From 13b8a52c9ff1031900e220bb9a707f2681013df2 Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 28 Nov 2021 13:05:30 -0800 Subject: [PATCH 01/13] using my fork of breathe this fixes warning from pygments and weird multi-line function signatures (via CSS) --- COMMON_ISSUES.md | 2 +- Doxyfile | 1 + RF24.h | 173 +++++++++++++----------- docs/main_page.md | 4 +- docs/pico_sdk.md | 8 +- docs/sphinx/RF24_config_8h.rst | 2 + docs/sphinx/_static/custom_material.css | 32 +++++ docs/sphinx/conf.py | 35 +++-- docs/sphinx/md_common_issues.rst | 9 -- docs/sphinx/md_docs_pico_sdk.rst | 2 - docs/sphinx/requirements.txt | 2 +- 11 files changed, 159 insertions(+), 111 deletions(-) diff --git a/COMMON_ISSUES.md b/COMMON_ISSUES.md index edb37575e..358187290 100644 --- a/COMMON_ISSUES.md +++ b/COMMON_ISSUES.md @@ -100,7 +100,7 @@ You may find variants of the nRF24L01 transceiver that are marketed as “nRF24L [![ghetto_shielding_1.png](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_1.png)](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_1.png) [![ghetto_shielding_2.png](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_2.png)](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_2.png) -### My PA/LNA module doesnt perform as well as I'd hoped or the NRF radio works better on touching it +### My PA/LNA module doesn't perform as well as I'd hoped or the NRF radio works better on touching it As described above, the radio modules (notably the PA+LNA versions) are reliant on a stable power source. While these modules may work with a poor power supply, they often lose packets or fail to receive as many as a module with a better power source. Moreover, this can sometimes be seen in odd ways such as the radio module working better when touched. This again is likely a power stability issue because the radio module is missing a capacitor (a commonly neglected expense on behalf of the module's manufacturer). diff --git a/Doxyfile b/Doxyfile index a8cfab286..2e865668b 100644 --- a/Doxyfile +++ b/Doxyfile @@ -267,6 +267,7 @@ ALIASES += "see{1}=@rst .. seealso:: \1@endrst" ALIASES += "important{1}=@rst .. important:: \1@endrst" ALIASES += "hint{1}=@rst.. hint:: \1@endrst" ALIASES += "tip{1}=@rst.. tip:: \1@endrst" +ALIASES += "inlinerst=\xmlonlyembed:rst:inline " # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For diff --git a/RF24.h b/RF24.h index 9d4697cde..b6ec43abc 100644 --- a/RF24.h +++ b/RF24.h @@ -89,7 +89,7 @@ typedef enum { /** * @} * @defgroup CRCLength CRC length - * The length of a CRC checksum that is used (if any).
Cyclical Redundancy + * The length of a CRC checksum that is used (if any). Cyclical Redundancy * Checking (CRC) is commonly used to ensure data integrity. * @see * - RF24::setCRCLength() @@ -128,19 +128,19 @@ class RF24 { GPIO gpio; #endif - uint16_t ce_pin; /** "Chip Enable" pin, activates the RX or TX role */ - uint16_t csn_pin; /** SPI Chip select */ - uint32_t spi_speed; /** SPI Bus Speed */ + uint16_t ce_pin; /* "Chip Enable" pin, activates the RX or TX role */ + uint16_t csn_pin; /* SPI Chip select */ + uint32_t spi_speed; /* SPI Bus Speed */ #if defined (RF24_LINUX) || defined (XMEGA_D3) || defined (RF24_RP2) uint8_t spi_rxbuff[32+1] ; //SPI receive buffer (payload max 32 bytes) uint8_t spi_txbuff[32+1] ; //SPI transmit buffer (payload max 32 bytes + 1 byte for the command) #endif - uint8_t status; /** The status byte returned from every SPI transaction */ - uint8_t payload_size; /** Fixed size of payloads */ + uint8_t status; /* The status byte returned from every SPI transaction */ + uint8_t payload_size; /* Fixed size of payloads */ uint8_t pipe0_reading_address[5]; /** Last address set on pipe 0 for reading. */ - uint8_t config_reg; /** For storing the value of the NRF_CONFIG register */ - bool _is_p_variant; /** For storing the result of testing the toggleFeatures() affect */ - bool _is_p0_rx; /** For keeping track of pipe 0's usage in user-triggered RX mode. */ + uint8_t config_reg; /* For storing the value of the NRF_CONFIG register */ + bool _is_p_variant; /* For storing the result of testing the toggleFeatures() affect */ + bool _is_p0_rx; /* For keeping track of pipe 0's usage in user-triggered RX mode. */ protected: /** @@ -153,15 +153,18 @@ class RF24 { inline void endTransaction(); - bool ack_payloads_enabled; /** Whether ack payloads are enabled. */ - uint8_t addr_width; /** The address width to use (3, 4 or 5 bytes). */ - bool dynamic_payloads_enabled; /** Whether dynamic payloads are enabled. */ + /** Whether ack payloads are enabled. */ + bool ack_payloads_enabled; + /** The address width to use (3, 4 or 5 bytes). */ + uint8_t addr_width; + /** Whether dynamic payloads are enabled. */ + bool dynamic_payloads_enabled; /** * Read a chunk of data in from a register * * @param reg Which register. Use constants from nRF24L01.h - * @param buf Where to put the data + * @param[out] buf Where to put the data * @param len How many bytes of data to transfer * @note This returns nothing. Older versions of this function returned the status * byte, but that it now saved to a private member on all SPI transactions. @@ -191,17 +194,17 @@ class RF24 { * Creates a new instance of this driver. Before using, you create an instance * and send in the unique pins that this chip is connected to. * - * See [Related Pages](pages.html) for device specific information
+ * See [Related Pages](pages.html) for device specific information * * @param _cepin The pin attached to Chip Enable on the RF module * @param _cspin The pin attached to Chip Select (often labeled CSN) on the radio module. - *

For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) + * - For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) * is not supported. This means that the Due's pins 4, 10, or 52 are not mandated options (can use any digital output pin) for the radio's CSN pin. - * @param _spi_speed The SPI speed in Hz ie: 1000000 == 1Mhz

Users can specify default SPI speed by modifying - * `#define RF24_SPI_SPEED` in RF24_config.h - * - For Arduino, the default SPI speed will only be properly configured this way on devices supporting SPI TRANSACTIONS - * - Older/Unsupported Arduino devices will use a default clock divider & settings configuration - * - For Linux: The old way of setting SPI speeds using BCM2835 driver enums has been removed as of v1.3.7 + * @param _spi_speed The SPI speed in Hz ie: 1000000 == 1Mhz + * - Users can specify default SPI speed by modifying @ref RF24_SPI_SPEED in @ref RF24_config.h + * - For Arduino, the default SPI speed will only be properly configured this way on devices supporting SPI TRANSACTIONS + * - Older/Unsupported Arduino devices will use a default clock divider & settings configuration + * - For Linux: The old way of setting SPI speeds using BCM2835 driver enums has been removed as of v1.3.7 */ RF24(uint16_t _cepin, uint16_t _cspin, uint32_t _spi_speed = RF24_SPI_SPEED); @@ -209,11 +212,11 @@ class RF24 { * A constructor for initializing the radio's hardware dynamically * @warning You MUST use begin(uint16_t, uint16_t) or begin(_SPI*, uint16_t, uint16_t) to pass both the digital output pin * numbers connected to the radio's CE and CSN pins. - * @param _spi_speed The SPI speed in Hz ie: 1000000 == 1Mhz

