[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.52-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1123 SMP Wed Jun 27 17:35:49 BST 2018 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.0000 0] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x37800000 [ 0.000000] percpu: Embedded 17 pages/cpu @b6fbf000 s38720 r8192 d22720 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360 [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=PARTUUID=15ca46a5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.ignore-serial-consoles [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 887456K/917504K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 21856K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [) 0.000000] vmalloc : 0xb8800000 - 0xff800000 (1136 MB) [ 0.000000] lowmem : 0x80000000 - 0xb8000000 ( 896 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80800000 (8160 kB) [ 0.000000] .init : 0x80b00000 - 0x80c00000 (1024 kB) [ 0.000000] .data : 0x80c00000 - 0x80c8fef4 ( 576 kB) [ 0.000000] .bss : 0x80c96f40 - 0x80d47874 ( 707 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 25258 entries in 75 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] Switching to timer-based delay loop, resolution 52ns [ 0.000275] Console: colour dummy device 80x30 [ 0.000819] console [tty1] enabled [ 0.000861] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000901] pid_max: default: 32768 minimum: 301 [ 0.001233] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001266] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002220] Disabling memory control group subsystem [ 0.002312] CPU: Testing write buffer coherency: ok [ 0.002721] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003121] Setting up static identity map for 0x100000 - 0x10003c [ 0.003254] Hierarchical SRCU implementation. [ 0.003903] smp: Bringing up secondary CPUs ... [ 0.004605] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005359] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006096] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006199] smp: Brought up 1 node, 4 CPUs [ 0.006271] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006292] CPU: All CPU(s) started in HYP mode. [ 0.006310] CPU: Virtualization extensions available. [ 0.007171] devtmpfs: initialized [ 0.017244] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 [ 0.018003] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.018246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018290] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.018862] pinctrl core: initialized pinctrl subsystem [ 0.019619] NET: Registered protocol family 16 [ 0.022330] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.027220] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.027253] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.027474] Serial: AMBA PL011 UART driver [ 0.029155] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.029633] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.061570] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1 [ 0.063013] SCSI subsystem initialized [ 0.063253] usbcore: registered new interface driver usbfs [ 0.063323] usbcore: registered new interface driver hub [ 0.063423] usbcore: registered new device driver usb [ 0.070081] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-07-03 14:15 [ 0.071486] clocksource: Switched to clocksource arch_sys_counter [ 0.147596] VFS: Disk quotas dquot_6.6.0 [ 0.147710] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.147912] FS-Cache: Loaded [ 0.148124] CacheFiles: Loaded [ 0.156965] NET: Registered protocol family 2 [ 0.157705] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.157835] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.158037] TCP: Hash tables configured (established 8192 bind 8192) [ 0.158183] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.158244] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.158487] NET: Registered protocol family 1 [ 0.158944] RPC: Registered named UNIX socket transport module. [ 0.158967] RPC: Registered udp transport module. [ 0.158986] RPC: Registered tcp transport module. [ 0.159005] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.160600] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.163354] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.171299] FS-Cache: Netfs 'nfs' registered for caching [ 0.171950] NFS: Registeling the id_resolver key type [ 0.171996] Key type id_resolver registered [ 0.172016] Key type id_legacy registered [ 0.172044] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.173950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.174098] io scheduler noop registered [ 0.174120] io scheduler deadline registered (default) [ 0.174408] io scheduler cfq registered [ 0.174430] io scheduler mq-deadline registered [ 0.174449] io scheduler kyber registered [ 0.176751] BCM2708FB: allocated DMA memory f7900000 [ 0.176795] BCM2708FB: allocated DMA channel 0 @ b8813000 [ 0.226656] Console: switching to colour frame buffer device 228x61 [ 0.256168] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.257851] bcm2835-rng 3f104000.rng: hwrng registered [ 0.258136] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.258852] vc-sm: Videocore shared memory driver [ 0.259271] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.269054] brd: module loaded [ 0.278090] loop: module loaded [ 0.278217] Loading iSCSI transport class v2.0-870. [ 0.279014] libphy: Fixed MDIO Bus: probed [ 0.279243] usbcore: registered new interface driver lan78xx [ 0.279459] usbcore: registered new interface driver smsc95xx [ 0.279638] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.507951] Core Release: 2.80a [ 0.508057] Setting default values for core params [ 0.508228] Finished setting default values for core params [ 0.708650] Using Buffer DMA mode [ 0.708758] Periodic Transfer Interrupt Enhancement - disabled [ 0.708926] Multiprocessor Interrupt Enhancement - disabled [ 0.709089] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.709224] Dedicated Tx FIFOs mode [ 0.709693] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7914000 dma = 0xf7914000 len=9024 [ 0.709979] FIQ FSM acceleration enabled for : [ 0.709979] Non-periodic Split Transactions [ 0.709979] Periodic Split Transactions [ 0.709979] High-Speed Isochronous Endpoints [ 0.709979] Interrupt/Control Split Transaction hack enabled [ 0.717411] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e7fa8 [ 0.724396] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e8310 length 36 [ 0.731259] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000 [ 0.738187] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.745010] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.751941] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.758813] Init: Port Power? op_state=1 [ 0.765546] Init: Power Port (0) [ 0.772480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.779282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.786270] usb usb1: Product: DWC OTG Controller [ 0.793223] usb usb1: Manufacturer: Linux 4.14.52-v7+ dwc_otg_hcd [ 0.800108] usb usb1: SerialNumber: 3f980000.usb [ 0.807605] hub 1-0:1.0: USB hub found [ 0.814351] hub 1-0:1.0: 1 port detected [ 0.821863] usbcore: registered new interface driver usb-storage [ 0.828702] mousedev: PS/2 mouse device common for all mice [ 0.835546] IR NEC protocol handler initialized [ 0.842345] IR RC5(x/sz) protocol handler initialized [ 0.849044] IR RC6 protocol handler initialized [ 0.855749] IR JVC protocol handler initialized [ 0.862252] IR Sony protocol handler initialized [ 0.868795] IR SANYO protocol handler initialized [ 0.875382] IR Sharp protocol handler initialized [ 0.881844] IR MCE Keyboard/mouse protocol handler initialized [ 0.888445] IR XMP protocol handler initialized [ 0.895731] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.902753] bcm2835-cpufreq: min=600000 max=1400000 [ 0.909872] sdhci: Secure Digital Host Controller Interface driver [ 0.916617] sdhci: Copyright(c) Pierre Ossman [ 0.923818] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.930874] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.937769] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.946701] ledtrig-cpu: registered to indicate activity on CPUs [ 0.953537] hidraw: raw HID events driver (C) Jiri Kosina [ 0.960278] usbcore: registered new interface driver usbhid [ 0.966939] usbhid: USB HID core driver [ 0.974265] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0 [ 0.982530] [vc_sm_connected_init]: start [ 0.992691] [vc_sm_connected_init]: end - returning 