From 608b0aa7bcbb62444d4c75751d5be5e96d71cf43 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:35 +0100 Subject: [PATCH 01/23] system(C0) add STM32C0xx HAL Drivers to v1.0.1 Included in STM32CubeC0 FW 1.0.1 Signed-off-by: Frederic Pillon --- .../Inc/Legacy/stm32_hal_legacy.h | 3982 +++++++++ .../Inc/stm32_assert_template.h | 53 + .../STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h | 582 ++ .../Inc/stm32c0xx_hal_adc.h | 1723 ++++ .../Inc/stm32c0xx_hal_adc_ex.h | 185 + .../Inc/stm32c0xx_hal_conf_template.h | 270 + .../Inc/stm32c0xx_hal_cortex.h | 365 + .../Inc/stm32c0xx_hal_crc.h | 342 + .../Inc/stm32c0xx_hal_crc_ex.h | 150 + .../Inc/stm32c0xx_hal_def.h | 197 + .../Inc/stm32c0xx_hal_dma.h | 570 ++ .../Inc/stm32c0xx_hal_dma_ex.h | 262 + .../Inc/stm32c0xx_hal_exti.h | 309 + .../Inc/stm32c0xx_hal_flash.h | 788 ++ .../Inc/stm32c0xx_hal_flash_ex.h | 116 + .../Inc/stm32c0xx_hal_gpio.h | 349 + .../Inc/stm32c0xx_hal_gpio_ex.h | 331 + .../Inc/stm32c0xx_hal_i2c.h | 835 ++ .../Inc/stm32c0xx_hal_i2c_ex.h | 173 + .../Inc/stm32c0xx_hal_i2s.h | 553 ++ .../Inc/stm32c0xx_hal_irda.h | 890 ++ .../Inc/stm32c0xx_hal_irda_ex.h | 176 + .../Inc/stm32c0xx_hal_iwdg.h | 237 + .../Inc/stm32c0xx_hal_pwr.h | 273 + .../Inc/stm32c0xx_hal_pwr_ex.h | 188 + .../Inc/stm32c0xx_hal_rcc.h | 1731 ++++ .../Inc/stm32c0xx_hal_rcc_ex.h | 384 + .../Inc/stm32c0xx_hal_rtc.h | 899 ++ .../Inc/stm32c0xx_hal_rtc_ex.h | 493 + .../Inc/stm32c0xx_hal_smartcard.h | 1172 +++ .../Inc/stm32c0xx_hal_smartcard_ex.h | 335 + .../Inc/stm32c0xx_hal_smbus.h | 789 ++ .../Inc/stm32c0xx_hal_smbus_ex.h | 150 + .../Inc/stm32c0xx_hal_spi.h | 850 ++ .../Inc/stm32c0xx_hal_spi_ex.h | 72 + .../Inc/stm32c0xx_hal_tim.h | 2415 +++++ .../Inc/stm32c0xx_hal_tim_ex.h | 373 + .../Inc/stm32c0xx_hal_uart.h | 1693 ++++ .../Inc/stm32c0xx_hal_uart_ex.h | 337 + .../Inc/stm32c0xx_hal_usart.h | 945 ++ .../Inc/stm32c0xx_hal_usart_ex.h | 281 + .../Inc/stm32c0xx_hal_wwdg.h | 306 + .../Inc/stm32c0xx_ll_adc.h | 5165 +++++++++++ .../Inc/stm32c0xx_ll_bus.h | 830 ++ .../Inc/stm32c0xx_ll_cortex.h | 588 ++ .../Inc/stm32c0xx_ll_crc.h | 461 + .../Inc/stm32c0xx_ll_dma.h | 1528 ++++ .../Inc/stm32c0xx_ll_dmamux.h | 1170 +++ .../Inc/stm32c0xx_ll_exti.h | 1067 +++ .../Inc/stm32c0xx_ll_gpio.h | 989 +++ .../Inc/stm32c0xx_ll_i2c.h | 2272 +++++ .../Inc/stm32c0xx_ll_iwdg.h | 338 + .../Inc/stm32c0xx_ll_pwr.h | 949 ++ .../Inc/stm32c0xx_ll_rcc.h | 1794 ++++ .../Inc/stm32c0xx_ll_rtc.h | 2457 +++++ .../Inc/stm32c0xx_ll_spi.h | 2283 +++++ .../Inc/stm32c0xx_ll_system.h | 1175 +++ .../Inc/stm32c0xx_ll_tim.h | 4996 +++++++++++ .../Inc/stm32c0xx_ll_usart.h | 4400 +++++++++ .../Inc/stm32c0xx_ll_utils.h | 265 + .../Inc/stm32c0xx_ll_wwdg.h | 328 + .../Drivers/STM32C0xx_HAL_Driver/LICENSE.md | 27 + .../Drivers/STM32C0xx_HAL_Driver/LICENSE.txt | 6 + system/Drivers/STM32C0xx_HAL_Driver/README.md | 39 + .../STM32C0xx_HAL_Driver/Release_Notes.html | 111 + .../STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c | 633 ++ .../Src/stm32c0xx_hal_adc.c | 3004 +++++++ .../Src/stm32c0xx_hal_adc_ex.c | 392 + .../Src/stm32c0xx_hal_cortex.c | 423 + .../Src/stm32c0xx_hal_crc.c | 516 ++ .../Src/stm32c0xx_hal_crc_ex.c | 223 + .../Src/stm32c0xx_hal_dma.c | 1079 +++ .../Src/stm32c0xx_hal_dma_ex.c | 298 + .../Src/stm32c0xx_hal_exti.c | 667 ++ .../Src/stm32c0xx_hal_flash.c | 699 ++ .../Src/stm32c0xx_hal_flash_ex.c | 866 ++ .../Src/stm32c0xx_hal_gpio.c | 557 ++ .../Src/stm32c0xx_hal_i2c.c | 6884 ++++++++++++++ .../Src/stm32c0xx_hal_i2c_ex.c | 356 + .../Src/stm32c0xx_hal_i2s.c | 1857 ++++ .../Src/stm32c0xx_hal_irda.c | 3010 +++++++ .../Src/stm32c0xx_hal_iwdg.c | 283 + .../Src/stm32c0xx_hal_msp_template.c | 107 + .../Src/stm32c0xx_hal_pwr.c | 433 + .../Src/stm32c0xx_hal_pwr_ex.c | 492 + .../Src/stm32c0xx_hal_rcc.c | 1134 +++ .../Src/stm32c0xx_hal_rcc_ex.c | 486 + .../Src/stm32c0xx_hal_rtc.c | 1527 ++++ .../Src/stm32c0xx_hal_rtc_ex.c | 834 ++ .../Src/stm32c0xx_hal_smartcard.c | 3182 +++++++ .../Src/stm32c0xx_hal_smartcard_ex.c | 494 ++ .../Src/stm32c0xx_hal_smbus.c | 2779 ++++++ .../Src/stm32c0xx_hal_smbus_ex.c | 242 + .../Src/stm32c0xx_hal_spi.c | 4435 +++++++++ .../Src/stm32c0xx_hal_spi_ex.c | 112 + .../Src/stm32c0xx_hal_tim.c | 7895 +++++++++++++++++ .../Src/stm32c0xx_hal_tim_ex.c | 2764 ++++++ ...tm32c0xx_hal_timebase_rtc_alarm_template.c | 295 + .../Src/stm32c0xx_hal_timebase_tim_template.c | 176 + .../Src/stm32c0xx_hal_uart.c | 4612 ++++++++++ .../Src/stm32c0xx_hal_uart_ex.c | 1065 +++ .../Src/stm32c0xx_hal_usart.c | 3844 ++++++++ .../Src/stm32c0xx_hal_usart_ex.c | 540 ++ .../Src/stm32c0xx_hal_wwdg.c | 420 + .../Src/stm32c0xx_ll_adc.c | 751 ++ .../Src/stm32c0xx_ll_crc.c | 103 + .../Src/stm32c0xx_ll_dma.c | 296 + .../Src/stm32c0xx_ll_exti.c | 212 + .../Src/stm32c0xx_ll_gpio.c | 260 + .../Src/stm32c0xx_ll_i2c.c | 215 + .../Src/stm32c0xx_ll_pwr.c | 82 + .../Src/stm32c0xx_ll_rcc.c | 438 + .../Src/stm32c0xx_ll_rtc.c | 706 ++ .../Src/stm32c0xx_ll_spi.c | 522 ++ .../Src/stm32c0xx_ll_tim.c | 1335 +++ .../Src/stm32c0xx_ll_usart.c | 380 + .../Src/stm32c0xx_ll_utils.c | 275 + .../_htmresc/Add button.svg | 2 + .../STM32C0xx_HAL_Driver/_htmresc/Update.svg | 2 + .../STM32C0xx_HAL_Driver/_htmresc/favicon.png | Bin 0 -> 4126 bytes .../STM32C0xx_HAL_Driver/_htmresc/mini-st.css | 1700 ++++ .../_htmresc/mini-st_2020.css | 1711 ++++ .../STM32C0xx_HAL_Driver/_htmresc/st_logo.png | Bin 0 -> 18616 bytes .../_htmresc/st_logo_2020.png | Bin 0 -> 7520 bytes .../Drivers/STM32YYxx_HAL_Driver_version.md | 1 + 125 files changed, 128968 insertions(+) create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32_assert_template.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_conf_template.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_cortex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_def.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_exti.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2s.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_iwdg.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart_ex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_wwdg.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_adc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_bus.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_cortex.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_crc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dma.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dmamux.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_exti.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_gpio.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_i2c.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_iwdg.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_pwr.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rcc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rtc.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_spi.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_system.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_tim.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_usart.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_utils.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_wwdg.h create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/LICENSE.md create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/LICENSE.txt create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/README.md create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Release_Notes.html create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_cortex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_exti.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_gpio.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2s.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_irda.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_iwdg.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_msp_template.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_rtc_alarm_template.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_tim_template.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart_ex.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_wwdg.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_adc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_crc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_dma.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_exti.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_gpio.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_i2c.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_pwr.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rcc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rtc.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_spi.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_tim.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_usart.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_utils.c create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Add button.svg create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Update.svg create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/favicon.png create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st.css create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st_2020.css create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo.png create mode 100644 system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo_2020.png diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000000..a5d20a8fd6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,3982 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32U5) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF +#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */ +#endif +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) || defined(STM32C0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +#if defined(STM32U5) || defined(STM32MP2) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ + )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#endif + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || defined (STM32C0) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32_assert_template.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32_assert_template.h new file mode 100644 index 0000000000..8efa2dbc22 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32_assert_template.h @@ -0,0 +1,53 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @author MCD Application Team + * @brief STM32 assert template file. + * This file should be copied to the application folder and renamed + * to stm32_assert.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_ASSERT_H +#define STM32_ASSERT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_ASSERT_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h new file mode 100644 index 0000000000..525836c40c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h @@ -0,0 +1,582 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_H +#define STM32C0xx_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_system.h" +#include "stm32c0xx_hal_conf.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ + +#define HAL_TICK_FREQ_10HZ 100U +#define HAL_TICK_FREQ_100HZ 10U +#define HAL_TICK_FREQ_1KHZ 1U +#define HAL_TICK_FREQ_DEFAULT HAL_TICK_FREQ_1KHZ + +/** + * @} + */ + +/** @defgroup HAL_BIND Bind Pin config + * @{ + */ + +#if (DEV_ID == 0x443UL) +#define HAL_BIND_SO8_PIN1_PB7 LL_PINMUX_SO8_PIN1_PB7 /*!< STM32C011 SO8 package, Pin1 assigned to GPIO PB7 */ +#define HAL_BIND_SO8_PIN1_PC14 LL_PINMUX_SO8_PIN1_PC14 /*!< STM32C011 SO8 package, Pin1 assigned to GPIO PC14 */ +#define HAL_BIND_SO8_PIN4_PF2 LL_PINMUX_SO8_PIN4_PF2 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PF2 */ +#define HAL_BIND_SO8_PIN4_PA0 LL_PINMUX_SO8_PIN4_PA0 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA0 */ +#define HAL_BIND_SO8_PIN4_PA1 LL_PINMUX_SO8_PIN4_PA1 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA1 */ +#define HAL_BIND_SO8_PIN4_PA2 LL_PINMUX_SO8_PIN4_PA2 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA2 */ +#define HAL_BIND_SO8_PIN5_PA8 LL_PINMUX_SO8_PIN5_PA8 /*!< STM32C011 SO8 package, Pin5 assigned to GPIO PA8*/ +#define HAL_BIND_SO8_PIN5_PA11 LL_PINMUX_SO8_PIN5_PA11 /*!< STM32C011 SO8 package, Pin5 assigned to GPIO PA11 */ +#define HAL_BIND_SO8_PIN8_PA14 LL_PINMUX_SO8_PIN8_PA14 /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PA14 */ +#define HAL_BIND_SO8_PIN8_PB6 LL_PINMUX_SO8_PIN8_PB6 /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PB6 */ +#define HAL_BIND_SO8_PIN8_PC15 LL_PINMUX_SO8_PIN8_PC15 /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PC15 */ +#define HAL_BIND_WLCSP12_PINE2_PA7 LL_PINMUX_WLCSP12_PINE2_PA7 /*!< STM32C011 WLCSP12 package, PinE2 assigned to GPIO PA7 */ +#define HAL_BIND_WLCSP12_PINE2_PA12 LL_PINMUX_WLCSP12_PINE2_PA12 /*!< STM32C011 WLCSP12 package, PinE2 assigned to GPIO PA12*/ +#define HAL_BIND_WLCSP12_PINF1_PA3 LL_PINMUX_WLCSP12_PINF1_PA3 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA3 */ +#define HAL_BIND_WLCSP12_PINF1_PA4 LL_PINMUX_WLCSP12_PINF1_PA4 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA4 */ +#define HAL_BIND_WLCSP12_PINF1_PA5 LL_PINMUX_WLCSP12_PINF1_PA5 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA5 */ +#define HAL_BIND_WLCSP12_PINF1_PA6 LL_PINMUX_WLCSP12_PINF1_PA6 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA6 */ +#elif (DEV_ID == 0x453UL) +#define HAL_BIND_WLCSP14_PINF2_PA1 LL_PINMUX_WLCSP14_PINF2_PA1 /*!< STM32C031 WLCSP14 package, PinF2 assigned to GPIO PA1 */ +#define HAL_BIND_WLCSP14_PINF2_PA2 LL_PINMUX_WLCSP14_PINF2_PA2 /*!< STM32C031 WLCSP14 package, PinF2 assigned to GPIO PA2 */ +#define HAL_BIND_WLCSP14_PING3_PF2 LL_PINMUX_WLCSP14_PING3_PF2 /*!< STM32C031 WLCSP14 package, PinG3 assigned to GPIO PF2 */ +#define HAL_BIND_WLCSP14_PING3_PA0 LL_PINMUX_WLCSP14_PING3_PA0 /*!< STM32C031 WLCSP14 package, PinG3 assigned to GPIO PA0 */ +#define HAL_BIND_WLCSP14_PINJ1_PA8 LL_PINMUX_WLCSP14_PINJ1_PA8 /*!< STM32C031 WLCSP14 package, PinJ1 assigned to GPIO PA8 */ +#define HAL_BIND_WLCSP14_PINJ1_PA11 LL_PINMUX_WLCSP14_PINJ1_PA11 /*!< STM32C031 WLCSP14 package, PinJ1 assigned to GPIO PA11 */ +#define HAL_BIND_WLCSP14_PINH2_PA5 LL_PINMUX_WLCSP14_PINH2_PA5 /*!< STM32C031 WLCSP14 package, PinH2 assigned to GPIO PA5 */ +#define HAL_BIND_WLCSP14_PINH2_PA6 LL_PINMUX_WLCSP14_PINH2_PA6 /*!< STM32C031 WLCSP14 package, PinH2 assigned to GPIO PA6 */ +#define HAL_BIND_WLCSP14_PING1_PA7 LL_PINMUX_WLCSP14_PING1_PA7 /*!< STM32C031 WLCSP14 package, PinG1 assigned to GPIO PA7 */ +#define HAL_BIND_WLCSP14_PING1_PA12 LL_PINMUX_WLCSP14_PING1_PA12 /*!< STM32C031 WLCSP14 package, PinG1 assigned to GPIO PA12 */ +#define HAL_BIND_WLCSP14_PINJ3_PA3 LL_PINMUX_WLCSP14_PINJ3_PA3 /*!< STM32C031 WLCSP14 package, PinJ3 assigned to GPIO PA3 */ +#define HAL_BIND_WLCSP14_PINJ3_PA4 LL_PINMUX_WLCSP14_PINJ3_PA4 /*!< STM32C031 WLCSP14 package, PinJ3 assigned to GPIO PA4 */ +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0x00000000U /*!< Main Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x0000 0000 */ +#define SYSCFG_BOOT_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x0000 0000 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Break Break + * @{ + */ +#define SYSCFG_BREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM0+ with Break Input of TIM1/16/17 */ +/** + * @} + */ + +/** @defgroup HAL_Pin_remapping Pin remapping + * @{ + */ +#define SYSCFG_REMAP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves digitally as PA9 GPIO pin */ +#define SYSCFG_REMAP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves digitally as PA10 GPIO pin */ +/** + * @} + */ + +/** @defgroup HAL_IR_ENV_SEL IR Modulation Envelope signal selection + * @{ + */ +#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IR Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IR Modulation envelope source */ +#define HAL_SYSCFG_IRDA_ENV_SEL_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IR Modulation envelope source */ + +/** + * @} + */ + +/** @defgroup HAL_IR_POL_SEL IR output polarity selection + * @{ + */ +#define HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED 0x00000000U /*!< 00: IR output polarity not inverted */ +#define HAL_SYSCFG_IRDA_POLARITY_INVERTED SYSCFG_CFGR1_IR_POL /*!< 01: IR output polarity inverted */ + +/** + * @} + */ +/** @defgroup SYSCFG_FastModePlus_GPIO Fast mode Plus on GPIO + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast mode Plus on PB9 */ +#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast mode Plus on PA9 */ +#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast mode Plus on PA10 */ +#define SYSCFG_FASTMODEPLUS_PC14 SYSCFG_CFGR1_I2C_PC14_FMP /*!< Enable Fast mode Plus on PC14 */ +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_I2Cx Fast mode Plus driving capability activation for I2Cx + * @{ + */ + +/** @brief Fast mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast mode Plus on I2C1 */ + +/** + * @} + */ + +/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper + * @brief ISR Wrapper + * @{ + */ +#define HAL_SYSCFG_ITLINE0 0x00000000U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE2 0x00000002U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE3 0x00000003U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE4 0x00000004U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE5 0x00000005U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE6 0x00000006U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE7 0x00000007U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE9 0x00000009U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE10 0x0000000AU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE11 0x0000000BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE12 0x0000000CU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE13 0x0000000DU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE14 0x0000000EU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE16 0x00000010U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE19 0x00000013U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE21 0x00000015U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE22 0x00000016U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE23 0x00000017U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE25 0x00000019U /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE27 0x0000001BU /*!< Internal define for macro handling */ +#define HAL_SYSCFG_ITLINE28 0x0000001CU /*!< Internal define for macro handling */ + +#define HAL_ITLINE_WWDG ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_WWDG) /*!< WWDG Interrupt */ +#define HAL_ITLINE_RTC ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC) /*!< RTC Interrupt */ +#define HAL_ITLINE_FLASH_ITF ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF) /*!< Flash ITF Interrupt */ +#define HAL_ITLINE_CLK_CTRL ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL) /*!< CLK Control Interrupt */ +#define HAL_ITLINE_EXTI0 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0) /*!< External Interrupt 0 */ +#define HAL_ITLINE_EXTI1 ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1) /*!< External Interrupt 1 */ +#define HAL_ITLINE_EXTI2 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2) /*!< External Interrupt 2 */ +#define HAL_ITLINE_EXTI3 ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3) /*!< External Interrupt 3 */ +#define HAL_ITLINE_EXTI4 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4) /*!< EXTI4 Interrupt */ +#define HAL_ITLINE_EXTI5 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5) /*!< EXTI5 Interrupt */ +#define HAL_ITLINE_EXTI6 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6) /*!< EXTI6 Interrupt */ +#define HAL_ITLINE_EXTI7 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7) /*!< EXTI7 Interrupt */ +#define HAL_ITLINE_EXTI8 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8) /*!< EXTI8 Interrupt */ +#define HAL_ITLINE_EXTI9 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9) /*!< EXTI9 Interrupt */ +#define HAL_ITLINE_EXTI10 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10) /*!< EXTI10 Interrupt */ +#define HAL_ITLINE_EXTI11 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11) /*!< EXTI11 Interrupt */ +#define HAL_ITLINE_EXTI12 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12) /*!< EXTI12 Interrupt */ +#define HAL_ITLINE_EXTI13 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13) /*!< EXTI13 Interrupt */ +#define HAL_ITLINE_EXTI14 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14) /*!< EXTI14 Interrupt */ +#define HAL_ITLINE_EXTI15 ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15) /*!< EXTI15 Interrupt */ +#define HAL_ITLINE_DMA1_CH1 ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1) /*!< DMA1 Channel 1 Interrupt */ +#define HAL_ITLINE_DMA1_CH2 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2) /*!< DMA1 Channel 2 Interrupt */ +#define HAL_ITLINE_DMA1_CH3 ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3) /*!< DMA1 Channel 3 Interrupt */ +#define HAL_ITLINE_DMAMUX ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMAMUX) /*!< DMAMUX Interrupt */ +#define HAL_ITLINE_ADC ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC) /*!< ADC Interrupt */ +#define HAL_ITLINE_TIM1_BRK ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK) /*!< TIM1 BRK Interrupt */ +#define HAL_ITLINE_TIM1_UPD ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD) /*!< TIM1 UPD Interrupt */ +#define HAL_ITLINE_TIM1_TRG ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG) /*!< TIM1 TRG Interrupt */ +#define HAL_ITLINE_TIM1_CCU ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU) /*!< TIM1 CCU Interrupt */ +#define HAL_ITLINE_TIM3 ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB) /*!< TIM3 Interrupt */ +#define HAL_ITLINE_TIM14 ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB) /*!< TIM14 Interrupt */ +#define HAL_ITLINE_TIM16 ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB) /*!< TIM16 Interrupt */ +#define HAL_ITLINE_TIM17 ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB) /*!< TIM17 Interrupt */ +#define HAL_ITLINE_I2C1 ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB) /*!< I2C1 Interrupt */ +#define HAL_ITLINE_SPI1 ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1) /*!< SPI1 Interrupt */ +#define HAL_ITLINE_USART1 ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB) /*!< USART1 GLB Interrupt */ +#define HAL_ITLINE_USART2 ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB) /*!< USART2 GLB Interrupt */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze and Unfreeze Peripherals in Debug mode + */ + +#if defined(DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_TIM3_STOP) +#endif + +#if defined(DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_RTC_STOP) +#endif + +#if defined(DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_WWDG_STOP) +#endif + +#if defined(DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_IWDG_STOP) +#endif + +#if defined(DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBG->APBFZ1, DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP) +#endif + +#if defined(DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM1_STOP) +#endif + +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM14_STOP) +#endif + +#if defined(DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM16_STOP) +#endif + +#if defined(DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBG->APBFZ2, DBG_APB_FZ2_DBG_TIM17_STOP) +#endif + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** + * @brief ISR wrapper check + * @note Allow to determine interrupt source per line. + */ +#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF)) + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() \ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, (SYSCFG_CFGR1_MEM_MODE_1|SYSCFG_CFGR1_MEM_MODE_0)) + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values @ref SYSCFG_BootMode + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief SYSCFG Break Cortex-M0+ Lockup lock. + * Enables and locks the connection of Cortex-M0+ LOCKUP (Hardfault) output to TIM1/16/17 Break input + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0U) + + +/** @brief selection of the modulation envelope signal macro, using bits [7:6] of SYSCFG_CFGR1 register + * @param __SOURCE__ This parameter can be a value of @ref HAL_IR_ENV_SEL + */ +#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD);\ + SET_BIT(SYSCFG->CFGR1, (__SOURCE__));\ + }while(0U) + +#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0U) + +/** @brief IROut Polarity Selection, using bit[5] of SYSCFG_CFGR1 register + * @param __SEL__ This parameter can be a value of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_IRDA_OUT_POLARITY_SELECTION(__SEL__) do { assert_param(IS_HAL_SYSCFG_IRDA_POL_SEL((__SEL__)));\ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL);\ + SET_BIT(SYSCFG->CFGR1,(__SEL__));\ + }while(0U) + +/** + * @brief Return the IROut Polarity mode as configured by user. + * @retval The IROut polarity as configured by user. The returned value can be one + * of @ref HAL_IR_POL_SEL + */ +#define __HAL_SYSCFG_GET_POLARITY() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL) + +/** @brief Break input to TIM1/16/17 capability enable/disable macros + * @param __BREAK__ This parameter can be a value of @ref SYSCFG_Break + */ +#define __HAL_SYSCFG_BREAK_ENABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + SET_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) + +#define __HAL_SYSCFG_BREAK_DISABLE(__BREAK__) do {assert_param(IS_SYSCFG_BREAK_CONFIG((__BREAK__)));\ + CLEAR_BIT(SYSCFG->CFGR2, (__BREAK__));\ + }while(0U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ + +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) ((__CONFIG__) == SYSCFG_BREAK_LOCKUP) + +#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \ + ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART2)) + +#define IS_HAL_SYSCFG_IRDA_POL_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_POLARITY_NOT_INVERTED) || \ + ((SEL) == HAL_SYSCFG_IRDA_POLARITY_INVERTED)) + + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PC14) == SYSCFG_FASTMODEPLUS_PC14) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +#define IS_HAL_REMAP_PIN(RMP) (((RMP) == SYSCFG_REMAP_PA11) || \ + ((RMP) == SYSCFG_REMAP_PA12) || \ + ((RMP) == (SYSCFG_REMAP_PA11 | SYSCFG_REMAP_PA12))) +#if (DEV_ID == 0x443UL) +#define IS_HAL_SYSCFG_PINBINDING(PIN) (((PIN) == HAL_BIND_SO8_PIN1_PB7) || \ + ((PIN) == HAL_BIND_SO8_PIN1_PC14) || \ + ((PIN) == HAL_BIND_SO8_PIN4_PF2) || \ + ((PIN) == HAL_BIND_SO8_PIN4_PA0) || \ + ((PIN) == HAL_BIND_SO8_PIN4_PA1) || \ + ((PIN) == HAL_BIND_SO8_PIN4_PA2) || \ + ((PIN) == HAL_BIND_SO8_PIN5_PA8) || \ + ((PIN) == HAL_BIND_SO8_PIN5_PA11) || \ + ((PIN) == HAL_BIND_SO8_PIN8_PA14) || \ + ((PIN) == HAL_BIND_SO8_PIN8_PB6) || \ + ((PIN) == HAL_BIND_SO8_PIN8_PC15) || \ + ((PIN) == HAL_BIND_WLCSP12_PINE2_PA7) || \ + ((PIN) == HAL_BIND_WLCSP12_PINE2_PA12) || \ + ((PIN) == HAL_BIND_WLCSP12_PINF1_PA3) || \ + ((PIN) == HAL_BIND_WLCSP12_PINF1_PA4) || \ + ((PIN) == HAL_BIND_WLCSP12_PINF1_PA5) || \ + ((PIN) == HAL_BIND_WLCSP12_PINF1_PA6)) +#elif (DEV_ID == 0x453UL) +#define IS_HAL_SYSCFG_PINBINDING(PIN) (((PIN) == HAL_BIND_WLCSP14_PINF2_PA1) || \ + ((PIN) == HAL_BIND_WLCSP14_PINF2_PA2) || \ + ((PIN) == HAL_BIND_WLCSP14_PING3_PF2) || \ + ((PIN) == HAL_BIND_WLCSP14_PING3_PA0) || \ + ((PIN) == HAL_BIND_WLCSP14_PINJ1_PA8) || \ + ((PIN) == HAL_BIND_WLCSP14_PINJ1_PA11) || \ + ((PIN) == HAL_BIND_WLCSP14_PINH2_PA5) || \ + ((PIN) == HAL_BIND_WLCSP14_PINH2_PA6) || \ + ((PIN) == HAL_BIND_WLCSP14_PING1_PA7) || \ + ((PIN) == HAL_BIND_WLCSP14_PING1_PA12)|| \ + ((PIN) == HAL_BIND_WLCSP14_PINJ3_PA3) || \ + ((PIN) == HAL_BIND_WLCSP14_PINJ3_PA4)) +#endif +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions + * @{ + */ + +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq); +uint32_t HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern uint32_t uwTickFreq; +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap); +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap); +void HAL_SYSCFG_SetPinBinding(uint32_t pin_binding); +uint32_t HAL_SYSCFG_GetPinBinding(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc.h new file mode 100644 index 0000000000..b501f7ec1c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc.h @@ -0,0 +1,1723 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_adc.h + * @author MCD Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_ADC_H +#define STM32C0xx_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/* Include low level driver */ +#include "stm32c0xx_ll_adc.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief ADC group regular oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ + + uint32_t TriggeredMode; /*!< Selects the regular triggered oversampling mode. + This parameter can be a value of @ref ADC_HAL_EC_OVS_DISCONT_MODE */ + +} ADC_OversamplingTypeDef; + +/** + * @brief Structure definition of ADC instance and ADC group regular. + * @note Parameters of this structure are shared within 2 scopes: + * - Scope entire ADC (differentiation done for compatibility with some other STM32 series featuring ADC groups regular and injected): ClockPrescaler, Resolution, DataAlign, + * ScanConvMode, EOCSelection, LowPowerAutoWait. + * - Scope ADC group regular: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, + * ExternalTrigConv, ExternalTrigConvEdge, DMAContinuousRequests, Overrun, OversamplingMode, Oversampling. + * @note The setting of these parameters by function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled + * - For all parameters except 'ClockPrescaler' and 'Resolution': ADC enabled without conversion on going on group regular. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter + * (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from system clock or PLL (Refer to reference manual for list of clocks available)) and clock prescaler. + This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. + Note: The ADC clock configuration is common to all ADC instances. + Note: In case of synchronous clock mode based on HCLK/1, the configuration must be enabled only + if the system clock has a 50% duty clock cycle (APB prescaler configured inside RCC + must be bypassed and PCLK clock must have 50% duty cycle). Refer to reference manual for details. + Note: In case of usage of asynchronous clock, the selected clock must be preliminarily enabled at RCC top level. + Note: This parameter can be modified only if all ADC instances are disabled. */ + + uint32_t Resolution; /*!< Configure the ADC resolution. + This parameter can be a value of @ref ADC_HAL_EC_RESOLUTION */ + + uint32_t DataAlign; /*!< Specify ADC data alignment in conversion data register (right or left). + Refer to reference manual for alignments formats versus resolutions. + This parameter can be a value of @ref ADC_HAL_EC_DATA_ALIGN */ + + uint32_t ScanConvMode; /*!< Configure the sequencer of ADC group regular. + On this STM32 series, ADC group regular sequencer both modes "fully configurable" or "not fully configurable" are + available: + - sequencer configured to fully configurable: + sequencer length and each rank affectation to a channel are configurable. + - Sequence length: Set number of ranks in the scan sequence. + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from rank 1 to rank n). + - sequencer configured to not fully configurable: + sequencer length and each rank affectation to a channel are fixed by channel HW number. + - Sequence length: Number of ranks in the scan sequence is + defined by number of channels set in the sequence, + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + - Sequence direction: Unless specified in parameters, sequencer + scan direction is forward (from lowest channel number to + highest channel number). + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices): + If only 1 channel is set: Conversion is performed in single mode. + If several channels are set: Conversions are performed in sequence mode. + This parameter can be a value of @ref ADC_Scan_mode */ + + uint32_t EOCSelection; /*!< Specify which EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of unitary conversion or end of sequence conversions. + This parameter can be a value of @ref ADC_EOCSelection. */ + + FunctionalState LowPowerAutoWait; /*!< Select the dynamic low power Auto Delay: new conversion start only when the previous + conversion (for ADC group regular) has been retrieved by user software, + using function HAL_ADC_GetValue(). + This feature automatically adapts the frequency of ADC conversions triggers to the speed of the system that reads the data. Moreover, this avoids risk of overrun + for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended benefit (except specific case of high load of CPU or DMA transfers which can justify usage of auto wait). + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when ADC conversion data is needed: + use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start. */ + + FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. + Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ + + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular, + after the first ADC conversion start trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t NbrOfConversion; /*!< Specify the number of ranks that will be converted within the regular group sequencer. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Number of ranks in the scan sequence is configurable using this parameter. + Note: After the first call of 'HAL_ADC_Init()', each rank corresponding to parameter "NbrOfConversion" must be set using 'HAL_ADC_ConfigChannel()'. + Afterwards, when all needed sequencer ranks are set, parameter 'NbrOfConversion' can be updated without modifying configuration of sequencer ranks + (sequencer ranks above 'NbrOfConversion' are discarded). + - sequencer configured to not fully configurable: + Number of ranks in the scan sequence is defined by number of channels set in the sequence. This parameter is discarded. + This parameter must be a number between Min_Data = 1 and Max_Data = 8. + Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). */ + + FunctionalState DiscontinuousConvMode; /*!< Specify whether the conversions sequence of ADC group regular is performed in Complete-sequence/Discontinuous-sequence + (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE. + Note: On this STM32 series, ADC group regular number of discontinuous ranks increment is fixed to one-by-one. */ + + uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion start. + If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger is used instead. + This parameter can be a value of @ref ADC_regular_external_trigger_source. + Caution: external trigger source is common to all ADC instances. */ + + uint32_t ExternalTrigConvEdge; /*!< Select the external event edge used to trigger ADC group regular conversion start. + If trigger source is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_regular_external_trigger_edge */ + + FunctionalState DMAContinuousRequests; /*!< Specify whether the DMA requests are performed in one shot mode (DMA transfer stops when number of conversions is reached) + or in continuous mode (DMA transfer unlimited, whatever number of conversions). + This parameter can be set to ENABLE or DISABLE. + Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. */ + + uint32_t Overrun; /*!< Select the behavior in case of overrun: data overwritten or preserved (default). + This parameter can be a value of @ref ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR. + Note: In case of overrun set to data preserved and usage with programming model with interruption (HAL_Start_IT()): ADC IRQ handler has to clear + end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved in function + HAL_ADC_ConvCpltCallback(), placed in user program code (called before end of conversion flags clear). + Note: Error reporting with respect to the conversion mode: + - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data + overwritten, user can willingly not read all the converted data, this is not considered as an erroneous case. + - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register). */ + + uint32_t SamplingTimeCommon1; /*!< Set sampling time common to a group of channels. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + uint32_t SamplingTimeCommon2; /*!< Set sampling time common to a group of channels, second common setting possible. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is ongoing on ADC group regular. */ + + ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */ + + uint32_t TriggerFrequencyMode; /*!< Set ADC trigger frequency mode. + This parameter can be a value of @ref ADC_HAL_EC_REG_TRIGGER_FREQ. + Note: ADC trigger frequency mode must be set to low frequency when + a duration is exceeded before ADC conversion start trigger event + (between ADC enable and ADC conversion start trigger event + or between two ADC conversion start trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". + Note: When ADC trigger frequency mode is set to low frequency, + some rearm cycles are inserted before performing ADC conversion + start, inducing a delay of 2 ADC clock cycles. */ + +} ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters by function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled or enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) + * on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */ + + uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer and specify its conversion rank. + This parameter is dependent on ScanConvMode: + - sequencer configured to fully configurable: + Channels ordering into each rank of scan sequence: + whatever channel can be placed into whatever rank. + - sequencer configured to not fully configurable: + rank of each channel is fixed by channel HW number. + (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer. + This parameter can be a value of @ref ADC_HAL_EC_REG_SEQ_RANKS */ + + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_SAMPLINGTIME_COMMON + Note: On this STM32 family, two different sampling time settings are available (refer to parameters "SamplingTimeCommon1" and "SamplingTimeCommon2"), each channel can use one of these two settings. + + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values. */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters by function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters except 'HighThreshold', 'LowThreshold': ADC disabled or ADC enabled without conversion on going on ADC groups regular. + * - For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular. + */ +typedef struct +{ + uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. + For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode') + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel) + This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ + + uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. + For Analog Watchdog 1: Configure the ADC analog watchdog mode: single channel or all channels, ADC group regular. + For Analog Watchdog 2 and 3: Several channels can be monitored by applying successively the AWD init structure. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + + uint32_t Channel; /*!< Select which ADC channel to monitor by analog watchdog. + For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel (only 1 channel can be monitored). + For Analog Watchdog 2 and 3: Several channels can be monitored. To use this feature, call successively the function HAL_ADC_AnalogWDGConfig() for each channel to be added (or removed with value 'ADC_ANALOGWATCHDOG_NONE'). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL. */ + + FunctionalState ITMode; /*!< Specify whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + + uint32_t HighThreshold; /*!< Configure the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ + + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog Low threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits + the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. + Note: If ADC oversampling is enabled, ADC analog watchdog thresholds are + impacted: the comparison of analog watchdog thresholds is done on + oversampling final computation (after ratio and shift application): + ADC data register bitfield [15:4] (12 most significant bits). */ +} ADC_AnalogWDGConfTypeDef; + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready for use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy due to an internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC group regular */ +#define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is ongoing or can occur (either by continuous mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */ +#define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group regular */ +#define HAL_ADC_STATE_REG_OVR (0x00000400UL) /*!< Overrun occurrence */ +#define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: End Of Sampling flag raised */ + +/* States of ADC group injected */ +#define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< Not available on this STM32 series: A conversion on group injected is ongoing or can occur (either by auto-injection mode, + external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available))*/ +#define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Not available on this STM32 series: Conversion data available on group injected */ +#define HAL_ADC_STATE_INJ_JQOVF (0x00004000UL) /*!< Not available on this STM32 series: Injected queue overflow occurrence */ + +/* States of ADC analog watchdogs */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog 1 */ +#define HAL_ADC_STATE_AWD2 (0x00020000UL) /*!< Not available on this STM32 series: Out-of-window occurrence of ADC analog watchdog 2 */ +#define HAL_ADC_STATE_AWD3 (0x00040000UL) /*!< Not available on this STM32 series: Out-of-window occurrence of ADC analog watchdog 3 */ + +/* States of ADC multi-mode */ +#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000UL) /*!< Not available on this STM32 series: ADC in multimode slave state, controlled by another ADC master (when feature available) */ + + +/** + * @} + */ + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< ADC initialization parameters and regular conversions setting */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + + uint32_t ADCGroupRegularSequencerRanks; /*!< ADC group regular sequencer memorization of ranks setting, used in mode "fully configurable" (refer to parameter 'ScanConvMode') */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* LevelOutOfWindow2Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 2 callback */ + void (* LevelOutOfWindow3Callback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 3 callback */ + void (* EndOfSamplingCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC end of sampling callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} ADC_HandleTypeDef; + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID = 0x06U, /*!< ADC analog watchdog 2 callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID = 0x07U, /*!< ADC analog watchdog 3 callback ID */ + HAL_ADC_END_OF_SAMPLING_CB_ID = 0x08U, /*!< ADC end of sampling callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC peripheral internal error (problem of clocking, + enable/disable, erroneous state, ...) */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define ADC_CLOCK_SYNC_PCLK_DIV1 (LL_ADC_CLOCK_SYNC_PCLK_DIV1) /*!< ADC synchronous clock derived from AHB clock without prescaler. This configuration must be enabled only if PCLK has a 50% duty clock cycle (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle) */ +#define ADC_CLOCK_SYNC_PCLK_DIV2 (LL_ADC_CLOCK_SYNC_PCLK_DIV2) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 (LL_ADC_CLOCK_SYNC_PCLK_DIV4) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */ + +#define ADC_CLOCK_ASYNC_DIV1 (LL_ADC_CLOCK_ASYNC_DIV1) /*!< ADC asynchronous clock without prescaler */ +#define ADC_CLOCK_ASYNC_DIV2 (LL_ADC_CLOCK_ASYNC_DIV2) /*!< ADC asynchronous clock with prescaler division by 2 */ +#define ADC_CLOCK_ASYNC_DIV4 (LL_ADC_CLOCK_ASYNC_DIV4) /*!< ADC asynchronous clock with prescaler division by 4 */ +#define ADC_CLOCK_ASYNC_DIV6 (LL_ADC_CLOCK_ASYNC_DIV6) /*!< ADC asynchronous clock with prescaler division by 6 */ +#define ADC_CLOCK_ASYNC_DIV8 (LL_ADC_CLOCK_ASYNC_DIV8) /*!< ADC asynchronous clock with prescaler division by 8 */ +#define ADC_CLOCK_ASYNC_DIV10 (LL_ADC_CLOCK_ASYNC_DIV10) /*!< ADC asynchronous clock with prescaler division by 10 */ +#define ADC_CLOCK_ASYNC_DIV12 (LL_ADC_CLOCK_ASYNC_DIV12) /*!< ADC asynchronous clock with prescaler division by 12 */ +#define ADC_CLOCK_ASYNC_DIV16 (LL_ADC_CLOCK_ASYNC_DIV16) /*!< ADC asynchronous clock with prescaler division by 16 */ +#define ADC_CLOCK_ASYNC_DIV32 (LL_ADC_CLOCK_ASYNC_DIV32) /*!< ADC asynchronous clock with prescaler division by 32 */ +#define ADC_CLOCK_ASYNC_DIV64 (LL_ADC_CLOCK_ASYNC_DIV64) /*!< ADC asynchronous clock with prescaler division by 64 */ +#define ADC_CLOCK_ASYNC_DIV128 (LL_ADC_CLOCK_ASYNC_DIV128) /*!< ADC asynchronous clock with prescaler division by 128 */ +#define ADC_CLOCK_ASYNC_DIV256 (LL_ADC_CLOCK_ASYNC_DIV256) /*!< ADC asynchronous clock with prescaler division by 256 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define ADC_RESOLUTION_12B (LL_ADC_RESOLUTION_12B) /*!< ADC resolution 12 bits */ +#define ADC_RESOLUTION_10B (LL_ADC_RESOLUTION_10B) /*!< ADC resolution 10 bits */ +#define ADC_RESOLUTION_8B (LL_ADC_RESOLUTION_8B) /*!< ADC resolution 8 bits */ +#define ADC_RESOLUTION_6B (LL_ADC_RESOLUTION_6B) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment + * @{ + */ +#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC sequencer scan mode + * @{ + */ +/* Note: On this STM32 family, ADC group regular sequencer both modes */ +/* "fully configurable" or "not fully configurable" are */ +/* available. */ +/* Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE (0x00000000UL) */ +/* ADC_SCAN_ENABLE (0x00000001UL) */ +/* Sequencer fully configurable with only rank 1 enabled is considered */ +/* as default setting equivalent to scan enable. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Sequencer set to fully configurable: only the rank 1 is enabled (no scan sequence on several ranks) */ +#define ADC_SCAN_ENABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer set to fully configurable: sequencer length and each rank affectation to a channel are configurable. */ + +#define ADC_SCAN_SEQ_FIXED (ADC_SCAN_SEQ_FIXED_INT) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_SEQ_FIXED_BACKWARD (ADC_SCAN_SEQ_FIXED_INT | ADC_CFGR1_SCANDIR) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_DIRECTION_FORWARD (ADC_SCAN_SEQ_FIXED) /* For compatibility with other STM32 devices */ +#define ADC_SCAN_DIRECTION_BACKWARD (ADC_SCAN_SEQ_FIXED_BACKWARD) /* For compatibility with other STM32 devices */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_source ADC group regular trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion trigger internal: SW start. */ +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#if defined(TIM2) +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#if defined(TIM4) +#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM6) +#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#if defined(TIM15) +#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#endif +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_regular_external_trigger_edge ADC group regular trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000UL) /*!< Regular conversions hardware trigger detection disabled */ +#define ADC_EXTERNALTRIGCONVEDGE_RISING (LL_ADC_REG_TRIG_EXT_RISING) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define ADC_EXTERNALTRIGCONVEDGE_FALLING (LL_ADC_REG_TRIG_EXT_FALLING) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING (LL_ADC_REG_TRIG_EXT_RISINGFALLING) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC sequencer end of unitary conversion or sequence conversions + * @{ + */ +#define ADC_EOC_SINGLE_CONV (ADC_ISR_EOC) /*!< End of unitary conversion flag */ +#define ADC_EOC_SEQ_CONV (ADC_ISR_EOS) /*!< End of sequence conversions flag */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define ADC_OVR_DATA_PRESERVED (LL_ADC_REG_OVR_DATA_PRESERVED) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define ADC_OVR_DATA_OVERWRITTEN (LL_ADC_REG_OVR_DATA_OVERWRITTEN) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define ADC_RANK_CHANNEL_NUMBER (0x00000001U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ +#define ADC_RANK_NONE (0x00000002U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Disable the selected rank (selected channel) from sequencer */ + +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define ADC_SAMPLINGTIME_COMMON_1 (LL_ADC_SAMPLINGTIME_COMMON_1) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define ADC_SAMPLINGTIME_COMMON_2 (LL_ADC_SAMPLINGTIME_COMMON_2) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 (LL_ADC_SAMPLINGTIME_1CYCLE_5) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_3CYCLES_5 (LL_ADC_SAMPLINGTIME_3CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles */ +#define ADC_SAMPLETIME_7CYCLES_5 (LL_ADC_SAMPLINGTIME_7CYCLES_5) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_19CYCLES_5 (LL_ADC_SAMPLINGTIME_19CYCLES_5) /*!< Sampling time 19.5 ADC clock cycles */ +#define ADC_SAMPLETIME_39CYCLES_5 (LL_ADC_SAMPLINGTIME_39CYCLES_5) /*!< Sampling time 39.5 ADC clock cycles */ +#define ADC_SAMPLETIME_79CYCLES_5 (LL_ADC_SAMPLINGTIME_79CYCLES_5) /*!< Sampling time 79.5 ADC clock cycles */ +#define ADC_SAMPLETIME_160CYCLES_5 (LL_ADC_SAMPLINGTIME_160CYCLES_5) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define ADC_CHANNEL_0 (LL_ADC_CHANNEL_0) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define ADC_CHANNEL_1 (LL_ADC_CHANNEL_1) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define ADC_CHANNEL_2 (LL_ADC_CHANNEL_2) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define ADC_CHANNEL_3 (LL_ADC_CHANNEL_3) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define ADC_CHANNEL_4 (LL_ADC_CHANNEL_4) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define ADC_CHANNEL_5 (LL_ADC_CHANNEL_5) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define ADC_CHANNEL_6 (LL_ADC_CHANNEL_6) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define ADC_CHANNEL_7 (LL_ADC_CHANNEL_7) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define ADC_CHANNEL_8 (LL_ADC_CHANNEL_8) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define ADC_CHANNEL_9 (LL_ADC_CHANNEL_9) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define ADC_CHANNEL_10 (LL_ADC_CHANNEL_10) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define ADC_CHANNEL_11 (LL_ADC_CHANNEL_11) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define ADC_CHANNEL_12 (LL_ADC_CHANNEL_12) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define ADC_CHANNEL_13 (LL_ADC_CHANNEL_13) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define ADC_CHANNEL_14 (LL_ADC_CHANNEL_14) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define ADC_CHANNEL_15 (LL_ADC_CHANNEL_15) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define ADC_CHANNEL_16 (LL_ADC_CHANNEL_16) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define ADC_CHANNEL_17 (LL_ADC_CHANNEL_17) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define ADC_CHANNEL_18 (LL_ADC_CHANNEL_18) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define ADC_CHANNEL_19 (LL_ADC_CHANNEL_19) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN19 */ +#define ADC_CHANNEL_20 (LL_ADC_CHANNEL_20) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN20 */ +#define ADC_CHANNEL_21 (LL_ADC_CHANNEL_21) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN21 */ +#define ADC_CHANNEL_22 (LL_ADC_CHANNEL_22) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN22 */ +#define ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_VREFINT) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< ADC internal channel connected to Temperature sensor. */ +#define ADC_CHANNEL_VDDA (LL_ADC_CHANNEL_VDDA) /*!< ADC internal channel connected to VDDA */ +#define ADC_CHANNEL_VSSA (LL_ADC_CHANNEL_VSSA) /*!< ADC internal channel connected to VSSA */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ +#define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC Analog Watchdog Mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE (0x00000000UL) /*!< No analog watchdog selected */ +#define ADC_ANALOGWATCHDOG_SINGLE_REG (ADC_CFGR1_AWD1SGL | ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to a regular group single channel */ +#define ADC_ANALOGWATCHDOG_ALL_REG (ADC_CFGR1_AWD1EN) /*!< Analog watchdog applied to regular group all channels */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define ADC_OVERSAMPLING_RATIO_2 (LL_ADC_OVS_RATIO_2) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_4 (LL_ADC_OVS_RATIO_4) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_8 (LL_ADC_OVS_RATIO_8) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_16 (LL_ADC_OVS_RATIO_16) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_32 (LL_ADC_OVS_RATIO_32) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_64 (LL_ADC_OVS_RATIO_64) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_128 (LL_ADC_OVS_RATIO_128) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define ADC_OVERSAMPLING_RATIO_256 (LL_ADC_OVS_RATIO_256) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define ADC_RIGHTBITSHIFT_NONE (LL_ADC_OVS_SHIFT_NONE) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_1 (LL_ADC_OVS_SHIFT_RIGHT_1) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_2 (LL_ADC_OVS_SHIFT_RIGHT_2) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_3 (LL_ADC_OVS_SHIFT_RIGHT_3) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_4 (LL_ADC_OVS_SHIFT_RIGHT_4) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_5 (LL_ADC_OVS_SHIFT_RIGHT_5) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_6 (LL_ADC_OVS_SHIFT_RIGHT_6) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_7 (LL_ADC_OVS_SHIFT_RIGHT_7) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define ADC_RIGHTBITSHIFT_8 (LL_ADC_OVS_SHIFT_RIGHT_8) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define ADC_TRIGGEREDMODE_SINGLE_TRIGGER (LL_ADC_OVS_REG_CONT) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define ADC_TRIGGEREDMODE_MULTI_TRIGGER (LL_ADC_OVS_REG_DISCONT) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define ADC_TRIGGER_FREQ_HIGH (LL_ADC_TRIGGER_FREQ_HIGH) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define ADC_TRIGGER_FREQ_LOW (LL_ADC_TRIGGER_FREQ_LOW) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define ADC_EOSMP_EVENT (ADC_FLAG_EOSMP) /*!< ADC End of Sampling event */ +#define ADC_AWD1_EVENT (ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 series) */ +#define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 series) */ +#define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +/** + * @} + */ +#define ADC_AWD_EVENT ADC_AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only one analog watchdog */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +#define ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC channel configuration ready interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of sampling interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ +#define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog) */ +#define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog) */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ +#define ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC channel configuration ready flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag */ +#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag */ +#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__ ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == 0UL) + +/** + * @brief Return resolution bits in CFGR1 register RES[1:0] field. + * @param __HANDLE__ ADC handle + * @retval Value of bitfield RES in CFGR1 register. + */ +#define ADC_GET_RESOLUTION(__HANDLE__) \ + (LL_ADC_GetResolution((__HANDLE__)->Instance)) + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Enable ADC discontinuous conversion mode for regular group + * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \ + ((_REG_DISCONTINUOUS_MODE_) << 16U) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_ Auto off bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \ + ((_AUTOOFF_) << 15U) + +/** + * @brief Enable the ADC auto delay mode. + * @param _AUTOWAIT_ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \ + ((_AUTOWAIT_) << 14U) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_ Continuous mode. + * @retval None + */ +#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \ + ((_CONTINUOUS_MODE_) << 13U) + +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_ Overrun mode. + * @retval Overrun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ +/* as the default case to be compliant with other STM32 devices. */ +#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000UL) \ + ) + +/** + * @brief Set ADC scan mode with differentiation of sequencer setting + * fixed or configurable + * @param _SCAN_MODE_ Scan conversion mode. + * @retval None + */ +/* Note: Scan mode set using this macro (instead of parameter direct set) */ +/* due to different modes on other STM32 devices: */ +/* if scan mode is disabled, sequencer is set to fully configurable */ +/* with setting of only rank 1 enabled afterwards. */ +#define ADC_SCAN_SEQ_MODE(_SCAN_MODE_) \ + ( (((_SCAN_MODE_) & ADC_SCAN_SEQ_FIXED_INT) != 0UL \ + )? \ + ((_SCAN_MODE_) & (~ADC_SCAN_SEQ_FIXED_INT)) \ + : \ + (ADC_CFGR1_CHSELRMOD) \ + ) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \ + ((_DMACONTREQ_MODE_) << 1U) + +/** + * @brief Shift the AWD threshold in function of the selected ADC resolution. + * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) + * @param __HANDLE__ ADC handle + * @param _Threshold_ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ + ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2U)) + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) ||\ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV2 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV4 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV6 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV8 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV10 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV12 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV16 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV32 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV64 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV128 ) ||\ + ((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV256)) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ + ((RESOLUTION) == ADC_RESOLUTION_10B) || \ + ((RESOLUTION) == ADC_RESOLUTION_8B) || \ + ((RESOLUTION) == ADC_RESOLUTION_6B) ) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \ + ((SCAN_MODE) == ADC_SCAN_ENABLE) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED) || \ + ((SCAN_MODE) == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) + +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((REGTRIG) == ADC_SOFTWARE_START)) + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == ADC_EOC_SEQ_CONV)) + +#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \ + ((OVR) == ADC_OVR_DATA_OVERWRITTEN) ) + +#define IS_ADC_REGULAR_RANK_SEQ_FIXED(RANK) (((RANK) == ADC_RANK_CHANNEL_NUMBER) || \ + ((RANK) == ADC_RANK_NONE) ) + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) ) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_16) || \ + ((CHANNEL) == ADC_CHANNEL_17) || \ + ((CHANNEL) == ADC_CHANNEL_18) || \ + ((CHANNEL) == ADC_CHANNEL_19) || \ + ((CHANNEL) == ADC_CHANNEL_20) || \ + ((CHANNEL) == ADC_CHANNEL_21) || \ + ((CHANNEL) == ADC_CHANNEL_22) || \ + ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \ + ((CHANNEL) == ADC_CHANNEL_VREFINT) || \ + ((CHANNEL) == ADC_CHANNEL_VDDA) || \ + ((CHANNEL) == ADC_CHANNEL_VSSA) ) + +#define IS_ADC_SAMPLING_TIME_COMMON(SAMPLING_TIME_COMMON) (((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_1) || \ + ((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_2) ) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_39CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_79CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_160CYCLES_5) ) + +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) ) + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) + +#define IS_ADC_TRIGGER_FREQ(TRIGGER_FREQ) (((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_HIGH) || \ + ((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_LOW) ) + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_EOSMP_EVENT) || \ + ((EVENT) == ADC_AWD1_EVENT) || \ + ((EVENT) == ADC_AWD2_EVENT) || \ + ((EVENT) == ADC_AWD3_EVENT) || \ + ((EVENT) == ADC_OVR_EVENT) ) + +/** + * @brief Verify that a given value is aligned with the ADC resolution range. + * @param __RESOLUTION__ ADC resolution (12, 10, 8 or 6 bits). + * @param __ADC_VALUE__ value checked against the resolution. + * @retval SET (__ADC_VALUE__ in line with __RESOLUTION__) or RESET (__ADC_VALUE__ not in line with __RESOLUTION__) + */ +#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__) \ + ((__ADC_VALUE__) <= __LL_ADC_DIGITAL_SCALE(__RESOLUTION__)) + +/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification + * @{ + */ +#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1UL) && ((LENGTH) <= 8UL)) +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) + +#define ADC_SCAN_SEQ_FIXED_INT 0x80000000U /* Internal definition to differentiate sequencer setting fixed or configurable */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do{ \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IT_RDY ADC Ready interrupt source + * @arg @ref ADC_IT_CCRDY ADC channel configuration ready interrupt source + * @arg @ref ADC_IT_EOSMP ADC End of Sampling interrupt source + * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source + * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source + * @arg @ref ADC_IT_OVR ADC overrun interrupt source + * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) + * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) + * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ + ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_FLAG_RDY ADC Ready flag + * @arg @ref ADC_FLAG_CCRDY ADC channel configuration ready flag + * @arg @ref ADC_FLAG_EOSMP ADC End of Sampling flag + * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag + * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag + * @arg @ref ADC_FLAG_OVR ADC overrun flag + * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) + * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) + * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ + (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals ADC_CHANNEL_x. + * @note Example: + * __HAL_ADC_CHANNEL_TO_DECIMAL_NB(ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + +/** + * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __HAL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + */ +#define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * ADC_CHANNEL_1, ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (ADC_CHANNEL_1, ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (ADC_CHANNEL_VREFINT, ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 + * @arg @ref ADC_CHANNEL_9 + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 + * @arg @ref ADC_CHANNEL_16 + * @arg @ref ADC_CHANNEL_17 + * @arg @ref ADC_CHANNEL_18 + * @arg @ref ADC_CHANNEL_19 + * @arg @ref ADC_CHANNEL_20 + * @arg @ref ADC_CHANNEL_21 + * @arg @ref ADC_CHANNEL_22 + */ +#define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (ADC_CHANNEL_VREFINT, + * ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (ADC_CHANNEL_1, ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VDDA + * @arg @ref ADC_CHANNEL_VSSA + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ + __LL_ADC_COMMON_INSTANCE((__ADCx__)) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value + */ +#define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ + (__ADC_RESOLUTION_CURRENT__),\ + (__ADC_RESOLUTION_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ + (__ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * @note: On this STM32 series, calibtation parameter TS_CAL1 can be used + * to improve calculation accuracy. + * Refer to @ref TEMPSENSOR_CAL1_ADDR. + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32C0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32C0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref ADC_RESOLUTION_12B + * @arg @ref ADC_RESOLUTION_10B + * @arg @ref ADC_RESOLUTION_8B + * @arg @ref ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ + (__TEMPSENSOR_TYP_CALX_V__),\ + (__TEMPSENSOR_CALX_TEMP__),\ + (__VREFANALOG_VOLTAGE__),\ + (__TEMPSENSOR_ADC_DATA__),\ + (__ADC_RESOLUTION__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Include ADC HAL Extended module */ +#include "stm32c0xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_ADC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc_ex.h new file mode 100644 index 0000000000..e60ae852b6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc_ex.h @@ -0,0 +1,185 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_ADC_EX_H +#define STM32C0xx_HAL_ADC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#define ADC_IS_INDEPENDENT(__HANDLE__) (SET) + + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_ADC_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_conf_template.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_conf_template.h new file mode 100644 index 0000000000..ba22efb5bd --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_conf_template.h @@ -0,0 +1,270 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32c0xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_CONF_H +#define STM32C0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32c0xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (48000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +#if !defined (LSI_STARTUP_TIME) +#define LSI_STARTUP_TIME 130UL /*!< Time out for LSI start up, in ms */ +#endif /* LSI_STARTUP_TIME */ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32c0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32c0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32c0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32c0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32c0xx_hal_adc.h" +#include "stm32c0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32c0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32c0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32c0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32c0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32c0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32c0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32c0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32c0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32c0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32c0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32c0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32c0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32c0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32c0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32c0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32c0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_CONF_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_cortex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_cortex.h new file mode 100644 index 0000000000..9316a6fe34 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_cortex.h @@ -0,0 +1,365 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_CORTEX_H +#define STM32C0xx_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_CORTEX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc.h new file mode 100644 index 0000000000..cf4e879bcf --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_crc.h + * @author MCD Application Team + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_CRC_H +#define STM32C0xx_HAL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ +} HAL_CRC_StateTypeDef; + +/** + * @brief CRC Init Structure definition + */ +typedef struct +{ + uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. + If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default + X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + + X^4 + X^2+ X +1. + In that case, there is no need to set GeneratingPolynomial field. + If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and + CRCLength fields must be set. */ + + uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. + If set to DEFAULT_INIT_VALUE_ENABLE, resort to default + 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If + otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ + + uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree + respectively equal to 7, 8, 16 or 32. This field is written in normal, + representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 + is written 0x65. No need to specify it if DefaultPolynomialUse is set to + DEFAULT_POLYNOMIAL_ENABLE. */ + + uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. + Value can be either one of + @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), + @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), + @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), + @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ + + uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse + is set to DEFAULT_INIT_VALUE_ENABLE. */ + + uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. + Can be either one of the following values + @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion + @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D + becomes 0x58D43CB2 + @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, + 0x1A2B3C4D becomes 0xD458B23C + @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D + becomes 0xB23CD458 */ + + uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. + Can be either + @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, + @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted + into 0x22CC4488 */ +} CRC_InitTypeDef; + +/** + * @brief CRC Handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + CRC_InitTypeDef Init; /*!< CRC configuration parameters */ + + HAL_LockTypeDef Lock; /*!< CRC Locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + + uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. + Can be either + @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes + (8-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of + half-words (16-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words + (32-bit data) + + Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization + error must occur if InputBufferFormat is not one of the three values listed + above */ +} CRC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial + * @{ + */ +#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used + * @{ + */ +#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ +#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used + * @{ + */ +#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ +#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral + * @{ + */ +#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ +#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ +#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ +#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions + * @{ + */ +#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ +#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ +#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ +#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ +/** + * @} + */ + +/** @defgroup CRC_Input_Buffer_Format Input Buffer Format + * @{ + */ +/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but + * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set + * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for + * the CRC APIs to provide a correct result */ +#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ +#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ +#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ +#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state. + * @param __HANDLE__ CRC handle. + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Reset CRC Data Register. + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) + +/** + * @brief Set CRC INIT non-default value + * @param __HANDLE__ CRC handle + * @param __INIT__ 32-bit initial value + * @retval None + */ +#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) + +/** + * @brief Store data in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @param __VALUE__ Value to be stored in the ID register + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Return the data stored in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval Value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRC_Private_Macros CRC Private Macros + * @{ + */ + +#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ + ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) + +#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ + ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) + +#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ + ((LENGTH) == CRC_POLYLENGTH_16B) || \ + ((LENGTH) == CRC_POLYLENGTH_8B) || \ + ((LENGTH) == CRC_POLYLENGTH_7B)) + +#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) + +/** + * @} + */ + +/* Include CRC HAL Extended module */ +#include "stm32c0xx_hal_crc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_CRC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc_ex.h new file mode 100644 index 0000000000..8cd65db879 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_crc_ex.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_crc_ex.h + * @author MCD Application Team + * @brief Header file of CRC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_CRC_EX_H +#define STM32C0xx_HAL_CRC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CRCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants + * @{ + */ + +/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes + * @{ + */ +#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */ +#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */ +/** + * @} + */ + +/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes + * @{ + */ +#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */ +#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros + * @{ + */ + +/** + * @brief Set CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT) + +/** + * @brief Unset CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT)) + +/** + * @brief Set CRC non-default polynomial + * @param __HANDLE__ CRC handle + * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial + * @retval None + */ +#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros + * @{ + */ + +#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_WORD)) + +#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \ + ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRCEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRCEx_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength); +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode); +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_CRC_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_def.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_def.h new file mode 100644 index 0000000000..9ce6a0e991 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_def.h @@ -0,0 +1,197 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_DEF +#define STM32C0xx_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00U, + HAL_LOCKED = 0x01U +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0U) + +/** @brief Reset the Handles State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handles "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handles "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) + +#if (USE_RTOS == 1U) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0U) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0U) +#endif /* USE_RTOS */ + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +/* GNU Compiler */ +#if defined (__GNUC__) +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4U))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +/* ARM Compiler */ +#if defined (__CC_ARM) +#define __ALIGN_BEGIN __align(4U) +/* IAR Compiler */ +#elif defined (__ICCARM__) +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) +/* ARM Compiler + ------------ + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || defined ( __GNUC__ ) +/* ARM & GNUCompiler + ---------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_DEF */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma.h new file mode 100644 index 0000000000..49485ac5b3 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma.h @@ -0,0 +1,570 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_DMA_H +#define STM32C0xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ + + +#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX request generator 0 */ +#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX request generator 1 */ +#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX request generator 2 */ +#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX request generator 3 */ +#define DMA_REQUEST_ADC1 5U /*!< DMAMUX ADC1 request */ +#define DMA_REQUEST_I2C1_RX 10U /*!< DMAMUX I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 11U /*!< DMAMUX I2C1 TX request */ +#define DMA_REQUEST_SPI1_RX 16U /*!< DMAMUX SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 17U /*!< DMAMUX SPI1 TX request */ +#define DMA_REQUEST_TIM1_CH1 20U /*!< DMAMUX TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 21U /*!< DMAMUX TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 22U /*!< DMAMUX TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 23U /*!< DMAMUX TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_TRIG_COM 24U /*!< DMAMUX TIM1 TRIG COM request */ +#define DMA_REQUEST_TIM1_UP 25U /*!< DMAMUX TIM1 UP request */ +#define DMA_REQUEST_TIM3_CH1 32U /*!< DMAMUX TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 33U /*!< DMAMUX TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 34U /*!< DMAMUX TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 35U /*!< DMAMUX TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_TRIG 36U /*!< DMAMUX TIM3 TRIG request */ +#define DMA_REQUEST_TIM3_UP 37U /*!< DMAMUX TIM3 UP request */ +#define DMA_REQUEST_TIM16_CH1 44U /*!< DMAMUX TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_TRIG_COM 45U /*!< DMAMUX TIM16 TRIG COM request */ +#define DMA_REQUEST_TIM16_UP 46U /*!< DMAMUX TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 47U /*!< DMAMUX TIM17 CH2 request */ +#define DMA_REQUEST_TIM17_TRIG_COM 48U /*!< DMAMUX TIM17 TRIG COM request */ +#define DMA_REQUEST_TIM17_UP 49U /*!< DMAMUX TIM17 UP request */ +#define DMA_REQUEST_USART1_RX 50U /*!< DMAMUX USART1 RX request */ +#define DMA_REQUEST_USART1_TX 51U /*!< DMAMUX USART1 TX request */ +#define DMA_REQUEST_USART2_RX 52U /*!< DMAMUX USART2 RX request */ +#define DMA_REQUEST_USART2_TX 53U /*!< DMAMUX USART2 TX request */ + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR DMA_CCR_CIRC /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE +#define DMA_IT_HT DMA_CCR_HTIE +#define DMA_IT_TE DMA_CCR_TEIE +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ + +#define DMA_FLAG_GI1 DMA_ISR_GIF1 +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 +#define DMA_FLAG_GI2 DMA_ISR_GIF2 +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 +#define DMA_FLAG_GI3 DMA_ISR_GIF3 +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + DMA_FLAG_TC3) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ + +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + DMA_FLAG_HT3) + + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + DMA_FLAG_TE3) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GI1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GI2 :\ + DMA_ISR_GIF3) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag + * @arg DMA_FLAG_HTIFx: Half transfer complete flag + * @arg DMA_FLAG_TEIFx: Transfer error flag + * @arg DMA_FLAG_GIFx: Global interrupt flag + * Where x can be 1_3 to select the DMA Channel flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag + * @arg DMA_FLAG_HTIFx: Half transfer complete flag + * @arg DMA_FLAG_TEIFx: Transfer error flag + * @arg DMA_FLAG_GIFx: Global interrupt flag + * Where x can be 1_3 to select the DMA Channel flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__)) + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or disabled. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Returns the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32c0xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, + uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, + void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_REQUEST_USART2_TX) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_DMA_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma_ex.h new file mode 100644 index 0000000000..d74bdfbc36 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_dma_ex.h @@ -0,0 +1,262 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_DMA_EX_H +#define STM32C0xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMA Synchro definition + */ + + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE*/ + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 0U /*!< Synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX1_SYNC_EXTI1 1U /*!< Synchronization Signal is EXTI1 IT */ +#define HAL_DMAMUX1_SYNC_EXTI2 2U /*!< Synchronization Signal is EXTI2 IT */ +#define HAL_DMAMUX1_SYNC_EXTI3 3U /*!< Synchronization Signal is EXTI3 IT */ +#define HAL_DMAMUX1_SYNC_EXTI4 4U /*!< Synchronization Signal is EXTI4 IT */ +#define HAL_DMAMUX1_SYNC_EXTI5 5U /*!< Synchronization Signal is EXTI5 IT */ +#define HAL_DMAMUX1_SYNC_EXTI6 6U /*!< Synchronization Signal is EXTI6 IT */ +#define HAL_DMAMUX1_SYNC_EXTI7 7U /*!< Synchronization Signal is EXTI7 IT */ +#define HAL_DMAMUX1_SYNC_EXTI8 8U /*!< Synchronization Signal is EXTI8 IT */ +#define HAL_DMAMUX1_SYNC_EXTI9 9U /*!< Synchronization Signal is EXTI9 IT */ +#define HAL_DMAMUX1_SYNC_EXTI10 10U /*!< Synchronization Signal is EXTI10 IT */ +#define HAL_DMAMUX1_SYNC_EXTI11 11U /*!< Synchronization Signal is EXTI11 IT */ +#define HAL_DMAMUX1_SYNC_EXTI12 12U /*!< Synchronization Signal is EXTI12 IT */ +#define HAL_DMAMUX1_SYNC_EXTI13 13U /*!< Synchronization Signal is EXTI13 IT */ +#define HAL_DMAMUX1_SYNC_EXTI14 14U /*!< Synchronization Signal is EXTI14 IT */ +#define HAL_DMAMUX1_SYNC_EXTI15 15U /*!< Synchronization Signal is EXTI15 IT */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 16U /*!< Synchronization Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 17U /*!< Synchronization Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 18U /*!< Synchronization Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_SYNC_TIM14_OC 22U /*!< Synchronization Signal is TIM14 OC */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT 0U /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 0U /*!< Request generator Signal is EXTI0 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 1U /*!< Request generator Signal is EXTI1 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 2U /*!< Request generator Signal is EXTI2 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 3U /*!< Request generator Signal is EXTI3 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 4U /*!< Request generator Signal is EXTI4 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 5U /*!< Request generator Signal is EXTI5 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 6U /*!< Request generator Signal is EXTI6 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 7U /*!< Request generator Signal is EXTI7 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 8U /*!< Request generator Signal is EXTI8 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 9U /*!< Request generator Signal is EXTI9 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 10U /*!< Request generator Signal is EXTI10 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 11U /*!< Request generator Signal is EXTI11 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 12U /*!< Request generator Signal is EXTI12 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 13U /*!< Request generator Signal is EXTI13 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 14U /*!< Request generator Signal is EXTI14 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 15U /*!< Request generator Signal is EXTI15 IT */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 16U /*!< Request generator Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 17U /*!< Request generator Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 18U /*!< Request generator Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_TIM14_OC 22U /*!< Request generator Signal is TIM14 OC */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0U /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef \ + *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM14_OC) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM14_OC) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_DMA_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_exti.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_exti.h new file mode 100644 index 0000000000..94900d6024 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_exti.h @@ -0,0 +1,309 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_EXTI_H +#define STM32C0xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* RisingCallback)(void); /*!< Exti rising callback */ + void (* FallingCallback)(void); /*!< Exti falling callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | 0x0Fu) +#define EXTI_LINE_16 (EXTI_RESERVED | EXTI_REG1 | 0x10U) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11U) +#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12U) +#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13U) +#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14U) +#define EXTI_LINE_21 (EXTI_RESERVED | EXTI_REG1 | 0x15U) +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16U) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17U) +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18U) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19U) +#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1AU) +#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1BU) +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1CU) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1DU) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1EU) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1FU) +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#if defined(STM32C031xx) +#define EXTI_GPIOD 0x00000003u +#endif /* STM32C031xx */ +#define EXTI_GPIOF 0x00000005u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ + +#define EXTI_LINE_NB 32uL + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | \ + EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00U) \ + &&((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32U) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32U)))) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00U) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00U)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00U) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00U) +#if defined(STM32C031xx) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOF)) +#elif defined(STM32C011xx) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOF)) +#endif /* STM32C031xx */ +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, + void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_EXTI_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash.h new file mode 100644 index 0000000000..e2404e96a7 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash.h @@ -0,0 +1,788 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_FLASH_H +#define STM32C0xx_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled + This parameter must be a value between 0 and (FLASH_PAGE_NB - 1) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (FLASH_PAGE_NB - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and [FLASH_PAGE_NB - 1]*/ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and [FLASH_PAGE_NB - 1] */ + uint32_t RDPLevel; /*!< Set the read protection level (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of + @ref FLASH_OB_USER_BOR_LEVEL, + @ref FLASH_OB_USER_nRST_STOP, + @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN, + @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, + @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, + @ref FLASH_OB_USER_SRAM_PARITY, + @ref FLASH_OB_USER_nBOOT_SEL, + @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_nBOOT0, + @ref FLASH_OB_USER_INPUT_RESET_HOLDER*/ + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_OB_PCROP_ZONE + and @ref FLASH_OB_PCROP_RDP. Note that once set, Pcrop erase on RDP level 1 + regression (PCROP_RDP bit) can not be reset. It will be reset by mass erase */ + uint32_t PCROP1AStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address + of start block to protect. Make sure this parameter is multiple of PCROP + granularity: 512 Bytes.*/ + uint32_t PCROP1AEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address + of end block to protect. Make sure this parameter is multiple of PCROP + granularity: 512 Bytes.*/ + uint32_t PCROP1BStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). It represents first address + of start block to protect. Make sure this parameter is multiple of PCROP + granularity: 512 Bytes.*/ + uint32_t PCROP1BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address + of end block to protect. Make sure this parameter is multiple of PCROP + granularity: 512 Bytes.*/ + uint32_t BootEntryPoint; /*!< Allow to force a unique boot entry point to Flash or system Flash */ + uint32_t SecSize; /*!< This parameter defines securable memory area width in number of pages starting + from Flash base address. This parameter must be a value between [0] + and [FLASH_PAGE_NB], [0] meaning no secure area defined, [1] meaning first page + only protected, etc... */ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + uint32_t ErrorCode; /* FLASH error code */ + uint32_t ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + uint32_t Address; /* Internal variable to save address selected for program in IT context */ + uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U /*!< Flash key1 */ +#define FLASH_KEY2 0xCDEF89ABU /*!< Flash key2: used with FLASH_KEY1 + to unlock the FLASH registers access */ +#define FLASH_OPTKEY1 0x08192A3BU /*!< Flash option byte key1 */ +#define FLASH_OPTKEY2 0x4C5D6E7FU /*!< Flash option byte key2: used with FLASH_OPTKEY1 + to allow option bytes operations */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ + +/** + * @} + */ + +/** @defgroup FLASH_Flags FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of operation flag */ +#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH Operation error flag */ +#define FLASH_FLAG_PROGERR FLASH_SR_PROGERR /*!< FLASH Programming error flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protection error flag */ +#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming alignment error flag */ +#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */ +#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming sequence error flag */ +#define FLASH_FLAG_MISERR FLASH_SR_MISERR /*!< FLASH Fast programming data miss error flag */ +#define FLASH_FLAG_FASTERR FLASH_SR_FASTERR /*!< FLASH Fast programming error flag */ +#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH PCROP read error flag */ +#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option validity error flag */ +#define FLASH_FLAG_BSY FLASH_SR_BSY1 /*!< FLASH Operation Busy flag */ +#define FLASH_FLAG_CFGBSY FLASH_SR_CFGBSY /*!< FLASH Configuration Busy flag */ +#define FLASH_FLAG_PESD FLASH_SR_PESD /*!< FLASH Programming/erase operation suspended */ + +#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | FLASH_FLAG_PGSERR | \ + FLASH_FLAG_MISERR | FLASH_FLAG_FASTERR | FLASH_FLAG_RDERR | \ + FLASH_FLAG_OPTVERR) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_OPERR FLASH_CR_ERRIE /*!< Error Interrupt source */ +#define FLASH_IT_RDERR FLASH_CR_RDERRIE /*!< PCROP Read Error Interrupt source*/ +/** + * @} + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_FLAG_OPERR +#define HAL_FLASH_ERROR_PROG FLASH_FLAG_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_FLAG_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_FLAG_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_FLAG_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR +#define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR +#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES FLASH_CR_PER /*!< Pages erase only */ +#define FLASH_TYPEERASE_MASS FLASH_CR_MER1 /*!< Flash mass erase activation */ +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_DOUBLEWORD FLASH_CR_PG /*!< Program a double-word (64-bit) at a specified address */ +#define FLASH_TYPEPROGRAM_FAST FLASH_CR_FSTPG /*!< Fast program a 32 row double-word (64-bit) + at a specified address */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Type FLASH Option Bytes Type + * @{ + */ +#define OPTIONBYTE_WRP 0x00000001U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x00000002U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */ +#define OPTIONBYTE_PCROP 0x00000008U /*!< PCROP option byte configuration */ +#define OPTIONBYTE_SEC 0x00000010U /*!< SEC option byte configuration */ +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER) /*!< All option byte + configuration */ + +/** + * @} + */ + +/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area + * @{ + */ +#define OB_WRPAREA_ZONE_A 0x00000001U /*!< Flash Zone A */ +#define OB_WRPAREA_ZONE_B 0x00000002U /*!< Flash Zone B */ +/** + * @} + */ + +/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0x000000AAU +#define OB_RDP_LEVEL_1 0x000000BBU +#define OB_RDP_LEVEL_2 0x000000CCU /*!< Warning: When enabling read protection level 2 + it is no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type + * @{ + */ + +#define OB_USER_BOR_LEV (FLASH_OPTR_BORF_LEV | FLASH_OPTR_BORR_LEV) /*!< BOR reset Level */ +#define OB_USER_NRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering + the stop mode */ +#define OB_USER_NRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering + the standby mode */ +#define OB_USER_NRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering + the shutdown mode */ +#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */ +#define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter + freeze in stop mode */ +#define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter + freeze in standby mode */ +#define OB_USER_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Window watchdog selection */ +#define OB_USER_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity check control */ +#define OB_USER_NBOOT_SEL FLASH_OPTR_nBOOT_SEL /*!< Boot Selection */ +#define OB_USER_NBOOT1 FLASH_OPTR_nBOOT1 /*!< nBoot1 configuration */ +#define OB_USER_NBOOT0 FLASH_OPTR_nBOOT0 /*!< nBoot0 configuration */ +#define OB_USER_NRST_MODE FLASH_OPTR_NRST_MODE /*!< Reset pin configuration */ +#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */ + +#define OB_USER_ALL (OB_USER_BOR_LEV | OB_USER_NRST_STOP | \ + OB_USER_NRST_STDBY | OB_USER_NRST_SHDW | OB_USER_IWDG_SW | \ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \ + OB_USER_RAM_PARITY_CHECK | OB_USER_NBOOT_SEL | OB_USER_NBOOT1 | \ + OB_USER_NBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_ENABLE FLASH Option Bytes User BOR enable + * @{ + */ +#define OB_BOR_DISABLE 0x00000000U /*!< BOR Reset set to default */ +#define OB_BOR_ENABLE FLASH_OPTR_BOR_EN /*!< Use option byte to define BOR thresholds */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level + * @{ + */ +#define OB_BOR_LEVEL_FALLING_0 0x00000000U /*!< BOR falling level 1 with + threshold around 2.0V */ +#define OB_BOR_LEVEL_FALLING_1 FLASH_OPTR_BORF_LEV_0 /*!< BOR falling level 2 with + threshold around 2.2V */ +#define OB_BOR_LEVEL_FALLING_2 FLASH_OPTR_BORF_LEV_1 /*!< BOR falling level 3 with + threshold around 2.5V */ +#define OB_BOR_LEVEL_FALLING_3 (FLASH_OPTR_BORF_LEV_0 | FLASH_OPTR_BORF_LEV_1) /*!< BOR falling level 4 with + threshold around 2.8V */ +#define OB_BOR_LEVEL_RISING_0 0x00000000U /*!< BOR rising level 1 with + threshold around 2.1V */ +#define OB_BOR_LEVEL_RISING_1 FLASH_OPTR_BORR_LEV_0 /*!< BOR rising level 2 with + threshold around 2.3V */ +#define OB_BOR_LEVEL_RISING_2 FLASH_OPTR_BORR_LEV_1 /*!< BOR rising level 3 with + threshold around 2.6V */ +#define OB_BOR_LEVEL_RISING_3 (FLASH_OPTR_BORR_LEV_0 | FLASH_OPTR_BORR_LEV_1) /*!< BOR rising level 4 with + threshold around 2.9V */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop + * @{ + */ +#define OB_STOP_RST 0x00000000U /*!< Reset generated when entering the stop mode */ +#define OB_STOP_NORST FLASH_OPTR_nRST_STOP /*!< No reset generated when entering the stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby + * @{ + */ +#define OB_STANDBY_RST 0x00000000U /*!< Reset generated when entering the standby mode */ +#define OB_STANDBY_NORST FLASH_OPTR_nRST_STDBY /*!< No reset generated when entering the standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown + * @{ + */ +#define OB_SHUTDOWN_RST 0x00000000U /*!< Reset generated when entering the shutdown mode */ +#define OB_SHUTDOWN_NORST FLASH_OPTR_nRST_SHDW /*!< No reset generated when entering the shutdown mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type + * @{ + */ +#define OB_IWDG_HW 0x00000000U /*!< Hardware independent watchdog */ +#define OB_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Software independent watchdog */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen + in Stop mode */ +#define OB_IWDG_STOP_RUN FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter is running + in Stop mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Independent watchdog counter is frozen + in Standby mode */ +#define OB_IWDG_STDBY_RUN FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter is running + in Standby mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type + * @{ + */ +#define OB_WWDG_HW 0x00000000U /*!< Hardware window watchdog */ +#define OB_WWDG_SW FLASH_OPTR_WWDG_SW /*!< Software window watchdog */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_SRAM_PARITY FLASH Option Bytes User SRAM parity + * @{ + */ +#define OB_SRAM_PARITY_ENABLE 0x00000000U /*!< Sram parity enable */ +#define OB_SRAM_PARITY_DISABLE FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity disable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT_SEL FLASH Option Bytes User Boot0 Selection + * @{ + */ +#define OB_BOOT0_FROM_PIN 0x00000000U /*!< BOOT0 signal is defined by PA14/BOOT0 pin value */ +#define OB_BOOT0_FROM_OB FLASH_OPTR_nBOOT_SEL /*!< BOOT0 signal is defined by nBOOT0 option bit */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type + * @{ + */ +#define OB_BOOT1_SRAM 0x00000000U /*!< Embedded SRAM is selected as boot space + (if nBOOT0=0 or BOOT0_pin=1) */ +#define OB_BOOT1_SYSTEM FLASH_OPTR_nBOOT1 /*!< System memory is selected as boot space + (if nBOOT0=0 or BOOT0_pin=1) */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit + * @{ + */ +#define OB_NBOOT0_RESET 0x00000000U /*!< nBOOT0 = 0 */ +#define OB_NBOOT0_SET FLASH_OPTR_nBOOT0 /*!< nBOOT0 = 1 */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_RESET_CONFIG FLASH Option Bytes User reset config bit + * @{ + */ +#define OB_RESET_MODE_INPUT_ONLY FLASH_OPTR_NRST_MODE_0 /*!< Reset pin is in Reset input mode only */ +#define OB_RESET_MODE_GPIO FLASH_OPTR_NRST_MODE_1 /*!< Reset pin is in GPIO mode mode only */ +#define OB_RESET_MODE_INPUT_OUTPUT FLASH_OPTR_NRST_MODE /*!< Reset pin is in reset input and output mode */ +/** + * @} + */ + +/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit + * @{ + */ +#define OB_IRH_ENABLE 0x00000000U /*!< Internal Reset handler enable */ +#define OB_IRH_DISABLE FLASH_OPTR_IRHEN /*!< Internal Reset handler disable */ +/** + * @} + */ + +/** @defgroup FLASH_OB_PCROP_ZONE FLASH Option Bytes PCROP ZONE + * @{ + */ +#define OB_PCROP_ZONE_A 0x00000001U /*!< PCROP Zone A */ +#define OB_PCROP_ZONE_B 0x00000002U /*!< PCROP Zone B */ +/** + * @} + */ + +/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 */ +#define OB_PCROP_RDP_ERASE FLASH_PCROP1AER_PCROP_RDP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 + (full mass erase).Once this bit is set only, + it will be reset by mass erase */ +/** + * @} + */ + +/** @defgroup FLASH_OB_SEC_BOOT_LOCK FLASH Option Bytes Secure boot lock + * @{ + */ +#define OB_BOOT_ENTRY_FORCED_NONE 0x00000000U /*!< Boot entry is free */ +#define OB_BOOT_ENTRY_FORCED_FLASH FLASH_SECR_BOOT_LOCK /*!