From 760a196e6dcb29580e468b44b5400171dae184d8 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Thu, 29 Aug 2024 21:35:51 -0700 Subject: [PATCH] KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock commit 44d17459626052a2390457e550a12cb973506b2f upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao Fixes: 0bf50497f03b ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang Acked-by: Kai Huang Tested-by: Farrah Chen Signed-off-by: Sean Christopherson Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- Documentation/virt/kvm/locking.rst | 32 +++++++++++++++++++++--------- virt/kvm/kvm_main.c | 31 +++++++++++++++-------------- 2 files changed, 39 insertions(+), 24 deletions(-) diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst index 02880d5552d5fa..c0cb5ce51c1e02 100644 --- a/Documentation/virt/kvm/locking.rst +++ b/Documentation/virt/kvm/locking.rst @@ -9,7 +9,7 @@ KVM Lock Overview The acquisition orders for mutexes are as follows: -- cpus_read_lock() is taken outside kvm_lock +- cpus_read_lock() is taken outside kvm_lock and kvm_usage_lock - kvm->lock is taken outside vcpu->mutex @@ -24,6 +24,12 @@ The acquisition orders for mutexes are as follows: are taken on the waiting side when modifying memslots, so MMU notifiers must not take either kvm->slots_lock or kvm->slots_arch_lock. +cpus_read_lock() vs kvm_lock: +- Taking cpus_read_lock() outside of kvm_lock is problematic, despite that + being the official ordering, as it is quite easy to unknowingly trigger + cpus_read_lock() while holding kvm_lock. Use caution when walking vm_list, + e.g. avoid complex operations when possible. + For SRCU: - ``synchronize_srcu(&kvm->srcu)`` is called inside critical sections @@ -227,10 +233,17 @@ time it will be set using the Dirty tracking mechanism described above. :Type: mutex :Arch: any :Protects: - vm_list - - kvm_usage_count + +``kvm_usage_lock`` +^^^^^^^^^^^^^^^^^^ + +:Type: mutex +:Arch: any +:Protects: - kvm_usage_count - hardware virtualization enable/disable -:Comment: KVM also disables CPU hotplug via cpus_read_lock() during - enable/disable. +:Comment: Exists because using kvm_lock leads to deadlock (see earlier comment + on cpus_read_lock() vs kvm_lock). Note, KVM also disables CPU hotplug via + cpus_read_lock() when enabling/disabling virtualization. ``kvm->mn_invalidate_lock`` ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -290,11 +303,12 @@ time it will be set using the Dirty tracking mechanism described above. wakeup. ``vendor_module_lock`` -^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +^^^^^^^^^^^^^^^^^^^^^^ :Type: mutex :Arch: x86 :Protects: loading a vendor module (kvm_amd or kvm_intel) -:Comment: Exists because using kvm_lock leads to deadlock. cpu_hotplug_lock is - taken outside of kvm_lock, e.g. in KVM's CPU online/offline callbacks, and - many operations need to take cpu_hotplug_lock when loading a vendor module, - e.g. updating static calls. +:Comment: Exists because using kvm_lock leads to deadlock. kvm_lock is taken + in notifiers, e.g. __kvmclock_cpufreq_notifier(), that may be invoked while + cpu_hotplug_lock is held, e.g. from cpufreq_boost_trigger_state(), and many + operations need to take cpu_hotplug_lock when loading a vendor module, e.g. + updating static calls. diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index cb2b78e92910fb..7164a9ece20874 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -5575,6 +5575,7 @@ __visible bool kvm_rebooting; EXPORT_SYMBOL_GPL(kvm_rebooting); static DEFINE_PER_CPU(bool, hardware_enabled); +static DEFINE_MUTEX(kvm_usage_lock); static int kvm_usage_count; static int __hardware_enable_nolock(void) @@ -5607,10 +5608,10 @@ static int kvm_online_cpu(unsigned int cpu) * be enabled. Otherwise running VMs would encounter unrecoverable * errors when scheduled to this CPU. */ - mutex_lock(&kvm_lock); + mutex_lock(&kvm_usage_lock); if (kvm_usage_count) ret = __hardware_enable_nolock(); - mutex_unlock(&kvm_lock); + mutex_unlock(&kvm_usage_lock); return ret; } @@ -5630,10 +5631,10 @@ static void hardware_disable_nolock(void *junk) static int kvm_offline_cpu(unsigned int cpu) { - mutex_lock(&kvm_lock); + mutex_lock(&kvm_usage_lock); if (kvm_usage_count) hardware_disable_nolock(NULL); - mutex_unlock(&kvm_lock); + mutex_unlock(&kvm_usage_lock); return 0; } @@ -5649,9 +5650,9 @@ static void hardware_disable_all_nolock(void) static void hardware_disable_all(void) { cpus_read_lock(); - mutex_lock(&kvm_lock); + mutex_lock(&kvm_usage_lock); hardware_disable_all_nolock(); - mutex_unlock(&kvm_lock); + mutex_unlock(&kvm_usage_lock); cpus_read_unlock(); } @@ -5682,7 +5683,7 @@ static int hardware_enable_all(void) * enable hardware multiple times. */ cpus_read_lock(); - mutex_lock(&kvm_lock); + mutex_lock(&kvm_usage_lock); r = 0; @@ -5696,7 +5697,7 @@ static int hardware_enable_all(void) } } - mutex_unlock(&kvm_lock); + mutex_unlock(&kvm_usage_lock); cpus_read_unlock(); return r; @@ -5724,13 +5725,13 @@ static int kvm_suspend(void) { /* * Secondary CPUs and CPU hotplug are disabled across the suspend/resume - * callbacks, i.e. no need to acquire kvm_lock to ensure the usage count - * is stable. Assert that kvm_lock is not held to ensure the system - * isn't suspended while KVM is enabling hardware. Hardware enabling - * can be preempted, but the task cannot be frozen until it has dropped - * all locks (userspace tasks are frozen via a fake signal). + * callbacks, i.e. no need to acquire kvm_usage_lock to ensure the usage + * count is stable. Assert that kvm_usage_lock is not held to ensure + * the system isn't suspended while KVM is enabling hardware. Hardware + * enabling can be preempted, but the task cannot be frozen until it has + * dropped all locks (userspace tasks are frozen via a fake signal). */ - lockdep_assert_not_held(&kvm_lock); + lockdep_assert_not_held(&kvm_usage_lock); lockdep_assert_irqs_disabled(); if (kvm_usage_count) @@ -5740,7 +5741,7 @@ static int kvm_suspend(void) static void kvm_resume(void) { - lockdep_assert_not_held(&kvm_lock); + lockdep_assert_not_held(&kvm_usage_lock); lockdep_assert_irqs_disabled(); if (kvm_usage_count)