0 [ 1.000052] Initializing XFRM netlink socket [ 1.006845] NET: Registered protocol family 17 [ 1.013625] Key type dns_resolver registered [ 1.020841] Registering SWP/SWPB emulation handler [ 1.028091] registered taskstats version 1 [ 1.034888] Indeed it is in host mode hprt0 = 00021501 [ 1.047367] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 1.054253] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.129892] random: fast init done [ 1.251530] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.251674] Indeed it is in host mode hprt0 = 00001101 [ 1.491770] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.491781] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.492454] hub 1-1:1.0: USB hub found [ 1.492531] hub 1-1:1.0: 4 ports detected [ 1.811511] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.941737] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 1.941746] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.942224] hub 1-1.1:1.0: USB hub found [ 1.942303] hub 1-1.1:1.0: 3 ports detected [ 2.051512] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 2.071721] Under-voltage detected! (0x00050005) [ 2.165497] console [ttyAMA0] enabled [ 2.177801] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 50000000) is a 16550 [ 2.181944] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101 [ 2.181953] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.181960] usb 1-1.3: Product: USB 2.0 Hub [ 2.182484] hub 1-1.3:1.0: USB hub found [ 2.182573] hub 1-1.3:1.0: 4 ports detected [ 2.254827] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 2.267498] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 2.332210] sdhost: log_buf @ b7913000 (f7913000) [ 2.379313] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.393232] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.407063] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.421511] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.434713] of_cfs_init [ 2.443927] of_cfs_init: OK [ 2.453700] uart-pl011 3f201000.serial: no DMA platform data [ 2.453805] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.478129] Waiting for root device PARTUUID=15ca46a5-02... [ 2.499040] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.501677] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 2.530291] mmc0: new high speed SDHC card at address 59b4 [ 2.543226] mmcblk0: mmc0:59b4 00000 29.8 GiB [ 2.555928] mmcblk0: p1 p2 [ 2.575666] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.581757] mmc1: new high speed SDIO card at address 0001 [ 2.602286] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.631978] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.646170] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.660778] usb 1-1.3.1: Product: USB 2.0 Hub [ 2.673083] hub 1-1.3.1:1.0: USB hub found [ 2.684417] hub 1-1.3.1:1.0: 4 ports detected [ 2.741530] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg [ 2.882018] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800 [ 2.896299] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.981511] usb 1-1.3.2: new high-speed USB device number 7 using dwc_otg [ 3.133163] usb 1-1.3.2: New USB device found, idVendor=2001, idProduct=4a00 [ 3.147352] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.161918] usb 1-1.3.2: Product: D-Link DUB-1312 [ 3.173687] usb 1-1.3.2: Manufacturer: D-Link Elec. Corp. [ 3.186126] usb 1-1.3.2: SerialNumber: 00000000000E37 [ 3.203504] libphy: lan78xx-mdiobus: probed [ 3.261523] usb 1-1.3.1.1: new high-speed USB device number 8 using dwc_otg [ 3.401967] usb 1-1.3.1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 3.416203] usb 1-1.3.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.430838] usb 1-1.3.1.1: Product: USB 2.0 Hub [ 3.443009] hub 1-1.3.1.1:1.0: USB hub found [ 3.454319] hub 1-1.3.1.1:1.0: 4 ports detected [ 3.511518] usb 1-1.3.4: new full-speed USB device number 9 using dwc_otg [ 3.664785] usb 1-1.3.4: New USB device found, idVendor=045e, idProduct=0745 [ 3.678817] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.693351] usb 1-1.3.4: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 3.706896] usb 1-1.3.4: Manufacturer: Microsoft [ 3.725838] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/0003:045E:0745.0001/input/input0 [ 3.788087] EXT4-fs (mmcblk0p2): recovery complete [ 3.811522] usb 1-1.3.1.1.1: new high-speed USB device number 10 using dwc_otg [ 3.826862] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input0 [ 3.849326] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.863071] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/0003:045E:0745.0002/input/input1 [ 3.888634] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.916504] devtmpfs: mounted [ 3.930754] Freeing unused kernel memory: 1024K [ 3.951999] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input1 [ 3.982421] usb 1-1.3.1.1.1: New USB device found, idVendor=1058, idProduct=0748 [ 3.998689] usb 1-1.3.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 4.015310] usb 1-1.3.1.1.1: Product: My Passport 0748 [ 4.029189] usb 1-1.3.1.1.1: Manufacturer: Western Digital [ 4.043541] usb 1-1.3.1.1.1: SerialNumber: 575841314534324D58453637 [ 4.063937] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:045E:0745.0003/input/input2 [ 4.089739] usb-storage 1-1.3.1.1.1:1.0: USB Mass Storage device detected [ 4.106485] scsi host0: usb-storage 1-1.3.1.1.1:1.0 [ 4.151990] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.3.4/input2 [ 4.645761] systemd[1]: System time before build time, advancing clock. [ 4.821458] NET: Registered protocol family 10 [ 4.837277] Segment Routing with IPv6 [ 4.862426] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.914718] random: systemd: uninitialized urandom read (16 bytes read) [ 4.939046] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.968198] systemd[1]: Detected architecture arm. Welcome to Raspbian GNU/Linux 9 (stretch)! [ 5.024887] systemd[1]: Set hostname to . [ 5.084818] random: systemd: uninitialized urandom read (16 bytes read) [ 5.101679] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 5.202189] scsi 0:0:0:0: Direct-Access WD My Passport 0748 1019 PQ: 0 ANSI: 6 [ 5.221907] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.241234] sd 0:0:0:0: [sda] Write Protect is off [ 5.256648] scsi 0:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 [ 5.275667] sd 0:0:0:0: [sda] No Caching mode page found [ 5.291612] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.788470] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.831978] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.881835] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.951679] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.992442] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.042466] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 6.092330] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... [ OK ] Created slice system-autologin.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. Mounting RPC Pipe File System... [ OK ] Listening on udev Kernel Socket. [ OK ] Liste[ 6.312887] random: crng init done [ 6.328173] random: 7 urandom warning(s) missed due to ratelimiting ning on Journal Socket. Starting File System Check on Root Device... Starting Create list of required st…ce nodes for the current kernel... Starting Load Kernel Modules... Starting Set the console keyboard layout... [ 6.510061] i2c /dev entries driver [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Mounting POSIX Message Queue File System... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Reached target Slices. [ OK ] Mounted RPC Pipe File System. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Mounting Configuration File System... Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... [ OK ] Mounted Configuration File System. [ OK ] Started Set the console keyboard layout. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. Starting Show Plymouth Boot Screen... Raspbian GNU/Linux 9 pi-desktop ttyAMA0 pi-desktop login: [ 183.034897] Under-voltage detected! (0x00050005) [ 8978.978622] Unable to handle kernel paging request at virtual address 40018684 [ 8978.986062] pgd = 80004000 [ 8978.988923] [40018684] *pgd=00000000 [ 8978.992774] Internal error: Oops: 5 [#1] SMP ARM [ 8978.997384] Modules linked in: fuse bluetooth ecdh_generic sg rtc_pcf8563 ax88179_178a joydev evdev spidev brcmfmac brcmutil cfg80211 rfkill snd_bcm2835(C) snd_pcm snd_timer snd i2c_bcm2835 spi_bcm2835 fixed uio_pdrv_genirq uio i2c_dev ip_tables x_tables ipv6 [ 8979.020374] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 