diff --git a/Makefile b/Makefile index 7447c49c8..5419765e6 100644 --- a/Makefile +++ b/Makefile @@ -73,6 +73,7 @@ endif KUSTOMIZE_STANDARD_OVERLAY := config/overlays/standard KUSTOMIZE_STANDARD_E2E_OVERLAY := config/overlays/standard-e2e +KUSTOMIZE_EXPERIMENTAL_OVERLAY := config/overlays/experimental export RELEASE_MANIFEST := operator-controller.yaml export RELEASE_INSTALL := install.sh @@ -82,6 +83,7 @@ export RELEASE_CATALOGS := default-catalogs.yaml MANIFEST_HOME := ./manifests STANDARD_MANIFEST := ./manifests/standard.yaml STANDARD_E2E_MANIFEST := ./manifests/standard-e2e.yaml +EXPERIMENTAL_MANIFEST := ./manifests/experimental.yaml CATALOGS_MANIFEST := ./manifests/default-catalogs.yaml # Manifest used by kind-deploy, which may be overridden by other targets @@ -154,6 +156,7 @@ manifests: $(CONTROLLER_GEN) $(KUSTOMIZE) #EXHELP Generate WebhookConfiguration, mkdir -p $(MANIFEST_HOME) $(KUSTOMIZE) build $(KUSTOMIZE_STANDARD_OVERLAY) > $(STANDARD_MANIFEST) $(KUSTOMIZE) build $(KUSTOMIZE_STANDARD_E2E_OVERLAY) > $(STANDARD_E2E_MANIFEST) + $(KUSTOMIZE) build $(KUSTOMIZE_EXPERIMENTAL_OVERLAY) > $(EXPERIMENTAL_MANIFEST) .PHONY: generate generate: $(CONTROLLER_GEN) #EXHELP Generate code containing DeepCopy, DeepCopyInto, and DeepCopyObject method implementations. @@ -261,7 +264,7 @@ test-e2e: run image-registry prometheus e2e e2e-metrics e2e-coverage kind-clean .PHONY: prometheus prometheus: PROMETHEUS_NAMESPACE := olmv1-system prometheus: PROMETHEUS_VERSION := v0.83.0 -prometheus: #HELP Deploy Prometheus into specified namespace +prometheus: #EXHELP Deploy Prometheus into specified namespace ./hack/test/setup-monitoring.sh $(PROMETHEUS_NAMESPACE) $(PROMETHEUS_VERSION) $(KUSTOMIZE) # The metrics.out file contains raw json data of the metrics collected during a test run. @@ -269,7 +272,7 @@ prometheus: #HELP Deploy Prometheus into specified namespace # prometheus. Prometheus will gather metrics we currently query for over the test run, # and provide alerts from the metrics based on the rules that we set. .PHONY: e2e-metrics -e2e-metrics: #HELP Request metrics from prometheus; place in ARTIFACT_PATH if set +e2e-metrics: #EXHELP Request metrics from prometheus; place in ARTIFACT_PATH if set curl -X POST \ -H "Content-Type: application/x-www-form-urlencoded" \ --data 'query={pod=~"operator-controller-controller-manager-.*|catalogd-controller-manager-.*"}' \ @@ -384,6 +387,10 @@ go-build-linux: $(BINARIES) .PHONY: run run: docker-build kind-cluster kind-load kind-deploy wait #HELP Build the operator-controller then deploy it into a new kind cluster. +.PHONY: run-experimental +run-experimental: SOURCE_MANIFEST := $(EXPERIMENTAL_MANIFEST) +run-experimental: run #HELP Build the operator-controller then deploy it with the experimental manifest into a new kind cluster. + CATD_NAMESPACE := olmv1-system wait: kubectl wait --for=condition=Available --namespace=$(CATD_NAMESPACE) deployment/catalogd-controller-manager --timeout=60s diff --git a/config/base/catalogd/kustomization.yaml b/config/base/catalogd/kustomization.yaml index 9a6bc2512..b30ee2540 100644 --- a/config/base/catalogd/kustomization.yaml +++ b/config/base/catalogd/kustomization.yaml @@ -1,8 +1,8 @@ +# Does not include the CRD, which must be added separately (it's non-namespaced) apiVersion: kustomize.config.k8s.io/v1beta1 kind: Kustomization namespace: olmv1-system namePrefix: catalogd- resources: -- crd - rbac - manager diff --git a/config/base/operator-controller/kustomization.yaml b/config/base/operator-controller/kustomization.yaml index 1d63fb17f..e10e2bbaa 100644 --- a/config/base/operator-controller/kustomization.yaml +++ b/config/base/operator-controller/kustomization.yaml @@ -1,9 +1,8 @@ +# Does not include the CRD, which must be added separately (it's non-namespaced) apiVersion: kustomize.config.k8s.io/v1beta1 kind: Kustomization namespace: olmv1-system namePrefix: operator-controller- resources: -- crd - rbac - manager - diff --git a/config/components/base/common/kustomization.yaml b/config/components/base/common/kustomization.yaml new file mode 100644 index 000000000..984510f2e --- /dev/null +++ b/config/components/base/common/kustomization.yaml @@ -0,0 +1,10 @@ +apiVersion: kustomize.config.k8s.io/v1alpha1 +kind: Component +# resources contains the minimal required base, EXCEPT CRDs +resources: +- ../../../base/catalogd +- ../../../base/operator-controller +- ../../../base/common +# components should include any GA'd features (none as of now) +components: + diff --git a/config/components/base/experimental/kustomization.yaml b/config/components/base/experimental/kustomization.yaml new file mode 100644 index 000000000..d7b29fbfb --- /dev/null +++ b/config/components/base/experimental/kustomization.yaml @@ -0,0 +1,13 @@ +apiVersion: kustomize.config.k8s.io/v1alpha1 +kind: Component +# Pull in the experimental CRDs +resources: +- ../../../base/catalogd/crd/experimental +- ../../../base/operator-controller/crd/experimental +# Pull in the component(s) common to standard and experimental +components: +- ../common +# EXPERIMENTAL FEATURES ARE LISTED HERE +- ../../features/synthetic-user-permissions +- ../../features/webhook-provider-certmanager +- ../../features/webhook-provider-openshift-serviceca diff --git a/config/components/base/standard/kustomization.yaml b/config/components/base/standard/kustomization.yaml new file mode 100644 index 000000000..309a62ee8 --- /dev/null +++ b/config/components/base/standard/kustomization.yaml @@ -0,0 +1,10 @@ +apiVersion: kustomize.config.k8s.io/v1alpha1 +kind: Component +# Pull in the standard CRDs +resources: +- ../../../base/catalogd/crd/standard +- ../../../base/operator-controller/crd/standard +# Pull in the component(s) common to standard and experimental +components: +- ../common +# GA'D FEATURES ARE LISTED HERE diff --git a/config/overlays/basic-olm/kustomization.yaml b/config/overlays/basic-olm/kustomization.yaml index 5975b3c04..07f4fb321 100644 --- a/config/overlays/basic-olm/kustomization.yaml +++ b/config/overlays/basic-olm/kustomization.yaml @@ -2,7 +2,5 @@ # DO NOT ADD A NAMESPACE HERE apiVersion: kustomize.config.k8s.io/v1beta1 kind: Kustomization -resources: -- ../../base/catalogd -- ../../base/operator-controller -- ../../base/common +components: +- ../../components/base/standard diff --git a/config/overlays/experimental/kustomization.yaml b/config/overlays/experimental/kustomization.yaml new file mode 100644 index 000000000..a51d3b8ea --- /dev/null +++ b/config/overlays/experimental/kustomization.yaml @@ -0,0 +1,8 @@ +# kustomization file for secure OLMv1 +# DO NOT ADD A NAMESPACE HERE +apiVersion: kustomize.config.k8s.io/v1beta1 +kind: Kustomization +components: +- ../../components/base/experimental +# This must be last due to namespace overwrite issues of the ca +- ../../components/cert-manager diff --git a/config/overlays/standard-e2e/kustomization.yaml b/config/overlays/standard-e2e/kustomization.yaml index 8b4a152f7..7de95223e 100644 --- a/config/overlays/standard-e2e/kustomization.yaml +++ b/config/overlays/standard-e2e/kustomization.yaml @@ -2,11 +2,8 @@ # DO NOT ADD A NAMESPACE HERE apiVersion: kustomize.config.k8s.io/v1beta1 kind: Kustomization -resources: -- ../../base/catalogd -- ../../base/operator-controller -- ../../base/common components: +- ../../components/base/standard - ../../components/e2e # This must be last due to namespace overwrite issues of the ca - ../../components/cert-manager diff --git a/config/overlays/standard/kustomization.yaml b/config/overlays/standard/kustomization.yaml index 8becbcac4..51d4bcaf6 100644 --- a/config/overlays/standard/kustomization.yaml +++ b/config/overlays/standard/kustomization.yaml @@ -2,10 +2,7 @@ # DO NOT ADD A NAMESPACE HERE apiVersion: kustomize.config.k8s.io/v1beta1 kind: Kustomization -resources: -- ../../base/catalogd -- ../../base/operator-controller -- ../../base/common components: +- ../../components/base/standard # This must be last due to namespace overwrite issues of the ca - ../../components/cert-manager diff --git a/manifests/experimental.yaml b/manifests/experimental.yaml new file mode 100644 index 000000000..2e6a9fd19 --- /dev/null +++ b/manifests/experimental.yaml @@ -0,0 +1,1906 @@ +apiVersion: v1 +kind: Namespace +metadata: + labels: + app.kubernetes.io/part-of: olm + pod-security.kubernetes.io/enforce: restricted + pod-security.kubernetes.io/enforce-version: latest + name: olmv1-system +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + annotations: + controller-gen.kubebuilder.io/version: v0.18.0 + olm.operatorframework.io/feature-set: experimental + name: clustercatalogs.olm.operatorframework.io +spec: + group: olm.operatorframework.io + names: + kind: ClusterCatalog + listKind: ClusterCatalogList + plural: clustercatalogs + singular: clustercatalog + scope: Cluster + versions: + - additionalPrinterColumns: + - jsonPath: .status.lastUnpacked + name: LastUnpacked + type: date + - jsonPath: .status.conditions[?