bump(deps): update dependency esbuild to ^0.15.15

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
esbuild	^0.15.13 -> ^0.15.15

---

Release Notes

evanw/esbuild

v0.15.15

Compare Source

• Remove duplicate CSS rules across files (#​2688)

  When two or more CSS rules are exactly the same (even if they are not adjacent), all but the last one can safely be removed:

  /* Before */
  a { color: red; }
  span { font-weight: bold; }
  a { color: red; }
  
  /* After */
  span { font-weight: bold; }
  a { color: red; }

  Previously esbuild only did this transformation within a single source file. But with this release, esbuild will now do this transformation across source files, which may lead to smaller CSS output if the same rules are repeated across multiple CSS source files in the same bundle. This transformation is only enabled when minifying (specifically when syntax minification is enabled).

• Add deno as a valid value for target (#​2686)

  The target setting in esbuild allows you to enable or disable JavaScript syntax features for a given version of a set of target JavaScript VMs. Previously Deno was not one of the JavaScript VMs that esbuild supported with target, but it will now be supported starting from this release. For example, versions of Deno older than v1.2 don't support the new ||= operator, so adding e.g. --target=deno1.0 to esbuild now lets you tell esbuild to transpile ||= to older JavaScript.

• Fix the esbuild-wasm package in Node v19 (#​2683)

  A recent change to Node v19 added a non-writable crypto property to the global object: https://github.com/nodejs/node/pull/44897. This conflicts with Go's WebAssembly shim code, which overwrites the global crypto property. As a result, all Go-based WebAssembly code that uses the built-in shim (including esbuild) is now broken on Node v19. This release of esbuild fixes the issue by reconfiguring the global crypto property to be writable before invoking Go's WebAssembly shim code.

• Fix CSS dimension printing exponent confusion edge case (#​2677)

  In CSS, a dimension token has a numeric "value" part and an identifier "unit" part. For example, the dimension token 32px has a value of 32 and a unit of px. The unit can be any valid CSS identifier. The value can be any number in floating-point format including an optional exponent (e.g. -3.14e-0 has an exponent of e-0). The full details of this syntax are here: https://www.w3.org/TR/css-syntax-3/.

  To maintain the integrity of the dimension token through the printing process, esbuild must handle the edge case where the unit looks like an exponent. One such case is the dimension 1e\32 which has the value 1 and the unit e2. It would be bad if this dimension token was printed such that a CSS parser would parse it as a number token with the value 1e2 instead of a dimension token. The way esbuild currently does this is to escape the leading e in the dimension unit, so esbuild would parse 1e\32 but print 1\65 2 (both 1e\32 and 1\65 2 represent a dimension token with a value of 1 and a unit of e2).

  However, there is an even narrower edge case regarding this edge case. If the value part of the dimension token itself has an e, then it's not necessary to escape the e in the dimension unit because a CSS parser won't confuse the unit with the exponent even though it looks like one (since a number can only have at most one exponent). This came up because the grammar for the CSS unicode-range property uses a hack that lets you specify a hexadecimal range without quotes even though CSS has no token for a hexadecimal range. The hack is to allow the hexadecimal range to be parsed as a dimension token and optionally also a number token. Here is the grammar for unicode-range:

  unicode-range =
    <urange>#
  
  <urange> =
    u '+' <ident-token> '?'*            |
    u <dimension-token> '?'*            |
    u <number-token> '?'*               |
    u <number-token> <dimension-token>  |
    u <number-token> <number-token>     |
    u '+' '?'+
  

  and here is an example unicode-range declaration that was problematic for esbuild:

  @​font-face {
    unicode-range: U+0e2e-0e2f;
  }

  This is parsed as a dimension with a value of +0e2 and a unit of e-0e2f. This was problematic for esbuild because the unit starts with e-0 which could be confused with an exponent when appended after a number, so esbuild was escaping the e character in the unit. However, this escaping is unnecessary because in this case the dimension value already has an exponent in it. With this release, esbuild will no longer unnecessarily escape the e in the dimension unit in these cases, which should fix the printing of unicode-range declarations.

  An aside: You may be wondering why esbuild is trying to escape the e at all and why it doesn't just pass through the original source code unmodified. The reason why esbuild does this is that, for robustness, esbuild's AST generally tries to omit semantically-unrelated information and esbuild's code printers always try to preserve the semantics of the underlying AST. That way the rest of esbuild's internals can just deal with semantics instead of presentation. They don't have to think about how the AST will be printed when changing the AST. This is the same reason that esbuild's JavaScript AST doesn't have a "parentheses" node (e.g. a * (b + c) is represented by the AST multiply(a, add(b, c)) instead of multiply(a, parentheses(add(b, c)))). Instead, the printer automatically inserts parentheses as necessary to maintain the semantics of the AST, which means all of the optimizations that run over the AST don't have to worry about keeping the parentheses up to date. Similarly, the CSS AST for the dimension token stores the actual unit and the printer makes sure the unit is properly escaped depending on what value it's placed after. All of the other code operating on CSS ASTs doesn't have to worry about parsing escapes to compare units or about keeping escapes up to date when the AST is modified. Hopefully that makes sense.