4.14.52-v7+ #1123 [ 8979.028195] Hardware name: BCM2835 [ 8979.031587] task: 80c06cc0 task.stack: 80c00000 [ 8979.036115] PC is at lan78xx_bh+0x118/0x7a0 [ 8979.040295] LR is at _raw_spin_unlock_irqrestore+0x3c/0x70 [ 8979.045771] pc : [<805a096c>] lr : [<807a17bc>] psr: 80000113 [ 8979.052028] sp : 80c01d28 ip : 80c04174 fp : 80c01d6c [ 8979.057243] r10: 00000040 r9 : b68cf558 r8 : b68cf500 [ 8979.062459] r7 : 00000002 r6 : b68cf558 r5 : 00000002 r4 : 0000004a [ 8979.068977] r3 : 00000001 r2 : 40018680 r1 : 00002328 r0 : 00000000 [ 8979.075496] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 8979.082622] Control: 10c5383d Table: 331c806a DAC: 00000055 [ 8979.088360] Process swapper/0 (pid: 0, stack limit = 0x80c00210) [ 8979.094358] Stack: (0x80c01d28 to 0x80c02000) [ 8979.098708] 1d20: 80c01d94 b68cf538 80690910 8067c8f0 0c0085ee 80c04a84 [ 8979.106878] 1d40: 36439000 b68cf568 b68cf56c 00000000 00000000 80b86310 00000018 00000040 [ 8979.115048] 1d60: 80c01d94 80c01d70 80123cc0 805a0860 80123c4c 80c02098 00000006 80c00018 [ 8979.123218] 1d80: 00000100 b6806180 80c01dfc 80c01d98 80101694 80123c58 80c01dbc 80c01da8 [ 8979.131389] 1da0: 00000001 00200102 80c02d00 000d3e36 00000007 80c978c0 80c88730 80c03d68 [ 8979.139559] 1dc0: 80b86378 80c02080 80c01d98 00000007 80174f64 80b8e92c 00000000 00000000 [ 8979.147729] 1de0: 00000001 b6806180 80c00000 00000001 80c01e0c 80c01e00 8012378c 80101514 [ 8979.155899] 1e00: 80c01e34 80c01e10 801755a8 801236b8 80c01e50 80c046cc 60000013 ffffffff [ 8979.164070] 1e20: 80c01e84 8079be94 80c01e4c 80c01e38 80101504 80175544 80c04174 80145b30 [ 8979.172240] 1e40: 80c01ee4 80c01e50 807a1abc 80101468 b3243c00 00000000 36439000 00000000 [ 8979.180411] 1e60: 80b8ed40 00000000 b3243c00 b6fc7d40 8079be94 0000082a 00000001 80c01ee4 [ 8979.188581] 1e80: 80c04174 80c01ea0 80145af8 80145b30 60000013 ffffffff 80145af8 00000000 [ 8979.196751] 1ea0: 8013f34c 80102da0 b6214018 80c06cc0 36439000 80c06cc0 b590e700 b6fc7d40 [ 8979.204921] 1ec0: 80c06cc0 b6be0000 00000000 b590e700 0000082a 80b8ed40 80c01f44 80c01ee8 [ 8979.213092] 1ee0: 8079be94 80145a6c 00000002 b6fc4600 91564a00 20000093 80c03dcc 8014ce18 [ 8979.221262] 1f00: 808024bc 36439000 8079c928 b6fc7d40 00000000 00000000 80c01f5c 80c00000 [ 8979.229432] 1f20: 80c03dcc 80c03d68 80c88332 00000001 80b60a30 b77ff980 80c01f5c 80c01f48 [ 8979.237602] 1f40: 8079c928 8079bb4c b6fc832c 80c00000 80c01f84 80c01f60 80161244 8079c8f0 [ 8979.245773] 1f60: 80b862c4 000000be 80c96f40 80c03d40 ffffffff 80c96f40 80c01f94 80c01f88 [ 8979.253943] 1f80: 80161528 80161148 80c01fac 80c01f98 8079af54 8016150c 80c0f7f0 80c96f90 [ 8979.262113] 1fa0: 80c01ff4 80c01fb0 80b00df8 8079aea4 ffffffff ffffffff 00000000 80b00750 [ 8979.270283] 1fc0: 00000000 80b60a30 00000000 80c971d4 80c03d58 80b60a2c 80c08a2c 0000406a [ 8979.278453] 1fe0: 410fd034 00000000 00000000 80c01ff8 0000807c 80b00a30 00000000 00000000 [ 8979.286637] [<805a096c>] (lan78xx_bh) from [<80123cc0>] (tasklet_action+0x74/0x10c) [ 8979.294295] [<80123cc0>] (tasklet_action) from [<80101694>] (__do_softirq+0x18c/0x3d8) [ 8979.302209] [<80101694>] (__do_softirq) from [<8012378c>] (irq_exit+0xe0/0x144) [ 8979.309514] [<8012378c>] (irq_exit) from [<801755a8>] (__handle_domain_irq+0x70/0xc4) [ 8979.317340] [<801755a8>] (__handle_domain_irq) from [<80101504>] (bcm2836_arm_irqchip_handle_irq+0xa8/0xac) [ 8979.327077] [<80101504>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 8979.335939] Exception stack(0x80c01e50 to 0x80c01e98) [ 8979.340983] 1e40: b3243c00 00000000 36439000 00000000 [ 8979.349153] 1e60: 80b8ed40 00000000 b3243c00 b6fc7d40 8079be94 0000082a 00000001 80c01ee4 [ 8979.357322] 1e80: 80c04174 80c01ea0 80145af8 80145b30 60000013 ffffffff [ 8979.363934] [<807a1abc>] (__irq_svc) from [<80145b30>] (finish_task_switch+0xd0/0x22c) [ 8979.371850] [<80145b30>] (finish_task_switch) from [<8079be94>] (__schedule+0x354/0x978) [ 8979.379937] [<8079be94>] (__schedule) from [<8079c928>] (schedule_idle+0x44/0x84) [ 8979.387414] [<8079c928>] (schedule_idle) from [<80161244>] (do_idle+0x108/0x150) [ 8979.394805] [<80161244>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 8979.402369] [<80161528>] (cpu_startup_entry) from [<8079af54>] (rest_init+0xbc/0xc0) [ 8979.410107] [<8079af54>] (rest_init) from [<80b00df8>] (start_kernel+0x3d4/0x3e0) [ 8979.417588] Code: e1a03004 e1a07005 ea000007 e59920a4 (e1d220b4) [ 8979.423929] ---[ end trace 51560e314c643c7c ]--- [ 8979.428710] Kernel panic - not syncing: Fatal exception in interrupt [ 8979.435063] CPU2: stopping [ 8979.437766] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G D C 4.14.52-v7+ #1123 [ 8979.445848] Hardware name: BCM2835 [ 8979.449256] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 8979.456995] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 8979.464299] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 8979.471690] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 8979.480644] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 8979.489507] Exception stack(0xb6943e68 to 0xb6943eb0) [ 8979.494551] 3e60: 00000001 00000000 80c978c0 00000000 b68cf568 b68cf56c [ 8979.502722] 3e80: 00000000 00000000 80b86310 00000018 00000040 b6943edc 80c04174 b6943eb8 [ 8979.510891] 3ea0: 80123d40 80123d44 68000013 ffffffff [ 8979.515940] [<807a1abc>] (__irq_svc) from [<80123d44>] (tasklet_action+0xf8/0x10c) [ 8979.523504] [<80123d44>] (tasklet_action) from [<80101694>] (__do_softirq+0x18c/0x3d8) [ 8979.531414] [<80101694>] (__do_softirq) from [<80123428>] (run_ksoftirqd+0x44/0x6c) [ 8979.539066] [<80123428>] (run_ksoftirqd) from [<80141d9c>] (smpboot_thread_fn+0x124/0x1a4) [ 8979.547325] [<80141d9c>] (smpboot_thread_fn) from [<8013d97c>] (kthread+0x13c/0x16c) [ 8979.555065] [<8013d97c>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 8979.562278] CPU1: stopping [ 8979.564979] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D C 4.14.52-v7+ #1123 [ 8979.572799] Hardware name: BCM2835 [ 8979.576196] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 8979.583932] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 8979.591235] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 8979.598624] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 8979.607577] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 8979.616440] Exception stack(0xb6925f38 to 0xb6925f80) [ 8979.621482] 5f20: 00000000 1eaddbac [ 8979.629652] 5f40: 3644a000 00000000 b6924000 80c03dcc 80c03d68 80c88332 00000001 410fd034 [ 8979.637822] 5f60: 00000000 b6925f94 80c04174 b6925f88 80108a4c 80108a50 68000013 ffffffff [ 8979.645995] [<807a1abc>] (__irq_svc) from [<80108a50>] (arch_cpu_idle+0x34/0x4c) [ 8979.653388] [<80108a50>] (arch_cpu_idle) from [<807a120c>] (default_idle_call+0x34/0x48) [ 8979.661473] [<807a120c>] (default_idle_call) from [<80161214>] (do_idle+0xd8/0x150) [ 8979.669123] [<80161214>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 8979.676686] [<80161528>] (cpu_startup_entry) from [<8010df50>] (secondary_start_kernel+0x130/0x13c) [ 8979.685724] [<8010df50>] (secondary_start_kernel) from [<0010196c>] (0x10196c) [ 8979.692937] CPU3: stopping [ 8979.695638] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D C 4.14.52-v7+ #1123 [ 8979.703458] Hardware name: BCM2835 [ 8979.706855] [<8010ffd8>] (unwind_backtrace) from [<8010c240>] (show_stack+0x20/0x24) [ 8979.714592] [<8010c240>] (show_stack) from [<80785e84>] (dump_stack+0xd4/0x118) [ 8979.721894] [<80785e84>] (dump_stack) from [<8010e458>] (handle_IPI+0x2bc/0x33c) [ 8979.729284] [<8010e458>] (handle_IPI) from [<801014d8>] (bcm2836_arm_irqchip_handle_irq+0x7c/0xac) [ 8979.738237] [<801014d8>] (bcm2836_arm_irqchip_handle_irq) from [<807a1abc>] (__irq_svc+0x5c/0x7c) [ 8979.747100] Exception stack(0xb6929f38 to 0xb6929f80) [ 8979.752142] 9f20: 00000000 0337aef4 [ 8979.760312] 9f40: 3646c000 00000000 b6928000 80c03dcc 80c03d68 80c88332 00000001 410fd034 [ 8979.768482] 9f60: 00000000 b6929f94 80c04174 b6929f88 80108a4c 80108a50 68000013 ffffffff [ 8979.776654] [<807a1abc>] (__irq_svc) from [<80108a50>] (arch_cpu_idle+0x34/0x4c) [ 8979.784044] [<80108a50>] (arch_cpu_idle) from [<807a120c>] (default_idle_call+0x34/0x48) [ 8979.792129] [<807a120c>] (default_idle_call) from [<80161214>] (do_idle+0xd8/0x150) [ 8979.799779] [<80161214>] (do_idle) from [<80161528>] (cpu_startup_entry+0x28/0x2c) [ 8979.807342] [<80161528>] (cpu_startup_entry) from [<8010df50>] (secondary_start_kernel+0x130/0x13c) [ 8979.816381] [<8010df50>] (secondary_start_kernel) from [<0010196c>] (0x10196c) [ 8979.823603] ---[ end Kernel panic - not syncing: Fatal exception in interrupt