Test case: zpool_clear_001_pos.ksh #5634
Labels
Component: Test Suite
Indicates an issue with the test framework or a test case
Comments
behlendorf
added
the
Component: Test Suite
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
Jan 24, 2017
Associate disabled test cases with existing open issues, update update comments to be consistent and disable a few test cases. The goal is for all enabled test to pass reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
Jan 24, 2017
Associate disabled test cases with existing open issues, update comments to be consistent and disable a few additional test cases. The goal is for all enabled test to pass reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
Jan 25, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 - history_006_neg - openzfs#5657 - history_008_pos - openzfs#5658 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
Jan 25, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 - rsend_024_pos - openzfs#5665 - history_008_pos - openzfs#5658 - history_006_neg - openzfs#5657 - history_008_pos - openzfs#5658 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
Jan 26, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 - rsend_024_pos - openzfs#5665 - history_008_pos - openzfs#5658 - history_006_neg - openzfs#5657 - history_008_pos - openzfs#5658 - zfs_inherit_003_pos - openzfs#5669 Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
behlendorf
added a commit
that referenced
this issue
Jan 26, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - #5635 - zfs_rename_006_pos - #5647 - zfs_rename_009_neg - #5648 - zpool_clear_001_pos - #5634 - zfs_allow_010_pos - #5646 - reservation_018_pos - #5642 - snapused_004_pos - #5513 - rsend_022_pos - #5654 - rsend_024_pos - #5665 - history_008_pos - #5658 - history_006_neg - #5657 - history_008_pos - #5658 - zfs_inherit_003_pos - #5669 Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5649
wli5
pushed a commit
to wli5/zfs
that referenced
this issue
Feb 28, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 - rsend_024_pos - openzfs#5665 - history_008_pos - openzfs#5658 - history_006_neg - openzfs#5657 - history_008_pos - openzfs#5658 - zfs_inherit_003_pos - openzfs#5669 Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes openzfs#5649
wli5
pushed a commit
to wli5/zfs
that referenced
this issue
Feb 28, 2017
Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - openzfs#5635 - zfs_rename_006_pos - openzfs#5647 - zfs_rename_009_neg - openzfs#5648 - zpool_clear_001_pos - openzfs#5634 - zfs_allow_010_pos - openzfs#5646 - reservation_018_pos - openzfs#5642 - snapused_004_pos - openzfs#5513 - rsend_022_pos - openzfs#5654 - rsend_024_pos - openzfs#5665 - history_008_pos - openzfs#5658 - history_006_neg - openzfs#5657 - history_008_pos - openzfs#5658 - zfs_inherit_003_pos - openzfs#5669 Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes openzfs#5649
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
May 9, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which successed under Linux due to differences in the inuse checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loopback devices but it would be preerable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwritting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue openzfs#6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, thesei test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#3484 Issue openzfs#5634 Issue openzfs#2437 Issue openzfs#5202 Issue openzfs#4034 Issue openzfs#6095
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
May 9, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which successed under Linux due to differences in the inuse checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loopback devices but it would be preerable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwritting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue openzfs#6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, thesei test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#3484 Issue openzfs#5634 Issue openzfs#2437 Issue openzfs#5202 Issue openzfs#4034 Issue openzfs#6095
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
May 10, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which successed under Linux due to differences in the inuse checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loopback devices but it would be preerable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwritting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue openzfs#6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, thesei test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#3484 Issue openzfs#5634 Issue openzfs#2437 Issue openzfs#5202 Issue openzfs#4034 Issue openzfs#6095
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
May 11, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. Add O_EXCL to the in-use check to prevent the -f (force) option from working for mounted filesystems and improve the resulting error. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which successed under Linux due to differences in the inuse checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loopback devices but it would be preerable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwritting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue openzfs#6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, thesei test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#3484 Issue openzfs#5634 Issue openzfs#2437 Issue openzfs#5202 Issue openzfs#4034 Issue openzfs#6095
behlendorf
added a commit
to behlendorf/zfs
that referenced
this issue
May 11, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. Add O_EXCL to the in-use check to prevent the -f (force) option from working for mounted filesystems and improve the resulting error. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which successed under Linux due to differences in the inuse checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loopback devices but it would be preerable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwritting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue openzfs#6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, thesei test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue openzfs#3484 Issue openzfs#5634 Issue openzfs#2437 Issue openzfs#5202 Issue openzfs#4034 Issue openzfs#6095
behlendorf
added a commit
that referenced
this issue
May 11, 2017
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. Add O_EXCL to the in-use check to prevent the -f (force) option from working for mounted filesystems and improve the resulting error. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - 6ba1ce9 allows raidz+mirror configs with similar redundancy. Updating the valid_args and forced_args cases. * zpool_create_008_pos - Disable overlapping partition portion. * zpool_create_011_neg - Fix to correctly create the extra partition. Modified zpool_vdev.c to use fstat64_blk() wrapper which includes the st_size even for block devices. * zpool_create_012_neg - Updated to properly find swap devices. * zpool_create_014_neg, zpool_create_015_neg - Updated to use swap_setup() and swap_cleanup() wrappers which do the right thing on Linux and Illumos. Removed '-n' option which succeeds under Linux due to differences in the in-use checks. * zpool_create_016_pos.ksh - Skipped test case isn't useful. * zpool_create_020_pos - Added missing / to cleanup() function. Remove cache file prior to test to ensure a clean environment and avoid false positives. * zpool_destroy_001_pos - Removed test case which creates a pool on a zvol. This is more likely to deadlock under Linux and has never been completely supported on any platform. * zpool_destroy_002_pos - 'zpool destroy -f' is unsupported on Linux. Mount point must not be busy in order to unmount them. * zfs_destroy_001_pos - Handle EBUSY error which can occur with volumes when racing with udev. * zpool_expand_001_pos, zpool_expand_003_neg - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. The test could be modified to use loop-back devices but it would be preferable to use the test case as is for improved coverage. * zpool_export_004_pos - Updated test case to such that it doesn't depend on nested pools. Normal file vdev under /var/tmp are fine. * zpool_import_all_001_pos - Updated to skip partition 1, which is known as slice 2, on Illumos. This prevents overwriting the default TESTPOOL which was causing the failure. * zpool_import_002_pos, zpool_import_012_pos - No changes needed. * zpool_remove_003_pos - No changes needed * zpool_upgrade_002_pos, zpool_upgrade_004_pos - Root cause addressed by upstream OpenZFS commit 3b7f360. * zpool_upgrade_007_pos - Disabled in test case due to known failure. Opened issue #6112 * zvol_misc_002_pos - Updated to to use ext2. * zvol_misc_001_neg, zvol_misc_003_neg, zvol_misc_004_pos, zvol_misc_005_neg, zvol_misc_006_pos - Moved to skip list, these test case could be updated to use Linux's crash dump facility. * zvol_swap_* - Updated to use swap_setup/swap_cleanup helpers. File creation switched from /tmp to /var/tmp. Enabled minimal useful tests for Linux, skip test cases which aren't applicable. Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #3484 Issue #5634 Issue #2437 Issue #5202 Issue #4034 Closes #6095
|
Resolved by 8c54ddd. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
System information
Describe the problem you're observing
On kmemleak enabled and i686 kernels the zpool_clear_001_pos test case runs more slowly and can exceed the 10 minute test limit resulting in a failure.
Describe how to reproduce the problem
Reproducible during automated testing:
Include any warning/errors/backtraces from the system logs
http://build.zfsonlinux.org/builders/Ubuntu%2014.04%20i686%20%28TEST%29/builds/636/steps/shell_11/logs/log
The text was updated successfully, but these errors were encountered: