Print binary sFlow feed to ASCII, or forward it to other collectors.
This tool receives sFlow data, and generates ASCII, JSON, CSV, tcpdump(1) or NetFlow(TM) output. Options are also available to forward the sFlow feed to additional collectors, or read packets from a capture file and forward as sFlow samples.
Please read the licence terms in ./COPYING.
- For more details on the sFlow data format, see: http://www.sflow.org
- For example switch and router configs see: https://github.com/sflow/config
- For freeware agent on Linux server see: https://github.com/sflow/host-sflow
- For scalable, real-time sFlow analytics see: https://sflow-rt.com
./boot.sh
./configure
make
sudo make install
(Start from ./configure if you downloaded a released version.)
If sFlow is arriving on port 6343, you can pretty-print the data like this:
% ./sflowtool -p 6343
or get a line-by-line output like this:
% ./sflowtool -p 6343 -l
or a custom line-by-line output by listing fields like this:
% ./sflowtool -p 6343 -L localtime,srcIP,dstIP
or a JSON representation like this:
% ./sflowtool -p 6343 -J
In a typical application, this output would be parsed by an awk or perl script, perhaps to extract MAC->IP address-mappings or to extract a particular counter for trending. The usage might then look more like this:
% ./sflowtool -p 6343 | my_perl_script.pl > output
Alternatively, you can show packet decodes like this:
% ./sflowtool -p 6343 -t | tcpdump -r -
To forward Cisco NetFlow v5 records to UDP port 9991 on host collector.mysite.com, the options would be:
% ./sflowtool -p 6343 -c collector.mysite.com -d 9991
If you compiled with -DSPOOFSOURCE, then you have the option of "spoofing" the IP source address of the netflow packets to match the IP address(es) of the original sflow agent(s)...
% ./sflowtool -p 6343 -c collector.mysite.com -d 9991 -S
To replicate the input sflow stream to several collectors, use the "-f host/port" option like this:
% ./sflowtool -p 6343 -f localhost/7777 -f localhost/7778 -f collector.mysite.com/6343
An example of the pretty-printed output is shown below. Note that every field can be parsed as two space-separated tokens (tag and value). Newlines separate one field from the next. The first field in a datagram is always the "unixSecondsUTC" field, and the first field in a flow or counters sample is always the "sampleSequenceNo" field. In this example, the datagram held two flow-samples and two counters-samples. Comments have been added in <<>> brackets. These are not found in the output.
unixSecondsUTC 991362247 <<this is always the first field of a new datagram>>
datagramVersion 2
agent 10.0.0.254 <<the sFlow agent>>
sysUpTime 10391000
packetSequenceNo 5219 <<the sequence number for datagrams from this agent>>
samplesInPacket 4
sampleSequenceNo 9466 <<the sequence number for the first sample - a flow sample from 0:0>>
sourceId 0:0
sampleType FLOWSAMPLE
meanSkipCount 10
samplePool 94660
dropEvents 0
inputPort 14
outputPort 16
packetDataTag INMPACKETTYPE_HEADER
headerProtocol 1
sampledPacketSize 1014
headerLen 128
headerBytes 00-50-04-29-1B-D9-00-D0-B7-23-B7-D8-08-00-45-00-03-E8-37-44-40-00-40-06-EB-C6-0A-00-00-01-0A-00-00-05-0D-F1-17-70-A2-4C-D2-AF-B1-F0-BF-01-80-18-7C-70-82-E0-00-00-01-01-08-0A-23-BC-42-93-01-A9-
dstMAC 005004291bd9 <<a rudimentary decode, which assumes an ethernet packet format>>
srcMAC 00d0b723b7d8
srcIP 10.0.0.1
dstIP 10.0.0.5
IPProtocol 6
TCPSrcPort 3569
TCPDstPort 6000
TCPFlags 24
extendedType ROUTER <<we have some layer3 forwarding information here too>>
nextHop 129.250.28.33
srcSubnetMask 24
dstSubnetMask 24
sampleSequenceNo 346 <<the next sample is a counters sample from 0:92>>
sourceId 0:92
sampleType COUNTERSSAMPLE
statsSamplingInterval 20
counterBlockVersion 1
ifIndex 92
networkType 53
