diff --git a/README.md b/README.md index d1bc518373..118712728c 100644 --- a/README.md +++ b/README.md @@ -130,7 +130,8 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | :green_heart: | STM32L452RE-P | [Nucleo L452RE-P](http://www.st.com/en/evaluation-tools/nucleo-l452re-p.html) | *1.8.0* | | | :green_heart: | STM32L476RG | [Nucleo L476RG](http://www.st.com/en/evaluation-tools/nucleo-l476rg.html) | *0.1.0* | | | :yellow_heart: | STM32WB15CCU | [Nucleo-WB15CC](https://www.st.com/en/evaluation-tools/nucleo-wb15cc.html) | **2.5.0** | | -| :green_heart: | STM32WB55RG
STM32WB55CG | [P-Nucleo-WB55RG](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html) | *1.6.0* | BLE support with [STM32duinoBLE](https://github.com/stm32duino/STM32duinoBLE) | +| :green_heart: | STM32WB55RG | [P-Nucleo-WB55RG](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html) | *1.6.0* | BLE support with [STM32duinoBLE](https://github.com/stm32duino/STM32duinoBLE) | +| :yellow_heart: | STM32WB55CG | [P-Nucleo-WB55 USB Dongle](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html) | **2.5.0** | BLE support with [STM32duinoBLE](https://github.com/stm32duino/STM32duinoBLE) | | :green_heart: | STM32WL55JC | [Nucleo WL55JC1](https://www.st.com/en/evaluation-tools/nucleo-wl55jc.html) | *2.1.0* | LoRa support not available | diff --git a/boards.txt b/boards.txt index c8f6b3d3d9..e1b0c08197 100644 --- a/boards.txt +++ b/boards.txt @@ -627,6 +627,20 @@ Nucleo_64.menu.pnum.P_NUCLEO_WB55RG.build.product_line=STM32WB55xx Nucleo_64.menu.pnum.P_NUCLEO_WB55RG.build.variant=STM32WBxx/WB55R(C-E-G)V Nucleo_64.menu.pnum.P_NUCLEO_WB55RG.build.cmsis_lib_gcc=arm_cortexM4lf_math +# P_NUCLEO_WB55 USB Dongle +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE=P-Nucleo WB55 USB Dongle +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.node="No_mass_storage_for_this_board_Use_STLink_upload_method" +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.upload.maximum_size=524288 +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.upload.maximum_data_size=196608 +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.mcu=cortex-m4 +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.fpu=-mfpu=fpv4-sp-d16 +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.float-abi=-mfloat-abi=hard +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.board=P_NUCLEO_WB55_USB_DONGLE +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.series=STM32WBxx +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.product_line=STM32WB55xx +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.variant=STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U +Nucleo_64.menu.pnum.P_NUCLEO_WB55_USB_DONGLE.build.cmsis_lib_gcc=arm_cortexM4lf_math + # NUCLEO_WL55JC1 board Nucleo_64.menu.pnum.NUCLEO_WL55JC1=Nucleo WL55JC1 Nucleo_64.menu.pnum.NUCLEO_WL55JC1.node="NOD_WL55JC" diff --git a/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.cpp b/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.cpp new file mode 100644 index 0000000000..7a1ff4272c --- /dev/null +++ b/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.cpp @@ -0,0 +1,149 @@ +/* + ******************************************************************************* + * Copyright (c) 2023, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_P_NUCLEO_WB55_USB_DONGLE) +#include "pins_arduino.h" +#include "lock_resource.h" + +// Digital PinName array +const PinName digitalPin[] = { + // CN1 + PA_13, + PA_14, + PB_3, + PB_2, + PA_5, + PA_6, + PA_7, + // CN2 + PB_8, + PB_9, + PA_0, + PA_2, + PA_3, + PB_6, + PA_9, + PA_8, + PA_1, + PB_7, + // Specific + PC_14, + PC_15, + PH_3, + PA_4, + PB_0, + PB_1, + PA_10, + PA_11, + PA_12 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 4, // A0 + 5, // A1 + 6, // A2 + 9, // A3 + 10, // A4 + 11, // A5 + 13, // A6 + 14, // A7 + 15 // A8 +}; + +// ---------------------------------------------------------------------------- +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {}; + + /* This prevents concurrent access to RCC registers by CPU2 (M0+) */ + hsem_lock(CFG_HW_RCC_SEMID, HSEM_LOCK_DEFAULT_RETRY); + + /* Macro to configure the PLL multiplication factor */ + __HAL_RCC_PLL_PLLM_CONFIG(RCC_PLLM_DIV2); + + /* Macro to configure the PLL clock source */ + __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE); + + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMHIGH); + /* Configure the main internal regulator output voltage */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* This prevents the CPU2 (M0+) to disable the HSI48 oscillator */ + hsem_lock(CFG_HW_CLK48_CONFIG_SEMID, HSEM_LOCK_DEFAULT_RETRY); + + /* Initializes the CPU, AHB and APB busses clocks */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI + | RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + + /* Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4 | RCC_CLOCKTYPE_HCLK2 + | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + + /* Initializes the peripherals clocks */ + /* RNG needs to be configured like in M0 core, i.e. with HSI48 */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS | RCC_PERIPHCLK_RFWAKEUP + | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_USB; + PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_LSE; + PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_HSI48; + PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSE; + PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + Error_Handler(); + } + + LL_PWR_SMPS_SetStartupCurrent(LL_PWR_SMPS_STARTUP_CURRENT_80MA); + LL_PWR_SMPS_SetOutputVoltageLevel(LL_PWR_SMPS_OUTPUT_VOLTAGE_1V40); + LL_PWR_SMPS_Enable(); + + /* Select HSI as system clock source after Wake Up from Stop mode */ + LL_RCC_SetClkAfterWakeFromStop(LL_RCC_STOP_WAKEUPCLOCK_HSI); + + hsem_unlock(CFG_HW_RCC_SEMID); +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_P_NUCLEO_WB55_USB_DONGLE* */ diff --git a/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.h b/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.h new file mode 100644 index 0000000000..997a44d9f2 --- /dev/null +++ b/variants/STM32WBxx/WB35C(C-E)UxA_WB55C(C-E-G)U/variant_P_NUCLEO_WB55_USB_DONGLE.h @@ -0,0 +1,166 @@ +/* + ******************************************************************************* + * Copyright (c) 2023, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +// CN1 +#define PA13 0 // SWDIO +#define PA14 1 // SWCLK +#define PB3 2 // SWO +#define PB2 3 // SPI1 NSS +#define PA5 PIN_A0 // SPI1 SCK +#define PA6 PIN_A1 // SPI1 MISO +#define PA7 PIN_A2 // SPI1 MOSI +// CN2 +#define PB8 7 // I2C1 SCL +#define PB9 8 // I2C1 SDA +#define PA0 PIN_A3 // WKUP +#define PA2 PIN_A4 // LPUART1 TX +#define PA3 PIN_A5 // LPUART1 RX +#define PB6 12 +#define PA9 PIN_A6 // SB2 close/SB6 open (default) +#define PA8 PIN_A7 +#define PA1 PIN_A8 +// Same position than PA9 on CN2 +#define PB7 16 // SB2 open/SB6 close +// Specific +#define PC14 17 // OSC32-IN +#define PC15 18 // OSC32-OUT +#define PH3 19 // BOOT0 +#define PA4 20 // LED1 BLUE +#define PB0 21 // LED2 GREEN +#define PB1 22 // LED3 RED +#define PA10 23 // USER_BTN +#define PA11 24 // USB_DM +#define PA12 25 // USB_DP + +// Not connected +// PA15 +// PB4 +// PB5 +// PE4 + +// Alternate pins number +#define PA7_ALT1 (PA7 | ALT1) +#define PB8_ALT1 (PB8 | ALT1) +#define PB9_ALT1 (PB9 | ALT1) + +#define NUM_DIGITAL_PINS 26 +#define NUM_ANALOG_INPUTS 9 + +// On-board LED pin number +#define LED1 PA4 +#define LED2 PB0 +#define LED3 PB1 +#ifndef LED_BUILTIN + #define LED_BUILTIN LED1 +#endif +#define LED_BLUE LED1 +#define LED_GREEN LED2 +#define LED_RED LED3 + +// On-board user button +// Note: use '_BTN' for SW1 as it is a register name of M24SR64-Y +#define SW1_BTN PA10 +#ifndef USER_BTN + #define USER_BTN SW1_BTN +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PB2 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PB6 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PA8 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PB9 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PB8 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM17 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 101 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + +// Extra HAL modules +#if !defined(HAL_QSPI_MODULE_DISABLED) + #define HAL_QSPI_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif