From f502f1ab731ce9e136e9db3006dcf7eae55525ff Mon Sep 17 00:00:00 2001 From: Evgenii Vilkov Date: Fri, 30 Dec 2022 01:53:31 +0100 Subject: [PATCH] [Keyboard] Add Pica40 (#19220) Co-authored-by: Drashna Jaelre --- keyboards/pica40/info.json | 52 ++++++ keyboards/pica40/keymaps/default/keymap.c | 44 +++++ keyboards/pica40/keymaps/zzeneg/config.h | 12 ++ keyboards/pica40/keymaps/zzeneg/keymap.c | 196 ++++++++++++++++++++++ keyboards/pica40/keymaps/zzeneg/rules.mk | 2 + keyboards/pica40/readme.md | 29 ++++ keyboards/pica40/rev1/config.h | 9 + keyboards/pica40/rev1/info.json | 39 +++++ keyboards/pica40/rev1/rev1.c | 91 ++++++++++ keyboards/pica40/rev1/rev1.h | 6 + keyboards/pica40/rev1/rules.mk | 1 + keyboards/pica40/rev2/config.h | 19 +++ keyboards/pica40/rev2/info.json | 53 ++++++ keyboards/pica40/rev2/post_rules.mk | 8 + keyboards/pica40/rev2/rev2.c | 189 +++++++++++++++++++++ keyboards/pica40/rev2/rev2.h | 22 +++ keyboards/pica40/rev2/rules.mk | 2 + keyboards/pica40/rules.mk | 1 + 18 files changed, 775 insertions(+) create mode 100644 keyboards/pica40/info.json create mode 100644 keyboards/pica40/keymaps/default/keymap.c create mode 100644 keyboards/pica40/keymaps/zzeneg/config.h create mode 100644 keyboards/pica40/keymaps/zzeneg/keymap.c create mode 100644 keyboards/pica40/keymaps/zzeneg/rules.mk create mode 100644 keyboards/pica40/readme.md create mode 100644 keyboards/pica40/rev1/config.h create mode 100644 keyboards/pica40/rev1/info.json create mode 100644 keyboards/pica40/rev1/rev1.c create mode 100644 keyboards/pica40/rev1/rev1.h create mode 100644 keyboards/pica40/rev1/rules.mk create mode 100644 keyboards/pica40/rev2/config.h create mode 100644 keyboards/pica40/rev2/info.json create mode 100644 keyboards/pica40/rev2/post_rules.mk create mode 100644 keyboards/pica40/rev2/rev2.c create mode 100644 keyboards/pica40/rev2/rev2.h create mode 100644 keyboards/pica40/rev2/rules.mk create mode 100644 keyboards/pica40/rules.mk diff --git a/keyboards/pica40/info.json b/keyboards/pica40/info.json new file mode 100644 index 000000000000..6c9dbb76d937 --- /dev/null +++ b/keyboards/pica40/info.json @@ -0,0 +1,52 @@ +{ + "keyboard_name": "pica40", + "manufacturer": "zzeneg", + "url": "https://github.com/zzeneg/pica40", + "maintainer": "zzeneg", + "layouts": { + "LAYOUT": { + "layout": [ + { "matrix": [0, 0], "x": 1, "y": 0 }, + { "matrix": [0, 1], "x": 2, "y": 0 }, + { "matrix": [0, 2], "x": 3, "y": 0 }, + { "matrix": [0, 3], "x": 4, "y": 0 }, + { "matrix": [0, 4], "x": 5, "y": 0 }, + { "matrix": [4, 4], "x": 6, "y": 0 }, + { "matrix": [4, 3], "x": 7, "y": 0 }, + { "matrix": [4, 2], "x": 8, "y": 0 }, + { "matrix": [4, 1], "x": 9, "y": 0 }, + { "matrix": [4, 0], "x": 10, "y": 0 }, + { "matrix": [3, 0], "x": 0, "y": 1 }, + { "matrix": [1, 0], "x": 1, "y": 1 }, + { "matrix": [1, 1], "x": 2, "y": 1 }, + { "matrix": [1, 2], "x": 3, "y": 1 }, + { "matrix": [1, 3], "x": 4, "y": 1 }, + { "matrix": [1, 4], "x": 5, "y": 1 }, + { "matrix": [5, 4], "x": 6, "y": 1 }, + { "matrix": [5, 3], "x": 7, "y": 1 }, + { "matrix": [5, 2], "x": 8, "y": 1 }, + { "matrix": [5, 1], "x": 9, "y": 1 }, + { "matrix": [5, 0], "x": 10, "y": 1 }, + { "matrix": [7, 0], "x": 11, "y": 1 }, + { "matrix": [3, 1], "x": 0, "y": 2 }, + { "matrix": [2, 0], "x": 1, "y": 2 }, + { "matrix": [2, 1], "x": 2, "y": 2 }, + { "matrix": [2, 2], "x": 3, "y": 2 }, + { "matrix": [2, 3], "x": 4, "y": 2 }, + { "matrix": [2, 4], "x": 5, "y": 2 }, + { "matrix": [6, 4], "x": 6, "y": 2 }, + { "matrix": [6, 3], "x": 7, "y": 2 }, + { "matrix": [6, 2], "x": 8, "y": 2 }, + { "matrix": [6, 1], "x": 9, "y": 2 }, + { "matrix": [6, 0], "x": 10, "y": 2 }, + { "matrix": [7, 1], "x": 11, "y": 2 }, + { "matrix": [3, 2], "x": 3, "y": 3 }, + { "matrix": [3, 3], "x": 4, "y": 3 }, + { "matrix": [3, 4], "x": 5, "y": 3 }, + { "matrix": [7, 4], "x": 6, "y": 3 }, + { "matrix": [7, 3], "x": 7, "y": 3 }, + { "matrix": [7, 2], "x": 8, "y": 3 } + ] + } + } +} diff --git a/keyboards/pica40/keymaps/default/keymap.c b/keyboards/pica40/keymaps/default/keymap.c new file mode 100644 index 000000000000..010a29cceeb7 --- /dev/null +++ b/keyboards/pica40/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layer_number { + _QWERTY, + _LOWER, + _RAISE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* QWERTY + * .----------------------------------. ,----------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * .------+------+------+------+------+------| |------+------+------+------+------+------. + * | LCTRL| A | S | D | F | G | | H | J | K | L | ; | BSPC | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | LSFT | Z | X | C | V | B |-------. .-------| N | M | , | . | / | RSFT | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LALT | LOWER| / Space / \ Enter \ | RAISE| RGUI | + * `-------------' '-------' '-------' '-------------' + */ + [_QWERTY] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSPC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LALT, MO(_LOWER), KC_SPC, KC_ENT, MO(_RAISE), KC_RGUI + ), + + [_LOWER] = LAYOUT( + KC_ESC, KC_7, KC_8, KC_9, KC_0, KC_BSLS, KC_F7, KC_F8, KC_F9, KC_F12, + _______, KC_EQL, KC_4, KC_5, KC_6, KC_LBRC, KC_QUOT, KC_F4, KC_F5, KC_F6, KC_F11, _______, + _______, KC_MINS, KC_1, KC_2, KC_3, KC_RBRC, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F10, _______, + _______, _______, XXXXXXX, KC_MPLY, _______, _______ + ), + + [_RAISE] = LAYOUT( + KC_TAB, LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), LSFT(KC_BSLS), KC_DEL, KC_PGDN, KC_PGUP, KC_INS, + _______, LSFT(KC_EQL), LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_LBRC), LSFT(KC_QUOT), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, + _______, LSFT(KC_MINS), LSFT(KC_1), LSFT(KC_2), LSFT(KC_3), LSFT(KC_RBRC), LSFT(KC_GRV), KC_HOME, KC_END, XXXXXXX, XXXXXXX, _______, + _______, _______, KC_CAPS, XXXXXXX, _______, _______ + ), +}; diff --git a/keyboards/pica40/keymaps/zzeneg/config.h b/keyboards/pica40/keymaps/zzeneg/config.h new file mode 100644 index 000000000000..ec422c4d8e43 --- /dev/null +++ b/keyboards/pica40/keymaps/zzeneg/config.h @@ -0,0 +1,12 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD +#define TAPPING_FORCE_HOLD_PER_KEY +#define TAPPING_TERM 150 +#define TAPPING_TERM_PER_KEY + +#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD diff --git a/keyboards/pica40/keymaps/zzeneg/keymap.c b/keyboards/pica40/keymaps/zzeneg/keymap.c new file mode 100644 index 000000000000..6cff7cfa278f --- /dev/null +++ b/keyboards/pica40/keymaps/zzeneg/keymap.c @@ -0,0 +1,196 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layer_number { + _QWERTY = 0, + _GAME, + _NAV, + _NUMBER, + _SYMBOL, + _FUNC +}; + +// Left-hand home row mods +#define HOME_A LGUI_T(KC_A) +#define HOME_S LALT_T(KC_S) +#define HOME_D LCTL_T(KC_D) +#define HOME_F LSFT_T(KC_F) + +// Right-hand home row mods +#define HOME_J RSFT_T(KC_J) +#define HOME_K RCTL_T(KC_K) +#define HOME_L LALT_T(KC_L) +#define HOME_SCLN RGUI_T(KC_SCLN) + +// bottom mods +#define SYM_SPC LT(_SYMBOL, KC_SPC) +#define NUM_TAB LT(_NUMBER, KC_TAB) +#define FUNC_ESC LT(_FUNC, KC_ESC) +#define FUNC_ENT LT(_FUNC, KC_ENT) +#define NAV_BSPC LT(_NAV, KC_BSPC) +#define RALT_DEL RALT_T(KC_DEL) + +// game layer mods +#define LALT_EQL LALT_T(KC_EQL) +#define LSFT_MINS LSFT_T(KC_MINS) +#define LCTL_ESC LCTL_T(KC_ESC) +#define LGUI_QUOT LGUI_T(KC_QUOT) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* QWERTY + * .----------------------------------. ,----------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * .------+------+------+------+------+------| |------+------+------+------+------+------. + * | = | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | - | Z | X | C | V | B |-------. .-------| N | M | , | . | / | ` | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | Esc | Tab | / Space / \ Enter \ | Bsps | Del | + * |_FUNC | _NUM | /_SYMBOL/ \ _FUNC \ | _NAV | RAlt | + * `-------------''-------' '-------''-------------' + */ + [_QWERTY] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_EQL, HOME_A, HOME_S, HOME_D, HOME_F, KC_G, KC_H, HOME_J, HOME_K, HOME_L, HOME_SCLN, KC_QUOT, + KC_MINS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_GRV, + FUNC_ESC, NUM_TAB, SYM_SPC, FUNC_ENT, NAV_BSPC, RALT_DEL + ), + + [_GAME] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + LALT_EQL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LGUI_QUOT, + LSFT_MINS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_GAME), + LCTL_ESC, NUM_TAB, SYM_SPC, FUNC_ENT, NAV_BSPC, RALT_DEL + ), + + [_NAV] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, + XXXXXXX, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, LALT(KC_UP), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_INS, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LALT(KC_DOWN), KC_HOME, KC_END, KC_APP, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX + ), + + [_NUMBER] = LAYOUT( + KC_BSLS, KC_7, KC_8, KC_9, KC_0, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LCTL, KC_COMM, KC_4, KC_5, KC_6, KC_LBRC, XXXXXXX, KC_RSFT, KC_RCTL, KC_LALT, KC_RGUI, XXXXXXX, + KC_ENT, KC_DOT, KC_1, KC_2, KC_3, KC_RBRC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_BSPC, _______, TG(_GAME), XXXXXXX, XXXXXXX, XXXXXXX + ), + + [_SYMBOL] = LAYOUT( + LSFT(KC_BSLS), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LCTL, LSFT(KC_COMM), LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_LBRC), XXXXXXX, KC_RSFT, KC_RCTL, KC_LALT, KC_RGUI, XXXXXXX, + KC_ENT, LSFT(KC_DOT), LSFT(KC_1), LSFT(KC_2), LSFT(KC_3), LSFT(KC_RBRC), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_BSPC, _______, XXXXXXX, XXXXXXX, XXXXXXX + ), + + [_FUNC] = LAYOUT( + KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_LCTL, KC_F11, KC_F4, KC_F5, KC_F6, KC_PAUS, XXXXXXX, KC_RSFT, KC_RCTL, KC_LALT, KC_RGUI, XXXXXXX, + KC_DEL, KC_F10, KC_F1, KC_F2, KC_F3, KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, KC_MNXT, KC_MPLY, _______, XXXXXXX, XXXXXXX + ) +}; + +bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // allow multiple space, backspace, delete + case SYM_SPC: + case NAV_BSPC: + case RALT_DEL: + return false; + default: + return true; + } +} + +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + // different tapping term for different fingers + switch (keycode) { + // pinkies + case HOME_A: + case HOME_SCLN: + return TAPPING_TERM + 70; + // ring + case HOME_S: + case HOME_L: + return TAPPING_TERM + 40; + // middle + case HOME_D: + case HOME_K: + return TAPPING_TERM + 20; + // index and thumb + default: + return TAPPING_TERM; + } +} + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [_QWERTY] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [_GAME] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, + [_NAV] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [_NUMBER] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [_SYMBOL] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) }, + [_FUNC] = { ENCODER_CCW_CW(KC_MPRV, KC_MNXT) } +}; +#endif // ENCODER_MAP_ENABLE + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + +const rgblight_segment_t PROGMEM game_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 1, HSV_ORANGE}); +const rgblight_segment_t PROGMEM capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 1, HSV_PURPLE}); +const rgblight_segment_t PROGMEM capslockword_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 1, HSV_MAGENTA}); +const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(game_layer, capslock_layer, capslockword_layer); + +bool led_update_user(led_t led_state) { + rgblight_set_layer_state(1, led_state.caps_lock); + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + rgblight_set_layer_state(0, layer_state_cmp(state, _GAME)); + return state; +} + +void caps_word_set_user(bool active) { + rgblight_set_layer_state(2, active); +} + +void keyboard_post_init_user(void) { + rgblight_layers = rgb_layers; +} + +#endif // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + +#ifdef OLED_ENABLE + +void render_layer(void) { + switch (get_highest_layer(layer_state)) { + case _NUMBER: + oled_write_ln_P(PSTR("NMBR"), false); + break; + case _SYMBOL: + oled_write_ln_P(PSTR("SMBL"), false); + break; + case _NAV: + oled_write_ln_P(PSTR("NAV"), false); + break; + case _FUNC: + oled_write_ln_P(PSTR("FUNC"), false); + break; + default: + oled_write_ln_P(PSTR(" "), false); + break; + } +} + +bool oled_task_user(void) { + render_layer(); + return true; +} + +#endif // OLED_ENABLE + diff --git a/keyboards/pica40/keymaps/zzeneg/rules.mk b/keyboards/pica40/keymaps/zzeneg/rules.mk new file mode 100644 index 000000000000..afd8d2c6bf7a --- /dev/null +++ b/keyboards/pica40/keymaps/zzeneg/rules.mk @@ -0,0 +1,2 @@ +CAPS_WORD_ENABLE = yes +ENCODER_MAP_ENABLE = yes diff --git a/keyboards/pica40/readme.md b/keyboards/pica40/readme.md new file mode 100644 index 000000000000..c9efb58d92c0 --- /dev/null +++ b/keyboards/pica40/readme.md @@ -0,0 +1,29 @@ +# pica40 + +![pica40](https://i.imgur.com/CKImjAPh.jpg) + +A family of 40-key split ortholinear keyboards with rotary encoder. + +- Keyboard Maintainer: [zzeneg](https://github.com/zzeneg) +- Hardware