Users can specify default SPI speed by modifying - * `#define RF24_SPI_SPEED` in RF24_config.h - * - For Arduino, the default SPI speed will only be properly configured this way on devices supporting SPI TRANSACTIONS - * - Older/Unsupported Arduino devices will use a default clock divider & settings configuration - * - For Linux: The old way of setting SPI speeds using BCM2835 driver enums has been removed as of v1.3.7 + * @param _spi_speed The SPI speed in Hz ie: 1000000 == 1Mhz + * - Users can specify default SPI speed by modifying @ref RF24_SPI_SPEED in @ref RF24_config.h + * - For Arduino, the default SPI speed will only be properly configured this way on devices supporting SPI TRANSACTIONS + * - Older/Unsupported Arduino devices will use a default clock divider & settings configuration + * - For Linux: The old way of setting SPI speeds using BCM2835 driver enums has been removed as of v1.3.7 */ RF24(uint32_t _spi_speed = RF24_SPI_SPEED); @@ -240,14 +243,14 @@ class RF24 { #if defined (RF24_SPI_PTR) || defined (DOXYGEN_FORCED) /** * Same as begin(), but allows specifying a non-default SPI bus to use. + * * @note This function assumes the `SPI::begin()` method was called before to * calling this function. * - * @warning This function is for the Arduino platform only + * @warning This function is for the Arduino platforms only * * @param spiBus A pointer or reference to an instantiated SPI bus object. - * - * @note The _SPI datatype is a "wrapped" definition that will represent + * The `_SPI` datatype is a "wrapped" definition that will represent * various SPI implementations based on the specified platform. * @see Review the [Arduino support page](md_docs_arduino.html). * @@ -258,19 +261,20 @@ class RF24 { /** * Same as begin(), but allows dynamically specifying a SPI bus, CE pin, * and CSN pin to use. + * * @note This function assumes the `SPI::begin()` method was called before to * calling this function. * - * @warning This function is for the Arduino platform only + * @warning This function is for the Arduino platforms only * * @param spiBus A pointer or reference to an instantiated SPI bus object. + * The `_SPI` datatype is a "wrapped" definition that will represent + * various SPI implementations based on the specified platform. * @param _cepin The pin attached to Chip Enable on the RF module * @param _cspin The pin attached to Chip Select (often labeled CSN) on the radio module. - *

For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) + * - For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) * is not supported. This means that the Due's pins 4, 10, or 52 are not mandated options (can use any digital output pin) for the radio's CSN pin. * - * @note The _SPI datatype is a "wrapped" definition that will represent - * various SPI implementations based on the specified platform. * @see Review the [Arduino support page](md_docs_arduino.html). * * @return same result as begin() @@ -283,7 +287,7 @@ class RF24 { * and CSN pin to use. * @param _cepin The pin attached to Chip Enable on the RF module * @param _cspin The pin attached to Chip Select (often labeled CSN) on the radio module. - *

For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) + * - For the Arduino Due board, the [Arduino Due extended SPI feature](https://www.arduino.cc/en/Reference/DueExtendedSPI) * is not supported. This means that the Due's pins 4, 10, or 52 are not mandated options (can use any digital output pin) for the radio's CSN pin. * @return same result as begin() */ @@ -348,7 +352,7 @@ class RF24 { * the data about the pipe number that received the next available payload * is "unreliable" during a FALLING transition on the IRQ pin. This means * you should call whatHappened() before calling this function - * during an ISR (Interrupt Service Routine).
For example: + * during an ISR (Interrupt Service Routine). For example: * @code * void isrCallbackFunction() { * bool tx_ds, tx_df, rx_dr; @@ -381,11 +385,13 @@ class RF24 { * `buf` parameter. The absolute maximum number of bytes that can be read * in one call is 32 (for dynamic payload lengths) or whatever number was * previously passed to setPayloadSize() (for static payload lengths). - * @remark Remember that each call to read() fetches data from the + * @remark + * @parblock + * Remember that each call to read() fetches data from the * RX FIFO beginning with the first byte from the first available * payload. A payload is not removed from the RX FIFO until it's * entire length (or more) is fetched using read(). - * @remarks + * * - If `len` parameter's value is less than the available payload's * length, then the payload remains in the RX FIFO. * - If `len` parameter's value is greater than the first of multiple @@ -397,7 +403,7 @@ class RF24 { * padding for the data saved to the `buf` parameter's object. * The nRF24L01 will repeatedly use the last byte from the last * payload even when read() is called with an empty RX FIFO. - * + * @endparblock * @note To use this function in the python wrapper, remember that * only the `len` parameter is required because this function (in the * python wrapper) returns the payload data as a buffer protocol object @@ -444,7 +450,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -518,7 +524,7 @@ class RF24 { * * @note Pipes 0 and 1 will store a full 5-byte address. Pipes 2-5 will technically * only store a single byte, borrowing up to 4 additional bytes from pipe 1 per the - * assigned address width.
+ * assigned address width. * Pipes 1-5 should share the same address, except the first byte. * Only the first byte in the array should be unique, e.g. * @code @@ -529,19 +535,24 @@ class RF24 { * openReadingPipe(3, addresses[3]); // address used is "4Node" * @endcode * - * @warning If the reading pipe 0 is opened by this function, the address + * @warning + * @parblock + * If the reading pipe 0 is opened by this function, the address * passed to this function (for pipe 0) will be restored at every call to - * startListening().
Read + * startListening(). + * + * Read * http://maniacalbits.blogspot.com/2013/04/rf24-addressing-nrf24l01-radios-require.html * to understand how to avoid using malformed addresses. This address * restoration is implemented because of the underlying necessary * functionality of openWritingPipe(). + * @endparblock * * @param number Which pipe to open. Only pipe numbers 0-5 are available, * an address assigned to any pipe number not in that range will be ignored. * @param address The 24, 32 or 40 bit address of the pipe to open. * - * @remark There is no address length parameter because this function will + * There is no address length parameter because this function will * always write the number of bytes (for pipes 0 and 1) that the radio * addresses are configured to use (set with setAddressWidth()). */ @@ -585,7 +596,7 @@ class RF24 { * setup(){ * Serial.begin(115200); * printf_begin(); - * ... + * // ... * } * @endcode * @@ -701,6 +712,7 @@ class RF24 { * FIFO buffers. * * @note This function is named `available_pipe()` in the python wrapper. + * @parblock * Additionally, the `available_pipe()` function (which * takes no arguments) returns a 2 item tuple containing (ordered by * tuple's indices): @@ -709,13 +721,15 @@ class RF24 { * - The pipe number that received the next available payload in the RX * FIFO buffers. If the item at the tuple's index 0 is `False`, then * this pipe number is invalid. - * @note To use this function in python: + * + * To use this function in python: * @code{.py} * # let `radio` be the instantiated RF24 object * has_payload, pipe_number = radio.available_pipe() # expand the tuple to 2 variables * if has_payload: * print("Received a payload with pipe", pipe_number) * @endcode + * @endparblock * * @param[out] pipe_num Which pipe has the payload available * @code @@ -730,7 +744,7 @@ class RF24 { * @warning According to the datasheet, the data saved to `pipe_num` is * "unreliable" during a FALLING transition on the IRQ pin. This means you * should call whatHappened() before calling this function during - * an ISR (Interrupt Service Routine).
For example: + * an ISR (Interrupt Service Routine). For example: * @code * void isrCallbackFunction() { * bool tx_ds, tx_df, rx_dr; @@ -821,7 +835,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -867,7 +881,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -897,7 +911,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -933,7 +947,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -1026,21 +1040,21 @@ class RF24 { * startListening(). * * @warning Only three of these can be pending at any time as there are - * only 3 FIFO buffers.
