diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c deleted file mode 100644 index 20b857d006e4..000000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h deleted file mode 100644 index 3c4f3f2e82b4..000000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h +++ /dev/null @@ -1,950 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_NUCLEO32_F042K6 -#define BOARD_NAME "STMicroelectronics STM32 Nucleo32-F042K6" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -/* - * MCU type as defined in the ST header. - */ -#define STM32F042x6 - -/* - * IO pins assignments. - */ -#define GPIOA_ARD_A0 0U -#define GPIOA_ARD_A1 1U -#define GPIOA_VCP_TX 2U -#define GPIOA_ARD_A2 3U -#define GPIOA_ARD_A3 4U -#define GPIOA_ARD_A4 5U -#define GPIOA_ARD_A5 6U -#define GPIOA_ARD_A6 7U -#define GPIOA_ARD_D9 8U -#define GPIOA_ARD_D1 9U -#define GPIOA_ARD_D0 10U -#define GPIOA_ARD_D10 11U -#define GPIOA_ARD_D2 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_VCP_RX 15U - -#define GPIOB_ARD_D3 0U -#define GPIOB_ARD_D6 1U -#define GPIOB_PIN2 2U -#define GPIOB_ARD_D13 3U -#define GPIOB_LED_GREEN 3U -#define GPIOB_ARD_D12 4U -#define GPIOB_ARD_D11 5U -#define GPIOB_ARD_D5 6U -#define GPIOB_ARD_A5_ALT 6U -#define GPIOB_ARD_D4 7U -#define GPIOB_ARD_A4_ALT 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_ARD_D7 0U -#define GPIOF_ARD_D8 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) -#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) -#define LINE_VCP_TX PAL_LINE(GPIOA, 2U) -#define LINE_ARD_A2 PAL_LINE(GPIOA, 3U) -#define LINE_ARD_A3 PAL_LINE(GPIOA, 4U) -#define LINE_ARD_A4 PAL_LINE(GPIOA, 5U) -#define LINE_ARD_A5 PAL_LINE(GPIOA, 6U) -#define LINE_ARD_A6 PAL_LINE(GPIOA, 7U) -#define LINE_ARD_D9 PAL_LINE(GPIOA, 8U) -#define LINE_ARD_D1 PAL_LINE(GPIOA, 9U) -#define LINE_ARD_D0 PAL_LINE(GPIOA, 10U) -#define LINE_ARD_D10 PAL_LINE(GPIOA, 11U) -#define LINE_ARD_D2 PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_VCP_RX PAL_LINE(GPIOA, 15U) -#define LINE_ARD_D3 PAL_LINE(GPIOB, 0U) -#define LINE_ARD_D6 PAL_LINE(GPIOB, 1U) -#define LINE_ARD_D13 PAL_LINE(GPIOB, 3U) -#define LINE_LED_GREEN PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D12 PAL_LINE(GPIOB, 4U) -#define LINE_ARD_D11 PAL_LINE(GPIOB, 5U) -#define LINE_ARD_D5 PAL_LINE(GPIOB, 6U) -#define LINE_ARD_A5_ALT PAL_LINE(GPIOB, 6U) -#define LINE_ARD_D4 PAL_LINE(GPIOB, 7U) -#define LINE_ARD_A4_ALT PAL_LINE(GPIOB, 7U) -#define LINE_ARD_D7 PAL_LINE(GPIOF, 0U) -#define LINE_ARD_D8 PAL_LINE(GPIOF, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - ARD_A0 (input pullup). - * PA1 - ARD_A1 (input pullup). - * PA2 - VCP_TX (alternate 1). - * PA3 - ARD_A2 (input pullup). - * PA4 - ARD_A3 (input pullup). - * PA5 - ARD_A4 (input pullup). - * PA6 - ARD_A5 (input pullup). - * PA7 - ARD_A6 (input pullup). - * PA8 - ARD_D9 (input pullup). - * PA9 - ARD_D1 (input pullup). - * PA10 - ARD_D0 (input pullup). - * PA11 - ARD_D10 (input pullup). - * PA12 - ARD_D2 (input pullup). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - VCP_RX (alternate 1). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \ - PIN_MODE_INPUT(GPIOA_ARD_A1) | \ - PIN_MODE_ALTERNATE(GPIOA_VCP_TX) | \ - PIN_MODE_INPUT(GPIOA_ARD_A2) | \ - PIN_MODE_INPUT(GPIOA_ARD_A3) | \ - PIN_MODE_INPUT(GPIOA_ARD_A4) | \ - PIN_MODE_INPUT(GPIOA_ARD_A5) | \ - PIN_MODE_INPUT(GPIOA_ARD_A6) | \ - PIN_MODE_INPUT(GPIOA_ARD_D9) | \ - PIN_MODE_INPUT(GPIOA_ARD_D1) | \ - PIN_MODE_INPUT(GPIOA_ARD_D0) | \ - PIN_MODE_INPUT(GPIOA_ARD_D10) | \ - PIN_MODE_INPUT(GPIOA_ARD_D2) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_ALTERNATE(GPIOA_VCP_RX)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_VCP_TX) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_VCP_RX)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A1) | \ - PIN_OSPEED_LOW(GPIOA_VCP_TX) | \ - PIN_OSPEED_LOW(GPIOA_ARD_A2) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A3) | \ - PIN_OSPEED_LOW(GPIOA_ARD_A4) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A5) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A6) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D9) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D1) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D0) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D10) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D2) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_VCP_RX)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \ - PIN_PUPDR_FLOATING(GPIOA_VCP_TX) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A3) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A4) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A5) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A6) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D9) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D1) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D0) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D10) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_FLOATING(GPIOA_VCP_RX)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | \ - PIN_ODR_HIGH(GPIOA_ARD_A1) | \ - PIN_ODR_HIGH(GPIOA_VCP_TX) | \ - PIN_ODR_HIGH(GPIOA_ARD_A2) | \ - PIN_ODR_HIGH(GPIOA_ARD_A3) | \ - PIN_ODR_LOW(GPIOA_ARD_A4) | \ - PIN_ODR_HIGH(GPIOA_ARD_A5) | \ - PIN_ODR_HIGH(GPIOA_ARD_A6) | \ - PIN_ODR_HIGH(GPIOA_ARD_D9) | \ - PIN_ODR_HIGH(GPIOA_ARD_D1) | \ - PIN_ODR_HIGH(GPIOA_ARD_D0) | \ - PIN_ODR_HIGH(GPIOA_ARD_D10) | \ - PIN_ODR_HIGH(GPIOA_ARD_D2) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_VCP_RX)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | \ - PIN_AFIO_AF(GPIOA_VCP_TX, 1U) | \ - PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A3, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A4, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A5, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A6, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D9, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D1, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D0, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D10, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_VCP_RX, 1U)) - -/* - * GPIOB setup: - * - * PB0 - ARD_D3 (input pullup). - * PB1 - ARD_D6 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - ARD_D13 LED_GREEN (output pushpull maximum). - * PB4 - ARD_D12 (input pullup). - * PB5 - ARD_D11 (input pullup). - * PB6 - ARD_D5 ARD_A5_ALT (input pullup). - * PB7 - ARD_D4 ARD_A4_ALT (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_D3) | \ - PIN_MODE_INPUT(GPIOB_ARD_D6) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_OUTPUT(GPIOB_ARD_D13) | \ - PIN_MODE_INPUT(GPIOB_ARD_D12) | \ - PIN_MODE_INPUT(GPIOB_ARD_D11) | \ - PIN_MODE_INPUT(GPIOB_ARD_D5) | \ - PIN_MODE_INPUT(GPIOB_ARD_D4) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_D3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_D3) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D6) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D13) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D12) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D11) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D5) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D4) | \ - PIN_OSPEED_HIGH(GPIOB_PIN8) | \ - PIN_OSPEED_HIGH(GPIOB_PIN9) | \ - PIN_OSPEED_HIGH(GPIOB_PIN10) | \ - PIN_OSPEED_HIGH(GPIOB_PIN11) | \ - PIN_OSPEED_HIGH(GPIOB_PIN12) | \ - PIN_OSPEED_HIGH(GPIOB_PIN13) | \ - PIN_OSPEED_HIGH(GPIOB_PIN14) | \ - PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_D3) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOB_ARD_D13) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D12) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D11) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_D3) | \ - PIN_ODR_HIGH(GPIOB_ARD_D6) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_LOW(GPIOB_ARD_D13) | \ - PIN_ODR_HIGH(GPIOB_ARD_D12) | \ - PIN_ODR_HIGH(GPIOB_ARD_D11) | \ - PIN_ODR_HIGH(GPIOB_ARD_D5) | \ - PIN_ODR_HIGH(GPIOB_ARD_D4) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_D3, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D13, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D12, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D11, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D4, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input pullup). - * PC15 - PIN15 (input pullup). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_PIN0) | \ - PIN_OSPEED_HIGH(GPIOC_PIN1) | \ - PIN_OSPEED_HIGH(GPIOC_PIN2) | \ - PIN_OSPEED_HIGH(GPIOC_PIN3) | \ - PIN_OSPEED_HIGH(GPIOC_PIN4) | \ - PIN_OSPEED_HIGH(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_PIN6) | \ - PIN_OSPEED_HIGH(GPIOC_PIN7) | \ - PIN_OSPEED_HIGH(GPIOC_PIN8) | \ - PIN_OSPEED_HIGH(GPIOC_PIN9) | \ - PIN_OSPEED_HIGH(GPIOC_PIN10) | \ - PIN_OSPEED_HIGH(GPIOC_PIN11) | \ - PIN_OSPEED_HIGH(GPIOC_PIN12) | \ - PIN_OSPEED_HIGH(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_PIN14) | \ - PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ - PIN_OSPEED_HIGH(GPIOD_PIN1) | \ - PIN_OSPEED_HIGH(GPIOD_PIN2) | \ - PIN_OSPEED_HIGH(GPIOD_PIN3) | \ - PIN_OSPEED_HIGH(GPIOD_PIN4) | \ - PIN_OSPEED_HIGH(GPIOD_PIN5) | \ - PIN_OSPEED_HIGH(GPIOD_PIN6) | \ - PIN_OSPEED_HIGH(GPIOD_PIN7) | \ - PIN_OSPEED_HIGH(GPIOD_PIN8) | \ - PIN_OSPEED_HIGH(GPIOD_PIN9) | \ - PIN_OSPEED_HIGH(GPIOD_PIN10) | \ - PIN_OSPEED_HIGH(GPIOD_PIN11) | \ - PIN_OSPEED_HIGH(GPIOD_PIN12) | \ - PIN_OSPEED_HIGH(GPIOD_PIN13) | \ - PIN_OSPEED_HIGH(GPIOD_PIN14) | \ - PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ - PIN_OSPEED_HIGH(GPIOE_PIN1) | \ - PIN_OSPEED_HIGH(GPIOE_PIN2) | \ - PIN_OSPEED_HIGH(GPIOE_PIN3) | \ - PIN_OSPEED_HIGH(GPIOE_PIN4) | \ - PIN_OSPEED_HIGH(GPIOE_PIN5) | \ - PIN_OSPEED_HIGH(GPIOE_PIN6) | \ - PIN_OSPEED_HIGH(GPIOE_PIN7) | \ - PIN_OSPEED_HIGH(GPIOE_PIN8) | \ - PIN_OSPEED_HIGH(GPIOE_PIN9) | \ - PIN_OSPEED_HIGH(GPIOE_PIN10) | \ - PIN_OSPEED_HIGH(GPIOE_PIN11) | \ - PIN_OSPEED_HIGH(GPIOE_PIN12) | \ - PIN_OSPEED_HIGH(GPIOE_PIN13) | \ - PIN_OSPEED_HIGH(GPIOE_PIN14) | \ - PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - ARD_D7 (input pullup). - * PF1 - ARD_D8 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_ARD_D7) | \ - PIN_MODE_INPUT(GPIOF_ARD_D8) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_ARD_D7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_ARD_D8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_ARD_D7) | \ - PIN_OSPEED_HIGH(GPIOF_ARD_D8) | \ - PIN_OSPEED_HIGH(GPIOF_PIN2) | \ - PIN_OSPEED_HIGH(GPIOF_PIN3) | \ - PIN_OSPEED_HIGH(GPIOF_PIN4) | \ - PIN_OSPEED_HIGH(GPIOF_PIN5) | \ - PIN_OSPEED_HIGH(GPIOF_PIN6) | \ - PIN_OSPEED_HIGH(GPIOF_PIN7) | \ - PIN_OSPEED_HIGH(GPIOF_PIN8) | \ - PIN_OSPEED_HIGH(GPIOF_PIN9) | \ - PIN_OSPEED_HIGH(GPIOF_PIN10) | \ - PIN_OSPEED_HIGH(GPIOF_PIN11) | \ - PIN_OSPEED_HIGH(GPIOF_PIN12) | \ - PIN_OSPEED_HIGH(GPIOF_PIN13) | \ - PIN_OSPEED_HIGH(GPIOF_PIN14) | \ - PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_ARD_D7) | \ - PIN_PUPDR_PULLUP(GPIOF_ARD_D8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_ARD_D7) | \ - PIN_ODR_HIGH(GPIOF_ARD_D8) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_ARD_D7, 0U) | \ - PIN_AFIO_AF(GPIOF_ARD_D8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk deleted file mode 100644 index a830697a993a..000000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/DEVICE_ONE/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/DEVICE_ONE diff --git a/keyboards/akegata_denki/device_one/rules.mk b/keyboards/akegata_denki/device_one/rules.mk index 9519995cddf4..f8e76a5d3900 100644 --- a/keyboards/akegata_denki/device_one/rules.mk +++ b/keyboards/akegata_denki/device_one/rules.mk @@ -1,7 +1,7 @@ # MCU name MCU = STM32F042 -BOARD = DEVICE_ONE +BOARD = ST_NUCLEO32_F042K6 # Build Options # comment out to disable the options. diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h b/keyboards/chavdai40/board.h