< Boot entry is forced to Flash or System Flash */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * Returned value can be one of the following values : + * @arg @ref FLASH_LATENCY_0 FLASH Zero wait state + * @arg @ref FLASH_LATENCY_1 FLASH One wait state + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0U) +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__)) +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt + * @arg @ref FLASH_IT_OPERR Error Interrupt + * @arg @ref FLASH_IT_RDERR PCROP Read Error Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__)) + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @arg @ref FLASH_FLAG_BSY FLASH write/erase operations in progress flag + * @arg @ref FLASH_FLAG_CFGBSY FLASH configuration is busy : program or erase setting are used. + * @arg @ref FLASH_FLAG_PESD FLASH Programming/erase operation suspended + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) (READ_BIT(FLASH->SR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the FLASHs pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag + * @arg @ref FLASH_FLAG_OPERR FLASH Operation error flag + * @arg @ref FLASH_FLAG_PROGERR FLASH Programming error flag + * @arg @ref FLASH_FLAG_WRPERR FLASH Write protection error flag + * @arg @ref FLASH_FLAG_PGAERR FLASH Programming alignment error flag + * @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag + * @arg @ref FLASH_FLAG_PGSERR FLASH Programming sequence error flag + * @arg @ref FLASH_FLAG_MISERR FLASH Fast programming data miss error flag + * @arg @ref FLASH_FLAG_FASTERR FLASH Fast programming error flag + * @arg @ref FLASH_FLAG_RDERR FLASH PCROP read error flag + * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32c0xx_hal_flash_ex.h" +/* Exported variables --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Variables FLASH Exported Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types --------------------------------------------------------*/ +/** @defgroup FLASH_Private_types FLASH Private Types + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE + +#define FLASH_SIZE ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0xFFFFU)) ? 0x8000U : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x0000U)) ? 0x8000U : \ + (((uint32_t)(*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x00FFU)) << 10U))) + +#define FLASH_BANK_SIZE (FLASH_SIZE) /*!< FLASH Bank Size */ + +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2 KBytes */ + + +#define FLASH_PAGE_NB 16U + + +#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ + +#define FLASH_TYPENONE 0x00000000U /*!< No Programmation Procedure On Going */ + +#define FLASH_FLAG_SR_ERROR (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \ + FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | FLASH_FLAG_PGSERR | \ + FLASH_FLAG_MISERR | FLASH_FLAG_FASTERR | FLASH_FLAG_RDERR | \ + FLASH_FLAG_OPTVERR) /*!< All SR error flags */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ +#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && \ + ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL))) + +#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && \ + ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL))) + +#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U) && \ + ((__ADDRESS__) <= (0x1FFF7400U - 8UL))) + +#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__)) || \ + (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__))) + +#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && \ + ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL))) + +#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB) + +#define IS_FLASH_BANK(__BANK__) ((__BANK__) == 0x00UL) + +#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ + ((__VALUE__) == FLASH_TYPEERASE_MASS)) + +#define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) + +#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \ + (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U)) + +#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || \ + ((__VALUE__) == OB_WRPAREA_ZONE_B)) + +#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_1) ||\ + ((__LEVEL__) == OB_RDP_LEVEL_2)) + +#define IS_OB_USER_TYPE(__TYPE__) ((((__TYPE__) & OB_USER_ALL) != 0x00U) && \ + (((__TYPE__) & ~OB_USER_ALL) == 0x00U)) + +#define IS_OB_USER_CONFIG(__TYPE__,__CONFIG__) ((~(__TYPE__) & (__CONFIG__)) == 0x00U) + +#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \ + OB_PCROP_RDP_ERASE)) == 0x00U) + +#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE) || \ + ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH)) + +#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U)) + +#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ + ((__LATENCY__) == FLASH_LATENCY_1)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_FLASH_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash_ex.h new file mode 100644 index 0000000000..f201900df5 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_flash_ex.h @@ -0,0 +1,116 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_FLASH_EX_H +#define STM32C0xx_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants + * @{ + */ +/** @defgroup FLASHEx_Empty_Check FLASHEx Empty Check + * @{ + */ +#define FLASH_PROG_NOT_EMPTY 0x00000000u /*!< 1st location in Flash is programmed */ +#define FLASH_PROG_EMPTY FLASH_ACR_PROGEMPTY /*!< 1st location in Flash is empty */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +void HAL_FLASHEx_EnableDebugger(void); +void HAL_FLASHEx_DisableDebugger(void); +uint32_t HAL_FLASHEx_FlashEmptyCheck(void); +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty); +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Bank); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants + * @{ + */ +#define FLASH_PCROP_GRANULARITY_OFFSET 9u /*!< FLASH Code Readout + Protection granularity offset */ +#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout + Protection granularity, 512 Bytes */ +/** + * @} + */ + + +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ +#define IS_FLASH_EMPTY_CHECK(__VALUE__) (((__VALUE__) == FLASH_PROG_EMPTY) || ((__VALUE__) == FLASH_PROG_NOT_EMPTY)) +void FLASH_PageErase(uint32_t Page); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_FLASH_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio.h new file mode 100644 index 0000000000..29fda2ffa8 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio.h @@ -0,0 +1,349 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_GPIO_H +#define STM32C0xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_ALL ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0xX0yz00YZ + * - X : GPIO mode or EXTI Mode + * - y : External IT or Event trigger detection + * - z : IO configuration on External IT or Event + * - Y : Output type (Push Pull or Open Drain) + * - Z : IO Direction mode (Input, Output, Alternate or Analog) + * @{ + */ +/*!< Input Floating Mode */ +#define GPIO_MODE_INPUT (0x00000000U) +/*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_PP (0x00000001U) +/*!< Output Open Drain Mode */ +#define GPIO_MODE_OUTPUT_OD (0x00000011U) +/*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_PP (0x00000002U) +/*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_AF_OD (0x00000012U) +/*!< Analog Mode */ +#define GPIO_MODE_ANALOG (0x00000003U) +/*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_RISING (0x10110000U) +/*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_FALLING (0x10210000U) +/*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) +/*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_RISING (0x10120000U) +/*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (0x10220000U) +/*!< External Event Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000u) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001u) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (0x00000002u) /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003u) /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line is rising edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line rising pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__) (EXTI->RPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is falling edge asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI line falling pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__) (EXTI->FPR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (__HAL_GPIO_EXTI_GET_RISING_IT(__EXTI_LINE__) || \ + __HAL_GPIO_EXTI_GET_FALLING_IT(__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) \ + do { \ + __HAL_GPIO_EXTI_CLEAR_RISING_IT(__EXTI_LINE__); \ + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(__EXTI_LINE__); \ + } while(0) + + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) + +/** + * @brief Clear the EXTI line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32c0xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, const GPIO_InitTypeDef *pGPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_GPIO_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio_ex.h new file mode 100644 index 0000000000..ce6a7e882a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio_ex.h @@ -0,0 +1,331 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_GPIO_EX_H +#define STM32C0xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +#if defined(STM32C011xx) +/*------------------------- STM32C011xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_I2S1 ((uint8_t)0x00) /*!< I2S1 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ +#define GPIO_AF3_TIM3 ((uint8_t)0x03) /*!< TIM3 Alternate Function mapping */ +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART2 ((uint8_t)0x04) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_I2S ((uint8_t)0x05) /*!< I2S Alternate Function mapping */ +#define GPIO_AF5_USART1 ((uint8_t)0x05) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF7_I2C1 ((uint8_t)0x07) /*!< I2C1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2S1 ((uint8_t)0x08) /*!< I2S1 Alternate Function mapping */ +#define GPIO_AF8_SPI1 ((uint8_t)0x08) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF8_IR ((uint8_t)0x08) /*!< IR Alternate Function mapping */ +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TIM1 ((uint8_t)0x09) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF9_USART2 ((uint8_t)0x09) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF9_SPI1 ((uint8_t)0x09) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF9_I2S1 ((uint8_t)0x09) /*!< I2S1 Alternate Function mapping */ +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_TIM1 ((uint8_t)0x0A) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF10_I2C1 ((uint8_t)0x0A) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF10_SPI1 ((uint8_t)0x0A) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF10_TIM16 ((uint8_t)0x0A) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF10_TIM17 ((uint8_t)0x0A) /*!< TIM17 Alternate Function mapping */ +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF11_TIM3 ((uint8_t)0x0B) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF11_MCO2 ((uint8_t)0x0B) /*!< MCO2 Alternate Function mapping */ +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_TIM3 ((uint8_t)0x0C) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF12_USART1 ((uint8_t)0x0C) /*!< USART1 Alternate Function mapping */ +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_TIM14 ((uint8_t)0x0D) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF13_TIM3 ((uint8_t)0x0D) /*!< TIM3 Alternate Function mapping */ +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_USART1 ((uint8_t)0x0E) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF14_I2C1 ((uint8_t)0x0E) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /*!< TIM16 Alternate Function mapping */ +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF15_MCO2 ((uint8_t)0x0F) /*!< MCO2 Alternate Function mapping */ +#define GPIO_AF15_TIM17 ((uint8_t)0x0F) /*!< TIM17 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) +#endif /* STM32C011xx */ + +#if defined(STM32C031xx) +/*------------------------- STM32C031xx --------------------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF0_IR ((uint8_t)0x00) /*!< IR Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_OSC ((uint8_t)0x00) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_OSC32 ((uint8_t)0x00) /*!< OSC32 (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /*!< SWJ (SWD) Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF0_I2S1 ((uint8_t)0x00) /*!< I2S1 Alternate Function mapping */ +#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_IR ((uint8_t)0x01) /*!< IR Alternate Function mapping */ +#define GPIO_AF1_OSC ((uint8_t)0x01) /*!< OSC (By pass and Enable) Alternate Function mapping */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< USART2 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM14 ((uint8_t)0x02) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_MCO2 ((uint8_t)0x03) /*!< MCO2 Alternate Function mapping */ +#define GPIO_AF3_TIM3 ((uint8_t)0x03) /*!< TIM3 Alternate Function mapping */ +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF4_USART2 ((uint8_t)0x04) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_I2S ((uint8_t)0x05) /*!< I2S Alternate Function mapping */ +#define GPIO_AF5_USART1 ((uint8_t)0x05) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF5_TIM1 ((uint8_t)0x05) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_I2C1 ((uint8_t)0x06) /*!< I2C1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_EVENTOUT ((uint8_t)0x07) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF7_I2C1 ((uint8_t)0x07) /*!< I2C1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_I2S1 ((uint8_t)0x08) /*!< I2S1 Alternate Function mapping */ +#define GPIO_AF8_SPI1 ((uint8_t)0x08) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF8_IR ((uint8_t)0x08) /*!< IR Alternate Function mapping */ +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TIM1 ((uint8_t)0x09) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF9_USART2 ((uint8_t)0x09) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF9_SPI1 ((uint8_t)0x09) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF9_I2S1 ((uint8_t)0x09) /*!< I2S1 Alternate Function mapping */ +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_TIM1 ((uint8_t)0x0A) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF10_I2C1 ((uint8_t)0x0A) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF10_SPI1 ((uint8_t)0x0A) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF10_TIM16 ((uint8_t)0x0A) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF10_TIM17 ((uint8_t)0x0A) /*!< TIM17 Alternate Function mapping */ +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF11_TIM3 ((uint8_t)0x0B) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF11_MCO2 ((uint8_t)0x0B) /*!< MCO2 Alternate Function mapping */ +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_TIM3 ((uint8_t)0x0C) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF12_USART1 ((uint8_t)0x0C) /*!< USART1 Alternate Function mapping */ +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_TIM14 ((uint8_t)0x0D) /*!< TIM14 Alternate Function mapping */ +#define GPIO_AF13_TIM3 ((uint8_t)0x0D) /*!< TIM3 Alternate Function mapping */ +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_USART1 ((uint8_t)0x0E) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF14_I2C1 ((uint8_t)0x0E) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /*!< TIM16 Alternate Function mapping */ +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ +#define GPIO_AF15_MCO2 ((uint8_t)0x0F) /*!< MCO2 Alternate Function mapping */ +#define GPIO_AF15_TIM17 ((uint8_t)0x0F) /*!< TIM17 Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) +#endif /* STM32C031xx */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index + * @{ + */ +#if defined(STM32C011xx) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOF))? 3uL : 5uL) +#elif defined(STM32C031xx) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOF))? 4uL : 5uL) +#endif /* STM32C011xx */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_GPIO_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c.h new file mode 100644 index 0000000000..e0aa646111 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c.h @@ -0,0 +1,835 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_I2C_H +#define STM32C0xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32c0xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START)) & \ + (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32c0xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_I2C_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c_ex.h new file mode 100644 index 0000000000..7979bd0da7 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2c_ex.h @@ -0,0 +1,173 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_I2C_EX_H +#define STM32C0xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#else +#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ +#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32c0xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_I2C_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2s.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2s.h new file mode 100644 index 0000000000..3cfb8a4826 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_i2s.h @@ -0,0 +1,553 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2s.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_I2S_H +#define STM32C0xx_HAL_I2S_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +} I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ + HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ +} HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) +typedef struct __I2S_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ + void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ + void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ + void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ + void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ + void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} I2S_HandleTypeDef; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL I2S Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ + HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ + HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ + HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ + HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ + HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ + HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ + +} HAL_I2S_CallbackIDTypeDef; + +/** + * @brief HAL I2S Callback pointer definition + */ +typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +#define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX (0x00000000U) +#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS (0x00000000U) +#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) +#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B (0x00000000U) +#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) +#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K (192000U) +#define I2S_AUDIOFREQ_96K (96000U) +#define I2S_AUDIOFREQ_48K (48000U) +#define I2S_AUDIOFREQ_44K (44100U) +#define I2S_AUDIOFREQ_32K (32000U) +#define I2S_AUDIOFREQ_22K (22050U) +#define I2S_AUDIOFREQ_16K (16000U) +#define I2S_AUDIOFREQ_11K (11025U) +#define I2S_AUDIOFREQ_8K (8000U) +#define I2S_AUDIOFREQ_DEFAULT (2U) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW (0x00000000U) +#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flags_Definition I2S Flags Definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY + +#define I2S_FLAG_MASK (SPI_SR_RXNE\ + | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Enable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Disable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__ specifies the I2S Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + }while(0U) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg_udr = 0x00U;\ + tmpreg_udr = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg_udr); \ + }while(0U) +/** @brief Flush the I2S DR Register. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\ + __IO uint32_t tmpreg_dr = 0x00U;\ + tmpreg_dr = ((__HANDLE__)->Instance->DR);\ + UNUSED(tmpreg_dr); \ + }while(0U) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Macros I2S Private Macros + * @{ + */ + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of I2S SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun error flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_CHSIDE: Channel side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval SET or RESET. + */ +#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ + & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of I2S CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if I2S Mode parameter is in allowed range. + * @param __MODE__ specifies the I2S Mode. + * This parameter can be a value of @ref I2S_Mode + * @retval None + */ +#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX)) + +#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ + ((__STANDARD__) == I2S_STANDARD_MSB) || \ + ((__STANDARD__) == I2S_STANDARD_LSB) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) + +#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_32B)) + +#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ + ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) + +#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ + ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ + ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) + +/** @brief Checks if I2S Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the I2S serial clock steady state. + * This parameter can be a value of @ref I2S_Clock_Polarity + * @retval None + */ +#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ + ((__CPOL__) == I2S_CPOL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_I2S_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda.h new file mode 100644 index 0000000000..ced14ea954 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda.h @@ -0,0 +1,890 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_irda.h + * @author MCD Application Team + * @brief Header file of IRDA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_IRDA_H +#define STM32C0xx_HAL_IRDA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hirda->Init.BaudRate))) + where usart_ker_ckpres is the IRDA input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the IRDA clock source. + This parameter can be a value of @ref IRDA_ClockPrescaler. */ + +} IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State definition + * @note HAL IRDA State value is a combination of 2 different substates: + * gState and RxState (see @ref IRDA_State_Definition). + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA clock sources definition + */ +typedef enum +{ + IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + IRDA_CLOCKSOURCE_LSE = 0x10U, /*!< LSE clock source */ + IRDA_CLOCKSOURCE_UNDEFINED = 0x20U /*!< Undefined clock source */ +} IRDA_ClockSourceTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +typedef struct __IRDA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + uint16_t Mask; /*!< USART RX RDR register mask */ + + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */ + + void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */ + + void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */ + + void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */ + + void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */ + + void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */ + + + void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */ + + void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +} IRDA_HandleTypeDef; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief HAL IRDA Callback ID enumeration definition + */ +typedef enum +{ + HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */ + HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */ + HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */ + HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */ + HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */ + HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */ + HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */ + HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */ + + HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */ + HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */ + +} HAL_IRDA_CallbackIDTypeDef; + +/** + * @brief HAL IRDA Callback pointer definition + */ +typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */ + +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported Constants + * @{ + */ + +/** @defgroup IRDA_State_Definition IRDA State Code Definition + * @{ + */ +#define HAL_IRDA_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_BUSY 0x00000024U /*!< An internal process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between + gState and RxState values */ +#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup IRDA_Error_Definition IRDA Error Code Definition + * @{ + */ +#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +#define HAL_IRDA_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE 0x00000000U /*!< No parity */ +#define IRDA_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX USART_CR1_RE /*!< RX mode */ +#define IRDA_MODE_TX USART_CR1_TE /*!< TX mode */ +#define IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL 0x00000000U /*!< IRDA normal power mode */ +#define IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP /*!< IRDA low power mode */ +/** + * @} + */ + +/** @defgroup IRDA_ClockPrescaler IRDA Clock Prescaler + * @{ + */ +#define IRDA_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define IRDA_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define IRDA_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define IRDA_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define IRDA_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define IRDA_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define IRDA_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define IRDA_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define IRDA_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define IRDA_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define IRDA_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define IRDA_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE 0x00000000U /*!< IRDA disabled */ +#define IRDA_STATE_ENABLE USART_CR1_UE /*!< IRDA enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE 0x00000000U /*!< Associated UART disabled in IRDA mode */ +#define IRDA_MODE_ENABLE USART_CR3_IREN /*!< Associated UART enabled in IRDA mode */ +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disabled */ +#define IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE 0x00000000U /*!< IRDA DMA TX disabled */ +#define IRDA_DMA_TX_ENABLE USART_CR3_DMAT /*!< IRDA DMA TX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE 0x00000000U /*!< IRDA DMA RX disabled */ +#define IRDA_DMA_RX_ENABLE USART_CR3_DMAR /*!< IRDA DMA RX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK USART_ISR_REACK /*!< IRDA receive enable acknowledge flag */ +#define IRDA_FLAG_TEACK USART_ISR_TEACK /*!< IRDA transmit enable acknowledge flag */ +#define IRDA_FLAG_BUSY USART_ISR_BUSY /*!< IRDA busy flag */ +#define IRDA_FLAG_ABRF USART_ISR_ABRF /*!< IRDA auto Baud rate flag */ +#define IRDA_FLAG_ABRE USART_ISR_ABRE /*!< IRDA auto Baud rate error */ +#define IRDA_FLAG_TXE USART_ISR_TXE_TXFNF /*!< IRDA transmit data register empty */ +#define IRDA_FLAG_TC USART_ISR_TC /*!< IRDA transmission complete */ +#define IRDA_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< IRDA read data register not empty */ +#define IRDA_FLAG_ORE USART_ISR_ORE /*!< IRDA overrun error */ +#define IRDA_FLAG_NE USART_ISR_NE /*!< IRDA noise error */ +#define IRDA_FLAG_FE USART_ISR_FE /*!< IRDA frame error */ +#define IRDA_FLAG_PE USART_ISR_PE /*!< IRDA parity error */ +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE 0x0028U /*!< IRDA Parity error interruption */ +#define IRDA_IT_TXE 0x0727U /*!< IRDA Transmit data register empty interruption */ +#define IRDA_IT_TC 0x0626U /*!< IRDA Transmission complete interruption */ +#define IRDA_IT_RXNE 0x0525U /*!< IRDA Read data register not empty interruption */ +#define IRDA_IT_IDLE 0x0424U /*!< IRDA Idle interruption */ + +/* Elements values convention: 000000000XXYYYYYb + - YYYYY : Interrupt source position in the XX register (5bits) + - XX : Interrupt source register (2bits) + - 01: CR1 register + - 10: CR2 register + - 11: CR3 register */ +#define IRDA_IT_ERR 0x0060U /*!< IRDA Error interruption */ + +/* Elements values convention: 0000ZZZZ00000000b + - ZZZZ : Flag position in the ISR register(4bits) */ +#define IRDA_IT_ORE 0x0300U /*!< IRDA Overrun error interruption */ +#define IRDA_IT_NE 0x0200U /*!< IRDA Noise error interruption */ +#define IRDA_IT_FE 0x0100U /*!< IRDA Frame error interruption */ +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + +/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask + * @{ + */ +#define IRDA_IT_MASK 0x001FU /*!< IRDA Interruptions flags mask */ +#define IRDA_CR_MASK 0x00E0U /*!< IRDA control register mask */ +#define IRDA_CR_POS 5U /*!< IRDA control register position */ +#define IRDA_ISR_MASK 0x1F00U /*!< IRDA ISR register mask */ +#define IRDA_ISR_POS 8U /*!< IRDA ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state. + * @param __HANDLE__ IRDA handle. + * @retval None + */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @arg @ref IRDA_CLEAR_IDLEF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag + * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref IRDA_FLAG_BUSY Busy flag + * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag + * @arg @ref IRDA_FLAG_TC Transmission Complete flag + * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag + * @arg @ref IRDA_FLAG_ORE OverRun Error flag + * @arg @ref IRDA_FLAG_NE Noise Error flag + * @arg @ref IRDA_FLAG_FE Framing Error flag + * @arg @ref IRDA_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((__HANDLE__)->Instance->CR3 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ORE OverRun Error interrupt + * @arg @ref IRDA_IT_NE Noise Error interrupt + * @arg @ref IRDA_IT_FE Framing Error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->ISR& (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>>IRDA_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified IRDA interrupt source is enabled or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((((((__INTERRUPT__) & IRDA_CR_MASK) >>IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 :(((((__INTERRUPT__) \ + & IRDA_CR_MASK) >> IRDA_CR_POS)== 0x02U)? (__HANDLE__)->Instance->CR2 :(__HANDLE__)->Instance->CR3)) \ + & (0x01U <<(((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag + * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag + * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag + * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag + * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup IRDA_Private_Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0. + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) + +/** @brief Ensure that IRDA frame parity is valid. + * @param __PARITY__ IRDA frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +/** @brief Ensure that IRDA communication mode is valid. + * @param __MODE__ IRDA communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\ + & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that IRDA power mode is valid. + * @param __MODE__ IRDA power mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +/** @brief Ensure that IRDA clock Prescaler is valid. + * @param __CLOCKPRESCALER__ IRDA clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV256)) + +/** @brief Ensure that IRDA state is valid. + * @param __STATE__ IRDA state mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +/** @brief Ensure that IRDA associated UART/USART mode is valid. + * @param __MODE__ IRDA associated UART/USART mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ + ((__MODE__) == IRDA_MODE_ENABLE)) + +/** @brief Ensure that IRDA sampling rate is valid. + * @param __ONEBIT__ IRDA sampling rate. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that IRDA DMA TX mode is valid. + * @param __DMATX__ IRDA DMA TX mode. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +/** @brief Ensure that IRDA DMA RX mode is valid. + * @param __DMARX__ IRDA DMA RX mode. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +/** @brief Ensure that IRDA request is valid. + * @param __PARAM__ IRDA request. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Include IRDA HAL Extended module */ +#include "stm32c0xx_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ + +/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_IRDA_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda_ex.h new file mode 100644 index 0000000000..bd05d5f226 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_irda_ex.h @@ -0,0 +1,176 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_irda_ex.h + * @author MCD Application Team + * @brief Header file of IRDA HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_IRDA_EX_H +#define STM32C0xx_HAL_IRDA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup IRDAEx IRDAEx + * @brief IRDA Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants + * @{ + */ + +/** @defgroup IRDAEx_Word_Length IRDAEx Word Length + * @{ + */ +#define IRDA_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long frame */ +#define IRDA_WORDLENGTH_8B 0x00000000U /*!< 8-bit long frame */ +#define IRDA_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long frame */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros + * @{ + */ + +/** @brief Report the IRDA clock source. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval IRDA clocking source, written in __CLOCKSOURCE__. + */ +#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSIKER: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + +/** @brief Compute the mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define IRDA_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** @brief Ensure that IRDA frame length is valid. + * @param __LENGTH__ IRDA frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_9B)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_IRDA_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_iwdg.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_iwdg.h new file mode 100644 index 0000000000..2eb7fbc0c2 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_iwdg.h @@ -0,0 +1,237 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_IWDG_H +#define STM32C0xx_HAL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup IWDG IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Types IWDG Exported Types + * @{ + */ + +/** + * @brief IWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Select the prescaler of the IWDG. + This parameter can be a value of @ref IWDG_Prescaler */ + + uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + + uint32_t Window; /*!< Specifies the window value to be compared to the down-counter. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + +} IWDG_InitTypeDef; + +/** + * @brief IWDG Handle Structure definition + */ +typedef struct +{ + IWDG_TypeDef *Instance; /*!< Register base address */ + + IWDG_InitTypeDef Init; /*!< IWDG required parameters */ +} IWDG_HandleTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_Prescaler IWDG Prescaler + * @{ + */ +#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */ +#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */ +#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */ +#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */ +#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */ +#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */ +#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */ +/** + * @} + */ + +/** @defgroup IWDG_Window_option IWDG Window option + * @{ + */ +#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the IWDG peripheral. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) + +/** + * @brief Reload IWDG counter with value defined in the reload register + * (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled). + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Functions IWDG Exported Functions + * @{ + */ + +/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions + * @{ + */ +/* Initialization/Start functions ********************************************/ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_Private_Constants IWDG Private Constants + * @{ + */ + +/** + * @brief IWDG Key Register BitMask + */ +#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */ +#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */ +#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */ +#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Macros IWDG Private Macros + * @{ + */ + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) + +/** + * @brief Check IWDG prescaler value. + * @param __PRESCALER__ IWDG prescaler value + * @retval None + */ +#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ + ((__PRESCALER__) == IWDG_PRESCALER_8) || \ + ((__PRESCALER__) == IWDG_PRESCALER_16) || \ + ((__PRESCALER__) == IWDG_PRESCALER_32) || \ + ((__PRESCALER__) == IWDG_PRESCALER_64) || \ + ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_256)) + +/** + * @brief Check IWDG reload value. + * @param __RELOAD__ IWDG reload value + * @retval None + */ +#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL) + +/** + * @brief Check IWDG window value. + * @param __WINDOW__ IWDG window value + * @retval None + */ +#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN) + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_IWDG_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr.h new file mode 100644 index 0000000000..5b9ecafa63 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr.h @@ -0,0 +1,273 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_PWR_H +#define STM32C0xx_HAL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_WakeUp_Pins PWR WakeUp pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */ +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */ +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */ +#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */ +#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */ +#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */ +#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */ +#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */ +#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */ +/** + * @} + */ + +/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection + * @{ + */ +#define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */ +#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */ +#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0x00000000u) /*!< Regulator in main mode */ + +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01u) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02u) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + + +/** @defgroup PWREx_Flag PWR Status Flags + * @brief Elements values convention: 0000 00XX 000Y YYYYb + * - Y YYYY : Flag position in the XX register (5 bits) + * - XX : Status register (2 bits) + * - 01: SR1 register + * - 10: SR2 register + * The only exception is PWR_FLAG_WU, encompassing all + * wake-up flags and set to PWR_SR1_WUF. + * @{ + */ +#define PWR_FLAG_WUF1 (0x00010000u | PWR_SR1_WUF1) /*!< Wakeup event on wakeup pin 1 */ +#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */ +#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */ +#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */ +#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */ +#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */ +#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */ +#define PWR_FLAG_WUFI (0x00010000u | PWR_SR1_WUFI) /*!< Wakeup on internal wakeup line */ +#define PWR_FLAG_FLASH_READY (0x00020000u | PWR_SR2_FLASH_RDY) /*!< Flash ready */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_SB: StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg PWR_FLAG_WUFI: Wake-Up Flag Internal. Set when a wakeup is + * detected on the internal wakeup line. + * OR a combination of following values: + * @arg PWR_FLAG_FLASH_READY: Flash is ready. Indicates whether flash + * can be used or not + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\ + ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == \ + ((__FLAG__) & ~0x00030000u)) :\ + ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == \ + ((__FLAG__) & ~0x00030000u))) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be a combination of following values: + * @arg PWR_FLAG_WUF1: Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg PWR_FLAG_WUF2: Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg PWR_FLAG_WUF4: Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg PWR_FLAG_WUF6: Wake Up Flag 6. Indicates that a wakeup event + * was received from the WKUP pin 6. + * @arg PWR_FLAG_SB: Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->SCR = (__FLAG__)) + +/** + * @} + */ + +/* Private constants-------------------------------------------------------*/ +/** @defgroup PWREx_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x08u /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ +#define IS_PWR_WAKEUP_PIN(PIN) ((((PIN) & ((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) != 0x00000000u) && \ + (((PIN) & ~((PWR_CR4_WP << 8U) | (PWR_CR3_EWUP))) == 0x00000000u)) + +#define IS_PWR_REGULATOR(REGULATOR) ((REGULATOR) == PWR_MAINREGULATOR_ON) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \ + ((ENTRY) == PWR_STOPENTRY_WFE)) +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32c0xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_PWR_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr_ex.h new file mode 100644 index 0000000000..33fc1ec050 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr_ex.h @@ -0,0 +1,188 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_PWR_EX_H +#define STM32C0xx_HAL_PWR_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ + +/** @defgroup PWREx_GPIO_Pin_Mask PWR Extended GPIO Pin Mask + * @{ + */ +#define PWR_GPIO_BIT_0 (0x0001U) /*!< GPIO port I/O pin 0 */ +#define PWR_GPIO_BIT_1 (0x0002U) /*!< GPIO port I/O pin 1 */ +#define PWR_GPIO_BIT_2 (0x0004U) /*!< GPIO port I/O pin 2 */ +#define PWR_GPIO_BIT_3 (0x0008U) /*!< GPIO port I/O pin 3 */ +#define PWR_GPIO_BIT_4 (0x0010U) /*!< GPIO port I/O pin 4 */ +#define PWR_GPIO_BIT_5 (0x0020U) /*!< GPIO port I/O pin 5 */ +#define PWR_GPIO_BIT_6 (0x0040U) /*!< GPIO port I/O pin 6 */ +#define PWR_GPIO_BIT_7 (0x0080U) /*!< GPIO port I/O pin 7 */ +#define PWR_GPIO_BIT_8 (0x0100U) /*!< GPIO port I/O pin 8 */ +#define PWR_GPIO_BIT_9 (0x0200U) /*!< GPIO port I/O pin 9 */ +#define PWR_GPIO_BIT_10 (0x0400U) /*!< GPIO port I/O pin 10 */ +#define PWR_GPIO_BIT_11 (0x0800U) /*!< GPIO port I/O pin 11 */ +#define PWR_GPIO_BIT_12 (0x1000U) /*!< GPIO port I/O pin 12 */ +#define PWR_GPIO_BIT_13 (0x2000U) /*!< GPIO port I/O pin 13 */ +#define PWR_GPIO_BIT_14 (0x4000U) /*!< GPIO port I/O pin 14 */ +#define PWR_GPIO_BIT_15 (0x8000U) /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWREx_Backup_Registers PWREx Backup Registers Definition + * @{ + */ +#define PWR_BKP_NUMBER 4U +#define PWR_BKP_DR0 0x00U +#define PWR_BKP_DR1 0x01U +#define PWR_BKP_DR2 0x02U +#define PWR_BKP_DR3 0x03U +/** + * @} + */ + +/** @defgroup PWREx_GPIO_Port GPIO Port + * @{ + */ +#define PWR_GPIO_A (0x00000000u) /*!< GPIO port A */ +#define PWR_GPIO_B (0x00000001u) /*!< GPIO port B */ +#define PWR_GPIO_C (0x00000002u) /*!< GPIO port C */ +#if defined(STM32C031xx) +#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */ +#endif /* STM32C031xx */ +#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */ +/** + * @} + */ + +/** @defgroup PWREx_Flash_PowerDown Flash Power Down modes + * @{ + */ +#define PWR_FLASHPD_SLEEP PWR_CR1_FPD_SLP /*!< Enable Flash power down in sleep mode */ +#define PWR_FLASHPD_STOP PWR_CR1_FPD_STOP /*!< Enable Flash power down in stop mode */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_GPIO_BIT_NUMBER(__BIT_NUMBER__) ((((__BIT_NUMBER__) & 0x0000FFFFu) != 0x00u) && \ + (((__BIT_NUMBER__) & 0xFFFF0000u) == 0x00u)) +#if defined(STM32C031xx) +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_D) || \ + ((__GPIO__) == PWR_GPIO_F)) +#elif defined (STM32C011xx) +#define IS_PWR_GPIO(__GPIO__) (((__GPIO__) == PWR_GPIO_A) || \ + ((__GPIO__) == PWR_GPIO_B) || \ + ((__GPIO__) == PWR_GPIO_C) || \ + ((__GPIO__) == PWR_GPIO_F)) + +#endif /* STM32C031xx */ +#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_SLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \ + (((__MODE__) & ~(PWR_FLASHPD_SLEEP | PWR_FLASHPD_STOP)) == 0x00u)) + +#define IS_PWR_BKP(__BKP__) ((__BKP__) < PWR_BKP_NUMBER) + + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode); +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode); +void HAL_PWREx_BKUPWrite(uint32_t BackupRegister, uint16_t Data); +uint32_t HAL_PWREx_BKUPRead(uint32_t BackupRegister); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnterSHUTDOWNMode(void); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_PWR_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc.h new file mode 100644 index 0000000000..0fd268cd89 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc.h @@ -0,0 +1,1731 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_RCC_H +#define STM32C0xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" +#include "stm32c0xx_ll_rcc.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCC_Private_Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define CSR1_REG_INDEX 2U +#define CSR2_REG_INDEX 3U + +#define RCC_FLAG_MASK 0x1FU + +/* Define used for IS_RCC_CLOCKTYPE() */ +#define RCC_CLOCKTYPE_ALL (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1) /*!< All clocktype to configure */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)127U) + +#define IS_RCC_HSIDIV(__DIV__) (((__DIV__) == RCC_HSI_DIV1) || ((__DIV__) == RCC_HSI_DIV2) || \ + ((__DIV__) == RCC_HSI_DIV4) || ((__DIV__) == RCC_HSI_DIV8) || \ + ((__DIV__) == RCC_HSI_DIV16) || ((__DIV__) == RCC_HSI_DIV32)|| \ + ((__DIV__) == RCC_HSI_DIV64) || ((__DIV__) == RCC_HSI_DIV128)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + + +#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__)\ + & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI)) + +#define IS_RCC_SYSCLK(SYSCLK) ((SYSCLK) == RCC_SYSCLK_DIV1) + +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_HCLK_DIV1) || ((HCLK) == RCC_HCLK_DIV2) || \ + ((HCLK) == RCC_HCLK_DIV4) || ((HCLK) == RCC_HCLK_DIV8) || \ + ((HCLK) == RCC_HCLK_DIV16) || ((HCLK) == RCC_HCLK_DIV64) || \ + ((HCLK) == RCC_HCLK_DIV128) || ((HCLK) == RCC_HCLK_DIV256) || \ + ((HCLK) == RCC_HCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_APB1_DIV1) || ((__PCLK__) == RCC_APB1_DIV2) || \ + ((__PCLK__) == RCC_APB1_DIV4) || ((__PCLK__) == RCC_APB1_DIV8) || \ + ((__PCLK__) == RCC_APB1_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#if defined(STM32C011xx) +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1_PA8) || \ + ((__MCOX__) == RCC_MCO1_PA9) || \ + ((__MCOX__) == RCC_MCO1_PF2) || \ + ((__MCOX__) == RCC_MCO2_PA8) || \ + ((__MCOX__) == RCC_MCO2_PA10) || \ + ((__MCOX__) == RCC_MCO2_PA14)) +#elif defined(STM32C031xx) +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1_PA8) || \ + ((__MCOX__) == RCC_MCO1_PA9) || \ + ((__MCOX__) == RCC_MCO1_PF2) || \ + ((__MCOX__) == RCC_MCO2_PA8) || \ + ((__MCOX__) == RCC_MCO2_PA10) || \ + ((__MCOX__) == RCC_MCO2_PA14) || \ + ((__MCOX__) == RCC_MCO2_PA15) || \ + ((__MCOX__) == RCC_MCO2_PB2)) +#endif +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) + +#define IS_RCC_MCO2SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO2SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO2SOURCE_LSE)) + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)|| ((__DIV__) == RCC_MCODIV_32) || \ + ((__DIV__) == RCC_MCODIV_64)|| ((__DIV__) == RCC_MCODIV_128)) + +#define IS_RCC_MCO2DIV(__DIV__) (((__DIV__) == RCC_MCO2DIV_1) || ((__DIV__) == RCC_MCO2DIV_2) || \ + ((__DIV__) == RCC_MCO2DIV_4) || ((__DIV__) == RCC_MCO2DIV_8) || \ + ((__DIV__) == RCC_MCO2DIV_16)|| ((__DIV__) == RCC_MCO2DIV_32) || \ + ((__DIV__) == RCC_MCO2DIV_64)|| ((__DIV__) == RCC_MCO2DIV_128)) + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSIDiv; /*!< The division factor of the HSI48. + This parameter can be a value of @ref RCC_HSI_Div */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + +} RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a combination of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t SYSCLKDivider; /*!< The system clock divider. This parameter can be + a value of @ref RCC_SYS_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_HCLK_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_Clock_Source */ + + +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_CSR1_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS ((uint32_t)(RCC_CSR1_LSEBYP | RCC_CSR1_LSEON)) /*!< External clock source for LSE clock */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ +#define RCC_HSICALIBRATION_DEFAULT 64U /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Div HSI Div + * @{ + */ +#define RCC_HSI_DIV1 0x00000000U /*!< HSI clock is not divided */ +#define RCC_HSI_DIV2 RCC_CR_HSIDIV_0 /*!< HSI clock is divided by 2 */ +#define RCC_HSI_DIV4 RCC_CR_HSIDIV_1 /*!< HSI clock is divided by 4 */ +#define RCC_HSI_DIV8 (RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 8 */ +#define RCC_HSI_DIV16 RCC_CR_HSIDIV_2 /*!< HSI clock is divided by 16 */ +#define RCC_HSI_DIV32 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 32 */ +#define RCC_HSI_DIV64 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1) /*!< HSI clock is divided by 64 */ +#define RCC_HSI_DIV128 (RCC_CR_HSIDIV_2|RCC_CR_HSIDIV_1|RCC_CR_HSIDIV_0) /*!< HSI clock is divided by 128 */ +/** + * @} + */ + + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR2_LSION /*!< LSI clock activation */ +/** + * @} + */ + + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection as system clock */ +#define RCC_SYSCLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_SYS_Clock_Source RCC SYS Clock Sourcee + * @{ + */ +#define RCC_SYSCLK_DIV1 0x00000000U /*!< SYSCLK not divided */ + +/** + * @} + */ + +/** @defgroup RCC_HCLK_Clock_Source RCC HCLK Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 0x00000000U /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_HPRE_3 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 16 */ +#define RCC_HCLK_DIV64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< HCLK divided by 64 */ +#define RCC_HCLK_DIV128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 128 */ +#define RCC_HCLK_DIV256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< HCLK divided by 256 */ +#define RCC_HCLK_DIV512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source + * @{ + */ +#define RCC_APB1_DIV1 0x00000000U /*!< APB not divided */ +#define RCC_APB1_DIV2 RCC_CFGR_PPRE_2 /*!< APB divided by 2 */ +#define RCC_APB1_DIV4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< APB divided by 4 */ +#define RCC_APB1_DIV8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< APB divided by 4 */ +#define RCC_APB1_DIV16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< APB divided by 16 */ + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock configured for RTC */ +#define RCC_RTCCLKSOURCE_LSE RCC_CSR1_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_CSR1_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_CSR1_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ + +/* @cond */ +/* 32 28 20 16 0 + -------------------------------- + | MCO | GPIO | GPIO | GPIO | + | Index | AF | Port | Pin | + -------------------------------*/ + +#define RCC_MCO_GPIOPORT_POS 16U +#define RCC_MCO_GPIOPORT_MASK (0xFUL << RCC_MCO_GPIOPORT_POS) +#define RCC_MCO_GPIOAF_POS 20U +#define RCC_MCO_GPIOAF_MASK (0xFFUL << RCC_MCO_GPIOAF_POS) +#define RCC_MCO_INDEX_POS 28U +#define RCC_MCO_INDEX_MASK (0x1UL << RCC_MCO_INDEX_POS) + +#define RCC_MCO1_INDEX (0x0UL << RCC_MCO_INDEX_POS) /*!< MCO1 index */ +#define RCC_MCO2_INDEX (0x1UL << RCC_MCO_INDEX_POS) /*!< MCO2 index */ +/* @endcond */ + +#define RCC_MCO1_PA8 (RCC_MCO1_INDEX |\ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8) +#define RCC_MCO1_PA9 (RCC_MCO1_INDEX |\ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_9) +#define RCC_MCO1_PF2 (RCC_MCO1_INDEX |\ + (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOF) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_2) +#define RCC_MCO1 RCC_MCO1_PA8 /*!< Alias for compatibility */ + +#define RCC_MCO2_PA8 (RCC_MCO2_INDEX |\ + (GPIO_AF15_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8) +#define RCC_MCO2_PA10 (RCC_MCO2_INDEX |\ + (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_10) +#define RCC_MCO2_PA14 (RCC_MCO2_INDEX |\ + (GPIO_AF11_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_14) +#if defined(STM32C031xx) +#define RCC_MCO2_PA15 (RCC_MCO2_INDEX |\ + (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_15) +#define RCC_MCO2_PB2 (RCC_MCO2_INDEX |\ + (GPIO_AF3_MCO2 << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOB) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_2) +#endif +#define RCC_MCO2 RCC_MCO2_PA10 /*!< Alias for compatibility */ + +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 1 MCO*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source + * @{ + */ +#define RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO2 output disabled, no clock on MCO2 */ +#define RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#define RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_0| RCC_CFGR_MCO2SEL_1) /*!< HSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_2) /*!< LSI selection as MCO2 source */ +#define RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_0|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_2) /*!< LSE selection as MCO2 source */ +/** + * @} + */ +/** @defgroup RCC_MCO1_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 0x00000000U /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ +#define RCC_MCODIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 32 */ +#define RCC_MCODIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO divided by 64 */ +#define RCC_MCODIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_MCO2_Clock_Prescaler MCO2 Clock Prescaler + * @{ + */ +#define RCC_MCO2DIV_1 0x00000000U /*!< MCO not divided */ +#define RCC_MCO2DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO divided by 2 */ +#define RCC_MCO2DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO divided by 4 */ +#define RCC_MCO2DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO divided by 8 */ +#define RCC_MCO2DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO divided by 16 */ +#define RCC_MCO2DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO divided by 32 */ +#define RCC_MCO2DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO divided by 64 */ +#define RCC_MCO2DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: CSR1 register + * - 011: CSR2 register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ + +/* Flags in the CSR1 register */ +#define RCC_FLAG_LSERDY ((CSR1_REG_INDEX << 5U) | RCC_CSR1_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((CSR1_REG_INDEX << 5U) | RCC_CSR1_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR2 register */ +#define RCC_FLAG_LSIRDY ((CSR2_REG_INDEX << 5U) | RCC_CSR2_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_OBLRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_PWRRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_PWRRSTF_Pos) /*!< BOR or POR/PDR reset flag */ +#define RCC_FLAG_SFTRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR2_REG_INDEX << 5U) | RCC_CSR2_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_CSR1_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_CSR1_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_CSR1_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enable_Disable IOPORT Clock Enable Disable + * @brief Enable or disable the IO Ports clock. + * @note After reset, the IO ports clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0U) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0U) +#endif +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) +#endif +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) +#define __HAL_RCC_WWDG_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) +#define __HAL_RCC_DBGMCU_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) +/** + * @} + */ +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0U) + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \ + UNUSED(tmpreg); \ + } while(0U) + + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) + +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enabled_Disabled_Status AHB Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) != RESET) +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) != RESET) + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) == RESET) +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Enabled_Disabled_Status IOPORT Clock Enabled or Disabled Status + * @brief Check whether the IO Port clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) != RESET) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) != RESET) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) != RESET) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) != RESET) +#endif +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) != RESET) + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) == RESET) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN) == RESET) +#endif +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enabled_Disabled_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) != 0U) +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) != 0U) +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) != 0U) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) != 0U) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) != 0U) +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) != 0U) +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) != 0U) + +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN) == 0U) +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN) == 0U) +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN) == 0U) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN) == 0U) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN) == 0U) +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN) == 0U) +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enabled_Disabled_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) != 0U) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) != 0U) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) != 0U) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) != 0U) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) != 0U) + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN) == 0U) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN) == 0U) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN) == 0U) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN) == 0U) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN) == 0U) + +/** + * @} + */ + + +/** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB_FORCE_RESET() WRITE_REG(RCC->AHBRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) + +#define __HAL_RCC_AHB_RELEASE_RESET() WRITE_REG(RCC->AHBRSTR, 0x00000000U) +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_DMA1RST) +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_FLASHRST) +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, RCC_AHBRSTR_CRCRST) + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Force_Release_Reset IOPORT Force Release Reset + * @brief Force or release IO Port reset. + * @{ + */ +#define __HAL_RCC_IOP_FORCE_RESET() WRITE_REG(RCC->IOPRSTR, 0xFFFFFFFFU) +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#endif +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +#define __HAL_RCC_IOP_RELEASE_RESET() WRITE_REG(RCC->IOPRSTR, 0x00000000U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOCRST) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIODRST) +#endif +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, RCC_IOPRSTR_GPIOFRST) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() WRITE_REG(RCC->APBRSTR1, 0xFFFFFFFFU) + +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_DBGMCU_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) + +#define __HAL_RCC_APB1_RELEASE_RESET() WRITE_REG(RCC->APBRSTR1, 0x00000000U) +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_TIM3RST) +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_USART2RST) +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_I2C1RST) +#define __HAL_RCC_DBGMCU_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_DBGRST) +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR1, RCC_APBRSTR1_PWRRST) + +/** + * @} + */ +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APBRSTR2, 0xFFFFFFFFU) +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APBRSTR2, 0x00000000U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SYSCFGRST) +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM1RST) +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_SPI1RST) +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_USART1RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM14RST) +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_TIM17RST) +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->APBRSTR2, RCC_APBRSTR2_ADCRST) +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable AHB Peripherals Clock Sleep Enable Disable + * @brief Enable or disable the AHB peripherals clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) +#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable IOPORT Clock Sleep Enable Disable + * @brief Enable or disable the IOPORT clock during Low Power (Sleep) mode. + * @note IOPORT clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#endif +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) +#endif +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) + +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) +#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) + +/** + * @} + */ +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) + +/** + * @} + */ + + +/** @defgroup RCC_AHB_Clock_Sleep_Enabled_Disabled_Status AHB Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) != RESET) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN)!= RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) != RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) != RESET) + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) == RESET) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_FLASHSMEN) == RESET) +#define __HAL_RCC_SRAM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) == RESET) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) == RESET) + + +/** + * @} + */ + +/** @defgroup RCC_IOPORT_Clock_Sleep_Enabled_Disabled_Status IOPORT Clock Sleep Enabled or Disabled Status + * @brief Check whether the IOPORT clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN)!= RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN)!= RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN)!= RESET) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN)!= RESET) +#endif +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN)!= RESET) + + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) == RESET) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) == RESET) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) == RESET) +#if defined (STM32C031xx) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIODSMEN) == RESET) +#endif +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOFSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enabled_Disabled_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) != RESET) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) != RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) != RESET) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) != RESET) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) != RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) != RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) != RESET) + + +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_TIM3SMEN) == RESET) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_RTCAPBSMEN) == RESET) +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_WWDGSMEN) == RESET) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_USART2SMEN) == RESET) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_I2C1SMEN) == RESET) +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_DBGSMEN) == RESET) +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR1, RCC_APBSMENR1_PWRSMEN) == RESET) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enabled_Disabled_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) != RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) != RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) != RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) != RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) != RESET) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) != RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) != RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) != RESET) + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SYSCFGSMEN) == RESET) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM1SMEN) == RESET) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_SPI1SMEN) == RESET) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_USART1SMEN) == RESET) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM14SMEN) == RESET) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM16SMEN) == RESET) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_TIM17SMEN) == RESET) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APBSMENR2 , RCC_APBSMENR2_ADCSMEN) == RESET) +/** + * @} + */ + + +/** @defgroup RCC_RTC_Domain_Reset RCC RTC Domain Reset + * @{ + */ + +/** @brief Macros to force or release the RTC domain reset. + * @note This function resets the RTC peripheral + * and the RTC clock source selection in RCC_CSR1 register. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->CSR1, RCC_CSR1_RTCRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->CSR1, RCC_CSR1_RTCRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->CSR1, RCC_CSR1_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->CSR1, RCC_CSR1_RTCEN) + +/** + * @} + */ + +/** @defgroup RCC_Clock_Configuration RCC Clock Configuration + * @{ + */ + +/** @brief Macros to enable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macros to disable the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 127. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** @brief Macro to configure the HSISYS clock. + * @param __HSIDIV__ specifies the HSI16 division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_HSI_DIV1 HSI clock source is divided by 1 + * @arg @ref RCC_HSI_DIV2 HSI clock source is divided by 2 + * @arg @ref RCC_HSI_DIV4 HSI clock source is divided by 4 + * @arg @ref RCC_HSI_DIV8 HSI clock source is divided by 8 + * @arg @ref RCC_HSI_DIV16 HSI clock source is divided by 16 + * @arg @ref RCC_HSI_DIV32 HSI clock source is divided by 32 + * @arg @ref RCC_HSI_DIV64 HSI clock source is divided by 64 + * @arg @ref RCC_HSI_DIV128 HSI clock source is divided by 128 + */ +#define __HAL_RCC_HSI_CONFIG(__HSIDIV__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, (__HSIDIV__)) + +/** @brief Macro to get the HSI divider. + * @retval The HSI divider. The returned value can be one + * of the following: + * - RCC_CR_HSIDIV_1 HSI oscillator divided by 1 + * - RCC_CR_HSIDIV_2 HSI oscillator divided by 2 + * - RCC_CR_HSIDIV_4 HSI oscillator divided by 4 (default after reset) + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 8 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 16 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 32 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 64 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 128 + */ +#define __HAL_RCC_GET_HSI_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV))) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR2, RCC_CSR2_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR2, RCC_CSR2_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0U) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->CSR1, RCC_CSR1_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->CSR1, RCC_CSR1_LSEBYP); \ + SET_BIT(RCC->CSR1, RCC_CSR1_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSEON); \ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSEBYP); \ + } \ + } while(0U) +/** + * @} + */ + +/** @addtogroup RCC_RTC_Clock_Configuration + * @{ + */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the RTC domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power RTC Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * RTC domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->CSR1, RCC_CSR1_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->CSR1, RCC_CSR1_RTCSEL))) + +/** + * @} + */ + +/** @addtogroup RCC_Clock_Configuration + * @{ + */ + + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSI LSI oscillator is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_LSE LSE oscillator is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSI LSI used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_STATUS_LSE LSE used as system clock source. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (RCC->CFGR & RCC_CFGR_SWS) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->CSR1, RCC_CSR1_LSEDRV, (uint32_t)(__LSEDRIVE__)) + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO2SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO sourcee + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO2DIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCO2DIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCO2DIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCO2DIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCO2DIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCO2DIV_32 MCO clock source is divided by 32 + * @arg @ref RCC_MCO2DIV_64 MCO clock source is divided by 64 + * @arg @ref RCC_MCO2DIV_128 MCO clock source is divided by 128 + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) +/** + * @} + */ +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PWRRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR2 |= RCC_CSR2_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + * @arg @ref RCC_FLAG_PWRRST BOR or POR/PDR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == CSR1_REG_INDEX) ? RCC->CSR1 : \ + ((((__FLAG__) >> 5U) == CSR2_REG_INDEX) ? RCC->CSR2 : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) \ + ? 1U : 0U) + +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32c0xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_EnableLSECSS(void); +void HAL_RCC_DisableLSECSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* LSE & HSE CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); +void HAL_RCC_LSECSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_RCC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc_ex.h new file mode 100644 index 0000000000..9161dce509 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rcc_ex.h @@ -0,0 +1,384 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_RCC_EX_H +#define STM32C0xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t HSIKerClockDivider; /*!< Specifies HSI Kernel divider. + This parameter can be a value of @ref RCCEx_HSIKER_Div */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + + uint32_t I2s1ClockSelection; /*!< Specifies I2S1 clock source + This parameter can be a value of @ref RCCEx_I2S1_Clock_Source */ + + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ + + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +} RCC_PeriphCLKInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_CSR1_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#define RCC_PERIPHCLK_I2C1 0x00000040U +#define RCC_PERIPHCLK_I2S1 0x00000800U +#define RCC_PERIPHCLK_ADC 0x00004000U +#define RCC_PERIPHCLK_RTC 0x00020000U +#define RCC_PERIPHCLK_HSIKER 0x80000000U + +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source RCC USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART 1 clock */ +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK clock selected as USART 1 clock */ +#define RCC_USART1CLKSOURCE_HSIKER RCC_CCIPR_USART1SEL_1 /*!< HSI Kernel clock selected as USART 1 clock */ +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) /*!< LSE clock selected as USART 1 clock */ +/** + * @} + */ + + +/** @defgroup RCCEx_I2C1_Clock_Source RCC I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock selected as I2C1 clock */ +#define RCC_I2C1CLKSOURCE_HSIKER RCC_CCIPR_I2C1SEL_1 /*!< HSI Kernel clock selected as I2C1 clock */ +/** + * @} + */ + +/** @defgroup RCCEx_I2S1_Clock_Source RCC I2S1 Clock Source + * @{ + */ +#define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_HSIKER RCC_CCIPR_I2S1SEL_1 /*!< HSI Kernel clock selected as I2S1 clock */ +#define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ + +/** + * @} + */ + + +/** @defgroup RCCEx_ADC_Clock_Source RCC ADC Clock Source + * @{ + */ + +#define RCC_ADCCLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define RCC_ADCCLKSOURCE_HSIKER RCC_CCIPR_ADCSEL_1 /*!< HSI kernel used as ADC clock */ +/** + * @} + */ + +/** @defgroup RCCEx_HSIKER_Div HSIKER Div + * @{ + */ +#define RCC_HSIKER_DIV1 0x00000000U /*!< HSI Kernek clock is not divided */ +#define RCC_HSIKER_DIV2 RCC_CR_HSIKERDIV_0 /*!< HSI Kernel clock is divided by 2 */ +#define RCC_HSIKER_DIV3 RCC_CR_HSIKERDIV_1 /*!< HSI Kernel clock is divided by 3 */ +#define RCC_HSIKER_DIV4 (RCC_CR_HSIKERDIV_1|RCC_CR_HSIKERDIV_0) /*!< HSI Kernel clock is divided by 4 */ +#define RCC_HSIKER_DIV5 RCC_CR_HSIKERDIV_2 /*!< HSI Kernel clock is divided by 5 */ +#define RCC_HSIKER_DIV6 (RCC_CR_HSIKERDIV_2|RCC_CR_HSIKERDIV_0) /*!< HSI Kernel clock is divided by 6 */ +#define RCC_HSIKER_DIV7 (RCC_CR_HSIKERDIV_2|RCC_CR_HSIKERDIV_1) /*!< HSI Kernel clock is divided by 7 */ +#define RCC_HSIKER_DIV8 (RCC_CR_HSIKERDIV_2|RCC_CR_HSIKERDIV_1|RCC_CR_HSIKERDIV_0) /*!< HSI Kernel clock is divided by 8 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSIKER HSI Kernel selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_HSIKER HSI Kernel selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))) + +/** @brief Macro to configure the I2S1 clock (I2S1CLK). + * + * @param __I2S1_CLKSOURCE__ specifies the I2S1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSIKER HSI Kernel Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) + +/** @brief Macro to get the I2S1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_HSIKER HSI Kernel Clock selected as I2S1 clock + * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock + */ +#define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2S1SEL))) + + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSIKER HSI Kernel selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSIKER HSI Kernel selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))) + +/** @brief Macro to configure the ADC interface clock + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSIKER HSI Kernel Clock selected as ADC clock + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSIKER HSI Kernel Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))) + +/** @brief Macro to configure the HSIKER clock. + * @param __HSIKERDIV__ specifies the HSI Kernel division factor. + * This parameter can be one of the following values: + * @arg @ref RCC_HSIKER_DIV1 HSI clock source is divided by 1 + * @arg @ref RCC_HSIKER_DIV2 HSI clock source is divided by 2 + * @arg @ref RCC_HSIKER_DIV3 HSI clock source is divided by 3 + * @arg @ref RCC_HSIKER_DIV4 HSI clock source is divided by 4 + * @arg @ref RCC_HSIKER_DIV5 HSI clock source is divided by 5 + * @arg @ref RCC_HSIKER_DIV6 HSI clock source is divided by 6 + * @arg @ref RCC_HSIKER_DIV7 HSI clock source is divided by 7 + * @arg @ref RCC_HSIKER_DIV8 HSI clock source is divided by 8 + */ +#define __HAL_RCC_HSIKER_CONFIG(__HSIKERDIV__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSIKERDIV, (__HSIKERDIV__)) + +/** @brief Macro to get the HSIKER divider. + * @retval The HSI Kernel divider. The returned value can be one + * of the following: + * - RCC_HSIKER_DIV1 HSI oscillator divided by 1 + * - RCC_HSIKER_DIV2 HSI oscillator divided by 2 + * - RCC_HSIKER_DIV3 HSI oscillator divided by 3 (default after reset) + * - RCC_HSIKER_DIV4 HSI oscillator divided by 4 + * - RCC_HSIKER_DIV5 HSI oscillator divided by 5 + * - RCC_HSIKER_DIV6 HSI oscillator divided by 6 + * - RCC_HSIKER_DIV7 HSI oscillator divided by 7 + * - RCC_HSIKER_DIV8 HSI oscillator divided by 8 + */ +#define __HAL_RCC_GET_HSIKER_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIKERDIV))) + +/** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + + + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); + +/** + * @} + */ + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_HSIKER) == RCC_PERIPHCLK_HSIKER)) + + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSIKER)) + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSIKER)) + +#define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSIKER) || \ + ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT)) + + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSIKER)) + +#define IS_RCC_HSIKERDIV(__DIV__) (((__DIV__) == RCC_HSIKER_DIV1) || ((__DIV__) == RCC_HSIKER_DIV2) || \ + ((__DIV__) == RCC_HSIKER_DIV3) || ((__DIV__) == RCC_HSIKER_DIV4) || \ + ((__DIV__) == RCC_HSIKER_DIV5) || ((__DIV__) == RCC_HSIKER_DIV6) || \ + ((__DIV__) == RCC_HSIKER_DIV7) || ((__DIV__) == RCC_HSIKER_DIV8)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_RCC_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc.h new file mode 100644 index 0000000000..41f999b627 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc.h @@ -0,0 +1,899 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_RTC_H +#define STM32C0xx_HAL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ + +} HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTCEx_Output_selection_Definitions */ + + uint32_t OutPutRemap; /*!< Specifies the remap for RTC output. + This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ + + uint32_t OutPutPullUp; /*!< Specifies the RTC Output Pull-Up mode. + This parameter can be a value of @ref RTC_Output_PullUp_ALARM_OUT */ +} RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous pre-scaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ + + uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment. + This parameter can be a value of @ref RTC_DayLightSaving_Definitions */ + + uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BKP bit + in CR register to store the operation. + This parameter can be a value of @ref RTC_StoreOperation_Definitions */ +} RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +} RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm . + This parameter can be a value of @ref RTC_Alarms_Definitions */ +} RTC_AlarmTypeDef; + +/** + * @brief RTC Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ + + void (* AlarmBEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm B Event callback */ + + void (* TimeStampEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC TimeStamp Event callback */ + + void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ + + void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + +} RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC TimeStamp Event Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ +} HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Hour_Formats RTC Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 0x00000000u +#define RTC_HOURFORMAT_12 RTC_CR_FMT +/** + * @} + */ + +/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition + * @{ + */ +#define RTC_OUTPUT_DISABLE 0x00000000u +#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 + +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH 0x00000000u +#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT + * @{ + */ +#define RTC_OUTPUT_TYPE_PUSHPULL 0x00000000u +#define RTC_OUTPUT_TYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE +/** + * @} + */ + +/** @defgroup RTC_Output_PullUp_ALARM_OUT RTC Output Pull-Up ALARM OUT + * @{ + */ +#define RTC_OUTPUT_PULLUP_NONE 0x00000000u +#define RTC_OUTPUT_PULLUP_ON RTC_CR_TAMPALRM_PU +/** + * @} + */ + +/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap + * @{ + */ +#define RTC_OUTPUT_REMAP_NONE 0x00000000u +#define RTC_OUTPUT_REMAP_POS1 RTC_CR_OUT2EN +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM ((uint8_t)0x00U) +#define RTC_HOURFORMAT12_PM ((uint8_t)0x01U) +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H +#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H +#define RTC_DAYLIGHTSAVING_NONE 0x00000000u +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions + * @{ + */ +#define RTC_STOREOPERATION_RESET 0x00000000u +#define RTC_STOREOPERATION_SET RTC_CR_BKP +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions + * @{ + */ +#define RTC_FORMAT_BIN 0x00000000u +#define RTC_FORMAT_BCD 0x00000001u +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01U) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U) +#define RTC_MONTH_MARCH ((uint8_t)0x03U) +#define RTC_MONTH_APRIL ((uint8_t)0x04U) +#define RTC_MONTH_MAY ((uint8_t)0x05U) +#define RTC_MONTH_JUNE ((uint8_t)0x06U) +#define RTC_MONTH_JULY ((uint8_t)0x07U) +#define RTC_MONTH_AUGUST ((uint8_t)0x08U) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10U) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12U) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) + +/** + * @} + */ + +/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000u +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL + +/** + * @} + */ + +/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE 0x00000000u +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_NONE | RTC_ALARMMASK_DATEWEEKDAY | \ + RTC_ALARMMASK_HOURS | RTC_ALARMMASK_MINUTES | \ + RTC_ALARMMASK_SECONDS) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE + +/** + * @} + */ + + +/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions + * @{ + */ +#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000u /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 /*!< SS[14:1] not used in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 /*!< SS[14:2] not used in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) /*!< SS[14:3] not used in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 /*!< SS[14:4] not used in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:5] not used in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:6] not used in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) /*!< SS[14:7] not used in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 /*!< SS[14:8] not used in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:9] not used in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:10] not used in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:11] not used in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:12] not used in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14:13] not used in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) /*!< SS[14] not used in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[14:0] are compared and must match + to activate alarm. */ +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions + * @{ + */ +#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ +#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ + +/** + * @} + */ + +/** @defgroup RTC_Flag_Mask RTC Flag Mask (5bits) describe in RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_MASK 0x001Fu /*!< RTC flags mask (5bits) */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions RTC Flags Definitions + * Elements values convention: 000000XX000YYYYYb + * - YYYYY : Interrupt flag position in the XX register (5bits) + * - XX : Interrupt status register (2bits) + * - 01: ICSR register + * - 10: SR or SCR or MISR or SMISR registers + * @{ + */ +#define RTC_FLAG_RECALPF (0x00000100U | RTC_ICSR_RECALPF_Pos) /*!< Recalibration pending Flag */ +#define RTC_FLAG_INITF (0x00000100U | RTC_ICSR_INITF_Pos) /*!< Initialization flag */ +#define RTC_FLAG_RSF (0x00000100U | RTC_ICSR_RSF_Pos) /*!< Registers synchronization flag */ +#define RTC_FLAG_INITS (0x00000100U | RTC_ICSR_INITS_Pos) /*!< Initialization status flag */ +#define RTC_FLAG_SHPF (0x00000100U | RTC_ICSR_SHPF_Pos) /*!< Shift operation pending flag */ +#define RTC_FLAG_ALRAWF (0x00000100U | RTC_ICSR_ALRAWF_Pos) /*!< Alarm A write flag */ +#define RTC_FLAG_ITSF (0x00000200U | RTC_SR_ITSF_Pos) /*!< Internal Time-stamp flag */ +#define RTC_FLAG_TSOVF (0x00000200U | RTC_SR_TSOVF_Pos) /*!< Time-stamp overflow flag */ +#define RTC_FLAG_TSF (0x00000200U | RTC_SR_TSF_Pos) /*!< Time-stamp flag */ +#define RTC_FLAG_ALRAF (0x00000200U | RTC_SR_ALRAF_Pos) /*!< Alarm A flag */ +/** + * @} + */ + +/** @defgroup RTC_Clear_Flags_Definitions RTC Clear Flags Definitions + * @{ + */ +#define RTC_CLEAR_ITSF RTC_SCR_CITSF /*!< Clear Internal Time-stamp flag */ +#define RTC_CLEAR_TSOVF RTC_SCR_CTSOVF /*!< Clear Time-stamp overflow flag */ +#define RTC_CLEAR_TSF RTC_SCR_CTSF /*!< Clear Time-stamp flag */ +#define RTC_CLEAR_ALRAF RTC_SCR_CALRAF /*!< Clear Alarm A flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTC_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__ RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xCAU; \ + (__HANDLE__)->Instance->WPR = 0x53U; \ + } while(0U) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->WPR = 0xFFU; \ + } while(0U) + +/** + * @brief Add 1 hour (summer time change). + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_ADD1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Subtract 1 hour (winter time change). + * @param __HANDLE__ specifies the RTC handle. + * @param __BKP__ Backup + * This parameter can be: + * @arg @ref RTC_STOREOPERATION_RESET + * @arg @ref RTC_STOREOPERATION_SET + * @retval None + */ +#define __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H(__HANDLE__, __BKP__) \ + do { \ + __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__); \ + SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_SUB1H); \ + MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \ + __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__); \ + } while(0); + +/** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt, @ref RTC_Interrupts_Definitions + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->SR\ + )& ((__INTERRUPT__)>> 12U)) != 0U)? 1U : 0U) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg @ref RTC_IT_ALRA Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR)\ + & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Alarms flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to check. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @arg @ref RTC_FLAG_ALRAWF + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) + +/** + * @brief Clear the RTC Alarms pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag sources to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ALRAF)) + +/** + * @brief Enable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on the RTC Alarm associated Exti line. + * @retval None + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Enable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on the RTC Alarm associated Exti line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @} + */ + +/* Include RTC HAL Extended module */ +#include "stm32c0xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); + +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, + pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @{ + */ +/* RTC Time and Date functions ************************************************/ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @{ + */ +/* RTC Alarm functions ********************************************************/ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | \ + RTC_TR_MNT | RTC_TR_MNU| RTC_TR_ST | \ + RTC_TR_SU) +#define RTC_DR_RESERVED_MASK (RTC_DR_YT | RTC_DR_YU | RTC_DR_WDU | \ + RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | \ + RTC_DR_DU) +#define RTC_INIT_MASK 0xFFFFFFFFu +#define RTC_RSF_MASK (~(RTC_ICSR_INIT | RTC_ICSR_RSF)) + +#define RTC_TIMEOUT_VALUE 1000u + +#define RTC_EXTI_LINE_ALARM_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Alarm event */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters + * @{ + */ +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA)) + +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +#define IS_RTC_OUTPUT_PULLUP(TYPE) (((TYPE) == RTC_OUTPUT_PULLUP_NONE) || \ + ((TYPE) == RTC_OUTPUT_PULLUP_ON)) + +#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ + ((REMAP) == RTC_OUTPUT_REMAP_POS1)) + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ + ((PM) == RTC_HOURFORMAT12_PM)) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || \ + ((FORMAT) == RTC_FORMAT_BCD)) + +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99u) + +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1u) && ((MONTH) <= 12u)) + +#define IS_RTC_DATE(DATE) (((DATE) >= 1u) && ((DATE) <= 31u)) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >0u) && ((DATE) <= 31u)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ~(RTC_ALARMMASK_ALL)) == 0U) + +#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A) + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7Fu) + +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFu) + +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0u) && ((HOUR) <= 12u)) + +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23u) + +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59u) + +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59u) + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -------------------------------------------------------------*/ +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +uint8_t RTC_ByteToBcd2(uint8_t Value); +uint8_t RTC_Bcd2ToByte(uint8_t Value); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_RTC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc_ex.h new file mode 100644 index 0000000000..65701099bd --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_rtc_ex.h @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_RTC_EX_H +#define STM32C0xx_HAL_RTC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup RTCEx RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING 0x00000000u +#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE +/** + * @} + */ + +/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection + * @{ + */ +#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u +/** + * @} + */ + + +/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK pulses */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ + +/** + * @} + */ + +/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ 0x00000000u +#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL + +/** + * @} + */ + + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET 0x00000000u +#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/** @brief Clear the specified RTC pending flag. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag + * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag + * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag + * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag + * @retval None + */ +#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR |= (__FLAG__)) + +/** @brief Check whether the specified RTC flag is set or not. + * @param __HANDLE__ specifies the RTC Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be: + * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag + * @arg @ref RTC_FLAG_INITF Initialization flag + * @arg @ref RTC_FLAG_RSF Registers synchronization flag + * @arg @ref RTC_FLAG_INITS Initialization status flag + * @arg @ref RTC_FLAG_SHPF Shift operation pending flag + * @arg @ref RTC_FLAG_ALRAWF Alarm A write flag + * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag + * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag + * @arg @ref RTC_FLAG_TSF Time-stamp flag + * @arg @ref RTC_FLAG_ALRAF Alarm A flag + * @retval None + */ +#define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? ((((__HANDLE__)->Instance->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U) :\ + ((((__HANDLE__)->Instance->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) != 0U) ? 1U : 0U)) + + +/* ---------------------------------TIMESTAMP---------------------------------*/ +/** @defgroup RTCEx_Timestamp RTC Timestamp + * @{ + */ +/** + * @brief Enable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC TimeStamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->SR)\ + & ((__INTERRUPT__)>> 12U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. + * This parameter can be: + * @arg @ref RTC_IT_TS TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR)\ + & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC TimeStamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) + +/** + * @brief Clear the RTC Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_TSF + * @arg @ref RTC_FLAG_TSOVF + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), (__FLAG__))) + +/** + * @brief Enable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable interrupt on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) + +/** + * @brief Disable event on the RTC Timestamp associated Exti line. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) + +/** + * @brief Enable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) + +/** + * @brief Disable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) + +/** + * @brief Get the selected RTC Internal Time Stamps flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) + +/** + * @brief Clear the RTC Internal Time Stamps pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. + * This parameter can be: + * @arg @ref RTC_FLAG_ITSF + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ITSF)) + +/** + * @} + */ + + +/* ------------------------------Calibration----------------------------------*/ +/** @defgroup RTCEx_Calibration RTC Calibration + * @{ + */ + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) + + +/** + * @brief Enable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) + +/** + * @brief Disable the clock reference detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) + + +/** + * @brief Get the selected RTC shift operations flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg @ref RTC_FLAG_SHPF + * @retval None + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/* RTC TimeStamp functions *****************************************/ +/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, + RTC_DateTypeDef *sTimeStampDate, uint32_t Format); +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + + +/* Extended Control functions ************************************************/ +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @{ + */ + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, + uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Extended RTC features functions *******************************************/ +/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions + * @{ + */ + + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Constants RTCEx Private Constants + * @{ + */ +#define RTC_EXTI_LINE_TIMESTAMP_EVENT EXTI_IMR1_IM21 /*!< External interrupt line 19 Connected to the RTC Time Stamp events */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) + + +#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) + + +/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) +/** + * @} + */ + + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) + + + +/** @defgroup RTCEx_Subtract_Fraction_Of_Second_Value RTCEx SubtractFraction Of Second Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) +/** + * @} + */ +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) + +/** + * @} + */ + +/** + * @} + */ + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_RTC_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard.h new file mode 100644 index 0000000000..8d3566ce4e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard.h @@ -0,0 +1,1172 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smartcard.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SMARTCARD_H +#define STM32C0xx_HAL_SMARTCARD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate))) + where usart_ker_ckpres is the USART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter @ref SMARTCARD_Word_Length can only be + set to 9 (8 data + 1 parity bits). */ + + uint32_t StopBits; /*!< Specifies the number of stop bits. + This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ + + uint16_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note The parity is enabled by default (PCE is forced to 1). + Since the WordLength is forced to 8 bits + parity, M is + forced to 1 and the parity bit is the 9th bit. */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote + is selected. Selecting the single sample method increases + the receiver tolerance to clock deviations. This parameter can be a value + of @ref SMARTCARD_OneBit_Sampling. */ + + uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. + This parameter can be any value from 0x01 to 0x1F. Prescaler value is + multiplied by 2 to give the division factor of the source clock frequency */ + + uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ + + uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled + in case of parity error. + This parameter can be a value of @ref SMARTCARD_NACK_Enable */ + + uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. + This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ + + uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: + it is used to implement the Character Wait Time (CWT) and + Block Wait Time (BWT). It is coded over 24 bits. */ + + uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. + This parameter can be any value from 0x0 to 0xFF */ + + uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in + receive and transmit mode). When set to 0, retransmission is + disabled. Otherwise, its maximum value is 7 (before signalling + an error) */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref SMARTCARD_ClockPrescaler. */ + +} SMARTCARD_InitTypeDef; + +/** + * @brief SMARTCARD advanced features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several + advanced features may be initialized at the same time. This parameter + can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Tx_Inv */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Rx_Inv */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref SMARTCARD_Data_Inv */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref SMARTCARD_MSB_First */ + + uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when + relevant flag is available) or once guard time period has elapsed. + This parameter can be a value + of @ref SMARTCARDEx_Transmission_Completion_Indication. */ +} SMARTCARD_AdvFeatureInitTypeDef; + +/** + * @brief HAL SMARTCARD State definition + * @note HAL SMARTCARD State value is a combination of 2 different substates: + * gState and RxState (see @ref SMARTCARD_State_Definition). + * - gState contains SMARTCARD state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_SMARTCARD_StateTypeDef; + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct __SMARTCARD_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. + This parameter can be a value of + @ref SMARTCARDEx_FIFO_mode. */ + + void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global + Handle management and also related to Tx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */ + + void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */ + + void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */ + + void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */ + + void (* RxFifoFullCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Fifo Full Callback */ + + void (* TxFifoEmptyCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */ + + void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +} SMARTCARD_HandleTypeDef; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMARTCARD Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ + HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ + HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ + HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ + HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ + HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ + HAL_SMARTCARD_RX_FIFO_FULL_CB_ID = 0x06U, /*!< SMARTCARD Rx Fifo Full Callback ID */ + HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID = 0x07U, /*!