diff --git a/README.md b/README.md
index af9ff282d..dde00bca2 100644
--- a/README.md
+++ b/README.md
@@ -339,6 +339,7 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
     [251]  Fine Offset / Ecowitt WH55 water leak sensor
     [252]  BMW Gen5 TPMS, multi-brand HUF, Continental, Schrader/Sensata
     [253]  Watts WFHT-RF Thermostat
+    [254]  Thermor DG950 Weather Station
 
 * Disabled by default, use -R n or a conf file to enable
 
diff --git a/include/rtl_433_devices.h b/include/rtl_433_devices.h
index 80419954f..20bc930da 100644
--- a/include/rtl_433_devices.h
+++ b/include/rtl_433_devices.h
@@ -261,6 +261,7 @@
     DECL(fineoffset_wh55) \
     DECL(tpms_bmw) \
     DECL(watts_thermostat) \
+    DECL(thermor) \
 
     /* Add new decoders here. */
 
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 40869dbca..56c670024 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -230,6 +230,7 @@ add_library(r_433 STATIC
     devices/thermopro_tp12.c
     devices/thermopro_tx2.c
     devices/thermopro_tx2c.c
+    devices/thermor.c
     devices/tpms_abarth124.c
     devices/tpms_ave.c
     devices/tpms_bmw.c
diff --git a/src/devices/thermor.c b/src/devices/thermor.c
new file mode 100644
index 000000000..0a6cfc989
--- /dev/null
+++ b/src/devices/thermor.c
@@ -0,0 +1,223 @@
+/** @file
+    Thermor DG950 weather station.
+
+    Copyright (C) 2024 Nicolas Gagné, Bruno OCTAU (ProfBoc75)
+    Copyright (C) 2024 Christian W. Zuckschwerdt <zany@triq.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+*/
+
+#include "decoder.h"
+
+/**
+Thermor DG950 weather station.
+
+The weather station is composed of:
+- Display Receiver DG950R, FCC test reports are available at: https://fccid.io/S24DG950R
+- Thermometer-Transmitter Sensor DG950, FCC test reports are available at: https://fccid.io/S24DG950
+- Wind Sensor (speed and direction) DG950
+- Rain Gauge Sensor (cumulative rainfall) DG950
+
+The manual is available at: https://fccid.io/S24DG950R/Users-Manual/USERS-MANUAL-522434
+Review of the station: https://www.home-weather-stations-guide.com/thermor-weather-station.html
+
+
+S.a #2879 open by Nicolas Gagné.
+
+RF raw Signal: 96 synchro pulses, 13 x [gap, start 1 bit 0, 8 bit]
+
+    {213}0000000000000000000000000c3adfe6b1f0f92eff258f4fe1f0f8
+
+Flex decoder:
+
+    rtl_433 -X 'n=thermor,m=OOK_PWM,s=750,l=2128,y=1438,g=3000,r=8000,get=byte:@1:{8}:%x'
+
+    {9}0c0, {9}758, {9}7f8, {9}358, {9}1f0, {9}1f0, {9}4b8, {9}7f8, {9}258, {9}1e8, {9}3f8, {9}0f8, {9}0f8
+
+Samples here from Nicolas Gagné:
+
+https://github.com/NicolasGagne/rtl_433_tests/tree/a20b49805ed7ba74db016ec43e2a34ccda8231a9/tests/Thermor%20DG950
+
+Data Layout: (normal mode)
+
+    Byte position             0          1          2          3           4           5          6          7          8          9         10         11         12
+    bit position     0 12345678 0 12345678 0 12345678 0 12345678 0 1234 5678 0 1234 5678 0 12345678 0 12345678 0 12345678 0 12345678 0 12345678 0 12345678 0 12345678
+    Data             X IIIIIIII X TEMP_INT X Rain_mm  X TEMP_CHK X WDIR FLAG X WDIR FLAG X AAAA_LSB X AAAA_MSB X BBBBBBBB X CCCC_CHK X TEMP_DEC X ???????? X Rain_mm+7
+
+All bytes are reflected/reverse8
+
+- II:{8}        ID
+- TEMP_INT:{8}  temperature interger part, offset +195, °C
+- TEMP_DEC:{8}  temperature decimal part, offset +245, scale 10
+- RTmm:{4}      rain rate in 0.1 mm
+- RCHK:{4}      rain rate in 0.1 mm offset +7 , used to check if same as RTmm
+- TEMP_CHK:{8}  Temp checksum
+- WDIR:{4}      wind direction, map table to be used
+- FLAG:{4}      if 1  = valid win dir, if 0 wind dir = unknown
+- A_L,  A_M,  B,  C_CHK :{8} values related to Wind Speed, C = A_L + A_M + B
+- ?:{8} or {4}  unknown values, fixed.