similarity index 100% rename from keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h rename to keyboards/chavdai40/board.h diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c b/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c deleted file mode 100644 index faf57654102c..000000000000 --- a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* CHTODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* CHTODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* CHTODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* CHTODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @note You can add your board-specific code here. - */ -void boardInit(void) { - -} diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index 3fff4fbbf817..000000000000 --- a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/ergodox_stm32/board.h b/keyboards/ergodox_stm32/board.h new file mode 100644 index 000000000000..23f949578944 --- /dev/null +++ b/keyboards/ergodox_stm32/board.h @@ -0,0 +1,37 @@ +/* +Copyright 2021 QMK + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include_next + +#ifdef STM32_LSECLK +#undef STM32_LSECLK +#endif // STM32_LSECLK +#define STM32_LSECLK 32768 + +#ifdef STM32_HSECLK +#undef STM32_HSECLK +#endif // STM32_HSECLK +#define STM32_HSECLK 8000000 + +#undef VAL_GPIOACRL +#define VAL_GPIOACRL 0x88888888 + +#undef VAL_GPIOAODR +#define VAL_GPIOAODR 0xFFFFFFFF + +#undef VAL_GPIOCCRH +#define VAL_GPIOCCRH 0x88888888 diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c deleted file mode 100644 index 41a603b9517a..000000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h deleted file mode 100644 index 307a17e38824..000000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Board identifier. - */ -#define BOARD_JM60 -#define BOARD_NAME "ErgoDox STM32 Keyboard" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 0 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - * - * Only xB (128KB Flash) is defined, but it's identical to the - * x8 version (64KB Flash) except for the Flash region size in the - * linker script. For x8 parts use xB here and change to the x8 linker - * script in the project Makefile. - */ -#define STM32F103xB - -/* - * IO pins assignments - * - * numbering is sorted by onboard/connectors, as from the schematics in - * http://www.vcc-gnd.com/read.php?tid=369 - */ - -/* on-board */ -#define GPIOA_USBDM 11 // pin 8 -#define GPIOA_USBDP 12 // pin 9 - -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -#define usb_lld_connect_bus(usbp) /* always connected */ - -/* - * USB bus de-activation macro, required by the USB driver. - */ -#define usb_lld_disconnect_bus(usbp) /* always connected */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk deleted file mode 100644 index 85ff835ef486..000000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD diff --git a/keyboards/ergodox_stm32/rules.mk b/keyboards/ergodox_stm32/rules.mk index cd1f2d97c4d3..c2eaaa52690d 100644 --- a/keyboards/ergodox_stm32/rules.mk +++ b/keyboards/ergodox_stm32/rules.mk @@ -2,7 +2,7 @@ MCU = STM32F103 MCU_LDSCRIPT = stm32f103_bootloader -BOARD = ERGODOX_STM32_BOARD +BOARD = ST_NUCLEO64_F103RB CFLAGS += "-Wno-error=deprecated" EXTRAFLAGS = -O0 -g diff --git a/keyboards/jm60/board.h b/keyboards/jm60/board.h new file mode 100644 index 000000000000..23f949578944 --- /dev/null +++ b/keyboards/jm60/board.h @@ -0,0 +1,37 @@ +/* +Copyright 2021 QMK + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include_next + +#ifdef STM32_LSECLK +#undef STM32_LSECLK +#endif // STM32_LSECLK +#define STM32_LSECLK 32768 + +#ifdef STM32_HSECLK +#undef STM32_HSECLK +#endif // STM32_HSECLK +#define STM32_HSECLK 8000000 + +#undef VAL_GPIOACRL +#define VAL_GPIOACRL 0x88888888 + +#undef VAL_GPIOAODR +#define VAL_GPIOAODR 0xFFFFFFFF + +#undef VAL_GPIOCCRH +#define VAL_GPIOCCRH 0x88888888 diff --git a/keyboards/jm60/boards/JM60_BOARD/board.c b/keyboards/jm60/boards/JM60_BOARD/board.c deleted file mode 100644 