< SMARTCARD Tx Fifo Empty Callback ID */ + + HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ + HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ + +} HAL_SMARTCARD_CallbackIDTypeDef; + +/** + * @brief HAL SMARTCARD Callback pointer definition + */ +typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */ + +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief SMARTCARD clock sources + */ +typedef enum +{ + SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */ +} SMARTCARD_ClockSourceTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants + * @{ + */ + +/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition + * @{ + */ +#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized. Value + is allowed for gState and RxState */ +#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for + use. Value is allowed for gState + and RxState */ +#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception + process is ongoing Not to be used for + neither gState nor RxState. + Value is result of combination (Or) + between gState and RxState values */ +#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */ +#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */ +#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode + * @{ + */ +#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */ +#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */ +#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */ +#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */ +#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ +#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */ +#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable + * @{ + */ +#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */ +#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable + * @{ + */ +#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */ +#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_ClockPrescaler SMARTCARD Clock Prescaler + * @{ + */ +#define SMARTCARD_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define SMARTCARD_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define SMARTCARD_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define SMARTCARD_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define SMARTCARD_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define SMARTCARD_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define SMARTCARD_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define SMARTCARD_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define SMARTCARD_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define SMARTCARD_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define SMARTCARD_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define SMARTCARD_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap + * @{ + */ +#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable + * @{ + */ +#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error + * @{ + */ +#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first + * @{ + */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters + * @{ + */ +#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */ +#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask + * @{ + */ +#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */ +#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */ +#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */ +#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */ +#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + +/** @brief Reset SMARTCARD handle states. + * @param __HANDLE__ SMARTCARD handle. + * @retval None + */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** @brief Flush the Smartcard Data registers. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified SMARTCARD pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the SMARTCARD PE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) + +/** @brief Clear the SMARTCARD FE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) + +/** @brief Clear the SMARTCARD NE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) + +/** @brief Clear the SMARTCARD ORE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) + +/** @brief Clear the SMARTCARD IDLE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) + +/** @brief Check whether the specified Smartcard flag is set or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) + * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_BUSY Busy flag + * @arg @ref SMARTCARD_FLAG_EOBF End of block flag + * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag + * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag + * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag + * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag + * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag + * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag + * @arg @ref SMARTCARD_FLAG_NE Noise error flag + * @arg @ref SMARTCARD_FLAG_FE Framing error flag + * @arg @ref SMARTCARD_FLAG_PE Parity error flag + * @arg @ref SMARTCARD_FLAG_TXFNF TXFIFO not full flag + * @arg @ref SMARTCARD_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref SMARTCARD_FLAG_TXFE TXFIFO Empty flag + * @arg @ref SMARTCARD_FLAG_RXFF RXFIFO Full flag + * @arg @ref SMARTCARD_FLAG_RXFT SMARTCARD RXFIFO threshold flag + * @arg @ref SMARTCARD_FLAG_TXFT SMARTCARD TXFIFO threshold flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before + * guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))):\ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Disable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard + * time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Check whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) (\ + (((__HANDLE__)->Instance->ISR & (0x01UL << (((__INTERRUPT__)\ + & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS)))!= 0U)\ + ? SET : RESET) + +/** @brief Check whether the specified SmartCard interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x01U)?\ + (__HANDLE__)->Instance->CR1 : \ + (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x02U)?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) &\ + (0x01UL << (((uint16_t)(__INTERRUPT__))\ + & SMARTCARD_IT_MASK))) != 0U)\ + ? SET : RESET) + +/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific SMARTCARD request flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request + * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable the USART associated to the SMARTCARD Handle. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros -------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros + * @{ + */ + +/** @brief Report the SMARTCARD clock source. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__. + */ +#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSIKER: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + +/** @brief Check the Baud rate range. + * @note The maximum Baud Rate is derived from the maximum clock on C0 (48 MHz) + * divided by the oversampling used on the SMARTCARD (i.e. 16). + * @param __BAUDRATE__ Baud rate set by the configuration function. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4000001U) + +/** @brief Check the block length range. + * @note The maximum SMARTCARD block length is 0xFF. + * @param __LENGTH__ block length. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) + +/** @brief Check the receiver timeout value. + * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** @brief Check the SMARTCARD autoretry counter value. + * @note The maximum number of retransmissions is 0x7. + * @param __COUNT__ number of retransmissions. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) + +/** @brief Ensure that SMARTCARD frame length is valid. + * @param __LENGTH__ SMARTCARD frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) + +/** @brief Ensure that SMARTCARD frame number of stop bits is valid. + * @param __STOPBITS__ SMARTCARD frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ + ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) + +/** @brief Ensure that SMARTCARD frame parity is valid. + * @param __PARITY__ SMARTCARD frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ + ((__PARITY__) == SMARTCARD_PARITY_ODD)) + +/** @brief Ensure that SMARTCARD communication mode is valid. + * @param __MODE__ SMARTCARD communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that SMARTCARD frame polarity is valid. + * @param __CPOL__ SMARTCARD frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\ + || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) + +/** @brief Ensure that SMARTCARD frame phase is valid. + * @param __CPHA__ SMARTCARD frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) + +/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. + * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) + +/** @brief Ensure that SMARTCARD frame sampling is valid. + * @param __ONEBIT__ SMARTCARD frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that SMARTCARD NACK transmission setting is valid. + * @param __NACK__ SMARTCARD NACK transmission setting. + * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) + */ +#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ + ((__NACK__) == SMARTCARD_NACK_DISABLE)) + +/** @brief Ensure that SMARTCARD receiver timeout setting is valid. + * @param __TIMEOUT__ SMARTCARD receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) + +/** @brief Ensure that SMARTCARD clock Prescaler is valid. + * @param __CLOCKPRESCALER__ SMARTCARD clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_SMARTCARD_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV256)) + +/** @brief Ensure that SMARTCARD advanced features initialization is valid. + * @param __INIT__ SMARTCARD advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ + SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ + SMARTCARD_ADVFEATURE_SWAP_INIT | \ + SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ + SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + +/** @brief Ensure that SMARTCARD frame TX inversion setting is valid. + * @param __TXINV__ SMARTCARD frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX inversion setting is valid. + * @param __RXINV__ SMARTCARD frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame data inversion setting is valid. + * @param __DATAINV__ SMARTCARD frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. + * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) + +/** @brief Ensure that SMARTCARD frame overrun setting is valid. + * @param __OVERRUN__ SMARTCARD frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) + +/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. + * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** @brief Ensure that SMARTCARD frame MSB first setting is valid. + * @param __MSBFIRST__ SMARTCARD frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) + +/** @brief Ensure that SMARTCARD request parameter is valid. + * @param __PARAM__ SMARTCARD request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) + +/** + * @} + */ + +/* Include SMARTCARD HAL Extended module */ +#include "stm32c0xx_hal_smartcard_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARD_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); + +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group4 + * @{ + */ + +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_SMARTCARD_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard_ex.h new file mode 100644 index 0000000000..bf58930f2a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smartcard_ex.h @@ -0,0 +1,335 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smartcard_ex.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SMARTCARD_EX_H +#define STM32C0xx_HAL_SMARTCARD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @addtogroup SMARTCARDEx_Exported_Constants SMARTCARD Extended Exported Constants + * @{ + */ + +/** @defgroup SMARTCARDEx_Transmission_Completion_Indication SMARTCARD Transmission Completion Indication + * @{ + */ +#define SMARTCARD_TCBGT SMARTCARD_IT_TCBGT /*!< SMARTCARD transmission complete before guard time */ +#define SMARTCARD_TC SMARTCARD_IT_TC /*!< SMARTCARD transmission complete (flag raised when guard time has elapsed) */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type + * @{ + */ +#define SMARTCARD_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define SMARTCARD_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define SMARTCARD_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +#define SMARTCARD_ADVFEATURE_TXCOMPLETION 0x00000100U /*!< TX completion indication before of after guard time */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_FIFO_mode SMARTCARD FIFO mode + * @brief SMARTCARD FIFO mode + * @{ + */ +#define SMARTCARD_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define SMARTCARD_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_TXFIFO_threshold_level SMARTCARD TXFIFO threshold level + * @brief SMARTCARD TXFIFO level + * @{ + */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_RXFIFO_threshold_level SMARTCARD RXFIFO threshold level + * @brief SMARTCARD RXFIFO level + * @{ + */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define SMARTCARD_FLAG_TCBGT USART_ISR_TCBGT /*!< SMARTCARD transmission complete before guard time completion */ +#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */ +#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */ +#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */ +#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */ +#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */ +#define SMARTCARD_FLAG_TXE USART_ISR_TXE_TXFNF /*!< SMARTCARD transmit data register empty */ +#define SMARTCARD_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< SMARTCARD TXFIFO not full */ +#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */ +#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD read data register not empty */ +#define SMARTCARD_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD RXFIFO not empty */ +#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */ +#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */ +#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */ +#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */ +#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */ +#define SMARTCARD_FLAG_TXFE USART_ISR_TXFE /*!< SMARTCARD TXFIFO Empty flag */ +#define SMARTCARD_FLAG_RXFF USART_ISR_RXFF /*!< SMARTCARD RXFIFO Full flag */ +#define SMARTCARD_FLAG_RXFT USART_ISR_RXFT /*!< SMARTCARD RXFIFO threshold flag */ +#define SMARTCARD_FLAG_TXFT USART_ISR_TXFT /*!< SMARTCARD TXFIFO threshold flag */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5 bits) + * - XX : Interrupt source register (2 bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5 bits) + * @{ + */ +#define SMARTCARD_IT_PE 0x0028U /*!< SMARTCARD parity error interruption */ +#define SMARTCARD_IT_TXE 0x0727U /*!< SMARTCARD transmit data register empty interruption */ +#define SMARTCARD_IT_TXFNF 0x0727U /*!< SMARTCARD TX FIFO not full interruption */ +#define SMARTCARD_IT_TC 0x0626U /*!< SMARTCARD transmission complete interruption */ +#define SMARTCARD_IT_RXNE 0x0525U /*!< SMARTCARD read data register not empty interruption */ +#define SMARTCARD_IT_RXFNE 0x0525U /*!< SMARTCARD RXFIFO not empty interruption */ +#define SMARTCARD_IT_IDLE 0x0424U /*!< SMARTCARD idle line detection interruption */ + +#define SMARTCARD_IT_ERR 0x0060U /*!< SMARTCARD error interruption */ +#define SMARTCARD_IT_ORE 0x0300U /*!< SMARTCARD overrun error interruption */ +#define SMARTCARD_IT_NE 0x0200U /*!< SMARTCARD noise error interruption */ +#define SMARTCARD_IT_FE 0x0100U /*!< SMARTCARD frame error interruption */ + +#define SMARTCARD_IT_EOB 0x0C3BU /*!< SMARTCARD end of block interruption */ +#define SMARTCARD_IT_RTO 0x0B3AU /*!< SMARTCARD receiver timeout interruption */ +#define SMARTCARD_IT_TCBGT 0x1978U /*!< SMARTCARD transmission complete before guard time completion interruption */ + +#define SMARTCARD_IT_RXFF 0x183FU /*!< SMARTCARD RXFIFO full interruption */ +#define SMARTCARD_IT_TXFE 0x173EU /*!< SMARTCARD TXFIFO empty interruption */ +#define SMARTCARD_IT_RXFT 0x1A7CU /*!< SMARTCARD RXFIFO threshold reached interruption */ +#define SMARTCARD_IT_TXFT 0x1B77U /*!< SMARTCARD TXFIFO threshold reached interruption */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags + * @{ + */ +#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */ +#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */ +#define SMARTCARD_CLEAR_NEF USART_ICR_NECF /*!< SMARTCARD noise error detected clear flag */ +#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */ +#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */ +#define SMARTCARD_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty Clear Flag */ +#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */ +#define SMARTCARD_CLEAR_TCBGTF USART_ICR_TCBGTCF /*!< SMARTCARD transmission complete before guard time completion clear flag */ +#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */ +#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Macros SMARTCARD Extended Private Macros + * @{ + */ + +/** @brief Set the Transmission Completion flag + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if + * AdvancedInit.TxCompletionIndication is not already filled, the latter is forced + * to SMARTCARD_TC (transmission completion indication when guard time has elapsed). + * @retval None + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \ + do { \ + if (HAL_IS_BIT_CLR((__HANDLE__)->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXCOMPLETION)) \ + { \ + (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \ + } \ + else \ + { \ + assert_param(IS_SMARTCARD_TRANSMISSION_COMPLETION((__HANDLE__)->AdvancedInit.TxCompletionIndication)); \ + } \ + } while(0U) + +/** @brief Return the transmission completion flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note Based on AdvancedInit.TxCompletionIndication setting, return TC or TCBGT flag. + * When TCBGT flag (Transmission Complete Before Guard Time) is not available, TC flag is + * reported. + * @retval Transmission completion flag + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) \ + (((__HANDLE__)->AdvancedInit.TxCompletionIndication == SMARTCARD_TC) ? (SMARTCARD_FLAG_TC) : (SMARTCARD_FLAG_TCBGT)) + + +/** @brief Ensure that SMARTCARD frame transmission completion used flag is valid. + * @param __TXCOMPLETE__ SMARTCARD frame transmission completion used flag. + * @retval SET (__TXCOMPLETE__ is valid) or RESET (__TXCOMPLETE__ is invalid) + */ +#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) (((__TXCOMPLETE__) == SMARTCARD_TCBGT) || \ + ((__TXCOMPLETE__) == SMARTCARD_TC)) + +/** @brief Ensure that SMARTCARD FIFO mode is valid. + * @param __STATE__ SMARTCARD FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_SMARTCARD_FIFOMODE_STATE(__STATE__) (((__STATE__) == SMARTCARD_FIFOMODE_DISABLE ) || \ + ((__STATE__) == SMARTCARD_FIFOMODE_ENABLE)) + +/** @brief Ensure that SMARTCARD TXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_8_8)) + +/** @brief Ensure that SMARTCARD RXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation methods *******************************************************/ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group1 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength); +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue); +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions_Group2 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_SMARTCARD_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus.h new file mode 100644 index 0000000000..e63ea09505 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus.h @@ -0,0 +1,789 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smbus.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SMBUS_H +#define STM32C0xx_HAL_SMBUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Types SMBUS Exported Types + * @{ + */ + +/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition + * @brief SMBUS Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value. + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ + uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. + This parameter can be a value of @ref SMBUS_Analog_Filter */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit address. */ + + uint32_t AddressingMode; /*!< Specifies addressing mode selected. + This parameter can be a value of @ref SMBUS_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref SMBUS_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address + if dual addressing mode is selected + This parameter can be a value of @ref SMBUS_own_address2_masks. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref SMBUS_nostretch_mode */ + + uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. + This parameter can be a value of @ref SMBUS_packet_error_check_mode */ + + uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. + This parameter can be a value of @ref SMBUS_peripheral_mode */ + + uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. + (Enable bits and different timeout values) + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ +} SMBUS_InitTypeDef; +/** + * @} + */ + +/** @defgroup HAL_state_definition HAL state definition + * @brief HAL State definition + * @{ + */ +#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */ +#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */ +#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */ +#define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */ +#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ +/** + * @} + */ + +/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition + * @brief SMBUS Error Code definition + * @{ + */ +#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ +#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ +#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ +#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ +#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition + * @brief SMBUS handle Structure definition + * @{ + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +typedef struct __SMBUS_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +{ + I2C_TypeDef *Instance; /*!< SMBUS registers base address */ + + SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ + + uint16_t XferSize; /*!< SMBUS transfer size */ + + __IO uint16_t XferCount; /*!< SMBUS transfer counter */ + + __IO uint32_t XferOptions; /*!< SMBUS transfer options */ + + __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */ + + HAL_LockTypeDef Lock; /*!< SMBUS locking object */ + + __IO uint32_t State; /*!< SMBUS communication state */ + + __IO uint32_t ErrorCode; /*!< SMBUS Error code */ + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Listen Complete callback */ + void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Error callback */ + + void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< SMBUS Slave Address Match callback */ + + void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp Init callback */ + void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp DeInit callback */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +} SMBUS_HandleTypeDef; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMBUS Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ + HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ + HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ + HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */ + + HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */ + HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */ + +} HAL_SMBUS_CallbackIDTypeDef; + +/** + * @brief HAL SMBUS Callback pointer definition + */ +typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); +/*!< pointer to an SMBUS callback function */ +typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an SMBUS Address Match callback function */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants + * @{ + */ + +/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter + * @{ + */ +#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U) +#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup SMBUS_addressing_mode SMBUS addressing mode + * @{ + */ +#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U) +/** + * @} + */ + +/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode + * @{ + */ + +#define SMBUS_DUALADDRESS_DISABLE (0x00000000U) +#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks + * @{ + */ + +#define SMBUS_OA2_NOMASK ((uint8_t)0x00U) +#define SMBUS_OA2_MASK01 ((uint8_t)0x01U) +#define SMBUS_OA2_MASK02 ((uint8_t)0x02U) +#define SMBUS_OA2_MASK03 ((uint8_t)0x03U) +#define SMBUS_OA2_MASK04 ((uint8_t)0x04U) +#define SMBUS_OA2_MASK05 ((uint8_t)0x05U) +#define SMBUS_OA2_MASK06 ((uint8_t)0x06U) +#define SMBUS_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + + +/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode + * @{ + */ +#define SMBUS_GENERALCALL_DISABLE (0x00000000U) +#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode + * @{ + */ +#define SMBUS_NOSTRETCH_DISABLE (0x00000000U) +#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode + * @{ + */ +#define SMBUS_PEC_DISABLE (0x00000000U) +#define SMBUS_PEC_ENABLE I2C_CR1_PECEN +/** + * @} + */ + +/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode + * @{ + */ +#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U) +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN +/** + * @} + */ + +/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition + * @{ + */ + +#define SMBUS_SOFTEND_MODE (0x00000000U) +#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD +#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND +#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE +/** + * @} + */ + +/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition + * @{ + */ + +#define SMBUS_NO_STARTSTOP (0x00000000U) +#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition + * @{ + */ + +/* List of XferOptions in usage of : + * 1- Restart condition when direction change + * 2- No Restart condition in other use cases + */ +#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE +#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) +#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) +#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) +#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) +/** + * @} + */ + +/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition + * @brief SMBUS Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define SMBUS_IT_ERRI I2C_CR1_ERRIE +#define SMBUS_IT_TCI I2C_CR1_TCIE +#define SMBUS_IT_STOPI I2C_CR1_STOPIE +#define SMBUS_IT_NACKI I2C_CR1_NACKIE +#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE +#define SMBUS_IT_RXI I2C_CR1_RXIE +#define SMBUS_IT_TXI I2C_CR1_TXIE +#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \ + SMBUS_IT_NACKI | SMBUS_IT_TXI) +#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \ + SMBUS_IT_RXI) +#define SMBUS_IT_ALERT (SMBUS_IT_ERRI) +#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI) +/** + * @} + */ + +/** @defgroup SMBUS_Flag_definition SMBUS Flag definition + * @brief Flag definition + * Elements values convention: 0xXXXXYYYY + * - XXXXXXXX : Flag mask + * @{ + */ + +#define SMBUS_FLAG_TXE I2C_ISR_TXE +#define SMBUS_FLAG_TXIS I2C_ISR_TXIS +#define SMBUS_FLAG_RXNE I2C_ISR_RXNE +#define SMBUS_FLAG_ADDR I2C_ISR_ADDR +#define SMBUS_FLAG_AF I2C_ISR_NACKF +#define SMBUS_FLAG_STOPF I2C_ISR_STOPF +#define SMBUS_FLAG_TC I2C_ISR_TC +#define SMBUS_FLAG_TCR I2C_ISR_TCR +#define SMBUS_FLAG_BERR I2C_ISR_BERR +#define SMBUS_FLAG_ARLO I2C_ISR_ARLO +#define SMBUS_FLAG_OVR I2C_ISR_OVR +#define SMBUS_FLAG_PECERR I2C_ISR_PECERR +#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define SMBUS_FLAG_ALERT I2C_ISR_ALERT +#define SMBUS_FLAG_BUSY I2C_ISR_BUSY +#define SMBUS_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros + * @{ + */ + +/** @brief Reset SMBUS handle state. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SMBUS interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SMBUS flag is set or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status + * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode) + * @arg @ref SMBUS_FLAG_TCR Transfer complete reload + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * @arg @ref SMBUS_FLAG_BUSY Bus busy + * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define SMBUS_FLAG_MASK (0x0001FFFFU) +#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \ + (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) + +/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == SMBUS_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Macro SMBUS Private Macros + * @{ + */ + +#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ + ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) + +#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_SMBUS_ADDRESSING_MODE(MODE) ((MODE) == SMBUS_ADDRESSINGMODE_7BIT) + +#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) + +#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \ + ((MASK) == SMBUS_OA2_MASK01) || \ + ((MASK) == SMBUS_OA2_MASK02) || \ + ((MASK) == SMBUS_OA2_MASK03) || \ + ((MASK) == SMBUS_OA2_MASK04) || \ + ((MASK) == SMBUS_OA2_MASK05) || \ + ((MASK) == SMBUS_OA2_MASK06) || \ + ((MASK) == SMBUS_OA2_MASK07)) + +#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ + ((CALL) == SMBUS_GENERALCALL_ENABLE)) + +#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ + ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) + +#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ + ((PEC) == SMBUS_PEC_ENABLE)) + +#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) + +#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \ + ((MODE) == SMBUS_AUTOEND_MODE) || \ + ((MODE) == SMBUS_SOFTEND_MODE) || \ + ((MODE) == SMBUS_SENDPEC_MODE) || \ + ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \ + SMBUS_RELOAD_MODE ))) + + +#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \ + ((REQUEST) == SMBUS_GENERATE_START_READ) || \ + ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \ + ((REQUEST) == SMBUS_NO_STARTSTOP)) + + +#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ + ((REQUEST) == SMBUS_FIRST_FRAME) || \ + ((REQUEST) == SMBUS_NEXT_FRAME) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) + +#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) + +#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \ + (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \ + I2C_CR1_PECEN))) +#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & \ + (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \ + (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U) +#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U) +#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE) +#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN) + +#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) +#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +/** + * @} + */ + +/* Include SMBUS HAL Extended module */ +#include "stm32c0xx_hal_smbus_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup Blocking_mode_Polling Blocking mode Polling + * @{ + */ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt + * @{ + */ +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); + +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus); +uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions are defined in stm32c0xx_hal_smbus.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_SMBUS_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus_ex.h new file mode 100644 index 0000000000..84e2e5ed7e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_smbus_ex.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smbus_ex.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SMBUS_EX_H +#define STM32C0xx_HAL_SMBUS_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUSEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants + * @{ + */ + +/** @defgroup SMBUSEx_FastModePlus SMBUS Extended Fast Mode Plus + * @{ + */ +#define SMBUS_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define SMBUS_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define SMBUS_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define SMBUS_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define SMBUS_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define SMBUS_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define SMBUS_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#else +#define SMBUS_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ +#define SMBUS_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#define SMBUS_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Macros SMBUS Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_SMBUSEx_EnableWakeUp(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUSEx_DisableWakeUp(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Constants SMBUS Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Macro SMBUS Extended Private Macros + * @{ + */ +#define IS_SMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA9)) == SMBUS_FASTMODEPLUS_PA9) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA10)) == SMBUS_FASTMODEPLUS_PA10) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6)) == SMBUS_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7)) == SMBUS_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB8)) == SMBUS_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB9)) == SMBUS_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C1)) == SMBUS_FASTMODEPLUS_I2C1)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Functions SMBUS Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32c0xx_hal_smbus_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_SMBUS_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi.h new file mode 100644 index 0000000000..6e362f10fd --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi.h @@ -0,0 +1,850 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SPI_H +#define STM32C0xx_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32c0xx_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, +pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, +uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, +uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, +uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_SPI_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi_ex.h new file mode 100644 index 0000000000..2d9e607941 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_spi_ex.h @@ -0,0 +1,72 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_SPI_EX_H +#define STM32C0xx_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_SPI_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim.h new file mode 100644 index 0000000000..26dc21eee3 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim.h @@ -0,0 +1,2415 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_TIM_H +#define STM32C0xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x10000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x20000000U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR1 0x00000014U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#if defined(USB_BASE) +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#endif /* USB_BASE */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#if defined(USB_BASE) +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#endif /* USB_BASE */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENALE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#if defined(USB_BASE) +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#else +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) +#endif /* USB_BASE */ + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#if defined(PWR_PVD_SUPPORT) +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#else +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) +#endif /* PWR_PVD_SUPPORT */ + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32c0xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_TIM_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim_ex.h new file mode 100644 index 0000000000..b667e679b3 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_tim_ex.h @@ -0,0 +1,373 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_TIM_EX_H +#define STM32C0xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined(TIM3) +#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */ +#endif /* TIM3 */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ + +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1_TI1 is connected to GPIO */ +#define TIM_TIM1_TI2_GPIO 0x00000000U /*!< TIM1_TI2 is connected to GPIO */ +#define TIM_TIM1_TI3_GPIO 0x00000000U /*!< TIM1_TI3 is connected to GPIO */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3_TI1 is connected to GPIO */ +#define TIM_TIM3_TI2_GPIO 0x00000000U /*!< TIM3_TI2 is connected to GPIO */ +#define TIM_TIM3_TI3_GPIO 0x00000000U /*!< TIM3_TI3 is connected to GPIO */ + +#define TIM_TIM14_TI1_GPIO 0x00000000U /*!< TIM14_TI1 is connected to GPIO */ +#define TIM_TIM14_TI1_RTC 0x00000001U /*!< TIM14_TI1 is connected to RTC clock */ +#define TIM_TIM14_TI1_HSE_32 0x00000002U /*!< TIM14_TI1 is connected to HSE div 32 */ +#define TIM_TIM14_TI1_MCO 0x00000003U /*!< TIM14_TI1 is connected to MCO */ +#define TIM_TIM14_TI1_MCO2 0x00000004U /*!< TIM14_TI1 is connected to MCO2 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16_TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI 0x00000001U /*!< TIM16_TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE 0x00000002U /*!< TIM16_TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /*!< TIM16_TI1 is connected to TRC wakeup interrupt */ +#define TIM_TIM16_TI1_MCO2 0x00000004U /*!< TIM16_TI1 is connected to MCO2 */ + +#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17_TI1 is connected to GPIO */ +#if defined(RCC_HSI48_SUPPORT) +#define TIM_TIM17_TI1_HSI48 0x00000001U /*!< TIM17_TI1 is connected to HSI48/256 */ +#endif /* RCC_HSI48_SUPPORT */ +#define TIM_TIM17_TI1_HSE_32 0x00000002U /*!< TIM17_TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO 0x00000003U /*!< TIM17_TI1 is connected to MCO */ +#define TIM_TIM17_TI1_MCO2 0x00000004U /*!< TIM17_TI1 is connected to MCO2 */ + +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32C0xx_HAL_TIM_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart.h new file mode 100644 index 0000000000..5371f36eef --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart.h @@ -0,0 +1,1693 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_UART_H +#define STM32C0xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * It is expected to admit following values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on C0 (i.e. 48 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 8000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32c0xx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_UART_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart_ex.h new file mode 100644 index 0000000000..e95299ef9c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_uart_ex.h @@ -0,0 +1,337 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_UART_EX_H +#define STM32C0xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSIKER: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_UART_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart.h new file mode 100644 index 0000000000..8b82dd63bf --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart.h @@ -0,0 +1,945 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_usart.h + * @author MCD Application Team + * @brief Header file of USART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_USART_H +#define STM32C0xx_HAL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + Baud Rate Register[15:4] = ((2 * fclk_pres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * fclk_pres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where fclk_pres is the USART input clock frequency (fclk) + divided by a prescaler. + @note Oversampling by 8 is systematically applied to + achieve high baud rates. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode. */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity. */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase. */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref USART_ClockPrescaler. */ +} USART_InitTypeDef; + +/** + * @brief HAL USART State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04U /*!< Error */ +} HAL_USART_StateTypeDef; + +/** + * @brief USART clock sources definitions + */ +typedef enum +{ + USART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + USART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + USART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + USART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + USART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} USART_ClockSourceTypeDef; + +/** + * @brief USART handle Structure definition + */ +typedef struct __USART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< USART communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< USART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< USART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ + + uint16_t Mask; /*!< USART Rx RDR register mask */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t SlaveMode; /*!< Enable/Disable UART SPI Slave Mode. This parameter can be a value + of @ref USARTEx_Slave_Mode */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value + of @ref USARTEx_FIFO_mode. */ + + void (*RxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_USART_StateTypeDef State; /*!< USART communication state */ + + __IO uint32_t ErrorCode; /*!< USART Error code */ + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */ + void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */ + void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */ + void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */ + void (* RxFifoFullCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */ + void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} USART_HandleTypeDef; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL USART Callback ID enumeration definition + */ +typedef enum +{ + HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */ + HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */ + HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */ + HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */ + HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */ + HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */ + HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */ + HAL_USART_RX_FIFO_FULL_CB_ID = 0x07U, /*!< USART Rx Fifo Full Callback ID */ + HAL_USART_TX_FIFO_EMPTY_CB_ID = 0x08U, /*!< USART Tx Fifo Empty Callback ID */ + + HAL_USART_MSPINIT_CB_ID = 0x09U, /*!< USART MspInit callback ID */ + HAL_USART_MSPDEINIT_CB_ID = 0x0AU /*!< USART MspDeInit callback ID */ + +} HAL_USART_CallbackIDTypeDef; + +/** + * @brief HAL USART Callback pointer definition + */ +typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */ + +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_Error_Definition USART Error Definition + * @{ + */ +#define HAL_USART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_USART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_USART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_USART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_USART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_USART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_USART_ERROR_UDR (0x00000020U) /*!< SPI slave underrun error */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define HAL_USART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +#define HAL_USART_ERROR_RTO (0x00000080U) /*!< Receiver Timeout error */ +/** + * @} + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< USART frame with 0.5 stop bit */ +#define USART_STOPBITS_1 0x00000000U /*!< USART frame with 1 stop bit */ +#define USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< USART frame with 1.5 stop bits */ +#define USART_STOPBITS_2 USART_CR2_STOP_1 /*!< USART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE 0x00000000U /*!< No parity */ +#define USART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define USART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define USART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLE 0x00000000U /*!< USART clock disable */ +#define USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< USART clock enable */ +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW 0x00000000U /*!< Driver enable signal is active high */ +#define USART_POLARITY_HIGH USART_CR2_CPOL /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE 0x00000000U /*!< USART frame phase on first clock transition */ +#define USART_PHASE_2EDGE USART_CR2_CPHA /*!< USART frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE 0x00000000U /*!< USART frame last data bit clock pulse not output to SCLK pin */ +#define USART_LASTBIT_ENABLE USART_CR2_LBCL /*!< USART frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_ClockPrescaler USART Clock Prescaler + * @{ + */ +#define USART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define USART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define USART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define USART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define USART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define USART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define USART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define USART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define USART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define USART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define USART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define USART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ + +/** + * @} + */ + +/** @defgroup USART_Request_Parameters USART Request Parameters + * @{ + */ +#define USART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define USART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define USART_FLAG_TXFT USART_ISR_TXFT /*!< USART TXFIFO threshold flag */ +#define USART_FLAG_RXFT USART_ISR_RXFT /*!< USART RXFIFO threshold flag */ +#define USART_FLAG_RXFF USART_ISR_RXFF /*!< USART RXFIFO Full flag */ +#define USART_FLAG_TXFE USART_ISR_TXFE /*!< USART TXFIFO Empty flag */ +#define USART_FLAG_REACK USART_ISR_REACK /*!< USART receive enable acknowledge flag */ +#define USART_FLAG_TEACK USART_ISR_TEACK /*!< USART transmit enable acknowledge flag */ +#define USART_FLAG_BUSY USART_ISR_BUSY /*!< USART busy flag */ +#define USART_FLAG_UDR USART_ISR_UDR /*!< SPI slave underrun error flag */ +#define USART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< USART transmit data register empty */ +#define USART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< USART TXFIFO not full */ +#define USART_FLAG_RTOF USART_ISR_RTOF /*!< USART receiver timeout flag */ +#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */ +#define USART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< USART read data register not empty */ +#define USART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< USART RXFIFO not empty */ +#define USART_FLAG_IDLE USART_ISR_IDLE /*!< USART idle flag */ +#define USART_FLAG_ORE USART_ISR_ORE /*!< USART overrun error */ +#define USART_FLAG_NE USART_ISR_NE /*!< USART noise error */ +#define USART_FLAG_FE USART_ISR_FE /*!< USART frame error */ +#define USART_FLAG_PE USART_ISR_PE /*!< USART parity error */ +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define USART_IT_PE 0x0028U /*!< USART parity error interruption */ +#define USART_IT_TXE 0x0727U /*!< USART transmit data register empty interruption */ +#define USART_IT_TXFNF 0x0727U /*!< USART TX FIFO not full interruption */ +#define USART_IT_TC 0x0626U /*!< USART transmission complete interruption */ +#define USART_IT_RXNE 0x0525U /*!< USART read data register not empty interruption */ +#define USART_IT_RXFNE 0x0525U /*!< USART RXFIFO not empty interruption */ +#define USART_IT_IDLE 0x0424U /*!< USART idle interruption */ +#define USART_IT_ERR 0x0060U /*!< USART error interruption */ +#define USART_IT_ORE 0x0300U /*!< USART overrun error interruption */ +#define USART_IT_NE 0x0200U /*!< USART noise error interruption */ +#define USART_IT_FE 0x0100U /*!< USART frame error interruption */ +#define USART_IT_RXFF 0x183FU /*!< USART RXFIFO full interruption */ +#define USART_IT_TXFE 0x173EU /*!< USART TXFIFO empty interruption */ +#define USART_IT_RXFT 0x1A7CU /*!< USART RXFIFO threshold reached interruption */ +#define USART_IT_TXFT 0x1B77U /*!< USART TXFIFO threshold reached interruption */ + +/** + * @} + */ + +/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags + * @{ + */ +#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define USART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define USART_CLEAR_UDRF USART_ICR_UDRCF /*!< SPI slave underrun error Clear Flag */ +#define USART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO Empty Clear Flag */ +#define USART_CLEAR_RTOF USART_ICR_RTOCF /*!< USART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup USART_Interruption_Mask USART Interruption Flags Mask + * @{ + */ +#define USART_IT_MASK 0x001FU /*!< USART interruptions flags mask */ +#define USART_CR_MASK 0x00E0U /*!< USART control register mask */ +#define USART_CR_POS 5U /*!< USART control register position */ +#define USART_ISR_MASK 0x1F00U /*!< USART ISR register mask */ +#define USART_ISR_POS 8U /*!< USART ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + +/** @brief Reset USART handle state. + * @param __HANDLE__ USART handle. + * @retval None + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_USART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** @brief Check whether the specified USART flag is set or not. + * @param __HANDLE__ specifies the USART Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref USART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref USART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref USART_FLAG_RXFF RXFIFO Full flag + * @arg @ref USART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref USART_FLAG_BUSY Busy flag + * @arg @ref USART_FLAG_UDR SPI slave underrun error flag + * @arg @ref USART_FLAG_TXE Transmit data register empty flag + * @arg @ref USART_FLAG_TXFNF TXFIFO not full flag + * @arg @ref USART_FLAG_TC Transmission Complete flag + * @arg @ref USART_FLAG_RXNE Receive data register not empty flag + * @arg @ref USART_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref USART_FLAG_RTOF Receiver Timeout flag + * @arg @ref USART_FLAG_IDLE Idle Line detection flag + * @arg @ref USART_FLAG_ORE OverRun Error flag + * @arg @ref USART_FLAG_NE Noise Error flag + * @arg @ref USART_FLAG_FE Framing Error flag + * @arg @ref USART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified USART pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref USART_CLEAR_UDRF SPI slave underrun error Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the USART PE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF) + +/** @brief Clear the USART FE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF) + +/** @brief Clear the USART NE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF) + +/** @brief Clear the USART ORE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF) + +/** @brief Clear the USART IDLE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF) + +/** @brief Clear the USART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_TXFECF(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_TXFECF) + +/** @brief Clear SPI slave underrun error flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_UDRFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_UDRF) + +/** @brief Enable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Disable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Check whether the specified USART interrupt has occurred or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>>\ + USART_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified USART interrupt source is enabled or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (0x01U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + USART_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific USART request flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __REQ__ specifies the request flag to set. + * This parameter can be one of the following values: + * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * + * @retval None + */ +#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup USART_Private_Macros USART Private Macros + * @{ + */ + +/** @brief Get USART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval USART clock division factor + */ +#define USART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ USART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval Division result + */ +#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__)\ + (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\ + + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Report the USART clock source. + * @param __HANDLE__ specifies the USART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval the USART clocking source, written in __CLOCKSOURCE__. + */ +#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSIKER: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) + +/** @brief Check USART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on C0 (i.e. 48 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) */ +#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 8000000U) + +/** + * @brief Ensure that USART frame number of stop bits is valid. + * @param __STOPBITS__ USART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \ + ((__STOPBITS__) == USART_STOPBITS_1) || \ + ((__STOPBITS__) == USART_STOPBITS_1_5) || \ + ((__STOPBITS__) == USART_STOPBITS_2)) + +/** + * @brief Ensure that USART frame parity is valid. + * @param __PARITY__ USART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \ + ((__PARITY__) == USART_PARITY_EVEN) || \ + ((__PARITY__) == USART_PARITY_ODD)) + +/** + * @brief Ensure that USART communication mode is valid. + * @param __MODE__ USART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that USART clock state is valid. + * @param __CLOCK__ USART clock state. + * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid) + */ +#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \ + ((__CLOCK__) == USART_CLOCK_ENABLE)) + +/** + * @brief Ensure that USART frame polarity is valid. + * @param __CPOL__ USART frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH)) + +/** + * @brief Ensure that USART frame phase is valid. + * @param __CPHA__ USART frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE)) + +/** + * @brief Ensure that USART frame last bit clock pulse setting is valid. + * @param __LASTBIT__ USART frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == USART_LASTBIT_ENABLE)) + +/** + * @brief Ensure that USART request parameter is valid. + * @param __PARAM__ USART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that USART Prescaler is valid. + * @param __CLOCKPRESCALER__ USART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_USART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include USART HAL Extended module */ +#include "stm32c0xx_hal_usart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart); + +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); +void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_USART_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart_ex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart_ex.h new file mode 100644 index 0000000000..6ef95c5ca6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_usart_ex.h @@ -0,0 +1,281 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_usart_ex.h + * @author MCD Application Team + * @brief Header file of USART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_USART_EX_H +#define STM32C0xx_HAL_USART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup USARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants + * @{ + */ + +/** @defgroup USARTEx_Word_Length USARTEx Word Length + * @{ + */ +#define USART_WORDLENGTH_7B (USART_CR1_M1) /*!< 7-bit long USART frame */ +#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */ +#define USART_WORDLENGTH_9B (USART_CR1_M0) /*!< 9-bit long USART frame */ +/** + * @} + */ + +/** @defgroup USARTEx_Slave_Select_management USARTEx Slave Select Management + * @{ + */ +#define USART_NSS_HARD 0x00000000U /*!< SPI slave selection depends on NSS input pin */ +#define USART_NSS_SOFT USART_CR2_DIS_NSS /*!< SPI slave is always selected and NSS input pin is ignored */ +/** + * @} + */ + + +/** @defgroup USARTEx_Slave_Mode USARTEx Synchronous Slave mode enable + * @brief USART SLAVE mode + * @{ + */ +#define USART_SLAVEMODE_DISABLE 0x00000000U /*!< USART SPI Slave Mode Enable */ +#define USART_SLAVEMODE_ENABLE USART_CR2_SLVEN /*!< USART SPI Slave Mode Disable */ +/** + * @} + */ + +/** @defgroup USARTEx_FIFO_mode USARTEx FIFO mode + * @brief USART FIFO mode + * @{ + */ +#define USART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define USART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup USARTEx_TXFIFO_threshold_level USARTEx TXFIFO threshold level + * @brief USART TXFIFO level + * @{ + */ +#define USART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define USART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup USARTEx_RXFIFO_threshold_level USARTEx RXFIFO threshold level + * @brief USART RXFIFO level + * @{ + */ +#define USART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define USART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Macros USARTEx Private Macros + * @{ + */ + +/** @brief Compute the USART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the USART Handle. + * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define USART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that USART frame length is valid. + * @param __LENGTH__ USART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \ + ((__LENGTH__) == USART_WORDLENGTH_8B) || \ + ((__LENGTH__) == USART_WORDLENGTH_9B)) + +/** + * @brief Ensure that USART Negative Slave Select (NSS) pin management is valid. + * @param __NSS__ USART Negative Slave Select pin management. + * @retval SET (__NSS__ is valid) or RESET (__NSS__ is invalid) + */ +#define IS_USART_NSS(__NSS__) (((__NSS__) == USART_NSS_HARD) || \ + ((__NSS__) == USART_NSS_SOFT)) + +/** + * @brief Ensure that USART Slave Mode is valid. + * @param __STATE__ USART Slave Mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_SLAVEMODE(__STATE__) (((__STATE__) == USART_SLAVEMODE_DISABLE ) || \ + ((__STATE__) == USART_SLAVEMODE_ENABLE)) + +/** + * @brief Ensure that USART FIFO mode is valid. + * @param __STATE__ USART FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_FIFO_MODE_STATE(__STATE__) (((__STATE__) == USART_FIFOMODE_DISABLE ) || \ + ((__STATE__) == USART_FIFOMODE_ENABLE)) + +/** + * @brief Ensure that USART TXFIFO threshold level is valid. + * @param __THRESHOLD__ USART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that USART RXFIFO threshold level is valid. + * @param __THRESHOLD__ USART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_8_8)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup USARTEx_Exported_Functions_Group1 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart); +void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USARTEx_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig); +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_USART_EX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_wwdg.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_wwdg.h new file mode 100644 index 0000000000..ed1296a3b2 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_wwdg.h @@ -0,0 +1,306 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_WWDG_H +#define STM32C0xx_HAL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal_def.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Types WWDG Exported Types + * @{ + */ + +/** + * @brief WWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG. + This parameter can be a value of @ref WWDG_Prescaler */ + + uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter. + This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. + This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ + + uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not. + This parameter can be a value of @ref WWDG_EWI_Mode */ + +} WWDG_InitTypeDef; + +/** + * @brief WWDG handle Structure definition + */ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +typedef struct __WWDG_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +{ + WWDG_TypeDef *Instance; /*!< Register base address */ + + WWDG_InitTypeDef Init; /*!< WWDG required parameters */ + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */ + + void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */ +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +} WWDG_HandleTypeDef; + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief HAL WWDG common Callback ID enumeration definition + */ +typedef enum +{ + HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */ + HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */ +} HAL_WWDG_CallbackIDTypeDef; + +/** + * @brief HAL WWDG Callback pointer definition + */ +typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */ + +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition + * @{ + */ +#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */ +/** + * @} + */ + +/** @defgroup WWDG_Flag_definition WWDG Flag definition + * @brief WWDG Flag definition + * @{ + */ +#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */ +/** + * @} + */ + +/** @defgroup WWDG_Prescaler WWDG Prescaler + * @{ + */ +#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define WWDG_PRESCALER_128 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode + * @{ + */ +#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */ +#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Private_Macros WWDG Private Macros + * @{ + */ +#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \ + ((__PRESCALER__) == WWDG_PRESCALER_2) || \ + ((__PRESCALER__) == WWDG_PRESCALER_4) || \ + ((__PRESCALER__) == WWDG_PRESCALER_8) || \ + ((__PRESCALER__) == WWDG_PRESCALER_16) || \ + ((__PRESCALER__) == WWDG_PRESCALER_32) || \ + ((__PRESCALER__) == WWDG_PRESCALER_64) || \ + ((__PRESCALER__) == WWDG_PRESCALER_128)) + +#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W)) + +#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T)) + +#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \ + ((__MODE__) == WWDG_EWI_DISABLE)) +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Macros WWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the WWDG peripheral. + * @param __HANDLE__ WWDG handle + * @retval None + */ +#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA) + +/** + * @brief Enable the WWDG early wakeup interrupt. + * @param __HANDLE__: WWDG handle + * @param __INTERRUPT__ specifies the interrupt to enable. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early wakeup interrupt + * @note Once enabled this interrupt cannot be disabled except by a system reset. + * @retval None + */ +#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__)) + +/** + * @brief Check whether the selected WWDG interrupt has occurred or not. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the it to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__)) + +/** @brief Clear the WWDG interrupt pending bits. + * bits to clear the selected interrupt pending bits. + * @param __HANDLE__ WWDG handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + */ +#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__)) + +/** + * @brief Check whether the specified WWDG flag is set or not. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval The new state of WWDG_FLAG (SET or RESET). + */ +#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the WWDG's pending flags. + * @param __HANDLE__ WWDG handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag + * @retval None + */ +#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** @brief Check whether the specified WWDG interrupt source is enabled or not. + * @param __HANDLE__ WWDG Handle. + * @param __INTERRUPT__ specifies the WWDG interrupt source to check. + * This parameter can be one of the following values: + * @arg WWDG_IT_EWI: Early Wakeup Interrupt + * @retval state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup WWDG_Exported_Functions + * @{ + */ + +/** @addtogroup WWDG_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup WWDG_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ******************************************************/ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg); +void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_WWDG_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_adc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_adc.h new file mode 100644 index 0000000000..a1d9717a27 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_adc.h @@ -0,0 +1,5165 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_adc.h + * @author MCD Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_ADC_H +#define STM32C0xx_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC group regular sequencer: */ +/* To select into literal LL_ADC_REG_RANK_x the relevant bits for: */ +/* - sequencer rank bits position into the selected register */ + +#define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) + +/* Definition of ADC group regular sequencer bits information to be inserted */ +/* into ADC group regular sequencer ranks literals definition. */ +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ1" position in register */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ2" position in register */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ3" position in register */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ4" position in register */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ5" position in register */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ6" position in register */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ7" position in register */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ8" position in register */ + + + +/* Internal mask for ADC group regular trigger: */ +/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */ +/* - regular trigger source */ +/* - regular trigger edge */ +#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR1_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */ + +/* Mask containing trigger source masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTSEL) << (4U * 0UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 1UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 2UL)) | \ + ((ADC_CFGR1_EXTSEL) << (4U * 3UL)) ) + +/* Mask containing trigger edge masks for each of possible */ +/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ +/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ +#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN) << (4U * 0UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2UL)) | \ + ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) ) + +/* Definition of ADC group regular trigger bits information. */ +#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */ +#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */ + + + +/* Internal mask for ADC channel: */ +/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */ +/* - channel identifier defined by number */ +/* - channel identifier defined by bitfield */ +/* - channel differentiation between external channels (connected to */ +/* GPIO pins) and internal channels (connected to internal paths) */ +#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWD1CH) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL) +#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Value equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */ +#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */ +#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | \ + ADC_CHANNEL_ID_INTERNAL_CH_MASK) +/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FUL) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ + +/* Channel differentiation between external and internal channels */ +#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ +#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH) + +/* Definition of channels ID number information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_NUMBER (0x00000000UL) +#define ADC_CHANNEL_1_NUMBER (ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_2_NUMBER (ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_3_NUMBER (ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_4_NUMBER (ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_5_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_6_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_7_NUMBER (ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_8_NUMBER (ADC_CFGR1_AWD1CH_3) +#define ADC_CHANNEL_9_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_10_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_11_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_12_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2) +#define ADC_CHANNEL_13_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_14_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) +#define ADC_CHANNEL_15_NUMBER (ADC_CFGR1_AWD1CH_3 | ADC_CFGR1_AWD1CH_2 | \ + ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_16_NUMBER (ADC_CFGR1_AWD1CH_4) +#define ADC_CHANNEL_17_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_18_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_1) + +#define ADC_CHANNEL_19_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_1 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_20_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_2 ) +#define ADC_CHANNEL_21_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_0) +#define ADC_CHANNEL_22_NUMBER (ADC_CFGR1_AWD1CH_4 | ADC_CFGR1_AWD1CH_2 | ADC_CFGR1_AWD1CH_1) + +/* Definition of channels ID bitfield information to be inserted into */ +/* channels literals definition. */ +#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0) +#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1) +#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2) +#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3) +#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4) +#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5) +#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6) +#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7) +#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8) +#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9) +#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10) +#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11) +#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12) +#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13) +#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14) +#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15) +#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16) +#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17) +#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18) +#define ADC_CHANNEL_19_BITFIELD (ADC_CHSELR_CHSEL19) +#define ADC_CHANNEL_20_BITFIELD (ADC_CHSELR_CHSEL20) +#define ADC_CHANNEL_21_BITFIELD (ADC_CHSELR_CHSEL21) +#define ADC_CHANNEL_22_BITFIELD (ADC_CHSELR_CHSEL22) + +/* Internal mask for ADC channel sampling time: */ +/* To select into literals LL_ADC_SAMPLINGTIME_x */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in register SMPR) */ +/* - ADC channels sampling time: setting channel wise, to map each channel */ +/* on one of the common sampling time available. */ +/* - ADC channels common sampling time: set a sampling time into one of the */ +/* common sampling time available. */ +#define ADC_SAMPLING_TIME_CH_MASK (ADC_CHANNEL_ID_BITFIELD_MASK << ADC_SMPR_SMPSEL0_BITOFFSET_POS) +#define ADC_SAMPLING_TIME_SMP_MASK (ADC_SMPR_SMP2 | ADC_SMPR_SMP1) +#define ADC_SAMPLING_TIME_SMP_SHIFT_MASK (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SMPR_SMP1_BITOFFSET_POS) + +/* Internal mask for ADC analog watchdog: */ +/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */ +/* (concatenation of multiple bits used in different analog watchdogs, */ +/* (feature of several watchdogs not available on all STM32 families)). */ +/* - analog watchdog 1: monitored channel defined by number, */ +/* selection of ADC group (ADC group regular). */ + +/* Internal register offset for ADC analog watchdog channel configuration */ +#define ADC_AWD_CR1_REGOFFSET (0x00000000UL) +#define ADC_AWD_CR2_REGOFFSET (0x00100000UL) +#define ADC_AWD_CR3_REGOFFSET (0x00200000UL) + +/* Register offset gap between AWD1 and AWD2-AWD3 configuration registers */ +/* (Set separately as ADC_AWD_CRX_REGOFFSET to spare 32 bits space */ +#define ADC_AWD_CR12_REGOFFSETGAP_MASK (ADC_AWD2CR_AWD2CH_0) +#define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) + +#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS (20UL) + +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) + +#define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET in ADC_AWD_CRX_REGOFFSET_MASK */ + +/* Internal register offset for ADC analog watchdog threshold configuration */ +#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET) +#define ADC_AWD_TR2_REGOFFSET (ADC_AWD_CR2_REGOFFSET) +#define ADC_AWD_TR3_REGOFFSET (ADC_AWD_CR3_REGOFFSET + (1UL << ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS)) +#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET | ADC_AWD_TR2_REGOFFSET | ADC_AWD_TR3_REGOFFSET) +#define ADC_AWD_TRX_REGOFFSET_POS (ADC_AWD_CRX_REGOFFSET_POS) /* Position of bits ADC_SQRx_REGOFFSET in ADC_AWD_TRX_REGOFFSET_MASK */ +#define ADC_AWD_TRX_BIT_HIGH_MASK (0x00010000UL) /* Selection of 1 bit to discriminate threshold high: mask of bit */ +#define ADC_AWD_TRX_BIT_HIGH_POS (16UL) /* Selection of 1 bit to discriminate threshold high: position of bit */ +#define ADC_AWD_TRX_BIT_HIGH_SHIFT4 (ADC_AWD_TRX_BIT_HIGH_POS - 4UL) /* Shift of bit ADC_AWD_TRX_BIT_HIGH to position to perform a shift of 4 ranks */ +#define ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS (20UL) + + + +/* ADC registers bits positions */ +#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR1_RES" position in register */ +#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */ +#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */ +#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */ +#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */ +#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */ +#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */ +#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */ +#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */ +#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */ +#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */ +#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */ +#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */ +#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */ +#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */ +#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */ +#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */ +#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */ +#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */ +#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */ +#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */ +#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */ +#define ADC_CHSELR_CHSEL19_BITOFFSET_POS (19UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL19" position in register */ +#define ADC_CHSELR_CHSEL20_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL20" position in register */ +#define ADC_CHSELR_CHSEL21_BITOFFSET_POS (21UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL21" position in register */ +#define ADC_CHSELR_CHSEL22_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL22" position in register */ +#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SMPR_SMP1" position in register */ +#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_SMPR_SMP2" position in register */ +#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */ + + +/* ADC registers bits groups */ +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */ + + +/* ADC internal channels related definitions */ +/* Internal voltage reference VrefInt */ +#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFF756AUL)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define VREFINT_CAL_VREF ( 3000UL) /* Analog voltage reference (Vref+) voltage with which VrefInt has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ +/* Temperature sensor */ +/* Note: On all devices of series STM32C0, calibration parameter TS_CAL2 is not available. + Therefore, macro "__LL_ADC_CALC_TEMPERATURE()" is not available, + macro "__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS()" must be used and parameter TS_CAL1 can improve accuracy: replace + datasheet parameter of temperature offset (macro argument __TEMPSENSOR_TYP_CALX_V__) by TEMPSENSOR_CAL1_ADDR + (with taking into account conversion from digital value resolution 12 bit, analog voltage reference ratio + between calibration and application environments) */ +#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFF7568UL)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32C0, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */ +#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */ +#define TEMPSENSOR_CAL_VREFANALOG ( 3000UL) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of ADC common parameters + * and multimode + * (all ADC instances belonging to the same ADC common instance). + * @note The setting of these parameters by function @ref LL_ADC_CommonInit() + * is conditioned to ADC instances state (all ADC instances + * sharing the same ADC common instance): + * All ADC instances sharing the same ADC common instance must be + * disabled. + */ +typedef struct +{ + uint32_t CommonClock; /*!< Set parameter common to several ADC: Clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_COMMON_CLOCK_SOURCE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetCommonClock(). */ + +} LL_ADC_CommonInitTypeDef; + +/** + * @brief Structure definition of some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t Clock; /*!< Set ADC instance clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE + @note On this STM32 series, this parameter has some clock ratio constraints: + ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle + (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle). + + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock(). + For more details, refer to description of this function. */ + + uint32_t Resolution; /*!< Set ADC resolution. + This parameter can be a value of @ref ADC_LL_EC_RESOLUTION + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */ + + uint32_t DataAlignment; /*!< Set ADC conversion data alignment. + This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */ + + uint32_t LowPowerMode; /*!< Set ADC low power mode. + This parameter can be a value of @ref ADC_LL_EC_LP_MODE + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerMode(). */ + +} LL_ADC_InitTypeDef; + +/** + * @brief Structure definition of some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_REG_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line). + This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE + @note On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge + (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value). + In case of need to modify trigger edge, use function @ref LL_ADC_REG_SetTriggerEdge(). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */ + + uint32_t SequencerLength; /*!< Set ADC group regular sequencer length. + @note This parameter has an effect only if group regular sequencer is set to mode "fully configurable". Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_SCAN_LENGTH + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerLength(). */ + + uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. + This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE + @note This parameter has an effect only if group regular sequencer is enabled + (depending on the sequencer mode: scan length of 2 ranks or more, or several ADC channels enabled in group regular sequencer. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable() ). + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */ + + uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically). + This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE + Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode. + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */ + + uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode. + This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */ + + uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun: + data preserved or overwritten. + This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR + + This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetOverrun(). */ + +} LL_ADC_REG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_LL_EC_FLAG ADC flags + * @brief Flags defines which can be used with LL_ADC_ReadReg function + * @{ + */ +#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#define LL_ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC flag ADC channel configuration ready */ +#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary conversion */ +#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence conversions */ +#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ +#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */ +#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ +#define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ +#define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#define LL_ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC flag end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable) + * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions + * @{ + */ +#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#define LL_ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC interruption channel configuration ready */ +#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion */ +#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence conversions */ +#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ +#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling phase */ +#define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ +#define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ +#define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +#define LL_ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC interruption ADC end of calibration */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose + * @{ + */ +/* List of ADC registers intended to be used (most commonly) with */ +/* DMA transfer. */ +/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */ +#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000UL) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source + * @{ + */ +#define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without prescaler */ +#define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 2. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 4. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV6 (ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 6. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV8 (ADC_CCR_PRESC_2 ) /*!< ADC asynchronous clock with prescaler division by 8. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV10 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 10. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV12 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 12. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV16 (ADC_CCR_PRESC_2 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 16. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV32 (ADC_CCR_PRESC_3) /*!< ADC asynchronous clock with prescaler division by 32. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV64 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 64. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV128 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1) /*!< ADC asynchronous clock with prescaler division by 128. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +#define LL_ADC_CLOCK_ASYNC_DIV256 (ADC_CCR_PRESC_3 | ADC_CCR_PRESC_1 | ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 256. ADC common clock asynchronous prescaler is applied to each ADC instance if the corresponding ADC instance clock is set to clock source asynchronous (refer to function @ref LL_ADC_SetClock() ). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_CLOCK_FREQ_MODE ADC common - Clock frequency mode + * @{ + */ +#define LL_ADC_CLOCK_FREQ_MODE_HIGH (0x00000000UL) /*!< ADC clock mode to high frequency. On STM32C0, ADC clock frequency above 3.5MHz. */ +#define LL_ADC_CLOCK_FREQ_MODE_LOW (ADC_CCR_LFMEN) /*!< ADC clock mode to low frequency. On STM32C0, ADC clock frequency below 3.5MHz. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels + * @{ + */ +/* Note: Other measurement paths to internal channels may be available */ +/* (connections to other peripherals). */ +/* If they are not listed below, they do not require any specific */ +/* path enable. In this case, Access to measurement path is done */ +/* only by selecting the corresponding ADC internal channel. */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ +#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ +#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel temperature sensor */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by 4 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CFGR2_CKMODE_1 | ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock not divided */ +#define LL_ADC_CLOCK_ASYNC (0x00000000UL) /*!< ADC asynchronous clock. Asynchronous clock prescaler can be configured using function @ref LL_ADC_SetCommonClock(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution + * @{ + */ +#define LL_ADC_RESOLUTION_12B (0x00000000UL) /*!< ADC resolution 12 bits */ +#define LL_ADC_RESOLUTION_10B ( ADC_CFGR1_RES_0) /*!< ADC resolution 10 bits */ +#define LL_ADC_RESOLUTION_8B (ADC_CFGR1_RES_1 ) /*!< ADC resolution 8 bits */ +#define LL_ADC_RESOLUTION_6B (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0) /*!< ADC resolution 6 bits */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment + * @{ + */ +#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR1_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode + * @{ + */ +#define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC automatically powers-off after a ADC conversion and automatically wakes up when a new ADC conversion is triggered (with startup time between trigger and start of sampling). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define LL_ADC_TRIGGER_FREQ_HIGH (0x00000000UL) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define LL_ADC_TRIGGER_FREQ_LOW (ADC_CFGR2_LFTRIG) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels + * @{ + */ +#define LL_ADC_SAMPLINGTIME_COMMON_1 (ADC_SMPR_SMP1_BITOFFSET_POS) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define LL_ADC_SAMPLINGTIME_COMMON_2 (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SAMPLING_TIME_CH_MASK) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number + * @{ + */ +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define LL_ADC_CHANNEL_19 (ADC_CHANNEL_19_NUMBER | ADC_CHANNEL_19_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN19 */ +#define LL_ADC_CHANNEL_20 (ADC_CHANNEL_20_NUMBER | ADC_CHANNEL_20_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN20 */ +#define LL_ADC_CHANNEL_21 (ADC_CHANNEL_21_NUMBER | ADC_CHANNEL_21_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN21 */ +#define LL_ADC_CHANNEL_22 (ADC_CHANNEL_22_NUMBER | ADC_CHANNEL_22_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN22 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_10 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_9 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ +#define LL_ADC_CHANNEL_VDDA (LL_ADC_CHANNEL_15 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VDDA. */ +#define LL_ADC_CHANNEL_VSSA (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VSSA. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source + * @{ + */ +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 ( ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 ( ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge + * @{ + */ +#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */ +#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR1_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */ +#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR1_EXTEN_1 | ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode + * @{ + */ +#define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions are performed in single mode: one conversion per trigger */ +#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR1_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data + * @{ + */ +#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000UL) /*!< ADC conversions are not transferred by DMA */ +#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */ +#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data + * @{ + */ +#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: data preserved */ +#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR1_OVRMOD) /*!< ADC group regular behavior in case of overrun: data overwritten */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_MODE ADC group regular - Sequencer configuration flexibility + * @{ + */ +#define LL_ADC_REG_SEQ_FIXED (0x00000000UL) /*!< Sequencer configured to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number. Refer to description of function @ref LL_ADC_REG_SetSequencerChannels(). */ +#define LL_ADC_REG_SEQ_CONFIGURABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer configured to fully configurable: sequencer length and each rank affectation to a channel are configurable. Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DISABLE (ADC_CHSELR_SQ2) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_CHSELR_SQ3) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_CHSELR_SQ4) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_CHSELR_SQ5) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_CHSELR_SQ6) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_CHSELR_SQ7) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_CHSELR_SQ8) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (0x00000000UL) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000UL) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction forward: from lowest channel number to highest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer). On some other STM32 families, this setting is not available and the default scan direction is forward. */ +#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< On this STM32 series, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction backward: from highest channel number to lowest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode + * @{ + */ +#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer discontinuous mode disable */ +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks + * @{ + */ +#define LL_ADC_REG_RANK_1 (ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 8 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time + * @{ + */ +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000UL) /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_3CYCLES_5 (ADC_SMPR_SMP1_0) /*!< Sampling time 3.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP1_1) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_19CYCLES_5 (ADC_SMPR_SMP1_2) /*!< Sampling time 19.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_39CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_0) /*!< Sampling time 39.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_79CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1) /*!< Sampling time 79.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_160CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number + * @{ + */ +#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ +#define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels + * @{ + */ +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK | ADC_CFGR1_AWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_19_REG ((LL_ADC_CHANNEL_19 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_20_REG ((LL_ADC_CHANNEL_20 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_21_REG ((LL_ADC_CHANNEL_21 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_22_REG ((LL_ADC_CHANNEL_22 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */ +#define LL_ADC_AWD_CH_VSSA_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VSSA : internal analog supply ground, converted by group regular only */ +#define LL_ADC_AWD_CH_VDDA_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VDDA : internal analog power supply, converted by group regular only */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds + * @{ + */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR1_HT1 ) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR1_HT1 | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope + * @{ + */ +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED ( ADC_CFGR2_OVSE) /*!< ADC oversampling on conversions of ADC group regular. Literal suffix "continued" is kept for compatibility with other STM32 devices featuring ADC group injected, in this case other oversampling scope parameters are available. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode + * @{ + */ +#define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TOVS) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_RATIO Oversampling - Ratio + * @{ + */ +#define LL_ADC_OVS_RATIO_2 (0x00000000UL) /*!< ADC oversampling ratio of 2 (2 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_4 ( ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 4 (4 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_8 ( ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 8 (8 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_16 ( ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 16 (16 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_32 (ADC_CFGR2_OVSR_2 ) /*!< ADC oversampling ratio of 32 (32 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_64 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 64 (64 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_128 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 ) /*!< ADC oversampling ratio of 128 (128 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +#define LL_ADC_OVS_RATIO_256 (ADC_CFGR2_OVSR_2 | ADC_CFGR2_OVSR_1 | ADC_CFGR2_OVSR_0) /*!< ADC oversampling ratio of 256 (256 ADC conversions are performed, sum of these conversions data is computed to result as the ADC oversampling conversion data (before potential shift) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_OVS_SHIFT Oversampling - Data shift + * @{ + */ +#define LL_ADC_OVS_SHIFT_NONE (0x00000000UL) /*!< ADC oversampling no shift (sum of the ADC conversions data is not divided to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_1 ( ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 1 (sum of the ADC conversions data is divided by 2 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_2 ( ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 2 (sum of the ADC conversions data is divided by 4 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_3 ( ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 3 (sum of the ADC conversions data is divided by 8 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_4 ( ADC_CFGR2_OVSS_2 ) /*!< ADC oversampling shift of 4 (sum of the ADC conversions data is divided by 16 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_5 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 5 (sum of the ADC conversions data is divided by 32 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_6 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 ) /*!< ADC oversampling shift of 6 (sum of the ADC conversions data is divided by 64 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_7 ( ADC_CFGR2_OVSS_2 | ADC_CFGR2_OVSS_1 | ADC_CFGR2_OVSS_0) /*!< ADC oversampling shift of 7 (sum of the ADC conversions data is divided by 128 to result as the ADC oversampling conversion data) */ +#define LL_ADC_OVS_SHIFT_RIGHT_8 (ADC_CFGR2_OVSS_3 ) /*!< ADC oversampling shift of 8 (sum of the ADC conversions data is divided by 256 to result as the ADC oversampling conversion data) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HELPER_MACRO Definitions of constants used by helper macro + * @{ + */ +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on calibration parameters. This value is coded on 16 bits (to fit on signed word or double word) and corresponds to an inconsistent temperature value. */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays + * @note Only ADC peripheral HW delays are defined in ADC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values. */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Indications for estimation of ADC timeout delays, for this */ +/* STM32 series: */ +/* - ADC calibration time: maximum delay is 82/fADC. */ +/* (refer to device datasheet, parameter "tCAL") */ +/* - ADC enable time: maximum delay is 1 conversion cycle. */ +/* (refer to device datasheet, parameter "tSTAB") */ +/* - ADC disable time: maximum delay should be a few ADC clock cycles */ +/* - ADC stop conversion time: maximum delay should be a few ADC clock */ +/* cycles */ +/* - ADC conversion time: duration depending on ADC clock and ADC */ +/* configuration. */ +/* (refer to device reference manual, section "Timing") */ + +/* Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tADCVREG_STUP"). */ +/* Unit: us */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */ + +/* Delay for internal voltage reference stabilization time. */ +/* Delay set to maximum value (refer to device datasheet, */ +/* parameter "tstart_vrefint"). */ +/* Unit: us */ +#define LL_ADC_DELAY_VREFINT_STAB_US ( 12UL) /*!< Delay for internal voltage reference stabilization time */ + +/* Delay for temperature sensor stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time (starting from temperature sensor enable, refer to @ref LL_ADC_SetCommonPathInternalCh()) */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization time (starting from ADC enable, refer to @ref LL_ADC_Enable()) */ + +/* Delay required between ADC end of calibration and ADC enable. */ +/* Note: On this STM32 series, a minimum number of ADC clock cycles */ +/* are required between ADC end of calibration and ADC enable. */ +/* Wait time can be computed in user application by waiting for the */ +/* equivalent number of CPU cycles, by taking into account */ +/* ratio of CPU clock versus ADC clock prescalers. */ +/* Unit: ADC clock cycles. */ +#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 2UL) /*!< Delay required between ADC end of calibration and ADC enable */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in ADC register + * @param __INSTANCE__ ADC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to get ADC channel number in decimal format + * from literals LL_ADC_CHANNEL_x. + * @note Example: + * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4) + * will return decimal number "4". + * @note The input can be a value from functions where a channel + * number is returned, either defined with number + * or with bitfield (only one bit must be set). + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Value between Min_Data=0 and Max_Data=18 + */ +#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) ? \ + ( \ + ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ + ) \ + : \ + ((((__CHANNEL__) & ADC_CHANNEL_0_BITFIELD) == ADC_CHANNEL_0_BITFIELD) ? (0UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_1_BITFIELD) == ADC_CHANNEL_1_BITFIELD) ? (1UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_2_BITFIELD) == ADC_CHANNEL_2_BITFIELD) ? (2UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_3_BITFIELD) == ADC_CHANNEL_3_BITFIELD) ? (3UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_4_BITFIELD) == ADC_CHANNEL_4_BITFIELD) ? (4UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_5_BITFIELD) == ADC_CHANNEL_5_BITFIELD) ? (5UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_6_BITFIELD) == ADC_CHANNEL_6_BITFIELD) ? (6UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_7_BITFIELD) == ADC_CHANNEL_7_BITFIELD) ? (7UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_8_BITFIELD) == ADC_CHANNEL_8_BITFIELD) ? (8UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_9_BITFIELD) == ADC_CHANNEL_9_BITFIELD) ? (9UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_10_BITFIELD) == ADC_CHANNEL_10_BITFIELD) ? (10UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_11_BITFIELD) == ADC_CHANNEL_11_BITFIELD) ? (11UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_12_BITFIELD) == ADC_CHANNEL_12_BITFIELD) ? (12UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_13_BITFIELD) == ADC_CHANNEL_13_BITFIELD) ? (13UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_14_BITFIELD) == ADC_CHANNEL_14_BITFIELD) ? (14UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_15_BITFIELD) == ADC_CHANNEL_15_BITFIELD) ? (15UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_16_BITFIELD) == ADC_CHANNEL_16_BITFIELD) ? (16UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_17_BITFIELD) == ADC_CHANNEL_17_BITFIELD) ? (17UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_18_BITFIELD) == ADC_CHANNEL_18_BITFIELD) ? (18UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_19_BITFIELD) == ADC_CHANNEL_19_BITFIELD) ? (19UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_20_BITFIELD) == ADC_CHANNEL_20_BITFIELD) ? (20UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_21_BITFIELD) == ADC_CHANNEL_21_BITFIELD) ? (21UL) : \ + ((((__CHANNEL__) & ADC_CHANNEL_22_BITFIELD) == ADC_CHANNEL_22_BITFIELD) ? (22UL) : \ + (0UL))))))))))))))))))))))))) + +/** + * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x + * from number in decimal format. + * @note Example: + * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4) + * will return a data equivalent to "LL_ADC_CHANNEL_4". + * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + */ +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__))) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @note The different literal definitions of ADC channels are: + * - ADC internal channel: + * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ... + * - ADC external channel (channel connected to a GPIO pin): + * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ... + * @note The channel parameter must be a value defined from literal + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...), + * must not be a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0UL) + +/** + * @brief Helper macro to convert a channel defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * to its equivalent parameter definition of a ADC external channel + * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...). + * @note The channel parameter can be, additionally to a value + * defined from parameter definition of a ADC internal channel + * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...), + * a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is returned + * from ADC registers. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 + * @arg @ref LL_ADC_CHANNEL_2 + * @arg @ref LL_ADC_CHANNEL_3 + * @arg @ref LL_ADC_CHANNEL_4 + * @arg @ref LL_ADC_CHANNEL_5 + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_19 + * @arg @ref LL_ADC_CHANNEL_20 + * @arg @ref LL_ADC_CHANNEL_21 + * @arg @ref LL_ADC_CHANNEL_22 + */ +#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ + ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK) + +/** + * @brief Helper macro to determine whether the internal channel + * selected is available on the ADC instance selected. + * @note The channel parameter must be a value defined from parameter + * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT, + * LL_ADC_CHANNEL_TEMPSENSOR, ...), + * must not be a value defined from parameter definition of + * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...) + * or a value from functions where a channel number is + * returned from ADC registers, + * because internal and external channels share the same channel + * number in ADC registers. The differentiation is made only with + * parameters definitions of driver. + * @param __ADC_INSTANCE__ ADC instance + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VREFINT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @arg @ref ADC_CHANNEL_VDDA + * @arg @ref ADC_CHANNEL_VSSA + * @retval Value "0" if the internal channel selected is not available on the ADC instance selected. + * Value "1" if the internal channel selected is available on the ADC instance selected. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ + (((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VDDA) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VSSA)) + +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VDDA_REG + * @arg @ref LL_ADC_AWD_CH_VSSA_REG + * (1) On STM32C0, parameter not available on all devices: only on STM32C031xx. + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + +/** + * @brief Helper macro to set the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds() + * or @ref LL_ADC_SetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to set the value of + * analog watchdog threshold high (on 8 bits): + * LL_ADC_SetAnalogWDThresholds + * (< ADCx param >, + * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, ) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \ + ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the value of ADC analog watchdog threshold high + * or low in function of ADC resolution, when ADC resolution is + * different of 12 bits. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, with a ADC resolution of 8 bits, to get the value of + * analog watchdog threshold high (on 8 bits): + * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION + * (LL_ADC_RESOLUTION_8B, + * LL_ADC_GetAnalogWDThresholds(, LL_ADC_AWD_THRESHOLD_HIGH) + * ); + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \ + ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U ))) + +/** + * @brief Helper macro to get the ADC analog watchdog threshold high + * or low from raw value containing both thresholds concatenated. + * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds(). + * Example, to get analog watchdog threshold high from the register raw value: + * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, ); + * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \ + (((__AWD_THRESHOLDS__) >> (((__AWD_THRESHOLD_TYPE__) & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)) & LL_ADC_AWD_THRESHOLD_LOW) + +/** + * @brief Helper macro to select the ADC common instance + * to which is belonging the selected ADC instance. + * @note ADC common register instance can be used for: + * - Set parameters common to several ADC instances + * - Multimode (for devices with several ADC instances) + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @param __ADCx__ ADC instance + * @retval ADC common register instance + */ +#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \ + (ADC1_COMMON) + +/** + * @brief Helper macro to check if all ADC instances sharing the same + * ADC common instance are disabled. + * @note This check is required by functions with setting conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * Refer to functions having argument "ADCxy_COMMON" as parameter. + * @note On devices with only 1 ADC common instance, parameter of this macro + * is useless and can be ignored (parameter kept for compatibility + * with devices featuring several ADC common instances). + * @param __ADCXY_COMMON__ ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Value "0" if all ADC instances sharing the same ADC common instance + * are disabled. + * Value "1" if at least one ADC instance sharing the same ADC common instance + * is enabled. + */ +#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ + LL_ADC_IsEnabled(ADC1) + +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ + (0xFFFUL >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_RESOLUTION_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_RESOLUTION_CURRENT__,\ + __ADC_RESOLUTION_TARGET__) \ +(((__DATA__) \ + << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL))) \ + >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1UL)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __ADC_DATA__ ADC conversion data (resolution 12 bits) + * (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ + __ADC_DATA__,\ + __ADC_RESOLUTION__) \ +((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ +) + +/** + * @brief Helper macro to calculate analog reference voltage (Vref+) + * (unit: mVolt) from ADC conversion data of internal voltage + * reference VrefInt. + * @note Computation is using VrefInt calibration value + * stored in system memory for each device during production. + * @note This voltage depends on user board environment: voltage level + * connected to pin Vref+. + * On devices with small package, the pin Vref+ is not present + * and internally bonded to pin Vdda. + * @note On this STM32 series, calibration data of internal voltage reference + * VrefInt corresponds to a resolution of 12 bits, + * this is the recommended ADC resolution to convert voltage of + * internal voltage reference VrefInt. + * Otherwise, this macro performs the processing to scale + * ADC conversion data to 12 bits. + * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits) + * of internal voltage reference VrefInt (unit: digital value). + * @param __ADC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Analog reference voltage (unit: mV) + */ +#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV) + * / Avg_Slope + CALx_TEMP + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * (unit: digital value) + * Avg_Slope = temperature sensor slope + * (unit: uV/Degree Celsius) + * TS_TYP_CALx_VOLT = temperature sensor digital value at + * temperature CALx_TEMP (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * @note: On this STM32 series, calibtation parameter TS_CAL1 can be used + * to improve calculation accuracy. + * Refer to @ref TEMPSENSOR_CAL1_ADDR. + * @note As calculation input, the analog reference voltage (Vref+) must be + * defined as it impacts the ADC LSB equivalent voltage. + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @note ADC measurement data must correspond to a resolution of 12 bits + * (full scale digital value 4095). If not the case, the data must be + * preliminarily rescaled to an equivalent resolution of 12 bits. + * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius). + * On STM32C0, refer to device datasheet parameter "Avg_Slope". + * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV). + * On STM32C0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1). + * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV) + * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV) + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured. + * This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\ + __TEMPSENSOR_TYP_CALX_V__,\ + __TEMPSENSOR_CALX_TEMP__,\ + __VREFANALOG_VOLTAGE__,\ + __TEMPSENSOR_ADC_DATA__,\ + __ADC_RESOLUTION__) \ +(((((int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \ + / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \ + * 1000UL) \ + - \ + (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \ + * 1000UL) \ + ) \ + ) / (int32_t)(__TEMPSENSOR_TYP_AVGSLOPE__) \ + ) + (int32_t)(__TEMPSENSOR_CALX_TEMP__) \ +) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management + * @{ + */ +/* Note: LL ADC functions to set DMA transfer are located into sections of */ +/* configuration of ADC instance, groups and multimode (if available): */ +/* @ref LL_ADC_REG_SetDMATransfer(), ... */ + +/** + * @brief Function to help to configure DMA transfer from ADC: retrieve the + * ADC register address from ADC instance and a list of ADC registers + * intended to be used (most commonly) with DMA transfer. + * @note These ADC registers are data registers: + * when ADC conversion data is available in ADC data registers, + * ADC generates a DMA transfer request. + * @note This macro is intended to be used with LL DMA driver, refer to + * function "LL_DMA_ConfigAddresses()". + * Example: + * LL_DMA_ConfigAddresses(DMA1, + * LL_DMA_CHANNEL_1, + * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA), + * (uint32_t)&< array or variable >, + * LL_DMA_DIRECTION_PERIPH_TO_MEMORY); + * @note For devices with several ADC: in multimode, some devices + * use a different data register outside of ADC instance scope + * (common data register). This macro manages this register difference, + * only ADC instance has to be set as parameter. + * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr + * @param ADCx ADC instance + * @param Register This parameter can be one of the following values: + * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA + * @retval ADC register address + */ +__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register) +{ + /* Prevent unused argument(s) compilation warning */ + (void)(Register); + + /* Retrieve address of register DR */ + return (uint32_t) &(ADCx->DR); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances + * @{ + */ + +/** + * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR PRESC LL_ADC_SetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param CommonClock This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_PRESC, CommonClock); +} + +/** + * @brief Get parameter common to several ADC: Clock source and prescaler. + * @rmtoll CCR PRESC LL_ADC_GetCommonClock + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV6 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV8 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV10 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV12 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV16 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV32 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 (1) + * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 (1) + * + * (1) ADC common clock asynchronous prescaler is applied to + * each ADC instance if the corresponding ADC instance clock + * is set to clock source asynchronous. + * (refer to function @ref LL_ADC_SetClock() ). + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_PRESC)); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n + * CCR TSEN LL_ADC_SetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_SetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literals @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US, + * @ref LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Get parameter common to several ADC: measurement path to internal + * channels (VrefInt, temperature sensor, ...). + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n + * CCR TSEN LL_ADC_GetCommonPathInternalCh\n + * CCR VBATEN LL_ADC_GetCommonPathInternalCh + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + */ +__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON) +{ + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Set ADC instance clock source and prescaler. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 CKMODE LL_ADC_SetClock + * @param ADCx ADC instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be configured using + * function @ref LL_ADC_SetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource); +} + +/** + * @brief Get ADC instance clock source and prescaler. + * @rmtoll CFGR2 CKMODE LL_ADC_GetClock + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be retrieved using + * function @ref LL_ADC_GetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + */ +__STATIC_INLINE uint32_t LL_ADC_GetClock(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE)); +} + +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + ADC_CALFACT_CALFACT, + CalibrationFactor); +} + +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @rmtoll CALFACT CALFACT LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT)); +} + +/** + * @brief Set ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 RES LL_ADC_SetResolution + * @param ADCx ADC instance + * @param Resolution This parameter can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution); +} + +/** + * @brief Get ADC resolution. + * Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 RES LL_ADC_GetResolution + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_RESOLUTION_12B + * @arg @ref LL_ADC_RESOLUTION_10B + * @arg @ref LL_ADC_RESOLUTION_8B + * @arg @ref LL_ADC_RESOLUTION_6B + */ +__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES)); +} + +/** + * @brief Set ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 ALIGN LL_ADC_SetDataAlignment + * @param ADCx ADC instance + * @param DataAlignment This parameter can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment); +} + +/** + * @brief Get ADC conversion data alignment. + * @note Refer to reference manual for alignments formats + * dependencies to ADC resolutions. + * @rmtoll CFGR1 ALIGN LL_ADC_GetDataAlignment + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DATA_ALIGN_RIGHT + * @arg @ref LL_ADC_DATA_ALIGN_LEFT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN)); +} + +/** + * @brief Set ADC low power mode. + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 WAIT LL_ADC_SetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_SetLowPowerMode + * @param ADCx ADC instance + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) +{ + MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode); +} + +/** + * @brief Get ADC low power mode: + * @note Description of ADC low power modes: + * - ADC low power mode "auto wait": Dynamic low power mode, + * ADC conversions occurrences are limited to the minimum necessary + * in order to reduce power consumption. + * New ADC conversion starts only when the previous + * unitary conversion data (for ADC group regular) + * has been retrieved by user software. + * In the meantime, ADC remains idle: does not performs any + * other conversion. + * This mode allows to automatically adapt the ADC conversions + * triggers to the speed of the software that reads the data. + * Moreover, this avoids risk of overrun for low frequency + * applications. + * How to use this low power mode: + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). + * - Do use with polling: 1. Start conversion, + * 2. Later on, when conversion data is needed: poll for end of + * conversion to ensure that conversion is completed and + * retrieve ADC conversion data. This will trig another + * ADC conversion start. + * - ADC low power mode "auto power-off" (feature available on + * this device if parameter LL_ADC_LP_AUTOPOWEROFF is available): + * the ADC automatically powers-off after a conversion and + * automatically wakes up when a new conversion is triggered + * (with startup time between trigger and start of sampling). + * This feature can be combined with low power mode "auto wait". + * @note With ADC low power mode "auto wait", the ADC conversion data read + * is corresponding to previous ADC conversion start, independently + * of delay during which ADC was idle. + * Therefore, the ADC conversion data may be outdated: does not + * correspond to the current voltage level on the selected + * ADC channel. + * @rmtoll CFGR1 WAIT LL_ADC_GetLowPowerMode\n + * CFGR1 AUTOFF LL_ADC_GetLowPowerMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_LP_MODE_NONE + * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF))); +} + +/** + * @brief Set ADC trigger frequency mode. + * @note ADC trigger frequency mode must be set to low frequency when + * a duration is exceeded before ADC conversion start trigger event + * (between ADC enable and ADC conversion start trigger event + * or between two ADC conversion start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + * @note When ADC trigger frequency mode is set to low frequency, + * some rearm cycles are inserted before performing ADC conversion + * start, inducing a delay of 2 ADC clock cycles. + * @note Usage of ADC trigger frequency mode with ADC low power mode: + * - Low power mode auto wait: Only the first ADC conversion + * start trigger inserts the rearm delay. + * - Low power mode auto power-off: ADC trigger frequency mode + * is discarded. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 LFTRIG LL_ADC_SetTriggerFrequencyMode + * @param ADCx ADC instance + * @param TriggerFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetTriggerFrequencyMode(ADC_TypeDef *ADCx, uint32_t TriggerFrequencyMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_LFTRIG, TriggerFrequencyMode); +} + +/** + * @brief Get ADC trigger frequency mode. + * @rmtoll CFGR2 LFTRIG LL_ADC_GetTriggerFrequencyMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetTriggerFrequencyMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_LFTRIG)); +} + +/** + * @brief Set sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 series, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMP1 LL_ADC_SetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_SetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY, + uint32_t SamplingTime) +{ + MODIFY_REG(ADCx->SMPR, + ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK), + SamplingTime << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @brief Get sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 series, sampling time scope is on ADC instance: + * Sampling time common to all channels. + * (on some other STM32 families, sampling time is channel wise) + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMP1 LL_ADC_GetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_GetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY) +{ + return (uint32_t)((READ_BIT(ADCx->SMPR, ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK))) + >> (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Set ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note On this STM32 series, setting trigger source to external trigger + * also set trigger polarity to rising edge + * (default setting for compatibility with some ADC on other + * STM32 families having this setting set by HW default value). + * In case of need to modify trigger edge, use + * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note On this STM32 series, ADC trigger frequency mode must be set + * in function of frequency of ADC group regular conversion trigger. + * Refer to description of function + * @ref LL_ADC_SetTriggerFrequencyMode(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_SetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_SetTriggerSource + * @param ADCx ADC instance + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource); +} + +/** + * @brief Get ADC group regular conversion trigger source: + * internal (SW start) or from external peripheral (timer event, + * external interrupt line). + * @note To determine whether group regular trigger source is + * internal (SW start) or external, without detail + * of which peripheral is selected as external trigger, + * (equivalent to + * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)") + * use function @ref LL_ADC_REG_IsTriggerSourceSWStart. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CFGR1 EXTSEL LL_ADC_REG_GetTriggerSource\n + * CFGR1 EXTEN LL_ADC_REG_GetTriggerSource + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_SOFTWARE + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) +{ + __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */ + uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN) + ); +} + +/** + * @brief Get ADC group regular conversion trigger source internal (SW start) + * or external. + * @note In case of group regular trigger source set to external trigger, + * to determine which peripheral is selected as external trigger, + * use function @ref LL_ADC_REG_GetTriggerSource(). + * @rmtoll CFGR1 EXTEN LL_ADC_REG_IsTriggerSourceSWStart + * @param ADCx ADC instance + * @retval Value "0" if trigger source external trigger + * Value "1" if trigger source SW start. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN)) ? 1UL : 0UL); +} + +/** + * @brief Set ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_SetTriggerEdge + * @param ADCx ADC instance + * @param ExternalTriggerEdge This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge); +} + +/** + * @brief Get ADC group regular conversion trigger polarity. + * @note Applicable only for trigger source set to external trigger. + * @rmtoll CFGR1 EXTEN LL_ADC_REG_GetTriggerEdge + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_TRIG_EXT_RISING + * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING + * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN)); +} + +/** + * @brief Set ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @param Configurability This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerConfigurable(ADC_TypeDef *ADCx, uint32_t Configurability) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD, Configurability); +} + +/** + * @brief Get ADC group regular sequencer configuration flexibility. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerConfigurable(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD)); +} + +/** + * @brief Set ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function performs configuration of: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerLength + * @param ADCx ADC instance + * @param SequencerNbRanks This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) +{ + SET_BIT(ADCx->CHSELR, SequencerNbRanks); +} + +/** + * @brief Get ADC group regular sequencer length and scan direction. + * @note Description of ADC group regular sequencer features: + * - For devices with sequencer fully configurable + * (function "LL_ADC_REG_SetSequencerRanks()" available): + * sequencer length and each rank affectation to a channel + * are configurable. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence. + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from rank 1 to rank n). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerRanks()". + * - For devices with sequencer not fully configurable + * (function "LL_ADC_REG_SetSequencerChannels()" available): + * sequencer length and each rank affectation to a channel + * are defined by channel number. + * This function retrieves: + * - Sequence length: Number of ranks in the scan sequence is + * defined by number of channels set in the sequence, + * rank of each channel is fixed by channel HW number. + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Sequence direction: Unless specified in parameters, sequencer + * scan direction is forward (from lowest channel number to + * highest channel number). + * Sequencer ranks are selected using + * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * @ref LL_ADC_REG_SetSequencerScanDirection(). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note Sequencer disabled is equivalent to sequencer of 1 rank: + * ADC conversion on only 1 channel. + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerLength + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) +{ + __IO uint32_t ChannelsRanks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL); + uint32_t SequencerLength = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS; + uint32_t RankIndex; + + /* Parse register for end of sequence identifier */ + for (RankIndex = 0UL; RankIndex < (32U - 4U); RankIndex += 4U) + { + if ((ChannelsRanks & (ADC_CHSELR_SQ2 << RankIndex)) == (ADC_CHSELR_SQ2 << RankIndex)) + { + SequencerLength = (ADC_CHSELR_SQ2 << RankIndex); + break; + } + } + + return SequencerLength; +} + +/** + * @brief Set ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 series, this setting is not available and + * the default scan direction is forward. + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection + * @param ADCx ADC instance + * @param ScanDirection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection); +} + +/** + * @brief Get ADC group regular sequencer scan direction. + * @note On this STM32 series, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 families, this setting is not available and + * the default scan direction is forward. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR)); +} + +/** + * @brief Set ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n + * @param ADCx ADC instance + * @param SeqDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont); +} + +/** + * @brief Get ADC group regular sequencer discontinuous mode: + * sequence subdivided and scan conversions interrupted every selected + * number of ranks. + * @rmtoll CFGR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE + * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN)); +} + +/** + * @brief Set ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @param Channel This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK_SEQ) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC group regular sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerRanks\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_RANK_1 + * @arg @ref LL_ADC_REG_RANK_2 + * @arg @ref LL_ADC_REG_RANK_3 + * @arg @ref LL_ADC_REG_RANK_4 + * @arg @ref LL_ADC_REG_RANK_5 + * @arg @ref LL_ADC_REG_RANK_6 + * @arg @ref LL_ADC_REG_RANK_7 + * @arg @ref LL_ADC_REG_RANK_8 + * @retval Returned value can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) +{ + return (uint32_t)((READ_BIT(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ) << (ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ); +} + +/** + * @brief Set ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by overwriting the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Add channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by adding them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by removing them to the current sequencer + * configuration. + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note On this STM32 series, after modifying sequencer (functions + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks(), ...) + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, some actions may be ignored. + * Refer to description of @ref LL_ADC_IsActiveFlag_CCRDY + * for more details. + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels order reading into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * @note On this STM32 series, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 series, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be retrieved. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx) +{ + uint32_t ChannelsBitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL); + + return ((((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL19) >> ADC_CHSELR_CHSEL19_BITOFFSET_POS) * LL_ADC_CHANNEL_19) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL20) >> ADC_CHSELR_CHSEL20_BITOFFSET_POS) * LL_ADC_CHANNEL_20) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL21) >> ADC_CHSELR_CHSEL21_BITOFFSET_POS) * LL_ADC_CHANNEL_21) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL22) >> ADC_CHSELR_CHSEL22_BITOFFSET_POS) * LL_ADC_CHANNEL_22) + ); +} + +/** + * @brief Set ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @note It is not possible to enable both ADC group regular + * continuous mode and sequencer discontinuous mode. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 CONT LL_ADC_REG_SetContinuousMode + * @param ADCx ADC instance + * @param Continuous This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous); +} + +/** + * @brief Get ADC continuous conversion mode on ADC group regular. + * @note Description of ADC continuous conversion mode: + * - single mode: one conversion per trigger + * - continuous mode: after the first trigger, following + * conversions launched successively automatically. + * @rmtoll CFGR1 CONT LL_ADC_REG_GetContinuousMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_CONV_SINGLE + * @arg @ref LL_ADC_REG_CONV_CONTINUOUS + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT)); +} + +/** + * @brief Set ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 DMAEN LL_ADC_REG_SetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_SetDMATransfer + * @param ADCx ADC instance + * @param DMATransfer This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer); +} + +/** + * @brief Get ADC group regular conversion data transfer: no transfer or + * transfer by DMA, and DMA requests mode. + * @note If transfer by DMA selected, specifies the DMA requests + * mode: + * - Limited mode (One shot mode): DMA transfer requests are stopped + * when number of DMA data transfers (number of + * ADC conversions) is reached. + * This ADC mode is intended to be used with DMA mode non-circular. + * - Unlimited mode: DMA transfer requests are unlimited, + * whatever number of DMA data transfers (number of + * ADC conversions). + * This ADC mode is intended to be used with DMA mode circular. + * @note If ADC DMA requests mode is set to unlimited and DMA is set to + * mode non-circular: + * when DMA transfers size will be reached, DMA will stop transfers of + * ADC conversions data ADC will raise an overrun error + * (overrun flag and interruption if enabled). + * @note To configure DMA source address (peripheral address), + * use function @ref LL_ADC_DMA_GetRegAddr(). + * @rmtoll CFGR1 DMAEN LL_ADC_REG_GetDMATransfer\n + * CFGR1 DMACFG LL_ADC_REG_GetDMATransfer + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE + * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED + * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG)); +} + +/** + * @brief Set ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @note Compatibility with devices without feature overrun: + * other devices without this feature have a behavior + * equivalent to data overwritten. + * The default setting of overrun is data preserved. + * Therefore, for compatibility with all devices, parameter + * overrun should be set to data overwritten. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_SetOverrun + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun); +} + +/** + * @brief Get ADC group regular behavior in case of overrun: + * data preserved or overwritten. + * @rmtoll CFGR1 OVRMOD LL_ADC_REG_GetOverrun + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED + * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels + * @{ + */ + +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll SMPR SMPSEL0 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_SetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTimeY) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +} + +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * Refer to reference manual for ADC processing time of + * this STM32 series. + * @rmtoll SMPR SMPSEL0 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL1 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL2 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL3 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL4 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL5 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL6 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL7 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL8 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL9 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL10 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL11 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL12 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL13 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL14 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL15 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL16 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL17 LL_ADC_GetChannelSamplingTime\n + * SMPR SMPSEL18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_0 + * @arg @ref ADC_CHANNEL_1 + * @arg @ref ADC_CHANNEL_2 + * @arg @ref ADC_CHANNEL_3 + * @arg @ref ADC_CHANNEL_4 + * @arg @ref ADC_CHANNEL_5 + * @arg @ref ADC_CHANNEL_6 + * @arg @ref ADC_CHANNEL_7 + * @arg @ref ADC_CHANNEL_8 (1) + * @arg @ref ADC_CHANNEL_9 (1) + * @arg @ref ADC_CHANNEL_10 + * @arg @ref ADC_CHANNEL_11 + * @arg @ref ADC_CHANNEL_12 + * @arg @ref ADC_CHANNEL_13 + * @arg @ref ADC_CHANNEL_14 + * @arg @ref ADC_CHANNEL_15 (1) + * @arg @ref ADC_CHANNEL_16 (1) + * @arg @ref ADC_CHANNEL_17 (3) + * @arg @ref ADC_CHANNEL_18 (3) + * @arg @ref ADC_CHANNEL_19 (3) + * @arg @ref ADC_CHANNEL_20 (3) + * @arg @ref ADC_CHANNEL_21 (3) + * @arg @ref ADC_CHANNEL_22 (3) + * @arg @ref ADC_CHANNEL_VREFINT (2) + * @arg @ref ADC_CHANNEL_TEMPSENSOR (2) + * @arg @ref ADC_CHANNEL_VDDA (2) + * @arg @ref ADC_CHANNEL_VSSA (2) + * + * (1) On STM32C0, parameter can be set in ADC group sequencer + * only if sequencer is set in mode "not fully configurable", + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable().\n + * (2) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * (3) ADC channels available on STM32C031xx device only. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) +{ + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ADC_SMPR_SMPSEL0_BITOFFSET_POS) & + 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return ((~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog + * @{ + */ + +/** + * @brief Set ADC analog watchdog monitored channels: + * a single channel or all channels, + * on ADC group regular. + * @note Once monitored channels are selected, analog watchdog + * is enabled. + * @note In case of need to define a single channel to monitor + * with analog watchdog from sequencer channel definition, + * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP(). + * @note On this STM32 series, there is only 1 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR1 AWD1CH LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_SetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_SetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_SetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_SetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDChannelGroup This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VDDA_REG + * @arg @ref LL_ADC_AWD_CH_VSSA_REG + * (1) On STM32C0, parameter not available on all devices: only on STM32C031xx. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) +{ + /* Set bits with content of parameter "AWDChannelGroup" with bits position */ + /* in register and register position depending on parameter "AWDy". */ + /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ + /* containing other bits reserved for other purpose. */ + register __IO uint32_t *preg; + + if (AWDy == LL_ADC_AWD1) + { + preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, 0UL); + } + else + { + preg = __ADC_PTR_REG_OFFSET(ADCx->AWD2CR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK)) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL)); + } + + MODIFY_REG(*preg, + (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & AWDy); +} + +/** + * @brief Get ADC analog watchdog monitored channel. + * @note Usage of the returned channel number: + * - To reinject this channel into another function LL_ADC_xxx: + * the returned channel number is only partly formatted on definition + * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared + * with parts of literals LL_ADC_CHANNEL_x or using + * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Then the selected literal LL_ADC_CHANNEL_x can be used + * as parameter for another function. + * - To get the channel number in decimal format: + * process the returned value with the helper macro + * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). + * Applicable only when the analog watchdog is set to monitor + * one channel. + * @note On this STM32 series, there is only 1 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 AWD1CH LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1SGL LL_ADC_GetAnalogWDMonitChannels\n + * CFGR1 AWD1EN LL_ADC_GetAnalogWDMonitChannels\n + * AWD2CR AWD2CH LL_ADC_GetAnalogWDMonitChannels\n + * AWD3CR AWD3CH LL_ADC_GetAnalogWDMonitChannels + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On this AWD number, monitored channel can be retrieved + * if only 1 channel is programmed (or none or all channels). + * This function cannot retrieve monitored channel if + * multiple channels are programmed simultaneously + * by bitfield. + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_19_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_20_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_21_REG (1) + * @arg @ref LL_ADC_AWD_CHANNEL_22_REG (1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG + * @arg @ref LL_ADC_AWD_CH_VDDA_REG + * @arg @ref LL_ADC_AWD_CH_VSSA_REG + * (1) On STM32C0, parameter not available on all devices: only on STM32C031xx. + */__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy) +{ + register __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + register uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if (AnalogWDMonitChannels != 0UL) + { + if (AWDy == LL_ADC_AWD1) + { + if ((AnalogWDMonitChannels & ADC_CFGR1_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = ((AnalogWDMonitChannels + | (ADC_AWD_CR23_CHANNEL_MASK) + ) + & (~(ADC_CFGR1_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_AWD2CR_AWD2CH_0 << (AnalogWDMonitChannels >> ADC_CFGR1_AWD1CH_Pos)) + ); + } + } + else + { + if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK + | (ADC_CFGR1_AWD1EN) + ); + } + else + { + /* AWD monitoring a single channel */ + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) + | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR1_AWD1CH_Pos) + ); + } + } + } + + return AnalogWDMonitChannels; +} +/** + * @brief Set ADC analog watchdog thresholds value of both thresholds + * high and low. + * @note If value of only one threshold high or low must be set, + * use function @ref LL_ADC_SetAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there is only 2 kind of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll TR1 HT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 HT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 HT3 LL_ADC_ConfigAnalogWDThresholds\n + * TR1 LT1 LL_ADC_ConfigAnalogWDThresholds\n + * TR2 LT2 LL_ADC_ConfigAnalogWDThresholds\n + * TR3 LT3 LL_ADC_ConfigAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) +{ + /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ + /* position in register and register position depending on parameter */ + /* "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + register __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + ADC_TR1_HT1 | ADC_TR1_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +} +/** + * @brief Set ADC analog watchdog threshold value of threshold + * high or low. + * @note If values of both thresholds high or low must be set, + * use function @ref LL_ADC_ConfigAnalogWDThresholds(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(). + * @note On this STM32 series, there is only 2 kinds of analog watchdog + * instance: + * - AWD standard (instance AWD1): + * - channels monitored: can monitor 1 channel or all channels. + * - groups monitored: ADC group regular. + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * - AWD flexible (instances AWD2, AWD3): + * - channels monitored: flexible on channels monitored, selection is + * channel wise, from from 1 to all channels. + * Specificity of this analog watchdog: Multiple channels can + * be selected. For example: + * (LL_ADC_AWD_CHANNEL4_REG_INJ | LL_ADC_AWD_CHANNEL5_REG_INJ | ...) + * - groups monitored: not selection possible (monitoring on both + * groups regular and injected). + * Channels selected are monitored on groups regular and injected: + * LL_ADC_AWD_CHANNELxx_REG_INJ (do not use parameters + * LL_ADC_AWD_CHANNELxx_REG and LL_ADC_AWD_CHANNELxx_INJ) + * - resolution: resolution is not limited (corresponds to + * ADC resolution configured). + * @note If ADC oversampling is enabled, ADC analog watchdog thresholds are + * impacted: the comparison of analog watchdog thresholds is done on + * oversampling final computation (after ratio and shift application): + * ADC data register bitfield [15:4] (12 most significant bits). + * Examples: + * - Oversampling ratio and shift selected to have ADC conversion data + * on 12 bits (ratio 16 and shift 4, or ratio 32 and shift 5, ...): + * ADC analog watchdog thresholds must be divided by 16. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 14 bits (ratio 16 and shift 2, or ratio 32 and shift 3, ...): + * ADC analog watchdog thresholds must be divided by 4. + * - Oversampling ratio and shift selected to have ADC conversion data + * on 16 bits (ratio 16 and shift none, or ratio 32 and shift 1, ...): + * ADC analog watchdog thresholds match directly to ADC data register. + * @note On this STM32 series, setting of this feature is not conditioned to + * ADC state: + * ADC can be disabled, enabled with or without conversion on going + * on ADC group regular. + * @rmtoll TR1 HT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_SetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_SetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_SetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_SetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + register __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + MODIFY_REG(*preg, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +} + +/** + * @brief Get ADC analog watchdog threshold value of threshold high, + * threshold low or raw data with ADC thresholds high and low + * concatenated. + * @note If raw data with ADC thresholds high and low is retrieved, + * the data of each threshold high or low can be isolated + * using helper macro: + * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(). + * @note In case of ADC resolution different of 12 bits, + * analog watchdog thresholds data require a specific shift. + * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). + * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n + * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n + * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n + * TR3 LT3 LL_ADC_GetAnalogWDThresholds + * @param ADCx ADC instance + * @param AWDy This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD1 + * @arg @ref LL_ADC_AWD2 + * @arg @ref LL_ADC_AWD3 + * @param AWDThresholdsHighLow This parameter can be one of the following values: + * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH + * @arg @ref LL_ADC_AWD_THRESHOLD_LOW + * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow) +{ + /* Set bits with content of parameter "AWDThresholdValue" with bits */ + /* position in register and register position depending on parameters */ + /* "AWDThresholdsHighLow" and "AWDy". */ + /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ + /* containing other bits reserved for other purpose. */ + register const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + + return (uint32_t)(READ_BIT(*preg, + (AWDThresholdsHighLow | ADC_TR1_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) & ~ + (AWDThresholdsHighLow & ADC_TR1_LT1)) + ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling + * @{ + */ + +/** + * @brief Set ADC oversampling scope. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSE LL_ADC_SetOverSamplingScope + * @param ADCx ADC instance + * @param OvsScope This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_OVSE, OvsScope); +} + +/** + * @brief Get ADC oversampling scope. + * @rmtoll CFGR2 OVSE LL_ADC_GetOverSamplingScope + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_DISABLE + * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSE)); +} + +/** + * @brief Set ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 TOVS LL_ADC_SetOverSamplingDiscont + * @param ADCx ADC instance + * @param OverSamplingDiscont This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TOVS, OverSamplingDiscont); +} + +/** + * @brief Get ADC oversampling discontinuous mode (triggered mode) + * on the selected ADC group. + * @note Number of oversampled conversions are done either in: + * - continuous mode (all conversions of oversampling ratio + * are done from 1 trigger) + * - discontinuous mode (each conversion of oversampling ratio + * needs a trigger) + * @rmtoll CFGR2 TOVS LL_ADC_GetOverSamplingDiscont + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_OVS_REG_CONT + * @arg @ref LL_ADC_OVS_REG_DISCONT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TOVS)); +} + +/** + * @brief Set ADC oversampling + * @note This function set the 2 items of oversampling configuration: + * - ratio + * - shift + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 OVSS LL_ADC_ConfigOverSamplingRatioShift\n + * CFGR2 OVSR LL_ADC_ConfigOverSamplingRatioShift + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + * @param Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint32_t Ratio, uint32_t Shift) +{ + MODIFY_REG(ADCx->CFGR2, (ADC_CFGR2_OVSS | ADC_CFGR2_OVSR), (Shift | Ratio)); +} + +/** + * @brief Get ADC oversampling ratio + * @rmtoll CFGR2 OVSR LL_ADC_GetOverSamplingRatio + * @param ADCx ADC instance + * @retval Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_RATIO_2 + * @arg @ref LL_ADC_OVS_RATIO_4 + * @arg @ref LL_ADC_OVS_RATIO_8 + * @arg @ref LL_ADC_OVS_RATIO_16 + * @arg @ref LL_ADC_OVS_RATIO_32 + * @arg @ref LL_ADC_OVS_RATIO_64 + * @arg @ref LL_ADC_OVS_RATIO_128 + * @arg @ref LL_ADC_OVS_RATIO_256 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); +} + +/** + * @brief Get ADC oversampling shift + * @rmtoll CFGR2 OVSS LL_ADC_GetOverSamplingShift + * @param ADCx ADC instance + * @retval Shift This parameter can be one of the following values: + * @arg @ref LL_ADC_OVS_SHIFT_NONE + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_1 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_2 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_3 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_4 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_5 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 + * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance + * @{ + */ + +/** + * @brief Enable ADC instance internal voltage regulator. + * @note On this STM32 series, there are three possibilities to enable + * the voltage regulator: + * - by enabling it manually + * using function @ref LL_ADC_EnableInternalRegulator(). + * - by launching a calibration + * using function @ref LL_ADC_StartCalibration(). + * - by enabling the ADC + * using function @ref LL_ADC_Enable(). + * @note On this STM32 series, after ADC internal voltage regulator enable, + * a delay for ADC internal voltage regulator stabilization + * is required before performing a ADC calibration or ADC enable. + * Refer to device datasheet, parameter "tADCVREG_STUP". + * Refer to literal @ref LL_ADC_DELAY_INTERNAL_REGUL_STAB_US. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_EnableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableInternalRegulator(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADVREGEN); +} + +/** + * @brief Disable ADC internal voltage regulator. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADVREGEN LL_ADC_DisableInternalRegulator + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableInternalRegulator(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CR, (ADC_CR_ADVREGEN | ADC_CR_BITS_PROPERTY_RS)); +} + +/** + * @brief Get the selected ADC instance internal voltage regulator state. + * @rmtoll CR ADVREGEN LL_ADC_IsInternalRegulatorEnabled + * @param ADCx ADC instance + * @retval 0: internal regulator is disabled, 1: internal regulator is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInternalRegulatorEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADVREGEN) == (ADC_CR_ADVREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the selected ADC instance. + * @note On this STM32 series, after ADC enable, a delay for + * ADC internal analog stabilization is required before performing a + * ADC conversion start. + * Refer to device datasheet, parameter tSTAB. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled and ADC internal voltage regulator enabled. + * @rmtoll CR ADEN LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADEN); +} + +/** + * @brief Disable the selected ADC instance. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be not disabled. Must be enabled without conversion on going + * on group regular. + * @rmtoll CR ADDIS LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADDIS); +} + +/** + * @brief Get the selected ADC instance enable state. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll CR ADEN LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is disabled, 1: ADC is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the selected ADC instance disable state. + * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing + * @param ADCx ADC instance + * @retval 0: no ADC disable command on going. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); +} + +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 series, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note In case of usage of ADC with DMA transfer: + * On this STM32 series, ADC DMA transfer request should be disabled + * during calibration: + * Calibration factor is available in data register + * and also transferred by DMA. + * To not insert ADC calibration factor among ADC conversion data + * in array variable, DMA transfer must be disabled during + * calibration. + * (DMA transfer setting backup and disable before calibration, + * DMA transfer setting restore after calibration. + * Refer to functions @ref LL_ADC_REG_GetDMATransfer(), + * @ref LL_ADC_REG_SetDMATransfer() ). + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL); +} + +/** + * @brief Get ADC calibration state. + * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing + * @param ADCx ADC instance + * @retval 0: calibration complete, 1: calibration in progress. + */ +__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular + * @{ + */ + +/** + * @brief Start ADC group regular conversion. + * @note On this STM32 series, this function is relevant for both + * internal trigger (SW start) and external trigger: + * - If ADC trigger has been set to software start, ADC conversion + * starts immediately. + * - If ADC trigger has been set to external trigger, ADC conversion + * will start at next trigger event (on the selected trigger edge) + * following the ADC start conversion command. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled without conversion on going on group regular, + * without conversion stop command on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTART LL_ADC_REG_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTART); +} + +/** + * @brief Stop ADC group regular conversion. + * @note On this STM32 series, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled with conversion on going on group regular, + * without ADC disable command on going. + * @rmtoll CR ADSTP LL_ADC_REG_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADSTP); +} + +/** + * @brief Get ADC group regular conversion state. + * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: no conversion is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular command of conversion stop state + * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: no command of conversion stop is on going on ADC group regular. + */ +__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP)) ? 1UL : 0UL); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * all ADC configurations: all ADC resolutions and + * all oversampling increased data width (for devices + * with feature oversampling). + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData32 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 12 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData12 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 10 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData10 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x000 and Max_Data=0x3FF + */ +__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx) +{ + return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 8 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData8 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @brief Get ADC group regular conversion data, range fit for + * ADC resolution 6 bits. + * @note For devices with feature oversampling: Oversampling + * can increase data width, function for extended range + * may be needed: @ref LL_ADC_REG_ReadConversionData32. + * @rmtoll DR DATA LL_ADC_REG_ReadConversionData6 + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) +{ + return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA)); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC channel configuration ready. + * @note On this STM32 series, after modifying sequencer + * it is mandatory to wait for the assertion of CCRDY flag + * using @ref LL_ADC_IsActiveFlag_CCRDY(). + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Functions requiring wait for CCRDY flag are: + * @ref LL_ADC_REG_SetSequencerLength() + * @ref LL_ADC_REG_SetSequencerRanks() + * @ref LL_ADC_REG_SetSequencerChannels() + * @ref LL_ADC_REG_SetSequencerChAdd() + * @ref LL_ADC_REG_SetSequencerChRem() + * @ref LL_ADC_REG_SetSequencerScanDirection() + * @ref LL_ADC_REG_SetSequencerConfigurable() + * @note Duration of ADC channel configuration ready: CCRDY handshake + * requires 1APB + 2 ADC + 3 APB cycles after the channel configuration + * has been changed. + * @rmtoll ISR CCRDY LL_ADC_IsActiveFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 1 flag + * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_IsActiveFlag_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD2) == (LL_ADC_FLAG_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_IsActiveFlag_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_IsActiveFlag_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOCAL) == (LL_ADC_FLAG_EOCAL)) ? 1UL : 0UL); +} + +/** + * @brief Clear flag ADC ready. + * @note On this STM32 series, flag LL_ADC_FLAG_ADRDY is raised when the ADC + * is enabled and when conversion clock is active. + * (not only core clock: this ADC has a dual clock domain) + * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); +} + +/** + * @brief Clear flag ADC channel configuration ready. + * @rmtoll ISR CCRDY LL_ADC_ClearFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_ClearFlag_CCRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Clear flag ADC group regular end of unitary conversion. + * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC); +} + +/** + * @brief Clear flag ADC group regular end of sequence conversions. + * @rmtoll ISR EOS LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS); +} + +/** + * @brief Clear flag ADC group regular overrun. + * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR); +} + +/** + * @brief Clear flag ADC group regular end of sampling phase. + * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); +} + +/** + * @brief Clear flag ADC analog watchdog 1. + * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1); +} + +/** + + * @brief Clear flag ADC analog watchdog 2. + * @rmtoll ISR AWD2 LL_ADC_ClearFlag_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD2(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD2); +} + +/** + * @brief Clear flag ADC analog watchdog 3. + * @rmtoll ISR AWD3 LL_ADC_ClearFlag_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); +} + +/** + * @brief Clear flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_ClearFlag_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCAL(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOCAL); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Enable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_EnableIT_CCRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Enable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Enable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Enable ADC group regular interruption overrun. + * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Enable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Enable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Enable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_EnableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD2(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Enable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_EnableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} +/** + * @brief Enable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_EnableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCAL(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Disable interruption ADC ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); +} + +/** + * @brief Disable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_DisableIT_CCRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +/** + * @brief Disable interruption ADC group regular end of unitary conversion. + * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC); +} + +/** + * @brief Disable interruption ADC group regular end of sequence conversions. + * @rmtoll IER EOSIE LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS); +} + +/** + * @brief Disable interruption ADC group regular overrun. + * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR); +} + +/** + * @brief Disable interruption ADC group regular end of sampling. + * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); +} + +/** + * @brief Disable interruption ADC analog watchdog 1. + * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1); +} + +/** + * @brief Disable interruption ADC analog watchdog 2. + * @rmtoll IER AWD2IE LL_ADC_DisableIT_AWD2 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD2(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD2); +} + +/** + * @brief Disable interruption ADC analog watchdog 3. + * @rmtoll IER AWD3IE LL_ADC_DisableIT_AWD3 + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); +} + +/** + * @brief Disable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_DisableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCAL(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +/** + * @brief Get state of interruption ADC ready + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of unitary conversion + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sequence conversions + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSIE LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular overrun + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC group regular end of sampling + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC analog watchdog 1 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD1IE LL_ADC_IsEnabledIT_AWD1 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 2 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD2IE LL_ADC_IsEnabledIT_AWD2 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD2(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD2) == (LL_ADC_IT_AWD2)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption Get ADC analog watchdog 3 + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER AWD3IE LL_ADC_IsEnabledIT_AWD3 + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); +} + +/** + * @brief Get state of interruption ADC end of calibration + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCALIE LL_ADC_IsEnabledIT_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOCAL) == (LL_ADC_IT_EOCAL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* Initialization of some features of ADC common parameters and multimode */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON); +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct); + +/* De-initialization of ADC instance */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct); +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct); + +/* Initialization of some features of ADC instance and ADC group regular */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_ADC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_bus.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_bus.h new file mode 100644 index 0000000000..10add40f1a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_bus.h @@ -0,0 +1,830 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_BUS_H +#define STM32C0xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLASHEN +#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBSMENR_SRAMSMEN +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APBENR1_TIM3EN +#define LL_APB1_GRP1_PERIPH_RTC RCC_APBENR1_RTCAPBEN +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APBENR1_WWDGEN +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APBENR1_USART2EN +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APBENR1_I2C1EN +#define LL_APB1_GRP1_PERIPH_DBGMCU RCC_APBENR1_DBGEN +#define LL_APB1_GRP1_PERIPH_PWR RCC_APBENR1_PWREN + +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APBENR2_SYSCFGEN +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APBENR2_TIM1EN +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APBENR2_SPI1EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APBENR2_USART1EN +#define LL_APB2_GRP1_PERIPH_TIM14 RCC_APBENR2_TIM14EN +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APBENR2_TIM16EN +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APBENR2_TIM17EN +#define LL_APB2_GRP1_PERIPH_ADC RCC_APBENR2_ADCEN + +/** + * @} + */ + +/** @defgroup BUS_LL_EC_IOP_GRP1_PERIPH IOP GRP1 PERIPH + * @{ + */ +#define LL_IOP_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_IOP_GRP1_PERIPH_GPIOA RCC_IOPENR_GPIOAEN +#define LL_IOP_GRP1_PERIPH_GPIOB RCC_IOPENR_GPIOBEN +#define LL_IOP_GRP1_PERIPH_GPIOC RCC_IOPENR_GPIOCEN +#if defined(STM32C031xx) +#define LL_IOP_GRP1_PERIPH_GPIOD RCC_IOPENR_GPIODEN +#endif +#define LL_IOP_GRP1_PERIPH_GPIOF RCC_IOPENR_GPIOFEN + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_EnableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHBENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHBENR FLASHEN LL_AHB1_GRP1_DisableClock\n + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ForceReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHBRSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n + * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHBSMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR SRAMSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHBSMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBSMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APBENR1 TIM3EN LL_APB1_GRP1_EnableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_EnableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_EnableClock\n + * APBENR1 PWREN LL_APB1_GRP1_EnableClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APBENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 DBGEN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR1, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APBENR1 TIM3EN LL_APB1_GRP1_DisableClock\n + * APBENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n + * APBENR1 WWDGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APBENR1 I2C1EN LL_APB1_GRP1_DisableClock\n + * APBENR1 DBGEN LL_APB1_GRP1_DisableClock\n + * APBENR1 PWREN LL_APB1_GRP1_DisableClock\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR1, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 WWDGRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ForceReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ForceReset\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APBRSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 RTCRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 WWDGRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 DBGRST LL_APB1_GRP1_ReleaseReset\n + * APBRSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR1, Periphs); +} + +/** + * @brief Enable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 DBGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APBSMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_RTC + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_DBGMCU + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR1, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_EnableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_EnableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APBENR2 ADCEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APBENR2, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APBENR2 SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 SPI1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 USART1EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM14EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM16EN LL_APB2_GRP1_DisableClock\n + * APBENR2 TIM17EN LL_APB2_GRP1_DisableClock\n + * APBENR2 ADCEN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBENR2, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ForceReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APBRSTR2 SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 USART1RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM14RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APBRSTR2 ADCRST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBRSTR2, Periphs); +} + +/** + * @brief Enable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APBSMENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APBSMENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APBSMENR2 SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM14SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APBSMENR2 ADCSMEN LL_APB2_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_ADC + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APBSMENR2, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_IOP IOP + * @{ + */ + +/** + * @brief Enable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_EnableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if IOP peripheral clock is enabled or not + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIODEN LL_IOP_GRP1_IsEnabledClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval State of Periphs (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IOP_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->IOPENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOBEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOCEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIODEN LL_IOP_GRP1_DisableClock\n + * IOPENR GPIOFEN LL_IOP_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPENR, Periphs); +} + +/** + * @brief Disable IOP peripherals clock. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ForceReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Release IOP peripherals reset. + * @rmtoll IOPRSTR GPIOARST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOBRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOCRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIODRST LL_IOP_GRP1_ReleaseReset\n + * IOPRSTR GPIOFRST LL_IOP_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_ALL + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPRSTR, Periphs); +} + +/** + * @brief Enable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_EnableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->IOPSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->IOPSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable IOP peripheral clocks in Sleep and Stop modes + * @rmtoll IOPSMENR GPIOASMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOBSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOCSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIODSMEN LL_IOP_GRP1_DisableClockStopSleep\n + * IOPSMENR GPIOFSMEN LL_IOP_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD + * @arg @ref LL_IOP_GRP1_PERIPH_GPIOF + * @retval None + */ +__STATIC_INLINE void LL_IOP_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->IOPSMENR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_BUS_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_cortex.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_cortex.h new file mode 100644 index 0000000000..446de6f3c4 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_cortex.h @@ -0,0 +1,588 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_CORTEX_H +#define STM32C0xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected + as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick + clock source. */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during + hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access + to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI + and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user + program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Architecture number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture + * @retval Value should be equal to 0xC for Cortex-M0+ devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC60 for Cortex-M0+ + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB + * or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB or @ref LL_MPU_REGION_SIZE_32KB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO + * or @ref LL_MPU_REGION_FULL_ACCESS or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, + uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_CORTEX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_crc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_crc.h new file mode 100644 index 0000000000..6664982b63 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_crc.h @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_crc.h + * @author MCD Application Team + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_CRC_H +#define STM32C0xx_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length + * @{ + */ +#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse + * @{ + */ +#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ +#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ +#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ +#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse + * @{ + */ +#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ +#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value + * @brief Normal representation of this polynomial value is + * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . + * @{ + */ +#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @note If Programmable Initial CRC value feature + * is available, also set the Data Register to the value stored in the + * CRC_INIT register, otherwise, reset Data Register to its default value. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + SET_BIT(CRCx->CR, CRC_CR_RESET); +} + +/** + * @brief Configure size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize + * @param CRCx CRC Instance + * @param PolySize This parameter can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) +{ + MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); +} + +/** + * @brief Return size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); +} + +/** + * @brief Configure the reversal of the bit order of the input data + * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); +} + +/** + * @brief Return type of reversal for input data bit order + * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + */ +__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); +} + +/** + * @brief Return type of reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + */ +__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); +} + +/** + * @brief Initialize the Programmable initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to write the correct value + * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. + * @rmtoll INIT INIT LL_CRC_SetInitialData + * @param CRCx CRC Instance + * @param InitCrc Value to be programmed in Programmable initial CRC value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) +{ + WRITE_REG(CRCx->INIT, InitCrc); +} + +/** + * @brief Return current Initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to read the correct value + * @rmtoll INIT INIT LL_CRC_GetInitialData + * @param CRCx CRC Instance + * @retval Value programmed in Programmable initial CRC value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->INIT)); +} + +/** + * @brief Initialize the Programmable polynomial value + * (coefficients of the polynomial to be used for CRC calculation). + * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_SetPolynomialCoef + * @param CRCx CRC Instance + * @param PolynomCoef Value to be programmed in Programmable Polynomial value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) +{ + WRITE_REG(CRCx->POL, PolynomCoef); +} + +/** + * @brief Return current Programmable polynomial value + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_GetPolynomialCoef + * @param CRCx CRC Instance + * @retval Value programmed in Programmable Polynomial value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->POL)); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Write given 16-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData16 + * @param CRCx CRC Instance + * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) +{ + __IO uint16_t *pReg; + + pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = InData; +} + +/** + * @brief Write given 8-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData8 + * @param CRCx CRC Instance + * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) +{ + *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return current CRC calculation result. 16 bits value is returned. + * @note This function is expected to be used in a 16 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData16 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). + */ +__STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx) +{ + return (uint16_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 8 bits value is returned. + * @note This function is expected to be used in a 8 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData8 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx) +{ + return (uint8_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 7 bits value is returned. + * @note This function is expected to be used in a 7 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData7 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx) +{ + return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_CRC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dma.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dma.h new file mode 100644 index 0000000000..ce8b0b53a6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dma.h @@ -0,0 +1,1528 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_DMA_H +#define STM32C0xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" +#include "stm32c0xx_ll_dmamux.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE) +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to + memory transfer directionis incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to + memory transfer direction is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment + (byte, half word, word)in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment + (byte, half word, word) in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function + @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function + @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + LL_DMA_CHANNEL_3) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ + +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == \ + ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == \ + ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + DMA1_Channel3) + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or + @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or + @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | \ + DMA_CCR_MSIZE | DMA_CCR_PL, Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CMAR)); +} + +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 2 are mapped to DMA1 channel 1 to 3. + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAx); + MODIFY_REG(((DMAMUX_Channel_TypeDef *)((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * (Channel - 1UL))))->CCR, + DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 2 are mapped to DMA1 channel 1 to 3. + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)(DMAx); + return (READ_BIT(((DMAMUX_Channel_TypeDef *)(((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * \ + (Channel - 1UL)))))->CCR, + DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Clear Channel 1 global interrupt flag. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel - 1U]))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_DMA_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dmamux.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dmamux.h new file mode 100644 index 0000000000..36a0f39c86 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_dmamux.h @@ -0,0 +1,1170 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_DMAMUX_H +#define STM32C0xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ + +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ + +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt*/ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0x00000000U /*!< memory to memory transfer */ +#define LL_DMAMUX_REQ_GENERATOR0 0x00000001U /*!< DMAMUX request generator 0 */ +#define LL_DMAMUX_REQ_GENERATOR1 0x00000002U /*!< DMAMUX request generator 1 */ +#define LL_DMAMUX_REQ_GENERATOR2 0x00000003U /*!< DMAMUX request generator 2 */ +#define LL_DMAMUX_REQ_GENERATOR3 0x00000004U /*!< DMAMUX request generator 3 */ +#define LL_DMAMUX_REQ_ADC1 0x00000005U /*!< DMAMUX ADC1 request */ +#define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_SPI1_RX 0x00000010U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 0x00000011U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_TIM1_CH1 0x00000014U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 0x00000015U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 0x00000016U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 0x00000017U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_TRIG_COM 0x00000018U /*!< DMAMUX TIM1 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM1_UP 0x00000019U /*!< DMAMUX TIM1 UP request */ +#define LL_DMAMUX_REQ_TIM3_CH1 0x00000020U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 0x00000021U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 0x00000022U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 0x00000023U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 0x00000024U /*!< DMAMUX TIM3 TRIG request */ +#define LL_DMAMUX_REQ_TIM3_UP 0x00000025U /*!< DMAMUX TIM3 UP request */ +#define LL_DMAMUX_REQ_TIM16_CH1 0x0000002CU /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_TRIG_COM 0x0000002DU /*!< DMAMUX TIM16 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM16_UP 0x0000002EU /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 0x0000002FU /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_TRIG_COM 0x00000030U /*!< DMAMUX TIM17 TRIG COM request */ +#define LL_DMAMUX_REQ_TIM17_UP 0x00000031U /*!< DMAMUX TIM17 UP request */ +#define LL_DMAMUX_REQ_USART1_RX 0x00000032U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 0x00000033U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 0x00000034U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 0x00000035U /*!< DMAMUX USART2 TX request */ + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event + on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event + on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on + rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX_SYNC_EXTI_LINE0 0x00000000U /*!< Synchronization signal from EXTI Line0 */ +#define LL_DMAMUX_SYNC_EXTI_LINE1 DMAMUX_CxCR_SYNC_ID_0 /*!< Synchronization signal from EXTI Line1 */ +#define LL_DMAMUX_SYNC_EXTI_LINE2 DMAMUX_CxCR_SYNC_ID_1 /*!< Synchronization signal from EXTI Line2 */ +#define LL_DMAMUX_SYNC_EXTI_LINE3 (DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE4 DMAMUX_CxCR_SYNC_ID_2 /*!< Synchronization signal from EXTI Line4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE5 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line5 */ +#define LL_DMAMUX_SYNC_EXTI_LINE6 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line6 */ +#define LL_DMAMUX_SYNC_EXTI_LINE7 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line7 */ +#define LL_DMAMUX_SYNC_EXTI_LINE8 DMAMUX_CxCR_SYNC_ID_3 /*!< Synchronization signal from EXTI Line8 */ +#define LL_DMAMUX_SYNC_EXTI_LINE9 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line9 */ +#define LL_DMAMUX_SYNC_EXTI_LINE10 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line10 */ +#define LL_DMAMUX_SYNC_EXTI_LINE11 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line11 */ +#define LL_DMAMUX_SYNC_EXTI_LINE12 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from EXTI Line12 */ +#define LL_DMAMUX_SYNC_EXTI_LINE13 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE14 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line1 4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE15 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line1 5 */ +#define LL_DMAMUX_SYNC_DMAMUX_CH0 DMAMUX_CxCR_SYNC_ID_4 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH1 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel1 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH2 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DMAMUX channel2 Event */ +#define LL_DMAMUX_SYNC_TIM14_OC (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from TIM14 OC */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request + generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request + generation on event on rising + edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request + generation on event on falling + edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request + generation on rising and + falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE0 0x00000000U /*!< Request signal generation from EXTI Line0 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE1 DMAMUX_RGxCR_SIG_ID_0 /*!< Request signal generation from EXTI Line1 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE2 DMAMUX_RGxCR_SIG_ID_1 /*!< Request signal generation from EXTI Line2 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE3 (DMAMUX_RGxCR_SIG_ID_1 |DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line3 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE4 DMAMUX_RGxCR_SIG_ID_2 /*!< Request signal generation from EXTI Line4 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE5 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line5 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE6 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line6 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE7 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line7 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE8 DMAMUX_RGxCR_SIG_ID_3 /*!< Request signal generation from EXTI Line8 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE9 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line9 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE10 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line10 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE11 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line11 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE12 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from EXTI Line12 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE13 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line13 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE14 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line14 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE15 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line15 */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH0 DMAMUX_RGxCR_SIG_ID_4 /*!< Request signal generation from DMAMUX channel0 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH1 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel1 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH2 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DMAMUX channel2 Event */ +#define LL_DMAMUX_REQ_GEN_TIM14_OC (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from TIM14 OC */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 2 are mapped to DMA1 channel 1 to 3. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 2 are mapped to DMA1 channel 1 to 3. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_TRIG_COM + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA + request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ, ((RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos)); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA + request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ)) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, + DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * \ + (RequestGenChannel)))))->RGCR, + DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ, + (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * \ + (RequestGenChannel)))))->RGCR, + DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, + uint32_t RequestSignalID) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * + (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID, + RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_TIM14_OC + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + + (DMAMUX_RGCR_SIZE * \ + (RequestGenChannel)))))->RGCR, + DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL);; +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL);; +} + + +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL);; +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL);; +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL);; +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL);; +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? \ + 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_DMAMUX_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_exti.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_exti.h new file mode 100644 index 0000000000..10c26857b8 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_exti.h @@ -0,0 +1,1067 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_EXTI_H +#define STM32C0xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +#define LL_EXTI_REGISTER_PINPOS_SHFT 16u /*!< Define used to shift pin position in EXTICR register */ + +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#define LL_EXTI_LINE_ALL_0_31 0xFFFFFFFFU /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup EXTI_LL_EC_CONFIG_PORT EXTI CONFIG PORT + * @{ + */ +#define LL_EXTI_CONFIG_PORTA 0U /*!< EXTI PORT A */ +#define LL_EXTI_CONFIG_PORTB EXTI_EXTICR1_EXTI0_0 /*!< EXTI PORT B */ +#define LL_EXTI_CONFIG_PORTC EXTI_EXTICR1_EXTI0_1 /*!< EXTI PORT C */ +#if defined(GPIOD_BASE) +#define LL_EXTI_CONFIG_PORTD (EXTI_EXTICR1_EXTI0_1|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT D */ +#endif /*GPIOD_BASE*/ +#define LL_EXTI_CONFIG_PORTF (EXTI_EXTICR1_EXTI0_2|EXTI_EXTICR1_EXTI0_0) /*!< EXTI PORT F */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_CONFIG_LINE EXTI CONFIG LINE + * @{ + */ +#define LL_EXTI_CONFIG_LINE0 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE1 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE2 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_16 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE3 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_POSITION_24 | EXTICR[0] */ +#define LL_EXTI_CONFIG_LINE4 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE5 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE6 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_16 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE7 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_POSITION_24 | EXTICR[1] */ +#define LL_EXTI_CONFIG_LINE8 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE9 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE10 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_16 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE11 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_POSITION_24 | EXTICR[2] */ +#define LL_EXTI_CONFIG_LINE12 ((0uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE13 ((8uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE14 ((16uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_16 | EXTICR[3] */ +#define LL_EXTI_CONFIG_LINE15 ((24uL << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /*!< EXTI_POSITION_24 | EXTICR[3] */ +/** + * @} + */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); + +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Falling Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_IsActiveFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFallingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Read ExtLine Combination Falling Flag for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ReadFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFallingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->FPR1, ExtiLine)); +} + +/** + * @brief Clear ExtLine Falling Flags for Lines in range 0 to 31 + * @note This bit is set when the falling edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll FPR1 FPIFx LL_EXTI_ClearFallingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFallingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->FPR1, ExtiLine); +} + +/** + * @brief Check if the ExtLine Rising Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_IsActiveRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveRisingFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RPR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Read ExtLine Combination Rising Flag for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ReadRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadRisingFlag_0_31(uint32_t ExtiLine) +{ + return (READ_BIT(EXTI->RPR1, ExtiLine)); +} + +/** + * @brief Clear ExtLine Rising Flags for Lines in range 0 to 31 + * @note This bit is set when the Rising edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll RPR1 RPIFx LL_EXTI_ClearRisingFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearRisingFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->RPR1, ExtiLine); +} + +/** + * @} + */ +/** @defgroup EXTI_LL_EF_Config EF configuration functions + * @{ + */ + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(EXTI->EXTICR[Line & 0x03u], EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), Port << \ + (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll EXTI_EXTICR1 EXTI0 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI1 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI2 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR1 EXTI3 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI4 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI5 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI6 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR2 EXTI7 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI8 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI9 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI10 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR3 EXTI11 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI12 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI13 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI14 LL_EXTI_SetEXTISource\n + * EXTI_EXTICR4 EXTI15 LL_EXTI_SetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_EXTI_CONFIG_LINE0 + * @arg @ref LL_EXTI_CONFIG_LINE1 + * @arg @ref LL_EXTI_CONFIG_LINE2 + * @arg @ref LL_EXTI_CONFIG_LINE3 + * @arg @ref LL_EXTI_CONFIG_LINE4 + * @arg @ref LL_EXTI_CONFIG_LINE5 + * @arg @ref LL_EXTI_CONFIG_LINE6 + * @arg @ref LL_EXTI_CONFIG_LINE7 + * @arg @ref LL_EXTI_CONFIG_LINE8 + * @arg @ref LL_EXTI_CONFIG_LINE9 + * @arg @ref LL_EXTI_CONFIG_LINE10 + * @arg @ref LL_EXTI_CONFIG_LINE11 + * @arg @ref LL_EXTI_CONFIG_LINE12 + * @arg @ref LL_EXTI_CONFIG_LINE13 + * @arg @ref LL_EXTI_CONFIG_LINE14 + * @arg @ref LL_EXTI_CONFIG_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref EXTI_LL_EC_CONFIG_PORT + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_EXTI_GetEXTISource(uint32_t Line) +{ + return (READ_BIT(EXTI->EXTICR[Line & 0x03u], (EXTI_EXTICR1_EXTI0 << (Line >> LL_EXTI_REGISTER_PINPOS_SHFT))) >> \ + (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +ErrorStatus LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32U5xx_LL_EXTI_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_gpio.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_gpio.h new file mode 100644 index 0000000000..921d8f5e4a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_gpio.h @@ -0,0 +1,989 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_GPIO_H +#define STM32C0xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOF) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function + @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function + @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function + @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function + @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function + @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, + (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U)), + (Speed << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, + (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, + (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), + (Alternate << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), + (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); +} + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOF) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_GPIO_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_i2c.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_i2c.h new file mode 100644 index 0000000000..4518007e42 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_i2c.h @@ -0,0 +1,2272 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_I2C_H +#define STM32C0xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (I2C1) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + SlaveAddr | SlaveAddrSize | (TransferSize << I2C_CR2_NBYTES_Pos) | EndMode | Request); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_I2C_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_iwdg.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_iwdg.h new file mode 100644 index 0000000000..81e88b9fb5 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_iwdg.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_IWDG_H +#define STM32C0xx_LL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(IWDG) + +/** @defgroup IWDG_LL IWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants + * @{ + */ +#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */ +#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */ +#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */ +#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_IWDG_ReadReg function + * @{ + */ +#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */ +#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */ +#define LL_IWDG_SR_WVU IWDG_SR_WVU /*!< Watchdog counter window value update */ +/** + * @} + */ + +/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider + * @{ + */ +#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */ +#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */ +#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */ +#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */ +#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */ +#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */ +#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions + * @{ + */ +/** @defgroup IWDG_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Start the Independent Watchdog + * @note Except if the hardware watchdog option is selected + * @rmtoll KR KEY LL_IWDG_Enable + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE); +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * @rmtoll KR KEY LL_IWDG_ReloadCounter + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD); +} + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_EnableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE); +} + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_DisableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE); +} + +/** + * @brief Select the prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_SetPrescaler + * @param IWDGx IWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler) +{ + WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler); +} + +/** + * @brief Get the selected prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_GetPrescaler + * @param IWDGx IWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + */ +__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->PR)); +} + +/** + * @brief Specify the IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_SetReloadCounter + * @param IWDGx IWDG Instance + * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter) +{ + WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter); +} + +/** + * @brief Get the specified IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_GetReloadCounter + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->RLR)); +} + +/** + * @brief Specify high limit of the window value to be compared to the down-counter. + * @rmtoll WINR WIN LL_IWDG_SetWindow + * @param IWDGx IWDG Instance + * @param Window Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetWindow(IWDG_TypeDef *IWDGx, uint32_t Window) +{ + WRITE_REG(IWDGx->WINR, IWDG_WINR_WIN & Window); +} + +/** + * @brief Get the high limit of the window value specified. + * @rmtoll WINR WIN LL_IWDG_GetWindow + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetWindow(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->WINR)); +} + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if flag Prescaler Value Update is set or not + * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Reload Value Update is set or not + * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Window Value Update is set or not + * @rmtoll SR WVU LL_IWDG_IsActiveFlag_WVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_WVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_WVU) == (IWDG_SR_WVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not + * @rmtoll SR PVU LL_IWDG_IsReady\n + * SR RVU LL_IWDG_IsReady\n + * SR WVU LL_IWDG_IsReady + * @param IWDGx IWDG Instance + * @retval State of bits (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU | IWDG_SR_WVU) == 0U) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* IWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_IWDG_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_pwr.