(@.type=="Serving")].status + name: Serving + type: string + - jsonPath: .metadata.creationTimestamp + name: Age + type: date + name: v1 + schema: + openAPIV3Schema: + description: |- + ClusterCatalog enables users to make File-Based Catalog (FBC) catalog data available to the cluster. + For more information on FBC, see https://olm.operatorframework.io/docs/reference/file-based-catalogs/#docs + properties: + apiVersion: + description: |- + APIVersion defines the versioned schema of this representation of an object. + Servers should convert recognized schemas to the latest internal value, and + may reject unrecognized values. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources + type: string + kind: + description: |- + Kind is a string value representing the REST resource this object represents. + Servers may infer this from the endpoint the client submits requests to. + Cannot be updated. + In CamelCase. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds + type: string + metadata: + type: object + spec: + description: |- + spec is the desired state of the ClusterCatalog. + spec is required. + The controller will work to ensure that the desired + catalog is unpacked and served over the catalog content HTTP server. + properties: + availabilityMode: + default: Available + description: |- + availabilityMode allows users to define how the ClusterCatalog is made available to clients on the cluster. + availabilityMode is optional. + + Allowed values are "Available" and "Unavailable" and omitted. + + When omitted, the default value is "Available". + + When set to "Available", the catalog contents will be unpacked and served over the catalog content HTTP server. + Setting the availabilityMode to "Available" tells clients that they should consider this ClusterCatalog + and its contents as usable. + + When set to "Unavailable", the catalog contents will no longer be served over the catalog content HTTP server. + When set to this availabilityMode it should be interpreted the same as the ClusterCatalog not existing. + Setting the availabilityMode to "Unavailable" can be useful in scenarios where a user may not want + to delete the ClusterCatalog all together, but would still like it to be treated as if it doesn't exist. + enum: + - Unavailable + - Available + type: string + priority: + default: 0 + description: |- + priority allows the user to define a priority for a ClusterCatalog. + priority is optional. + + A ClusterCatalog's priority is used by clients as a tie-breaker between ClusterCatalogs that meet the client's requirements. + A higher number means higher priority. + + It is up to clients to decide how to handle scenarios where multiple ClusterCatalogs with the same priority meet their requirements. + When deciding how to break the tie in this scenario, it is recommended that clients prompt their users for additional input. + + When omitted, the default priority is 0 because that is the zero value of integers. + + Negative numbers can be used to specify a priority lower than the default. + Positive numbers can be used to specify a priority higher than the default. + + The lowest possible value is -2147483648. + The highest possible value is 2147483647. + format: int32 + type: integer + source: + description: |- + source allows a user to define the source of a catalog. + A "catalog" contains information on content that can be installed on a cluster. + Providing a catalog source makes the contents of the catalog discoverable and usable by + other on-cluster components. + These on-cluster components may do a variety of things with this information, such as + presenting the content in a GUI dashboard or installing content from the catalog on the cluster. + The catalog source must contain catalog metadata in the File-Based Catalog (FBC) format. + For more information on FBC, see https://olm.operatorframework.io/docs/reference/file-based-catalogs/#docs. + source is a required field. + + Below is a minimal example of a ClusterCatalogSpec that sources a catalog from an image: + + source: + type: Image + image: + ref: quay.io/operatorhubio/catalog:latest + properties: + image: + description: |- + image is used to configure how catalog contents are sourced from an OCI image. + This field is required when type is Image, and forbidden otherwise. + properties: + pollIntervalMinutes: + description: |- + pollIntervalMinutes allows the user to set the interval, in minutes, at which the image source should be polled for new content. + pollIntervalMinutes is optional. + pollIntervalMinutes can not be specified when ref is a digest-based reference. + + When omitted, the image will not be polled for new content. + minimum: 1 + type: integer + ref: + description: |- + ref allows users to define the reference to a container image containing Catalog contents. + ref is required. + ref can not be more than 1000 characters. + + A reference can be broken down into 3 parts - the domain, name, and identifier. + + The domain is typically the registry where an image is located. + It must be alphanumeric characters (lowercase and uppercase) separated by the "." character. + Hyphenation is allowed, but the domain must start and end with alphanumeric characters. + Specifying a port to use is also allowed by adding the ":" character followed by numeric values. + The port must be the last value in the domain. + Some examples of valid domain values are "registry.mydomain.io", "quay.io", "my-registry.io:8080". + + The name is typically the repository in the registry where an image is located. + It must contain lowercase alphanumeric characters separated only by the ".", "_", "__", "-" characters. + Multiple names can be concatenated with the "/" character. + The domain and name are combined using the "/" character. + Some examples of valid name values are "operatorhubio/catalog", "catalog", "my-catalog.prod". + An example of the domain and name parts of a reference being combined is "quay.io/operatorhubio/catalog". + + The identifier is typically the tag or digest for an image reference and is present at the end of the reference. + It starts with a separator character used to distinguish the end of the name and beginning of the identifier. + For a digest-based reference, the "@" character is the separator. + For a tag-based reference, the ":" character is the separator. + An identifier is required in the reference. + + Digest-based references must contain an algorithm reference immediately after the "@" separator. + The algorithm reference must be followed by the ":" character and an encoded string. + The algorithm must start with an uppercase or lowercase alpha character followed by alphanumeric characters and may contain the "-", "_", "+", and "." characters. + Some examples of valid algorithm values are "sha256", "sha256+b64u", "multihash+base58". + The encoded string following the algorithm must be hex digits (a-f, A-F, 0-9) and must be a minimum of 32 characters. + + Tag-based references must begin with a word character (alphanumeric + "_") followed by word characters or ".", and "-" characters. + The tag must not be longer than 127 characters. + + An example of a valid digest-based image reference is "quay.io/operatorhubio/catalog@sha256:200d4ddb2a73594b91358fe6397424e975205bfbe44614f5846033cad64b3f05" + An example of a valid tag-based image reference is "quay.io/operatorhubio/catalog:latest" + maxLength: 1000 + type: string + x-kubernetes-validations: + - message: must start with a valid domain. valid domains must + be alphanumeric characters (lowercase and uppercase) separated + by the "." character. + rule: self.matches('^([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9-]*[a-zA-Z0-9])((\\.