Testing Omron D6T-44L-06 sensor

You can check if your sensor Omron D6T-44L-06 is working properly on your Raspberry Pi.

This program generates a CSV file named 'Test.csv' including each of the 4x4 grid's temperature in celsius scale and timestamp corresponding to it.

CSV sample

2017/5/22 16:22:50.52441,30.3,29.7,27.6,29.6,27.3,27.4,27.4,27.5,27.3,27.3,27.4,27.7,31.2,30.4,27.5,30.3
2017/5/22 16:22:51.58987,30.4,29.7,27.8,29.7,27.4,27.6,27.5,27.6,27.3,27.4,27.4,27.6,30.0,28.6,27.4,30.3
2017/5/22 16:22:52.65286,30.4,29.8,27.8,29.3,27.4,27.6,27.6,27.4,27.3,27.4,27.4,27.8,27.3,27.7,27.7,29.3
2017/5/22 16:22:53.70892,30.4,29.8,27.8,29.2,27.4,27.6,27.5,27.4,27.3,27.3,27.5,27.4,27.3,27.2,27.2,27.7
2017/5/22 16:22:54.77558,30.3,29.7,27.7,29.2,27.4,27.5,27.4,27.4,27.2,27.3,27.4,27.2,27.3,27.1,27.0,27.5
2017/5/22 16:22:55.83788,30.3,29.7,27.7,29.2,27.3,27.5,27.4,27.3,27.2,27.3,27.4,27.3,27.2,27.1,27.1,27.5
...

How to Use

After cloning this repository, you can simply compile and run this code by doing as follows.

git clone https://github.com/nobuyukioishi/Omron_D6T-44L-06_Test_with_RasPi.git
cd Omron_D6T-44L-06_Test_with_RasPi
cd src
make

If you hasn't set up your Raspberry Pi for using the I2C port, see here to do it.

You may need to install the i2c-dev package as well with:

sudo apt-get install i2c-dev

Disclaimer

I mainly reused a code by Krisjanis Rijnieks's https://github.com/kr15h/omron-d6t-44l-06-rpi-of-test . I just modified some code in main.cpp file in order to output the sensor's data into CSV file.

I recommend you to refer his repository if my code has some problems.