• Attempt to avoid creating the node_modules/.cache directory for people that use Yarn 2+ in Plug'n'Play mode (#​2685)

  When Yarn's PnP mode is enabled, packages installed by Yarn may or may not be put inside .zip files. The specific heuristics for when this happens change over time in between Yarn versions. This is problematic for esbuild because esbuild's JavaScript package needs to execute a binary file inside the package. Yarn makes extensive modifications to Node's file system APIs at run time to pretend that .zip files are normal directories and to make it hard to tell whether a file is real or not (since in theory it doesn't matter). But they haven't modified Node's child_process.execFileSync API so attempting to execute a file inside a zip file fails. To get around this, esbuild previously used Node's file system APIs to copy the binary executable to another location before invoking execFileSync. Under the hood this caused Yarn to extract the file from the zip file into a real file that can then be run.

  However, esbuild copied its executable into node_modules/.cache/esbuild. This is the official recommendation from the Yarn team for where packages are supposed to put these types of files when Yarn PnP is being used. However, users of Yarn PnP with esbuild find this really annoying because they don't like looking at the node_modules directory. With this release, esbuild now sets "preferUnplugged": true in its package.json files, which tells newer versions of Yarn to not put esbuild's packages in a zip file. There may exist older versions of Yarn that don't support preferUnplugged. In that case esbuild should still copy the executable to a cache directory, so it should still run (hopefully, since I haven't tested this myself). Note that esbuild setting "preferUnplugged": true may have the side effect of esbuild taking up more space on the file system in the event that multiple platforms are installed simultaneously, or that you're using an older version of Yarn that always installs packages for all platforms. In that case you may want to update to a newer version of Yarn since Yarn has recently changed to only install packages for the current platform.

v0.15.14

Compare Source

• Fix parsing of TypeScript infer inside a conditional extends (#​2675)

  Unlike JavaScript, parsing TypeScript sometimes requires backtracking. The infer A type operator can take an optional constraint of the form infer A extends B. However, this syntax conflicts with the similar conditional type operator A extends B ? C : D in cases where the syntax is combined, such as infer A extends B ? C : D. This is supposed to be parsed as (infer A) extends B ? C : D. Previously esbuild incorrectly parsed this as (infer A extends B) ? C : D instead, which is a parse error since the ?: conditional operator requires the extends keyword as part of the conditional type. TypeScript disambiguates by speculatively parsing the extends after the infer, but backtracking if a ? token is encountered afterward. With this release, esbuild should now do the same thing, so esbuild should now correctly parse these types. Here's a real-world example of such a type:

  type Normalized<T> = T extends Array<infer A extends object ? infer A : never>
    ? Dictionary<Normalized<A>>
    : {
        [P in keyof T]: T[P] extends Array<infer A extends object ? infer A : never>
          ? Dictionary<Normalized<A>>
          : Normalized<T[P]>
      }

• Avoid unnecessary watch mode rebuilds when debug logging is enabled (#​2661)

  When debug-level logs are enabled (such as with --log-level=debug), esbuild's path resolution subsystem generates debug log messages that say something like "Read 20 entries for directory /home/user" to help you debug what esbuild's path resolution is doing. This caused esbuild's watch mode subsystem to add a dependency on the full list of entries in that directory since if that changes, the generated log message would also have to be updated. However, meant that on systems where a parent directory undergoes constant directory entry churn, esbuild's watch mode would continue to rebuild if --log-level=debug was passed.

  With this release, these debug log messages are now generated by "peeking" at the file system state while bypassing esbuild's watch mode dependency tracking. So now watch mode doesn't consider the count of directory entries in these debug log messages to be a part of the build that needs to be kept up to date when the file system state changes.

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.

[netlify]

✅ Deploy Preview for contented ready!

Name	Link
🔨 Latest commit	d4cf244
🔍 Latest deploy log	https://app.netlify.com/sites/contented/deploys/637b12f7a9f3e4000838621a
😎 Deploy Preview	https://deploy-preview-250--contented.netlify.app
📱 Preview on mobile	Toggle QR Code... Use your smartphone camera to open QR code link.

---

To edit notification comments on pull requests, go to your Netlify site settings.

[codecov]

Codecov Report

Merging #250 (d4cf244) into main (810cf92) will not change coverage.
The diff coverage is n/a.

@@           Coverage Diff           @@
##             main     #250   +/-   ##
=======================================
  Coverage   73.27%   73.27%           
=======================================
  Files           9        9           
  Lines         348      348           
  Branches       56       56           
=======================================
  Hits          255      255           
  Misses         82       82           
  Partials       11       11           

📣 We’re building smart automated test selection to slash your CI/CD build times. Learn more