Dynamic payloads must be enabled. + * only 3 FIFO buffers. Dynamic payloads must be enabled. * * @note ACK payloads are dynamic payloads. Calling enableAckPayload() * will automatically enable dynamic payloads on pipe 0 (required for TX - * mode when expecting ACK payloads). To use ACK payloads on any other + * mode when expecting ACK payloads)& pipe 1. To use ACK payloads on any other * pipe in RX mode, call enableDynamicPayloads(). * * @param pipe Which pipe# (typically 1-5) will get this response. * @param buf Pointer to data that is sent * @param len Length of the data to send, up to 32 bytes max. Not affected - * by the static payload set by setPayloadSize(). + * by the static payload size set by setPayloadSize(). * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -1078,7 +1092,7 @@ class RF24 { * * @note This function expects no parameters in the python wrapper. * Instead, this function returns a 3 item tuple describing the IRQ - * events' status.
To use this function in the python wrapper: + * events' status. To use this function in the python wrapper: * @code{.py} * # let`radio` be the instantiated RF24 object * tx_ds, tx_df, rx_dr = radio.whatHappened() # get IRQ status flags @@ -1116,7 +1130,7 @@ class RF24 { * * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -1153,7 +1167,7 @@ class RF24 { * this condition, the transmission process is restarted. * @note The `len` parameter must be omitted when using the python * wrapper because the length of the payload is determined automatically. - *
To use this function in the python wrapper: + * To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * buffer = b"Hello World" # a `bytes` object @@ -1269,11 +1283,12 @@ class RF24 { * * The three main failure modes of the radio include: * - * Writing to radio: Radio unresponsive - Fixed internally by adding a timeout to the internal write functions in RF24 (failure handling) - * - * Reading from radio: Available returns true always - Fixed by adding a timeout to available functions by the user. This is implemented internally in RF24Network. - * - * Radio configuration settings are lost - Fixed by monitoring a value that is different from the default, and re-configuring the radio if this setting reverts to the default. + * 1. Writing to radio: Radio unresponsive + * - Fixed internally by adding a timeout to the internal write functions in RF24 (failure handling) + * 2. Reading from radio: Available returns true always + * - Fixed by adding a timeout to available functions by the user. This is implemented internally in RF24Network. + * 3. Radio configuration settings are lost + * - Fixed by monitoring a value that is different from the default, and re-configuring the radio if this setting reverts to the default. * * See the included example, GettingStarted_HandlingFailures * @@ -1333,7 +1348,7 @@ class RF24 { * 2476 MHz. * * @note In the python wrapper, this function is the setter of the - * `channel` attribute.
To use this function in the python wrapper: + * `channel` attribute.To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * radio.channel = 2 # set the channel to 2 (2402 MHz) @@ -1347,7 +1362,7 @@ class RF24 { * Get RF communication channel * * @note In the python wrapper, this function is the getter of the - * `channel` attribute.
To use this function in the python wrapper: + * `channel` attribute.To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * chn = radio.channel # get the channel @@ -1366,7 +1381,7 @@ class RF24 { * was sent to write(). * * @note In the python wrapper, this function is the setter of the - * `payloadSize` attribute.
To use this function in the python wrapper: + * `payloadSize` attribute.To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * radio.payloadSize = 16 # set the static payload size to 16 bytes @@ -1380,7 +1395,7 @@ class RF24 { * Get Static Payload Size * * @note In the python wrapper, this function is the getter of the - * `payloadSize` attribute.
To use this function in the python wrapper: + * `payloadSize` attribute.To use this function in the python wrapper: * @code{.py} * # let `radio` be the instantiated RF24 object * pl_size = radio.payloadSize # get the static payload size @@ -1428,7 +1443,7 @@ class RF24 { * @see setAutoAck() * * @note ACK payloads are dynamic payloads. This function automatically - * enables dynamic payloads on pipe 0 by default. Call + * enables dynamic payloads on pipes 0 & 1 by default. Call * enableDynamicPayloads() to enable on all pipes (especially for RX nodes * that use pipes other than pipe 0 to receive transmissions expecting * responses with ACK payloads). @@ -1446,7 +1461,7 @@ class RF24 { * Enable dynamically-sized payloads * * This way you don't always have to send large packets just to send them - * once in a while. This enables dynamic payloads on ALL pipes. + * once in a while. This enables dynamic payloads on ALL pipes. * */ void enableDynamicPayloads(void); @@ -1567,7 +1582,7 @@ class RF24 { * * @param level The desired @ref PALevel as defined by @ref rf24_pa_dbm_e. * @param lnaEnable Enable or Disable the LNA (Low Noise Amplifier) Gain. - * See table for Si24R1 modules below.
@p lnaEnable only affects + * See table for Si24R1 modules below. @p lnaEnable only affects * nRF24L01 modules with an LNA chip. * * | @p level (enum value) | nRF24L01
description | Si24R1
description when
@p lnaEnable = 1 | Si24R1
description when
@p lnaEnable = 0 | @@ -1584,7 +1599,7 @@ class RF24 { /** * Fetches the current @ref PALevel. * - * @return One of the values defined by @ref rf24_pa_dbm_e.
+ * @return One of the values defined by @ref rf24_pa_dbm_e. * See tables in @ref rf24_pa_dbm_e or setPALevel() */ uint8_t getPALevel(void); @@ -1619,14 +1634,15 @@ class RF24 { /** * Fetches the currently configured transmission @ref Datarate * - * @return One of the values defined by @ref rf24_datarate_e.
+ * @return One of the values defined by @ref rf24_datarate_e. * See table in @ref rf24_datarate_e or setDataRate() */ rf24_datarate_e getDataRate(void); /** * Set the @ref CRCLength (in bits) - *
CRC cannot be disabled if auto-ack is enabled + * + * CRC cannot be disabled if auto-ack is enabled * @param length Specify one of the values (as defined by @ref rf24_crclength_e) * | @p length (enum value) | description | * |:--------------------------:|:------------------------------:| @@ -1638,8 +1654,9 @@ class RF24 { /** * Get the @ref CRCLength (in bits) - *
CRC checking cannot be disabled if auto-ack is enabled - * @return One of the values defined by @ref rf24_crclength_e.
+ * + * CRC checking cannot be disabled if auto-ack is enabled + * @return One of the values defined by @ref rf24_crclength_e. * See table in @ref rf24_crclength_e or setCRCLength() */ rf24_crclength_e getCRCLength(void); @@ -1772,16 +1789,20 @@ class RF24 { * @deprecated For compatibility with old code only, see newer function * openReadingPipe() * - * @warning Pipes 1-5 should share the first 32 bits. + * @note Pipes 1-5 should share the first 32 bits. * Only the least significant byte should be unique, e.g. * @code * openReadingPipe(1, 0xF0F0F0F0AA); * openReadingPipe(2, 0xF0F0F0F066); * @endcode * - * @warning Pipe 0 is also used by the writing pipe so should typically be avoided as a reading pipe.