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_pwr.h new file mode 100644 index 0000000000..57470d0726 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_pwr.h @@ -0,0 +1,949 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_PWR_H +#define STM32C0xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_SCR_CSBF PWR_SCR_CSBF +#define LL_PWR_SCR_CWUF PWR_SCR_CWUF +#define LL_PWR_SCR_CWUF6 PWR_SCR_CWUF6 +#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4 +#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3 +#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2 +#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_SR1_WUFI PWR_SR1_WUFI +#define LL_PWR_SR1_SBF PWR_SR1_SBF +#define LL_PWR_SR1_WUF6 PWR_SR1_WUF6 +#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4 +#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3 +#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2 +#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1 +/** + * @} + */ + + +/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR + * @{ + */ +#define LL_PWR_MODE_STOP0 (0x00000000UL) +#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1|PWR_CR1_LPMS_0) +#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2) +/** + * @} + */ + + +/** @defgroup PWR_LL_EC_WAKEUP WAKEUP + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1) +#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2) +#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3) +#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4) +#define LL_PWR_WAKEUP_PIN6 (PWR_CR3_EWUP6) +/** + * @} + */ + + +/** @defgroup PWR_LL_EC_GPIO GPIO + * @{ + */ +#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA))) +#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB))) +#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC))) +#if defined(STM32C031xx) +#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD))) +#endif /* STM32C031xx */ +#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF))) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT + * @{ + */ +#define LL_PWR_GPIO_BIT_0 0x00000001u +#define LL_PWR_GPIO_BIT_1 0x00000002u +#define LL_PWR_GPIO_BIT_2 0x00000004u +#define LL_PWR_GPIO_BIT_3 0x00000008u +#define LL_PWR_GPIO_BIT_4 0x00000010u +#define LL_PWR_GPIO_BIT_5 0x00000020u +#define LL_PWR_GPIO_BIT_6 0x00000040u +#define LL_PWR_GPIO_BIT_7 0x00000080u +#define LL_PWR_GPIO_BIT_8 0x00000100u +#define LL_PWR_GPIO_BIT_9 0x00000200u +#define LL_PWR_GPIO_BIT_10 0x00000400u +#define LL_PWR_GPIO_BIT_11 0x00000800u +#define LL_PWR_GPIO_BIT_12 0x00001000u +#define LL_PWR_GPIO_BIT_13 0x00002000u +#define LL_PWR_GPIO_BIT_14 0x00004000u +#define LL_PWR_GPIO_BIT_15 0x00008000u +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BKP BACKUP + * @{ + */ +#define LL_PWR_BKP_NUMBER 4U +#define LL_PWR_BKP_DR0 0U +#define LL_PWR_BKP_DR1 1U +#define LL_PWR_BKP_DR2 2U +#define LL_PWR_BKP_DR3 3U + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Flash Power-down mode during sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_EnableFlashPowerDownInSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInSleep(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_SLP); +} + +/** + * @brief Disable Flash Power-down mode during sleep mode + * @rmtoll CR1 CFIPD_SLP LL_PWR_DisableFlashPowerDownInSleep + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInSleep(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_SLP); +} + +/** + * @brief Check if flash power-down mode during sleep mode domain is enabled + * @rmtoll CR1 CFIPD_SLP LL_PWR_IsEnableFlashPowerDownInSleep + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInSleep(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_SLP) == (PWR_CR1_FPD_SLP)) ? 1UL : 0UL); +} + +/** + * @brief Enable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_EnableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInStop(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Disable Flash Power-down mode during stop mode + * @rmtoll CR1 CFIPD_STOP LL_PWR_DisableFlashPowerDownInStop + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInStop(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_STOP); +} + +/** + * @brief Check if flash power-down mode during stop mode domain is enabled + * @rmtoll CR1 CFIPD_STOP LL_PWR_IsEnableFlashPowerDownInStop + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInStop(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_STOP) == (PWR_CR1_FPD_STOP)) ? 1UL : 0UL); +} + +/** + * @brief Set Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_SetPowerMode + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode); +} + +/** + * @brief Get Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS)); +} + +/** + * @brief Enable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_EnableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableInternWU(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Disable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_DisableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableInternWU(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + +/** + * @brief Check if Internal Wake-up line is enabled + * @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_EIWUL) == (PWR_CR3_EIWUL)) ? 1UL : 0UL); +} + +/** + * @brief Enable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_EnablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_DisablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Check if pull-up and pull-down configuration is enabled + * @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC)) ? 1UL : 0UL); +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP2 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP3 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP4 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP6 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP2 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP3 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP4 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP6 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP6 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityLow\n + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP6 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP6 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n + * (+) Port D is available only for STM32C031xx devices. + * PUCRF PU0-15 LL_PWR_EnableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Disable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n + * (+) Port D is available only for STM32C031xx devices. + * PUCRF PU0-15 LL_PWR_DisableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Check if GPIO pull-up state is enabled + * @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * (+) Port D is available only for STM32C031xx devices. + * PUCRF PU0-15 LL_PWR_IsEnabledGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n + * (+) Port D is available only for STM32C031xx devices. + * PDCRF PD0-15 LL_PWR_EnableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n + * (+) Port D is available only for STM32C031xx devices. + * PDCRF PD0-15 LL_PWR_DisableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Check if GPIO pull-down state is enabled + * @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * (+) Port D is available only for STM32C031xx devices. + * PDCRF PD0-15 LL_PWR_IsEnabledGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * (+) Port D is available only for STM32C031xx devices. + * @arg @ref LL_PWR_GPIO_F + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified Backup data register. + * @rmtoll PWR_BKPREGx BKP LL_PWR_BKP_SetRegister + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_PWR_BKP_DR0 + * @arg @ref LL_PWR_BKP_DR1 + * @arg @ref LL_PWR_BKP_DR2 + * @arg @ref LL_PWR_BKP_DR3 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_PWR_BKP_SetRegister(uint32_t BackupRegister, uint16_t Data) +{ + __IO uint32_t tmp; + + tmp = (uint32_t)(&(PWR->BKPREG1)); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint16_t)Data; +} + +/** + * @brief Reads data from the specified Backup data Register. + * @rmtoll PWR_BKPREGx BKP LL_PWR_BKP_GetRegister + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_PWR_BKP_DR0 + * @arg @ref LL_PWR_BKP_DR1 + * @arg @ref LL_PWR_BKP_DR2 + * @arg @ref LL_PWR_BKP_DR3 + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_PWR_BKP_GetRegister(uint32_t BackupRegister) +{ + uint32_t tmp; + + tmp = (uint32_t)(&(PWR->BKPREG1)); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Wake-up line Flag + * @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL); +} + +/** + * @brief Get Stand-By Flag + * @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 6 + * @rmtoll SR1 WUF6 LL_PWR_IsActiveFlag_WU6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF6) == (PWR_SR1_WUF6)) ? 1UL : 0UL); +} + + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 3 + * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL); +} + + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stand-By Flag + * @rmtoll SCR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll SCR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF); +} + +/** + * @brief Clear Wake-up Flag 6 + * @rmtoll SCR CWUF6 LL_PWR_ClearFlag_WU6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF6); +} + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF4); +} + +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF3); +} + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF1); +} + +/** + * @brief Indicate whether or not the flash is ready to be accessed + * @rmtoll SR2 FLASH_RDY LL_PWR_IsActiveFlag_FLASH_RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_FLASH_RDY(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_FLASH_RDY) == (PWR_SR2_FLASH_RDY)) ? 1UL : 0UL); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_PWR_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rcc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rcc.h new file mode 100644 index 0000000000..9b7622f7b2 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rcc.h @@ -0,0 +1,1794 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_RCC_H +#define STM32C0xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 48000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 48000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_PWRRSTF RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_CSR1_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_CSR1_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_CSR1_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_CSR1_LSCOSEL /*!< LSE selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI 0x00000000U /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_0 /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSI (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< LSI selection used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_LSE RCC_CFGR_SW_2 /*!< LSE selection used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_0 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSI (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< LSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_LSE RCC_CFGR_SWS_2 /*!< LSE used as system clock */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup LL_RCC_SYSCLK_Clock_Source RCC HCLK Clock Source + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< HCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< HCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< HCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< HCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< HCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< HCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1) /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 (RCC_CFGR_PPRE_2 | RCC_CFGR_PPRE_1 | RCC_CFGR_PPRE_0) /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSI_DIV HSI division factor + * @{ + */ +#define LL_RCC_HSI_DIV_1 0x00000000U /*!< HSI not divided */ +#define LL_RCC_HSI_DIV_2 RCC_CR_HSIDIV_0 /*!< HSI divided by 2 */ +#define LL_RCC_HSI_DIV_4 RCC_CR_HSIDIV_1 /*!< HSI divided by 4 */ +#define LL_RCC_HSI_DIV_8 (RCC_CR_HSIDIV_1 | RCC_CR_HSIDIV_0) /*!< HSI divided by 8 */ +#define LL_RCC_HSI_DIV_16 RCC_CR_HSIDIV_2 /*!< HSI divided by 16 */ +#define LL_RCC_HSI_DIV_32 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_0) /*!< HSI divided by 32 */ +#define LL_RCC_HSI_DIV_64 (RCC_CR_HSIDIV_2 | RCC_CR_HSIDIV_1) /*!< HSI divided by 64 */ +#define LL_RCC_HSI_DIV_128 RCC_CR_HSIDIV /*!< HSI divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSIKER_DIV HSI Kernel division factor + * @{ + */ +#define LL_RCC_HSIKER_DIV_1 0x00000000U /*!< HSI kernel not divided */ +#define LL_RCC_HSIKER_DIV_2 RCC_CR_HSIKERDIV_0 /*!< HSI kernel divided by 2 */ +#define LL_RCC_HSIKER_DIV_3 RCC_CR_HSIKERDIV_1 /*!< HSI kernel divided by 3 */ +#define LL_RCC_HSIKER_DIV_4 (RCC_CR_HSIKERDIV_1 | RCC_CR_HSIKERDIV_0) /*!< HSI kernel divided by 4 */ +#define LL_RCC_HSIKER_DIV_5 RCC_CR_HSIKERDIV_2 /*!< HSI kernel divided by 5 */ +#define LL_RCC_HSIKER_DIV_6 (RCC_CR_HSIKERDIV_2 | RCC_CR_HSIKERDIV_0) /*!< HSI kernel divided by 6 */ +#define LL_RCC_HSIKER_DIV_7 (RCC_CR_HSIKERDIV_2 | RCC_CR_HSIKERDIV_1) /*!< HSI kernel divided by 7 */ +#define LL_RCC_HSIKER_DIV_8 RCC_CR_HSIKERDIV /*!< HSI kernel divided by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO1 not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO1 divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO1 divided by 4 */ +#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO1 divided by 16 */ +#define LL_RCC_MCO1_DIV_32 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 32 */ +#define LL_RCC_MCO1_DIV_64 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1) /*!< MCO1 divided by 64 */ +#define LL_RCC_MCO1_DIV_128 (RCC_CFGR_MCOPRE_2 | RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO1 divided by 128 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO2SOURCE MCO2 SOURCE selection + * @{ + */ +#define LL_RCC_MCO2SOURCE_NOCLOCK 0x00000000U /*!< MCO2 output disabled, no clock on MCO2 */ +#define LL_RCC_MCO2SOURCE_SYSCLK RCC_CFGR_MCO2SEL_0 /*!< SYSCLK selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSI (RCC_CFGR_MCO2SEL_0| RCC_CFGR_MCO2SEL_1) /*!< HSI16 selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2SEL_2 /*!< HSE selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSI (RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_2) /*!< LSI selection as MCO2 source */ +#define LL_RCC_MCO2SOURCE_LSE (RCC_CFGR_MCO2SEL_0|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_2) /*!< LSE selection as MCO2 source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO2_DIV MCO2 prescaler + * @{ + */ +#define LL_RCC_MCO2_DIV_1 0x00000000U /*!< MCO2 not divided */ +#define LL_RCC_MCO2_DIV_2 RCC_CFGR_MCO2PRE_0 /*!< MCO2 divided by 2 */ +#define LL_RCC_MCO2_DIV_4 RCC_CFGR_MCO2PRE_1 /*!< MCO2 divided by 4 */ +#define LL_RCC_MCO2_DIV_8 (RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 8 */ +#define LL_RCC_MCO2_DIV_16 RCC_CFGR_MCO2PRE_2 /*!< MCO2 divided by 16 */ +#define LL_RCC_MCO2_DIV_32 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 32 */ +#define LL_RCC_MCO2_DIV_64 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1) /*!< MCO2 divided by 64 */ +#define LL_RCC_MCO2_DIV_128 (RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_0) /*!< MCO2 divided by 128 */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK1 ((RCC_CCIPR_USART1SEL << 16U) | 0x00000000U) /*!< PCLK1 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSIKER ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSIKER clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */ + +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_HSIKER RCC_CCIPR_I2C1SEL_1 /*!< HSIKER clock used as I2C1 clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2S1_CLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#define LL_RCC_I2S1_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_HSIKER RCC_CCIPR_I2S1SEL_1 /*!< HSIKER clock used as I2S1 clock source */ +#define LL_RCC_I2S1_CLKSOURCE_PIN RCC_CCIPR_I2S1SEL /*!< External clock used as I2S1 clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_HSIKER RCC_CCIPR_ADCSEL /*!< HSIKER kernel used as ADC clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USARTx get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE RCC_CCIPR_I2C1SEL /*!< I2C1 Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2S1 Peripheral I2S get clock source + * @{ + */ +#define LL_RCC_I2S1_CLKSOURCE RCC_CCIPR_I2S1SEL /*!< I2S1 Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_CSR1_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_CSR1_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_CSR1_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG((RCC->__REG__), (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__,__AHBPRESCALER__) ((__SYSCLKFREQ__) >> (AHBPrescTable[((__AHBPRESCALER__)\ + & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU)) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> (APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos]\ + & 0x1FU)) + +/** + * @brief Helper macro to calculate the HSISYS frequency + * @param __HSIDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval HSISYS clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HSI_FREQ(__HSIDIV__) (HSI_VALUE / (1U << ((__HSIDIV__)>> RCC_CR_HSIDIV_Pos))) + +/** + * @brief Helper macro to calculate the HSI Kernel frequency + * @param __HSIKERDIV__ This parameter can be one of the following values: + * @arg @ref LL_RCC_HSIKER_DIV_1 + * @arg @ref LL_RCC_HSIKER_DIV_2 + * @arg @ref LL_RCC_HSIKER_DIV_3 + * @arg @ref LL_RCC_HSIKER_DIV_4 + * @arg @ref LL_RCC_HSIKER_DIV_5 + * @arg @ref LL_RCC_HSIKER_DIV_6 + * @arg @ref LL_RCC_HSIKER_DIV_7 + * @arg @ref LL_RCC_HSIKER_DIV_8 + * @retval HSIKER clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HSIKER_FREQ(__HSIKERDIV__) (HSI_VALUE / (((__HSIKERDIV__)>> RCC_CR_HSIKERDIV_Pos) +1U)) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI even in stop mode + * @note HSI oscillator is forced ON even in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI in stop mode is enabled + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON)) ? 1UL : 0UL); +} + +/** + * @brief Set HSIKER divider + * @rmtoll CR HSIKERDIV LL_RCC_HSIKER_SetDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSIKER_DIV_1 + * @arg @ref LL_RCC_HSIKER_DIV_2 + * @arg @ref LL_RCC_HSIKER_DIV_3 + * @arg @ref LL_RCC_HSIKER_DIV_4 + * @arg @ref LL_RCC_HSIKER_DIV_5 + * @arg @ref LL_RCC_HSIKER_DIV_6 + * @arg @ref LL_RCC_HSIKER_DIV_7 + * @arg @ref LL_RCC_HSIKER_DIV_8 + * @retval None. + */ +__STATIC_INLINE void LL_RCC_HSIKER_SetDivider(uint32_t Divider) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIKERDIV, Divider); +} + +/** + * @brief Get HSIKER divider + * @rmtoll CR HSIKERDIV LL_RCC_HSIKER_GetDivider + * @retval can be one of the following values: + * @arg @ref LL_RCC_HSIKER_DIV_1 + * @arg @ref LL_RCC_HSIKER_DIV_2 + * @arg @ref LL_RCC_HSIKER_DIV_3 + * @arg @ref LL_RCC_HSIKER_DIV_4 + * @arg @ref LL_RCC_HSIKER_DIV_5 + * @arg @ref LL_RCC_HSIKER_DIV_6 + * @arg @ref LL_RCC_HSIKER_DIV_7 + * @arg @ref LL_RCC_HSIKER_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_HSIKER_GetDivider(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIKERDIV)); +} + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + + +/** + * @brief Set HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_SetDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval None. + */ +__STATIC_INLINE void LL_RCC_HSI_SetDivider(uint32_t Divider) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, Divider); +} + +/** + * @brief Get HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_GetDivider + * @retval can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetDivider(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64, which, when added to the HSICAL value, + * should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll CSR1 LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll CSR1 LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll CSR1 LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll CSR1 LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll CSR1 LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->CSR1, RCC_CSR1_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll CSR1 LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->CSR1, RCC_CSR1_LSEDRV)); +} + +/** + * @brief Enable Clock security system on LSE. + * @rmtoll CSR1 LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll CSR1 LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSECSSON); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll CSR1 LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->CSR1, RCC_CSR1_LSERDY) == (RCC_CSR1_LSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll CSR1 LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return ((READ_BIT(RCC->CSR1, RCC_CSR1_LSECSSD) == (RCC_CSR1_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR2 LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR2, RCC_CSR2_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR2 LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR2, RCC_CSR2_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR2 LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_LSIRDY) == (RCC_CSR2_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Enable Low speed clock + * @rmtoll CSR1 LSCOEN LL_RCC_LSCO_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Enable(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_LSCOEN); +} + +/** + * @brief Disable Low speed clock + * @rmtoll CSR1 LSCOEN LL_RCC_LSCO_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Disable(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSCOEN); +} + +/** + * @brief Configure Low speed clock selection + * @rmtoll CSR1 LSCOSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->CSR1, RCC_CSR1_LSCOSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll CSR1 LSCOSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CSR1, RCC_CSR1_LSCOSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler); +} + +/** + * @brief Set HSI48 division factor + * @rmtoll CR HSIDIV LL_RCC_SetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @param HSIDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHSIDiv(uint32_t HSIDiv) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, HSIDiv); +} + +/** + * @brief Set HSIKER division factor + * @rmtoll CR HSIKERDIV LL_RCC_SetHSIKERDiv + * @param HSIKERDiv This parameter can be one of the following values: + * @arg @ref LL_RCC_HSIKER_DIV_1 + * @arg @ref LL_RCC_HSIKER_DIV_2 + * @arg @ref LL_RCC_HSIKER_DIV_3 + * @arg @ref LL_RCC_HSIKER_DIV_4 + * @arg @ref LL_RCC_HSIKER_DIV_5 + * @arg @ref LL_RCC_HSIKER_DIV_6 + * @arg @ref LL_RCC_HSIKER_DIV_7 + * @arg @ref LL_RCC_HSIKER_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHSIKERDiv(uint32_t HSIKERDiv) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIKERDIV, HSIKERDiv); +} +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE)); +} + +/** + * @brief Get HSI48 Division factor + * @rmtoll CR HSIDIV LL_RCC_GetHSIDiv + * @note HSIDIV parameter is only applied to SYSCLK_Frequency when HSI is used as + * system clock source. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV_1 + * @arg @ref LL_RCC_HSI_DIV_2 + * @arg @ref LL_RCC_HSI_DIV_4 + * @arg @ref LL_RCC_HSI_DIV_8 + * @arg @ref LL_RCC_HSI_DIV_16 + * @arg @ref LL_RCC_HSI_DIV_32 + * @arg @ref LL_RCC_HSI_DIV_64 + * @arg @ref LL_RCC_HSI_DIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_GetHSIDiv(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n + * CFGR MCO1PRE LL_RCC_ConfigMCO\n + * CFGR MCO2 LL_RCC_ConfigMCO\n + * CFGR MCO2PRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_16 + * @arg @ref LL_RCC_MCO1_DIV_32 + * @arg @ref LL_RCC_MCO1_DIV_64 + * @arg @ref LL_RCC_MCO1_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO2 MCO2 + * @{ + */ + +/** + * @brief Configure MCO2 + * @rmtoll CFGR MCO2SEL LL_RCC_ConfigMCO2\n + * CFGR MCO2PRE LL_RCC_ConfigMCO2 + * @note feature not available in all devices. + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSI + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @arg @ref LL_RCC_MCO2SOURCE_LSE + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_16 + * @arg @ref LL_RCC_MCO2_DIV_32 + * @arg @ref LL_RCC_MCO2_DIV_64 + * @arg @ref LL_RCC_MCO2_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO2(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO2SEL | RCC_CFGR_MCO2PRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSIKER + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU)); +} + + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSIKER + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, I2CxSource); +} + + +/** + * @brief Configure ADC clock source + * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSIKER + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); +} + +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR I2S1SEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSIKER + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, I2SxSource); +} + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR USART1SEL LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSIKER + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U)); +} + + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR I2C1SEL LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSIKER + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Cx)); +} + +/** + * @brief Get ADCx clock source + * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSIKER + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); +} + +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR I2S LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE_PIN + * @arg @ref LL_RCC_I2S1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2S1_CLKSOURCE_HSIKER + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll CSR1 RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CSR1, RCC_CSR1_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll CSR1 RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CSR1, RCC_CSR1_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll CSR1 RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll CSR1 RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll CSR1 RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->CSR1, RCC_CSR1_RTCEN) == (RCC_CSR1_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll CSR1 RTCRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_RTCRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll CSR1 RTCRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_RTCRST); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSSC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR2 IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_IWDGRSTF) == (RCC_CSR2_IWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR2 LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_LPWRRSTF) == (RCC_CSR2_LPWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Option byte reset is set or not. + * @rmtoll CSR2 OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_OBLRSTF) == (RCC_CSR2_OBLRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR2 PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_PINRSTF) == (RCC_CSR2_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR2 SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_SFTRSTF) == (RCC_CSR2_SFTRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR2 WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_WWDGRSTF) == (RCC_CSR2_WWDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR or POR/PDR reset is set or not. + * @rmtoll CSR2 PWRRSTF LL_RCC_IsActiveFlag_PWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PWRRST(void) +{ + return ((READ_BIT(RCC->CSR2, RCC_CSR2_PWRRSTF) == (RCC_CSR2_PWRRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR2 RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR2, RCC_CSR2_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +uint32_t LL_RCC_GetRTCClockFreq(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_RCC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rtc.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rtc.h new file mode 100644 index 0000000000..9a8f1a9a73 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_rtc.h @@ -0,0 +1,2457 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_RTC_H +#define STM32C0xx_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_LL_INIT_MASK 0xFFFFFFFFU +#define RTC_LL_RSF_MASK 0xFFFFFF5FU + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) +#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) +#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY (uint32_t)24U +#define RTC_OFFSET_DAY (uint32_t)16U +#define RTC_OFFSET_MONTH (uint32_t)8U +#define RTC_OFFSET_HOUR (uint32_t)16U +#define RTC_OFFSET_MINUTE (uint32_t)8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A. + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday() + for ALARM A + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay() + for ALARM A. + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay() + for ALARM A. + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN 0x000000000U /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD 0x000000001U /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#define LL_RTC_SCR_ITSF RTC_SCR_CITSF +#define LL_RTC_SCR_TSOVF RTC_SCR_CTSOVF +#define LL_RTC_SCR_TSF RTC_SCR_CTSF +#define LL_RTC_SCR_ALRAF RTC_SCR_CALRAF + +#define LL_RTC_ICSR_RECALPF RTC_ICSR_RECALPF +#define LL_RTC_ICSR_INITF RTC_ICSR_INITF +#define LL_RTC_ICSR_RSF RTC_ICSR_RSF +#define LL_RTC_ICSR_INITS RTC_ICSR_INITS +#define LL_RTC_ICSR_SHPF RTC_ICSR_SHPF +#define LL_RTC_ICSR_ALRAWF RTC_ICSR_ALRAWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thrusday */ +#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ +#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ +#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ +#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ +#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ +#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ +#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ +#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ +#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ +#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ +#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN RTC_CR_TAMPALRM_TYPE /*!< RTC_ALARM is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL 0x00000000U /*!< RTC_ALARM is push-pull output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF is asserted (depending on OSEL)*/ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ +#define LL_RTC_CALIB_OUTPUT_512HZ RTC_CR_COE /*!< Calibration output is 512 Hz */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)((((uint8_t)((__VALUE__)\ + & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U ) + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll RTC_CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll RTC_CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} + +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TAMPALRM_TYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @rmtoll RTC_CR TAMPALRM_TYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_TYPE)); +} + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll RTC_ICSR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + WRITE_REG(RTCx->ICSR, RTC_LL_INIT_MASK); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll RTC_ICSR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + WRITE_REG(RTCx->ICSR, (uint32_t)~RTC_ICSR_INIT); +} + +/** + * @brief Set Output polarity (pin is low when ALRAF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll RTC_CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} + +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll RTC_CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll RTC_CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_EnableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_CR REFCKON LL_RTC_DisableRefClock + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON); +} + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll RTC_PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll RTC_WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + + +/** + * @brief Enable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableAlarmPullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Disable internal pull-up in output mode. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_EnableAlarmPullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableAlarmPullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU); +} + +/** + * @brief Check if internal pull-up in output mode is enabled or not. + * @rmtoll RTC_CR TAMPALRM_PU LL_RTC_IsAlarmPullUpEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsAlarmPullUpEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TAMPALRM_PU) == (RTC_CR_TAMPALRM_PU)) ? 1UL : 0UL); +} + +/** + * @brief Enable RTC_OUT2 output + * @note RTC_OUT2 mapping depends on both OSEL (@ref LL_RTC_SetAlarmOutEvent) + * and COE (@ref LL_RTC_CAL_SetOutputFreq) settings. + * @note RTC_OUT2 is not available ins VBAT mode. + * @rmtoll RTC_CR OUT2EN LL_RTC_EnableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableOutput2(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Disable RTC_OUT2 output + * @rmtoll RTC_CR OUT2EN LL_RTC_DisableOutput2 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableOutput2(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_OUT2EN); +} + +/** + * @brief Check if RTC_OUT2 output is enabled or not. + * @rmtoll RTC_CR OUT2EN LL_RTC_IsOutput2Enabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsOutput2Enabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_OUT2EN) == (RTC_CR_OUT2EN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll RTC_TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll RTC_TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll RTC_TR HT LL_RTC_TIME_SetHour\n + * RTC_TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); +} + +/** + * @brief Get Hours in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll RTC_TR HT LL_RTC_TIME_GetHour\n + * RTC_TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_TR MNT LL_RTC_TIME_SetMinute\n + * RTC_TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); +} + +/** + * @brief Get Minutes in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll RTC_TR MNT LL_RTC_TIME_GetMinute\n + * RTC_TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU))) >> RTC_TR_MNU_Pos); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_TR ST LL_RTC_TIME_SetSecond\n + * RTC_TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); +} + +/** + * @brief Get Seconds in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll RTC_TR ST LL_RTC_TIME_GetSecond\n + * RTC_TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU))) >> RTC_TR_SU_Pos); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll RTC_TR PM LL_RTC_TIME_Config\n + * RTC_TR HT LL_RTC_TIME_Config\n + * RTC_TR HU LL_RTC_TIME_Config\n + * RTC_TR MNT LL_RTC_TIME_Config\n + * RTC_TR MNU LL_RTC_TIME_Config\n + * RTC_TR ST LL_RTC_TIME_Config\n + * RTC_TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, + uint32_t Seconds) +{ + register uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TR HT LL_RTC_TIME_Get\n + * RTC_TR HU LL_RTC_TIME_Get\n + * RTC_TR MNT LL_RTC_TIME_Get\n + * RTC_TR MNU LL_RTC_TIME_Get\n + * RTC_TR ST LL_RTC_TIME_Get\n + * RTC_TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + register uint32_t temp; + + temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU)); + return (uint32_t)((((((temp & RTC_TR_HT) >> RTC_TR_HT_Pos) << 4U) | ((temp & RTC_TR_HU) >> RTC_TR_HU_Pos)) << RTC_OFFSET_HOUR) | \ + (((((temp & RTC_TR_MNT) >> RTC_TR_MNT_Pos) << 4U) | ((temp & RTC_TR_MNU) >> RTC_TR_MNU_Pos)) << RTC_OFFSET_MINUTE) | \ + ((((temp & RTC_TR_ST) >> RTC_TR_ST_Pos) << 4U) | ((temp & RTC_TR_SU) >> RTC_TR_SU_Pos))); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR BKP LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll RTC_CR BKP LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1UL : 0UL); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +/** + * @brief Get Sub second value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll RTC_SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval Sub second value (number between 0 and 65535) + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} + +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll RTC_SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * RTC_SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll RTC_DR YT LL_RTC_DATE_SetYear\n + * RTC_DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); +} + +/** + * @brief Get Year in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll RTC_DR YT LL_RTC_DATE_GetYear\n + * RTC_DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); +} + +/** + * @brief Set Week day + * @rmtoll RTC_DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); +} + +/** + * @brief Get Week day + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll RTC_DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll RTC_DR MT LL_RTC_DATE_SetMonth\n + * RTC_DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); +} + +/** + * @brief Get Month in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_DR MT LL_RTC_DATE_GetMonth\n + * RTC_DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU))) >> RTC_DR_MU_Pos); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_DR DT LL_RTC_DATE_SetDay\n + * RTC_DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); +} + +/** + * @brief Get Day in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_DR DT LL_RTC_DATE_GetDay\n + * RTC_DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll RTC_DR WDU LL_RTC_DATE_Config\n + * RTC_DR MT LL_RTC_DATE_Config\n + * RTC_DR MU LL_RTC_DATE_Config\n + * RTC_DR DT LL_RTC_DATE_Config\n + * RTC_DR DU LL_RTC_DATE_Config\n + * RTC_DR YT LL_RTC_DATE_Config\n + * RTC_DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, + uint32_t Year) +{ + register uint32_t temp; + + temp = (WeekDay << RTC_DR_WDU_Pos) | \ + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_DR WDU LL_RTC_DATE_Get\n + * RTC_DR MT LL_RTC_DATE_Get\n + * RTC_DR MU LL_RTC_DATE_Get\n + * RTC_DR DT LL_RTC_DATE_Get\n + * RTC_DR DU LL_RTC_DATE_Get\n + * RTC_DR YT LL_RTC_DATE_Get\n + * RTC_DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) +{ + register uint32_t temp; + + temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); + return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ + (((((temp & RTC_DR_DT) >> RTC_DR_DT_Pos) << 4U) | ((temp & RTC_DR_DU) >> RTC_DR_DU_Pos)) << RTC_OFFSET_DAY) | \ + (((((temp & RTC_DR_MT) >> RTC_DR_MT_Pos) << 4U) | ((temp & RTC_DR_MU) >> RTC_DR_MU_Pos)) << RTC_OFFSET_MONTH) | \ + ((((temp & RTC_DR_YT) >> RTC_DR_YT_Pos) << 4U) | ((temp & RTC_DR_YU) >> RTC_DR_YU_Pos))); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll RTC_ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * RTC_ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll RTC_ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_SetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_ALRMAR DT LL_RTC_ALMA_GetDay\n + * RTC_ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll RTC_ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_SetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetHour\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_SetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_ALRMAR ST LL_RTC_ALMA_GetSecond\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll RTC_ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, + uint32_t Seconds) +{ + register uint32_t temp; + + temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST + | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm A Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_ALRMAR HT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR HU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNT LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR MNU LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR ST LL_RTC_ALMA_GetTime\n + * RTC_ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +/** + * @brief Set Alarm A Mask the most-significant bits starting at this bit + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm A Mask the most-significant bits starting at this bit + * @rmtoll RTC_ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A Sub seconds value + * @rmtoll RCT_ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ITSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll RTC_TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetHour\n + * RTC_TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll RTC_TSTR MNT LL_RTC_TS_GetMinute\n + * RTC_TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll RTC_TSTR ST LL_RTC_TS_GetSecond\n + * RTC_TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll RTC_TSTR HT LL_RTC_TS_GetTime\n + * RTC_TSTR HU LL_RTC_TS_GetTime\n + * RTC_TSTR MNT LL_RTC_TS_GetTime\n + * RTC_TSTR MNU LL_RTC_TS_GetTime\n + * RTC_TSTR ST LL_RTC_TS_GetTime\n + * RTC_TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll RTC_TSDR MT LL_RTC_TS_GetMonth\n + * RTC_TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll RTC_TSDR DT LL_RTC_TS_GetDay\n + * RTC_TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll RTC_TSDR WDU LL_RTC_TS_GetDate\n + * RTC_TSDR MT LL_RTC_TS_GetDate\n + * RTC_TSDR MU LL_RTC_TS_GetDate\n + * RTC_TSDR DT LL_RTC_TS_GetDate\n + * RTC_TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get time-stamp sub second value + * @rmtoll RTC_TSDR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR COE LL_RTC_CAL_SetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll RTC_CR COE LL_RTC_CAL_GetOutputFreq\n + * RTC_CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +} + +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll RTC_CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1UL : 0UL); +} + +/** + * @brief Set the calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_SetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get the calibration cycle period + * @rmtoll RTC_CALR CALW8 LL_RTC_CAL_GetPeriod\n + * RTC_CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 + * @rmtoll RTC_CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get Calibration minus + * @rmtoll RTC_CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Recalibration pending Flag + * @rmtoll RTC_ICSR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RECALPF) == (RTC_ICSR_RECALPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll RTC_SR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSOVF) == (RTC_SR_TSOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll RTC_SR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_TSF) == (RTC_SR_TSF)) ? 1UL : 0UL); +} + + +/** + * @brief Get Alarm A flag + * @rmtoll RTC_SR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->SR, RTC_SR_ALRAF) == (RTC_SR_ALRAF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll RTC_SCR CTSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSOVF); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll RTC_SCR CTSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CTSF); +} + + +/** + * @brief Clear Alarm A flag + * @rmtoll RTC_SCR CALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->SCR, RTC_SCR_CALRAF); +} + +/** + * @brief Get Initialization flag + * @rmtoll RTC_ICSR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITF) == (RTC_ICSR_INITF)) ? 1UL : 0UL); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_RSF) == (RTC_ICSR_RSF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll RTC_ICSR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ICSR, (~((RTC_ICSR_RSF | RTC_ICSR_INIT) & 0x000000FFU) | (RTCx->ICSR & RTC_ICSR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll RTC_ICSR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_INITS) == (RTC_ICSR_INITS)) ? 1UL : 0UL); +} + +/** + * @brief Get Shift operation pending flag + * @rmtoll RTC_ICSR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_SHPF) == (RTC_ICSR_SHPF)) ? 1UL : 0UL); +} + + +/** + * @brief Get Alarm A write flag + * @rmtoll RTC_ICSR ALRAWF LL_RTC_IsActiveFlag_ALRAW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ICSR, RTC_ICSR_ALRAWF) == (RTC_ICSR_ALRAWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A masked flag. + * @rmtoll RTC_MISR ALRAMF LL_RTC_IsActiveFlag_ALRAM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_ALRAMF) == (RTC_MISR_ALRAMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp masked flag. + * @rmtoll RTC_MISR TSMF LL_RTC_IsActiveFlag_TSM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSMF) == (RTC_MISR_TSMF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow masked flag. + * @rmtoll RTC_MISR TSOVMF LL_RTC_IsActiveFlag_TSOVM + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOVM(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->MISR, RTC_MISR_TSOVMF) == (RTC_MISR_TSOVMF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll RTC_CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll RTC_CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll RTC_CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_RTC_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_spi.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_spi.h new file mode 100644 index 0000000000..528c6d1a95 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_spi.h @@ -0,0 +1,2283 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_SPI_H +#define STM32C0xx_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (SPI1) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */ +#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */ +#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */ +#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */ +#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */ +#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */ +#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */ +#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */ +#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */ +#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */ +#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length + * @{ + */ +#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */ +#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold + * @{ + */ +#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equal to 1/2 (16-bit) */ +#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equal to 1/4 (8-bit) */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level + * @{ + */ +#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */ +#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */ +#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */ +#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level + * @{ + */ +#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */ +#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */ +#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */ +#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity + * @{ + */ +#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */ +#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR2 DS LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR2 DS LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS)); +} + +/** + * @brief Set threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold); +} + +/** + * @brief Get threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @brief Enable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Disable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Check if NSS pulse is enabled + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO reception Level + * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_EMPTY + * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_RX_FIFO_HALF_FULL + * @arg @ref LL_SPI_RX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL)); +} + +/** + * @brief Get FIFO Transmission Level + * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TX_FIFO_EMPTY + * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_TX_FIFO_HALF_FULL + * @arg @ref LL_SPI_TX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg_sr; + tmpreg_sr = SPIx->SR; + (void) tmpreg_sr; + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set parity of Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos); +} + +/** + * @brief Set parity of Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (*((__IO uint8_t *)&SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ +#if defined (__GNUC__) + __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR); + *spidr = TxData; +#else + *((__IO uint8_t *)&SPIx->DR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR); + *spidr = TxData; +#else + SPIx->DR = TxData; +#endif /* __GNUC__ */ +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_SPI_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_system.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_system.h new file mode 100644 index 0000000000..0b42025cb0 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_system.h @@ -0,0 +1,1175 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_SYSTEM_H +#define STM32C0xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBG) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP + * @{ + */ +#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_PIN_RMP SYSCFG PIN RMP + * @{ + */ +#define LL_SYSCFG_PIN_RMP_PA11 SYSCFG_CFGR1_PA11_RMP /*!< PA11 pad behaves as PA9 pin */ +#define LL_SYSCFG_PIN_RMP_PA12 SYSCFG_CFGR1_PA12_RMP /*!< PA12 pad behaves as PA10 pin */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_IR_MOD SYSCFG IR Modulation + * @{ + */ +#define LL_SYSCFG_IR_MOD_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< 00: Timer16 is selected as IRDA Modulation enveloppe source */ +#define LL_SYSCFG_IR_MOD_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< 01: USART1 is selected as IRDA Modulation enveloppe source */ +#define LL_SYSCFG_IR_MOD_USART2 (SYSCFG_CFGR1_IR_MOD_1) /*!< 10: USART2 is selected as IRDA Modulation enveloppe source */ + +/** + * @} + */ +/** @defgroup SYSTEM_LL_EC_IR_POL SYSCFG IR Polarity + * @{ + */ +#define LL_SYSCFG_IR_POL_NOT_INVERTED 0x00000000U /*!< 0: Output of IRDA (IROut) not inverted */ +#define LL_SYSCFG_IR_POL_INVERTED (SYSCFG_CFGR1_IR_POL) /*!< 1: Output of IRDA (IROut) inverted */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_BOOSTEN SYSCFG I/O analog switch voltage booster enable + * @{ + */ +#define LL_SYSCFG_CFGR1_BOOSTEN SYSCFG_CFGR1_BOOSTEN /*!< I/O analog switch voltage booster enable */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< I2C PB6 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< I2C PB7 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< I2C PB8 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< I2C PB9 Fast mode plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable I2C1 Fast mode Plus */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PC14 SYSCFG_CFGR1_I2C_PC14_FMP /*!< Enable Fast Mode Plus on PC14 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP (Hardfault) output of + CortexM0 with Break Input of TIM1/16/17 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBG_APB_FZ1_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBG_APB_FZ1_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBG_APB_FZ1_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBG_APB_FZ1_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBG_APB_FZ2_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ +#if defined(DBG_APB_FZ2_DBG_TIM14_STOP) +#define LL_DBGMCU_APB2_GRP1_TIM14_STOP DBG_APB_FZ2_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ +#endif /* DBG_APB_FZ2_DBG_TIM14_STOP */ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBG_APB_FZ2_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBG_APB_FZ2_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_PINMUX PINMUX Config + * @{ + */ +#if (DEV_ID == 0x443UL) +#define LL_PINMUX_SO8_PIN1_PB7 0x00000000U /*!< STM32C011 SO8 package, Pin1 assigned to GPIO PB7 */ +#define LL_PINMUX_SO8_PIN1_PC14 SYSCFG_CFGR3_PINMUX0_0 /*!< STM32C011 SO8 package, Pin1 assigned to GPIO PC14 */ +#define LL_PINMUX_SO8_PIN4_PF2 0x00000000U /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PF2 */ +#define LL_PINMUX_SO8_PIN4_PA0 SYSCFG_CFGR3_PINMUX1_0 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA0 */ +#define LL_PINMUX_SO8_PIN4_PA1 SYSCFG_CFGR3_PINMUX1_1 /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA1 */ +#define LL_PINMUX_SO8_PIN4_PA2 (SYSCFG_CFGR3_PINMUX1_0 | SYSCFG_CFGR3_PINMUX1_1) /*!< STM32C011 SO8 package, Pin4 assigned to GPIO PA2 */ +#define LL_PINMUX_SO8_PIN5_PA8 0x00000000U /*!< STM32C011 SO8 package, Pin5 assigned to GPIO PA8 */ +#define LL_PINMUX_SO8_PIN5_PA11 SYSCFG_CFGR3_PINMUX2_0 /*!< STM32C011 SO8 package, Pin5 assigned to GPIO PA11 */ +#define LL_PINMUX_SO8_PIN8_PA14 0x00000000U /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PA14 */ +#define LL_PINMUX_SO8_PIN8_PB6 SYSCFG_CFGR3_PINMUX3_0 /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PB6 */ +#define LL_PINMUX_SO8_PIN8_PC15 SYSCFG_CFGR3_PINMUX3_1 /*!< STM32C011 SO8 package, Pin8 assigned to GPIO PC15 */ +#define LL_PINMUX_WLCSP12_PINE2_PA7 0x00000000U /*!< STM32C011 WLCSP12 package, PinE2 assigned to GPIO PA7 */ +#define LL_PINMUX_WLCSP12_PINE2_PA12 SYSCFG_CFGR3_PINMUX4_0 /*!< STM32C011 WLCSP12 package, PinE2 assigned to GPIO PA12 */ +#define LL_PINMUX_WLCSP12_PINF1_PA3 0x00000000U /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA3*/ +#define LL_PINMUX_WLCSP12_PINF1_PA4 SYSCFG_CFGR3_PINMUX5_0 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA4 */ +#define LL_PINMUX_WLCSP12_PINF1_PA5 SYSCFG_CFGR3_PINMUX5_1 /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA5 */ +#define LL_PINMUX_WLCSP12_PINF1_PA6 (SYSCFG_CFGR3_PINMUX5_0 | SYSCFG_CFGR3_PINMUX5_1) /*!< STM32C011 WLCSP12 package, PinF1 assigned to GPIO PA6 */ +#elif (DEV_ID == 0x453UL) +#define LL_PINMUX_WLCSP14_PINF2_PA1 0x00000000U /*!< STM32C031 WLCSP14 package, PinF2 assigned to GPIO PA1 */ +#define LL_PINMUX_WLCSP14_PINF2_PA2 SYSCFG_CFGR3_PINMUX0_0 /*!< STM32C031 WLCSP14 package, PinF2 assigned to GPIO PA2 */ +#define LL_PINMUX_WLCSP14_PING3_PF2 0x00000000U /*!< STM32C031 WLCSP14 package, PinG3 assigned to GPIO PF2 */ +#define LL_PINMUX_WLCSP14_PING3_PA0 SYSCFG_CFGR3_PINMUX1_0 /*!< STM32C031 WLCSP14 package, PinG3 assigned to GPIO PA0 */ +#define LL_PINMUX_WLCSP14_PINJ1_PA8 0x00000000U /*!< STM32C031 WLCSP14 package, PinJ1 assigned to GPIO PA8 */ +#define LL_PINMUX_WLCSP14_PINJ1_PA11 SYSCFG_CFGR3_PINMUX2_0 /*!< STM32C031 WLCSP14 package, PinJ1 assigned to GPIO PA11 */ +#define LL_PINMUX_WLCSP14_PINH2_PA5 0x00000000U /*!< STM32C031 WLCSP14 package, PinH2 assigned to GPIO PA5 */ +#define LL_PINMUX_WLCSP14_PINH2_PA6 SYSCFG_CFGR3_PINMUX3_0 /*!< STM32C031 WLCSP14 package, PinH2 assigned to GPIO PA6 */ +#define LL_PINMUX_WLCSP14_PING1_PA7 0x00000000U /*!< STM32C031 WLCSP14 package, PinG1 assigned to GPIO PA7 */ +#define LL_PINMUX_WLCSP14_PING1_PA12 SYSCFG_CFGR3_PINMUX4_0 /*!< STM32C031 WLCSP14 package, PinG1 assigned to GPIO PA12 */ +#define LL_PINMUX_WLCSP14_PINJ3_PA3 0x00000000U /*!< STM32C031 WLCSP14 package, PinJ3 assigned to GPIO PA3 */ +#define LL_PINMUX_WLCSP14_PINJ3_PA4 SYSCFG_CFGR3_PINMUX5_0 /*!< STM32C031 WLCSP14 package, PinJ3 assigned to GPIO PA4 */ +#endif +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_EnablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_EnablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnablePinRemap(uint32_t PinRemap) +{ + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Enable remap of a pin on different pad + * @rmtoll SYSCFG_CFGR1 PA11_RMP LL_SYSCFG_DisablePinRemap\n + * SYSCFG_CFGR1 PA12_RMP LL_SYSCFG_DisablePinRemap\n + * @param PinRemap This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_PIN_RMP_PA11 + * @arg @ref LL_SYSCFG_PIN_RMP_PA12 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisablePinRemap(uint32_t PinRemap) +{ + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Set IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_SetIRModEnvelopeSignal + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART2 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRModEnvelopeSignal(uint32_t Source) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD, Source); +} + +/** + * @brief Get IR Modulation Envelope signal source. + * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_GetIRModEnvelopeSignal + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_MOD_TIM16 + * @arg @ref LL_SYSCFG_IR_MOD_USART1 + * @arg @ref LL_SYSCFG_IR_MOD_USART2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRModEnvelopeSignal(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD)); +} + +/** + * @brief Set IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_SetIRPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetIRPolarity(uint32_t Polarity) +{ + MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL, Polarity); +} + +/** + * @brief Get IR Output polarity. + * @rmtoll SYSCFG_CFGR1 IR_POL LL_SYSCFG_GetIRPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IR_POL_INVERTED + * @arg @ref LL_SYSCFG_IR_POL_NOT_INVERTED + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIRPolarity(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_POL)); +} + + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_EnableFastModePlus + * SYSCFG_CFGR1 I2C_FMP_PC14 LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PC14 + * + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_DisableFastModePlus + * SYSCFG_CFGR1 I2C_FMP_PC14 LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PC14 + * + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Set connections to TIM1/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL, Break); +} + +/** + * @brief Get connections to TIM1/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL)); +} + +/** + * @brief Config PinMux + * @rmtoll SYSCFG_CFGR3 CLL LL_SYSCFG_ConfigPinMux\n + * @param mux_cfg This parameter can be a combination of LL_PINMUX_xx defines + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_ConfigPinMux(uint32_t mux_cfg) +{ + WRITE_REG(SYSCFG->CFGR3, mux_cfg); +} + +/** + * @brief Get PinMux configuration + * @rmtoll SYSCFG_CFGR3 CLL LL_SYSCFG_GetConfigPinMux\n + * @retval Returned value can be can be a combination of LL_PINMUX_xx defines + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetConfigPinMux(void) +{ + return (uint32_t)(READ_REG(SYSCFG->CFGR3)); +} + + +#if defined(SYSCFG_ITLINE0_SR_EWDG) +/** + * @brief Check if Window watchdog interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE0 SR_EWDG LL_SYSCFG_IsActiveFlag_WWDG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_WWDG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[0], SYSCFG_ITLINE0_SR_EWDG) == (SYSCFG_ITLINE0_SR_EWDG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE0_SR_EWDG */ + +#if defined(SYSCFG_ITLINE2_SR_RTC) +/** + * @brief Check if RTC interrupt occurred or not (EXTI line 19). + * @rmtoll SYSCFG_ITLINE2 SR_RTC LL_SYSCFG_IsActiveFlag_RTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC) == (SYSCFG_ITLINE2_SR_RTC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE2_SR_RTC */ + +#if defined(SYSCFG_ITLINE3_SR_FLASH_ITF) +/** + * @brief Check if Flash interface interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ITF LL_SYSCFG_IsActiveFlag_FLASH_ITF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ITF(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ITF) == (SYSCFG_ITLINE3_SR_FLASH_ITF)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE3_SR_FLASH_ITF */ + + +#if defined(SYSCFG_ITLINE4_SR_CLK_CTRL) +/** + * @brief Check if Reset and clock control interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE4 SR_CLK_CTRL LL_SYSCFG_IsActiveFlag_CLK_CTRL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CLK_CTRL(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CLK_CTRL) == (SYSCFG_ITLINE4_SR_CLK_CTRL)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE4_SR_CLK_CTRL */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI0) +/** + * @brief Check if EXTI line 0 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI0 LL_SYSCFG_IsActiveFlag_EXTI0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI0(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI0) == (SYSCFG_ITLINE5_SR_EXTI0)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI0 */ + +#if defined(SYSCFG_ITLINE5_SR_EXTI1) +/** + * @brief Check if EXTI line 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE5 SR_EXTI1 LL_SYSCFG_IsActiveFlag_EXTI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI1) == (SYSCFG_ITLINE5_SR_EXTI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE5_SR_EXTI1 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI2) +/** + * @brief Check if EXTI line 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI2 LL_SYSCFG_IsActiveFlag_EXTI2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI2) == (SYSCFG_ITLINE6_SR_EXTI2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI2 */ + +#if defined(SYSCFG_ITLINE6_SR_EXTI3) +/** + * @brief Check if EXTI line 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE6 SR_EXTI3 LL_SYSCFG_IsActiveFlag_EXTI3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI3) == (SYSCFG_ITLINE6_SR_EXTI3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE6_SR_EXTI3 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI4) +/** + * @brief Check if EXTI line 4 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI4 LL_SYSCFG_IsActiveFlag_EXTI4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI4(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI4) == (SYSCFG_ITLINE7_SR_EXTI4)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI4 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI5) +/** + * @brief Check if EXTI line 5 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI5 LL_SYSCFG_IsActiveFlag_EXTI5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI5(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI5) == (SYSCFG_ITLINE7_SR_EXTI5)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI5 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI6) +/** + * @brief Check if EXTI line 6 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI6 LL_SYSCFG_IsActiveFlag_EXTI6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI6(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI6) == (SYSCFG_ITLINE7_SR_EXTI6)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI6 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI7) +/** + * @brief Check if EXTI line 7 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI7 LL_SYSCFG_IsActiveFlag_EXTI7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI7(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI7) == (SYSCFG_ITLINE7_SR_EXTI7)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI7 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI8) +/** + * @brief Check if EXTI line 8 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI8 LL_SYSCFG_IsActiveFlag_EXTI8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI8(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI8) == (SYSCFG_ITLINE7_SR_EXTI8)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI8 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI9) +/** + * @brief Check if EXTI line 9 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI9 LL_SYSCFG_IsActiveFlag_EXTI9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI9(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI9) == (SYSCFG_ITLINE7_SR_EXTI9)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI9 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI10) +/** + * @brief Check if EXTI line 10 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI10 LL_SYSCFG_IsActiveFlag_EXTI10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI10(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI10) == (SYSCFG_ITLINE7_SR_EXTI10)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI10 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI11) +/** + * @brief Check if EXTI line 11 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI11 LL_SYSCFG_IsActiveFlag_EXTI11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI11(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI11) == (SYSCFG_ITLINE7_SR_EXTI11)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI11 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI12) +/** + * @brief Check if EXTI line 12 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI12 LL_SYSCFG_IsActiveFlag_EXTI12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI12(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI12) == (SYSCFG_ITLINE7_SR_EXTI12)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI12 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI13) +/** + * @brief Check if EXTI line 13 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI13 LL_SYSCFG_IsActiveFlag_EXTI13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI13(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI13) == (SYSCFG_ITLINE7_SR_EXTI13)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI13 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI14) +/** + * @brief Check if EXTI line 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI14 LL_SYSCFG_IsActiveFlag_EXTI14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI14) == (SYSCFG_ITLINE7_SR_EXTI14)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI14 */ + +#if defined(SYSCFG_ITLINE7_SR_EXTI15) +/** + * @brief Check if EXTI line 15 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE7 SR_EXTI15 LL_SYSCFG_IsActiveFlag_EXTI15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI15(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI15) == (SYSCFG_ITLINE7_SR_EXTI15)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE7_SR_EXTI15 */ + + +#if defined(SYSCFG_ITLINE9_SR_DMA1_CH1) +/** + * @brief Check if DMA1 channel 1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE9 SR_DMA1_CH1 LL_SYSCFG_IsActiveFlag_DMA1_CH1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[9], SYSCFG_ITLINE9_SR_DMA1_CH1) == (SYSCFG_ITLINE9_SR_DMA1_CH1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE9_SR_DMA1_CH1 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH2) +/** + * @brief Check if DMA1 channel 2 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH2 LL_SYSCFG_IsActiveFlag_DMA1_CH2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH2) == (SYSCFG_ITLINE10_SR_DMA1_CH2)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH2 */ + +#if defined(SYSCFG_ITLINE10_SR_DMA1_CH3) +/** + * @brief Check if DMA1 channel 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH3 LL_SYSCFG_IsActiveFlag_DMA1_CH3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH3) == (SYSCFG_ITLINE10_SR_DMA1_CH3)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE10_SR_DMA1_CH3 */ + + +#if defined(SYSCFG_ITLINE11_SR_DMAMUX1) +/** + * @brief Check if DMAMUX interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE11 SR_DMAMUX1 LL_SYSCFG_IsActiveFlag_DMAMUX + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMAMUX(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMAMUX1) == (SYSCFG_ITLINE11_SR_DMAMUX1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE11_SR_DMAMUX */ + +#if defined(SYSCFG_ITLINE12_SR_ADC) +/** + * @brief Check if ADC interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE12 SR_ADC LL_SYSCFG_IsActiveFlag_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_ADC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_ADC) == (SYSCFG_ITLINE12_SR_ADC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE12_SR_ADC */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_BRK) +/** + * @brief Check if Timer 1 break interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_BRK LL_SYSCFG_IsActiveFlag_TIM1_BRK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_BRK(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_BRK) == (SYSCFG_ITLINE13_SR_TIM1_BRK)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_BRK */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_UPD) +/** + * @brief Check if Timer 1 update interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_UPD LL_SYSCFG_IsActiveFlag_TIM1_UPD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_UPD(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_UPD) == (SYSCFG_ITLINE13_SR_TIM1_UPD)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_UPD */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_TRG) +/** + * @brief Check if Timer 1 trigger interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_TRG LL_SYSCFG_IsActiveFlag_TIM1_TRG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_TRG(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_TRG) == (SYSCFG_ITLINE13_SR_TIM1_TRG)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_TRG */ + +#if defined(SYSCFG_ITLINE13_SR_TIM1_CCU) +/** + * @brief Check if Timer 1 commutation interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE13 SR_TIM1_CCU LL_SYSCFG_IsActiveFlag_TIM1_CCU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CCU(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_CCU) == (SYSCFG_ITLINE13_SR_TIM1_CCU)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE13_SR_TIM1_CCU */ + +#if defined(SYSCFG_ITLINE14_SR_TIM1_CC) +/** + * @brief Check if Timer 1 capture compare interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE14 SR_TIM1_CC LL_SYSCFG_IsActiveFlag_TIM1_CC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CC(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[14], SYSCFG_ITLINE14_SR_TIM1_CC) == (SYSCFG_ITLINE14_SR_TIM1_CC)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE14_SR_TIM1_CC */ + + +#if defined(SYSCFG_ITLINE16_SR_TIM3_GLB) +/** + * @brief Check if Timer 3 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE16 SR_TIM3_GLB LL_SYSCFG_IsActiveFlag_TIM3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM3(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM3_GLB) == (SYSCFG_ITLINE16_SR_TIM3_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE16_SR_TIM3_GLB */ + +#if defined(SYSCFG_ITLINE19_SR_TIM14_GLB) +/** + * @brief Check if Timer 14 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE19 SR_TIM14_GLB LL_SYSCFG_IsActiveFlag_TIM14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM14(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[19], SYSCFG_ITLINE19_SR_TIM14_GLB) == (SYSCFG_ITLINE19_SR_TIM14_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE19_SR_TIM14_GLB */ + +#if defined(SYSCFG_ITLINE21_SR_TIM16_GLB) +/** + * @brief Check if Timer 16 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE21 SR_TIM16_GLB LL_SYSCFG_IsActiveFlag_TIM16 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM16(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_TIM16_GLB) == (SYSCFG_ITLINE21_SR_TIM16_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE21_SR_TIM16_GLB */ + +#if defined(SYSCFG_ITLINE22_SR_TIM17_GLB) +/** + * @brief Check if Timer 17 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE22 SR_TIM17_GLB LL_SYSCFG_IsActiveFlag_TIM17 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM17(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_TIM17_GLB) == (SYSCFG_ITLINE22_SR_TIM17_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE22_SR_TIM17_GLB */ + +#if defined(SYSCFG_ITLINE23_SR_I2C1_GLB) +/** + * @brief Check if I2C1 interrupt occurred or not, combined with EXTI line 23. + * @rmtoll SYSCFG_ITLINE23 SR_I2C1_GLB LL_SYSCFG_IsActiveFlag_I2C1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[23], SYSCFG_ITLINE23_SR_I2C1_GLB) == (SYSCFG_ITLINE23_SR_I2C1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE23_SR_I2C1_GLB */ + +#if defined(SYSCFG_ITLINE25_SR_SPI1) +/** + * @brief Check if SPI1 interrupt occurred or not. + * @rmtoll SYSCFG_ITLINE25 SR_SPI1 LL_SYSCFG_IsActiveFlag_SPI1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[25], SYSCFG_ITLINE25_SR_SPI1) == (SYSCFG_ITLINE25_SR_SPI1)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE25_SR_SPI1 */ + + +#if defined(SYSCFG_ITLINE27_SR_USART1_GLB) +/** + * @brief Check if USART1 interrupt occurred or not, combined with EXTI line 25. + * @rmtoll SYSCFG_ITLINE27 SR_USART1_GLB LL_SYSCFG_IsActiveFlag_USART1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART1(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[27], SYSCFG_ITLINE27_SR_USART1_GLB) == (SYSCFG_ITLINE27_SR_USART1_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE27_SR_USART1_GLB */ + +#if defined(SYSCFG_ITLINE28_SR_USART2_GLB) +/** + * @brief Check if USART2 interrupt occurred or not, combined with EXTI line 26. + * @rmtoll SYSCFG_ITLINE28 SR_USART2_GLB LL_SYSCFG_IsActiveFlag_USART2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART2(void) +{ + return ((READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_USART2_GLB) == (SYSCFG_ITLINE28_SR_USART2_GLB)) ? 1UL : 0UL); +} +#endif /* SYSCFG_ITLINE28_SR_USART2_GLB */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @rmtoll DBG_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBG_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBG->IDCODE, DBG_IDCODE_REV_ID) >> DBG_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBG_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBG_APB_FZ1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * DBG_APB_FZ1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ1, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBG->APBFZ2, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBG_APB_FZ2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM14_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n + * DBG_APB_FZ2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBG->APBFZ2, Periphs); +} +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR FLASH_ACR_PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return ((READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_EnableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Disable Instruction cache + * @rmtoll FLASH_ACR FLASH_ACR_ICEN LL_FLASH_DisableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Enable Instruction cache reset + * @note bit can be written only when the instruction cache is disabled + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_EnableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Disable Instruction cache reset + * @rmtoll FLASH_ACR FLASH_ACR_ICRST LL_FLASH_DisableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBG) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_SYSTEM_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_tim.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_tim.h new file mode 100644 index 0000000000..f17ec7124a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_tim.h @@ -0,0 +1,4996 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32C0xx_LL_TIM_H +#define __STM32C0xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM3) || defined (TIM14) || defined (TIM16) || defined (TIM17) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U, /* 6: TIMx_CH4 */ + 0x3CU, /* 7: TIMx_CH5 */ + 0x3CU /* 8: TIMx_CH6 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U, /* 6: OC4M, OC4FE, OC4PE */ + 0U, /* 7: OC5M, OC5FE, OC5PE */ + 8U /* 8: OC6M, OC6FE, OC6PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U, /* 6: CC4S, IC4PSC, IC4F */ + 0U, /* 7: - NA */ + 0U /* 8: - NA */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U, /* 6: CC4P */ + 16U, /* 7: CC5P */ + 20U /* 8: CC6P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U, /* 6: OIS4 */ + 8U, /* 7: OIS5 */ + 10U /* 8: OIS6 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets */ +#define TIM_POSITION_BRK_SOURCE ((Source >> 1U) & 0x1FUL) + +/* Generic bit definitions for TIMx_AF1 register */ +#define TIMx_AF1_BKINP TIM1_AF1_BKINP /*!< BRK BKIN input polarity */ +#define TIMx_AF1_ETRSEL TIM1_AF1_ETRSEL /*!< TIMx ETR source selection */ + + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +/** +@endcond + */ + +#define OCREF_CLEAR_SELECT_POS (16U) +#define OCREF_CLEAR_SELECT_Msk (0x1U << OCREF_CLEAR_SELECT_POS) /*!< 0x00010000 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH4) ? 6U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH5) ? 7U : 8U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakFilter; /*!< Specifies the TIM Break Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_ConfigBRK() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK2() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input. + This parameter can be a value of @ref TIM_LL_EC_BREAK2_AFMODE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_ConfigBRK2() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_CC5IF TIM_SR_CC5IF /*!< Capture/compare 5 interrupt flag */ +#define LL_TIM_SR_CC6IF TIM_SR_CC6IF /*!< Capture/compare 6 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_B2IF TIM_SR_B2IF /*!< Second break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +#define LL_TIM_SR_SBIF TIM_SR_SBIF /*!< System Break interrupt flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_BREAK2_ENABLE Break2 Enable + * @{ + */ +#define LL_TIM_BREAK2_DISABLE 0x00000000U /*!< Break2 function disabled */ +#define LL_TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break2 function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros + * @{ + */ + +/** + * @brief HELPER macro retrieving the UIFCPY flag from the counter value. + * @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ()); + * @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied + * to TIMx_CNT register bit 31) + * @param __CNT__ Counter value + * @retval UIF status bit + */ +#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \ + (READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos) + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note For advanced timer instances RepetitionCounter can be up to 65535. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) copy is set. + * @param Counter Counter value + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(uint32_t Counter) +{ + return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel\n + * CCER CC5E LL_TIM_CC_EnableChannel\n + * CCER CC6E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel\n + * CCER CC5E LL_TIM_CC_DisableChannel\n + * CCER CC6E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel\n + * CCER CC5E LL_TIM_CC_IsEnabledChannel\n + * CCER CC6E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC5S LL_TIM_OC_ConfigOutput\n + * CCMR3 CC6S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CCER CC5P LL_TIM_OC_ConfigOutput\n + * CCER CC6P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput\n + * CR2 OIS5 LL_TIM_OC_ConfigOutput\n + * CR2 OIS6 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode\n + * CCMR3 OC5M LL_TIM_OC_SetMode\n + * CCMR3 OC6M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode\n + * CCMR3 OC5M LL_TIM_OC_GetMode\n + * CCMR3 OC6M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASSYMETRIC_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity\n + * CCER CC5P LL_TIM_OC_SetPolarity\n + * CCER CC6P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity\n + * CCER CC5P LL_TIM_OC_GetPolarity\n + * CCER CC6P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState\n + * CR2 OIS5 LL_TIM_OC_SetIdleState\n + * CR2 OIS6 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState\n + * CR2 OIS5 LL_TIM_OC_GetIdleState\n + * CR2 OIS6 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast\n + * CCMR3 OC5FE LL_TIM_OC_EnableFast\n + * CCMR3 OC6FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast\n + * CCMR3 OC5FE LL_TIM_OC_DisableFast\n + * CCMR3 OC6FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC5FE LL_TIM_OC_IsEnabledFast\n + * CCMR3 OC6FE LL_TIM_OC_IsEnabledFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC5PE LL_TIM_OC_EnablePreload\n + * CCMR3 OC6PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC5PE LL_TIM_OC_DisablePreload\n + * CCMR3 OC6PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload\n + * CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear\n + * CCMR3 OC5CE LL_TIM_OC_EnableClear\n + * CCMR3 OC6CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear\n + * CCMR3 OC5CE LL_TIM_OC_DisableClear\n + * CCMR3 OC6CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC5CE LL_TIM_OC_IsEnabledClear\n + * CCMR3 OC6CE LL_TIM_OC_IsEnabledClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Set compare value for output channel 5 (TIMx_CCR5). + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + MODIFY_REG(TIMx->CCR5, TIM_CCR5_CCR5, CompareValue); +} + +/** + * @brief Set compare value for output channel 6 (TIMx_CCR6). + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR6, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @brief Get compare value (TIMx_CCR5) set for output channel 5. + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * output channel 5 is supported by a timer instance. + * @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CCR5, TIM_CCR5_CCR5)); +} + +/** + * @brief Get compare value (TIMx_CCR6) set for output channel 6. + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * output channel 6 is supported by a timer instance. + * @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR6)); +} + +/** + * @brief Select on which reference signal the OC5REF is combined to. + * @note Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the combined 3-phase PWM mode. + * @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n + * CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels + * @param TIMx Timer instance + * @param GroupCH5 This parameter can be a combination of the following values: + * @arg @ref LL_TIM_GROUPCH5_NONE + * @arg @ref LL_TIM_GROUPCH5_OC1REFC + * @arg @ref LL_TIM_GROUPCH5_OC2REFC + * @arg @ref LL_TIM_GROUPCH5_OC3REFC + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t GroupCH5) +{ + MODIFY_REG(TIMx->CCR5, (TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1), GroupCH5); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the trigger output 2 (TRGO2) used for ADC synchronization . + * @note Macro IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can be used for ADC synchronization. + * @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2 + * @param TIMx Timer Instance + * @param ADCSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO2_RESET + * @arg @ref LL_TIM_TRGO2_ENABLE + * @arg @ref LL_TIM_TRGO2_UPDATE + * @arg @ref LL_TIM_TRGO2_CC1F + * @arg @ref LL_TIM_TRGO2_OC1 + * @arg @ref LL_TIM_TRGO2_OC2 + * @arg @ref LL_TIM_TRGO2_OC3 + * @arg @ref LL_TIM_TRGO2_OC4 + * @arg @ref LL_TIM_TRGO2_OC5 + * @arg @ref LL_TIM_TRGO2_OC6 + * @arg @ref LL_TIM_TRGO2_OC4_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC6_RISINGFALLING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_FALLING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_RISING + * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_FALLING + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS2, ADCSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @brief Select the external trigger (ETR) input source. + * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports ETR source selection. + * @rmtoll AF1 ETRSEL LL_TIM_SetETRSource + * @param TIMx Timer instance + * @param ETRSource This parameter can be one of the following values: + * @arg @ref LL_TIM_ETRSOURCE_GPIO + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD1 + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD2 + * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) +{ + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BKBID bit set), the Break input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, BreakAFMode must be set to + * LL_TIM_BREAK_AFMODE_INPUT. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n + * BDTR BKF LL_TIM_ConfigBRK\n + * BDTR BKBID LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @param BreakFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N8 + * @param BreakAFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, uint32_t BreakFilter, + uint32_t BreakAFMode) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKF | TIM_BDTR_BKBID, BreakPolarity | BreakFilter | BreakAFMode); +} + +/** + * @brief Disarm the break input (when it operates in bidirectional mode). + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @rmtoll BDTR BKDSRM LL_TIM_DisarmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Re-arm the break input (when it operates in bidirectional mode). + * @note The Break input is automatically armed as soon as MOE bit is set. + * @rmtoll BDTR BKDSRM LL_TIM_ReArmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ReArmBRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Enable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_EnableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2E); +} + +/** + * @brief Disable the break 2 function. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @rmtoll BDTR BK2E LL_TIM_DisableBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2E); +} + +/** + * @brief Configure the break 2 input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @note Bidirectional mode is only supported by advanced timer instances. + * Macro IS_TIM_ADVANCED_INSTANCE(TIMx) can be used to check whether or not + * a timer instance is an advanced-control timer. + * @note In bidirectional mode (BK2BID bit set), the Break 2 input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break 2 input to indicate an internal break + * event to external devices. + * @note When bidirectional mode isn't supported, Break2AFMode must be set to + * LL_TIM_BREAK2_AFMODE_INPUT. + * @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n + * BDTR BK2F LL_TIM_ConfigBRK2\n + * BDTR BK2BID LL_TIM_ConfigBRK2 + * @param TIMx Timer instance + * @param Break2Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_POLARITY_LOW + * @arg @ref LL_TIM_BREAK2_POLARITY_HIGH + * @param Break2Filter This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N8 + * @param Break2AFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK2_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarity, uint32_t Break2Filter, + uint32_t Break2AFMode) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BK2P | TIM_BDTR_BK2F | TIM_BDTR_BK2BID, Break2Polarity | Break2Filter | Break2AFMode); +} + +/** + * @brief Disarm the break 2 input (when it operates in bidirectional mode). + * @note The break 2 input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output. + * @rmtoll BDTR BK2DSRM LL_TIM_DisarmBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BK2DSRM); +} + +/** + * @brief Re-arm the break 2 input (when it operates in bidirectional mode). + * @note The Break 2 input is automatically armed as soon as MOE bit is set. + * @rmtoll BDTR BK2DSRM LL_TIM_ReArmBRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ReArmBRK2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2DSRM); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP2E LL_TIM_EnableBreakInputSource\n + * AF1 BKDF1BK0E LL_TIM_EnableBreakInputSource\n + * AF2 BK2INE LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_EnableBreakInputSource\n + * AF2 BK2DF1BK1E LL_TIM_EnableBreakInputSource + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + SET_BIT(*pReg, Source); +} + +/** + * @brief Disable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_DisableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_DisableBreakInputSource\n + * AF1 BKCMP2E LL_TIM_DisableBreakInputSource\n + * AF1 BKDF1BK0E LL_TIM_DisableBreakInputSource\n + * AF2 BK2INE LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_DisableBreakInputSource\n + * AF2 BK2DF1BK1E LL_TIM_DisableBreakInputSource + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + CLEAR_BIT(*pReg, Source); +} + +/** + * @brief Set the polarity of the break signal for the timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINP LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP1P LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP2P LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2INP LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2CMP1P LL_TIM_SetBreakInputSourcePolarity\n + * AF2 BK2CMP2P LL_TIM_SetBreakInputSourcePolarity + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_POLARITY_LOW + * @arg @ref LL_TIM_BKIN_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, + uint32_t Polarity) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + MODIFY_REG(*pReg, (TIMx_AF1_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE)); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @arg @ref LL_TIM_DMABURST_BASEADDR_OR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR5 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR6 + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_TISEL + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->TISEL, (TIM_TISEL_TI1SEL | TIM_TISEL_TI2SEL | TIM_TISEL_TI3SEL | TIM_TISEL_TI4SEL), Remap); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management + * @{ + */ +/** + * @brief Set the OCREF clear input source + * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT + * @note This function can only be used in Output compare and PWM modes. + * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource + * @rmtoll OR1 OCREF_CLR LL_TIM_SetOCRefClearInputSource + * @param TIMx Timer instance + * @param OCRefClearInputSource This parameter can be one of the following values: + * @arg @ref LL_TIM_OCREF_CLR_INT_ETR + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, + ((OCRefClearInputSource & OCREF_CLEAR_SELECT_Msk) >> OCREF_CLEAR_SELECT_POS) << TIM_SMCR_OCCS_Pos); + MODIFY_REG(TIMx->OR1, TIM1_OR1_OCREF_CLR, OCRefClearInputSource); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 5 interrupt flag (CC5F). + * @rmtoll SR CC5IF LL_TIM_ClearFlag_CC5 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC5(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC5IF)); +} + +/** + * @brief Indicate whether Capture/Compare 5 interrupt flag (CC5F) is set (Capture/Compare 5 interrupt is pending). + * @rmtoll SR CC5IF LL_TIM_IsActiveFlag_CC5 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC5(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC5IF) == (TIM_SR_CC5IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 6 interrupt flag (CC6F). + * @rmtoll SR CC6IF LL_TIM_ClearFlag_CC6 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC6(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC6IF)); +} + +/** + * @brief Indicate whether Capture/Compare 6 interrupt flag (CC6F) is set (Capture/Compare 6 interrupt is pending). + * @rmtoll SR CC6IF LL_TIM_IsActiveFlag_CC6 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC6(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC6IF) == (TIM_SR_CC6IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break 2 interrupt flag (B2IF). + * @rmtoll SR B2IF LL_TIM_ClearFlag_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_B2IF)); +} + +/** + * @brief Indicate whether break 2 interrupt flag (B2IF) is set (break 2 interrupt is pending). + * @rmtoll SR B2IF LL_TIM_IsActiveFlag_BRK2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_B2IF) == (TIM_SR_B2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the system break interrupt flag (SBIF). + * @rmtoll SR SBIF LL_TIM_ClearFlag_SYSBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_SYSBRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_SBIF)); +} + +/** + * @brief Indicate whether system break interrupt flag (SBIF) is set (system break interrupt is pending). + * @rmtoll SR SBIF LL_TIM_IsActiveFlag_SYSBRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_SYSBRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_SBIF) == (TIM_SR_SBIF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @brief Generate break 2 event. + * @rmtoll EGR B2G LL_TIM_GenerateEvent_BRK2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_B2G); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32C0xx_LL_TIM_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_usart.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_usart.h new file mode 100644 index 0000000000..b0048f1092 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_usart.h @@ -0,0 +1,4400 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_USART_H +#define STM32C0xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +/* Legacy define */ +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +/* Legacy define */ +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +/* Legacy define */ +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_USART_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_utils.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_utils.h new file mode 100644 index 0000000000..39d956ef9f --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_utils.h @@ -0,0 +1,265 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + + @endverbatim + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_UTILS_H +#define STM32C0xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#define LL_UTILS_PACKAGETYPE_QFN28_GP 0x00000000U /*!< UFQFPN28 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN28_PD 0x00000001U /*!< UFQFPN28 Power Delivery (PD) */ +#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000004U /*!< UFQFPN32 / LQFP32 general purpose (GP) package type */ +#define LL_UTILS_PACKAGETYPE_QFN32_PD 0x00000005U /*!< UFQFPN32 / LQFP32 Power Delivery (PD) package type */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x00000008U /*!< UFQFPN48 / LQFP488 package type */ +#define LL_UTILS_PACKAGETYPE_QFP48 0x0000000CU /*!< LQPF48 package type */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN28_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32_PD + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @arg @ref LL_UTILS_PACKAGETYPE_QFP48 + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0xFU); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_UTILS_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_wwdg.h b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_wwdg.h new file mode 100644 index 0000000000..079bdbfebc --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_ll_wwdg.h @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_wwdg.h + * @author MCD Application Team + * @brief Header file of WWDG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_LL_WWDG_H +#define STM32C0xx_LL_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (WWDG) + +/** @defgroup WWDG_LL WWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants + * @{ + */ + +/** @defgroup WWDG_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions + * @{ + */ +#define LL_WWDG_CFR_EWI WWDG_CFR_EWI +/** + * @} + */ + +/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER + * @{ + */ +#define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ +#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ +#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ +#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */ +#define LL_WWDG_PRESCALER_16 WWDG_CFR_WDGTB_2 /*!< WWDG counter clock = (PCLK1/4096)/16 */ +#define LL_WWDG_PRESCALER_32 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/32 */ +#define LL_WWDG_PRESCALER_64 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/64 */ +#define LL_WWDG_PRESCALER_128 (WWDG_CFR_WDGTB_2 | WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/128 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros + * @{ + */ +/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in WWDG register + * @param __INSTANCE__ WWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable Window Watchdog. The watchdog is always disabled after a reset. + * @note It is enabled by setting the WDGA bit in the WWDG_CR register, + * then it cannot be disabled again except by a reset. + * This bit is set by software and only cleared by hardware after a reset. + * When WDGA = 1, the watchdog can generate a reset. + * @rmtoll CR WDGA LL_WWDG_Enable + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CR, WWDG_CR_WDGA); +} + +/** + * @brief Checks if Window Watchdog is enabled + * @rmtoll CR WDGA LL_WWDG_IsEnabled + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL); +} + +/** + * @brief Set the Watchdog counter value to provided value (7-bits T[6:0]) + * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset + * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles + * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared) + * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled) + * @rmtoll CR T LL_WWDG_SetCounter + * @param WWDGx WWDG Instance + * @param Counter 0..0x7F (7 bit counter value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter) +{ + MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter); +} + +/** + * @brief Return current Watchdog Counter Value (7 bits counter value) + * @rmtoll CR T LL_WWDG_GetCounter + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Counter value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CR, WWDG_CR_T)); +} + +/** + * @brief Set the time base of the prescaler (WDGTB). + * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter + * is decremented every (4096 x 2expWDGTB) PCLK cycles + * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler + * @param WWDGx WWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler); +} + +/** + * @brief Return current Watchdog Prescaler Value + * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler + * @param WWDGx WWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_WWDG_PRESCALER_1 + * @arg @ref LL_WWDG_PRESCALER_2 + * @arg @ref LL_WWDG_PRESCALER_4 + * @arg @ref LL_WWDG_PRESCALER_8 + * @arg @ref LL_WWDG_PRESCALER_16 + * @arg @ref LL_WWDG_PRESCALER_32 + * @arg @ref LL_WWDG_PRESCALER_64 + * @arg @ref LL_WWDG_PRESCALER_128 + */ +__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB)); +} + +/** + * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]). + * @note This window value defines when write in the WWDG_CR register + * to program Watchdog counter is allowed. + * Watchdog counter value update must occur only when the counter value + * is lower than the Watchdog window register value. + * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value + * (in the control register) is refreshed before the downcounter has reached + * the watchdog window register value. + * Physically is possible to set the Window lower then 0x40 but it is not recommended. + * To generate an immediate reset, it is possible to set the Counter lower than 0x40. + * @rmtoll CFR W LL_WWDG_SetWindow + * @param WWDGx WWDG Instance + * @param Window 0x00..0x7F (7 bit Window value) + * @retval None + */ +__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window) +{ + MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window); +} + +/** + * @brief Return current Watchdog Window Value (7 bits value) + * @rmtoll CFR W LL_WWDG_GetWindow + * @param WWDGx WWDG Instance + * @retval 7 bit Watchdog Window value + */ +__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx) +{ + return (READ_BIT(WWDGx->CFR, WWDG_CFR_W)); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ +/** + * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not. + * @note This bit is set by hardware when the counter has reached the value 0x40. + * It must be cleared by software by writing 0. + * A write of 1 has no effect. This bit is also set if the interrupt is not enabled. + * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF) + * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx) +{ + WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF); +} + +/** + * @} + */ + +/** @defgroup WWDG_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable the Early Wakeup Interrupt. + * @note When set, an interrupt occurs whenever the counter reaches value 0x40. + * This interrupt is only cleared by hardware after a reset + * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP + * @param WWDGx WWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + SET_BIT(WWDGx->CFR, WWDG_CFR_EWI); +} + +/** + * @brief Check if Early Wakeup Interrupt is enabled + * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP + * @param WWDGx WWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx) +{ + return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* WWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_LL_WWDG_H */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.md b/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.md new file mode 100644 index 0000000000..4a464d09d0 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.md @@ -0,0 +1,27 @@ +Copyright 2022 STMicroelectronics. +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.txt b/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.txt new file mode 100644 index 0000000000..1cbbc544a3 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/system/Drivers/STM32C0xx_HAL_Driver/README.md b/system/Drivers/STM32C0xx_HAL_Driver/README.md new file mode 100644 index 0000000000..6223decd3e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/README.md @@ -0,0 +1,39 @@ +# STM32CubeC0 HAL Driver MCU Component + +## Overview + +**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost. + +**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series. + * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product + * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio + * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series + * A consistent set of middlewares components such as RTOS, FatFS, TCP-IP, Graphic ... + * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series + +Two models of publication are proposed for the STM32Cube embedded software: + * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series) + * The **MCU component** : each STM32Cube software module being part of the STM32Cube MCU Package, are delivered as an individual repo, allowing the user to select and get only the required software functions. + +## Description + +This **stm32c0xx_hal_driver** MCU component repo is one element of the STM32CubeC0 MCU embedded software package, providing the **HAL-LL Drivers** part. + + +## Compatibility information + +In this table, you can find the successive versions of this HAL-LL Driver component, in line with the corresponding versions of the full MCU package: + +It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device - HAL, as mentioned in this table. + +HAL Driver | CMSIS Device | CMSIS Core | Was delivered in the full MCU package +------------- | --------------- | ---------- | ------------------------------------- +Tag v1.0.0 | Tag v1.0.0 | Tag v560_cm0 | Tag v1.0.0 (and following, if any, till next tag) + + + +## Troubleshooting + +If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/stm32u5xx_hal_driver/issues/new/choose). + +For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus). \ No newline at end of file diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Release_Notes.html b/system/Drivers/STM32C0xx_HAL_Driver/Release_Notes.html new file mode 100644 index 0000000000..8f73e6338d --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Release_Notes.html @@ -0,0 +1,111 @@ + + + + + + + Release Notes for STM32CubeC0 HAL and LL drivers + + + + + + +
+
+
+