+- X:{1}         Bit start 0 is ignore
+
+
+*/
+
+static int thermor_decode(r_device *decoder, bitbuffer_t *bitbuffer)
+{
+    if (bitbuffer->num_rows != 13) {
+        return DECODE_ABORT_EARLY;
+    }
+
+    uint8_t b[13];
+
+    for (int row = 0; row < bitbuffer->num_rows; ++row) {
+        if (bitbuffer->bits_per_row[row] != 9) {
+            return DECODE_ABORT_EARLY;
+        }
+        // test is start bit = 0
+        if ((bitbuffer->bb[row][0] & 0x80) != 0) {
+            return DECODE_ABORT_EARLY;
+        }
+        // extract only the 8 bit, ignore the start bit 0
+        bitbuffer_extract_bytes(bitbuffer, row, 1, &b[row], 8);
+    }
+    // Test if Sync/pairing or normal signal
+    reflect_bytes(b,13);
+    decoder_log_bitrow(decoder, 1, __func__, b, sizeof(b) * 8, "Reflected");
+
+    int const wind_dir_degr[] = {157,45,135,67,180,22,112,90,225,337,247,315,202,0,270,292};
+
+    //sync pairing mode
+    if (b[0] == 0xff && b[1] == b[2] && b[1] == b[4] && b[1] == b[5] && b[1] == b[6] && b[1] == b[7] && b[1] == b[8] && b[1] == b[10]  ) {
+        int new_id = ~b[1] & 0xff;
+        /* clang-format off */
+        data_t *data = data_make(
+                "model",          "",           DATA_STRING, "Thermor-DG950",
+                "id",         "",               DATA_FORMAT, "%d", DATA_INT, new_id,
+                "pairing",         "Pairing?",  DATA_INT, 1,
+                "mic",            "Integrity",  DATA_STRING, "CHECKSUM",
+                NULL);
+        /* clang-format on */
+        decoder_output_data(decoder, data);
+        return 1;
+    }
+
+    else {
+        decoder_logf(decoder, 2, __func__, "Start decode ...");
+        float wind_ratio = 0;
+        int have_rain = 0;
+        int have_wdir = 0;
+        int have_wspd = 0;
+        int rain_rate1 = 0;
+        int rain_rate2 = 0;
+        int wind_dir_d = 0;
+        int wind_coef  = 0;
+        float wind_speed_kmh = 0;
+
+        int id        = ~b[0] & 0xff;
+        decoder_logf(decoder, 1, __func__, "ID %d", id);
+
+        // Temp Checksum
+        int temp_chk = (b[1] + b[10]) & 0xff;
+        if ( (temp_chk + 1) != (b[3] & 0xff) ) {
+            decoder_logf(decoder, 2, __func__, "Temp Check Sum failed %d %d", temp_chk, (b[3] & 0xff));
+            return DECODE_ABORT_EARLY;
+        }
+
+        float temp_int   = b[1] - 195;
+        float temp_dec   = (b[10] - 245) * 0.1f;
+        float temp_C     = temp_int + temp_dec;
+        decoder_logf(decoder, 2, __func__, "Temp %f", temp_C);
+
+        // Test if valid rain
+        rain_rate1 = (~b[2] & 0xff);
+        rain_rate2 = (~b[12] & 0xff) -7;
+        // Rain check
+        if (rain_rate1 != rain_rate2) {
+            decoder_log(decoder, 2, __func__, "Rain Check failed");
+            return DECODE_ABORT_EARLY;
+        }
+        have_rain = 1;
+        decoder_logf(decoder, 1, __func__, "Rain check passed ...");
+
+        // Test if valid wind direction
+        if ( b[4] != 0xff && b[5] != 0xff) {
+            if (b[4] != b[5]) {