Supported: Pica40 PCBs, Pro Micro (rev1), XIAO RP2040/nRF52840 (rev2) +- Hardware Availability: [GitHub](https://github.com/zzeneg/pica40) + +Make example for this keyboard (after setting up your build environment): + + make pica40:default + make pica40/rev1:default + +Flashing example for this keyboard: + + make pica40:default:flash + make pica40/rev1:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +- **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/pica40/rev1/config.h b/keyboards/pica40/rev1/config.h new file mode 100644 index 000000000000..09c481a9fffc --- /dev/null +++ b/keyboards/pica40/rev1/config.h @@ -0,0 +1,9 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#ifdef RGBLIGHT_ENABLE +# define RGBLIGHT_DISABLE_KEYCODES // disable keycodes for RGB Light controls, only status LED is supported +# define PICA40_RGBLIGHT_TIMEOUT 5 // turn RGB off after N minutes +#endif diff --git a/keyboards/pica40/rev1/info.json b/keyboards/pica40/rev1/info.json new file mode 100644 index 000000000000..8e4e64618de1 --- /dev/null +++ b/keyboards/pica40/rev1/info.json @@ -0,0 +1,39 @@ +{ + "processor": "atmega32u4", + "bootloader": "caterina", + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["D2", "B5", "B4", "E6", "D7"], + "rows": ["B1", "B3", "B2", "B6", "F4", "F5", "F6", "F7"] + }, + "features": { + "bootmagic": true, + "command": false, + "console": false, + "mousekey": true, + "extrakey": true, + "encoder": true, + "oled": true, + "rgblight": true, + "nkro": true + }, + "rgblight": { + "led_count": 1, + "pin": "D3", + "layers": { + "enabled": true, + "max": 3 + } + }, + "encoder": { + "rotary": [{ "pin_a": "C6", "pin_b": "D4" }] + }, + "usb": { + "device_version": "1.0.0", + "pid": "0x0841", + "vid": "0xFEED" + }, + "build": { + "lto": true + } +} diff --git a/keyboards/pica40/rev1/rev1.c b/keyboards/pica40/rev1/rev1.c new file mode 100644 index 000000000000..f008e4857a1d --- /dev/null +++ b/keyboards/pica40/rev1/rev1.c @@ -0,0 +1,91 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rev1.h" + +#ifdef PICA40_RGBLIGHT_TIMEOUT + +uint16_t check_rgblight_timer = 0; +uint16_t idle_timer = 0; +uint8_t counter = 0; + +void housekeeping_task_kb(void) { + if (timer_elapsed(check_rgblight_timer) > 1000) { + check_rgblight_timer = timer_read(); + + if (rgblight_is_enabled() && timer_elapsed(idle_timer) > 10000) { + idle_timer = timer_read(); + counter++; + } + + if (rgblight_is_enabled() && counter > PICA40_RGBLIGHT_TIMEOUT * 6) { + counter = 0; + rgblight_disable_noeeprom(); + } + } + + housekeeping_task_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed && timer_elapsed(idle_timer) > 1000) { + idle_timer = timer_read(); + counter = 0; + if (!rgblight_is_enabled()) { + rgblight_enable_noeeprom(); + } + } + + return process_record_user(keycode, record); +} + +void keyboard_post_init_kb(void) { + check_rgblight_timer = timer_read(); + idle_timer = timer_read(); + rgblight_enable_noeeprom(); + + keyboard_post_init_user(); +} + + +#endif // PICA40_RGBLIGHT_TIMEOUT + +#ifdef OLED_ENABLE + +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_270; +} + +void render_mods(uint8_t modifiers) { + oled_write_ln_P((modifiers & MOD_MASK_CTRL) ? PSTR("Ctrl") : PSTR(" "), false); + oled_write_ln_P((modifiers & MOD_MASK_ALT) ? PSTR("Alt") : PSTR(" "), false); + oled_write_ln_P((modifiers & MOD_MASK_SHIFT) ? PSTR("Shft") : PSTR(" "), false); + oled_write_ln_P((modifiers & MOD_MASK_GUI) ? PSTR("GUI") : PSTR(" "), false); +} + +bool oled_task_kb(void) { + // display's top is hidden by cover + oled_write_ln_P(PSTR(" "), false); + oled_write_ln_P(PSTR(" "), false); + oled_write_ln_P(PSTR(" "), false); + + if (!oled_task_user()) return false; + + render_mods(get_mods()); + + return true; +} + +#endif // OLED_ENABLE + +#ifdef ENCODER_ENABLE + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) return false; + + tap_code(clockwise ? KC_VOLU : KC_VOLD); + + return false; +} + +#endif // ENCODER_ENABLE diff --git a/keyboards/pica40/rev1/rev1.h b/keyboards/pica40/rev1/rev1.h new file mode 100644 index 000000000000..964038eefb4d --- /dev/null +++ b/keyboards/pica40/rev1/rev1.h @@ -0,0 +1,6 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" diff --git a/keyboards/pica40/rev1/rules.mk b/keyboards/pica40/rev1/rules.mk new file mode 100644 index 000000000000..2e3ef9fb844d --- /dev/null +++ b/keyboards/pica40/rev1/rules.mk @@ -0,0 +1 @@ +OLED_DRIVER = SSD1306 diff --git a/keyboards/pica40/rev2/config.h b/keyboards/pica40/rev2/config.h new file mode 100644 index 000000000000..1a59bee3ddea --- /dev/null +++ b/keyboards/pica40/rev2/config.h @@ -0,0 +1,19 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define SERIAL_USART_TX_PIN GP0 + +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U + +#ifdef RGBLIGHT_ENABLE +# define RGBLIGHT_DISABLE_KEYCODES // disable keycodes for RGB Light controls, only status LED is supported +# define PICA40_RGBLIGHT_TIMEOUT 5 // turn RGB off after N minutes +#endif + +#ifdef ENCODER_ENABLE +# define SPLIT_TRANSACTION_IDS_KB ENCODER_SYNC +#endif diff --git a/keyboards/pica40/rev2/info.json b/keyboards/pica40/rev2/info.json new file mode 100644 index 000000000000..99540900b944 --- /dev/null +++ b/keyboards/pica40/rev2/info.json @@ -0,0 +1,53 @@ +{ + "processor": "RP2040", + "bootloader": "rp2040", + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["GP26", "GP27", "GP28", "GP29", "GP6"], + "rows": ["GP3", "GP4", "GP2", "GP1"] + }, + "indicators": { + "num_lock": "GP17", + "caps_lock": "GP16", + "scroll_lock": "GP25", + "on_state": 0 + }, + "features": { + "bootmagic": true, + "command": false, + "console": false, + "mousekey": true, + "extrakey": true, + "encoder": true, + "rgblight": true, + "nkro": true + }, + "rgblight": { + "led_count": 1, + "pin": "GP12", + "split": true, + "layers": { + "enabled": true, + "max": 3 + } + }, + "split": { + "enabled": true, + "encoder": { + "right": { + "rotary": [] + } + } + }, + "encoder": { + "rotary": [{ "pin_a": "GP7", "pin_b": "GP7" }] + }, + "usb": { + "device_version": "1.0.0", + "pid": "0x0842", + "vid": "0xFEED" + }, + "build": { + "lto": true + } +} diff --git a/keyboards/pica40/rev2/post_rules.mk b/keyboards/pica40/rev2/post_rules.mk new file mode 100644 index 000000000000..e4dda1925baa --- /dev/null +++ b/keyboards/pica40/rev2/post_rules.mk @@ -0,0 +1,8 @@ +# if ENCODER_ENABLE is set, add defines but avoid adding encoder.c as it's replaced by custom code in rev2.c +ifeq ($(strip $(ENCODER_ENABLE)), yes) + ENCODER_ENABLE := no + OPT_DEFS += -DENCODER_ENABLE + ifeq ($(strip $(ENCODER_MAP_ENABLE)), yes) + OPT_DEFS += -DENCODER_MAP_ENABLE + endif +endif diff --git a/keyboards/pica40/rev2/rev2.c b/keyboards/pica40/rev2/rev2.c new file mode 100644 index 000000000000..c585ec56d665 --- /dev/null +++ b/keyboards/pica40/rev2/rev2.c @@ -0,0 +1,189 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rev2.h" + +#ifdef ENCODER_ENABLE // code based on encoder.c + +static const pin_t encoders_pad_a[] = ENCODERS_PAD_A; +static const pin_t encoders_pad_b[] = ENCODERS_PAD_B; + +static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0}; +static uint8_t encoder_state = 3; +static int8_t encoder_pulses = 0; +static uint8_t encoder_value = 0; + +typedef struct encoder_sync_data { + int value; +} encoder_sync_data; + +// custom handler that returns encoder B pin status from slave side +void encoder_sync_slave_handler(uint8_t in_buflen, const void *in_data, uint8_t out_buflen, void *out_data) { + encoder_sync_data *data = (encoder_sync_data *)out_data; + data->value = readPin(encoders_pad_b[0]); +} + +__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { + return true; +} + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) return false; + + tap_code(clockwise ? KC_VOLU : KC_VOLD); + + return false; +} + +#ifdef ENCODER_MAP_ENABLE +static void encoder_exec_mapping(uint8_t index, bool clockwise) { + action_exec(clockwise ? ENCODER_CW_EVENT(index, true) : ENCODER_CCW_EVENT(index, true)); + wait_ms(ENCODER_MAP_KEY_DELAY); + action_exec(clockwise ? ENCODER_CW_EVENT(index, false) : ENCODER_CCW_EVENT(index, false)); + wait_ms(ENCODER_MAP_KEY_DELAY); +} +#endif // ENCODER_MAP_ENABLE + +void encoder_init(void) { + setPinInputHigh(encoders_pad_a[0]); + setPinInputHigh(encoders_pad_b[0]); + wait_us(100); + transaction_register_rpc(ENCODER_SYNC, encoder_sync_slave_handler); +} + +bool encoder_read(void) { + // ignore if running on slave side + if (!is_keyboard_master()) return false; + + bool changed = false; + encoder_sync_data data = {0}; + // request pin B status from slave side + if (transaction_rpc_recv(ENCODER_SYNC, sizeof(data), &data)) { + uint8_t new_status = (readPin(encoders_pad_a[0]) << 0) | (data.value << 1); + if ((encoder_state & 0x3) != new_status) { + encoder_state <<= 2; + encoder_state |= new_status; + encoder_pulses += encoder_LUT[encoder_state & 0xF]; + + if (encoder_pulses >= ENCODER_RESOLUTION) { + encoder_value++; + changed = true; +#ifdef ENCODER_MAP_ENABLE + encoder_exec_mapping(0, false); +#else // ENCODER_MAP_ENABLE + encoder_update_kb(0, false); +#endif // ENCODER_MAP_ENABLE + } + + if (encoder_pulses <= -ENCODER_RESOLUTION) { + encoder_value--; + changed = true; +#ifdef ENCODER_MAP_ENABLE + encoder_exec_mapping(0, true); +#else // ENCODER_MAP_ENABLE + encoder_update_kb(0, true); +#endif // ENCODER_MAP_ENABLE + } + + encoder_pulses %= ENCODER_RESOLUTION; + } + } + return changed; +} + +// do not use standard split encoder transactions +void encoder_state_raw(uint8_t *slave_state) {} +void encoder_update_raw(uint8_t *slave_state) {} + +#endif // ENCODER_ENABLE + +#ifdef PICA40_RGBLIGHT_TIMEOUT +uint16_t check_rgblight_timer = 0; +uint16_t idle_timer = 0; +int8_t counter = 0; + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed && timer_elapsed(idle_timer) > 