Update for release 4.19.102.20200211

README.md

@@ -23,8 +23,8 @@ Each kernel release tarball currently provides the following files:
 * `/boot/config` (the configuration used to build the kernel);
 * `/boot/Module.symvers.xz` (a table mapping exported symbols to provider, compressed);
 * `/boot/System.map.xz` (the kernel's symbol table, compressed);
-* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `4.19.97.20200204` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
-* `/boot/overlays/...` (the device tree blob overlays) (from `4.19.97.20200204`);
+* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `4.19.102.20200211` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
+* `/boot/overlays/...` (the device tree blob overlays) (from `4.19.102.20200211`);
 * `/lib/modules/<kernel release name>/...` (the module set for the kernel);
 * `/lib/firmware/...` (the kernel-built firmware, for [< 4.14 only](http://lkml.iu.edu/hypermail/linux/kernel/1709.1/04650.html)).
 
@@ -36,7 +36,7 @@ The current kernel tarball may be downloaded from the link below (or via `wget`,
 
 Variant | Version | Most Recent Image
 :--- | ---: | ---:
-Kernel, dtbs, modules and (kernel) firmware | 4.19.97.20200204 | [bcmrpi3-kernel-4.19.97.20200204.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.97.20200204/bcmrpi3-kernel-4.19.97.20200204.tar.xz)
+Kernel, dtbs, modules and (kernel) firmware | 4.19.102.20200211 | [bcmrpi3-kernel-4.19.102.20200211.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200211/bcmrpi3-kernel-4.19.102.20200211.tar.xz)
 
 The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) may be viewed [here](https://github.com/sakaki-/bcmrpi3-kernel/blob/master/config).
 
@@ -47,8 +47,8 @@ The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) ma
 To deploy (assuming that your RPi3's micro SD-card's first partition is mounted as `/boot`, and you are already running a 64-bit RPi3 image, such as my [gentoo-on-rpi3-64bit](https://github.com/sakaki-/gentoo-on-rpi3-64bit)) simply download, untar into the root directory, and reboot:
 ```console
 pi64 ~ # cp /boot/kernel8.img{,.old}
-pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.97.20200204/bcmrpi3-kernel-4.19.97.20200204.tar.xz
-pi64 ~ # tar -xJf bcmrpi3-kernel-4.19.97.20200204.tar.xz -C /
+pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200211/bcmrpi3-kernel-4.19.102.20200211.tar.xz
+pi64 ~ # tar -xJf bcmrpi3-kernel-4.19.102.20200211.tar.xz -C /
 pi64 ~ # sync && reboot
 ```
 

config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm64 4.19.97 Kernel Configuration
+# Linux/arm64 4.19.102 Kernel Configuration
 #
 
 #
@@ -19,7 +19,7 @@ CONFIG_THREAD_INFO_IN_TASK=y
 #
 CONFIG_INIT_ENV_ARG_LIMIT=32
 # CONFIG_COMPILE_TEST is not set
-CONFIG_LOCALVERSION="-v8-3508d8f3326c"
+CONFIG_LOCALVERSION="-v8-6567eca5d50c"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_BUILD_SALT=""
 CONFIG_DEFAULT_HOSTNAME="(none)"
@@ -3089,7 +3089,39 @@ CONFIG_MFD_WM5102=y
 # CONFIG_MFD_ROHM_BD718XX is not set
 # CONFIG_RAVE_SP_CORE is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_RC_CORE is not set
+CONFIG_RC_CORE=y
+CONFIG_RC_MAP=y
+CONFIG_LIRC=y
+CONFIG_BPF_LIRC_MODE2=y
+CONFIG_RC_DECODERS=y
+CONFIG_IR_NEC_DECODER=m
+CONFIG_IR_RC5_DECODER=m
+CONFIG_IR_RC6_DECODER=m
+CONFIG_IR_JVC_DECODER=m
+CONFIG_IR_SONY_DECODER=m
+CONFIG_IR_SANYO_DECODER=m
+CONFIG_IR_SHARP_DECODER=m
+CONFIG_IR_MCE_KBD_DECODER=m
+CONFIG_IR_XMP_DECODER=m
+CONFIG_IR_IMON_DECODER=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_ATI_REMOTE=m
+# CONFIG_IR_HIX5HD2 is not set
+CONFIG_IR_IMON=m
+# CONFIG_IR_IMON_RAW is not set
+CONFIG_IR_MCEUSB=m
+CONFIG_IR_REDRAT3=m
+# CONFIG_IR_SPI is not set
+CONFIG_IR_STREAMZAP=m
+# CONFIG_IR_IGORPLUGUSB is not set
+CONFIG_IR_IGUANA=m
+CONFIG_IR_TTUSBIR=m
+CONFIG_RC_LOOPBACK=m
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_IR_PWM_TX=m
+# CONFIG_IR_SERIAL is not set
+# CONFIG_IR_SIR is not set
 CONFIG_MEDIA_SUPPORT=m
 
 #
@@ -3211,10 +3243,13 @@ CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
 #
 CONFIG_VIDEO_AU0828=m
 CONFIG_VIDEO_AU0828_V4L2=y
+# CONFIG_VIDEO_AU0828_RC is not set
+# CONFIG_VIDEO_TM6000 is not set
 
 #
 # Digital TV USB devices
 #
+# CONFIG_DVB_USB is not set
 CONFIG_DVB_USB_V2=m
 CONFIG_DVB_USB_AF9035=m
 CONFIG_DVB_USB_ANYSEE=m
@@ -3223,6 +3258,7 @@ CONFIG_DVB_USB_AZ6007=m
 CONFIG_DVB_USB_CE6230=m
 CONFIG_DVB_USB_EC168=m
 CONFIG_DVB_USB_GL861=m
+# CONFIG_DVB_USB_LME2510 is not set
 CONFIG_DVB_USB_MXL111SF=m
 CONFIG_DVB_USB_DVBSKY=m
 # CONFIG_DVB_USB_ZD1301 is not set
@@ -3238,6 +3274,7 @@ CONFIG_VIDEO_EM28XX=m
 CONFIG_VIDEO_EM28XX_V4L2=m
 CONFIG_VIDEO_EM28XX_ALSA=m
 CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_EM28XX_RC=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 # CONFIG_VIDEO_CADENCE is not set
 # CONFIG_VIDEO_MUX is not set
@@ -3292,12 +3329,14 @@ CONFIG_VIDEOBUF2_DMA_CONTIG=m
 CONFIG_VIDEOBUF2_VMALLOC=m
 CONFIG_DVB_B2C2_FLEXCOP=m
 CONFIG_SMS_SIANO_MDTV=m
+CONFIG_SMS_SIANO_RC=y
 
 #
 # Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
 #
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_MEDIA_ATTACH=y
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # I2C Encoders, decoders, sensors and other helper chips
@@ -4189,6 +4228,7 @@ CONFIG_HID_PICOLCD=m
 # CONFIG_HID_PICOLCD_BACKLIGHT is not set
 # CONFIG_HID_PICOLCD_LCD is not set
 # CONFIG_HID_PICOLCD_LEDS is not set
+# CONFIG_HID_PICOLCD_CIR is not set
 # CONFIG_HID_PLANTRONICS is not set
 # CONFIG_HID_PRIMAX is not set
 # CONFIG_HID_RETRODE is not set