index 41a603b9517a..000000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/jm60/boards/JM60_BOARD/board.h b/keyboards/jm60/boards/JM60_BOARD/board.h deleted file mode 100644 index 74815122c3e0..000000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Board identifier. - */ -#define BOARD_JM60 -#define BOARD_NAME "JM60 keyboard" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - * - * Only xB (128KB Flash) is defined, but it's identical to the - * x8 version (64KB Flash) except for the Flash region size in the - * linker script. For x8 parts use xB here and change to the x8 linker - * script in the project Makefile. - */ -#define STM32F103xB - -/* - * IO pins assignments - * - * numbering is sorted by onboard/connectors, as from the schematics in - * http://www.vcc-gnd.com/read.php?tid=369 - */ - -/* on-board */ -#define GPIOA_USBDM 11 // pin 8 -#define GPIOA_USBDP 12 // pin 9 - -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -#define usb_lld_connect_bus(usbp) /* always connected */ - -/* - * USB bus de-activation macro, required by the USB driver. - */ -#define usb_lld_disconnect_bus(usbp) /* always connected */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/jm60/boards/JM60_BOARD/board.mk b/keyboards/jm60/boards/JM60_BOARD/board.mk deleted file mode 100644 index e2f051c314c7..000000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/JM60_BOARD/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/JM60_BOARD diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index 5992cc0559bd..6aa824baee5c 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -2,7 +2,7 @@ MCU = STM32F103 MCU_LDSCRIPT = jm60_bootloader -BOARD = JM60_BOARD +BOARD = ST_NUCLEO64_F103RB # Build Options # change yes to no to disable diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.h b/keyboards/matrix/m20add/board.h similarity index 100% rename from keyboards/matrix/m20add/boards/m20add_bd/board.h rename to keyboards/matrix/m20add/board.h diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.c b/keyboards/matrix/m20add/boards/m20add_bd/board.c deleted file mode 100644 index fa5723ec2bdd..000000000000 --- a/keyboards/matrix/m20add/boards/m20add_bd/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.mk b/keyboards/matrix/m20add/boards/m20add_bd/board.mk deleted file mode 100644 index a12d8670d5a7..000000000000 --- a/keyboards/matrix/m20add/boards/m20add_bd/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/m20add_bd/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/m20add_bd - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk index fb97c1d3c8f2..93ddf05e915b 100644 --- a/keyboards/matrix/m20add/rules.mk +++ b/keyboards/matrix/m20add/rules.mk @@ -8,7 +8,7 @@ MCU_LDSCRIPT = m20add_boot # Board: it should exist either in /os/hal/boards/ # or /boards -BOARD = m20add_bd +BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options. diff --git a/keyboards/matrix/noah/boards/noah_bd/board.h b/keyboards/matrix/noah/board.h similarity index 100% rename from keyboards/matrix/noah/boards/noah_bd/board.h rename to keyboards/matrix/noah/board.h diff --git a/keyboards/matrix/noah/boards/noah_bd/board.c b/keyboards/matrix/noah/boards/noah_bd/board.c deleted file mode 100644 index fa5723ec2bdd..000000000000 --- a/keyboards/matrix/noah/boards/noah_bd/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/matrix/noah/boards/noah_bd/board.mk b/keyboards/matrix/noah/boards/noah_bd/board.mk deleted file mode 100644 index 185f9e1e979c..000000000000 --- a/keyboards/matrix/noah/boards/noah_bd/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/noah_bd - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk index aacd2882b6cf..5566bd26ac6a 100644 --- a/keyboards/matrix/noah/rules.mk +++ b/keyboards/matrix/noah/rules.mk @@ -8,7 +8,7 @@ MCU_LDSCRIPT = noah_boot # Board: it should exist either in /os/hal/boards/ # or /boards -BOARD = noah_bd +BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options.