A Open Source SCADA System with HTML5 HMI, build using the Django framework. If you like to setup your own SCADA system head over to http://pyscada.rtfd.io.
- HTML5 based HMI
- Supports the following industrial Protocols
- Modbus TCP/IP
- Modbus RTU
- Modbus ASCII
- Modbus Binary
- Phant http://phant.io/
- VISA https://pypi.python.org/pypi/PyVISA
- 1-Wire
- BACNet/IP (in development)
- Meter-Bus, MBus (in development)
- very low Hardware requirements for the Server
- core/HMI
- python 2.7
- django==1.11
- numpy>=1.6.0
- pillow
- python-daemon
- ModbusMaster
- pymodbus>=1.2
- HDF5Export
- h5py>=2.1.1
- SystemStatistics
- psutil
- VISA
- PyVisa >= 1.8
- BACNet/IP
- bacpypes
- 1-Wire
- OWFS
- PyOWNet
- Modbus TCP/RTU/BIN
- Visa (at least for the Devices in the visa/devices folder)
- Systemstat
- OneWire (only DS18B20)
- phant (no known issues)
- smbus (at least for the Devices in the smbus/device_templates folder)
- event (no known issues)
- export (no known issues)
- hmi (no known issues)
- Documentation
- SysV init daemon handling
- BACNet (due to the lack of hardware to test)
Detailed installation instruction can be found at: http://pyscada.rtfd.io .
- @cwraig wrote some nice Blog articles on different topics for using PyScada with the Raspberry Pi:
- PyScada on Raspberry PI for temperature monitoring with DS18B20 on 1-Wire – Part 1 – Software Installation
- PyScada on Raspberry PI for temperature monitoring with DS18B20 on 1-Wire – Part 2 – DS18B20 Hardware and Software
- PyScada on Raspberry PI for temperature monitoring with DS18B20 on 1-Wire – Part 3 – PyScada Basic Configuration
- PyScada on Raspberry PI for temperature monitoring with DS18B20 on 1-Wire – Part 4 – PyScada HMI Configuration
- PyScada on Raspberry PI for Modbus RTU
- Issue Tracker: https://github.com/trombastic/PyScada/issues
- Source Code: https://github.com/trombastic/PyScada
The project is licensed under the _GNU General Public License v3 (GPLv3)_. -