([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9-]*[a-zA-Z0-9]))+)?(:[0-9]+)?\\b') + - message: a valid name is required. valid names must contain + lowercase alphanumeric characters separated only by the + ".", "_", "__", "-" characters. + rule: self.find('(\\/[a-z0-9]+((([._]|__|[-]*)[a-z0-9]+)+)?((\\/[a-z0-9]+((([._]|__|[-]*)[a-z0-9]+)+)?)+)?)') + != "" + - message: must end with a digest or a tag + rule: self.find('(@.*:)') != "" || self.find(':.*$') != + "" + - message: tag is invalid. the tag must not be more than 127 + characters + rule: 'self.find(''(@.*:)'') == "" ? (self.find('':.*$'') + != "" ? self.find('':.*$'').substring(1).size() <= 127 + : true) : true' + - message: tag is invalid. valid tags must begin with a word + character (alphanumeric + "_") followed by word characters + or ".", and "-" characters + rule: 'self.find(''(@.*:)'') == "" ? (self.find('':.*$'') + != "" ? self.find('':.*$'').matches('':[\\w][\\w.-]*$'') + : true) : true' + - message: digest algorithm is not valid. valid algorithms + must start with an uppercase or lowercase alpha character + followed by alphanumeric characters and may contain the + "-", "_", "+", and "." characters. + rule: 'self.find(''(@.*:)'') != "" ? self.find(''(@.*:)'').matches(''(@[A-Za-z][A-Za-z0-9]*([-_+.][A-Za-z][A-Za-z0-9]*)*[:])'') + : true' + - message: digest is not valid. the encoded string must be + at least 32 characters + rule: 'self.find(''(@.*:)'') != "" ? self.find('':.*$'').substring(1).size() + >= 32 : true' + - message: digest is not valid. the encoded string must only + contain hex characters (A-F, a-f, 0-9) + rule: 'self.find(''(@.*:)'') != "" ? self.find('':.*$'').matches('':[0-9A-Fa-f]*$'') + : true' + required: + - ref + type: object + x-kubernetes-validations: + - message: cannot specify pollIntervalMinutes while using digest-based + image + rule: 'self.ref.find(''(@.*:)'') != "" ? !has(self.pollIntervalMinutes) + : true' + type: + description: |- + type is a reference to the type of source the catalog is sourced from. + type is required. + + The only allowed value is "Image". + + When set to "Image", the ClusterCatalog content will be sourced from an OCI image. + When using an image source, the image field must be set and must be the only field defined for this type. + enum: + - Image + type: string + required: + - type + type: object + x-kubernetes-validations: + - message: image is required when source type is Image, and forbidden + otherwise + rule: 'has(self.type) && self.type == ''Image'' ? has(self.image) + : !has(self.image)' + required: + - source + type: object + status: + description: |- + status contains information about the state of the ClusterCatalog such as: + - Whether or not the catalog contents are being served via the catalog content HTTP server + - Whether or not the ClusterCatalog is progressing to a new state + - A reference to the source from which the catalog contents were retrieved + properties: + conditions: + description: |- + conditions is a representation of the current state for this ClusterCatalog. + + The current condition types are Serving and Progressing. + + The Serving condition is used to represent whether or not the contents of the catalog is being served via the HTTP(S) web server. + When it has a status of True and a reason of Available, the contents of the catalog are being served. + When it has a status of False and a reason of Unavailable, the contents of the catalog are not being served because the contents are not yet available. + When it has a status of False and a reason of UserSpecifiedUnavailable, the contents of the catalog are not being served because the catalog has been intentionally marked as unavailable. + + The Progressing condition is used to represent whether or not the ClusterCatalog is progressing or is ready to progress towards a new state. + When it has a status of True and a reason of Retrying, there was an error in the progression of the ClusterCatalog that may be resolved on subsequent reconciliation attempts. + When it has a status of True and a reason of Succeeded, the ClusterCatalog has successfully progressed to a new state and is ready to continue progressing. + When it has a status of False and a reason of Blocked, there was an error in the progression of the ClusterCatalog that requires manual intervention for recovery. + + In the case that the Serving condition is True with reason Available and Progressing is True with reason Retrying, the previously fetched + catalog contents are still being served via the HTTP(S) web server while we are progressing towards serving a new version of the catalog + contents. This could occur when we've initially fetched the latest contents from the source for this catalog and when polling for changes + to the contents we identify that there are updates to the contents. + items: + description: Condition contains details for one aspect of the current + state of this API Resource. + properties: + lastTransitionTime: + description: |- + lastTransitionTime is the last time the condition transitioned from one status to another. + This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. + format: date-time + type: string + message: + description: |- + message is a human readable message indicating details about the transition. + This may be an empty string. + maxLength: 32768 + type: string + observedGeneration: + description: |- + observedGeneration represents the .metadata.generation that the condition was set based upon. + For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date + with respect to the current state of the instance. + format: int64 + minimum: 0 + type: integer + reason: + description: |- + reason contains a programmatic identifier indicating the reason for the condition's last transition. + Producers of specific condition types may define expected values and meanings for this field, + and whether the values are considered a guaranteed API. + The value should be a CamelCase string. + This field may not be empty. + maxLength: 1024 + minLength: 1 + pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ + type: string + status: + description: status of the condition, one of True, False, Unknown. + enum: + - "True" + - "False" + - Unknown + type: string + type: + description: type of condition in CamelCase or in foo.example.com/CamelCase. + maxLength: 316 + pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ + type: string + required: + - lastTransitionTime + - message + - reason + - status + - type + type: object + type: array + x-kubernetes-list-map-keys: + - type + x-kubernetes-list-type: map + lastUnpacked: + description: |- + lastUnpacked represents the last time the contents of the + catalog were extracted from their source format. As an example, + when using an Image source, the OCI image will be pulled and the + image layers written to a file-system backed cache. We refer to the + act of this extraction from the source format as "unpacking". + format: date-time + type: string + resolvedSource: + description: resolvedSource contains information about the resolved + source based on the source type. + properties: + image: + description: |- + image is a field containing resolution information for a catalog sourced from an image. + This field must be set when type is Image, and forbidden otherwise. + properties: + ref: + description: |- + ref contains the resolved image digest-based reference. + The digest format is used so users can use other tooling to fetch the exact + OCI manifests that were used to extract the catalog contents. + maxLength: 1000 + type: string + x-kubernetes-validations: + - message: must start with a valid domain. valid domains must + be alphanumeric characters (lowercase and uppercase) separated + by the "." character. + rule: self.matches('^([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9-]*[a-zA-Z0-9])((\\.