Release Notes +for STM32CubeC0 HAL and LL drivers

+

Copyright ©  2022 STMicroelectronics
+

+ +
+

Purpose

+

The STM32Cube HAL and LL, an STM32 abstraction layer embedded +software, ensure maximized portability across STM32 portfolio.

+

The portable APIs layer provides a generic, multi instanced and +simple set of APIs to interact with the upper layer (application, +libraries and stacks). It is composed of native and extended APIs set. +It is directly built around a generic architecture and allows the +build-upon layers, like the middleware layer, to implement its functions +without knowing in-depth the used STM32 device. This improves the +library code reusability and guarantees an easy portability on other +devices and STM32 families.

+

The Low Layer (LL) drivers are part of the STM32Cube firmware HAL +that provides a basic set of optimized and one-shot services. The Low +layer drivers, contrary to the HAL ones are not fully portable across +the STM32 families; the availability of some functions depends on the +physical availability of the relative features on the product. The Low +Layer (LL) drivers are designed to offer the following features:

+
    +
  • New set of inline functions for direct and atomic register +access
    • +
  • One-shot operations that can be used by the HAL drivers or from +application level
    • +
  • Full independence from HAL and standalone usage (without HAL +drivers)
    • +
  • Full features coverage of all the supported peripherals
    • +
+
+
+

Update History

+
+ + +
+

Main Changes

+
    +

  • Patch Release of STM32CubeC0 Firmware Package

    • +

  • Update ADC HAL driver with proper internal sensor calibration implementation:

    +
      +
    • Helper macro “__LL_ADC_CALC_TEMPERATURE()” is not available and +macro “__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS()” must be used.
      • +
    • +

  • Update RCC LL driver by adding missing AHB Prescaler.

