SeaDrive daemon with FUSE interface
sudo apt-get install autoconf automake libtool libevent-dev libcurl4-openssl-dev libgtk2.0-dev uuid-dev intltool libsqlite3-dev valac libjansson-dev libssl-dev
First, you shoud get the latest source of libsearpc with v3.2-latest tag and seadrive-fuse.
To build seadrive-fuse, you need first build libsearpc.
git clone --branch=v3.2-latest https://github.com/haiwen/libsearpc.git
cd libsearpc
./autogen.sh
./configure
make
sudo make install
To build seadrive-fuse, you need build libwebsockets.
Also you can build a higher version of libwebsockets by yourself. Since version 2.0.28, SeaDrive requires libwebsockets version >= 4.0.20. If the version provided by your distribution is lower than the required version, you can choose to disable this function by set --enable-ws to no. You can also build a higher version of libwebsockets by yourself.
git clone --branch=v4.3.0 https://github.com/warmcat/libwebsockets
cd libwebsockets
mkdir build
cd build
cmake ..
make
sudo make install
git clone https://github.com/haiwen/seadrive-fuse.git
cd seadrive-fuse
./autogen.sh
./configure
make
sudo make install
Note: If you plan to package for distribution, you should compile with the latest tag instead of the master branch. Sometimes the latest tag for seadrive-gui project (https://github.com/haiwen/seadrive-gui) is higher than the tag here. In such case you should follow the tag in this project. For example, the latest tag for seadrive-fuse is v2.0.6 while for seadrive-gui is v2.0.7. You should build the package based on v2.0.6 tag from seadrive-gui too. This is because sometimes there is no update related to Linux in the new versions so this project is not updated.