([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9-]*[a-zA-Z0-9]))+)?(:[0-9]+)?\\b') + - message: a valid name is required. valid names must contain + lowercase alphanumeric characters separated only by the + ".", "_", "__", "-" characters. + rule: self.find('(\\/[a-z0-9]+((([._]|__|[-]*)[a-z0-9]+)+)?((\\/[a-z0-9]+((([._]|__|[-]*)[a-z0-9]+)+)?)+)?)') + != "" + - message: must end with a digest + rule: self.find('(@.*:)') != "" + - message: digest algorithm is not valid. valid algorithms + must start with an uppercase or lowercase alpha character + followed by alphanumeric characters and may contain the + "-", "_", "+", and "." characters. + rule: 'self.find(''(@.*:)'') != "" ? self.find(''(@.*:)'').matches(''(@[A-Za-z][A-Za-z0-9]*([-_+.][A-Za-z][A-Za-z0-9]*)*[:])'') + : true' + - message: digest is not valid. the encoded string must be + at least 32 characters + rule: 'self.find(''(@.*:)'') != "" ? self.find('':.*$'').substring(1).size() + >= 32 : true' + - message: digest is not valid. the encoded string must only + contain hex characters (A-F, a-f, 0-9) + rule: 'self.find(''(@.*:)'') != "" ? self.find('':.*$'').matches('':[0-9A-Fa-f]*$'') + : true' + required: + - ref + type: object + type: + description: |- + type is a reference to the type of source the catalog is sourced from. + type is required. + + The only allowed value is "Image". + + When set to "Image", information about the resolved image source will be set in the 'image' field. + enum: + - Image + type: string + required: + - image + - type + type: object + x-kubernetes-validations: + - message: image is required when source type is Image, and forbidden + otherwise + rule: 'has(self.type) && self.type == ''Image'' ? has(self.image) + : !has(self.image)' + urls: + description: urls contains the URLs that can be used to access the + catalog. + properties: + base: + description: |- + base is a cluster-internal URL that provides endpoints for + accessing the content of the catalog. + + It is expected that clients append the path for the endpoint they wish + to access. + + Currently, only a single endpoint is served and is accessible at the path + /api/v1. + + The endpoints served for the v1 API are: + - /all - this endpoint returns the entirety of the catalog contents in the FBC format + + As the needs of users and clients of the evolve, new endpoints may be added. + maxLength: 525 + type: string + x-kubernetes-validations: + - message: must be a valid URL + rule: isURL(self) + - message: scheme must be either http or https + rule: 'isURL(self) ? (url(self).getScheme() == "http" || url(self).getScheme() + == "https") : true' + required: + - base + type: object + type: object + required: + - metadata + - spec + type: object + served: true + storage: true + subresources: + status: {} +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + annotations: + controller-gen.kubebuilder.io/version: v0.18.0 + olm.operatorframework.io/feature-set: experimental + name: clusterextensions.olm.operatorframework.io +spec: + group: olm.operatorframework.io + names: + kind: ClusterExtension + listKind: ClusterExtensionList + plural: clusterextensions + singular: clusterextension + scope: Cluster + versions: + - additionalPrinterColumns: + - jsonPath: .status.install.bundle.name + name: Installed Bundle + type: string + - jsonPath: .status.install.bundle.version + name: Version + type: string + - jsonPath: .status.conditions[?(@.type=='Installed')].status + name: Installed + type: string + - jsonPath: .status.conditions[?(@.type=='Progressing')].status + name: Progressing + type: string + - jsonPath: .metadata.creationTimestamp + name: Age + type: date + name: v1 + schema: + openAPIV3Schema: + description: ClusterExtension is the Schema for the clusterextensions API + properties: + apiVersion: + description: |- + APIVersion defines the versioned schema of this representation of an object. + Servers should convert recognized schemas to the latest internal value, and + may reject unrecognized values. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources + type: string + kind: + description: |- + Kind is a string value representing the REST resource this object represents. + Servers may infer this from the endpoint the client submits requests to. + Cannot be updated. + In CamelCase. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds + type: string + metadata: + type: object + spec: + description: spec is an optional field that defines the desired state + of the ClusterExtension. + properties: + install: + description: |- + install is an optional field used to configure the installation options + for the ClusterExtension such as the pre-flight check configuration. + properties: + preflight: + description: |- + preflight is an optional field that can be used to configure the checks that are + run before installation or upgrade of the content for the package specified in the packageName field. + + When specified, it replaces the default preflight configuration for install/upgrade actions. + When not specified, the default configuration will be used. + properties: + crdUpgradeSafety: + description: |- + crdUpgradeSafety is used to configure the CRD Upgrade Safety pre-flight + checks that run prior to upgrades of installed content. + + The CRD Upgrade Safety pre-flight check safeguards from unintended + consequences of upgrading a CRD, such as data loss. + properties: + enforcement: + description: |- + enforcement is a required field, used to configure the state of the CRD Upgrade Safety pre-flight check. + + Allowed values are "None" or "Strict". The default value is "Strict". + + When set to "None", the CRD Upgrade Safety pre-flight check will be skipped + when performing an upgrade operation. This should be used with caution as + unintended consequences such as data loss can occur. + + When set to "Strict", the CRD Upgrade Safety pre-flight check will be run when + performing an upgrade operation. + enum: + - None + - Strict + type: string + required: + - enforcement + type: object + required: + - crdUpgradeSafety + type: object + x-kubernetes-validations: + - message: at least one of [crdUpgradeSafety] are required when + preflight is specified + rule: has(self.crdUpgradeSafety) + type: object + x-kubernetes-validations: + - message: at least one of [preflight] are required when install is + specified + rule: has(self.preflight) + namespace: + description: |- + namespace is a reference to a Kubernetes namespace. + This is the namespace in which the provided ServiceAccount must exist. + It also designates the default namespace where namespace-scoped resources + for the extension are applied to the cluster. + Some extensions may contain namespace-scoped resources to be applied in other namespaces. + This namespace must exist. + + namespace is required, immutable, and follows the DNS label standard + as defined in [RFC 1123]. It must contain only lowercase alphanumeric characters or hyphens (-), + start and end with an alphanumeric character, and be no longer than 63 characters + + [RFC 1123]: https://tools.ietf.org/html/rfc1123 + maxLength: 63 + type: string + x-kubernetes-validations: + - message: namespace is immutable + rule: self == oldSelf + - message: namespace must be a valid DNS1123 label + rule: self.matches("^[a-z0-9]([-a-z0-9]*[a-z0-9])?