u1584(1585),u1585(1586),u1586(1587),u1587(1588),u1588(1589),u1589(1590), u1590(1591),u1591(1592),u1592(1593),u1593(1594),u1594(1595),u1595(1596),u1596(1597),u1597(1598),u1598(1599),u1599(1600), u1600(1601),u1601(1602),u1602(1603),u1603(1604),u1604(1605),u1605(1606),u1606(1607),u1607(1608),u1608(1609),u1609(1610), u1610(1611),u1611(1612),u1612(1613),u1613(1614),u1614(1615),u1615(1616),u1616(1617),u1617(1618),u1618(1619),u1619(1620), u1620(1621),u1621(1622),u1622(1623),u1623(1624),u1624(1625),u1625(1626),u1626(1627),u1627(1628),u1628(1629),u1629(1630), u1630(1631),u1631(1632),u1632(1633),u1633(1634),u1634(1635),u1635(1636),u1636(1637),u1637(1638),u1638(1639),u1639(1640), u1640(1641),u1641(1642),u1642(1643),u1643(1644),u1644(1645),u1645(1646),u1646(1647),u1647(1648),u1648(1649),u1649(1650), u1650(1651),u1651(1652),u1652(1653),u1653(1654),u1654(1655),u1655(1656),u1656(1657),u1657(1658),u1658(1659),u1659(1660), u1660(1661),u1661(1662),u1662(1663),u1663(1664),u1664(1665),u1665(1666),u1666(1667),u1667(1668),u1668(1669),u1669(1670), u1670(1671),u1671(1672),u1672(1673),u1673(1674),u1674(1675),u1675(1676),u1676(1677),u1677(1678),u1678(1679),u1679(1680), u1680(1681),u1681(1682),u1682(1683),u1683(1684),u1684(1685),u1685(1686),u1686(1687),u1687(1688),u1688(1689),u1689(1690), u1690(1691),u1691(1692),u1692(1693),u1693(1694),u1694(1695),u1695(1696),u1696(1697),u1697(1698),u1698(1699),u1699(1700), u1700(1701),u1701(1702),u1702(1703),u1703(1704),u1704(1705),u1705(1706),u1706(1707),u1707(1708),u1708(1709),u1709(1710), u1710(1711),u1711(1712),u1712(1713),u1713(1714),u1714(1715),u1715(1716),u1716(1717),u1717(1718),u1718(1719),u1719(1720), u1720(1721),u1721(1722),u1722(1723),u1723(1724),u1724(1725),u1725(1726),u1726(1727),u1727(1728),u1728(1729),u1729(1730), u1730(1731),u1731(1732),u1732(1733),u1733(1734),u1734(1735),u1735(1736),u1736(1737),u1737(1738),u1738(1739),u1739(1740), u1740(1741),u1741(1742),u1742(1743),u1743(1744),u1744(1745),u1745(1746),u1746(1747),u1747(1748),u1748(1749),u1749(1750), u1750(1751),u1751(1752),u1752(1753),u1753(1754),u1754(1755),u1755(1756),u1756(1757),u1757(1758),u1758(1759),u1759(1760), u1760(1761),u1761(1762),u1762(1763),u1763(1764),u1764(1765),u1765(1766),u1766(1767),u1767(1768),u1768(1769),u1769(1770), u1770(1771),u1771(1772),u1772(1773),u1773(1774),u1774(1775),u1775(1776),u1776(1777),u1777(1778),u1778(1779),u1779(1780), u1780(1781),u1781(1782),u1782(1783),u1783(1784),u1784(1785),u1785(1786),u1786(1787),u1787(1788),u1788(1789),u1789(1790), u1790(1791),u1791(1792),u1792(1793),u1793(1794),u1794(1795),u1795(1796),u1796(1797),u1797(1798),u1798(1799),u1799(1800), u1800(1801),u1801(1802),u1802(1803),u1803(1804),u1804(1805),u1805(1806),u1806(1807),u1807(1808),u1808(1809),u1809(1810), u1810(1811),u1811(1812),u1812(1813),u1813(1814),u1814(1815),u1815(1816),u1816(1817),u1817(1818),u1818(1819),u1819(1820), u1820(1821),u1821(1822),u1822(1823),u1823(1824),u1824(1825),u1825(1826),u1826(1827),u1827(1828),u1828(1829),u1829(1830), u1830(1831),u1831(1832),u1832(1833),u1833(1834),u1834(1835),u1835(1836),u1836(1837),u1837(1838),u1838(1839),u1839(1840), u1840(1841),u1841(1842),u1842(1843),u1843(1844),u1844(1845),u1845(1846),u1846(1847),u1847(1848),u1848(1849),u1849(1850), u1850(1851),u1851(1852),u1852(1853),u1853(1854),u1854(1855),u1855(1856),u1856(1857),u1857(1858),u1858(1859),u1859(1860), u1860(1861),u1861(1862),u1862(1863),u1863(1864),u1864(1865),u1865(1866),u1866(1867),u1867(1868),u1868(1869),u1869(1870), u1870(1871),u1871(1872),u1872(1873),u1873(1874),u1874(1875),u1875(1876),u1876(1877),u1877(1878),u1878(1879),u1879(1880), u1880(1881),u1881(1882),u1882(1883),u1883(1884),u1884(1885),u1885(1886),u1886(1887),u1887(1888),u1888(1889),u1889(1890), u1890(1891),u1891(1892),u1892(1893),u1893(1894),u1894(1895),u1895(1896),u1896(1897),u1897(1898),u1898(1899),u1899(1900), u1900(1901),u1901(1902),u1902(1903),u1903(1904),u1904(1905),u1905(1906),u1906(1907),u1907(1908),u1908(1909),u1909(1910), u1910(1911),u1911(1912),u1912(1913),u1913(1914),u1914(1915),u1915(1916),u1916(1917),u1917(1918),u1918(1919),u1919(1920), u1920(1921),u1921(1922),u1922(1923),u1923(1924),u1924(1925),u1925(1926),u1926(1927),u1927(1928),u1928(1929),u1929(1930), u1930(1931),u1931(1932),u1932(1933),u1933(1934),u1934(1935),u1935(1936),u1936(1937),u1937(1938),u1938(1939),u1939(1940), u1940(1941),u1941(1942),u1942(1943),u1943(1944),u1944(1945),u1945(1946),u1946(1947),u1947(1948),u1948(1949),u1949(1950), u1950(1951),u1951(1952),u1952(1953),u1953(1954),u1954(1955),u1955(1956),u1956(1957),u1957(1958),u1958(1959),u1959(1960), u1960(1961),u1961(1962),u1962(1963),u1963(1964),u1964(1965),u1965(1966),u1966(1967),u1967(1968),u1968(1969),u1969(1970), u1970(1971),u1971(1972),u1972(1973),u1973(1974),u1974(1975),u1975(1976),u1976(1977),u1977(1978),u1978(1979),u1979(1980), u1980(1981),u1981(1982),u1982(1983),u1983(1984),u1984(1985),u1985(1986),u1986(1987),u1987(1988),u1988(1989),u1989(1990), u1990(1991),u1991(1992),u1992(1993),u1993(1994),u1994(1995),u1995(1996),u1996(1997),u1997(1998),u1998(1999),u1999(2000)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each power output channel. Its value ranges between 1 and total number of output channels. This value is equivalent to the output channel number at the type label of the crate or power supply, but because the SMI index starts at 1, index 1 corresponds to U0. " ::= { outputEntry 1 } outputName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing a short name of the output. If the crate is equipped with an alphanumeric display, this string is shown to identify a output channel. " ::= { outputEntry 2 } outputGroup OBJECT-TYPE SYNTAX Integer32 (1..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The group number (1...63) assigned to each channel. If commands shall be sent to all channels with a specific group number (e.g. with the groupsSwitch command defined below), additional bits can be added to the group number: HLgggggg g: Group number (1...63) L: Mask bit: 1: high voltage channels only, no low voltage channels H: Mask bit: 1: low voltage channels only, no high voltage channels Special groups: 0: all (LV+HV) channels 0x40: all, but no LV channels 0x80: all, but no HV channels " ::= { outputEntry 3 } outputStatus OBJECT-TYPE SYNTAX BITS { outputOn (0), outputInhibit (1) , outputFailureMinSenseVoltage (2), outputFailureMaxSenseVoltage (3), outputFailureMaxTerminalVoltage (4), outputFailureMaxCurrent (5), outputFailureMaxTemperature (6), outputFailureMaxPower (7), -- reserved outputFailureTimeout (9), outputCurrentLimited (10), outputRampUp (11), outputRampDown (12), outputEnableKill(13), outputEmergencyOff (14), outputAdjusting (15), outputConstantVoltage (16), outputLowCurrentRange (17), outputCurrentBoundsExceeded (18), outputFailureCurrentLimit (19) } MAX-ACCESS read-only STATUS current DESCRIPTION "A bit string which shows the status (health and operating conditions) of one output channel. If a bit is set (1), the explanation is satisfied: outputOn (0), output channel is on outputInhibit(1), external (hardware-)inhibit of the output channel outputFailureMinSenseVoltage (2) Supervision limit hurt: Sense voltage is too low outputFailureMaxSenseVoltage (3), Supervision limit hurt: Sense voltage is too high outputFailureMaxTerminalVoltage (4), Supervision limit hurt: Terminal voltage is too high outputFailureMaxCurrent (5), Supervision limit hurt: Current is too high outputFailureMaxTemperature (6), Supervision limit hurt: Heat sink temperature is too high outputFailureMaxPower (7), Supervision limit hurt: Output power is too high outputFailureTimeout (9), Communication timeout between output channel and main control outputCurrentLimited (10), Current limiting is active (constant current mode) outputRampUp (11), Output voltage is increasing (e.g. after switch on) outputRampDown (12), Output voltage is decreasing (e.g. after switch off) outputEnableKill (13), EnableKill is active outputEmergencyOff (14), EmergencyOff event is active outputAdjusting (15), Fine adjustment is working outputConstantVoltage (16), Voltage control (constant voltage mode) outputLowCurrentRange (17), The channel is operating in the low current measurement range outputCurrentBoundsExceeded (18), Output current is out of bounds outputFailureCurrentLimit (19) Hardware current limit (EHS) / trip (EDS, EBS) was exceeded " ::= { outputEntry 4 } outputMeasurementSenseVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured voltage at the sense input lines." ::= { outputEntry 5 } outputMeasurementTerminalVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured voltage at the output terminals." ::= { outputEntry 6 } outputMeasurementCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured output current." ::= { outputEntry 7 } outputMeasurementTemperature OBJECT-TYPE SYNTAX INTEGER { ok (-128), failure(127) } UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured temperature of the power module." ::= { outputEntry 8 } outputSwitch OBJECT-TYPE SYNTAX INTEGER { off (0), on (1), resetEmergencyOff (2), setEmergencyOff (3), clearEvents (10), setVoltageRippleMeasurementOff(20), setVoltageMeasurementOn(21), setRippleMeasurementOn(22), setVoltageRippleMeasurementOn(23) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read: An enumerated value which shows the current state of the output channel. Write: Change the state of the channel. If the channel is On, and the write value is Off, then the channel will switch Off. If the channel is Off, and the write value is On, and if no other signals (mainInhibit, outputInhibit, outputEmergencyOff or outputFailureMaxCurrent) are active, then the channel will switch on. If the write value is resetEmergencyOff, then the channel will leave the state EmergencyOff. A write of clearEvents is necessary before the voltage can ramp up again. If the write value is setEmergencyOff, then the channel will have the state EmergencyOff, which means that the High Voltage will switch off without a ramp and reset of the outputVoltage to null volt. If the write value is clearEvents, then all failure messages of the outputStatus will be reset (all channel events, all module events and the state emergencyOff). " ::= { outputEntry 9 } outputVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The nominal output voltage of the channel." ::= { outputEntry 10 } outputAdjustVoltage OBJECT-TYPE SYNTAX Integer32 (-128..127) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A posibillity to make small changes of the output voltage." ::= { outputEntry 11 } outputCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-write STATUS current DESCRIPTION "The current limit of the channel." ::= { outputEntry 12 } outputVoltageRiseRate OBJECT-TYPE SYNTAX Float UNITS "V/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Voltage Fall Slew Rate [V/s]. The slew rate of the output voltage if it increases (after switch on or if the Voltage has been changed). " ::= { outputEntry 13 } outputVoltageFallRate OBJECT-TYPE SYNTAX Float UNITS "V/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Voltage Rise Slew Rate [V/s]. The slew rate of the output voltage if it decreases (after switch off or if the Voltage has been changed). " ::= { outputEntry 14 } outputSupervisionBehavior OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A bit field packed into an integer which define the behavior of the output channel / power supply after failures. For each supervision value, a two-bit field exists. The enumeration of this value (..L+..H*2) is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate. iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. The position of the bit fields in the integer value are: Bit 0, 1: outputFailureMinSenseVoltage Bit 2, 3: outputFailureMaxSenseVoltage Bit 4, 5: outputFailureMaxTerminalVoltage Bit 6, 7: outputFailureMaxCurrent Bit 8, 9: outputFailureMaxTemperature Bit 10, 11: outputFailureMaxPower Bit 12, 13: outputFailureInhibit Bit 14, 15: outputFailureTimeout " ::= { outputEntry 15 } outputSupervisionMinSenseVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured sense voltage is below this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 16 } outputSupervisionMaxSenseVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured sense voltage is above this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 17 } outputSupervisionMaxTerminalVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured voltage at the power supply output terminals is above this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 18 } outputSupervisionMaxCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured current is above this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 19 } outputSupervisionMaxTemperature OBJECT-TYPE -- SYNTAX Integer32 (-128..127) SYNTAX Integer32 UNITS "deg.C" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured module temperature is above this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 20 } outputConfigMaxSenseVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum possible value of the sense voltage" ::= { outputEntry 21 } outputConfigMaxTerminalVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum possible value of the terminal voltage" ::= { outputEntry 22 } outputConfigMaxCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum possible value of the output current" ::= { outputEntry 23 } outputSupervisionMaxPower OBJECT-TYPE SYNTAX Float UNITS "W" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured power (measured