1000) { + idle_timer = timer_read(); + counter = 0; + if (!rgblight_is_enabled()) { + rgblight_enable_noeeprom(); + } + } + + return process_record_user(keycode, record); +} + +#endif // PICA40_RGBLIGHT_TIMEOUT + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) +uint16_t check_layer_timer = 0; +bool is_layer_active = false; +bool should_set_rgblight = false; +#endif // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + +void keyboard_post_init_kb(void) { + setPinOutput(PICA40_RGB_POWER_PIN); + +#ifdef PICA40_RGBLIGHT_TIMEOUT + idle_timer = timer_read(); + check_rgblight_timer = timer_read(); + rgblight_enable_noeeprom(); +#endif // RGBLIGHT_ENABLE + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + check_layer_timer = timer_read(); +#endif // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + + keyboard_post_init_user(); +} + +void housekeeping_task_kb(void) { +#ifdef PICA40_RGBLIGHT_TIMEOUT + if (is_keyboard_master()) { + if (timer_elapsed(check_rgblight_timer) > 1000) { + check_rgblight_timer = timer_read(); + + if (rgblight_is_enabled() && timer_elapsed(idle_timer) > 10000) { + idle_timer = timer_read(); + counter++; + } + + if (rgblight_is_enabled() && counter > PICA40_RGBLIGHT_TIMEOUT * 6) { + counter = 0; + rgblight_disable_noeeprom(); + } + } + } +#endif // PICA40_RGBLIGHT_TIMEOUT + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + if (timer_elapsed(check_layer_timer) > 100) { + check_layer_timer = timer_read(); + + if (should_set_rgblight) { + // set in the next housekeeping cycle after setting pin to avoid issues + rgblight_set(); + should_set_rgblight = false; + } + + bool current_is_layer_active = false; + for (uint8_t i = 0; i < RGBLIGHT_MAX_LAYERS; i++) { + current_is_layer_active = current_is_layer_active || rgblight_get_layer_state(i); + } + + if (is_layer_active != current_is_layer_active) { + is_layer_active = current_is_layer_active; + should_set_rgblight = true; + + if (is_layer_active) { + writePinHigh(PICA40_RGB_POWER_PIN); + } else { + writePinLow(PICA40_RGB_POWER_PIN); + } + } + } +#endif // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_LAYERS) + + housekeeping_task_user(); +} diff --git a/keyboards/pica40/rev2/rev2.h b/keyboards/pica40/rev2/rev2.h new file mode 100644 index 000000000000..473011fbb030 --- /dev/null +++ b/keyboards/pica40/rev2/rev2.h @@ -0,0 +1,22 @@ +// Copyright 2022 zzeneg (@zzeneg) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" +#include "gpio.h" + +// RGB LED support for XIAO RP2040 +#define PICA40_RGB_POWER_PIN GP11 + +// enable custom encoder functionality for Pica40 +#ifdef ENCODER_ENABLE +# include "encoder.h" +# include "transactions.h" +# ifndef ENCODER_MAP_KEY_DELAY +# define ENCODER_MAP_KEY_DELAY 2 +# endif +# ifndef ENCODER_RESOLUTION +# define ENCODER_RESOLUTION 4 +# endif +#endif diff --git a/keyboards/pica40/rev2/rules.mk b/keyboards/pica40/rev2/rules.mk new file mode 100644 index 000000000000..8fb51ec82d52 --- /dev/null +++ b/keyboards/pica40/rev2/rules.mk @@ -0,0 +1,2 @@ +SERIAL_DRIVER = vendor +WS2812_DRIVER = vendor diff --git a/keyboards/pica40/rules.mk b/keyboards/pica40/rules.mk new file mode 100644 index 000000000000..967088971285 --- /dev/null +++ b/keyboards/pica40/rules.mk @@ -0,0 +1 @@ +DEFAULT_FOLDER = pica40/rev2