$") + serviceAccount: + description: |- + serviceAccount is a reference to a ServiceAccount used to perform all interactions + with the cluster that are required to manage the extension. + The ServiceAccount must be configured with the necessary permissions to perform these interactions. + The ServiceAccount must exist in the namespace referenced in the spec. + serviceAccount is required. + properties: + name: + description: |- + name is a required, immutable reference to the name of the ServiceAccount + to be used for installation and management of the content for the package + specified in the packageName field. + + This ServiceAccount must exist in the installNamespace. + + name follows the DNS subdomain standard as defined in [RFC 1123]. + It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric character, + and be no longer than 253 characters. + + Some examples of valid values are: + - some-serviceaccount + - 123-serviceaccount + - 1-serviceaccount-2 + - someserviceaccount + - some.serviceaccount + + Some examples of invalid values are: + - -some-serviceaccount + - some-serviceaccount- + + [RFC 1123]: https://tools.ietf.org/html/rfc1123 + maxLength: 253 + type: string + x-kubernetes-validations: + - message: name is immutable + rule: self == oldSelf + - message: name must be a valid DNS1123 subdomain. It must contain + only lowercase alphanumeric characters, hyphens (-) or periods + (.), start and end with an alphanumeric character, and be + no longer than 253 characters + rule: self.matches("^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$") + required: + - name + type: object + source: + description: |- + source is a required field which selects the installation source of content + for this ClusterExtension. Selection is performed by setting the sourceType. + + Catalog is currently the only implemented sourceType, and setting the + sourcetype to "Catalog" requires the catalog field to also be defined. + + Below is a minimal example of a source definition (in yaml): + + source: + sourceType: Catalog + catalog: + packageName: example-package + properties: + catalog: + description: |- + catalog is used to configure how information is sourced from a catalog. + This field is required when sourceType is "Catalog", and forbidden otherwise. + properties: + channels: + description: |- + channels is an optional reference to a set of channels belonging to + the package specified in the packageName field. + + A "channel" is a package-author-defined stream of updates for an extension. + + Each channel in the list must follow the DNS subdomain standard + as defined in [RFC 1123]. It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric character, + and be no longer than 253 characters. No more than 256 channels can be specified. + + When specified, it is used to constrain the set of installable bundles and + the automated upgrade path. This constraint is an AND operation with the + version field. For example: + - Given channel is set to "foo" + - Given version is set to ">=1.0.0, <1.5.0" + - Only bundles that exist in channel "foo" AND satisfy the version range comparison will be considered installable + - Automatic upgrades will be constrained to upgrade edges defined by the selected channel + + When unspecified, upgrade edges across all channels will be used to identify valid automatic upgrade paths. + + Some examples of valid values are: + - 1.1.x + - alpha + - stable + - stable-v1 + - v1-stable + - dev-preview + - preview + - community + + Some examples of invalid values are: + - -some-channel + - some-channel- + - thisisareallylongchannelnamethatisgreaterthanthemaximumlength + - original_40 + - --default-channel + + [RFC 1123]: https://tools.ietf.org/html/rfc1123 + items: + maxLength: 253 + type: string + x-kubernetes-validations: + - message: channels entries must be valid DNS1123 subdomains + rule: self.matches("^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$") + maxItems: 256 + type: array + packageName: + description: |- + packageName is a reference to the name of the package to be installed + and is used to filter the content from catalogs. + + packageName is required, immutable, and follows the DNS subdomain standard + as defined in [RFC 1123]. It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric character, + and be no longer than 253 characters. + + Some examples of valid values are: + - some-package + - 123-package + - 1-package-2 + - somepackage + + Some examples of invalid values are: + - -some-package + - some-package- + - thisisareallylongpackagenamethatisgreaterthanthemaximumlength + - some.package + + [RFC 1123]: https://tools.ietf.org/html/rfc1123 + maxLength: 253 + type: string + x-kubernetes-validations: + - message: packageName is immutable + rule: self == oldSelf + - message: packageName must be a valid DNS1123 subdomain. + It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric + character, and be no longer than 253 characters + rule: self.matches("^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$") + selector: + description: |- + selector is an optional field that can be used + to filter the set of ClusterCatalogs used in the bundle + selection process. + + When unspecified, all ClusterCatalogs will be used in + the bundle selection process. + properties: + matchExpressions: + description: matchExpressions is a list of label selector + requirements. The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that the selector + applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + x-kubernetes-list-type: atomic + required: + - key + - operator + type: object + type: array + x-kubernetes-list-type: atomic + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + upgradeConstraintPolicy: + default: CatalogProvided + description: |- + upgradeConstraintPolicy is an optional field that controls whether + the upgrade path(s) defined in the catalog are enforced for the package + referenced in the packageName field. + + Allowed values are: "CatalogProvided" or "SelfCertified", or omitted. + + When this field is set to "CatalogProvided", automatic upgrades will only occur + when upgrade constraints specified by the package author are met. + + When this field is set to "SelfCertified", the upgrade constraints specified by + the package author are ignored. This allows for upgrades and downgrades to + any version of the package. This is considered a dangerous operation as it + can lead to unknown and potentially disastrous outcomes, such as data + loss. It is assumed that users have independently verified changes when + using this option. + + When this field is omitted, the default value is "CatalogProvided". + enum: + - CatalogProvided + - SelfCertified + type: string + version: + description: |- + version is an optional semver constraint (a specific version or range of versions). When unspecified, the latest version available will be installed. + + Acceptable version ranges are no longer than 64 characters. + Version ranges are composed of comma- or space-delimited values and one or + more comparison operators, known as comparison strings. Additional + comparison strings can be added using the OR operator (||). + + # Range Comparisons + + To specify a version range, you can use a comparison string like ">=3.0, + <3.6". When specifying a range, automatic updates will occur within that + range. The example comparison string means "install any version greater than + or equal to 3.0.0 but less than 3.6.0.". It also states intent that if any + upgrades are available within the version range after initial installation, + those upgrades should be automatically performed. + + # Pinned Versions + + To specify an exact version to install you can use a version range that + "pins" to a specific version. When pinning to a specific version, no + automatic updates will occur. An example of a pinned version range is + "0.6.0", which means "only install version 0.6.0 and never + upgrade from this version". + + # Basic Comparison Operators + + The basic comparison operators and their meanings are: + - "=", equal (not aliased to an operator) + - "!