diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index be984dd5a58c..ecb7ee42cbcd 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -22,11 +22,11 @@ POINTING_DEVICE_DRIVER = adns5050 The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. -| Setting | Description | Default | -| ------------------- | ------------------------------------------------------------------- | -------------------------- | -| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | -| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | -| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | +| Setting | Description | Default | +| ------------------- | ------------------------------------------------------------------ | -------------------------- | +| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | +| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | +| `ADNS5050_CS_PIN` | (Required) The pin connected to the Chip Select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | @@ -48,7 +48,7 @@ The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surfac | `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | | `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `ADNS9800_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI. @@ -124,7 +124,7 @@ Default attenuation is set to 4X, although if you are using a thicker overlay (s | `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | | `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | Default Scaling is 1024. Actual CPI depends on trackpad diameter. @@ -218,11 +218,14 @@ POINTING_DEVICE_DRIVER = pmw3389 The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI. Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking. +If you have different CS wiring on each half you can use `PMW33XX_CS_PIN_RIGHT` or `PMW33XX_CS_PINS_RIGHT` in combination with `PMW33XX_CS_PIN` or `PMW33XX_CS_PINS` to configure both sides independently. If `_RIGHT` values aren't provided, they default to be the same as the left ones. | Setting | Description | Default | | ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ | -| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | -| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ | +| `PMW33XX_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `PMW33XX_CS_PINS` | (Alternative) Sets the Chip Select pins connected to multiple sensors. | `{PMW33XX_CS_PIN}` | +| `PMW33XX_CS_PIN_RIGHT` | (Optional) Sets the Chip Select pin connected to the sensor on the right half. | `PMW33XX_CS_PIN` | +| `PMW33XX_CS_PINS_RIGHT` | (Optional) Sets the Chip Select pins connected to multiple sensors on the right half. | `{PMW33XX_CS_PIN_RIGHT}` | | `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ | | `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | | `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 2c6d91d5882d..81dca002e2df 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -9,8 +9,6 @@ #include "pmw33xx_common.h" #include "progmem.h" -extern const size_t pmw33xx_number_of_sensors; - uint16_t pmw33xx_get_cpi(uint8_t sensor) { if (sensor >= pmw33xx_number_of_sensors) { return 0; diff --git a/drivers/sensors/pmw33xx_common.c b/drivers/sensors/pmw33xx_common.c index b8d4e532ca32..82a7ec32973f 100644 --- a/drivers/sensors/pmw33xx_common.c +++ b/drivers/sensors/pmw33xx_common.c @@ -1,3 +1,4 @@ +// Copyright 2022 Pablo Martinez (@elpekenin) // Copyright 2022 Daniel Kao (dkao) // Copyright 2022 Stefan Kerkmann (KarlK90) // Copyright 2022 Ulrich Spörlein (@uqs) @@ -17,10 +18,11 @@ extern const uint8_t pmw33xx_firmware_data[PMW33XX_FIRMWARE_LENGTH] PROGMEM; extern const uint8_t pmw33xx_firmware_signature[3] PROGMEM; -static const pin_t cs_pins[] = PMW33XX_CS_PINS; -static bool in_burst[ARRAY_SIZE(cs_pins)] = {0}; +static const pin_t cs_pins_left[] = PMW33XX_CS_PINS; +static const pin_t cs_pins_right[] = PMW33XX_CS_PINS_RIGHT; -const size_t pmw33xx_number_of_sensors = ARRAY_SIZE(cs_pins); +static bool in_burst_left[ARRAY_SIZE(cs_pins_left)] = {0}; +static bool in_burst_right[ARRAY_SIZE(cs_pins_right)] = {0}; bool __attribute__((cold)) pmw33xx_upload_firmware(uint8_t sensor); bool __attribute__((cold)) pmw33xx_check_signature(uint8_t sensor); diff --git a/drivers/sensors/pmw33xx_common.h b/drivers/sensors/pmw33xx_common.h index c725e80f24b9..88523b8420ac 100644 --- a/drivers/sensors/pmw33xx_common.h +++ b/drivers/sensors/pmw33xx_common.h @@ -1,3 +1,4 @@ +// Copyright 2022 Pablo Martinez (@elpekenin) // Copyright 2022 Daniel Kao (dkao) // Copyright 2022 Stefan Kerkmann (KarlK90) // Copyright 2022 Ulrich Spörlein (@uqs) @@ -9,6 +10,7 @@ #pragma once +#include "quantum.h" //to get is_keyboard_left #include #include "spi_master.h" #include "util.h" @@ -79,6 +81,20 @@ _Static_assert(sizeof((pmw33xx_report_t){0}.motion) == 1, "pmw33xx_report_t.moti # endif #endif +// Support single spelling and default to be the same as left side +#if !defined(PMW33XX_CS_PINS_RIGHT) +# if !defined(PMW33XX_CS_PIN_RIGHT) +# define PMW33XX_CS_PIN_RIGHT PMW33XX_CS_PIN +# endif +# define PMW33XX_CS_PINS_RIGHT \ + { PMW33XX_CS_PIN_RIGHT } +#endif + +// Defines so the old variable names are swapped by the appropiate value on each half +#define cs_pins (is_keyboard_left() ? cs_pins_left : cs_pins_right) +#define in_burst (is_keyboard_left() ? in_burst_left : in_burst_right) +#define pmw33xx_number_of_sensors (is_keyboard_left() ? ARRAY_SIZE((pin_t[])PMW33XX_CS_PINS) : ARRAY_SIZE((pin_t[])PMW33XX_CS_PINS_RIGHT)) + #if PMW33XX_CPI > PMW33XX_CPI_MAX || PMW33XX_CPI < PMW33XX_CPI_MIN || (PMW33XX_CPI % PMW33XX_CPI_STEP) != 0U # pragma message "PMW33XX_CPI has to be in the range of " STR(PMW33XX_CPI_MAX) "-" STR(PMW33XX_CPI_MIN) " in increments of " STR(PMW33XX_CPI_STEP) ". But it is " STR(PMW33XX_CPI) "." # error Use correct PMW33XX_CPI value.