current * measured terminal voltage) is above this value, the power supply performs the function defined by SupervisionAction. " ::= { outputEntry 24 } outputCurrentRiseRate OBJECT-TYPE SYNTAX Float UNITS "A/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Current Fall Slew Rate [A/s]. The slew rate of the output current if it increases (after switch on or if the Current has been changed). " ::= { outputEntry 25 } outputCurrentFallRate OBJECT-TYPE SYNTAX Float UNITS "A/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Current Rise Slew Rate [A/s]. The slew rate of the output current if it decreases (after switch off or if the Current has been changed). " ::= { outputEntry 26 } outputTripTimeMaxCurrent OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMaxCurrent threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior (bit field outputFailureMaxCurrent) or the new outputTripActionMaxCurrent." ::= { outputEntry 27 } outputHardwareLimitVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Voltage Limit [V]. Potentiometer to adjust the global hardware voltage limit (for all channels of a module). " ::= { outputEntry 28 } outputHardwareLimitCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware Current Limit [A]. Potentiometer to adjust the global hardware current limit (for all channels of a module). " ::= { outputEntry 29 } outputConfigGainSenseVoltage OBJECT-TYPE SYNTAX Float MAX-ACCESS read-write STATUS current DESCRIPTION "The gain value of the sense voltage" ::= { outputEntry 30 } outputConfigOffsetSenseVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The offset value of the sense voltage" ::= { outputEntry 31 } outputConfigGainTerminalVoltage OBJECT-TYPE SYNTAX Float MAX-ACCESS read-write STATUS current DESCRIPTION "The gain value of the sense voltage" ::= { outputEntry 32 } outputConfigOffsetTerminalVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The offset value of the sense voltage" ::= { outputEntry 33 } outputConfigGainCurrent OBJECT-TYPE SYNTAX Float MAX-ACCESS read-write STATUS current DESCRIPTION "The gain value of the sense voltage" ::= { outputEntry 34 } outputConfigOffsetCurrent OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-write STATUS current DESCRIPTION "The offset value of the sense voltage" ::= { outputEntry 35 } outputUserConfig OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Definition of user-changeable items. A bit field packed into an integer which define the behavior of the output channel. Usable for WIENER LV devices only. The position of the bit fields in the integer value are: Bit 0: Voltage ramping at switch off: 0: Ramp down at switch off. 1: No ramp at switch off (immediate off) Bit 1, 2: Set different regulation modes, dependent on the cable inductance: 0: fast: short cables, up to 1 meter. 1: moderate: cables from 1 to 30 meter. 2: fast: identical to 0 (should not be used) 3: slow: cables longer than 30 meter. Bit 3: Internal sense line connection to the output (MPOD only): 0: The sense input at the sense connector is used for regulation. 1: The output voltage is used for regulation. Any signals at the sense connector are ignored. Bit 4: Enable External Inhibit input. 0: The external inhibit input is ignored. 1: The external inhibit input must be connected to a voltage source to allow switch on. Bit 5: Disable Global Inhibit inputs. 0: The global inhibit/interlock inputs of the system is active. 1: The global inhibit/interlock inputs of the system is ignored. Bit 6: Automatic Power On. 0: After switching the main system switch ON, the output is not switched on automatically. A separate outputSwitch command is required. 1: After switching the main system switch ON, the output is switched on automatically. If 'Disable Global Inhibit' (bit 5) is set, the output will be switched on regardless of the global inhibit/interlock signals. Community required for write access: guru. " ::= { outputEntry 37 } outputRegulationMode OBJECT-TYPE SYNTAX INTEGER { fast (0), moderate (1), slow (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Definition of the regulation mode. Deprecated, use outputUserConfig for this function in the future! It is possible to set different regulation modes, dependent on the cable inductance. fast: short cables, up to 1 meter. moderate: cables from 1 to 30 meter. slow: cables longer than 30 meter. Community required for write access: guru. " ::= { outputEntry 38 } outputConfigMaxTemperature OBJECT-TYPE SYNTAX Integer32 -- SYNTAX Integer32 (-128..127) UNITS "deg.C" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum possible value of outputSupervisionMaxTemperature." ::= { outputEntry 39 } outputResistance OBJECT-TYPE SYNTAX Float UNITS "Ohm" MAX-ACCESS read-write STATUS current DESCRIPTION "Item to specify an external resistor. For instance a wire resistor or an external resistor to protect the detectot which is supplied by a cascaded HV module. " ::= { outputEntry 40 } outputTripTimeMinSenseVoltage OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMinSenseVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMinSenseVoltage. " ::= { outputEntry 41 } outputTripTimeMaxSenseVoltage OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMaxSenseVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxSenseVoltage. " ::= { outputEntry 42 } outputTripTimeMaxTerminalVoltage OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMaxTerminalVoltage threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxTerminalVoltage. " ::= { outputEntry 43 } outputTripTimeMaxTemperature OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMaxTemperature threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxTemperature. " ::= { outputEntry 44 } outputTripTimeMaxPower OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time the outputSupervisionMaxPower threshold must be violated to activate the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionMaxPower. " ::= { outputEntry 45 } outputTripTimeTimeout OBJECT-TYPE SYNTAX OutputTripTime UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time the communication between module and controller can paused before activation the trip action [ms]. The trip action is defined in outputSupervisionBehavior or the new outputTripActionTimeout. " ::= { outputEntry 46 } outputTripActionMinSenseVoltage OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMinSenseVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 0..1 of outputSupervisionBehavior. " ::= { outputEntry 47 } outputTripActionMaxSenseVoltage OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMaxSenseVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 2..3 of outputSupervisionBehavior. " ::= { outputEntry 48 } outputTripActionMaxTerminalVoltage OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMaxTerminalVoltage threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 4..5 of outputSupervisionBehavior. " ::= { outputEntry 49 } outputTripActionMaxCurrent OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMaxCurrent threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate. iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 6..7 of outputSupervisionBehavior. " ::= { outputEntry 50 } outputTripActionMaxTemperature OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMaxTemperature threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 8..9 of outputSupervisionBehavior. " ::= { outputEntry 51 } outputTripActionMaxPower OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if outputSuperisionMaxPower threshold has been violated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 10..11 of outputSupervisionBehavior. " ::= { outputEntry 52 } outputTripActionExternalInhibit OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if the external inhibit input has been activated. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 12..13 of outputSupervisionBehavior. " ::= { outputEntry 53 } outputTripActionTimeout OBJECT-TYPE SYNTAX OutputTripAction MAX-ACCESS read-write STATUS current DESCRIPTION "Trip action if the communication between module and controller has been paused longer than outputTripTimeTimeout. The enumerated value is: WIENER LV devices 0 ignore the failure 1 switch off this channel 2 switch off all channels with the same group number 3 switch off the complete crate iseg HV devices 0 ignore the failure 1 switch off this channel by ramp down the voltage 2 switch off this channel by a emergencyOff 3 switch off the whole board of the HV module by emergencyOff. This is a direct access of bits 14..15 of outputSupervisionBehavior. " ::= { outputEntry 54 } outputConfigDataS OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format used for writing data, or returned from the SNMP client after read/write (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets " ::= { outputEntry 1024 } outputConfigDataU OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets " ::= { outputEntry 1025 } ------------------------------------------------------------------------------- -- output->groups ------------------------------------------------------------------------------- groupsEntry OBJECT-TYPE SYNTAX GroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table row" INDEX { groupsIndex } ::= { groupsTable 1 } GroupsEntry ::= SEQUENCE { groupsIndex INTEGER, -- outputGroupsName -- DisplayString, -- outputGroupsGroup -- INTEGER, -- outputGroupsStatus -- BITS, -- outputGroupsMeasurementSenseVoltage -- Float, -- outputMeasurementTerminalVoltage -- Float, -- outputMeasurementCurrent -- Float, -- outputMeasurementTemperature -- INTEGER, groupsSwitch INTEGER -- outputVoltage -- Float, -- outputAdjustVoltage -- INTEGER, -- outputCurrent -- Float, -- outputRampUp -- Float, -- outputRampDown -- Float, -- outputSupervisionBehavior -- INTEGER, -- outputSupervisionMinSenseVoltage -- Float, -- outputSupervisionMaxSenseVoltage -- Float, -- outputSupervisionMaxTerminalVoltage -- Float, -- outputSupervisionMaxCurrent -- Float, -- outputSupervisionMaxTemperature -- INTEGER, -- outputConfigMaxSenseVoltage -- Float, -- outputConfigMaxTerminalVoltage -- Float, -- outputConfigMaxCurrent -- Float, -- outputSupervisionMaxPower -- Float, } groupsIndex OBJECT-TYPE SYNTAX Integer32 (0..1999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each power output group. Its value ranges between 1 and 1999. The special group 0 is predefined and gives access to all channels. " ::= { groupsEntry 1 } groupsSwitch OBJECT-TYPE SYNTAX INTEGER { undefined (-1), off (0), on (1), resetEmergencyOff (2), setEmergencyOff(3), disableKill (4), enableKill (5), disableAdjust(6), enableAdjust(7), clearEvents(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read: This function is not defined with groups of output channels. Write: Switch the state of all channels of a group. If any channel is On, and the write value is Off, then all channels will switch off. If any channel is Off, and the write value is On, and if no other signals (mainInhibit, outputInhibit, outputEmergencyOff or outputFailureMaxCurrent) are active, then all channels will switch on. If the write value is resetEmergencyOff, then all channels will leave the state EmergencyOff. A write of clearEvents is necessary before the voltage can ramp up again. If the write value is setEmergencyOff, then all channels will have the state EmergencyOff, which means that the High Voltage will switch off without a ramp and reset of the outputVoltage to null volt. If the write value is disableKILL, then all channels will switch to disableKill (outputStatus outputDisableKill). If the write value is enableKILL, then all channels will switch to enableKill (outputStatus outputEnableKill). If the write value is clearEvents, then all failure messages of the outputStatus will be cleared (all channel events, all module events and the state outputEmergencyOff will be reset). For a detailed description of the different group numbers available look at the outputGroup OID above. " ::= { groupsEntry 9 } --groupsName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (1..4)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "A textual string containing a short name of the -- output. If the crate is equipped with an alphanumeric -- display, this string is shown to identify a output channel. -- " -- ::= { groupsEntry 2 } ------------------------------------------------------------------------------- -- output->module ------------------------------------------------------------------------------- -- device related parsing of the HV data items -- -- advantage: -- Parsing this branch the user directly recognises the structure -- of HV/LV devices and the hierarchie of data items, -- module and channel functions and their interaction. -- This branch gives an image of the module seen from outsite. -- The inner structure will be transformed into a simple and reduced namspace -- which has implemented the common module items and the items for the single -- channels. -- Module characteristics will image the propeties to a moduleTable which -- gives an access to the collected properties of the module items whitout -- a splitting for board 1 and board 2. -- The channels sequence will collect all the channels also these -- from a second board if it is integrated. ------------------------------------------------------------------------------- moduleEntry OBJECT-TYPE SYNTAX ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of HV/LV modules" INDEX { moduleIndex } ::= { moduleTable 