=", not equal + - "<", less than + - ">", greater than + - ">=", greater than OR equal to + - "<=", less than OR equal to + + # Wildcard Comparisons + + You can use the "x", "X", and "*" characters as wildcard characters in all + comparison operations. Some examples of using the wildcard characters: + - "1.2.x", "1.2.X", and "1.2.*" is equivalent to ">=1.2.0, < 1.3.0" + - ">= 1.2.x", ">= 1.2.X", and ">= 1.2.*" is equivalent to ">= 1.2.0" + - "<= 2.x", "<= 2.X", and "<= 2.*" is equivalent to "< 3" + - "x", "X", and "*" is equivalent to ">= 0.0.0" + + # Patch Release Comparisons + + When you want to specify a minor version up to the next major version you + can use the "~" character to perform patch comparisons. Some examples: + - "~1.2.3" is equivalent to ">=1.2.3, <1.3.0" + - "~1" and "~1.x" is equivalent to ">=1, <2" + - "~2.3" is equivalent to ">=2.3, <2.4" + - "~1.2.x" is equivalent to ">=1.2.0, <1.3.0" + + # Major Release Comparisons + + You can use the "^" character to make major release comparisons after a + stable 1.0.0 version is published. If there is no stable version published, // minor versions define the stability level. Some examples: + - "^1.2.3" is equivalent to ">=1.2.3, <2.0.0" + - "^1.2.x" is equivalent to ">=1.2.0, <2.0.0" + - "^2.3" is equivalent to ">=2.3, <3" + - "^2.x" is equivalent to ">=2.0.0, <3" + - "^0.2.3" is equivalent to ">=0.2.3, <0.3.0" + - "^0.2" is equivalent to ">=0.2.0, <0.3.0" + - "^0.0.3" is equvalent to ">=0.0.3, <0.0.4" + - "^0.0" is equivalent to ">=0.0.0, <0.1.0" + - "^0" is equivalent to ">=0.0.0, <1.0.0" + + # OR Comparisons + You can use the "||" character to represent an OR operation in the version + range. Some examples: + - ">=1.2.3, <2.0.0 || >3.0.0" + - "^0 || ^3 || ^5" + + For more information on semver, please see https://semver.org/ + maxLength: 64 + type: string + x-kubernetes-validations: + - message: invalid version expression + rule: self.matches("^(\\s*(=||!=|>|<|>=|=>|<=|=<|~|~>|\\^)\\s*(v?(0|[1-9]\\d*|[x|X|\\*])(\\.(0|[1-9]\\d*|x|X|\\*]))?(\\.(0|[1-9]\\d*|x|X|\\*))?(-([0-9A-Za-z\\-]+(\\.[0-9A-Za-z\\-]+)*))?(\\+([0-9A-Za-z\\-]+(\\.[0-9A-Za-z\\-]+)*))?)\\s*)((?:\\s+|,\\s*|\\s*\\|\\|\\s*)(=||!=|>|<|>=|=>|<=|=<|~|~>|\\^)\\s*(v?(0|[1-9]\\d*|x|X|\\*])(\\.(0|[1-9]\\d*|x|X|\\*))?(\\.(0|[1-9]\\d*|x|X|\\*]))?(-([0-9A-Za-z\\-]+(\\.[0-9A-Za-z\\-]+)*))?(\\+([0-9A-Za-z\\-]+(\\.[0-9A-Za-z\\-]+)*))?)\\s*)*$") + required: + - packageName + type: object + sourceType: + description: |- + sourceType is a required reference to the type of install source. + + Allowed values are "Catalog" + + When this field is set to "Catalog", information for determining the + appropriate bundle of content to install will be fetched from + ClusterCatalog resources existing on the cluster. + When using the Catalog sourceType, the catalog field must also be set. + enum: + - Catalog + type: string + required: + - sourceType + type: object + x-kubernetes-validations: + - message: catalog is required when sourceType is Catalog, and forbidden + otherwise + rule: 'has(self.sourceType) && self.sourceType == ''Catalog'' ? + has(self.catalog) : !has(self.catalog)' + required: + - namespace + - serviceAccount + - source + type: object + status: + description: status is an optional field that defines the observed state + of the ClusterExtension. + properties: + conditions: + description: |- + The set of condition types which apply to all spec.source variations are Installed and Progressing. + + The Installed condition represents whether or not the bundle has been installed for this ClusterExtension. + When Installed is True and the Reason is Succeeded, the bundle has been successfully installed. + When Installed is False and the Reason is Failed, the bundle has failed to install. + + The Progressing condition represents whether or not the ClusterExtension is advancing towards a new state. + When Progressing is True and the Reason is Succeeded, the ClusterExtension is making progress towards a new state. + When Progressing is True and the Reason is Retrying, the ClusterExtension has encountered an error that could be resolved on subsequent reconciliation attempts. + When Progressing is False and the Reason is Blocked, the ClusterExtension has encountered an error that requires manual intervention for recovery. + + When the ClusterExtension is sourced from a catalog, if may also communicate a deprecation condition. + These are indications from a package owner to guide users away from a particular package, channel, or bundle. + BundleDeprecated is set if the requested bundle version is marked deprecated in the catalog. + ChannelDeprecated is set if the requested channel is marked deprecated in the catalog. + PackageDeprecated is set if the requested package is marked deprecated in the catalog. + Deprecated is a rollup condition that is present when any of the deprecated conditions are present. + items: + description: Condition contains details for one aspect of the current + state of this API Resource. + properties: + lastTransitionTime: + description: |- + lastTransitionTime is the last time the condition transitioned from one status to another. + This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. + format: date-time + type: string + message: + description: |- + message is a human readable message indicating details about the transition. + This may be an empty string. + maxLength: 32768 + type: string + observedGeneration: + description: |- + observedGeneration represents the .metadata.generation that the condition was set based upon. + For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date + with respect to the current state of the instance. + format: int64 + minimum: 0 + type: integer + reason: + description: |- + reason contains a programmatic identifier indicating the reason for the condition's last transition. + Producers of specific condition types may define expected values and meanings for this field, + and whether the values are considered a guaranteed API. + The value should be a CamelCase string. + This field may not be empty. + maxLength: 1024 + minLength: 1 + pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ + type: string + status: + description: status of the condition, one of True, False, Unknown. + enum: + - "True" + - "False" + - Unknown + type: string + type: + description: type of condition in CamelCase or in foo.example.com/CamelCase. + maxLength: 316 + pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ + type: string + required: + - lastTransitionTime + - message + - reason + - status + - type + type: object + type: array + x-kubernetes-list-map-keys: + - type + x-kubernetes-list-type: map + install: + description: install is a representation of the current installation + status for this ClusterExtension. + properties: + bundle: + description: |- + bundle is a required field which represents the identifying attributes of a bundle. + + A "bundle" is a versioned set of content that represents the resources that + need to be applied to a cluster to install a package. + properties: + name: + description: |- + name is required and follows the DNS subdomain standard + as defined in [RFC 1123]. It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric character, + and be no longer than 253 characters. + type: string + x-kubernetes-validations: + - message: packageName must be a valid DNS1123 subdomain. + It must contain only lowercase alphanumeric characters, + hyphens (-) or periods (.), start and end with an alphanumeric + character, and be no longer than 253 characters + rule: self.matches("^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$") + version: + description: |- + version is a required field and is a reference to the version that this bundle represents + version follows the semantic versioning standard as defined in https://semver.org/. + type: string + x-kubernetes-validations: + - message: version must be well-formed semver + rule: self.matches("^([0-9]+)(\\.[0-9]+)?(\\.[0-9]+)?(-([-0-9A-Za-z]+(\\.[-0-9A-Za-z]+)*))?(\\+([-0-9A-Za-z]+(-\\.