+ * @warning + * @parblock + * Pipe 0 is also used by the writing pipe so should typically be avoided as a reading pipe. * If used, the reading pipe 0 address needs to be restored at every call to startListening(). - *
See http://maniacalbits.blogspot.com/2013/04/rf24-addressing-nrf24l01-radios-require.html + * + * See http://maniacalbits.blogspot.com/2013/04/rf24-addressing-nrf24l01-radios-require.html + * @endparblock * * @param number Which pipe# to open, 0-5. * @param address The 40-bit address of the pipe to open. diff --git a/docs/main_page.md b/docs/main_page.md index 2c814d185..5290a569d 100644 --- a/docs/main_page.md +++ b/docs/main_page.md @@ -59,9 +59,7 @@ changes. Observe -![ - @image html pinout.jpg - ](https://github.com/nRF24/RF24/blob/master/images/pinout.jpg) +![@image HTML pinout.jpg](https://github.com/nRF24/RF24/raw/master/images/pinout.jpg) The table below shows how to connect the the pins of the NRF24L01(+) to different boards. CE and CSN are configurable. diff --git a/docs/pico_sdk.md b/docs/pico_sdk.md index cfdddee05..b24ca4b38 100644 --- a/docs/pico_sdk.md +++ b/docs/pico_sdk.md @@ -38,17 +38,17 @@ come from the Pico SDK repository's 1. Create a "build" directory in the RF24 repository's root directory and navigate to it: - ```shell + ```sh cd RF24 mkdir build cd build ``` 2. Configure CMake for your desired build type and specific RP2040-based board - ```shell + ```sh cmake ../examples_pico -DCMAKE_BUILD_TYPE=Release -DPICO_BOARD=pico ``` Or if building on a Windows PC: - ```shell + ```sh cmake -G "NMake Makefiles" ../examples_pico -DCMAKE_BUILD_TYPE=Release -DPICO_BOARD=pico ``` The supported RP2040-based boards are listed in header files in the Pico SDK @@ -56,7 +56,7 @@ come from the Pico SDK repository's If the `-DPICO_BOARD` option is not specified, then the Pico SDK will default to building for the Raspberry Pi Pico board. 3. Build the examples using the CMakeLists.txt file located in the RF24/examples_pico directory. - ```shell + ```sh cmake --build . --config Release ``` Notice we specified the build type again using the `--config` option. diff --git a/docs/sphinx/RF24_config_8h.rst b/docs/sphinx/RF24_config_8h.rst index 8bfe17def..009f9dda4 100644 --- a/docs/sphinx/RF24_config_8h.rst +++ b/docs/sphinx/RF24_config_8h.rst @@ -1,6 +1,8 @@ RF24_config.h ============= +.. doxygenfile:: RF24_config.h + .. literalinclude:: ../../RF24_config.h :linenos: :lineno-match: diff --git a/docs/sphinx/_static/custom_material.css b/docs/sphinx/_static/custom_material.css index aef855bd4..b0f81c6e7 100644 --- a/docs/sphinx/_static/custom_material.css +++ b/docs/sphinx/_static/custom_material.css @@ -83,6 +83,10 @@ html .md-nav--primary .md-nav__title--site .md-nav__button { /* ************* temp workaround styling multi-line API signatures ******************* */ /* In the future, we plan to do this without CSS in a more programatic way, but for now... */ +.md-typeset dl.objdesc>dt.sig-wrap .m + .sig-paren::before, +.md-typeset dl.api-field>dt.sig-wrap .m + .sig-paren::before, +.md-typeset dl.objdesc>dt.sig-wrap .k + .sig-paren::before, +.md-typeset dl.api-field>dt.sig-wrap .k + .sig-paren::before, .md-typeset dl.objdesc>dt.sig-wrap .n + .sig-paren::before, .md-typeset dl.api-field>dt.sig-wrap .n + .sig-paren::before { content: "\a "; @@ -90,11 +94,22 @@ html .md-nav--primary .md-nav__title--site .md-nav__button { } .md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .n:not(.sig-param)::before, +.md-typeset dl.api-field>dt.sig-wrap .sig-paren + .reference::before, +.md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .reference::before, .md-typeset dl.api-field>dt.sig-wrap .sig-paren + .n:not(.sig-param)::before, +.md-typeset dl.api-field>dt.sig-wrap .sig-paren + .k::before, +.md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .k::before, .md-typeset dl.objdesc>dt.sig-wrap .sig-param + .sig-param::before, +.md-typeset dl.api-field>dt.sig-wrap .n:not(.sig-param) + a::before, +.md-typeset dl.objdesc>dt.sig-wrap .n:not(.sig-param) + a::before, +.md-typeset dl.api-field>dt.sig-wrap a + .n:not(.sig-param)::before, +.md-typeset dl.objdesc>dt.sig-wrap a + .n:not(.sig-param)::before, +.md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .k::before, +.md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .k::before, .md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .kt::before, .md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .kt::before, .md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .n:not(.sig-param)::before, +.md-typeset dl.objdesc>dt.sig-wrap .n:not(.sig-param) + .n:not(.sig-param)::before, .md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .n:not(.sig-param)::before { content: "\a "; white-space: break-spaces; @@ -105,3 +120,20 @@ html .md-nav--primary .md-nav__title--site .md-nav__button { content: unset; white-space: pre; } + +/* CSS for Remark admonitions (translated by breathe from doxygen's @remark(s) cmd */ +:root { + --md-admonition-icon--remark: url('data:image/svg+xml;charset=utf-8,') +} +.md-typeset .admonition.remark { + border-color: rgb(116, 66, 255); +} +.md-typeset .remark > .admonition-title { + background-color: rgba(116, 66, 255, 0.1); + border-color: rgb(116, 66, 255); +} +.md-typeset .remark > .admonition-title::before { + background-color: rgb(116, 66, 255); + -webkit-mask-image: var(--md-admonition-icon--remark); + mask-image: var(--md-admonition-icon--remark); +} diff --git a/docs/sphinx/conf.py b/docs/sphinx/conf.py index 43cfb45ac..da92fb58e 100644 --- a/docs/sphinx/conf.py +++ b/docs/sphinx/conf.py @@ -1,8 +1,14 @@ -# Configuration file for the Sphinx documentation builder. -# -# This file only contains a selection of the most common options. For a full -# list see the documentation: -# https://www.sphinx-doc.org/en/master/usage/configuration.html +"""Configuration file for the Sphinx documentation builder. + +This file only contains a selection of the most common options. For a full +list see the documentation: +https://www.sphinx-doc.org/en/master/usage/configuration.html +""" +import subprocess +import os +import json + +# pylint: disable=invalid-name # -- Path setup -------------------------------------------------------------- @@ -10,12 +16,8 @@ # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # -# import os # import sys # sys.path.insert(0, os.path.abspath('.')) -import subprocess -import os -import json # -- Project information ----------------------------------------------------- @@ -81,6 +83,7 @@ # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # +# html_theme = "sphinx_rtd_theme" html_theme = "sphinx_immaterial" html_theme_options = { "features": [ @@ -121,7 +124,7 @@ "repo_name": "RF24", "repo_type": "github", # Visible levels of the global TOC; -1 means unlimited - "globaltoc_depth": 3, + "globaltoc_depth": -1, # If False, expand all TOC entries "globaltoc_collapse": False, # If True, show hidden TOC entries @@ -135,6 +138,10 @@ # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] +# These paths are either relative to html_static_path +# or fully qualified paths (eg. https://...) +html_css_files = ["custom_material.css"] + # The name of an image file (relative to this directory) to use as a favicon of # the docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. @@ -144,8 +151,6 @@ # project logo html_logo = "_static/Logo large.png" -# These paths are either relative to html_static_path -# or fully qualified paths (eg. https://...) -html_css_files = [ - "custom_material.css", -] +# split site index page into 2 pages: +# 1 with only alphabet-like links to partial lists, 1 with full listing +html_split_index = True diff --git a/docs/sphinx/md_common_issues.rst b/docs/sphinx/md_common_issues.rst index 26fecd73b..8a15d373c 100644 --- a/docs/sphinx/md_common_issues.rst +++ b/docs/sphinx/md_common_issues.rst @@ -3,12 +3,3 @@ Common Issues .. doxygenpage:: md_COMMON_ISSUES :content-only: - - -.. image:: ../../images/ghetto_sheilding_1.png - :target: https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_1.png - :height: 750 - -.. image:: ../../images/ghetto_sheilding_2.png - :target: https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_2.png - :height: 750 diff --git a/docs/sphinx/md_docs_pico_sdk.rst b/docs/sphinx/md_docs_pico_sdk.rst index 983a95367..9f9dd0078 100644 --- a/docs/sphinx/md_docs_pico_sdk.rst +++ b/docs/sphinx/md_docs_pico_sdk.rst @@ -1,7 +1,5 @@ Raspberry Pi Pico SDK ===================== -.. highlight:: cmake - .. doxygenpage:: md_docs_pico_sdk :content-only: diff --git a/docs/sphinx/requirements.txt b/docs/sphinx/requirements.txt index 1707fa2f1..385b887eb 100644 --- a/docs/sphinx/requirements.txt +++ b/docs/sphinx/requirements.txt @@ -1,2 +1,2 @@ -breathe +git+https://github.com/2bndy5/breathe@remix sphinx-immaterial From b22e435ce59b38c7a639946fec9b9cbe089434bd Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 13 Feb 2022 20:16:36 -0800 Subject: [PATCH 02/13] use breathe latest --- docs/sphinx/requirements.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/sphinx/requirements.txt b/docs/sphinx/requirements.txt index 385b887eb..1707fa2f1 100644 --- a/docs/sphinx/requirements.txt +++ b/docs/sphinx/requirements.txt @@ -1,2 +1,2 @@ -git+https://github.com/2bndy5/breathe@remix +breathe sphinx-immaterial From c3dc7468087049f9d4fa8b51f80aef5bed153a4c Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 13 Feb 2022 20:39:42 -0800 Subject: [PATCH 03/13] remove doc'd return of void func --- RF24.