Skip to content

This the repo of spm tutorial pipelines reproduction

License

Notifications You must be signed in to change notification settings

mselimata/spmbasics

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

spmbasics, a reproduction attempt

DOI

Understanding and reproducing SPM Tutorials.

Table of contents

Overview

Version of the software used:MATLAB R2020b[reffered as MATLAB] & SPM12 (release 7771)[reffered as SPM].

This repo contains my reproduction of the SPM12 tutorials with MATLAB R020b and they will be reffered as original tutorial from now on.

You can download the data used for preprocessing in this tutorial from here. And the data used for event related fMRI analysis here.

You can find all the code in the src folder.

By running data downloading and copying code, you download and unzip all the data.

Input data folder general view: data folder To be able test the reproducibility afterwards, the script creates three copies of the original data, in your /data/output/ folder.

For example MoAEpilot_script should contain the files to run the script interface. Output data folder with differently named copies of the input data. output folder

How to Reproduce Each Step

A. Block design fMRI preprocessing steps

First thing before the running the pipelines, add SPM to your path in MATLAB, via addpath /path/of/your/spm12/. Because all the scripts in this repo are calling SPM.

At the first lines of the all scripts, there is a section defining the data root which requires that /spmbasics folder to be specifically to be under your home directory. If you wish to use any other path, you may need to redefine relative to your home directory.

The corresponding root variable in the scripts should be adjusted accordingly to be able to load dataset.

Here is an example setting showing the MoAEpilot folder under /data/MoAEpilot the corresponding line in your script should look like root = fullfile(home, 'spmbasics', '/data/MoAEpilot').

For the face fMRI data root = fullfile(home, 'spmbasics', '/data/face_rep).

If you edit the folder names keep the edits in the code as well.

Your folder structure should look like the example below:

folder_basics

The data folder name in the root should be edited beforehand according to the pipelines, to avoid overwriting to the same folder.

As a last reminder, most of the scripts meant to run in a clear window with no parameters. For the preprocessing pipelines there may not be any issue. But the analysis and modelling pipelines, strictly require to have a clear window to avoid clashing parameters under the same variable names. So as a rule it would be useful to clc and clear all or clear matlabbatch before, and/or after each time running the scripts.

Now steps of running these scripts:

All the scripts meant to run without loading the gui and all the dependencies are following the relative paths of your spmbasics folder.

To avoid redundancies in this long README, I do not repeat the steps explained at the original preprocessing tutorial.

If you want to load the scripts in this repo using the GUI interface it is possible and could be done by selecting data folder in similar methodology in the original tutorial. Below, I am mainly explaining running codes in this repo as scripts.

1. GUI Interface

All the, .m files in the folder src/batch_step and they must be run subsequently.

  1. Load and run realignment_batch.m first. Then run the script. It should produce a file starting with mean and r.
  2. Then run slice timing_batch.m Run the script. It should produce a file starting with and ar.
  3. Follow by coregistration_batch.m. Run the script and your anatomical images now be coregistered to the mean that we obtained at the realignment step. That means the header of the anatomical file changed after this step.
  4. Continue by running segmentation_batch.m Segmentation script produce different segmentations and the deformation field y_sub-01_T1w.nii in the /anat/ folder according to the predefined tissue probability maps.
  5. Load and run normalization_batch.m This script produces files starting with war
  6. Lastly smoothing_batch.m This script produces the files starting with s and at the end in the /func folder there must be a version of the subject file starting with swar
2. Batch Interface

For the Batch interface inside /batch folder preprocessing_batch_job.m should be run.

  • If you want to follow the GUI, steps below:

    1. Load the batch interface GUI at the first step of the Batch interface Realign: Estimate &Reslice select your data by specifiying Data> Session. And the rest is the same with the tutorial.

    2. The rest of the script should run automatically using the relative paths of your data.

  • If it does not work, follow the steps in the original preprocessing tutorial to define paths of your anatomical data.

3. Scripting
  • To be able to run the scripting, in /script folder, /preprocessing_script_job.m is the main file and it should be run.
    • In this tutorial I only edited and used preprocessing_script_job.m solely.

    • NOTE: In the ideal setting, preprocessing_script.m controls the job of preprocessing_script_job.m, but currently preprocessing_script.m is redundant so does not exist in this repo.

B. Block Design fMRI First Level Analysis Steps

Relative path settings are the same as Block Design fMRI Preprocessing for the first_level_analysis. First level analysis design script is setting all the necessary parameters and the rest of the two scripts are depending on the resulting SPM.mat under the /first_level_analysis_script folder.