+                decoder_log(decoder, 2, __func__, "Wind Direction Check failed");
+                return DECODE_ABORT_EARLY;
+            }
+            wind_dir_d  = wind_dir_degr[(b[4] & 0x0f)];
+            have_wdir = 1;
+        }
+
+        // Wind speed check sum
+        int wind_chk = (~b[6] + ~b[7] + ~b[8]) & 0xff;
+        if (wind_chk != (~b[9] & 0xff)) {
+            decoder_logf(decoder, 2, __func__, "Wind Check Sum failed %d %d", wind_chk, (~b[9] & 0xff));
+            return DECODE_ABORT_EARLY;
+        }
+        decoder_logf(decoder, 2, __func__, "Wind Speed check passed ...");
+        if (b[8] != 0xff ) {
+            uint16_t wind_speed_raw = (~b[6] & 0xff) | ((~b[7] & 0xff) << 8) ;
+            wind_coef  = ~b[8] & 0xff;
+            if (wind_speed_raw < 256) {
+                wind_ratio = (wind_speed_raw * -0.0001746) + 0.155;
+            }
+            else {
+                wind_ratio = 0.11;
+            }
+            wind_speed_kmh = wind_ratio * (wind_speed_raw - wind_coef + 45);
+            if (wind_speed_kmh < 0 ) {
+                wind_speed_kmh = 0;
+            }
+            have_wspd = 1;
+            decoder_logf(decoder, 2, __func__, "Wind Speed calc passed ...");
+        }
+
+        /* clang-format off */
+        data_t *data = data_make(
+                "model",          "",               DATA_STRING, "Thermor-DG950",
+                "id",             "",               DATA_FORMAT, "%d",    DATA_INT,    id,
+                "temperature_C",  "Temperature",    DATA_FORMAT, "%.1f C", DATA_DOUBLE, temp_C,
+                "rain_rate_mm_h", "Rain Rate",      DATA_COND, have_rain, DATA_FORMAT, "%.1f mm/h", DATA_DOUBLE, rain_rate1 * 0.1f,
+                "wind_dir_deg",   "Wind Direction", DATA_COND, have_wdir, DATA_INT,     wind_dir_d,
+                "wind_avg_km_h",  "Wind avg speed", DATA_COND, have_wspd, DATA_FORMAT, "%.1f km/h", DATA_DOUBLE, wind_speed_kmh,
+                //"wind_coef",      "Wind Coef",      DATA_COND, have_wspd, DATA_INT,     wind_coef,
+                //"wind_ratio",     "Wind Ratio",     DATA_COND, have_wspd, DATA_DOUBLE,  wind_ratio,
+                "pairing",         "Pairing?",      DATA_INT, 0,
+                "mic",            "Integrity",      DATA_STRING, "CHECKSUM",
+                NULL);
+        /* clang-format on */
+        decoder_output_data(decoder, data);
+        return 1;
+    }
+    return 0;
+}
+
+static char const *const output_fields[] = {
+        "model",
+        "id",
+        "temperature_C",
+        "wind_avg_km_h",
+        "rain_rate_mm_h",
+        "wind_dir_deg",
+        "wind_ratio",
+        "wind_coef",
+        "pairing",
+        "mic",
+        NULL,
+};
+
+r_device const thermor = {
+        .name        = "Thermor Weather Station DG950",
+        .modulation  = OOK_PULSE_PWM,
+        .short_width = 680,
+        .long_width  = 2100,
+        .sync_width  = 1438,
+        .gap_limit   = 3000,
+        .reset_limit = 8000,
+        .decode_fn   = &thermor_decode,
+        .fields      = output_fields,
+};