    • +
+

Known Limitations

+

N/A

+
+
+
+ + +
+

Main Changes

+

First official release of HAL and LL drivers for STM32C031xx / +STM32C011xx devices

+

Known Limitations

+

N/A

+
+
+
+
+
+

For complete documentation on STM32 Microcontrollers , visit: +www.st.com/stm32

+This release note uses up to date web standards and, for this reason, +should not be opened with Internet Explorer but preferably with popular +browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft +Edge. +
+ + diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c new file mode 100644 index 0000000000..f8bf366e23 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c @@ -0,0 +1,633 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief STM32C0xx HAL Driver version number + */ +#define __STM32C0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32C0xx_HAL_VERSION_SUB1 (0x00U) /*!< [23:16] sub1 version */ +#define __STM32C0xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ +#define __STM32C0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32C0xx_HAL_VERSION ((__STM32C0xx_HAL_VERSION_MAIN << 24U)\ + |(__STM32C0xx_HAL_VERSION_SUB1 << 16U)\ + |(__STM32C0xx_HAL_VERSION_SUB2 << 8U )\ + |(__STM32C0xx_HAL_VERSION_RC)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +uint32_t uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @brief HAL Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### HAL Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch and the Instruction cache, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32c0xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on HSI clock, as HSI is the clock + * used after a system Reset. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + +#if (INSTRUCTION_CACHE_ENABLE == 0U) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0U) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); + + __HAL_RCC_IOP_FORCE_RESET(); + __HAL_RCC_IOP_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval status + */ +HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + + if (status == HAL_OK) + { + uwTickFreq = Freq; + } + } + + return status; +} + +/** + * @brief return tick frequency. + * @retval tick period in Hz + */ +uint32_t HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32C0xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return ((DBG->IDCODE & DBG_IDCODE_REV_ID) >> 16U); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return ((DBG->IDCODE) & DBG_IDCODE_DEV_ID); +} + +/** + * @brief Returns first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Returns second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Returns third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBG->CR, DBG_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @brief SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Pin remap + (+) Enable/Disable the I/O analog switch voltage booster +@endverbatim + * @{ + */ + + +/** + * @brief Enable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Enable the remap on PA11_PA12 + * @param PinRemap specifies which pins have to be remapped + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_EnableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + SET_BIT(SYSCFG->CFGR1, PinRemap); +} + +/** + * @brief Disable the remap on PA11_PA12 + * @param PinRemap specifies which pins will behave normally + * This parameter can be any combination of the following values: + * @arg @ref SYSCFG_REMAP_PA11 + * @arg @ref SYSCFG_REMAP_PA12 + * @retval None + */ +void HAL_SYSCFG_DisableRemap(uint32_t PinRemap) +{ + /* Check the parameter */ + assert_param(IS_HAL_REMAP_PIN(PinRemap)); + CLEAR_BIT(SYSCFG->CFGR1, PinRemap); +} +/** + * @brief Set Pin Binding + * @param pin_binding specifies which pin will bind a specific GPIO + * for each die package + * This parameter can be any combination of HAL_BIND_xx defines + * @retval None + */ +void HAL_SYSCFG_SetPinBinding(uint32_t pin_binding) +{ + /* Check the parameter */ + assert_param(IS_HAL_SYSCFG_PINBINDING(pin_binding)); + LL_SYSCFG_ConfigPinMux(pin_binding); +} + +/** + * @brief return Pin Binding configuration + * @retval PinMux configuration + */ +uint32_t HAL_SYSCFG_GetPinBinding(void) +{ + return LL_SYSCFG_GetConfigPinMux(); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc.c new file mode 100644 index 0000000000..83dd09f17a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc.c @@ -0,0 +1,3004 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_adc.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * ++ Initialization and Configuration of ADC + * + Operation functions + * ++ Start, stop, get result of conversions of regular + * group, using 3 possible modes: polling, interruption or DMA. + * + Control functions + * ++ Channels configuration on regular group + * ++ Analog Watchdog configuration + * + State functions + * ++ ADC state machine management + * ++ Interrupts and flags management + * Other functions (extended functions) are available in file + * "stm32c0xx_hal_adc_ex.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution. + + (+) Interrupt generation at the end of regular conversion and in case of + analog watchdog or overrun events. + + (+) Single and continuous conversion modes. + + (+) Scan mode for conversion of several channels sequentially. + + (+) Data alignment with in-built data coherency. + + (+) Programmable sampling time (common to group of channels) + + (+) External trigger (timer or EXTI) with configurable polarity + + (+) DMA request generation for transfer of conversions data of regular group. + + (+) ADC calibration + + (+) ADC conversion of regular group. + + (+) ADC supply requirements: 1.62 V to 3.6 V. + + (+) ADC input range: from Vref- (connected to Vssa) to Vref+ (connected to + Vdda or to an external voltage reference). + + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + Caution: On STM32C0, ADC clock frequency max is 35MHz (refer + to device datasheet). + Therefore, ADC clock source from RCC and ADC clock + prescaler must be configured to remain below + this maximum frequency. + + (++) Two clock settings are mandatory: + (+++) ADC clock (core clock, also possibly conversion clock). + + (+++) ADC clock (conversions clock). + Four possible clock sources: synchronous clock from APB clock (same as ADC core clock) + or asynchronous clock from RCC level: SYSCLK, HSI48. + + (+++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory: core clock) + + (++) ADC clock source and clock prescaler are configured at ADC level with + parameter "ClockPrescaler" using function HAL_ADC_Init(). + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADCx_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, group regular, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters (resolution, data alignment, ...) + and regular group parameters (conversion trigger, sequencer, ...) + using function HAL_ADC_Init(). + + (#) Configure the channels for regular group parameters (channel number, + channel rank into sequencer, ..., into regular group) + using function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AnalogWDGConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) Optionally, perform an automatic ADC calibration to improve the + conversion accuracy + using function HAL_ADCEx_Calibration_Start(). + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) HAL_ADC_LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __ADCx_FORCE_RESET(), __ADCx_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location) or with + other device clock parameters configuration: + (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI14; + (+++) RCC_OscInitStructure.HSI14State = RCC_HSI14_OFF; (if not used for system clock) + (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure); + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_Init(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() + to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog 1 callback + (+) ErrorCallback : ADC error callback + (+) LevelOutOfWindow2Callback : ADC analog watchdog 2 callback + (+) LevelOutOfWindow3Callback : ADC analog watchdog 3 callback + (+) EndOfSamplingCallback : ADC end of sampling callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + +/* Fixed timeout values for ADC calibration, enable settling time, disable */ +/* settling time. */ +/* Values defined to be higher than worst cases: low clock frequency, */ +/* maximum prescaler. */ +/* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */ +/* prescaler 4, sampling time 7.5 ADC clock cycles, resolution 12 bits. */ +/* Unit: ms */ +#define ADC_ENABLE_TIMEOUT (2UL) +#define ADC_DISABLE_TIMEOUT (2UL) +#define ADC_STOP_CONVERSION_TIMEOUT (2UL) +#define ADC_CHANNEL_CONF_RDY_TIMEOUT (1UL) + +/* Register CHSELR bits corresponding to ranks 2 to 8 . */ +#define ADC_CHSELR_SQ2_TO_SQ8 (ADC_CHSELR_SQ2 | ADC_CHSELR_SQ3 | ADC_CHSELR_SQ4 | \ + ADC_CHSELR_SQ5 | ADC_CHSELR_SQ6 | ADC_CHSELR_SQ7 | ADC_CHSELR_SQ8) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +static void ADC_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral and regular group according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @note This function configures the ADC within 2 scopes: scope of entire + * ADC and scope of regular group. For parameters details, see comments + * of structure "ADC_InitTypeDef". + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpCFGR1 = 0UL; + uint32_t tmpCFGR2 = 0UL; + uint32_t tmp_adc_reg_is_conversion_on_going; + __IO uint32_t wait_loop_index = 0UL; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler)); + assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution)); + assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign)); + assert_param(IS_ADC_SCAN_MODE(hadc->Init.ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode)); + assert_param(IS_ADC_EXTTRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); + assert_param(IS_ADC_EXTTRIG(hadc->Init.ExternalTrigConv)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2)); + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); + + assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode)); + + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + } + } + + /* ADC group regular discontinuous mode can be enabled only if */ + /* continuous mode is disabled. */ + assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Enable ADC internal voltage regulator */ + LL_ADC_EnableInternalRegulator(hadc->Instance); + + /* Delay for ADC stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* Verification that ADC voltage regulator is correctly enabled, whether */ + /* or not ADC is coming from state reset (if any potential problem of */ + /* clocking, voltage regulator would not be enabled). */ + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Configuration of ADC parameters if previous preliminary actions are */ + /* correctly completed and if there is no conversion on going on regular */ + /* group (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_reg_is_conversion_on_going == 0UL) + ) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Internal voltage regulator (no parameter in HAL ADC init structure) */ + /* - Clock configuration */ + /* - ADC resolution */ + /* - Oversampling */ + /* - discontinuous mode */ + /* - LowPowerAutoWait mode */ + /* - LowPowerAutoPowerOff mode */ + /* - continuous conversion mode */ + /* - overrun */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - data alignment */ + /* - resolution */ + /* - scan direction */ + /* - DMA continuous request */ + /* - Trigger frequency mode */ + /* Note: If low power mode AutoPowerOff is enabled, ADC enable */ + /* and disable phases are performed automatically by hardware */ + /* (in this case, flag ADC_FLAG_RDY is not set). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - internal measurement paths: temperature sensor, Vref */ + /* (set into HAL_ADC_ConfigChannel() ) */ + + tmpCFGR1 |= (hadc->Init.Resolution | + ADC_CFGR1_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR1_AUTOOFF((uint32_t)hadc->Init.LowPowerAutoPowerOff) | + ADC_CFGR1_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + ADC_CFGR1_OVERRUN(hadc->Init.Overrun) | + hadc->Init.DataAlign | + ADC_SCAN_SEQ_MODE(hadc->Init.ScanConvMode) | + ADC_CFGR1_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests)); + + /* Update setting of discontinuous mode only if continuous mode is disabled */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC group regular discontinuous mode */ + tmpCFGR1 |= ADC_CFGR1_DISCEN; + } + else + { + /* ADC regular group discontinuous was intended to be enabled, */ + /* but ADC regular group modes continuous and sequencer discontinuous */ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmpCFGR1 |= ((hadc->Init.ExternalTrigConv & ADC_CFGR1_EXTSEL) | + hadc->Init.ExternalTrigConvEdge); + } + + /* Update ADC configuration register with previous settings */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_RES | + ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | + ADC_CFGR1_CONT | + ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTSEL | + ADC_CFGR1_EXTEN | + ADC_CFGR1_ALIGN | + ADC_CFGR1_SCANDIR | + ADC_CFGR1_DMACFG, + tmpCFGR1); + + tmpCFGR2 |= ((hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.TriggerFrequencyMode + ); + + if (hadc->Init.OversamplingMode == ENABLE) + { + tmpCFGR2 |= (ADC_CFGR2_OVSE | + (hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.Oversampling.Ratio | + hadc->Init.Oversampling.RightBitShift | + hadc->Init.Oversampling.TriggeredMode + ); + } + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_CKMODE | + ADC_CFGR2_LFTRIG | + ADC_CFGR2_OVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS | + ADC_CFGR2_TOVS, + tmpCFGR2); + + /* Configuration of ADC clock mode: asynchronous clock source */ + /* with selectable prescaler. */ + if (((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV1) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV2) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV4)) + { + MODIFY_REG(ADC1_COMMON->CCR, + ADC_CCR_PRESC, + hadc->Init.ClockPrescaler & ADC_CCR_PRESC); + } + } + + /* Channel sampling time configuration */ + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1, hadc->Init.SamplingTimeCommon1); + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_2, hadc->Init.SamplingTimeCommon2); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + /* Channels must be configured into each rank using function */ + /* "HAL_ADC_ConfigChannel()". */ + if (hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else if (hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Count number of ranks available in HAL ADC handle variable */ + uint32_t ADCGroupRegularSequencerRanksCount; + + /* Parse all ranks from 1 to 8 */ + for (ADCGroupRegularSequencerRanksCount = 0UL; ADCGroupRegularSequencerRanksCount < (8UL); ADCGroupRegularSequencerRanksCount++) + { + /* Check each sequencer rank until value of end of sequence */ + if (((hadc->ADCGroupRegularSequencerRanks >> (ADCGroupRegularSequencerRanksCount * 4UL)) & ADC_CHSELR_SQ1) == + ADC_CHSELR_SQ1) + { + break; + } + } + + if (ADCGroupRegularSequencerRanksCount == 1UL) + { + /* Set ADC group regular sequencer: */ + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else + { + /* Set ADC group regular sequencer: */ + /* - Set ADC group regular sequencer to value memorized */ + /* in HAL ADC handle */ + /* Note: This value maybe be initialized at a unknown value, */ + /* therefore after the first call of "HAL_ADC_Init()", */ + /* each rank corresponding to parameter "NbrOfConversion" */ + /* must be set using "HAL_ADC_ConfigChannel()". */ + /* - Set sequencer scan length by clearing ranks above maximum rank */ + /* and do not modify other ranks value. */ + MODIFY_REG(hadc->Instance->CHSELR, + ADC_CHSELR_SQ_ALL, + (ADC_CHSELR_SQ2_TO_SQ8 << (((hadc->Init.NbrOfConversion - 1UL) * ADC_REGULAR_RANK_2) & 0x1FUL)) | (hadc->ADCGroupRegularSequencerRanks) + ); + } + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core peripheral clocking. */ + if (LL_ADC_GetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1) + == hadc->Init.SamplingTimeCommon1) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @note For devices with several ADCs: reset of ADC common registers is done + * only if all ADCs sharing the same common group are disabled. + * (function "HAL_ADC_MspDeInit()" is also called under the same conditions: + * all ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * If this is not the case, reset of these common parameters reset is + * bypassed without error reporting: it can be the intended behavior in + * case of reset of a single ADC while the other ADCs sharing the same + * common group is still running. + * @note By default, HAL_ADC_DeInit() set ADC in mode deep power-down: + * this saves more power by reducing leakage currents + * and is particularly interesting before entering MCU low-power modes. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going, on regular group */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + + /* Disable ADC internal voltage regulator */ + LL_ADC_DisableInternalRegulator(hadc->Instance); + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ + + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | + ADC_IT_AWD1 | ADC_IT_OVR | + ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY)); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | + ADC_FLAG_AWD1 | ADC_FLAG_OVR | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + + /* Reset register CFGR1 */ + hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES | + ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE; + + /* Reset register SMPR */ + hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; + + /* Reset register TR1 */ + hadc->Instance->TR1 &= ~(ADC_TR1_HT1 | ADC_TR1_LT1); + + /* Reset register CHSELR */ + hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CCR */ + ADC1_COMMON->CCR &= ~(ADC_CCR_TSEN | ADC_CCR_VREFEN | ADC_CCR_PRESC); + + /* ========== Hard reset ADC peripheral ========== */ + /* Performs a global reset of the entire ADC peripheral: ADC state is */ + /* forced to a similar state after device power-on. */ + /* If needed, copy-paste and uncomment the following reset code into */ + /* function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */ + /* */ + /* __HAL_RCC_ADC1_FORCE_RESET() */ + /* __HAL_RCC_ADC1_RELEASE_RESET() */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Reset HAL ADC handle variable */ + hadc->ADCGroupRegularSequencerRanks = 0x00000000UL; + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = pCallback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion DMA half-transfer callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC analog watchdog 1 callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID ADC analog watchdog 2 callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID ADC analog watchdog 3 callback ID + * @arg @ref HAL_ADC_END_OF_SAMPLING_CB_ID ADC end of sampling callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : + hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_3_CB_ID : + hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; + break; + + case HAL_ADC_END_OF_SAMPLING_CB_ID : + hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular group. + (+) Stop conversion of regular group. + (+) Poll for conversion complete on regular group. + (+) Poll for conversion event. + (+) Get result of regular channel conversion. + (+) Start conversion of regular group and enable interruptions. + (+) Stop conversion of regular group and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion of regular group and enable DMA transfer. + (+) Stop conversion of regular group and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion of regular group. + * @note Interruptions enabled in this function: None. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected channels in + * case of auto_injection mode), disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential + * conversion on injected group. If injected group is under use, it + * should be preliminarily stopped using HAL_ADCEx_InjectedStop function. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for regular group conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function, with an exception: + * if low power feature "LowPowerAutoWait" is enabled, flags are + * not cleared to not interfere with this feature until data register + * is read using function HAL_ADC_GetValue(). + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion (ADC init + * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV). + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence (ADC init + * parameter "EOCSelection" set to ADC_EOC_SEQ_CONV). + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t tmp_Flag_End; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* If end of conversion selected to end of sequence conversions */ + if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV) + { + tmp_Flag_End = ADC_FLAG_EOS; + } + /* If end of conversion selected to end of unitary conversion */ + else /* ADC_EOC_SINGLE_CONV */ + { + /* Verification that ADC configuration is compliant with polling for */ + /* each conversion: */ + /* Particular case is ADC configured in DMA mode and ADC sequencer with */ + /* several ranks and polling for end of each conversion. */ + /* For code simplicity sake, this particular case is generalized to */ + /* ADC configured in DMA mode and and polling for end of each conversion. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + return HAL_ERROR; + } + else + { + tmp_Flag_End = (ADC_FLAG_EOC); + } + } + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Clear end of conversion flag of regular group if low power feature */ + /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ + /* until data register is read using function HAL_ADC_GetValue(). */ + if (hadc->Init.LowPowerAutoWait == DISABLE) + { + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * @arg @ref ADC_EOSMP_EVENT ADC End of Sampling event + * @arg @ref ADC_AWD1_EVENT ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices) + * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 families) + * @arg @ref ADC_OVR_EVENT ADC Overrun event + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_OVR_DATA_OVERWRITTEN. Otherwise, data register may be potentially overwritten + * by a new converted data as soon as OVR is cleared. + * To reset OVR flag once the preserved data is retrieved, the user can resort + * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + switch (EventType) + { + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + + break; + + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + + break; + + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + + break; + + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC, start conversion of regular group with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @note By default, HAL_ADC_Start_IT() does not enable the End Of Sampling + * interruption. If required (e.g. in case of oversampling with trigger + * mode), the user must: + * 1. first clear the EOSMP flag if set with macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP) + * 2. then enable the EOSMP interrupt with macro __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOSMP) + * before calling HAL_ADC_Start_IT(). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC group regular conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* Enable ADC end of conversion interrupt */ + switch (hadc->Init.EOCSelection) + { + case ADC_EOC_SEQ_CONV: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); + break; + /* case ADC_EOC_SINGLE_CONV */ + default: + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC); + break; + } + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_OVR_DATA_PRESERVED, only then is + ADC_IT_OVR enabled; otherwise data overwrite is considered as normal + behavior and no CPU time is lost for a non-processed interruption */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + } + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt for regular group */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Enable ADC, start conversion of regular group and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Perform ADC enable and conversion start if no conversion is on going */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Process locked */ + __HAL_LOCK(hadc); + + /* Specific case for first call occurrence of this function (DMA transfer */ + /* not activated and ADC disabled), DMA transfer must be activated */ + /* with ADC disabled. */ + if ((hadc->Instance->CFGR1 & ADC_CFGR1_DMAEN) == 0UL) + { + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Disable ADC */ + LL_ADC_Disable(hadc->Instance); + } + + /* Enable ADC DMA mode */ + hadc->Instance->CFGR1 |= ADC_CFGR1_DMAEN; + } + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to regular group conversion results */ + /* - Set state bitfield related to regular operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, + HAL_ADC_STATE_REG_BUSY); + + /* Set ADC error code */ + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC */ + /* start (in case of SW start): */ + + /* Clear regular group conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_OVR)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Enable ADC overrun interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); + + /* Enable conversion of regular group. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group regular conversion */ + LL_ADC_REG_StartConversion(hadc->Instance); + } + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Stop ADC conversion of regular group (and injected group in + * case of auto_injection mode), disable ADC DMA transfer, disable + * ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC group regular conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC regular group conversion result. + * @note Reading register DR automatically clears ADC flag EOC + * (ADC group regular end of unitary conversion). + * @note This function does not clear ADC flag EOS + * (ADC group regular end of sequence conversion). + * Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * To clear this flag, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC group regular conversion data + */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Note: EOC flag is not cleared here by software because automatically */ + /* cleared by hardware when reading register DR. */ + + /* Return ADC converted value */ + return hadc->Instance->DR; +} + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_isr = hadc->Instance->ISR; + uint32_t tmp_ier = hadc->Instance->IER; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); + + /* ========== Check End of Sampling flag for ADC group regular ========== */ + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + { + /* Update state machine on end of sampling status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + } + + /* End Of Sampling callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->EndOfSamplingCallback(hadc); +#else + HAL_ADCEx_EndOfSamplingCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + } + + /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + } + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if ( __HAL_ADC_GET_FLAG(&hadc, ADC_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear regular group conversion flag */ + /* Note: in case of overrun set to ADC_OVR_DATA_PRESERVED, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + } + + /* ========== Check analog watchdog 2 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD2) == ADC_FLAG_AWD2) && ((tmp_ier & ADC_IT_AWD2) == ADC_IT_AWD2)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Level out of window 2 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow2Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow2Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + } + + /* ========== Check analog watchdog 3 flag ========== */ + if (((tmp_isr & ADC_FLAG_AWD3) == ADC_FLAG_AWD3) && ((tmp_ier & ADC_IT_AWD3) == ADC_IT_AWD3)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Level out of window 3 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindow3Callback(hadc); +#else + HAL_ADCEx_LevelOutOfWindow3Callback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + } + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_FLAG_OVR) == ADC_FLAG_OVR) && ((tmp_ier & ADC_IT_OVR) == ADC_IT_OVR)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ + if (LL_ADC_REG_GetDMATransfer(hadc->Instance) != LL_ADC_REG_DMA_TRANSFER_NONE) + { + overrun_error = 1UL; + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + + /* ========== Check channel configuration ready flag ========== */ + if (((tmp_isr & ADC_FLAG_CCRDY) == ADC_FLAG_CCRDY) && ((tmp_ier & ADC_IT_CCRDY) == ADC_IT_CCRDY)) + { + /* Level out of window 1 callback */ + HAL_ADCEx_ChannelConfigReadyCallback(hadc); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_CCRDY); + } +} + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 1 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on regular group + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC group regular. + * @note In case of usage of internal measurement channels: + * VrefInt/TempSensor. + * These internal paths can be disabled using function + * HAL_ADC_DeInit(). + * @note Possibility to update parameters on the fly: + * This function initializes channel into ADC group regular, + * following calls to this function can be used to reconfigure + * some parameters of structure "ADC_ChannelConfTypeDef" on the fly, + * without resetting the ADC. + * The setting of these parameters is conditioned to ADC state: + * Refer to comments of structure "ADC_ChannelConfTypeDef". + * @param hadc ADC handle + * @param sConfig Structure of ADC channel assigned to ADC group regular. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(sConfig->Channel)); + assert_param(IS_ADC_SAMPLING_TIME_COMMON(sConfig->SamplingTime)); + + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(sConfig->Rank)); + } + else + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel sampling time */ + /* - Management of internal measurement channels: VrefInt/TempSensor */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure channel: depending on rank setting, add it or remove it from */ + /* ADC sequencer. */ + /* If sequencer set to not fully configurable with channel rank set to */ + /* none, remove the channel from the sequencer. */ + /* Otherwise (sequencer set to fully configurable or to to not fully */ + /* configurable with channel rank to be set), configure the selected */ + /* channel. */ + if (sConfig->Rank != ADC_RANK_NONE) + { + /* Regular sequence configuration */ + /* Note: ADC channel configuration requires few ADC clock cycles */ + /* to be ready. Processing of ADC settings in this function */ + /* induce that a specific wait time is not necessary. */ + /* For more details on ADC channel configuration ready, */ + /* refer to function "LL_ADC_IsActiveFlag_CCRDY()". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Set the channel by enabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChAdd(hadc->Instance, sConfig->Channel); + } + else + { + /* Sequencer set to fully configurable: */ + /* Set the channel by entering it into the selected rank. */ + + /* Memorize the channel set into variable in HAL ADC handle */ + MODIFY_REG(hadc->ADCGroupRegularSequencerRanks, + ADC_CHSELR_SQ1 << (sConfig->Rank & 0x1FUL), + __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel) << (sConfig->Rank & 0x1FUL)); + + /* If the selected rank is below ADC group regular sequencer length, */ + /* apply the configuration in ADC register. */ + /* Note: Otherwise, configuration is not applied. */ + /* To apply it, parameter'NbrOfConversion' must be increased. */ + if (((sConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion) + { + LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel); + } + } + + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime); + + /* Management of internal measurement channels: VrefInt/TempSensor */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit() or removing the channel from sequencer with */ + /* channel configuration parameter "Rank". */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else if ((sConfig->Channel == ADC_CHANNEL_VREFINT) && + ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + else + { + /* Regular sequencer configuration */ + /* Note: Case of sequencer set to fully configurable: */ + /* Sequencer rank cannot be disabled, only affected to */ + /* another channel. */ + /* To remove a rank, use parameter 'NbrOfConversion". */ + if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD)) + { + /* Sequencer set to not fully configurable: */ + /* Reset the channel by disabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChRem(hadc->Instance, sConfig->Channel); + } + + /* Management of internal measurement channels: VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VREFINT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), + ~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Configure the analog watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the selected analog watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without resetting + * the ADC. + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_AnalogWDGConfTypeDef". + * @note On this STM32 series, analog watchdog thresholds can be modified + * while ADC conversion is on going. + * In this case, some constraints must be taken into account: + * the programmed threshold values are effective from the next + * ADC EOC (end of unitary conversion). + * Considering that registers write delay may happen due to + * bus activity, this might cause an uncertainty on the + * effective timing of the new programmed threshold values. + * @param hadc ADC handle + * @param AnalogWDGConfig Structure of ADC analog watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmpAWDHighThresholdShifted; + uint32_t tmpAWDLowThresholdShifted; + uint32_t backup_setting_adc_enable_state = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(AnalogWDGConfig->WatchdogNumber)); + assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); + assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); + + if (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) + { + assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel)); + } + + /* Verify thresholds range */ + if (hadc->Init.OversamplingMode == ENABLE) + { + /* Case of oversampling enabled: depending on ratio and shift configuration, + analog watchdog thresholds can be higher than ADC resolution. + Verify if thresholds are within maximum thresholds range. */ + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold)); + } + else + { + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on ADC group regular: */ + /* - Analog watchdog channels */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Analog watchdog configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Constraint of ADC on this STM32 series: ADC must be disable + to modify bitfields of register ADC_CFGR1 */ + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + backup_setting_adc_enable_state = 1UL; + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + } + + /* Configuration of analog watchdog: */ + /* - Set the analog watchdog enable mode: one or overall group of */ + /* channels. */ + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, + __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR)); + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); + break; + } + + if (backup_setting_adc_enable_state == 1UL) + { + tmp_hal_status = ADC_Enable(hadc); + } + + /* Update state, clear previous result related to AWD1 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD1(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD1(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD1(hadc->Instance); + } + } + /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ + else + { + switch (AnalogWDGConfig->WatchdogMode) + { + case ADC_ANALOGWATCHDOG_SINGLE_REG: + /* Update AWD by bitfield to keep the possibility to monitor */ + /* several channels by successive calls of this function. */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + else + { + SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel))); + } + break; + + case ADC_ANALOGWATCHDOG_ALL_REG: + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG); + break; + + default: /* ADC_ANALOGWATCHDOG_NONE */ + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE); + break; + } + + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) + { + /* Update state, clear previous result related to AWD2 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD2(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD2(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD2(hadc->Instance); + } + } + /* (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */ + else + { + /* Update state, clear previous result related to AWD3 */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD3); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD3(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (AnalogWDGConfig->ITMode == ENABLE) + { + LL_ADC_EnableIT_AWD3(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD3(hadc->Instance); + } + } + } + + } + + /* Analog watchdog thresholds configuration */ + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + { + /* Shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold); + tmpAWDLowThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold); + } + /* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */ + else + { + /* No need to shift the offset with respect to the selected ADC resolution: */ + /* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */ + /* are set to 0. */ + tmpAWDHighThresholdShifted = AnalogWDGConfig->HighThreshold; + tmpAWDLowThresholdShifted = AnalogWDGConfig->LowThreshold; + } + + /* Set ADC analog watchdog thresholds value of both thresholds high and low */ + LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted, + tmpAWDLowThresholdShifted); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_REG_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped to disable the ADC. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped on regular group to bypass */ + /* this function if not needed. */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + /* Stop potential conversion on going on regular group */ + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + + /* Wait for conversion effectively stopped */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; + + /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ + /* enabling phase not yet completed: flag ADC ready not yet set). */ + /* Timeout implemented to not be stuck if ADC cannot be enabled (possible */ + /* causes: ADC clock not running, ...). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Check if conditions to enable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + + if ((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL) + { + /* Delay for temperature sensor buffer stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + /* If low power mode AutoPowerOff is enabled, power-on/off phases are */ + /* performed automatically by hardware and flag ADC ready is not set. */ + if (hadc->Init.LowPowerAutoPowerOff != ENABLE) + { + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + { + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + uint32_t tickstart; + const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); + + /* Verification if ADC is not already disabled: */ + /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ + /* disabled. */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_disable_on_going == 0UL) + ) + { + /* Check if conditions to disable the ADC are fulfilled */ + if ((hadc->Instance->CR & (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + + /* Wait for ADC effectively disabled */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); + + /* Determine whether any further conversion upcoming on group regular */ + /* by external trigger, continuous mode or scan sequence on going */ + /* to disable interruption. */ + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc_ex.c new file mode 100644 index 0000000000..95adee1c0c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc_ex.c @@ -0,0 +1,392 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_adc_ex.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Operation functions + * ++ Calibration + * +++ ADC automatic self-calibration + * +++ Calibration factors get or set + * Other functions (generic functions) are available in file + * "stm32c0xx_hal_adc.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + [..] + (@) Sections "ADC peripheral features" and "How to use this driver" are + available in file of generic functions "stm32c0xx_hal_adc.c". + [..] + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup ADCEx ADCEx + * @brief ADC Extended HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Constants ADC Extended Private Constants + * @{ + */ + +/* Fixed timeout value for ADC calibration. */ +/* Values defined to be higher than worst cases: maximum ratio between ADC */ +/* and CPU clock frequencies. */ +/* Example of profile low frequency : ADC frequency at 31.25kHz (ADC clock */ +/* source 8MHz, ADC clock prescaler 256), CPU frequency 48MHz. */ +/* Calibration time max = 116 / fADC (refer to datasheet) */ +/* = 178 176 CPU cycles */ +#define ADC_CALIBRATION_TIMEOUT (178176UL) /*!< ADC calibration time-out value (unit: CPU cycles) */ +#define ADC_DISABLE_TIMEOUT (2UL) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Functions ADC Extended Exported Functions + * @{ + */ + +/** @defgroup ADCEx_Exported_Functions_Group1 Extended Input and Output operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Perform the ADC self-calibration. + (+) Get calibration factors. + (+) Set calibration factors. + +@endverbatim + * @{ + */ + +/** + * @brief Perform an ADC automatic self-calibration + * Calibration prerequisite: ADC must be disabled (execute this + * function before HAL_ADC_Start() or after HAL_ADC_Stop() ). + * @note Calibration factor can be read after calibration, using function + * HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]). + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + __IO uint32_t wait_loop_index = 0UL; + uint32_t backup_setting_adc_dma_transfer; /* Note: Variable not declared as volatile because register read is already declared as volatile */ + uint32_t calibration_index; + uint32_t calibration_factor_accumulated = 0; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Calibration prerequisite: ADC must be disabled. */ + + /* Disable the ADC (if not already disabled) */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Disable ADC DMA transfer request during calibration */ + /* Note: Specificity of this STM32 series: Calibration factor is */ + /* available in data register and also transferred by DMA. */ + /* To not insert ADC calibration factor among ADC conversion data */ + /* in array variable, DMA transfer must be disabled during */ + /* calibration. */ + backup_setting_adc_dma_transfer = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG); + + /* ADC calibration procedure */ + /* Note: Perform an averaging of 8 calibrations for optimized accuracy */ + for (calibration_index = 0UL; calibration_index < 8UL; calibration_index++) + { + /* Start ADC calibration */ + LL_ADC_StartCalibration(hadc->Instance); + + /* Wait for calibration completion */ + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + { + wait_loop_index++; + if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + __HAL_UNLOCK(hadc); + + return HAL_ERROR; + } + } + + calibration_factor_accumulated += LL_ADC_GetCalibrationFactor(hadc->Instance); + } + /* Compute average */ + calibration_factor_accumulated /= calibration_index; + /* Apply calibration factor */ + LL_ADC_Enable(hadc->Instance); + LL_ADC_SetCalibrationFactor(hadc->Instance, calibration_factor_accumulated); + LL_ADC_Disable(hadc->Instance); + + /* Wait for ADC effectively disabled before changing configuration */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + } + + /* Restore ADC DMA transfer request after calibration */ + SET_BIT(hadc->Instance->CFGR1, backup_setting_adc_dma_transfer); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Note: No need to update variable "tmp_hal_status" here: already set */ + /* to state "HAL_ERROR" by function disabling the ADC. */ + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get the calibration factor. + * @param hadc ADC handle. + * @retval Calibration value. + */ +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return the selected ADC calibration value */ + return ((hadc->Instance->CALFACT) & 0x0000007FU); +} + +/** + * @brief Set the calibration factor to overwrite automatic conversion result. + * ADC must be enabled and no conversion is ongoing. + * @param hadc ADC handle + * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) + * @retval HAL state + */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_adc_is_conversion_on_going_regular; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CALFACT(CalibrationFactor)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Verification of hardware constraints before modifying the calibration */ + /* factors register: ADC must be enabled, no conversion on going. */ + tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); + + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) + && (tmp_adc_is_conversion_on_going_regular == 0UL) + ) + { + hadc->Instance->CALFACT &= ~ADC_CALFACT_CALFACT; + hadc->Instance->CALFACT |= CalibrationFactor; + } + else + { + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + /* Update ADC error code */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + /* Update ADC state machine to error */ + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Analog watchdog 2 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow2Callback must be implemented in the user file. + */ +} + +/** + * @brief Analog watchdog 3 callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_LevelOutOfWindow3Callback must be implemented in the user file. + */ +} + + +/** + * @brief End Of Sampling callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_EndOfSamplingCallback must be implemented in the user file. + */ +} + +/** + * @brief ADC channel configuration ready callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADCEx_ChannelConfigReadyCallback must be implemented in the user file. + */ +} + +/** + * @} + */ + +/** + * @brief Disable ADC voltage regulator. + * @note Disabling voltage regulator allows to save power. This operation can + * be carried out only when ADC is disabled. + * @note To enable again the voltage regulator, the user is expected to + * resort to HAL_ADC_Init() API. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Setting of this feature is conditioned to ADC state: ADC must be ADC disabled */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_DisableInternalRegulator(hadc->Instance); + tmp_hal_status = HAL_OK; + } + else + { + tmp_hal_status = HAL_ERROR; + } + + return tmp_hal_status; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_cortex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_cortex.c new file mode 100644 index 0000000000..093366716c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_cortex.c @@ -0,0 +1,423 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex M0+ exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32c0xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32c0xx.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32c0xx devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0+ based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(SubPriority); + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn, PreemptPriority); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate + * CMSIS device file (stm32c0xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1U) +/** + * @brief Enable the MPU. + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != 0U) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc.c new file mode 100644 index 0000000000..716a0eb60e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc.c @@ -0,0 +1,516 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_crc.c + * @author MCD Application Team + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + (++) specify generating polynomial (peripheral default or non-default one) + (++) specify initialization value (peripheral default or non-default one) + (++) specify input data format + (++) specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CRC_Private_Functions CRC Private Functions + * @{ + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP (MCU Specific Package) + (+) DeInitialize the CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CRC according to the specified + * parameters in the CRC_InitTypeDef and create the associated handle. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if (hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + hcrc->State = HAL_CRC_STATE_BUSY; + + /* check whether or not non-default generating polynomial has been + * picked up by user */ + assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); + if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) + { + /* initialize peripheral with default generating polynomial */ + WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); + } + else + { + /* initialize CRC peripheral with generating polynomial defined by user */ + if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* check whether or not non-default CRC initial value has been + * picked up by user */ + assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); + if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) + { + WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); + } + else + { + WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); + } + + + /* set input data inversion mode */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); + + /* set output data inversion mode */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); + + /* makes sure the input data format (bytes, halfwords or words stream) + * is properly specified by user */ + assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CRC peripheral. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Check the CRC peripheral state */ + if (hcrc->State == HAL_CRC_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC calculation unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Reset IDR register content */ + CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR); + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + using combination of the previous CRC value and the new one. + + [..] or + + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with the previously computed CRC as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter Data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with hcrc->Instance->INIT as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit (hcrc->Instance->INIT is + * written in hcrc->Instance->DR) */ + __HAL_CRC_DR_RESET(hcrc); + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter 32-bit input data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + /* Specific 8-bit input data handling */ + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + /* Specific 16-bit input data handling */ + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CRC handle state. + * @param hcrc CRC handle + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) +{ + /* Return CRC handle state */ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Enter 8-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + uint16_t data; + __IO uint16_t *pReg; + + /* Processing time optimization: 4 bytes are entered in a row with a single word write, + * last bytes must be carefully fed to the CRC calculator to ensure a correct type + * handling by the peripheral */ + for (i = 0U; i < (BufferLength / 4U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ + ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ + ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ + (uint32_t)pBuffer[(4U * i) + 3U]; + } + /* last bytes specific handling */ + if ((BufferLength % 4U) != 0U) + { + if ((BufferLength % 4U) == 1U) + { + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ + } + if ((BufferLength % 4U) == 2U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + } + if ((BufferLength % 4U) == 3U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ + } + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Enter 16-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + __IO uint16_t *pReg; + + /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, + * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure + * a correct type handling by the peripheral */ + for (i = 0U; i < (BufferLength / 2U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; + } + if ((BufferLength % 2U) != 0U) + { + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = pBuffer[2U * i]; + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc_ex.c new file mode 100644 index 0000000000..e735dc957b --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_crc_ex.c @@ -0,0 +1,223 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_crc_ex.c + * @author MCD Application Team + * @brief Extended CRC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the CRC peripheral. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set() + (+) Configure Input or Output data inversion + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions + * @{ + */ + +/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Extended configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the generating polynomial + (+) Configure the input data inversion + (+) Configure the output data inversion + +@endverbatim + * @{ + */ + + +/** + * @brief Initialize the CRC polynomial if different from default one. + * @param hcrc CRC handle + * @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long). + * This parameter is written in normal representation, e.g. + * @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength CRC polynomial length. + * This parameter can be one of the following values: + * @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7) + * @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8) + * @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16) + * @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U)) + { + } + + switch (PolyLength) + { + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) + { + status = HAL_ERROR; + } + break; + + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + default: + status = HAL_ERROR; + break; + } + if (status == HAL_OK) + { + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + } + /* Return function status */ + return status; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc CRC handle + * @param InputReverseMode Input Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value) + * @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc CRC handle + * @param OutputReverseMode Output Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value) + * @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma.c new file mode 100644 index 0000000000..17731b4916 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma.c @@ -0,0 +1,1079 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the CLK shall be enabled for both DMA & DMAMUX + thanks to: + DMA1 : __HAL_RCC_DMA1_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e. a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + /* calculation of the channel index */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - \ + (uint32_t)DMA1_Channel1)) << 2U; + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + CLEAR_BIT(hdma->Instance->CCR, (DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Set the DMA Channel configuration */ + SET_BIT(hdma->Instance->CCR, (hdma->Init.Direction | \ + hdma->Init.PeriphInc | hdma->Init.MemInc | \ + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | \ + hdma->Init.Mode | hdma->Init.Priority)); + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* calculation of the channel index */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - \ + (uint32_t)DMA1_Channel1)) << 2U; + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1cU))); + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0UL) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + + /* Process locked */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, + uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* Check the DMA peripheral handle */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1cU))); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Unlocked/locked */ + __HAL_UNLOCK(hdma); + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1cU))); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, + uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (0U == __HAL_DMA_GET_FLAG(hdma, temp)) + { + if (0U != __HAL_DMA_GET_FLAG(hdma, (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1cU)))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1cU))); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU))); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU))); + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = DMA1->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU))); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU)))) && (0U != (source_it & DMA_IT_TC))) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU))); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1cU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1cU))); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, + void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + /* Clear all flags */ + __HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1cU))); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Peripheral to Memory */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on stream number + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + \ + ((hdma->ChannelIndex >> 2U) * \ + ((uint32_t)DMAMUX1_Channel1 - \ + (uint32_t)DMAMUX1_Channel0))); + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1cU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + \ + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to 4, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma_ex.c new file mode 100644 index 0000000000..1df7b617ee --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_dma_ex.c @@ -0,0 +1,298 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler + should be called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig Pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << \ + DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | \ + ((uint32_t)pSyncConfig->SyncEnable << \ + DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << \ + DMAMUX_CxCR_EGE_Pos)); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /*DMA State not Ready*/ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig Pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters*/ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_exti.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_exti.c new file mode 100644 index 0000000000..a0b65f4377 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_exti.c @@ -0,0 +1,667 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04u /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0U) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + regval |= (pExtiConfig->GPIOSel << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + EXTI->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configiguration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0U) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0U) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0U) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0U) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[(linepos >> 2U) & 0x03UL]; + pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3U - (linepos & 0x03U)))) >> 24U); + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = EXTI->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(EXTI_EXTICR1_EXTI0 << (EXTI_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + EXTI->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicaated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, + void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->RisingCallback = pPendingCbfn; + hexti->FallingCallback = pPendingCbfn; + break; + + case HAL_EXTI_RISING_CB_ID: + hexti->RisingCallback = pPendingCbfn; + break; + + case HAL_EXTI_FALLING_CB_ID: + hexti->FallingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get rising edge pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0U) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->RisingCallback != NULL) + { + hexti->RisingCallback(); + } + } + + /* Get falling edge pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0U) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call rising callback */ + if (hexti->FallingCallback != NULL) + { + hexti->FallingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get rising edge pending bit */ + regaddr = (__IO uint32_t *)(&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING + * @arg @ref EXTI_TRIGGER_FALLING + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + + if (Edge != EXTI_TRIGGER_RISING) + { + /* Get falling edge pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->FPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + else + { + /* Get falling edge pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->RPR1 + (EXTI_CONFIG_OFFSET * offset)); + } + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (__IO uint32_t *)(&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash.c new file mode 100644 index 0000000000..06d799e002 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash.c @@ -0,0 +1,699 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32C0xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There are two modes of programming: + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions: + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache + (+) Reset the Instruction cache + (+) Enable/Disable the Flash power-down during low-power modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_TYPENONE, \ + .Address = 0U, \ + .Page = 0U, \ + .NbPagesToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + CLEAR_BIT(FLASH->CR, TypeProgram); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = TypeProgram; + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_FAST_PROGRAM_ADDRESS(Address)); + + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + } + + /* return status */ + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param = 0xFFFFFFFFU; + uint32_t error; + + /* Save flash errors */ + error = (FLASH->SR & FLASH_FLAG_SR_ERROR); + + CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing); + + /* A] Set parameter for user or error callbacks */ + /* check operation was a program or erase */ + if ((pFlash.ProcedureOnGoing & (FLASH_TYPEPROGRAM_DOUBLEWORD | FLASH_TYPEPROGRAM_FAST)) != 0x00U) + { + /* return address being programmed */ + param = pFlash.Address; + } + else if ((pFlash.ProcedureOnGoing & (FLASH_TYPEERASE_MASS | FLASH_TYPEERASE_PAGES)) != 0x00U) + { + /* return page number being erased (0 for mass erase) */ + param = pFlash.Page; + } + else + { + /* Nothing to do */ + } + + /* B] Check errors */ + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* clear error flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + + /* Error callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* C] Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != 0x00U) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + if (pFlash.ProcedureOnGoing == FLASH_TYPEERASE_PAGES) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if (pFlash.NbPagesToErase != 0x00U) + { + /* Increment page number */ + pFlash.Page++; + FLASH_PageErase(pFlash.Page); + } + else + { + /* No more pages to erase: stop erase pages procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + } + else + { + /*Stop the ongoing procedure */ + pFlash.ProcedureOnGoing = FLASH_TYPENONE; + } + + /* User callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == FLASH_TYPENONE) + { + /* Disable End of Operation and Error interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page which has been erased + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* verify Flash is unlock */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + /* verify Flash is locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + + /* verify option bytes are unlocked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) == 0x00U) + { + status = HAL_OK; + } + } + + return status; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + /* verify option bytes are locked */ + if (READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0x00u) + { + status = HAL_OK; + } + + return status; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* We should not reach here : Option byte launch generates Option byte reset + so return error */ + return HAL_ERROR; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be + * @arg @ref HAL_FLASH_ERROR_NONE No error set + * @arg @ref HAL_FLASH_ERROR_OP FLASH Operation error + * @arg @ref HAL_FLASH_ERROR_PROG FLASH Programming error + * @arg @ref HAL_FLASH_ERROR_WRP FLASH Write protection error + * @arg @ref HAL_FLASH_ERROR_PGA FLASH Programming alignment error + * @arg @ref HAL_FLASH_ERROR_SIZ FLASH Size error + * @arg @ref HAL_FLASH_ERROR_PGS FLASH Programming sequence error + * @arg @ref HAL_FLASH_ERROR_MIS FLASH Fast programming data miss error + * @arg @ref HAL_FLASH_ERROR_FAST FLASH Fast programming error + * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error (PCROP) + * @arg @ref HAL_FLASH_ERROR_OPTV FLASH Option validity error + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t error; + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + uint32_t timeout = HAL_GetTick() + Timeout; + + /* Wait if any operation is ongoing */ + while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + /* check flash errors */ + error = (FLASH->SR & FLASH_FLAG_SR_ERROR); + + /* clear error flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + if (error != 0x00U) + { + /*Save the error code*/ + pFlash.ErrorCode = error; + + return HAL_ERROR; + } + + /* Wait for control register to be written */ + timeout = HAL_GetTick() + Timeout; + + while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_CFGBSY) != 0x00U) + { + if (HAL_GetTick() >= timeout) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(uint32_t *)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(uint32_t *)(Address + 4U) = (uint32_t)(Data >> 32U); +} + +/** + * @brief Fast program a 32 row double-word (64-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param DataAddress Specifies the address where the data are stored. + * @retval None + */ +static __RAM_FUNC void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint8_t index = 0; + uint32_t dest = Address; + uint32_t src = DataAddress; + uint32_t primask_bit; + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Enter critical section: row programming should not be longer than 7 ms */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Fast Program : 64 words */ + while (index < 64U) + { + *(uint32_t *)dest = *(uint32_t *)src; + src += 4U; + dest += 4U; + index++; + } + + /* wait for BSY1 in order to be sure that flash operation is ended befoire + allowing prefetch in flash. Timeout does not return status, as it will + be anyway done later */ + while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U) + { + } + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash_ex.c new file mode 100644 index 0000000000..82a46b7af1 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash_ex.c @@ -0,0 +1,866 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32C0xx + devices contains the following additional features + + (+) Capacity up to 128 Kbytes with single bank architecture supporting read-while-write + capability (RWW) + (+) Single bank memory organization + (+) PCROP protection + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32C0xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + (++) Set Securable memory area and boot entry point + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get Securable memory area and boot entry point information + + (#) Enable or disable debugger usage using HAL_FLASHEx_EnableDebugger and + HAL_FLASHEx_DisableDebugger. + + (#) Check is flash content is empty or not using HAL_FLASHEx_FlashEmptyCheck. + and modify this setting (for flash loader purpose e.g.) using + HAL_FLASHEx_ForceFlashEmpty. + + (#) Enable securable memory area protectionusing HAL_FLASHEx_EnableSecMemProtection + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(void); +void FLASH_FlushCaches(void); +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel); +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr); +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr); +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr); +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr); +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize); +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @param[out] PageError Pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Mass erase to be done */ + FLASH_MassErase(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for (index = pEraseInit->Page; index < (pEraseInit->Page + pEraseInit->NbPages); index++) + { + /* Start erase page */ + FLASH_PageErase(index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = index; + break; + } + } + + /* If operation is completed or interrupted, disable the Page Erase Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PER); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* save procedure for interrupt treatment */ + pFlash.ProcedureOnGoing = pEraseInit->TypeErase; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS) + { + /* Set Page to 0 for Interrupt callback management */ + pFlash.Page = 0; + + /* Proceed to Mass Erase */ + FLASH_MassErase(); + } + else + { + /* Erase by page to be done */ + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Page); + } + } + + /* return status */ + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note To configure any option bytes, the option lock bit OPTLOCK must be + * cleared with the call of @ref HAL_FLASH_OB_Unlock() function. + * @note New option bytes configuration will be taken into account only + * - after an option bytes launch through the call of @ref HAL_FLASH_OB_Launch() + * - a Power On Reset + * - an exit from Standby or Shutdown mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + uint32_t optr; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0x00U) + { + /* Configure of Write protection on the selected area */ + FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset); + } + + /* Option register */ + if ((pOBInit->OptionType & (OPTIONBYTE_RDP | OPTIONBYTE_USER)) == (OPTIONBYTE_RDP | OPTIONBYTE_USER)) + { + /* Fully modify OPTR register with RDP & user data */ + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_RDP) != 0x00U) + { + /* Only modify RDP so get current user data */ + optr = FLASH_OB_GetUser(); + FLASH_OB_OptrConfig(optr, optr, pOBInit->RDPLevel); + } + else if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0x00U) + { + /* Only modify user so get current RDP level */ + optr = FLASH_OB_GetRDP(); + FLASH_OB_OptrConfig(pOBInit->USERType, pOBInit->USERConfig, optr); + } + else + { + /* nothing to do */ + } + + /* PCROP Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0x00U) + { + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(pOBInit->PCROPConfig)); + + if ((pOBInit->PCROPConfig & (OB_PCROP_ZONE_A | OB_PCROP_RDP_ERASE)) != 0x00U) + { + /* Configure the 1A Proprietary code readout protection */ + FLASH_OB_PCROP1AConfig(pOBInit->PCROPConfig, pOBInit->PCROP1AStartAddr, pOBInit->PCROP1AEndAddr); + } + + if ((pOBInit->PCROPConfig & OB_PCROP_ZONE_B) != 0x00U) + { + /* Configure the 1B Proprietary code readout protection */ + FLASH_OB_PCROP1BConfig(pOBInit->PCROP1BStartAddr, pOBInit->PCROP1BEndAddr); + } + } + + /* Securable Memory Area Configuration */ + if ((pOBInit->OptionType & OPTIONBYTE_SEC) != 0x00U) + { + /* Configure the securable memory area protection */ + FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize); + } + + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @note warning: this API only read flash register, it does not reflect any + * change that would have been programmed between previous Option byte + * loading and current call. + * @param pOBInit Pointer to an @ref FLASH_OBProgramInitTypeDef structure that contains the + * configuration information. The fields pOBInit->WRPArea and + * pOBInit->PCROPConfig should indicate which area is requested + * for the WRP and PCROP. + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = OPTIONBYTE_ALL; + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + pOBInit->USERType = OB_USER_ALL; + + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP1A(&(pOBInit->PCROPConfig), &(pOBInit->PCROP1AStartAddr), &(pOBInit->PCROP1AEndAddr)); + FLASH_OB_GetPCROP1B(&(pOBInit->PCROP1BStartAddr), &(pOBInit->PCROP1BEndAddr)); + pOBInit->PCROPConfig |= (OB_PCROP_ZONE_A | OB_PCROP_ZONE_B); + + /* Get the Securable Memory Area protection */ + FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize)); +} + +/** + * @brief Enable Debugger. + * @note After calling this API, flash interface allow debugger intrusion. + * @retval None + */ +void HAL_FLASHEx_EnableDebugger(void) +{ + FLASH->ACR |= FLASH_ACR_DBG_SWEN; +} + +/** + * @brief Disable Debugger. + * @note After calling this API, Debugger is disabled: it is no more possible to + * break, see CPU register, etc... + * @retval None + */ +void HAL_FLASHEx_DisableDebugger(void) +{ + FLASH->ACR &= ~FLASH_ACR_DBG_SWEN; +} + +/** + * @brief Flash Empty check + * @note This API checks if first location in Flash is programmed or not. + * This check is done once by Option Byte Loader. + * @retval 0 if 1st location is not programmed else + */ +uint32_t HAL_FLASHEx_FlashEmptyCheck(void) +{ + return ((FLASH->ACR & FLASH_ACR_PROGEMPTY)); +} + + +/** + * @brief Force Empty check value. + * @note Allows to modify program empty check value in order to force this + * infrmation in Flash Interface, for all next reset that do not launch + * Option Byte Loader. + * @param FlashEmpty this parameter can be a value of @ref FLASHEx_Empty_Check + * @retval None + */ +void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty) +{ + uint32_t acr; + assert_param(IS_FLASH_EMPTY_CHECK(FlashEmpty)); + + acr = (FLASH->ACR & ~FLASH_ACR_PROGEMPTY); + FLASH->ACR = (acr | FlashEmpty); +} + +/** + * @brief Securable memory area protection enable + * @param Bank Select Bank to be secured. On C0, there is only 1 bank so + * parameter has to be set to 0. + * @note This API locks Securable memory area which is defined in SEC_SIZE option byte + * (that can be retrieved calling HAL_FLASHEx_OBGetConfig API and checking + * Secsize). + * @note SEC_PROT bit can only be set, it will be reset by system reset. + * @retval None + */ +void HAL_FLASHEx_EnableSecMemProtection(uint32_t Bank) +{ + assert_param(IS_FLASH_BANK(Bank)); + FLASH->CR |= FLASH_CR_SEC_PROT; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory. + * @retval None + */ +static void FLASH_MassErase(void) +{ + /* Set the Mass Erase Bit and start bit */ + FLASH->CR |= (FLASH_CR_STRT | FLASH_CR_MER1); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in Flash - 1) + * @retval None + */ +void FLASH_PageErase(uint32_t Page) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_FLASH_PAGE(Page)); + + /* Get configuration register, then clear page number */ + tmp = (FLASH->CR & ~FLASH_CR_PNB); + + /* Set page number, Page Erase bit & Start bit */ + FLASH->CR = (tmp | (FLASH_CR_STRT | (Page << FLASH_CR_PNB_Pos) | FLASH_CR_PER)); +} + +/** + * @brief Flush the instruction cache. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + /* Flush instruction cache */ + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } +} + + +/** + * @brief Configure the write protection of the desired pages. + * @note When WRP is active in a zone, it cannot be erased or programmed. + * Consequently, a software mass erase cannot be performed if one zone + * is write-protected. + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @param WRPArea Specifies the area to be configured. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @param WRPStartOffset Specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the Flash - 1) + * @param WRDPEndOffset Specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the Flash - 1) + * @retval None + */ +static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Configure the write protected area */ + if (WRPArea != OB_WRPAREA_ZONE_A) + { + FLASH->WRP1BR = ((WRDPEndOffset << FLASH_WRP1AR_WRP1A_END_Pos) | WRPStartOffset); + } + else + { + FLASH->WRP1AR = ((WRDPEndOffset << FLASH_WRP1BR_WRP1B_END_Pos) | WRPStartOffset); + } +} + +/** + * @brief Set user & RDP configuration + * @note !!! Warning : When enabling OB_RDP level 2 it is no more possible + * to go back to level 1 or 0 !!! + * @param UserType The FLASH User Option Bytes to be modified. + * This parameter can be a combination of @ref FLASH_OB_USER_Type + * @param UserConfig The FLASH User Option Bytes values. + * This parameter can be a combination of: + * @arg @ref FLASH_OB_USER_BOR_LEVEL, + * @arg @ref FLASH_OB_USER_nRST_STOP, + * @arg @ref FLASH_OB_USER_nRST_STANDBY, + * @arg @ref FLASH_OB_USER_nRST_SHUTDOWN, + * @arg @ref FLASH_OB_USER_IWDG_SW, + * @arg @ref FLASH_OB_USER_IWDG_STOP, + * @arg @ref FLASH_OB_USER_IWDG_STANDBY, + * @arg @ref FLASH_OB_USER_WWDG_SW, + * @arg @ref FLASH_OB_USER_SRAM_PARITY, + * @arg @ref FLASH_OB_USER_nBOOT_SEL, + * @arg @ref FLASH_OB_USER_nBOOT1, + * @arg @ref FLASH_OB_USER_nBOOT0, + * @arg @ref FLASH_OB_USER_INPUT_RESET_HOLDER + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Memory Read protection + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + * @retval None + */ +static void FLASH_OB_OptrConfig(uint32_t UserType, uint32_t UserConfig, uint32_t RDPLevel) +{ + uint32_t optr; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + assert_param(IS_OB_USER_CONFIG(UserType, UserConfig)); + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + optr = FLASH->OPTR; + optr &= ~(UserType | FLASH_OPTR_RDP); + FLASH->OPTR = (optr | UserConfig | RDPLevel); +} + +/** + * @brief Configure the 1A Proprietary code readout protection & erase configuration on RDP regression. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROPConfig specifies the erase configuration (OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE) + * on RDP level 1 regression. + * @param PCROP1AStartAddr Specifies the Zone 1A Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1AEndAddr Specifies the Zone 1A end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1AStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + uint32_t pcrop1aend; + + /* Check the parameters */ + assert_param(IS_OB_PCROP_CONFIG(PCROPConfig)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROP1AStartAddr)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROP1AEndAddr)); + + /* get pcrop 1A end register */ + pcrop1aend = FLASH->PCROP1AER; + + /* Configure the Proprietary code readout protection offset */ + if ((PCROPConfig & OB_PCROP_ZONE_A) != 0x00U) + { + /* Compute offset depending on pcrop granularity */ + startoffset = ((PCROP1AStartAddr - FLASH_BASE) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1AEndAddr - FLASH_BASE) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone A start offset */ + FLASH->PCROP1ASR = startoffset; + + /* Set Zone A end offset */ + pcrop1aend &= ~FLASH_PCROP1AER_PCROP1A_END; + pcrop1aend |= endoffset; + } + + /* Set RDP erase protection if needed. This bit is only set & will be reset by mass erase */ + if ((PCROPConfig & OB_PCROP_RDP_ERASE) != 0x00U) + { + pcrop1aend |= FLASH_PCROP1AER_PCROP_RDP; + } + + /* set 1A End register */ + FLASH->PCROP1AER = pcrop1aend; +} + +/** + * @brief Configure the 1B Proprietary code readout protection. + * @note It is recommended to align PCROP zone with page granularity when using PCROP_RDP or avoid + * having some executable code in a page where PCROP zone starts or ends. + * @note Minimum PCROP area size is 2 times the chosen granularity: PCROPA_STRT and PCROPA_END. + * So if the requirement is to be able to read-protect 1KB areas, the ROP granularity + * has to be set to 512 Bytes + * @param PCROP1BStartAddr Specifies the Zone 1B Start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the flash + * @param PCROP1BEndAddr Specifies the Zone 1B end address of the Proprietary code readout protection + * This parameter can be an address between PCROP1BStartAddr and end of the flash + * @retval None + */ +static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr) +{ + uint32_t startoffset; + uint32_t endoffset; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROP1BStartAddr)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROP1BEndAddr)); + + /* Configure the Proprietary code readout protection offset */ + startoffset = ((PCROP1BStartAddr - FLASH_BASE) >> FLASH_PCROP_GRANULARITY_OFFSET); + endoffset = ((PCROP1BEndAddr - FLASH_BASE) >> FLASH_PCROP_GRANULARITY_OFFSET); + + /* Set Zone B start offset */ + FLASH->PCROP1BSR = startoffset; + /* Set Zone B end offset */ + FLASH->PCROP1BER = endoffset; +} + +/** + * @brief Configure Securable Memory area feature. + * @param BootEntry specifies if boot scheme is forced to Flash (System or user) or not + * This parameter can be one of the following values: + * @arg @ref OB_BOOT_ENTRY_FORCED_NONE No boot entry forced + * @arg @ref OB_BOOT_ENTRY_FORCED_FLASH FLash selected as unique entry boot + * @param SecSize specifies number of pages to protect as securable memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize) +{ + uint32_t secmem; + + /* Check the parameters */ + assert_param(IS_OB_SEC_BOOT_LOCK(BootEntry)); + assert_param(IS_OB_SEC_SIZE(SecSize)); + + /* Set securable memory area configuration */ + secmem = (FLASH->SECR & ~(FLASH_SECR_BOOT_LOCK | FLASH_SECR_SEC_SIZE)); + FLASH->SECR = (secmem | BootEntry | SecSize); +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * @param[in] WRPArea Specifies the area to be returned. + * This parameter can be one of the following values: + * @arg @ref OB_WRPAREA_ZONE_A Flash Zone A + * @arg @ref OB_WRPAREA_ZONE_B Flash Zone B + * @param[out] WRPStartOffset Specifies the address where to copied the start page + * of the write protected area + * @param[out] WRDPEndOffset Dpecifies the address where to copied the end page of + * the write protected area + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t *WRPStartOffset, uint32_t *WRDPEndOffset) +{ + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + + /* Get the configuration of the write protected area */ + if (WRPArea == OB_WRPAREA_ZONE_A) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos); + } + else + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos); + } +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg @ref OB_RDP_LEVEL_0 No protection + * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory + * @arg @ref OB_RDP_LEVEL_2 Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdplvl = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdplvl != OB_RDP_LEVEL_0) && (rdplvl != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdplvl; + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values. It will be a combination of all the following values: + * @ref FLASH_OB_USER_BOR_LEVEL, + * @ref FLASH_OB_USER_nRST_STOP, + * @ref FLASH_OB_USER_nRST_STANDBY, + * @ref FLASH_OB_USER_nRST_SHUTDOWN, + * @ref FLASH_OB_USER_IWDG_SW, + * @ref FLASH_OB_USER_IWDG_STOP, + * @ref FLASH_OB_USER_IWDG_STANDBY, + * @ref FLASH_OB_USER_WWDG_SW, + * @ref FLASH_OB_USER_SRAM_PARITY, + * @ref FLASH_OB_USER_nBOOT_SEL, + * @ref FLASH_OB_USER_nBOOT1, + * @ref FLASH_OB_USER_nBOOT0, + * @ref FLASH_OB_USER_INPUT_RESET_HOLDER + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user = ((FLASH->OPTR & ~FLASH_OPTR_RDP) & OB_USER_ALL); + return user; +} + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROPConfig [out] specifies the configuration of PCROP_RDP option. + * @param PCROP1AStartAddr [out] Specifies the address where to copied the start address + * of the 1A Proprietary code readout protection + * @param PCROP1AEndAddr [out] Specifies the address where to copied the end address of + * the 1A Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr) +{ + uint32_t pcrop; + + pcrop = (FLASH->PCROP1ASR & FLASH_PCROP1ASR_PCROP1A_STRT); + *PCROP1AStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AStartAddr += FLASH_BASE; + + pcrop = FLASH->PCROP1AER; + *PCROP1AEndAddr = ((pcrop & FLASH_PCROP1AER_PCROP1A_END) << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1AEndAddr += (FLASH_BASE + FLASH_PCROP_GRANULARITY - 1U); + + *PCROPConfig &= ~OB_PCROP_RDP_ERASE; + *PCROPConfig |= (pcrop & FLASH_PCROP1AER_PCROP_RDP); +} + + +/** + * @brief Return the FLASH PCROP Protection Option Bytes value. + * @param PCROP1BStartAddr [out] Specifies the address where to copied the start address + * of the 1B Proprietary code readout protection + * @param PCROP1BEndAddr [out] Specifies the address where to copied the end address of + * the 1B Proprietary code readout protection + * @retval None + */ +static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr) +{ + uint32_t pcrop; + + pcrop = (FLASH->PCROP1BSR & FLASH_PCROP1BSR_PCROP1B_STRT); + *PCROP1BStartAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BStartAddr += FLASH_BASE; + + pcrop = (FLASH->PCROP1BER & FLASH_PCROP1BER_PCROP1B_END); + *PCROP1BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET); + *PCROP1BEndAddr += (FLASH_BASE + FLASH_PCROP_GRANULARITY - 1U); +} + +/** + * @brief Return the FLASH Securable memory area protection Option Bytes value. + * @param BootEntry specifies boot scheme configuration + * @param SecSize specifies number of pages to protect as secure memory area, starting from + * beginning of the Flash (page 0). + * @retval None + */ +static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize) +{ + uint32_t secmem = FLASH->SECR; + + *BootEntry = (secmem & FLASH_SECR_BOOT_LOCK); + *SecSize = (secmem & FLASH_SECR_SEC_SIZE); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_gpio.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_gpio.c new file mode 100644 index 0000000000..97d43b512d --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_gpio.c @@ -0,0 +1,557 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 28 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PF0 and PF1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup GPIO_Private_Defines GPIO Private Defines + * @{ + */ +#define GPIO_MODE (0x00000003U) +#define EXTI_MODE (0x10000000U) +#define GPIO_MODE_IT (0x00010000U) +#define GPIO_MODE_EVT (0x00020000U) +#define RISING_EDGE (0x00100000U) +#define FALLING_EDGE (0x00200000U) +#define GPIO_OUTPUT_TYPE (0x00000010U) +#define GPIO_NUMBER (16U) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32C0xx family + * @param pGPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, const GPIO_InitTypeDef *pGPIO_Init) +{ + uint32_t tmp; + uint32_t iocurrent; + uint32_t position = 0U; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(pGPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(pGPIO_Init->Mode)); + + /* Configure the port pins */ + while (((pGPIO_Init->Pin) >> position) != 0U) + { + /* Get current io position */ + iocurrent = (pGPIO_Init->Pin) & (1UL << position); + + if (iocurrent != 0U) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Alternate function mode selection */ + if ((pGPIO_Init->Mode == GPIO_MODE_AF_PP) || (pGPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(pGPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + tmp = GPIOx->AFR[position >> 3U]; + tmp &= ~(0xFUL << ((position & 0x07U) * 4U)) ; + tmp |= ((pGPIO_Init->Alternate & 0x0FUL) << ((position & 0x07U) * 4U)); + GPIOx->AFR[position >> 3U] = tmp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + tmp = GPIOx->MODER; + tmp &= ~(GPIO_MODER_MODE0 << (position * 2U)); + tmp |= ((pGPIO_Init->Mode & GPIO_MODE) << (position * 2U)); + GPIOx->MODER = tmp; + + /* In case of Output or Alternate function mode selection */ + if ((pGPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (pGPIO_Init->Mode == GPIO_MODE_AF_PP) || + (pGPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (pGPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(pGPIO_Init->Speed)); + + /* Configure the IO Speed */ + tmp = GPIOx->OSPEEDR; + tmp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + tmp |= (pGPIO_Init->Speed << (position * 2U)); + GPIOx->OSPEEDR = tmp; + + /* Configure the IO Output Type */ + tmp = GPIOx->OTYPER; + tmp &= ~(GPIO_OTYPER_OT0 << position) ; + tmp |= (((pGPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position); + GPIOx->OTYPER = tmp; + } + + if (pGPIO_Init->Mode != GPIO_MODE_ANALOG) + { + /* Check the Pull parameters */ + assert_param(IS_GPIO_PULL(pGPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + tmp = GPIOx->PUPDR; + tmp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + tmp |= ((pGPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = tmp; + } + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((pGPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) + { + tmp = EXTI->EXTICR[position >> 2U]; + tmp &= ~((0x0FUL) << (8U * (position & 0x03U))); + tmp |= (GPIO_GET_INDEX(GPIOx) << (8U * (position & 0x03U))); + EXTI->EXTICR[position >> 2U] = tmp; + + /* Clear EXTI line configuration */ + tmp = EXTI->IMR1; + tmp &= ~((uint32_t)iocurrent); + if ((pGPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) + { + tmp |= iocurrent; + } + EXTI->IMR1 = tmp; + + tmp = EXTI->EMR1; + tmp &= ~((uint32_t)iocurrent); + if ((pGPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) + { + tmp |= iocurrent; + } + EXTI->EMR1 = tmp; + + /* Clear Rising Falling edge configuration */ + tmp = EXTI->RTSR1; + tmp &= ~((uint32_t)iocurrent); + if ((pGPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) + { + tmp |= iocurrent; + } + EXTI->RTSR1 = tmp; + + tmp = EXTI->FTSR1; + tmp &= ~((uint32_t)iocurrent); + if ((pGPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) + { + tmp |= iocurrent; + } + EXTI->FTSR1 = tmp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32C0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t tmp; + uint32_t iocurrent; + uint32_t position = 0U; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0U) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1UL << position); + + if (iocurrent != 0U) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + tmp = EXTI->EXTICR[position >> 2U]; + tmp &= ((0x0FUL) << (8U * (position & 0x03U))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (8U * (position & 0x03U)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR1 &= ~(iocurrent); + EXTI->FTSR1 &= ~(iocurrent); + + tmp = (0x0FUL) << (8U * (position & 0x03U)); + EXTI->EXTICR[position >> 2U] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2U)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3U] &= ~(0x0FUL << ((position & 0x07U) * 4U)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position); + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32C0xx family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0U) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32C0xx family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx: where x can be (A..I) to select the GPIO peripheral for STM32C0 family + * @param GPIO_Pin: specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32C0xx family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != GPIO_LCKR_LCKK) + { + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_RISING_IT(GPIO_Pin) != 0U) + { + __HAL_GPIO_EXTI_CLEAR_RISING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Rising_Callback(GPIO_Pin); + } + + if (__HAL_GPIO_EXTI_GET_FALLING_IT(GPIO_Pin) != 0U) + { + __HAL_GPIO_EXTI_CLEAR_FALLING_IT(GPIO_Pin); + HAL_GPIO_EXTI_Falling_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Rising_Callback could be implemented in the user file + */ +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Falling_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c.c new file mode 100644 index 0000000000..742a5bc2f9 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c.c @@ -0,0 +1,6884 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) + != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) + != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart; + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c_ex.c new file mode 100644 index 0000000000..bc9cf4c824 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2c_ex.c @@ -0,0 +1,356 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32C0xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2s.