ifSpeed 0
ifDirection 0
ifStatus 0
ifInOctets 18176791
ifInUcastPkts 92270
ifInMulticastPkts 0
ifInBroadcastPkts 100
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 40077590
ifOutUcastPkts 191170
ifOutMulticastPkts 1684
ifOutBroadcastPkts 674
ifOutDiscards 0
ifOutErrors 0
ifPromiscuousMode 0
sampleSequenceNo 9467 <<another flow sample from 0:0>>
sourceId 0:0
sampleType FLOWSAMPLE
meanSkipCount 10
samplePool 94670
dropEvents 0
inputPort 16
outputPort 14
packetDataTag INMPACKETTYPE_HEADER
headerProtocol 1
sampledPacketSize 66
headerLen 66
headerBytes 00-D0-B7-23-B7-D8-00-50-04-29-1B-D9-08-00-45-00-00-34-1E-D7-40-00-40-06-07-E8-0A-00-00-05-0A-00-00-01-17-70-0D-F1-B1-F0-BF-01-A2-4C-E3-A3-80-10-7C-70-E2-62-00-00-01-01-08-0A-01-A9-7F-A0-23-BC-
dstMAC 00d0b723b7d8
srcMAC 005004291bd9
srcIP 10.0.0.5
dstIP 10.0.0.1
IPProtocol 6
TCPSrcPort 6000
TCPDstPort 3569
TCPFlags 16
extendedType ROUTER
nextHop 129.250.28.33
srcSubnetMask 24
dstSubnetMask 24
sampleSequenceNo 346 <<and another counters sample, this time from 0:93>>
sourceId 0:93
sampleType COUNTERSSAMPLE
statsSamplingInterval 30
counterBlockVersion 1
ifIndex 93
networkType 53
ifSpeed 0
ifDirection 0
ifStatus 0
ifInOctets 103959
ifInUcastPkts 448
ifInMulticastPkts 81
ifInBroadcastPkts 93
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 196980
ifOutUcastPkts 460
ifOutMulticastPkts 599
ifOutBroadcastPkts 153
ifOutDiscards 0
ifOutErrors 0
ifPromiscuousMode 0
If your sFlow agent is running BGP, you may also see GATEWAY extendedType sections like this:
extendedType GATEWAY my_as 65001 src_as 0 src_peer_as 0 dst_as_path_len 3 dst_as_path 65000-2828-4908
The SWITCH, USER and URL extendedTypes may also appear. The SWITCH extendedType provides information on input and output VLANs and priorities. The USER extendedType provides information on the user-id that was allocated this IP address via a remote access session (e.g. RADIUS or TACAS). The URL field indicates for an HTTP flow what the original requested URL was for the flow. For more information, see the published sFlow documentation at http://www.sflow.org.
If you run sflowtool using the "-l" option then only one row of output will be generated for each flow or counter sample. It will look something like this:
[root@server src]# ./sflowtool -l
CNTR,10.0.0.254,17,6,100000000,0,2147483648,175283006,136405187,2578019,297011,0,3,0,0,0,0,0,0,0,1
FLOW,10.0.0.254,0,0,00902773db08,001083265e00,0x0800,0,0,10.0.0.1,10.0.0.254,17,0x00,64,35690,161,0x00,143,125,80
The counter samples are indicated with the "CNTR" entry in the first column. The second column is the agent address. The remaining columns are the fields from the generic counters structure (see SFLIf_counters in sflow.h).
The flow samples are indicated with the "FLOW" entry in the first column. The second column is the agent address. The remaining columns are:
inputPort
outputPort
src_MAC
dst_MAC
ethernet_type
in_vlan
out_vlan
src_IP
dst_IP
IP_protocol
ip_tos
ip_ttl
udp_src_port OR tcp_src_port OR icmp_type
udp_dst_port OR tcp_dst_port OR icmp_code
tcp_flags
packet_size
IP_size
sampling_rate
To request a custom line output, use the -L option, like this:
% sflowtool -L localtime,srcIP,dstIP
The "-g" option causes sflowtool to include contextual information on every line of output. The fields are:
agentIP
agentSubId
datasource_sequenceNo
datasource_class
datasource_index
sampletype_tag
elementtype_tag
For example, this makes it much easier to extract a particular counter for each agent, accumulate the deltas, and stream it to a time-series database.
The -J option prints human-readable JSON with a blank line between datagrams. To print more compact JSON with each datagram on one line, use -j instead.
Neil McKee (neil.mckee@inmon.com) InMon Corp. http://www.inmon.com