1 } ModuleEntry ::= SEQUENCE { moduleIndex INTEGER, moduleDescription OCTET STRING, -- moduleChannelNumber INTEGER32, -- moduleAuxiliaryNumber INTEGER32, moduleAuxiliaryMeasurementVoltage Float, moduleHardwareLimitVoltage Float, moduleHardwareLimitCurrent Float, moduleRampSpeedVoltage Float, moduleRampSpeedCurrent Float, moduleStatus BITS, moduleEventStatus BITS, moduleEventChannelStatus BITS, moduleDoClear INTEGER, -- moduleAuxiliaryTemperatureSensorNumber INTEGER32, moduleAuxiliaryMeasurementTemperature Float, moduleConfigDataS OCTET STRING, moduleConfigDataU OCTET STRING } moduleIndex OBJECT-TYPE SYNTAX INTEGER { ma0(1),ma1(2),ma2(3),ma3(4),ma4(5),ma5(6),ma6(7),ma7(8),ma8(9),ma9(10)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each HV/LV module. Its value ranges between 1 and the total number of HV/LV modules. Note, index 1 corresponds to ma0." ::= { moduleEntry 1 } moduleDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..39)) MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor, FirmwareName, ChannelNumber, SerialNumber, FirmwareRelease Vendor WIENER or iseg FirmwareName: 'E16D0' EDS 16 channels per PCB, distributor module, range of Vmax from VO max to (VO max - 1kV) 'E16D1' EDS 16 channels per PCB, distributor module 'E08C0' EHS 8 channels per PCB, common GND module 'E08F0' EHS 8 channels per PCB, floating GND module 'E08F2' EHS 8 channels per PCB, floating GND module, 2 current measurement ranges 'E08C2' EHS 8 channels per PCB, common floating GND module, 2 current measurement ranges 'E08B0' EBS 8 bipolars channel per PCB, distributor module 'H101C0' HPS 1 channel HV high power supply ChannelNumber 1 to 64 SerialNumber 71xxxx FirmwareRelease x.xx " ::= { moduleEntry 2 } ------------------------------------------------------------------------------- moduleAuxiliaryMeasurementVoltage OBJECT-IDENTITY STATUS current DESCRIPTION "The measured module auxiliary voltages." ::= { moduleEntry 3 } moduleAuxiliaryMeasurementVoltage0 OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module auxiliary voltage." ::= { moduleAuxiliaryMeasurementVoltage 1 } moduleAuxiliaryMeasurementVoltage1 OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module auxiliary voltage." ::= { moduleAuxiliaryMeasurementVoltage 2 } ------------------------------------------------------------------------------- moduleHardwareLimitVoltage OBJECT-TYPE SYNTAX Float UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The module hardware voltage limit." ::= { moduleEntry 4 } moduleHardwareLimitCurrent OBJECT-TYPE SYNTAX Float UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The module hardware current limit." ::= { moduleEntry 5 } moduleRampSpeedVoltage OBJECT-TYPE SYNTAX Float UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "The module voltage ramp speed (iseg HV modules have the same ramp speed value for all channels). " ::= { moduleEntry 6 } moduleRampSpeedCurrent OBJECT-TYPE SYNTAX Float UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "The module current ramp speed (iseg HV modules have the same ramp speed value for all channels). " ::= { moduleEntry 7 } moduleStatus OBJECT-TYPE SYNTAX BITS { moduleIsFineAdjustment (0), -- reserved moduleIsLiveInsertion (2), moduleIsHighVoltageOn (3), moduleNeedService (4), moduleHardwareLimitVoltageIsGood (5), moduleIsInputError (6), -- reserved moduleIsNoSumError (8), moduleIsNoRamp (9), moduleSafetyLoopIsGood (10), moduleIsEventActive (11), moduleIsGood (12), moduleSupplyIsGood (13), moduleTemperatureIsGood (14), moduleIsKillEnable (15) } MAX-ACCESS read-only STATUS current DESCRIPTION "A bit string which shows the current module status. If a bit is set (1), the explanation is satisfied: moduleIsFineAdjustment (0), Module has reached state fine adjustment. moduleIsLiveInsertion (2), Module is in state live insertion. moduleNeedService (4), Hardware failure detected (consult iseg Spezialelektronik GmbH). moduleIsHardwareLimitVoltageGood (5), Hardware limit voltage in proper range, using for HV distributor modules with current mirror only. moduleIsInputError (6), Input error in connection with a module access. moduleIsNoSumError (8), All channels without any failure. moduleIsNoRamp (9), All channels stable, no is ramp active. moduleIsSafetyLoopGood (10), Safety loop is closed. moduleIsEventActive (11), Any event is active and mask is set. moduleIsGood (12), Module state is good. moduleIsSupplyGood (13), Power supply is good. moduleIsTemperatureGood (14), Module temperature is good. moduleIsKillEnable (15) Module state of kill enable. " ::= { moduleEntry 8 } moduleEventStatus OBJECT-TYPE SYNTAX BITS { moduleEventPowerFail (0), -- reserved moduleEventLiveInsertion (2), -- reserved moduleEventService (4), moduleHardwareLimitVoltageNotGood (5), moduleEventInputError (6), -- reserved -- reserved, -- reserved,, moduleEventSafetyLoopNotGood (10), -- reserved, -- reserved, moduleEventSupplyNotGood (13), moduleEventTemperatureNotGood (14) -- reserved, } MAX-ACCESS read-only STATUS current DESCRIPTION "A bit string which shows the current module status. If a bit is set (1), the explanation is satisfied: moduleEventPowerFail (0), Event power fail generated by the MPOD controller in order to ramp down all HV's (ramp speed=1000V/s) moduleEventLiveInsertion (2), Event live insertion to prepare a hot plug of a module moduleEventService (4), Module event: Hardware failure detected (consult iseg Spezialelektronik GmbH). moduleHardwareLimitVoltageNotGood (5), Module Event: Hardware voltage limit is not in proper range, using for HV distributor modules with current mirror only. moduleEventInputError (6), Module event: There was an input error in connection with a module access moduleEventSafetyLoopNotGood (10), Module event: Safety loop is open. moduleEventSupplyNotGood (13), Module event: At least one of the supplies is not good. moduleEventTemperatureNotGood (14), Module event: Temperature was above the permitted threshold (for EDS/EHS temperature above 55 degr.C) " ::= { moduleEntry 9 } moduleEventChannelStatus OBJECT-TYPE SYNTAX BITS { channel0 (0), channel1 (1), channel2 (2), channel3 (3), channel4 (4), channel5 (5), channel6 (6), channel7 (7), channel8 (8), channel9 (9), channel10 (10), channel11 (11), channel12 (12), channel13 (13), channel14 (14), channel15 (15), channel16 (16), channel17 (17), channel18 (18), channel19 (19), channel20 (20), channel21 (21), channel22 (22), channel23 (23), channel24 (24), channel25 (25), channel26 (26), channel27 (27), channel28 (28), channel29 (29), channel30 (30), channel31 (31), channel32 (32), channel33 (33), channel34 (34), channel35 (35), channel36 (36), channel37 (37), channel38 (38), channel39 (39), channel40 (40), channel41 (41), channel42 (42), channel43 (43), channel44 (44), channel45 (45), channel46 (46), channel47 (47) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit field that reserves one bit for every channel. bit 0 HV channel 0 bit 1 HV channel 1 bit x HV channel x " ::= { moduleEntry 10 } moduleDoClear OBJECT-TYPE SYNTAX INTEGER { nothing (0), doClear (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "All events of the module will be cleared." ::= { moduleEntry 11 } ------------------------------------------------------------------------------- moduleAuxiliaryMeasurementTemperature OBJECT-IDENTITY STATUS current DESCRIPTION "The number of auxiliary temperature sensors in the module." ::= { moduleEntry 12 } moduleAuxiliaryMeasurementTemperature0 OBJECT-TYPE SYNTAX Float UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module temperature of sensor 1." ::= { moduleAuxiliaryMeasurementTemperature 1 } moduleAuxiliaryMeasurementTemperature1 OBJECT-TYPE SYNTAX Float UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module temperature of sensor 2." ::= { moduleAuxiliaryMeasurementTemperature 2 } moduleAuxiliaryMeasurementTemperature2 OBJECT-TYPE SYNTAX Float UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module temperature of sensor 3." ::= { moduleAuxiliaryMeasurementTemperature 3 } moduleAuxiliaryMeasurementTemperature3 OBJECT-TYPE SYNTAX Float UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured module temperature of sensor 4." ::= { moduleAuxiliaryMeasurementTemperature 4 } ------------------------------------------------------------------------------- moduleConfigDataS OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Data raw access. This allows to read / write output channel specific system configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets " ::= { moduleEntry 1024 } moduleConfigDataU OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Data raw access. This allows to read / write output channel specific user configuration data. This OID is intended for use by WIENER system software only and my not be accessed directly. snmpget: undefined behavior snmpset: OCTET STRING format for reading data (8 octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit OCTET STRING format returned from the SNMP client, or used for writing data (8+n octets): offsetInOctets 4 octets / 32 bit numberOfOctets 4 octets / 32 bit data numberOfOctets octets " ::= { moduleEntry 1025 } ------------------------------------------------------------------------------- -- sensor ------------------------------------------------------------------------------- --Sensor ::= SEQUENCE { -- sensorNumber Integer32, -- sensorTable SensorTable --} sensorNumber OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of temperature sensors of the crate." ::= { sensor 1 } sensorTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A (conceptual table) of temperature sensor data." ::= { sensor 2 } sensorEntry OBJECT-TYPE SYNTAX SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) of the sensorTable." INDEX { sensorIndex } ::= { sensorTable 1 } SensorEntry ::= SEQUENCE { sensorIndex INTEGER, sensorTemperature INTEGER, -- sensorOkThreshold INTEGER, nicht implementiert (for futur) sensorWarningThreshold INTEGER, sensorFailureThreshold INTEGER, sensorAlarmThreshold INTEGER, sensorName DisplayString, sensorID OCTET STRING, sensorStatus INTEGER } sensorIndex OBJECT-TYPE SYNTAX INTEGER { temp1 (1), temp2(2), temp3(3), temp4(4), temp5(5), temp6(6), temp7(7), temp8(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each temperature sensor in the crate" ::= { sensorEntry 1 } sensorTemperature OBJECT-TYPE -- CHECK SYNTAX INTEGER { UNUSED(-128), (-127..127) } SYNTAX Integer32 (-128..127) UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured temperature of the sensor. Unused temperature probes have the special value -128" ::= { sensorEntry 2 } sensorWarningThreshold OBJECT-TYPE -- CHECK SYNTAX INTEGER { (0..126), DISABLED(127) } SYNTAX Integer32 (0..127) UNITS "deg.C" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured temperature of the sensor is higher than this value, the fan speed of the connected fan tray is increased. The value 127 has the special meaning: channel disabled. " ::= { sensorEntry 3} sensorFailureThreshold OBJECT-TYPE -- CHECK SYNTAX INTEGER { (0..126), DISABLED(127) } SYNTAX Integer32 (0..127) UNITS "deg.C" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured temperature of the sensor is higher than this value, the power supply switches off. The value 127 has the special meaning: channel disabled. " ::= { sensorEntry 4} --sensorOkThreshold OBJECT-TYPE -- CHECK SYNTAX INTEGER { (0..126), DISABLED(127) } -- SYNTAX Integer32 (0..127) -- UNITS "deg.C" -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "If the measured temperature of the sensor is ok, -- so it is possible to switch of the fans. -- The value 127 has the special meaning: channel disabled. -- " -- ::= { sensorEntry 5} sensorAlarmThreshold OBJECT-TYPE -- CHECK SYNTAX INTEGER { (0..126), DISABLED(127) } SYNTAX Integer32 (0..127) UNITS "deg.C" MAX-ACCESS read-write STATUS current DESCRIPTION "If the measured temperature of the sensor is much higher than this value, the fans rotate in full speed. The value 127 has the special meaning: channel disabled. " ::= { sensorEntry 6} sensorName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..7)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing a short name of the sensor. If the crate is equipped with an alphanumeric display, this string is shown to identify a sensor channel. " ::= { sensorEntry 7 } sensorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the 1-Wire Id of the corresponding Sensor." ::= { sensorEntry 8} sensorStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A bit field packed into an integer which define the Status of the Sensors after failures. For each Status value, a two-bit field exists. Bits-Value 00 Temperature is ok 01 Temperature is over WarningThreshold 10 Temperature is over AlarmThreshold 11 Temperature is over FailureThreshold The position of the bit fields in the integer value are: Bit 0, 1: Sensor1 Bit 2, 3: Sensor2 Bit 4, 5: Sensor3 Bit 6, 7: Sensor4 Bit 8, 9: Sensor5 Bit 10, 11: Sensor6 Bit 12, 13: Sensor7 Bit 14, 15: Sensor8" ::= { sensorEntry 9} --################ ------------------------------------------------------------------------------- -- communication ------------------------------------------------------------------------------- --Communication ::= SEQUENCE { -- snmp Snmp, -- tcpip Tcpip, -- http Http, -- telnet Telnet, -- canbus Canbus, -- rs232 RS232 --} ------------------------------------------------------------------------------- -- communication.snmp ------------------------------------------------------------------------------- snmp OBJECT-IDENTITY STATUS current DESCRIPTION "SNMP configuration." ::= { communication 1 } Snmp ::= SEQUENCE { snmpAccessRight INTEGER, snmpCommunityName OCTET STRING, snmpCommunityTable SnmpCommunityEntry, snmpPort INTEGER, ipDynamicAddress IpAddress, --OCTET STRING, ipStaticAddress IpAddress, --OCTET STRING, macAddress MacAddress } snmpCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SNMP community string table for different views." ::= { snmp 1 } snmpCommunityEntry OBJECT-TYPE SYNTAX SnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One table row." INDEX { snmpAccessRight } ::= { snmpCommunityTable 1 } SnmpCommunityEntry ::= SEQUENCE { snmpAccessRight INTEGER, snmpCommunityName OCTET STRING } snmpAccessRight OBJECT-TYPE SYNTAX INTEGER { public (1), private (2), admin (3), guru (4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each access right" ::= { snmpCommunityEntry 1 } snmpCommunityName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP community names for different views. The rights of the different communities are: public no write access private can switch power on/off, generate system reset admin can change supervision levels guru can change output voltage & current (this may destroy hardware if done wrong!) Setting a community name to a zero-length string completly disables the access to this view. If there is no higher- privileged community, the community name can only changed by direct access to the crate (not via network)! " ::= { snmpCommunityEntry 2} snmpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number of the SNMP protocol. A value of 0 disables all future SNMP communication! " ::= { snmp 2} httpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number of the HTTP (web) protocol. A value of 0 disables all HTTP access. " ::= { snmp 3} firmwareUpdate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "Send a update String" ::= { snmp 10} ipDynamicAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Ip which is currently used" ::= { snmp 11} ipStaticAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the Ip which is setted by user" ::= { snmp 12} macAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the MAC of the corresponding device" ::= { snmp 13} ------------------------------------------------------------------------------- -- communication.canTunnel ------------------------------------------------------------------------------- can OBJECT-IDENTITY STATUS current DESCRIPTION "CAN-Bus tunnel via SNMP." ::= { communication 2 } canBitRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Control of the CAN-Bus. The value defines the bit rate of the CAN-bus interface. A write disconnects the CAN interface from the ISEG modules and connects it to the SNMP communication. Both the receive and transmit fifos are cleared and the CAN interface is initialized with the selected bit rate. The special bit rate 0 disables the tunnel and switches back to normal operation. " ::= { can 1 } canReceive OBJECT-TYPE SYNTAX OCTET STRING (SIZE (14)) MAX-ACCESS read-only STATUS current DESCRIPTION "Control of the CAN-Bus Receive FIFO. A read access returns the total number of CAN messages stored in the receive fifo and the oldest message. This message is removed from the fifo. The OCTET STRING data is formatted according to the CANviaSNMP structure. " ::= { can 2 } canTransmit OBJECT-TYPE SYNTAX OCTET STRING (SIZE (14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Control of the CAN-Bus Transmit FIFO. A read access returns the total number of CAN messages stored in the transmit fifo and a NULL message. A write inserts the CAN message into the transmit fifo. This message will be transmitted via the CAN interface later. The total number of CAN messages stored in the transmit fifo and the recent message are returned. The OCTET STRING data is formatted according to the CANviaSNMP structure. " ::= { can 3 } canReceiveHv OBJECT-TYPE SYNTAX OCTET STRING (SIZE (14)) MAX-ACCESS read-only STATUS current DESCRIPTION "Control of the internal HV CAN-Bus on the backplane Receive FIFO. A read access returns the total number of CAN messages stored in the receive fifo and the oldest message. This message is removed from the fifo. The OCTET STRING data is formatted according to the CANviaSNMP structure. " ::= { can 4 } canTransmitHv OBJECT-TYPE SYNTAX OCTET STRING (SIZE (14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Control of the internal HV CAN-Bus on the backplane. A write access with: CANID=0x600 DLC=4 DATAID=0x1001 CONTROL will switch the HV modules into a special state. CONTROL=0x0001 - enable SNMP CAN access, stop the refresh cycle for the data points of the name space CONTROL=0x0002 - disable SNMP CAN access, activate the refresh cycle for the data points of the name space A write access unequal to CANID=0x600 will be transmitted to the HV CAN on the backplane. Such a message will be transmitted immediately via the CAN interface. The OCTET STRING data is formatted according to the CANviaSNMP structure. " ::= { can 5 } canBitRateHv OBJECT-TYPE SYNTAX Integer32 ( 125000..1000000 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Control of the bit rate of the HV CAN-Bus. The value defines the bit rate of the CAN-bus interface. Possible Values are 125000 and 250000. Changing this value requires MPODC slave firmware 1.10 or above. " ::= { can 6 } ------------------------------------------------------------------------------- -- communication.... ------------------------------------------------------------------------------- -- other future entries: -- +-tcpip -- | | -- | +- tcpipIpAddress -- | +- tcpipGateway -- | +- tcpipSubnetMask -- | +- tcpipNegotiation -- | +- tcpipMAC -- | -- +-http -- | | -- | +- httpPort -- | +- httpWriteEnable -- | -- +-telnet -- | | -- | +- telnetPort -- | -- +-canbus -- | | -- | +- address -- | +- address2 -- | +- speed -- | -- +-rs232 -- | | -- | +- ? ------------------------------------------------------------------------------- -- powersupply ------------------------------------------------------------------------------- Powersupply ::= SEQUENCE { --psFirmwareVersion DisplayString, psSerialNumber DisplayString, psOperatingTime Integer32, psDirectAccess OCTET STRING } --integrated in system.sysDesc --psFirmwareVersion OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The firmware version of the power supply main CPU." -- ::= { powersupply 1 } psSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the power supply." ::= { powersupply 2 } psOperatingTime OBJECT-TYPE SYNTAX Integer32 UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds for how long the power supply was switched on." ::= { powersupply 