[-0-9A-Za-z]+)*))?") + required: + - name + - version + type: object + required: + - bundle + type: object + type: object + type: object + served: true + storage: true + subresources: + status: {} +--- +apiVersion: v1 +kind: ServiceAccount +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-controller-manager + namespace: olmv1-system +--- +apiVersion: v1 +kind: ServiceAccount +metadata: + name: operator-controller-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: Role +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-leader-election-role + namespace: olmv1-system +rules: +- apiGroups: + - "" + resources: + - configmaps + verbs: + - get + - list + - watch + - create + - update + - patch + - delete +- apiGroups: + - coordination.k8s.io + resources: + - leases + verbs: + - get + - list + - watch + - create + - update + - patch + - delete +- apiGroups: + - "" + resources: + - events + verbs: + - create + - patch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: Role +metadata: + name: catalogd-manager-role + namespace: olmv1-system +rules: +- apiGroups: + - "" + resources: + - secrets + - serviceaccounts + verbs: + - get + - list + - watch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: Role +metadata: + name: operator-controller-leader-election-role + namespace: olmv1-system +rules: +- apiGroups: + - "" + resources: + - configmaps + verbs: + - get + - list + - watch + - create + - update + - patch + - delete +- apiGroups: + - coordination.k8s.io + resources: + - leases + verbs: + - get + - list + - watch + - create + - update + - patch + - delete +- apiGroups: + - "" + resources: + - events + verbs: + - create + - patch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: Role +metadata: + name: operator-controller-manager-role + namespace: olmv1-system +rules: +- apiGroups: + - "" + resources: + - secrets + verbs: + - create + - delete + - deletecollection + - get + - list + - patch + - update + - watch +- apiGroups: + - "" + resources: + - serviceaccounts + verbs: + - get + - list + - watch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: catalogd-manager-role +rules: +- apiGroups: + - olm.operatorframework.io + resources: + - clustercatalogs + verbs: + - create + - delete + - get + - list + - patch + - update + - watch +- apiGroups: + - olm.operatorframework.io + resources: + - clustercatalogs/finalizers + verbs: + - update +- apiGroups: + - olm.operatorframework.io + resources: + - clustercatalogs/status + verbs: + - get + - patch + - update +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-metrics-reader +rules: +- nonResourceURLs: + - /metrics + verbs: + - get +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-proxy-role +rules: +- apiGroups: + - authentication.k8s.io + resources: + - tokenreviews + verbs: + - create +- apiGroups: + - authorization.k8s.io + resources: + - subjectaccessreviews + verbs: + - create +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: operator-controller-clusterextension-editor-role +rules: +- apiGroups: + - olm.operatorframework.io + resources: + - clusterextensions + verbs: + - create + - delete + - get + - list + - patch + - update + - watch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: operator-controller-clusterextension-viewer-role +rules: +- apiGroups: + - olm.operatorframework.io + resources: + - clusterextensions + verbs: + - get + - list + - watch +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: operator-controller-manager-role +rules: +- apiGroups: + - "" + resources: + - serviceaccounts/token + verbs: + - create +- apiGroups: + - apiextensions.k8s.io + resources: + - customresourcedefinitions + verbs: + - get +- apiGroups: + - olm.operatorframework.io + resources: + - clustercatalogs + verbs: + - get + - list + - watch +- apiGroups: + - olm.operatorframework.io + resources: + - clusterextensions + verbs: + - get + - list + - patch + - update + - watch +- apiGroups: + - olm.operatorframework.io + resources: + - clusterextensions/finalizers + verbs: + - update +- apiGroups: + - olm.operatorframework.io + resources: + - clusterextensions/status + verbs: + - patch + - update +- apiGroups: + - rbac.authorization.k8s.io + resources: + - clusterrolebindings + - clusterroles + - rolebindings + - roles + verbs: + - list + - watch +- apiGroups: + - "" + resources: + - groups + - users + verbs: + - impersonate +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: operator-controller-metrics-reader +rules: +- nonResourceURLs: + - /metrics + verbs: + - get +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRole +metadata: + name: operator-controller-proxy-role +rules: +- apiGroups: + - authentication.k8s.io + resources: + - tokenreviews + verbs: + - create +- apiGroups: + - authorization.k8s.io + resources: + - subjectaccessreviews + verbs: + - create +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: RoleBinding +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-leader-election-rolebinding + namespace: olmv1-system +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: Role + name: catalogd-leader-election-role +subjects: +- kind: ServiceAccount + name: catalogd-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: RoleBinding +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-manager-rolebinding + namespace: olmv1-system +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: Role + name: catalogd-manager-role +subjects: +- kind: ServiceAccount + name: catalogd-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: RoleBinding +metadata: + name: operator-controller-leader-election-rolebinding + namespace: olmv1-system +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: Role + name: operator-controller-leader-election-role +subjects: +- kind: ServiceAccount + name: operator-controller-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: RoleBinding +metadata: + name: operator-controller-manager-rolebinding + namespace: olmv1-system +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: Role + name: operator-controller-manager-role +subjects: +- kind: ServiceAccount + name: operator-controller-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRoleBinding +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-manager-rolebinding +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: ClusterRole + name: catalogd-manager-role +subjects: +- kind: ServiceAccount + name: catalogd-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRoleBinding +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-proxy-rolebinding +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: ClusterRole + name: catalogd-proxy-role +subjects: +- kind: ServiceAccount + name: catalogd-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRoleBinding +metadata: + name: operator-controller-manager-rolebinding +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: ClusterRole + name: operator-controller-manager-role +subjects: +- kind: ServiceAccount + name: operator-controller-controller-manager + namespace: olmv1-system +--- +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRoleBinding +metadata: + name: operator-controller-proxy-rolebinding +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: ClusterRole + name: operator-controller-proxy-role +subjects: +- kind: ServiceAccount + name: operator-controller-controller-manager + namespace: olmv1-system +--- +apiVersion: v1 +kind: Service +metadata: + labels: + app.kubernetes.io/name: catalogd + app.kubernetes.io/part-of: olm + name: catalogd-service + namespace: olmv1-system +spec: + ports: + - name: https + port: 443 + protocol: TCP + targetPort: 8443 + - name: webhook + port: 9443 + protocol: TCP + targetPort: 9443 + - name: metrics + port: 7443 + protocol: TCP + targetPort: 7443 + selector: + control-plane: catalogd-controller-manager +--- +apiVersion: v1 +kind: Service +metadata: + labels: + control-plane: operator-controller-controller-manager + name: operator-controller-service + namespace: olmv1-system +spec: + ports: + - name: https + port: 8443 + protocol: TCP + targetPort: 8443 + selector: + control-plane: operator-controller-controller-manager +--- +apiVersion: apps/v1 +kind: Deployment +metadata: + annotations: + kubectl.kubernetes.io/default-logs-container: manager + labels: + control-plane: catalogd-controller-manager + name: catalogd-controller-manager + namespace: olmv1-system +spec: + minReadySeconds: 5 + replicas: 1 + selector: + matchLabels: + control-plane: catalogd-controller-manager + template: + metadata: + annotations: + kubectl.kubernetes.io/default-container: manager + labels: + control-plane: catalogd-controller-manager + spec: + affinity: + nodeAffinity: + requiredDuringSchedulingIgnoredDuringExecution: + nodeSelectorTerms: + - matchExpressions: + - key: kubernetes.io/arch + operator: In + values: + - amd64 + - arm64 + - ppc64le + - s390x + - key: kubernetes.io/os + operator: In + values: + - linux + containers: + - args: + - --leader-elect + - --metrics-bind-address=:7443 + - --external-address=catalogd-service.olmv1-system.svc + - --tls-cert=/var/certs/tls.crt + - --tls-key=/var/certs/tls.key + - --pull-cas-dir=/var/ca-certs + command: + - ./catalogd + image: quay.io/operator-framework/catalogd:devel + imagePullPolicy: IfNotPresent + livenessProbe: + httpGet: + path: /healthz + port: 8081 + initialDelaySeconds: 15 + periodSeconds: 20 + name: manager + readinessProbe: + httpGet: + path: /readyz + port: 8081 + initialDelaySeconds: 5 + periodSeconds: 10 + resources: + requests: + cpu: 100m + memory: 200Mi + securityContext: + allowPrivilegeEscalation: false + capabilities: + drop: + - ALL + readOnlyRootFilesystem: true + terminationMessagePolicy: FallbackToLogsOnError + volumeMounts: + - mountPath: /var/cache/ + name: cache + - mountPath: /tmp + name: tmp + - mountPath: /var/certs + name: catalogserver-certs + - mountPath: /var/ca-certs/ + name: olmv1-certificate + readOnly: true + securityContext: + runAsNonRoot: true + seccompProfile: + type: RuntimeDefault + serviceAccountName: catalogd-controller-manager + terminationGracePeriodSeconds: 10 + volumes: + - emptyDir: {} + name: cache + - emptyDir: {} + name: tmp + - name: catalogserver-certs + secret: + secretName: catalogd-service-cert-git-version + - name: olmv1-certificate + secret: + items: + - key: ca.crt + path: olm-ca.crt + optional: false + secretName: catalogd-service-cert-git-version +--- +apiVersion: apps/v1 +kind: Deployment +metadata: + annotations: + kubectl.kubernetes.io/default-logs-container: manager + labels: + control-plane: operator-controller-controller-manager + name: operator-controller-controller-manager + namespace: olmv1-system +spec: + replicas: 1 + selector: + matchLabels: + control-plane: operator-controller-controller-manager + template: + metadata: + annotations: + kubectl.kubernetes.io/default-container: manager + labels: + control-plane: operator-controller-controller-manager + spec: + affinity: + nodeAffinity: + requiredDuringSchedulingIgnoredDuringExecution: + nodeSelectorTerms: + - matchExpressions: + - key: kubernetes.io/arch + operator: In + values: + - amd64 + - arm64 + - ppc64le + - s390x + - key: kubernetes.io/os + operator: In + values: + - linux + containers: + - args: + - --health-probe-bind-address=:8081 + - --metrics-bind-address=:8443 + - --leader-elect + - --feature-gates=SyntheticPermissions=true + - --feature-gates=WebhookProviderCertManager=true + - --feature-gates=WebhookProviderOpenshiftServiceCA=true + - --catalogd-cas-dir=/var/certs + - --pull-cas-dir=/var/certs + - --tls-cert=/var/certs/tls.cert + - --tls-key=/var/certs/tls.key + command: + - /operator-controller + image: quay.io/operator-framework/operator-controller:devel + imagePullPolicy: IfNotPresent + livenessProbe: + httpGet: + path: /healthz + port: 8081 + initialDelaySeconds: 15 + periodSeconds: 20 + name: manager + readinessProbe: + httpGet: + path: /readyz + port: 8081 + initialDelaySeconds: 5 + periodSeconds: 10 + resources: + requests: + cpu: 10m + memory: 64Mi + securityContext: + allowPrivilegeEscalation: false + capabilities: + drop: + - ALL + readOnlyRootFilesystem: true + terminationMessagePolicy: FallbackToLogsOnError + volumeMounts: + - mountPath: /var/cache + name: cache + - mountPath: /tmp + name: tmp + - mountPath: /var/certs/ + name: olmv1-certificate + readOnly: true + securityContext: + runAsNonRoot: true + seccompProfile: + type: RuntimeDefault + serviceAccountName: operator-controller-controller-manager + terminationGracePeriodSeconds: 10 + volumes: + - emptyDir: {} + name: cache + - emptyDir: {} + name: tmp + - name: olmv1-certificate + secret: + items: + - key: ca.crt + path: olm-ca.crt + - key: tls.crt + path: tls.cert + - key: tls.key + path: tls.key + optional: false + secretName: olmv1-cert +--- +apiVersion: cert-manager.io/v1 +kind: Certificate +metadata: + name: olmv1-ca + namespace: cert-manager +spec: + commonName: olmv1-ca + isCA: true + issuerRef: + group: cert-manager.io + kind: Issuer + name: self-sign-issuer + privateKey: + algorithm: ECDSA + size: 256 + secretName: olmv1-ca + secretTemplate: + annotations: + cert-manager.io/allow-direct-injection: "true" +--- +apiVersion: cert-manager.io/v1 +kind: Certificate +metadata: + name: catalogd-service-cert + namespace: olmv1-system +spec: + dnsNames: + - localhost + - catalogd-service.olmv1-system.svc + - catalogd-service.olmv1-system.svc.cluster.local + issuerRef: + group: cert-manager.io + kind: ClusterIssuer + name: olmv1-ca + privateKey: + algorithm: ECDSA + size: 256 + secretName: catalogd-service-cert-git-version +--- +apiVersion: cert-manager.io/v1 +kind: Certificate +metadata: + name: olmv1-cert + namespace: olmv1-system +spec: + dnsNames: + - operator-controller-service.olmv1-system.svc + - operator-controller-service.olmv1-system.svc.cluster.local + issuerRef: + group: cert-manager.io + kind: ClusterIssuer + name: olmv1-ca + privateKey: + algorithm: ECDSA + size: 256 + secretName: olmv1-cert +--- +apiVersion: cert-manager.io/v1 +kind: ClusterIssuer +metadata: + name: olmv1-ca +spec: + ca: + secretName: olmv1-ca +--- +apiVersion: cert-manager.io/v1 +kind: Issuer +metadata: + name: self-sign-issuer + namespace: cert-manager +spec: + selfSigned: {} +--- +apiVersion: networking.k8s.io/v1 +kind: NetworkPolicy +metadata: + name: catalogd-controller-manager + namespace: olmv1-system +spec: + egress: + - {} + ingress: + - ports: + - port: 7443 + protocol: TCP + - port: 8443 + protocol: TCP + - port: 9443 + protocol: TCP + podSelector: + matchLabels: + control-plane: catalogd-controller-manager + policyTypes: + - Ingress + - Egress +--- +apiVersion: networking.k8s.io/v1 +kind: NetworkPolicy +metadata: + name: default-deny-all-traffic + namespace: olmv1-system +spec: + podSelector: {} + policyTypes: + - Ingress + - Egress +--- +apiVersion: networking.k8s.io/v1 +kind: NetworkPolicy +metadata: + name: operator-controller-controller-manager + namespace: olmv1-system +spec: + egress: + - {} + ingress: + - ports: + - port: 8443 + protocol: TCP + podSelector: + matchLabels: + control-plane: operator-controller-controller-manager + policyTypes: + - Ingress + - Egress +--- +apiVersion: admissionregistration.k8s.io/v1 +kind: MutatingWebhookConfiguration +metadata: + annotations: + cert-manager.io/inject-ca-from-secret: cert-manager/olmv1-ca + name: catalogd-mutating-webhook-configuration +webhooks: +- admissionReviewVersions: + - v1 + clientConfig: + service: + name: catalogd-service + namespace: olmv1-system + path: /mutate-olm-operatorframework-io-v1-clustercatalog + port: 9443 + failurePolicy: Fail + matchConditions: + - expression: '''name'' in object.metadata && (!has(object.metadata.labels) || !(''olm.operatorframework.io/metadata.name'' + in object.metadata.labels) || object.metadata.labels[''olm.operatorframework.io/metadata.name''] + != object.metadata.name)' + name: MissingOrIncorrectMetadataNameLabel + name: inject-metadata-name.olm.operatorframework.io + rules: + - apiGroups: + - olm.operatorframework.io + apiVersions: + - v1 + operations: + - CREATE + - UPDATE + resources: + - clustercatalogs + sideEffects: None + timeoutSeconds: 10