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/RF24.h b/RF24.h index b6ec43abc..023f99b01 100644 --- a/RF24.h +++ b/RF24.h @@ -479,14 +479,14 @@ class RF24 { * Addresses are assigned via a byte array, default is 5 byte address length * * @code - * uint8_t addresses[][6] = {"1Node", "2Node"}; - * radio.openWritingPipe(addresses[0]); + * uint8_t addresses[][6] = {"1Node", "2Node"}; + * radio.openWritingPipe(addresses[0]); * @endcode * @code - * uint8_t address[] = { 0xCC, 0xCE, 0xCC, 0xCE, 0xCC }; - * radio.openWritingPipe(address); - * address[0] = 0x33; - * radio.openReadingPipe(1, address); + * uint8_t address[] = { 0xCC, 0xCE, 0xCC, 0xCE, 0xCC }; + * radio.openWritingPipe(address); + * address[0] = 0x33; + * radio.openReadingPipe(1, address); * @endcode * * @warning This function will overwrite the address set to reading pipe 0 From e607b9a770ed9d5a75c38853bbf152e8eeb46aaf Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 13 Feb 2022 20:50:20 -0800 Subject: [PATCH 04/13] fix some spelling mistakes in common_issues doc --- COMMON_ISSUES.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/COMMON_ISSUES.md b/COMMON_ISSUES.md index 358187290..8f455639c 100644 --- a/COMMON_ISSUES.md +++ b/COMMON_ISSUES.md @@ -72,7 +72,7 @@ capacitors may not be good enough (depending on the manufacturing source). ### Payloads received/sent are inaccurate or printDetails() outputs the unexpected value(s) -This is likely due to the SPI speed being amped up to 10MHz by default. We recommend: +This is likely due to the SPI speed being set up to 10MHz by default. We recommend: 1. Make sure the wires are not loose, and try to avoid using long wires. 2. If the previous point does not help, then try lowering the SPI speed like so @@ -84,7 +84,7 @@ In the RF24 library's beginnings, the default value was (prior to 2014) set to 4 ### My PA/LNA module fails to transmit -You may find variants of the nRF24L01 transceiver that are marketed as “nRF24L01+PA+LNA”. These modules are distinct in the fact that they come with a detachable (SMA-type) antenna. They employ seperate RFX24C01 IC with the antenna for enhanced Power Amplification (PA) and Low Noise Amplification (LNA) features. While they boast greater range with the same functionality, they are subject to a couple lesser known (and lesser advertised) drawbacks: +You may find variants of the nRF24L01 transceiver that are marketed as “nRF24L01+PA+LNA”. These modules are distinct in the fact that they come with a detachable (SMA-type) antenna. They employ separate RFX24C01 IC with the antenna for enhanced Power Amplification (PA) and Low Noise Amplification (LNA) features. While they boast greater range with the same functionality, they are subject to a couple lesser known (and lesser advertised) drawbacks: 1. Stronger power source. Below is a chart of advertised current requirements that many MCU boards’ 3V regulators may not be able to provide (after supplying power to internal components). | Specification | Value | @@ -93,8 +93,7 @@ You may find variants of the nRF24L01 transceiver that are marketed as “nRF24L | Receive Mode current(peak) | 45 mA | | Power-down mode current | 4.2 µA | - -2. Needs shielding from electromagnetic interference. Shielding usually works best when it has a path to ground (GND pin), but this connection to the GND pin is not required. It is important that the sheilding does not touch any current carrying parts. +2. Needs shielding from electromagnetic interference. Shielding usually works best when it has a path to ground (GND pin), but this connection to the GND pin is not required. It is important that the shielding does not touch any current carrying parts. - Professionals tend to use a faraday cage/mesh to implement electromagnetic shielding, but it can be pricey for this scenario. - A quick do-it-yourself solution (as proof-of-concept) would be to wrap the PA/LNA module with electrical tape and then wrap foil around the electrical tape (for shielding) while being very careful to not let the foil touch any current carrying parts (like the GPIO pins, the antenna mount, and the soldier joints for the antenna mount). Observe [![ghetto_shielding_1.png](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_1.png)](https://github.com/nRF24/RF24/blob/master/images/ghetto_sheilding_1.png) From cbed8ec7be40af51835a6c1c7fa4f5fc377b2cb9 Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 24 Apr 2022 04:29:23 -0700 Subject: [PATCH 05/13] update CSS for sphinx-immaterial theme changes --- docs/sphinx/_static/custom_material.css | 62 ++----------------------- 1 file changed, 5 insertions(+), 57 deletions(-) diff --git a/docs/sphinx/_static/custom_material.css b/docs/sphinx/_static/custom_material.css index b0f81c6e7..7b55bb1c1 100644 --- a/docs/sphinx/_static/custom_material.css +++ b/docs/sphinx/_static/custom_material.css @@ -19,6 +19,7 @@ .md-typeset .admonition.seealso>.admonition-title { background-color: hsla(287, 100%, 63%, 0.25); + border-left-color: hsl(301, 100%, 63%); } .md-typeset .admonition.important>.admonition-title::before { @@ -44,6 +45,7 @@ .md-typeset .admonition.warning>.admonition-title { background-color: hsla(0, 100%, 63%, 0.25); + border-left-color: hsl(0, 100%, 63%); } html .md-nav--primary .md-nav__title--site .md-nav__button { @@ -53,17 +55,9 @@ html .md-nav--primary .md-nav__title--site .md-nav__button { height: auto; } -.md-typeset table:not([class]) th { - background-color: rgba(23, 35, 83, 0.8); -} - -.md-typeset table:not([class]) tr:hover { - background-color: rgba(56, 2, 81, 0.8); - box-shadow: inset 0 .05rem 0 #9515ff; -} - -[data-md-color-scheme="default"] { - --md-code-bg-color: #e8e7e7; +thead { + background-color: var(--md-default-fg-color--light); + color: var(--md-primary-bg-color); } .md-nav__title .md-nav__button.md-logo img, .md-nav__title .md-nav__button.md-logo svg { @@ -75,52 +69,6 @@ html .md-nav--primary .md-nav__title--site .md-nav__button { width: auto; } -.linenos { - background-color: var(--md-default-bg-color--light); - margin-right: 0.5rem; -} - -/* ************* temp workaround styling multi-line API signatures ******************* */ -/* In the future, we plan to do this without CSS in a more programatic way, but for now... */ - -.md-typeset dl.objdesc>dt.sig-wrap .m + .sig-paren::before, -.md-typeset dl.api-field>dt.sig-wrap .m + .sig-paren::before, -.md-typeset dl.objdesc>dt.sig-wrap .k + .sig-paren::before, -.md-typeset dl.api-field>dt.sig-wrap .k + .sig-paren::before, -.md-typeset dl.objdesc>dt.sig-wrap .n + .sig-paren::before, -.md-typeset dl.api-field>dt.sig-wrap .n + .sig-paren::before { - content: "\a "; - white-space: pre; -} - -.md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .n:not(.sig-param)::before, -.md-typeset dl.api-field>dt.sig-wrap .sig-paren + .reference::before, -.md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .reference::before, -.md-typeset dl.api-field>dt.sig-wrap .sig-paren + .n:not(.sig-param)::before, -.md-typeset dl.api-field>dt.sig-wrap .sig-paren + .k::before, -.md-typeset dl.objdesc>dt.sig-wrap .sig-paren + .k::before, -.md-typeset dl.objdesc>dt.sig-wrap .sig-param + .sig-param::before, -.md-typeset dl.api-field>dt.sig-wrap .n:not(.sig-param) + a::before, -.md-typeset dl.objdesc>dt.sig-wrap .n:not(.sig-param) + a::before, -.md-typeset dl.api-field>dt.sig-wrap a + .n:not(.sig-param)::before, -.md-typeset dl.objdesc>dt.sig-wrap a + .n:not(.sig-param)::before, -.md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .k::before, -.md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .k::before, -.md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .kt::before, -.md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .kt::before, -.md-typeset dl.api-field>dt.sig-wrap .n.sig-param + .n:not(.sig-param)::before, -.md-typeset dl.objdesc>dt.sig-wrap .n:not(.sig-param) + .n:not(.sig-param)::before, -.md-typeset dl.objdesc>dt.sig-wrap .n.sig-param + .n:not(.sig-param)::before { - content: "\a "; - white-space: break-spaces; -} - -.md-typeset dl.api-field>dt.sig-wrap .sig-param:before, -.md-typeset dl.objdesc>dt.sig-wrap .sig-param:before { - content: unset; - white-space: pre; -} - /* CSS for Remark admonitions (translated by breathe from doxygen's @remark(s) cmd */ :root { --md-admonition-icon--remark: url('data:image/svg+xml;charset=utf-8,') From a221c2210b85ca1278e06c7eafcbe82cea7bf025 Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Sun, 24 Apr 2022 09:45:25 -0700 Subject: [PATCH 06/13] don't create PDFs on RTD --- .readthedocs.yaml | 4 ---- 1 file changed, 4 deletions(-) diff --git a/.readthedocs.yaml b/.readthedocs.yaml index c8437755e..c853861af 100644 --- a/.readthedocs.yaml +++ b/.readthedocs.yaml @@ -14,10 +14,6 @@ build: sphinx: configuration: docs/sphinx/conf.py -# Optionally build your docs in additional formats such as PDF -formats: - - pdf - # install Python requirements required to build docs python: install: From 6adb6522dfbe3183ab0d7c0ea4690e29c4615141 Mon Sep 17 00:00:00 2001 From: 2bndy5 <2bndy5@gmail.com> Date: Mon, 25 Apr 2022 16:47:51 -0700 Subject: [PATCH 07/13] reduce