3 } psAuxiliaryNumber OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of auxiliary channels of the power supply." ::= { powersupply 4 } psAuxiliaryTable OBJECT-TYPE SYNTAX SEQUENCE OF PsAuxiliaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of psAuxiliary entries." ::= { powersupply 5 } psDirectAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "Direct data transfer to the UEP6000 power supply. A read access returns nothing, a write access returns the response of the power supply. " ::= { powersupply 1024 } ------------------------------------------------------------------------------ psAuxiliaryEntry OBJECT-TYPE SYNTAX PsAuxiliaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table row" INDEX { psAuxiliaryIndex } ::= { psAuxiliaryTable 1 } PsAuxiliaryEntry ::= SEQUENCE { psAuxiliaryIndex INTEGER, psAuxiliaryMeasurementVoltage Float, psAuxiliaryMeasurementCurrent Float } psAuxiliaryIndex OBJECT-TYPE SYNTAX INTEGER { u0(1),u1(2),u2(3),u3(4),u4(5),u5(6),u6(7),u7(8)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each power supply auxiliary channel. Its value ranges between 1 and total number of output channels. SMI index starts at 1, so index 1 corresponds to U0. " ::= { psAuxiliaryEntry 1 } psAuxiliaryMeasurementVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured power supply auxiliary output voltage." ::= { psAuxiliaryEntry 3 } psAuxiliaryMeasurementCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured power supply auxiliary output current." ::= { psAuxiliaryEntry 4 } ------------------------------------------------------------------------------- -- fantray ------------------------------------------------------------------------------- Fantray ::= SEQUENCE { -- fanFirmwareVersion DisplayString, fanSerialNumber DisplayString, fanOperatingTime Integer32, fanAirTemperature Integer32, fanSwitchOffDelay INTEGER, fanNominalSpeed Integer32, fanMaxSpeed Integer32, fanMinSpeed Integer32, fanNumberOfFans Integer32, fanConfigMaxSpeed Integer32, fanConfigMinSpeed Integer32, fanSpeedTable FanSpeedEntry } --integrated in system.sysDesc --fanFirmwareVersion OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The firmware version of the fan tray CPU." -- ::= { fantray 1 } fanSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION "The serial number of the fan tray." ::= { fantray 2 } fanOperatingTime OBJECT-TYPE SYNTAX Integer32 UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds for how long the fan tray was switched on." ::= { fantray 3 } fanAirTemperature OBJECT-TYPE SYNTAX Integer32 UNITS "deg.C" MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the fan tray inlet air." ::= { fantray 4 } fanSwitchOffDelay OBJECT-TYPE SYNTAX Integer32 (0 .. 900) UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time in seconds for which the fans will continue running after the power supply has been switched off. This feature is used to cool down the electronics after switching off. " ::= { fantray 5 } fanNominalSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The nominal fan rotation speed (RPM, Revolutions Per Minute) Value 0 does switch off the fans (only allowed if at least one rack temperature sensor is present). Values 1..1199 are not allowed " ::= { fantray 6 } fanNumberOfFans OBJECT-TYPE SYNTAX Integer32 ( 0..12 ) UNITS "Fans" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of installed fans" ::= { fantray 7 } fanSpeedTable OBJECT-TYPE SYNTAX SEQUENCE OF FanSpeedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of fanSpeedEntries." ::= { fantray 8 } fanSpeedEntry OBJECT-TYPE SYNTAX FanSpeedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table row" INDEX { fanNumber } ::= { fanSpeedTable 1 } FanSpeedEntry ::= SEQUENCE { fanNumber Integer32, fanSpeed Integer32 } fanNumber OBJECT-TYPE SYNTAX Integer32 ( 1..12 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each fan." ::= { fanSpeedEntry 1 } fanSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured fan rotation speed (RPM, Revolutions Per Minute)" ::= { fanSpeedEntry 2 } fanMaxSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The highest allowed rotationspeed of fan." ::= { fantray 9 } fanMinSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "The lowest allowed Rotationspeed of fan." ::= { fantray 10 } fanConfigMaxSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "Hardwarelimits. Can only set by WIENER." ::= { fantray 11 } fanConfigMinSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-write STATUS current DESCRIPTION "Hardwarelimits Can only set by WIENER." ::= { fantray 12 } ------------------------------------------------------------------------------- -- rack ------------------------------------------------------------------------------- -- this is reserved for futer items (BIN serial number, plug&play, ...) -- ################### ------------------------------------------------------------------------------- -- signal ------------------------------------------------------------------------------- Signal ::= SEQUENCE { numberOfAnalogInputs Integer32, analogInputTable AnalogInputEntry, -- numberOfAnalogOutputs Integer32, digitalInput BITS, digitalOutput BITS } numberOfAnalogInputs OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of additional analog inputs of the crate." ::= { signal 1 } analogInputTable OBJECT-TYPE SYNTAX SEQUENCE OF AnalogInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A (conceptual table) of analog input data." ::= { signal 2 } analogInputEntry OBJECT-TYPE SYNTAX AnalogInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) of the analogInputTable." INDEX { analogInputIndex } ::= { analogInputTable 1 } AnalogInputEntry ::= SEQUENCE { analogInputIndex INTEGER, analogMeasurementVoltage Float, analogMeasurementCurrent Float } analogInputIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number for each analog input of the crate" ::= { analogInputEntry 1 } analogMeasurementVoltage OBJECT-TYPE SYNTAX Float UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured voltage of the analog input." ::= { analogInputEntry 2 } analogMeasurementCurrent OBJECT-TYPE SYNTAX Float UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured current of the analog input." ::= { analogInputEntry 3 } digitalInput OBJECT-TYPE SYNTAX BITS { d0 (0) , d1 (1) , d2 (2) , d3 (3) , d4 (4) , d5 (5) , d6 (6) , d7 (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the digital inputs." ::= { signal 5 } digitalOutput OBJECT-TYPE SYNTAX BITS { d0 (0) , d1 (1) , d2 (2) , d3 (3) , d4 (4) , d5 (5) , d6 (6) , d7 (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the digital outputs." ::= { signal 6 } -- ################### ------------------------------------------------------------------------------- END