1. First Level Analysis GUI Interface
  • Run first_level_specification_gui.m firstly it will form the SPM.mat file at the /first_level_analysis_gui folder.
  • And then run first_level_estimation_gui.m
  • To be able to obtain the T staticstics and perform inference and rendering, original first level analysis tutorial should be followed.
  • At the end, it is possible to get a rendered figure showing activations: gui_figure
2. First Level Analysis Scripting
  • All the scripts should be loaded subsequently,

    1. first_level_specification_script.m produces the SPM.mat file in the first_level_specification_script``` folder. The following scripts are taking this file as an input.
    2. The first_level_estimation_script.m does the GLM estimation.
    3. first_level_inference_script.m does the rendering. Calculates the estimation parameters and the T level statistics.

Resulting render can be seen here : script_figure

C. Event-related fMRI Steps

I followed all the tutorial for sake of completion but focused on making event related preprocessing, categorical and parametric modelling steps mainly.

1-A. GUI Interface Preprocessing

This part is following exact steps of the original tutorial. All the code files exported from the saved mat files.

  • All the, .m files in the folder src/event_related_gui/preprocessing and they must be run subsequently.
    1. Load & run realign.m first. Then run the script. It should produce a file starting with mean and r.

    2. Then run slice timing.m Run the script. It should produce a file starting with and ar.

    3. Follow it by coreg.job.m. Run the script and your anatomical images now be coregistered to the mean that we obtained at the realignment step.

    4. Continue by running segmentat.m Segmentation script produce different segmentations and the deformation field, in the /anat/ folder according to the predefined tissue probability maps. 4a. To make segmentation results same as Nipype, there are some tweaks necessary. We are not calculating deformation field and the bias corrected images and the relative segmentations, to active this run: [segmentation nipype tweak]src/batch_step/(segmentation_nipype_adjust.m) 5a. To achive Nipype reproduciblity, run file copy script to copy the nipype calculated deformation field and bias corrected files*. Then move to the next step.

    5. Run normalise.m This script produces files starting with war

    6. Lastly smooth.m This script produces the files starting with s and at the end in the /func folder there must be a version of the subject file starting with swar

    • Note: Due to a possible template difference between Nipype and SPM, we are tweaking some settings to achive reproducibility.
1-B. Preprocessing via scripting

Run src/event_related_script/event_related_preprocessing_script.m. And it should produce the exact same files with the gui interface in one step.

2. Categorical Modelling

As a start, make sure that the file containing stimulus onset times in the dataset folder named sots.mat is loaded in the workspace. The scripting file is automatically loading it.

GUI Interface:

In src/event_related_gui/categorical folder, Firstly run categorical_spec.m firstly it will form the SPM.mat file, at the /event_related_gui folder. And then run categorical_est.job.m to do model estimation.

The further steps about the inference of the results is on the event related tutorial page.

The figure highlighting the fstatistics can be seen here : ergui_figure

Scripting:

Run src/event_related_script/categorical_modelling.m.

It produces same result with the gui interface.

Resulting sample figure can be seen here : erscript_figure

3. Parametric Modelling

Similar to the categorical modelling, sots.mat is necessary to be loaded in the workspace.

GUI interface:

Run parametric_spec.m firstly it will form the SPM.mat file at the /event_related_gui folder. And then run parametric_est.job.m

The section describing inference steps to obtain the figure is on the original event related tutorial.

Parametric lag effect can be seen like in this figure : eventlag_figure

Scripting:

Run src/event_related_script/parametric_modelling.m. It produces same result with the gui interface in single step.

Resulting figure is here : eventlagsc_figure

4. Bayesian Analysis is omitted for this tutorial.
  • Run bayesian_spec.m firstly it will form the SPM.mat file at the /event_related_gui folder. And then run bayesian_est.job.m.

The inference should be followed at the original event related tutorial.

D. Nipype-SPM reproduction steps

Nipype is a python interface for multiple neuroimaging analysis packages to enable interoperability of the workflows. Using Nipype SPM interface all the aforementioned steps are re-implemented.

As the main environment manager conda is used. To install nipype this guide and setting these dependencies recommended. It is also recommmended to check the nipype documentation

Using the spmbasics.yml file, it is possible to set the exact environment used during these experiments.

Note: The conda environment set as a general container to use when needed. Hence it has many other packages which are not directly relevant to this repo.