Doxyfile to only the options used --- Doxyfile | 2240 +----------------------------------------------------- 1 file changed, 14 insertions(+), 2226 deletions(-) diff --git a/Doxyfile b/Doxyfile index 2e865668b..216e7bee0 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,5 +1,3 @@ -# Doxyfile 1.8.18 - # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # @@ -17,15 +15,6 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the configuration -# file that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# https://www.gnu.org/software/libiconv/ for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by # double-quotes, unless you are using Doxywizard) that should identify the # project for which the documentation is generated. This name is used in the @@ -34,25 +23,12 @@ DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = "Optimized high speed nRF24L01+ driver class documentation" -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = V1.3.9 - # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a # quick idea about the purpose of the project. Keep the description short. PROJECT_BRIEF = "TMRh20 2020 - Optimized fork of the nRF24L01+ driver" -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is # entered, it will be relative to the location where doxygen was started. If @@ -60,251 +36,6 @@ PROJECT_LOGO = OUTPUT_DIRECTORY = ./docs -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all generated output in the proper direction. -# Possible values are: None, LTR, RTL and Context. -# The default value is: None. - -OUTPUT_TEXT_DIRECTION = None - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = NO - -# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line -# such as -# /*************** -# as being the beginning of a Javadoc-style comment "banner". If set to NO, the -# Javadoc-style will behave just like regular comments and it will not be -# interpreted by doxygen. -# The default value is: NO. - -JAVADOC_BANNER = NO - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines (in the resulting output). You can put ^^ in the value part of an -# alias to insert a newline as if a physical newline was in the original file. -# When you need a literal { or } or , in the value part of an alias you have to -# escape them by means of a backslash (\), this can lead to conflicts with the -# commands \{ and \} for these it is advised to use the version @{ and @} or use -# a double escape (\\{ and \\}) - -ALIASES = "rst=\xmlonlyembed:rst:leading-asterisk^^" -ALIASES += "endrst=\endxmlonly" -ALIASES += "see{1}=@rst .. seealso:: \1@endrst" -ALIASES += "important{1}=@rst .. important:: \1@endrst" -ALIASES += "hint{1}=@rst.. hint:: \1@endrst" -ALIASES += "tip{1}=@rst.. tip:: \1@endrst" -ALIASES += "inlinerst=\xmlonlyembed:rst:inline " - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice -# sources only. Doxygen will then generate output that is more tailored for that -# language. For instance, namespaces will be presented as modules, types will be -# separated into more groups, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_SLICE = NO - # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it @@ -326,136 +57,6 @@ OPTIMIZE_OUTPUT_SLICE = NO EXTENSION_MAPPING = ino=c \ pde=c -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See https://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = YES - -# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up -# to that level are automatically included in the table of contents, even if -# they do not have an id attribute. -# Note: This feature currently applies only to Markdown headings. -# Minimum value: 0, maximum value: 99, default value: 5. -# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. - -TOC_INCLUDE_HEADINGS = 5 - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# If one adds a struct or class to a group and this option is enabled, then also -# any nested class or struct is added to the same group. By default this option -# is disabled and one has to add nested compounds explicitly via \ingroup. -# The default value is: NO. - -GROUP_NESTED_COMPOUNDS = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -470,92 +71,12 @@ LOOKUP_CACHE_SIZE = 0 EXTRACT_ALL = YES -# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual -# methods of a class will be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIV_VIRTUAL = NO - -# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = YES -# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO, -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. If set to YES, local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO, only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# declarations. If set to NO, these declarations will be included in the -# documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO, these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ @@ -565,45 +86,6 @@ INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES, the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will -# append additional text to a page's title, such as Class Reference. If set to -# YES the compound reference will be hidden. -# The default value is: NO. - -HIDE_COMPOUND_REFERENCE= NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. @@ -611,33 +93,6 @@ INLINE_INFO = YES SORT_MEMBER_DOCS = NO -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by # fully-qualified names, including namespaces. If set to NO, the class list will # be sorted only by class name, not including the namespace part. @@ -648,65 +103,12 @@ SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = YES -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo # list. This list is created by putting \todo commands in the documentation. # The default value is: YES. GENERATE_TODOLIST = NO -# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test -# list. This list is created by putting \test commands in the documentation. -# The default value is: YES. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if ... \endif and \cond -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES, the -# list will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This # will remove the Files entry from the Quick Index and from the Folder Tree View # (if specified). @@ -721,105 +123,16 @@ SHOW_FILES = YES SHOW_NAMESPACES = NO -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. If -# EXTRACT_ALL is set to YES then this flag will automatically be disabled. -# The default value is: NO. - -WARN_NO_PARAMDOC = NO - # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when # a warning is encountered. # The default value is: NO. WARN_AS_ERROR = YES -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning and error -# messages should be written. If left blank the output is written to standard -# error (stderr). - -WARN_LOGFILE = - #--------------------------------------------------------------------------- # Configuration options related to the input files #--------------------------------------------------------------------------- @@ -834,15 +147,6 @@ INPUT = ./ \ ./utility/Template \ ./docs -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses -# libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: https://www.gnu.org/software/libiconv/) for the list of -# possible encodings. -# The default value is: UTF-8. - -INPUT_ENCODING = UTF-8 - # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -902,13 +206,6 @@ FILE_PATTERNS = *.c \ *.as \ *.js - -# The RECURSIVE tag can be used to specify whether or not subdirectories should -# be searched for input files as well. -# The default value is: NO. - -RECURSIVE = NO - # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. @@ -919,13 +216,6 @@ RECURSIVE = NO EXCLUDE = Makefile \ configure -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. -# The default value is: NO. - -EXCLUDE_SYMLINKS = NO - # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. @@ -977,55 +267,6 @@ EXAMPLE_RECURSIVE = YES IMAGE_PATH = images -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command: -# -# -# -# where is the value of the INPUT_FILTER tag, and is the -# name of an input file. Doxygen will then use the output that the filter -# program writes to standard output. If FILTER_PATTERNS is specified, this tag -# will be ignored. -# -# Note that the filter must not add or remove lines; it is applied before the -# code is scanned, but not when the output code is generated. If lines are added -# or removed, the anchors will not be placed correctly. -# -# Note that for custom extensions or not directly supported extensions you also -# need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: pattern=filter -# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how -# filters are used. If the FILTER_PATTERNS tag is empty or if none of the -# patterns match the file name, INPUT_FILTER is applied. -# -# Note that for custom extensions or not directly supported extensions you also -# need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will also be used to filter the input files that are used for -# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). -# The default value is: NO. - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and -# it is also possible to disable source filtering for a specific pattern using -# *.ext= (so without naming a filter). -# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. - -FILTER_SOURCE_PATTERNS = - # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub @@ -1046,245 +287,22 @@ USE_MDFILE_AS_MAINPAGE = ./docs/main_page.md SOURCE_BROWSER = YES -# Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. -# The default value is: NO. +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- -INLINE_SOURCES = NO +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any -# special comment blocks from generated source code fragments. Normal C, C++ and -# Fortran comments will always remain visible. -# The default value is: YES. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# entity all documented functions referencing it will be listed. -# The default value is: NO. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES then for each documented function -# all documented entities called/used by that function will be listed. -# The default value is: NO. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES then the hyperlinks from functions in REFERENCES_RELATION and -# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will -# link to the documentation. -# The default value is: YES. - -REFERENCES_LINK_SOURCE = YES - -# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the -# source code will show a tooltip with additional information such as prototype, -# brief description and links to the definition and documentation. Since this -# will make the HTML file larger and loading of large files a bit slower, you -# can opt to disable this feature. -# The default value is: YES. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -SOURCE_TOOLTIPS = YES - -# If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in -# source browser. The htags tool is part of GNU's global source tagging system -# (see https://www.gnu.org/software/global/global.html). You will need version -# 4.8.6 or higher. -# -# To use it do the following: -# - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file -# - Make sure the INPUT points to the root of the source tree -# - Run doxygen as normal -# -# Doxygen will invoke htags (and that will in turn invoke gtags), so these -# tools must be available from the command line (i.e. in the search path). -# -# The result: instead of the source browser generated by doxygen, the links to -# source code will now point to the output of htags. -# The default value is: NO. -# This tag requires that the tag SOURCE_BROWSER is set to YES. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a -# verbatim copy of the header file for each class for which an include is -# specified. Set to NO to disable this. -# See also: Section \class. -# The default value is: YES. - -VERBATIM_HEADERS = YES - -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the -# cost of reduced performance. This can be particularly helpful with template -# rich C++ code for which doxygen's built-in parser lacks the necessary type -# information. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -# If clang assisted parsing is enabled you can provide the clang parser with the -# path to the compilation database (see: -# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files -# were built. This is equivalent to specifying the "-p" option to a clang tool, -# such as clang-check. These options will then be passed to the parser. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. - -CLANG_DATABASE_PATH = - -#--------------------------------------------------------------------------- -# Configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all -# compounds will be generated. Enable this if the project contains a lot of -# classes, structs, unions or interfaces. -# The default value is: YES. - -ALPHABETICAL_INDEX = YES - -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. -# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output -# The default value is: YES. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a -# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of -# it. -# The default directory is: html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each -# generated HTML page (for example: .htm, .php, .asp). -# The default value is: .html. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a -# standard header. -# -# To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. -# the setting GENERATE_TREEVIEW). It is highly recommended to start with a -# default header using -# doxygen -w html new_header.html new_footer.html new_stylesheet.css -# YourConfigFile -# and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally -# uses. -# Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description -# of the possible markers and block names see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard -# footer. See HTML_HEADER for more information on how to generate a default -# footer and what special commands can be used inside the footer. See also -# section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style -# sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. -# See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. -# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as -# it is more robust and this tag (HTML_STYLESHEET) will in the future become -# obsolete. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_STYLESHEET = - -# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined -# cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. -# This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefore more robust against future updates. -# Doxygen will copy the style sheet files to the output directory. -# Note: The order of the extra style sheet files is of importance (e.g. the last -# style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_STYLESHEET = doxygen-custom.css - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that the -# files will be copied as-is; there are no commands or markers available. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the style sheet and background images according to -# this color. Hue is specified as an angle on a colorwheel, see -# https://en.wikipedia.org/wiki/Hue for more information. For instance the value -# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 -# purple, and 360 is red again. -# Minimum value: 0, maximum value: 359, default value: 220. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors -# in the HTML output. For a value of 0 the output will use grayscales only. A -# value of 255 will produce the most vivid colors. -# Minimum value: 0, maximum value: 255, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the -# luminance component of the colors in the HTML output. Values below 100 -# gradually make the output lighter, whereas values above 100 make the output -# darker. The value divided by 100 is the actual gamma applied, so 80 represents -# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not -# change the gamma. -# Minimum value: 40, maximum value: 240, default value: 80. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_COLORSTYLE_GAMMA = 80 +HTML_EXTRA_STYLESHEET = doxygen-custom.css # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this @@ -1314,431 +332,6 @@ HTML_DYNAMIC_MENUS = NO HTML_DYNAMIC_SECTIONS = YES -# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries -# shown in the various tree structured indices initially; the user can expand -# and collapse entries dynamically later on. Doxygen will expand the tree to -# such a level that at most the specified number of entries are visible (unless -# a fully collapsed tree already exceeds this amount). So setting the number of -# entries 1 will produce a full collapsed tree by default. 0 is a special value -# representing an infinite number of entries and will result in a full expanded -# tree by default. -# Minimum value: 0, maximum value: 9999, default value: 100. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_INDEX_NUM_ENTRIES = 100 - -# If the GENERATE_DOCSET tag is set to YES, additional index files will be -# generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: https://developer.apple.com/xcode/), introduced with OSX -# 10.5 (Leopard). To create a documentation set, doxygen will generate a -# Makefile in the HTML output directory. Running make will produce the docset in -# that directory and running make install will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy -# genXcode/_index.html for more information. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_DOCSET = NO - -# This tag determines the name of the docset feed. A documentation feed provides -# an umbrella under which multiple documentation sets from a single provider -# (such as a company or product suite) can be grouped. -# The default value is: Doxygen generated docs. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# This tag specifies a string that should uniquely identify the documentation -# set bundle. This should be a reverse domain-name style string, e.g. -# com.mycompany.MyDocSet. Doxygen will append .docset to the name. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. -# The default value is: org.doxygen.Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. -# The default value is: Publisher. -# This tag requires that the tag GENERATE_DOCSET is set to YES. