Update for release 4.19.102.20200218

README.md

@@ -23,8 +23,8 @@ Each kernel release tarball currently provides the following files:
 * `/boot/config` (the configuration used to build the kernel);
 * `/boot/Module.symvers.xz` (a table mapping exported symbols to provider, compressed);
 * `/boot/System.map.xz` (the kernel's symbol table, compressed);
-* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `4.19.102.20200211` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
-* `/boot/overlays/...` (the device tree blob overlays) (from `4.19.102.20200211`);
+* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `4.19.102.20200218` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
+* `/boot/overlays/...` (the device tree blob overlays) (from `4.19.102.20200218`);
 * `/lib/modules/<kernel release name>/...` (the module set for the kernel);
 * `/lib/firmware/...` (the kernel-built firmware, for [< 4.14 only](http://lkml.iu.edu/hypermail/linux/kernel/1709.1/04650.html)).
 
@@ -36,7 +36,7 @@ The current kernel tarball may be downloaded from the link below (or via `wget`,
 
 Variant | Version | Most Recent Image
 :--- | ---: | ---:
-Kernel, dtbs, modules and (kernel) firmware | 4.19.102.20200211 | [bcmrpi3-kernel-4.19.102.20200211.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200211/bcmrpi3-kernel-4.19.102.20200211.tar.xz)
+Kernel, dtbs, modules and (kernel) firmware | 4.19.102.20200218 | [bcmrpi3-kernel-4.19.102.20200218.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200218/bcmrpi3-kernel-4.19.102.20200218.tar.xz)
 
 The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) may be viewed [here](https://github.com/sakaki-/bcmrpi3-kernel/blob/master/config).
 
@@ -47,8 +47,8 @@ The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) ma
 To deploy (assuming that your RPi3's micro SD-card's first partition is mounted as `/boot`, and you are already running a 64-bit RPi3 image, such as my [gentoo-on-rpi3-64bit](https://github.com/sakaki-/gentoo-on-rpi3-64bit)) simply download, untar into the root directory, and reboot:
 ```console
 pi64 ~ # cp /boot/kernel8.img{,.old}
-pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200211/bcmrpi3-kernel-4.19.102.20200211.tar.xz
-pi64 ~ # tar -xJf bcmrpi3-kernel-4.19.102.20200211.tar.xz -C /
+pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/4.19.102.20200218/bcmrpi3-kernel-4.19.102.20200218.tar.xz
+pi64 ~ # tar -xJf bcmrpi3-kernel-4.19.102.20200218.tar.xz -C /
 pi64 ~ # sync && reboot
 ```
 

config

@@ -19,7 +19,7 @@ CONFIG_THREAD_INFO_IN_TASK=y
 #
 CONFIG_INIT_ENV_ARG_LIMIT=32
 # CONFIG_COMPILE_TEST is not set
-CONFIG_LOCALVERSION="-v8-6567eca5d50c"
+CONFIG_LOCALVERSION="-v8-65cd47913443"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_BUILD_SALT=""
 CONFIG_DEFAULT_HOSTNAME="(none)"