Wire.xxxx in library

[michapr]

Hi,
how to use the lib with an ESP32 (as sample) with two I2C interfaces?

Because of using the predefined Wire functions it is not possible to redefine the interface.

bool CCS811::i2cwrite(int regaddr, int count, const uint8_t * buf) {
Wire.beginTransmission(_slaveaddr);              // START, SLAVEADDR
Wire.write(regaddr); // Register address

Using following code (as sample) - it will not work:

TwoWire I2Cone = TwoWire(0);
TwoWire I2Ctwo = TwoWire(1);
...
I2Cone.begin(SDA1,SCL1,400000); // SDA pin 21, SCL pin 22 
I2Ctwo.begin(SDA2,SCL2,400000); // SDA pin 5, SCL pin 4 builtin OLED
...

As sample in CCS811Core was realized better:

CCS811Core::status CCS811Core::beginCore(TwoWire &wirePort)
{
	CCS811Core::status returnError = SENSOR_SUCCESS;
	
	_i2cPort = &wirePort; //Pull in user's choice of I2C hardware

	//Wire.begin(); //See issue 13 https://github.com/sparkfun/SparkFun_CCS811_Arduino_Library/issues/13
...

Maybe you could adapt it?

Thanks!

[maarten-pennings]

Like the idea, did not yet have the time.