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three -# additional HTML index files: index.hhp, index.hhc, and index.hhk. The -# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on -# Windows. -# -# The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML -# files are now used as the Windows 98 help format, and will replace the old -# Windows help format (.hlp) on all Windows platforms in the future. Compressed -# HTML files also contain an index, a table of contents, and you can search for -# words in the documentation. The HTML workshop also contains a viewer for -# compressed HTML files. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_HTMLHELP = NO - -# The CHM_FILE tag can be used to specify the file name of the resulting .chm -# file. You can add a path in front of the file if the result should not be -# written to the html output directory. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_FILE = - -# The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. -# The file has to be specified with full path. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -HHC_LOCATION = - -# The GENERATE_CHI flag controls if a separate .chi index file is generated -# (YES) or that it should be included in the master .chm file (NO). -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -GENERATE_CHI = NO - -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) -# and project file content. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -CHM_INDEX_ENCODING = - -# The BINARY_TOC flag controls whether a binary table of contents is generated -# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it -# enables the Previous and Next buttons. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members to -# the table of contents of the HTML help documentation and to the tree view. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTMLHELP is set to YES. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that -# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help -# (.qch) of the generated HTML documentation. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify -# the file name of the resulting .qch file. The path specified is relative to -# the HTML output folder. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help -# Project output. For more information please see Qt Help Project / Namespace -# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt -# Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- -# folders). -# The default value is: doc. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_VIRTUAL_FOLDER = doc - -# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom -# filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- -# filters). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's filter section matches. Qt Help Project / Filter Attributes (see: -# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHP_SECT_FILTER_ATTRS = - -# The QHG_LOCATION tag can be used to specify the location of Qt's -# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the -# generated .qhp file. -# This tag requires that the tag GENERATE_QHP is set to YES. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be -# generated, together with the HTML files, they form an Eclipse help plugin. To -# install this plugin and make it available under the help contents menu in -# Eclipse, the contents of the directory containing the HTML and XML files needs -# to be copied into the plugins directory of eclipse. The name of the directory -# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. -# After copying Eclipse needs to be restarted before the help appears. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the Eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have this -# name. Each documentation set should have its own identifier. -# The default value is: org.doxygen.Project. -# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# If you want full control over the layout of the generated HTML pages it might -# be necessary to disable the index and replace it with your own. The -# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top -# of each HTML page. A value of NO enables the index and the value YES disables -# it. Since the tabs in the index contain the same information as the navigation -# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. If the tag -# value is set to YES, a side panel will be generated containing a tree-like -# index structure (just like the one that is generated for HTML Help). For this -# to work a browser that supports JavaScript, DHTML, CSS and frames is required -# (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can -# further fine-tune the look of the index. As an example, the default style -# sheet generated by doxygen has an example that shows how to put an image at -# the root of the tree instead of the PROJECT_NAME. Since the tree basically has -# the same information as the tab index, you could consider setting -# DISABLE_INDEX to YES when enabling this option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -GENERATE_TREEVIEW = NO - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. -# -# Note that a value of 0 will completely suppress the enum values from appearing -# in the overview section. -# Minimum value: 0, maximum value: 20, default value: 4. -# This tag requires that the tag GENERATE_HTML is set to YES. - -ENUM_VALUES_PER_LINE = 4 - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used -# to set the initial width (in pixels) of the frame in which the tree is shown. -# Minimum value: 0, maximum value: 1500, default value: 250. -# This tag requires that the tag GENERATE_HTML is set to YES. - -TREEVIEW_WIDTH = 250 - -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to -# external symbols imported via tag files in a separate window. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -EXT_LINKS_IN_WINDOW = NO - -# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg -# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see -# https://inkscape.org) to generate formulas as SVG images instead of PNGs for -# the HTML output. These images will generally look nicer at scaled resolutions. -# Possible values are: png The default and svg Looks nicer but requires the -# pdf2svg tool. -# The default value is: png. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_FORMULA_FORMAT = png - -# Use this tag to change the font size of LaTeX formulas included as images in -# the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML -# output directory to force them to be regenerated. -# Minimum value: 8, maximum value: 50, default value: 10. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - -# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands -# to create new LaTeX commands to be used in formulas as building blocks. See -# the section "Including formulas" for details. - -FORMULA_MACROFILE = - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# https://www.mathjax.org) which uses client side JavaScript for the rendering -# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX -# installed or if you want to formulas look prettier in the HTML output. When -# enabled you may also need to install MathJax separately and configure the path -# to it using the MATHJAX_RELPATH option. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -USE_MATHJAX = NO - -# When MathJax is enabled you can set the default output format to be used for -# the MathJax output. See the MathJax site (see: -# http://docs.mathjax.org/en/latest/output.html) for more details. -# Possible values are: HTML-CSS (which is slower, but has the best -# compatibility), NativeMML (i.e. MathML) and SVG. -# The default value is: HTML-CSS. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_FORMAT = HTML-CSS - -# When MathJax is enabled you need to specify the location relative to the HTML -# output directory using the MATHJAX_RELPATH option. The destination directory -# should contain the MathJax.js script. For instance, if the mathjax directory -# is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax -# Content Delivery Network so you can quickly see the result without installing -# MathJax. However, it is strongly recommended to install a local copy of -# MathJax from https://www.mathjax.org before deployment. -# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax -# extension names that should be enabled during MathJax rendering. For example -# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_EXTENSIONS = - -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces -# of code that will be used on startup of the MathJax code. See the MathJax site -# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an -# example see the documentation. -# This tag requires that the tag USE_MATHJAX is set to YES. - -MATHJAX_CODEFILE = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and -# should work on any modern browser. Note that when using HTML help -# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) -# there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then -# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to -# search using the keyboard; to jump to the search box use + S -# (what the is depends on the OS and browser, but it is typically -# , /