To be able to run functions of SPM from nipype we need to make sure that MATLAB is reachable. To test the setup and connection between Nipype and MATLAB, you may use this src/Nipype/nipype_mlab_hello.py script. If it is working it should print:

hello_world

The script also shows the SPM version, if spm.SPMCommand().version prints 12.7771 or the same version of yours, it indicates that SPM is found by Nipype.

For the modelling step, to avoid the common error of ```SPM is not on the MATLAB path, it may be necessary to also let matlab know about SPMs path.

mlab.MatlabCommand.set_default_paths('/your/path/of/MATLAB/spm12/')

Having these outputs without any error means that, Nipype interface is connected with SPM and MATLAB. 🥳

1. Block Design fMRI Preprocessing via Nipype-SPM

To reproduce the block design preprocessing using nipype preprocessing code run python nipype_spm_preproc.py command. Notebook version is also available as an alternative.

In addition to resulting preprocessed files, Nipype writes the worflow as graphs.

Nipype First Figure

A more detailed figure to check connections.

Nipype Detailed

When it works properly, datasink creates a separate folder of the desired outputs:

datasinked folder

2. Block Design fMRI First Level Analysis via Nipype-SPM

Run the first level analysis code file with python spm_firstlevel.py command. Or the Notebook to have the results.

Note: Notebook and code works but they are not producing the same figures with the SPM.

Workflow graph:

first level

Intensity graph of the normalized output:

intensity graph

3. Event-related fMRI via Nipype-SPM
3a. Preprocessing

Run the event related preprocessing code file using python spm_event_preproc.py command. Alternatively from Notebook you can obtain the same results.

Difference: Originally functional data is in analyze format, for convenience of the pipeline, it is merged as a 4D nifti.

Workflow graph: preprocess event

3b. Categorical Modelling

Run Event related categorical modelling code file via python spm_event_categorical.py command. or the Notebook.

Workflow graph: categorical graph

3c. Parametric Modelling

Run the event related parametric modelling code using python spm_event_categorical.py command. Notebook is also availabe as an alternative.

Workflow graph: Parametric graph

Further on reproducibility

Using Bash Script

SPM has a display and check reg features to visually inspect the outputs. Visual inspection does not guarantee that all the results are the same. To ensure about all of the steps producing same results after the same preprocessing steps, you can use this bash script. This script basically lists and compares the sha25sum values of the designated folders containing nifti files.

Instructions to check hash values using the provided bash script:

  • The script is in /src folder, named as shasum_checker.sh

  • Important note regarding to the base folder: Base folder should contain the results from the bstep by step gui interface interface. It is recommended to run the shasum_checker.sh on it once it is finished and then lock the writing access using chmod a=rx -R filename for linux.

To avoid loading everything at once it is possible to comment out within the script and perform tasks step by step.

  • REMINDER: Make sure to save your results of preprocessing into different folders and direct their paths accordingly. workflow setup script can be used to make sure about the input and output folder structure.

  • For example, for results which obtained from interface create a BATCH folder with the input data and make SPM run from there so it will create results of the batch interface.

  • You can see the results of your shasum comparisons as a text file in the /results folder.

Using python script

To keep every implementation in python, I present a revamped version of the the bash code. This script can calculate MSE, correlation coefficient and shasums. If requested it can work similar fashion with the aforementioned bash script, such as creating intermediate txt files of shasum values, comparing them, resulting with a output txt file. Ideally it is giving one output txt with the summary of all computations and comparisons.

Here are the steps how to use python script to obtain and compare shasums of the analysis outputs.

  • The script is in /src folder, named as compare_files.py

  • Run shasum checking python file via python compare_files.py or call a version of the script via calculate_compare_twolvl(input_folder1, input_folder2) depending on the input folder hierarchy.

  • It will generate and append new results to a new results file.

Comparing reproducibility with Nipype

For earlier steps, reproducibility comparison is basically comparing folders, with Nipype it is initially comparing folders but requires some dependency adjustements and edits. Those edited scripts are also provided with additional details.

Block preprocessing

Segmentation

In this step we are not saving deformation field and bias corrected file and relevant segmentation results. nipype adjusted script We use deformation field from nipype using copying script.

Normalization

Once it is done, you may see something similar to nipype block preproc reproduced file.

Last words/Notes

Lastly keep in mind that every instruction in this repo can change and serves the purpose of my learning and testing.

If you notice anything needs to be edited or fixed, feel free to open an issue.

Thanks for your time and attention. 😄

About

This the repo of spm tutorial pipelines reproduction

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Jupyter Notebook 78.0%
  • MATLAB 18.5%
  • Python 2.7%
  • Shell 0.8%