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2s.c new file mode 100644 index 0000000000..69515eea16 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_i2s.c @@ -0,0 +1,1857 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_i2s.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream/Channel. + (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream/Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- Make sure that either: + (+@) SYSCLK is selected as I2S1 clock or + (+@) HSIKER clock is selected or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_I2S1_CLOCK_VALUE in the stm32c0xx_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + In Slave mode, if HAL_I2S_DMAStop is used to stop the communication, an error + HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. + In this case __HAL_I2S_FLUSH_RX_DR macro must be used to flush the remaining data + inside DR register and avoid using DeInit/Init process for the next transfer. + + *** I2S HAL driver macros list *** + =================================== + [..] + Below the list of most used macros in I2S HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + (+) __HAL_I2S_FLUSH_RX_DR: Read DR Register to Flush RX Data + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + *** I2S HAL driver macros list *** + =================================== + [..] + Callback registration: + + (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. + + Function HAL_I2S_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + + [..] + By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() + or HAL_I2S_Init() function. + + [..] + When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +#ifdef HAL_I2S_MODULE_ENABLED + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define I2S_TIMEOUT_FLAG 100U /*!< Timeout 100 ms */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv; + uint32_t i2sodd; + uint32_t packetlength; + uint32_t tmp; + uint32_t i2sclk; + + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + + if (hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + /* Init the I2S Callback settings */ + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hi2s->MspInitCallback == NULL) + { + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hi2s->MspInitCallback(hi2s); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); + hi2s->Instance->I2SPR = 0x0002U; + + /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ + /* If the requested audio frequency is not the default, compute the prescaler */ + if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) ********************/ + if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 16U; + } + else + { + /* Packet length is 32 bits */ + packetlength = 32U; + } + + /* I2S standard */ + if (hi2s->Init.Standard <= I2S_STANDARD_LSB) + { + /* In I2S standard packet length is multiplied by 2 */ + packetlength = packetlength * 2U; + } + + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S1); + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + else + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + + /* Remove the flatting point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint32_t)(i2sodd << 8U); + } + else + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); + return HAL_ERROR; + } + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + + /* Write to SPIx I2SPR register the computed value */ + hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); + + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ + hi2s->Init.Standard | hi2s->Init.DataFormat | \ + hi2s->Init.CPOL)); + +#if defined(SPI_I2SCFGR_ASTRTEN) + if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) + { + /* Write to SPIx I2SCFGR */ + SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); + } +#endif /* SPI_I2SCFGR_ASTRTEN */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + if (hi2s->MspDeInitCallback == NULL) + { + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hi2s->MspDeInitCallback(hi2s); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User I2S Callback + * To be used instead of the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = pCallback; + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = pCallback; + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} + +/** + * @brief Unregister an I2S Callback + * I2S callback is redirected to the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + tmpreg_cfgr = hi2s->Instance->I2SCFGR; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + while (hi2s->TxXferCount > 0U) + { + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + /* Check if Slave mode is selected */ + if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) + || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) + { + /* Wait until Busy flag is reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continuous way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Receive data */ + while (hi2s->RxXferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Enable RXNE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Transmit data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set the I2S Tx DMA Half transfer complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfer complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, + (uint32_t)hi2s->pTxBuffPtr, + (uint32_t)&hi2s->Instance->DR, + hi2s->TxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Pauses the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Disable the I2S DMA Tx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Disable the I2S DMA Rx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Enable the I2S DMA Tx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Enable the I2S DMA Rx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* If the I2S peripheral is still not enabled, enable it */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Stops the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + */ + + if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) + { + /* Abort the I2S DMA tx Stream/Channel */ + if (hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA tx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Wait until BSY flag is Reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear UDR flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Disable the I2S Tx DMA requests */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + } + + else if ((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX)) + { + /* Abort the I2S DMA rx Stream/Channel */ + if (hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA rx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear OVR flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Disable the I2S Rx DMA request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + + if (hi2s->Init.Mode == I2S_MODE_SLAVE_RX) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + else + { + /* Read DR to Flush RX Data */ + READ_REG((hi2s->Instance)->DR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + + return errorcode; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t itsource = hi2s->Instance->CR2; + uint32_t itflag = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && + (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occurred ---------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + hi2s->TxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxHalfCpltCallback(hi2s); +#else + HAL_I2S_TxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + hi2s->RxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxHalfCpltCallback(hi2s); +#else + HAL_I2S_RxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S communication error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); + hi2s->TxXferCount = 0U; + hi2s->RxXferCount = 0U; + + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0U) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set to status*/ + while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* HAL_I2S_MODULE_ENABLED */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_irda.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_irda.c new file mode 100644 index 0000000000..9297299dd9 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_irda.c @@ -0,0 +1,3010 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_irda.c + * @author MCD Application Team + * @brief IRDA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the IrDA (Infrared Data Association) Peripheral + * (IRDA) + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The IRDA HAL driver can be used as follows: + + (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda). + (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API + in setting the associated USART or UART in IRDA mode: + (++) Enable the USARTx/UARTx interface clock. + (++) USARTx/UARTx pins configuration: + (+++) Enable the clock for the USARTx/UARTx GPIOs. + (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() + and HAL_IRDA_Receive_IT() APIs): + (+++) Configure the USARTx/UARTx interrupt priority. + (+++) Enable the NVIC USARTx/UARTx IRQ handle. + (+++) The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() + and HAL_IRDA_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter), + the normal or low power mode and the clock prescaler in the hirda handle Init structure. + + (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_IRDA_MspInit() API. + + -@@- The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() + (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA() + (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA() + (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** IRDA HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IRDA HAL driver. + + (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral + (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral + (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not + (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag + (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt + (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt + (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled + + [..] + (@) You can refer to the IRDA HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_IRDA_RegisterCallback() to register a user callback. + Function HAL_IRDA_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + + [..] + By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_IRDA_Init() + and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_IRDA_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_IRDA_RegisterCallback() before calling HAL_IRDA_DeInit() + or HAL_IRDA_Init() function. + + [..] + When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup IRDA IRDA + * @brief HAL IRDA module driver + * @{ + */ + +#ifdef HAL_IRDA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ +#define IRDA_TEACK_REACK_TIMEOUT 1000U /*!< IRDA TX or RX enable acknowledge time-out value */ + +#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \ + | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)) /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ IRDA clock source. + * @param __BAUD__ Baud rate set by the user. + * @param __PRESCALER__ IRDA clock prescaler value. + * @retval Division result + */ +#define IRDA_DIV_SAMPLING16(__PCLK__, __BAUD__, __PRESCALER__) ((((__PCLK__)/IRDAPrescTable[(__PRESCALER__)])\ + + ((__BAUD__)/2U)) / (__BAUD__)) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup IRDA_Private_Functions + * @{ + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda); +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda); +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAError(DMA_HandleTypeDef *hdma); +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + in asynchronous IRDA mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Power mode + (++) Prescaler setting + (++) Receiver/transmitter modes + + [..] + The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible IRDA frame formats are listed in the + following table. + + Table 1. IRDA frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | IRDA frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the IRDA mode according to the specified + * parameters in the IRDA_InitTypeDef and initialize the associated handle. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + if (hirda->gState == HAL_IRDA_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hirda->Lock = HAL_UNLOCKED; + +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + IRDA_InitCallbacksToDefault(hirda); + + if (hirda->MspInitCallback == NULL) + { + hirda->MspInitCallback = HAL_IRDA_MspInit; + } + + /* Init the low level hardware */ + hirda->MspInitCallback(hirda); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_IRDA_MspInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* Disable the Peripheral to update the configuration registers */ + __HAL_IRDA_DISABLE(hirda); + + /* Set the IRDA Communication parameters */ + if (IRDA_SetConfig(hirda) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* set the UART/USART in IRDA mode */ + hirda->Instance->CR3 |= USART_CR3_IREN; + + /* Enable the Peripheral */ + __HAL_IRDA_ENABLE(hirda); + + /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */ + return (IRDA_CheckIdleState(hirda)); +} + +/** + * @brief DeInitialize the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* DeInit the low level hardware */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + if (hirda->MspDeInitCallback == NULL) + { + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + } + /* DeInit the low level hardware */ + hirda->MspDeInitCallback(hirda); +#else + HAL_IRDA_MspDeInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + /* Disable the Peripheral */ + __HAL_IRDA_DISABLE(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_RESET; + hirda->RxState = HAL_IRDA_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Initialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User IRDA Callback + * To be used instead of the weak predefined callback + * @param hirda irda handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_READY) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = pCallback; + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = pCallback; + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hirda->gState == HAL_IRDA_STATE_RESET) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hirda); + + return status; +} + +/** + * @brief Unregister an IRDA callback + * IRDA callback is redirected to the weak predefined callback + * @param hirda irda handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hirda); + + if (HAL_IRDA_STATE_READY == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_IRDA_STATE_RESET == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hirda); + + return status; +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions + * @brief IRDA Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the IRDA data transfers. + + [..] + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + [..] + (#) There are two modes of transfer: + (++) Blocking mode: the communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: the communication is performed using Interrupts + or DMA, these API's return the HAL status. + The end of the data processing will be indicated through the + dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected + + (#) Blocking mode APIs are : + (++) HAL_IRDA_Transmit() + (++) HAL_IRDA_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_IRDA_Transmit_IT() + (++) HAL_IRDA_Receive_IT() + (++) HAL_IRDA_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_IRDA_Transmit_DMA() + (++) HAL_IRDA_Receive_DMA() + (++) HAL_IRDA_DMAPause() + (++) HAL_IRDA_DMAResume() + (++) HAL_IRDA_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode: + (++) HAL_IRDA_TxHalfCpltCallback() + (++) HAL_IRDA_TxCpltCallback() + (++) HAL_IRDA_RxHalfCpltCallback() + (++) HAL_IRDA_RxCpltCallback() + (++) HAL_IRDA_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_IRDA_Abort() + (++) HAL_IRDA_AbortTransmit() + (++) HAL_IRDA_AbortReceive() + (++) HAL_IRDA_Abort_IT() + (++) HAL_IRDA_AbortTransmit_IT() + (++) HAL_IRDA_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_IRDA_AbortCpltCallback() + (++) HAL_IRDA_AbortTransmitCpltCallback() + (++) HAL_IRDA_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. + Transfer is kept ongoing on IRDA side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and + HAL_IRDA_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (hirda->TxXferCount > 0U) + { + hirda->TxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + hirda->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + hirda->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + } + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + uhMask = hirda->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Check data remaining to be received */ + while (hirda->RxXferCount > 0U) + { + hirda->RxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(hirda->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + } + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Transmit Data Register Empty Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to the RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the IRDA Parity Error and Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + /* Enable the IRDA Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmatx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmatx->XferAbortCallback = NULL; + + /* Enable the IRDA transmit DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->gState to ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @note When the IRDA parity is enabled (PCE = 1), the received data contains + * the parity bit (MSB position). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmarx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the UART Parity Error Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->RxState to ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Pause the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the IRDA DMA Tx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + /* Enable the IRDA DMA Tx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the IRDA DMA Rx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() / + HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel */ + if (hirda->hdmatx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndRxTransfer(hirda); + } + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hirda->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback; + } + else + { + hirda->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hirda->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback; + } + else + { + hirda->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* IRDA Tx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + hirda->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* IRDA Rx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + hirda->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */ + hirda->hdmatx->XferAbortCallback(hirda->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle IRDA interrupt request. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) +{ + uint32_t isrflags = READ_REG(hirda->Instance->ISR); + uint32_t cr1its = READ_REG(hirda->Instance->CR1); + uint32_t cr3its; + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + if (errorflags == 0U) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + return; + } + } + + /* If some errors occur */ + cr3its = READ_REG(hirda->Instance->CR3); + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* IRDA parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_PE; + } + + /* IRDA frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_FE; + } + + /* IRDA noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_NE; + } + + /* IRDA Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) && + (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; + } + + /* Call IRDA Error Call back function if need be --------------------------*/ + if (hirda->ErrorCode != HAL_IRDA_ERROR_NONE) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = hirda->ErrorCode; + if ((HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & HAL_IRDA_ERROR_ORE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the IRDA state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + IRDA_EndRxTransfer(hirda); + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* IRDA in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) && ((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U)) + { + IRDA_Transmit_IT(hirda); + return; + } + + /* IRDA in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + IRDA_EndTransmit_IT(hirda); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA error callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Receive Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @brief IRDA State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of IrDA + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state + of the IRDA peripheral handle. + (+) HAL_IRDA_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the IRDA handle state. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL state + */ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda) +{ + /* Return IRDA handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hirda->gState; + temp2 = (uint32_t)hirda->RxState; + + return (HAL_IRDA_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the IRDA handle error code. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval IRDA Error Code + */ +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda) +{ + return hirda->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hirda IRDA handle. + * @retval none + */ +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda) +{ + /* Init the IRDA Callback settings */ + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @brief Configure the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) +{ + uint32_t tmpreg; + IRDA_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the communication parameters */ + assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); + assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); + assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); + assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode)); + assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); + assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); + assert_param(IS_IRDA_CLOCKPRESCALER(hirda->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the IRDA Word Length, Parity and transfer Mode: + Set the M bits according to hirda->Init.WordLength value + Set PCE and PS bits according to hirda->Init.Parity value + Set TE and RE bits according to hirda->Init.Mode value */ + tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ; + + MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode); + + /*--------------------- USART clock PRESC Configuration ----------------*/ + /* Configure + * - IRDA Clock Prescaler: set PRESCALER according to hirda->Init.ClockPrescaler value */ + MODIFY_REG(hirda->Instance->PRESC, USART_PRESC_PRESCALER, hirda->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + IRDA_GETCLOCKSOURCE(hirda, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case IRDA_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_HSI: + pclk = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + case IRDA_CLOCKSOURCE_LSE: + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16((uint32_t)LSE_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hirda->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + return ret; +} + +/** + * @brief Check the IRDA Idle State. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda) +{ + uint32_t tickstart; + + /* Initialize the IRDA ErrorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the IRDA state*/ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Handle IRDA Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param Flag Specifies the IRDA flag to check. + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; +} + + +/** + * @brief DMA IRDA transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + +} + +/** + * @brief DMA IRDA transmit process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half complete callback */ + hirda->TxHalfCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + } + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA IRDA receive process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + hirda->RxHalfCpltCallback(hirda); +#else + /* Call legacy weak Rx Half complete callback */ + HAL_IRDA_RxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->TxXferCount = 0U; + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->RxXferCount = 0U; + IRDA_EndRxTransfer(hirda); + } + } + + hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + hirda->RxXferCount = 0U; + hirda->TxXferCount = 0U; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmarx != NULL) + { + if (hirda->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmatx != NULL) + { + if (hirda->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Transmit_IT(). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (hirda->TxXferCount == 0U) + { + /* Disable the IRDA Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + else + { + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (const uint16_t *) hirda->pTxBuffPtr; /* Derogation R.11.3 */ + hirda->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + hirda->pTxBuffPtr += 2U; + } + else + { + hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr & 0xFFU); + hirda->pTxBuffPtr++; + } + hirda->TxXferCount--; + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable the IRDA Transmit Complete Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Receive_IT() + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t *tmp; + uint16_t uhMask = hirda->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(hirda->Instance->RDR); + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (uint16_t *) hirda->pRxBuffPtr; /* Derogation R.11.3 */ + *tmp = (uint16_t)(uhdata & uhMask); + hirda->pRxBuffPtr += 2U; + } + else + { + *hirda->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + hirda->pRxBuffPtr++; + } + + hirda->RxXferCount--; + if (hirda->RxXferCount == 0U) + { + /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_IRDA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_iwdg.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_iwdg.c new file mode 100644 index 0000000000..5d60ed8373 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_iwdg.c @@ -0,0 +1,283 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_iwdg.c + * @author MCD Application Team + * @brief IWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Independent Watchdog (IWDG) peripheral: + * + Initialization and Start functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### IWDG Generic features ##### + ============================================================================== + [..] + (+) The IWDG can be started by either software or hardware (configurable + through option byte). + + (+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays + active even if the main clock fails. + + (+) Once the IWDG is started, the LSI is forced ON and both cannot be + disabled. The counter starts counting down from the reset value (0xFFF). + When it reaches the end of count value (0x000) a reset signal is + generated (IWDG reset). + + (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register, + the IWDG_RLR value is reloaded into the counter and the watchdog reset + is prevented. + + (+) The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY). + IWDGRST flag in RCC_CSR register can be used to inform when an IWDG + reset occurs. + + (+) Debug mode: When the microcontroller enters debug mode (core halted), + the IWDG counter either continues to work normally or stops, depending + on DBG_IWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros. + + [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s + The IWDG timeout may vary due to LSI clock frequency dispersion. + STM32C0xx devices provide the capability to measure the LSI clock + frequency (LSI clock is internally connected to TIM16 CH1 input capture). + The measured value can be used to have an IWDG timeout with an + acceptable accuracy. + + [..] Default timeout value (necessary for IWDG_SR status register update): + Constant LSI_VALUE is defined based on the nominal LSI clock frequency. + This frequency being subject to variations as mentioned above, the + default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT + below) may become too short or too long. + In such cases, this default timeout value can be tuned by redefining + the constant LSI_VALUE at user-application level (based, for instance, + on the measured LSI clock frequency as explained above). + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Use IWDG using HAL_IWDG_Init() function to : + (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI + clock is forced ON and IWDG counter starts counting down. + (++) Enable write access to configuration registers: + IWDG_PR, IWDG_RLR and IWDG_WINR. + (++) Configure the IWDG prescaler and counter reload value. This reload + value will be loaded in the IWDG counter each time the watchdog is + reloaded, then the IWDG will start counting down from this value. + (++) Depending on window parameter: + (+++) If Window Init parameter is same as Window register value, + nothing more is done but reload counter value in order to exit + function with exact time base. + (+++) Else modify Window register. This will automatically reload + watchdog counter. + (++) Wait for status flags to be reset. + + (#) Then the application program must refresh the IWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_IWDG_Refresh() function. + + *** IWDG HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IWDG HAL driver: + (+) __HAL_IWDG_START: Enable the IWDG peripheral + (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in + the reload register + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_IWDG_MODULE_ENABLED +/** @addtogroup IWDG + * @brief IWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Defines IWDG Private Defines + * @{ + */ +/* Status register needs up to 5 LSI clock periods divided by the clock + prescaler to be updated. The number of LSI clock periods is upper-rounded to + 6 for the timeout value calculation. + The timeout value is calculated using the highest prescaler (256) and + the LSI_VALUE constant. The value of this constant can be changed by the user + to take into account possible LSI clock period variations. + The timeout value is multiplied by 1000 to be converted in milliseconds. + LSI startup time is also considered here by adding LSI_STARTUP_TIMEOUT + converted in milliseconds. */ +#define HAL_IWDG_DEFAULT_TIMEOUT (((6UL * 256UL * 1000UL) / LSI_VALUE) + ((LSI_STARTUP_TIME / 1000UL) + 1UL)) +#define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_WVU | IWDG_SR_RVU | IWDG_SR_PVU) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IWDG_Exported_Functions + * @{ + */ + +/** @addtogroup IWDG_Exported_Functions_Group1 + * @brief Initialization and Start functions. + * +@verbatim + =============================================================================== + ##### Initialization and Start functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the IWDG according to the specified parameters in the + IWDG_InitTypeDef of associated handle. + (+) Manage Window option. + (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog + is reloaded in order to exit function with correct time base. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the IWDG according to the specified parameters in the + * IWDG_InitTypeDef and start watchdog. Before exiting function, + * watchdog is refreshed in order to have correct time base. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) +{ + uint32_t tickstart; + + /* Check the IWDG handle allocation */ + if (hiwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); + assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); + assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); + assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window)); + + /* Enable IWDG. LSI is turned on automatically */ + __HAL_IWDG_START(hiwdg); + + /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing + 0x5555 in KR */ + IWDG_ENABLE_WRITE_ACCESS(hiwdg); + + /* Write to IWDG registers the Prescaler & Reload values to work with */ + hiwdg->Instance->PR = hiwdg->Init.Prescaler; + hiwdg->Instance->RLR = hiwdg->Init.Reload; + + /* Check pending flag, if previous update not done, return timeout */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT) + { + if ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + return HAL_TIMEOUT; + } + } + } + + /* If window parameter is different than current value, modify window + register */ + if (hiwdg->Instance->WINR != hiwdg->Init.Window) + { + /* Write to IWDG WINR the IWDG_Window value to compare with. In any case, + even if window feature is disabled, Watchdog will be reloaded by writing + windows register */ + hiwdg->Instance->WINR = hiwdg->Init.Window; + } + else + { + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + + +/** @addtogroup IWDG_Exported_Functions_Group2 + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Refresh the IWDG. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the IWDG. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) +{ + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_IWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_msp_template.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_msp_template.c new file mode 100644 index 0000000000..43599b5046 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_msp_template.c @@ -0,0 +1,107 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_msp_template.c + * @author MCD Application Team + * @brief HAL MSP module. + * This file template is located in the HAL folder and should be copied + * to the user folder. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_MSP HAL MSP module driver + * @brief HAL MSP module. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_MSP_Private_Functions + * @{ + */ + +/** + * @brief Initialize the Global MSP. + * @retval None + */ +void HAL_MspInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief DeInitialize the Global MSP. + * @retval None + */ +void HAL_MspDeInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief Initialize the PPP MSP. + * @retval None + */ +void HAL_PPP_MspInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @brief DeInitialize the PPP MSP. + * @retval None + */ +void HAL_PPP_MspDeInit(void) +{ + /* NOTE : This function is generated automatically by STM32CubeMX and eventually + modified by the user + */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr.c new file mode 100644 index 0000000000..272c61a7d4 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr.c @@ -0,0 +1,433 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or + Shutdown mode. WakeUp pins polarity can be set to configure event + detection on high level (rising edge) or low level (falling edge). + + *** Low Power mode configuration *** + ===================================== + [..] + The devices feature 4 low-power modes: + (+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running, + regulator is main mode. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, regulator is + main mode. + (+) Standby mode: all clocks are stopped except LSI and LSE, regulator is + disable. + (+) Shutdown mode: all clocks are stopped except LSE, regulator is + disable. + + + *** Sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep is entered through HAL_PWR_EnterSLEEPMode() API specifying + the main regulator per default and if exit is interrupt or event + triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_SLEEPENTRY_WFI: Core enters sleep mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: Core enters sleep mode with WFE instruction + (+) WFI Exit: + (++) Any interrupt enabled in nested vectored interrupt controller (NVIC) + (+) WFE Exit: + (++) Any wakeup event if cortex is configured with SEVONPEND = 0 + (++) Interrupt even when disabled in NVIC if cortex is configured with + SEVONPEND = 1 + + *** Stop 0 mode *** + ============================= + [..] + (+) Entry: + The Stop modes are entered through the following APIs: + (++) HAL_PWR_EnterSTOPMode() with following settings: + (+++) PWR_MAINREGULATOR_ON to enter STOP0 mode. + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + (+) WFI Exit: + (++) Any EXTI line (internal or external) configured in interrupt mode + with corresponding interrupt enable in NVIC + (+) WFE Exit: + (++) Any EXTI line (internal or external) configured in event mode if + cortex is configured with SEVONPEND = 0 + (++) Any EXTI line configured in interrupt mode (even if the + corresponding EXTI Interrupt vector is disabled in the NVIC) if + cortex is configured with SEVONPEND = 0. The interrupt source can + be external interrupts or peripherals with wakeup capability. + + *** Standby mode *** + ==================== + [..] + (+) Entry: + (++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API, by + setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (alarm, timestamp), + LSE CSS detection, reset on NRST pin, IWDG reset & BOR reset. + [..] Exiting Standby generates a power reset: Cortex is reset and execute + Reset handler vector, all registers in the Vcore domain are set to + their reset value. Registers outside the VCORE domain (RTC, WKUP, IWDG, + and Standby/Shutdown modes control) are not impacted. + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is + cleared. SRAM and registers contents are lost except for backup domain + registers. + (+) Entry: + (++) The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API, + by setting SLEEPDEEP in Cortex control register. + (+) Exit: + (++) WKUP pin edge detection, RTC event (alarm, timestamp), + LSE CSS detection, reset on NRST pin. + [..] Exiting Shutdown generates a brown out reset: Cortex is reset and execute + Reset handler vector, all registers are set to their reset value but ones + in backup domain. + +@endverbatim + * @{ + */ + + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set + * the default polarity i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN4, + * PWR_WAKEUP_PIN6 + * or one of the following value where the user can explicitly specify + * the enabled pin and the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR4_WP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); +} + + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN4, + * PWR_WAKEUP_PIN6 + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as + * in Run mode. + * @param Regulator Specifies the regulator state in Sleep mode. + * This parameter can be the following value: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @param SLEEPEntry Specifies if Sleep mode is entered with WFI or WFE + * instruction. This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep + * mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep + * mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not + * desired as the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if (SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with + * legacy code running on devices where only "Stop mode" is mentioned + * with main regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the HSI and the + * HSE oscillators are disabled. Some peripherals with the wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. + * SRAM and register contents are preserved. + * @note When exiting Stop 0 mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock + * @param Regulator Specifies the regulator state in Stop mode + * This parameter can be of the following value: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @param STOPEntry Specifies Stop 0 mode is entered with WFI or + * WFE instruction. This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 mode with WFI + * instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 mode with WFE + * instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STOP0); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Standby mode. + * @note In Standby mode,the HSI and the HSE oscillators are + * switched off. SRAM and register contents are lost except + * for registers in the Backup domain and Standby circuitry. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif /* __CC_ARM */ + + /* Request Wait For Interrupt */ + __WFI(); +} + + +/** + * @brief Enable Sleep-On-Exit Cortex feature + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over returning to thread mode. Setting this bit is + * useful when the processor is expected to run only on interruptions + * handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit Cortex feature + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor enters SLEEP or DEEPSLEEP mode when an interruption + * handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Enable Cortex Sev On Pending feature. + * @note Set SEVONPEND bit of SCR register. When this bit is set, enabled + * events and all interrupts, including disabled ones can wakeup + * processor from WFE. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable Cortex Sev On Pending feature. + * @note Clear SEVONPEND bit of SCR register. When this bit is clear, only + * enable interrupts or events can wakeup processor from WFE + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr_ex.c new file mode 100644 index 0000000000..d46204db49 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr_ex.c @@ -0,0 +1,492 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_Gpio_Pin_Number PWREx Gpio Pin Number + * @{ + */ +#define PWR_GPIO_PIN_NB 16u /*!< Number of gpio pin in bank */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); +} + + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bit of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, GPIONumber); + CLEAR_BIT(PWR->PDCRA, GPIONumber); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined (STM32C031xx) + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif /* STM32C031xx */ + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bit of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, GPIONumber); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined (STM32C031xx) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif /* STM32C031xx */ + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bit of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, GPIONumber); + CLEAR_BIT(PWR->PUCRA, GPIONumber); + break; + + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, GPIONumber); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined (STM32C031xx) + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif /* STM32C031xx */ + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bit of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_F + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for ports where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, GPIONumber); + break; + + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined (STM32C031xx) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif /* STM32C031xx */ + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() APIs ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + + +/** + * @brief Enable Flash Power Down. + * @note This API allows to enable flash power down capabilities in sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_SLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 |= PowerMode; +} + + +/** + * @brief Disable Flash Power Down. + * @note This API allows to disable flash power down capabilities in sleep and stop modes. + * @param PowerMode this can be a combination of following values: + * @arg @ref PWR_FLASHPD_SLEEP + * @arg @ref PWR_FLASHPD_STOP + * @retval None + */ +void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode) +{ + assert_param(IS_PWR_FLASH_POWERDOWN(PowerMode)); + + PWR->CR1 &= ~PowerMode; +} + + +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can + * be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() + * respectively enable Pull Up and PullDown state. + * HAL_PWREx_DisableGPIOPullUp() & HAL_PWREx_DisableGPIOPullDown() + * disable the same. These states are effective in Standby mode only if + * APC bit is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_LOWPOWERMODE_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif /* __CC_ARM */ + + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group2 Extended PWR Backup register functions + * @brief Extended PWR Backup register functions + * +@verbatim + =============================================================================== + ##### Extended PWR Backup register functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Write a data in a specified PWR Backup data register + (+) Read a data in a specified PWR Backup data register +@endverbatim + * @{ + */ + + +/** + * @brief Write a data in a specified PWR Backup data register. + * @param BackupRegister PWR Backup data Register number. + * This parameter can be PWR_BKP_DRx where x can be from 0 to PWR_BACKUP_NB + * @param Data Data to be written in the specified Backup data register. + * @retval None + */ +void HAL_PWREx_BKUPWrite(uint32_t BackupRegister, uint16_t Data) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_PWR_BKP(BackupRegister)); + + tmp = (uint32_t) &(PWR->BKPREG1); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint16_t)Data; +} + + +/** + * @brief Reads data from the specified PWR Backup data Register. + * @param BackupRegister PWR Backup data Register number. + * This parameter can be PWR_BKP_DRx where x can be from 0 to PWR_BACKUP_NB + * @retval Read value + */ +uint32_t HAL_PWREx_BKUPRead(uint32_t BackupRegister) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_PWR_BKP(BackupRegister)); + + tmp = (uint32_t) &(PWR->BKPREG1); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc.c new file mode 100644 index 0000000000..fda1d10cbd --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc.c @@ -0,0 +1,1134 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from High Speed Internal oscillator + divided by 4 that is the default system clock with Flash 0 wait state. + + (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses: + all peripherals mapped on these busses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB busses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (RTC, ADC, USART, I2C, I2S) + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define RCC_GET_MCO_GPIO_PIN(__RCC_MCOx__) ((__RCC_MCOx__) & GPIO_PIN_MASK) + +#define RCC_GET_MCO_GPIO_AF(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOAF_MASK) >> RCC_MCO_GPIOAF_POS) + +#define RCC_GET_MCO_GPIO_INDEX(__RCC_MCOx__) (((__RCC_MCOx__) & RCC_MCO_GPIOPORT_MASK) >> RCC_MCO_GPIOPORT_POS) + +#define RCC_GET_MCO_GPIO_PORT(__RCC_MCOx__) (IOPORT_BASE + ((0x00000400UL) * RCC_GET_MCO_GPIO_INDEX((__RCC_MCOx__)))) + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, LSI, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB) + + [..] Internal/external clock + (+) HSI (high-speed internal): 48 MHz factory-trimmed RC used directly as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) CSS (Clock security system): once enabled, if a HSE or LSE clock failure occurs, + the System clock is automatically switched respectively to HSI or LSI and an interrupt + is generated if enabled. The interrupt is linked to the Cortex-M0+ NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCOx (microcontroller clock output): used to output LSI, HSI, LSE, HSE and SYSCLK on different pins. + + [..] System, AHB and APB busses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): HSI, + HSE, LSI and LSE. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...).and APB (PCLK1) clock is derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these busses. You can use + "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use @ref __HAL_RCC_RTC_ENABLE() and @ref HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + + (+@) ADC: the ADC clock can be derived either from system clock or HSI + + (+@) USART: the USART clock can be derived either from APB clock or HSI or LSE + (+@) I2C: the I2C clock can be derived either from system clock or HSI + + (+@) I2S: the I2S clock can be derived either from system clock or HSI or external clock source + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK is 48 MHz. + + @endverbatim + + (++) Table 1. HCLK clock frequency. + (++) +------------------------------------+ + (++) | Latency | HCLK clock | + (++) | | frequency (MHz) | + (++) | |------------------| + (++) | | voltage range | + (++) | | VDD33 2V - 3.6V | + (++) | | VDD12 1V - 1.32V| + (++) |-----------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | + (++) |-----------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | + (++) +------------------------------------+ + (++) + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE OFF + * - AHB and APB prescaler set to 1. + * - CSS, MCO1, MCO2 OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Set HSION bit to the reset value */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + RCC->ICSCR = RCC_ICSCR_HSITRIM_6; + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Reset CFGR register (HSI is selected as system clock source) */ + RCC->CFGR = 0x00000000u; + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Clear CR register in 2 steps: first to clear HSEON in case bypass was enabled */ + RCC->CR &= ~RCC_CR_HSEON; + + /* Wait till HSEON is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Then again to HSEBYP in case bypass was enabled */ + RCC->CR &= ~RCC_CR_HSEBYP; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000u; + + /* Clear all flags */ + RCC->CICR = 0xFFFFFFFFu; + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * @ref RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then to HSE On or HSE Bypass. + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then to LSE On or LSE Bypass. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp_sysclksrc; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + + /* When the HSE is used as system clock in these cases it is not allowed to be disabled */ + if (temp_sysclksrc == RCC_CFGR_SWS_HSE) + { + if ((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + assert_param(IS_RCC_HSIDIV(RCC_OscInitStruct->HSIDiv)); + + /* Check if HSI48 is used as system clock */ + temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + + if (temp_sysclksrc == RCC_CFGR_SWS_HSI) + { + /* When HSI is used as system clock it can not be disabled */ + if ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + + if (temp_sysclksrc == RCC_CFGR_SWS_HSI) + { + /* Adjust the HSI48 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Update the SystemCoreClock global variable with HSISYS value */ + SystemCoreClock = (HSI_VALUE / (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos))); + } + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + } + } + else + { + /* Check the HSI State */ + if (RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Configure the HSI48 division factor */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIDiv); + + /* Enable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI48). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check if LSI is used as system clock */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_LSI) + { + /* When LSI is used as system clock it will not be disabled */ + if ((((RCC->CSR2) & RCC_CSR2_LSIRDY) != 0U) && (RCC_OscInitStruct->LSIState == RCC_LSI_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (READ_BIT(RCC->CSR2, RCC_CSR2_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (READ_BIT(RCC->CSR2, RCC_CSR2_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* When the LSE is used as system clock, it is not allowed disable it */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_LSE) + { + if ((((RCC->CSR1) & RCC_CSR1_LSERDY) != 0U) && (RCC_OscInitStruct->LSEState == RCC_LSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Update LSE configuration in RTC Domain control register */ + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->CSR1, RCC_CSR1_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (READ_BIT(RCC->CSR1, RCC_CSR1_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB busses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The HSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the HSI frequency is set to 12 Mhz, as HSI divider is set to 4. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note The LSI can be selected as system clock source after + * in case of failure of the LSE used directly or indirectly + * as system clock (if the Clock Security System LSECSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the FLASH clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + /* Set the highest APB divider in order to ensure that we do not go through + a non-spec phase whatever we decrease or increase HCLK. */ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_HCLK_DIV16); + } + + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLK(RCC_ClkInitStruct->SYSCLKDivider)); + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + MODIFY_REG(RCC->CR, RCC_CR_SYSDIV, RCC_ClkInitStruct->SYSCLKDivider); + + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + /* Check the HSI ready flag */ + if (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_LSI) + { + /* Check the LSI ready flag */ + if (READ_BIT(RCC->CSR2, RCC_CSR2_LSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* LSE is selected as System Clock Source */ + else + { + /* Check the LSE ready flag */ + if (READ_BIT(RCC->CSR1, RCC_CSR1_LSERDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by polling the FLASH_ACR register */ + tickstart = HAL_GetTick(); + + while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = (HAL_RCC_GetSysClockFreq() >> ((AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) & 0x1FU)); + + /* Configure the source of time base considering new system clocks settings*/ + return HAL_InitTick(uwTickPrio); +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCOx pin. + * @note PA8 for MCO1 and PB2 for MCO2 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pins. + * @arg @ref RCC_MCO2 Clock source to output on MCO2 pins. + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO1 output disabled, no clock on MCO1 + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO1 sourcee + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO1 source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO1 source + * @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled, no clock on MCO2 + * @arg @ref RCC_MCO2SOURCE_SYSCLK system clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSI HSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_HSE HSE clock selected as MCO2 sourcee + * @arg @ref RCC_MCO2SOURCE_LSI LSI clock selected as MCO2 source + * @arg @ref RCC_MCO2SOURCE_LSE LSE clock selected as MCO2 source + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock + * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef gpio_initstruct; + uint32_t mcoindex; + uint32_t mco_gpio_index; + GPIO_TypeDef *mco_gpio_port; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + + /* Common GPIO init parameters */ + gpio_initstruct.Mode = GPIO_MODE_AF_PP; + gpio_initstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + gpio_initstruct.Pull = GPIO_NOPULL; + + /* Get MCOx selection */ + mcoindex = RCC_MCOx & RCC_MCO_INDEX_MASK; + + /* Get MCOx GPIO Port */ + mco_gpio_port = (GPIO_TypeDef *) RCC_GET_MCO_GPIO_PORT(RCC_MCOx); + + /* MCOx Clock Enable */ + mco_gpio_index = RCC_GET_MCO_GPIO_INDEX(RCC_MCOx); + SET_BIT(RCC->IOPENR, (1UL << mco_gpio_index)); + + /* Configure the MCOx pin in alternate function mode */ + gpio_initstruct.Pin = RCC_GET_MCO_GPIO_PIN(RCC_MCOx); + gpio_initstruct.Alternate = RCC_GET_MCO_GPIO_AF(RCC_MCOx); + HAL_GPIO_Init(mco_gpio_port, &gpio_initstruct); + + if (mcoindex == RCC_MCO1_INDEX) + { + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + LL_RCC_ConfigMCO(RCC_MCOSource, RCC_MCODiv); + } + else if (mcoindex == RCC_MCO2_INDEX) + { + assert_param(IS_RCC_MCO2DIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + LL_RCC_ConfigMCO2(RCC_MCOSource, RCC_MCODiv); + } + else + {} +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE/HSIDIV(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is LSI, function returns values based on LSI_VALUE(***) + * @note If SYSCLK source is LSE, function returns values based on LSE_VALUE(****) + * @note (*) HSI_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note (***) LSE_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 32768 Hz). + * @note (****) LSI_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 32000 Hz). + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t hsidiv; + uint32_t sysclockfreq; + + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) + { + /* HSISYS can be derived for HSI48 */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + + /* HSI used as system clock source */ + sysclockfreq = (HSI_VALUE / hsidiv); + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_LSE) + { + /* LSE used as system clock source */ + sysclockfreq = LSE_VALUE; + } + else if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_LSI) + { + /* LSI used as system clock source */ + sysclockfreq = LSI_VALUE; + } + else + { + sysclockfreq = 0U; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> ((APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE) >> RCC_CFGR_PPRE_Pos]) & 0x1FU)); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; + + /* Get the HSE configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = ((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); + RCC_OscInitStruct->HSIDiv = ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos); + + /* Get the LSE configuration -----------------------------------------------*/ + if ((RCC->CSR1 & RCC_CSR1_LSEBYP) == RCC_CSR1_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->CSR1 & RCC_CSR1_LSEON) == RCC_CSR1_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR2 & RCC_CSR2_LSION) == RCC_CSR2_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct Pointer to a @ref RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE); + + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Enable the LSE Clock Security System. + * @note If a failure is detected on the LSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M0+ NMI (Non-Maskable Interrupt) exception vector. + * @note The LSE Clock Security System Detection bit (LSECSSD in CSR1) can only be + * cleared by a backup domain reset. + * @retval None + */ +void HAL_RCC_EnableLSECSS(void) +{ + SET_BIT(RCC->CSR1, RCC_CSR1_LSECSSON) ; +} + +/** + * @brief Disable the LSE Clock Security System. + * @note After LSE failure detection, the software must disable LSECSSON + * @note The Clock Security System can only be cleared by reset otherwise. + * @retval None + */ +void HAL_RCC_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSECSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + uint32_t itflag = RCC->CIFR; + + /* Clear interrupt flags related to CSS */ + RCC->CICR = (itflag & (RCC_CIFR_CSSF | RCC_CIFR_LSECSSF)); + + /* Check RCC CSSF interrupt flag */ + if ((itflag & RCC_CIFR_CSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + } + + /* Check RCC LSECSSF interrupt flag */ + if ((itflag & RCC_CIFR_LSECSSF) != 0x00u) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_LSECSSCallback(); + } +} + +/** + * @brief Handle the RCC HSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief RCC LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_LSECSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_LSECSSCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc_ex.c new file mode 100644 index 0000000000..4e81dd8503 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rcc_ex.c @@ -0,0 +1,486 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; as consequence RTC registers and RCC_CSR1 register are + set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the @ref RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to a @ref RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to RTC domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + /*-------------------------- RTC clock source configuration ----------------------*/ + if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if (__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + + /* Reset the RTC domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->CSR1, RCC_CSR1_RTCSEL); + + /* Reset the RTC domain only if the RTC Clock source selection is modified */ + if ((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of CSR1 register before the reset of RTC Domain */ + tmpregister = READ_BIT(RCC->CSR1, ~(RCC_CSR1_RTCSEL)); + /* RTC Clock selection can be changed only if the RTC Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of CSR1 register */ + RCC->CSR1 = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to RTC Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_CSR1_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (READ_BIT(RCC->CSR1, RCC_CSR1_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if (pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + + /*-------------------------- ADC clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + + } + + /*-------------------------- I2S1 clock source configuration ---------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2S1CLKSOURCE(PeriphClkInit->I2s1ClockSelection)); + + /* Configure the I2S1 clock source */ + __HAL_RCC_I2S1_CONFIG(PeriphClkInit->I2s1ClockSelection); + } + /*------------------------------------ HSI Kernel clock source configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HSIKER) == RCC_PERIPHCLK_HSIKER) + { + /* Check the parameters */ + assert_param(IS_RCC_HSIKERDIV(PeriphClkInit->HSIKerClockDivider)); + + /* Configure the HSI Kernel clock source Divider */ + __HAL_RCC_HSIKER_CONFIG(PeriphClkInit->HSIKerClockDivider); + } + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks: I2C1, I2S1, USART1, RTC, ADC, + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2S1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_HSIKER ; + + + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + + /* Get the ADC clock source -----------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + + /* Get the I2S1 clock source -----------------------------------------------*/ + PeriphClkInit->I2s1ClockSelection = __HAL_RCC_GET_I2S1_SOURCE(); + + /* Get the HSI Kernel clock divider -----------------------------------------------*/ + PeriphClkInit->HSIKerClockDivider = __HAL_RCC_GET_HSIKER_DIVIDER(); +} + +/** + * @brief Return the peripheral clock frequency for peripherals + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S1 I2S1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if (PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + /* Check if LSE is ready and if RTC clock selection is LSE */ + if ((HAL_IS_BIT_SET(RCC->CSR1, RCC_CSR1_LSERDY)) && (srcclk == RCC_RTCCLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Check if LSI is ready and if RTC clock selection is LSI */ + else if ((HAL_IS_BIT_SET(RCC->CSR2, RCC_CSR2_LSIRDY)) && (srcclk == RCC_RTCCLKSOURCE_LSI)) + { + frequency = LSI_VALUE; + } + /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (srcclk == RCC_RTCCLKSOURCE_HSE_DIV32)) + { + frequency = HSE_VALUE / 32U; + } + /* Clock not enabled for RTC*/ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else + { + /* Other external peripheral clock source than RTC */ + + switch (PeriphClk) + { + + case RCC_PERIPHCLK_USART1: + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + if (srcclk == RCC_USART1CLKSOURCE_PCLK1) /* PCLK1 */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK) /* SYSCLK */ + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_USART1CLKSOURCE_HSIKER)) + { + frequency = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + else if ((HAL_IS_BIT_SET(RCC->CSR1, RCC_CSR1_LSERDY)) && (srcclk == RCC_USART1CLKSOURCE_LSE)) + { + frequency = LSE_VALUE; + } + /* Clock not enabled for USART1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_ADC: + + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + if (srcclk == RCC_ADCCLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_ADCCLKSOURCE_HSIKER)) + { + frequency = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + /* Clock not enabled for ADC */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_I2C1: + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + if (srcclk == RCC_I2C1CLKSOURCE_PCLK1) + { + frequency = HAL_RCC_GetPCLK1Freq(); + } + else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2C1CLKSOURCE_HSIKER)) + { + frequency = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + /* Clock not enabled for I2C1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + case RCC_PERIPHCLK_I2S1: + /* Get the current I2S1 source */ + srcclk = __HAL_RCC_GET_I2S1_SOURCE(); + + if (srcclk == RCC_I2S1CLKSOURCE_SYSCLK) + { + frequency = HAL_RCC_GetSysClockFreq(); + } + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (srcclk == RCC_I2S1CLKSOURCE_HSIKER)) + { + frequency = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + else if (srcclk == RCC_I2S1CLKSOURCE_EXT) + { + /* External clock used.*/ + frequency = EXTERNAL_I2S1_CLOCK_VALUE; + } + /* Clock not enabled for I2S1 */ + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; + + default: + break; + } + } + + return (frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of LSE CSS, Low speed clock output and + clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + LSCO_CLK_ENABLE(); + + /* configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + MODIFY_REG(RCC->CSR1, RCC_CSR1_LSCOSEL | RCC_CSR1_LSCOEN, LSCOSource | RCC_CSR1_LSCOEN); + +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + + CLEAR_BIT(RCC->CSR1, RCC_CSR1_LSCOEN); + +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc.c new file mode 100644 index 0000000000..00e6c07f3e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc.c @@ -0,0 +1,1527 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization/de-initialization functions + * + Calendar (Time and Date) configuration + * + Alarms (Alarm A) configuration + * + TimeStamp configuration + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use RTC Driver ##### + =============================================================================== + [..] + + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the + HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarms (Alarm A) and RTC time stamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock source + is LSE or LSI. + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function @ref HAL_RTC_RegisterCallback() to register an interrupt callback. + + [..] + Function @ref HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) : RTC TimeStamp Event callback. + (+) MspInitCallback : RTC MspInit. + (+) MspDeInitCaTimeStampEventCallbackllback : RTC MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function @ref HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + @ref HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) TimeStampEventCallback : RTC TimeStamp Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + + [..] + By default, after the @ref HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions : + examples @ref AlarmAEventCallback(), @ref TimeStampEventCallback(). + Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function + in the @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() only when these callbacks are null + (not registered beforehand). + If not, MspInit or MspDeInit are not null, @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using @ref HAL_RTC_RegisterCallback() before calling @ref HAL_RTC_DeInit() + or @ref HAL_RTC_Init() function. + + [..] + When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + + +/** @addtogroup RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RTC peripheral + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the RTC peripheral state */ + if (hrtc != NULL) + { + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + assert_param(IS_RTC_OUTPUT_PULLUP(hrtc->Init.OutPutPullUp)); + + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + + if (hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } +#else + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + } + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Clear RTC_CR FMT, OSEL and POL Bits */ + hrtc->Instance->CR &= ~(RTC_CR_FMT | RTC_CR_POL | RTC_CR_OSEL); + /* Set RTC_CR register */ + hrtc->Instance->CR |= (hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); + + /* Configure the RTC PRER */ + hrtc->Instance->PRER = (hrtc->Init.SynchPrediv); + hrtc->Instance->PRER |= (hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + if (status == HAL_OK) + { + hrtc->Instance->CR &= ~(RTC_CR_TAMPALRM_PU | RTC_CR_TAMPALRM_TYPE | RTC_CR_OUT2EN); + hrtc->Instance->CR |= (hrtc->Init.OutPutPullUp | hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the RTC peripheral. + * @note This function does not reset the RTC Backup Data registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Reset TR, DR and CR registers */ + hrtc->Instance->TR = 0x00000000U; + hrtc->Instance->DR = ((uint32_t)(RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + + /* Reset all RTC CR register bits */ + hrtc->Instance->CR &= 0x00000000U; + hrtc->Instance->PRER = ((uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU)); + hrtc->Instance->ALRMAR = 0x00000000U; + hrtc->Instance->SHIFTR = 0x00000000U; + hrtc->Instance->CALR = 0x00000000U; + hrtc->Instance->ALRMASSR = 0x00000000U; + + /* Exit initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); + +#else + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ + + hrtc->State = HAL_RTC_STATE_RESET; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, + pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Unregister an RTC Callback + * RTC callback is redirected to the weak predefined callback + * @param hrtc RTC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the RTC MSP. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Set RTC current time. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sTime->Seconds) << RTC_TR_SU_Pos) | \ + (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t)(sTime->Seconds) << RTC_TR_SU_Pos) | \ + ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + + /* Set the RTC_TR register */ + hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Clear the bits to be configured */ + hrtc->Instance->CR &= ((uint32_t)~RTC_CR_BKP); + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current time. + * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds + * value in second fraction ratio with time unit following generic formula: + * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read + * to ensure consistency between the time and date values. + * @param hrtc RTC handle + * @param sTime Pointer to Time structure with Hours, Minutes and Seconds fields returned + * with input format (BIN or BCD), also SubSeconds field returning the + * RTC_SSR register content and SecondFraction field the Synchronous pre-scaler + * factor to be used for second fraction ratio computation. + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get subseconds structure field from the corresponding register*/ + sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR); + + /* Get SecondFraction structure field from the corresponding register field*/ + sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); + + /* Get the TR register */ + tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); + sTime->Seconds = (uint8_t)((tmpreg & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + + return HAL_OK; +} + +/** + * @brief Set RTC current date. + * @param hrtc RTC handle + * @param sDate Pointer to date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date) << RTC_DR_DU_Pos) | \ + ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ + (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ + (((uint32_t)sDate->Date) << RTC_DR_DU_Pos) | \ + (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Set the RTC_DR register */ + hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Get RTC current date. + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values + * in the higher-order calendar shadow registers to ensure consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers until Current date is read. + * @param hrtc RTC handle + * @param sDate Pointer to Date structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); + sDate->Date = (uint8_t)((datetmpreg & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ +/** + * @brief Set the specified RTC Alarm. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + + /* Configure the Alarm A Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if (sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set the specified RTC Alarm with Interrupt. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @param hrtc RTC handle + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart; + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Seconds) << RTC_ALRMAR_SU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + /* Configure the Alarm A or Alarm B Sub Second registers */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Alarm register */ + if (sAlarm->Alarm == RTC_ALARM_A) + { + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + tickstart = HAL_GetTick(); + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure the Alarm A Sub Second register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA); + } + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the specified RTC Alarm. + * @param hrtc RTC handle + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + if (Alarm == RTC_ALARM_A) + { + /* AlarmA */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC Alarm value and masks. + * @param hrtc RTC handle + * @param sAlarm Pointer to Date structure + * @param Alarm Specifies the Alarm. + * This parameter can be one of the following values: + * @arg RTC_ALARM_A: AlarmA + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t tmpreg; + uint32_t subsecondtmpreg; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + if (Alarm == RTC_ALARM_A) + { + /* AlarmA */ + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t)((tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)) >> RTC_ALRMAR_SU_Pos); + sAlarm->AlarmTime.TimeFormat = (uint8_t)((tmpreg & RTC_ALRMAR_PM) >> RTC_ALRMAR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); + } + + if (Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @brief Handle Alarm interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the AlarmA interrupt source enable status */ + if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U) + { + /* Get the pending status of the AlarmA Interrupt */ + if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U) + { + /* Clear the AlarmA interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call Compare Match registered Callback */ + hrtc->AlarmAEventCallback(hrtc); +#else + /* AlarmA callback */ + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handle AlarmA Polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + + uint32_t tickstart = HAL_GetTick(); + + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group4 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + +@endverbatim + * @{ + */ + +/** + * @brief Wait until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + + /* Clear RSF flag */ + hrtc->Instance->ICSR &= (uint32_t)RTC_RSF_MASK; + + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while ((hrtc->Instance->ICSR & RTC_ICSR_RSF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group5 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Return the RTC handle state. + * @param hrtc RTC handle + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc) +{ + /* Return RTC handle state */ + return hrtc->State; +} + +/** + * @} + */ +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ +/** + * @brief Enter the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Check if the Initialization mode is set */ + if ((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) + { + /* Set the Initialization mode */ + SET_BIT(hrtc->Instance->ICSR, RTC_ICSR_INIT); + + tickstart = HAL_GetTick(); + /* Wait till RTC is in INIT state and if Time out is reached exit */ + while (((hrtc->Instance->ICSR & RTC_ICSR_INITF) == 0U) && (status != HAL_TIMEOUT)) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + hrtc->State = HAL_RTC_STATE_TIMEOUT; + } + } + } + + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Exit Initialization mode */ + CLEAR_BIT(RTC->ICSR, RTC_ICSR_INIT); + + /* If CR_BYPSHAD bit = 0, wait for synchro */ + if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + } + else + { + /* Clear BYPSHAD bit */ + CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + status = HAL_TIMEOUT; + } + /* Restore BYPSHAD bit */ + SET_BIT(RTC->CR, RTC_CR_BYPSHAD); + } + + return status; +} +/** + * @brief Convert a 2 digit decimal to BCD format. + * @param Value Byte to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t Value) +{ + uint32_t bcdhigh = 0U; + uint8_t Param = Value; + + while (Param >= 10U) + { + bcdhigh++; + Param -= 10U; + } + + return ((uint8_t)(bcdhigh << 4U) | Param); +} + +/** + * @brief Convert from 2 digit BCD to Binary. + * @param Value BCD value to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t Value) +{ + uint32_t tmp; + tmp = (((uint32_t)Value & 0xF0U) >> 4U) * 10U; + return (uint8_t)(tmp + ((uint32_t)Value & 0x0FU)); +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc_ex.c new file mode 100644 index 0000000000..633191c0f8 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_rtc_ex.c @@ -0,0 +1,834 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_rtc_ex.c + * @author MCD Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real Time Clock (RTC) Extended peripheral: + * + RTC Time Stamp functions + * + Extended Control functions + * + Extended RTC features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Enable the RTC domain access. + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Outputs configuration *** + ============================= + [..] The RTC has 2 different outputs: + (+) RTC_ALARM: this output is used to manage the RTC Alarm A. + To output the selected RTC signal, use the HAL_RTC_Init() function. + (+) RTC_CALIB: this output is 512Hz signal or 1Hz. + To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. + (+) Two pins can be used as RTC_ALARM or RTC_CALIB (PC13, PB2) managed on + the RTC_OR register. + (+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is + automatically configured in output alternate function. + + *** Smooth digital Calibration configuration *** + ================================================ + [..] + (+) Configure the RTC Original Digital Calibration Value and the corresponding + calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib() + function. + + *** TimeStamp configuration *** + =============================== + [..] + (+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. + You can also configure the RTC TimeStamp with interrupt mode using the + HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTCEx_Exported_Functions + * @{ + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @brief RTC TimeStamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC TimeStamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure TimeStamp feature + +@endverbatim + * @{ + */ + +/** + * @brief Set TimeStamp. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg |= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Set TimeStamp with Interrupt. + * @note This API must be called before enabling the TimeStamp feature. + * @param hrtc RTC handle + * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the + * rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the + * falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. + * The RTC TimeStamp Pin is per default PC13, but for reasons of + * compatibility, this parameter is required. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + tmpreg |= TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable IT timestamp */ + __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS); + + /* RTC timestamp Interrupt Configuration: EXTI configuration */ + __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT(); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate TimeStamp. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmpreg; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Time Stamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Get the RTC TimeStamp value. + * @param hrtc RTC handle + * @param sTimeStamp Pointer to Time structure + * @param sTimeStampDate Pointer to Date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, + RTC_DateTypeDef *sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime, tmpdate; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the TimeStamp time and date registers values */ + tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TSTR_HU_Pos); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TSTR_MNU_Pos); + sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TR_ST | RTC_TR_SU)) >> RTC_TSTR_SU_Pos); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> RTC_TSTR_PM_Pos); + sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR; + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0U; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> RTC_TSDR_MU_Pos); + sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> RTC_TSDR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the TimeStamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Clear the TIMESTAMP Flags */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + return HAL_OK; +} + +/** + * @brief TimeStamp callback. + * @param hrtc RTC handle + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + + +/** + * @brief Handle TimeStamp interrupt request. + * @param hrtc RTC handle + * @retval None + */ +void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the TimeStamp interrupt source enable status */ + if (READ_BIT(RTC->MISR, RTC_MISR_TSMF) != 0U) + { +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + /* Call TimeStampEvent registered Callback */ + hrtc->TimeStampEventCallback(hrtc); +#else + /* TIMESTAMP callback */ + HAL_RTCEx_TimeStampEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/ + WRITE_REG(RTC->SCR, RTC_SCR_CTSF); + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + + +/** + * @brief Handle TimeStamp polling request. + * @param hrtc RTC handle + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U) + { + if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U) + { + /* Clear the TIMESTAMP OverRun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Change TIMESTAMP state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + + +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Set the Coarse calibration parameters. + (+) Deactivate the Coarse calibration parameters + (+) Set the Smooth calibration parameters. + (+) Configure the Synchronization Shift Control Settings. + (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enable the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enable the Bypass Shadow feature. + (+) Disable the Bypass Shadow feature. + +@endverbatim + * @{ + */ + + + +/** + * @brief Set the Smooth calibration parameters. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue must be equal to 0. + * @param hrtc RTC handle + * @param SmoothCalibPeriod Select the Smooth Calibration Period. + * This parameter can be can be one of the following values : + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. + * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, + uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* check if a calibration is pending*/ + if ((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + tickstart = HAL_GetTick(); + + /* check if a calibration is pending*/ + while ((hrtc->Instance->ICSR & RTC_ICSR_RECALPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Smooth calibration settings */ + hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Synchronization Shift Control Settings. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @param hrtc RTC handle + * @param ShiftAdd1S Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values: + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed*/ + while ((hrtc->Instance->ICSR & RTC_ICSR_SHPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Check if the reference clock detection is disabled */ + if ((hrtc->Instance->CR & RTC_CR_REFCKON) == 0U) + { + /* Configure the Shift settings */ + hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + } + else + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @param CalibOutput Select the Calibration output Selection . + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear flags before config */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)CalibOutput; + + __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Enable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Enable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Disable the RTC reference clock detection. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + if (status == HAL_OK) + { + /* Disable clockref detection */ + __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Enable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the BYPSHAD bit */ + hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disable the Bypass Shadow feature. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @param hrtc RTC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Reset the BYPSHAD bit */ + hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard.c new file mode 100644 index 0000000000..44c9f55a35 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard.c @@ -0,0 +1,3182 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smartcard.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). + (#) Associate a USART to the SMARTCARD handle hsmartcard. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, + the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission + error enabling or disabling in the hsmartcard handle Init structure. + + (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) + in the hsmartcard handle AdvancedInit structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMARTCARD_MspInit() API. + [..] + (@) The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + [..] + [..] Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + + [..] + By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init() + and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit() + or HAL_SMARTCARD_Init() function. + + [..] + When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants + * @{ + */ +#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ + +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ + USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \ + USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions + * @{ + */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + associated to the SmartCard. + (+) These parameters can be configured: + (++) Baud Rate + (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity + (++) Receiver/transmitter modes + (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) + (++) Prescaler value + (++) Guard bit time + (++) NACK enabling or disabling on transmission error + + (+) The following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) Time out enabling (and if activated, timeout value) + (++) Block length + (++) Auto-retry counter + [..] + The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + The USART frame format is given in the following table: + + Table 1. USART frame format. + +---------------------------------------------------------------+ + | M1M0 bits | PCE bit | USART frame | + |-----------------------|---------------------------------------| + | 01 | 1 | | SB | 8 bit data | PB | STB | | + +---------------------------------------------------------------+ + + + * @{ + */ + +/** + * @brief Initialize the SMARTCARD mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmartcard->Lock = HAL_UNLOCKED; + +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + SMARTCARD_InitCallbacksToDefault(hsmartcard); + + if (hsmartcard->MspInitCallback == NULL) + { + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + } + + /* Init the low level hardware */ + hsmartcard->MspInitCallback(hsmartcard); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_SMARTCARD_MspInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + } + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral to set smartcard mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN in the USART_CR2 register, + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); + + /* set the USART in SMARTCARD mode */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); + + /* Set the SMARTCARD Communication parameters */ + if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Set the SMARTCARD transmission completion indication */ + SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); + + if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) + { + SMARTCARD_AdvFeatureConfig(hsmartcard); + } + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ + return (SMARTCARD_CheckIdleState(hsmartcard)); +} + +/** + * @brief DeInitialize the SMARTCARD peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + WRITE_REG(hsmartcard->Instance->CR1, 0x0U); + WRITE_REG(hsmartcard->Instance->CR2, 0x0U); + WRITE_REG(hsmartcard->Instance->CR3, 0x0U); + WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); + WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); + + /* DeInit the low level hardware */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + if (hsmartcard->MspDeInitCallback == NULL) + { + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + } + /* DeInit the low level hardware */ + hsmartcard->MspDeInitCallback(hsmartcard); +#else + HAL_SMARTCARD_MspDeInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; + hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Initialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMARTCARD Callback + * To be used instead of the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + switch (CallbackID) + { + + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = pCallback; + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} + +/** + * @brief Unregister an SMARTCARD callback + * SMARTCARD callback is redirected to the weak predefined callback + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmartcard); + + if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback*/ + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmartcard); + + return status; +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. The USART should be configured as: + (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + [..] + (#) There are two modes of transfer: + (##) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (##) Non-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (#) Blocking mode APIs are : + (##) HAL_SMARTCARD_Transmit() + (##) HAL_SMARTCARD_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (##) HAL_SMARTCARD_Transmit_IT() + (##) HAL_SMARTCARD_Receive_IT() + (##) HAL_SMARTCARD_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (##) HAL_SMARTCARD_Transmit_DMA() + (##) HAL_SMARTCARD_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (##) HAL_SMARTCARD_TxCpltCallback() + (##) HAL_SMARTCARD_RxCpltCallback() + (##) HAL_SMARTCARD_ErrorCallback() + + [..] + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (##) HAL_SMARTCARD_Abort() + (##) HAL_SMARTCARD_AbortTransmit() + (##) HAL_SMARTCARD_AbortReceive() + (##) HAL_SMARTCARD_Abort_IT() + (##) HAL_SMARTCARD_AbortTransmit_IT() + (##) HAL_SMARTCARD_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), + a set of Abort Complete Callbacks are provided: + (##) HAL_SMARTCARD_AbortCpltCallback() + (##) HAL_SMARTCARD_AbortTransmitCpltCallback() + (##) HAL_SMARTCARD_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. + If user wants to abort it, Abort services should be called by user. + (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt + mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + const uint8_t *ptmpdata = pData; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + while (hsmartcard->TxXferCount > 0U) + { + hsmartcard->TxXferCount--; + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); + ptmpdata++; + } + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, + tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Check the remain data to be received */ + while (hsmartcard->RxXferCount > 0U) + { + hsmartcard->RxXferCount--; + + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); + ptmpdata++; + } + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_TDR register is empty, i.e one interrupt per data to transmit. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * TXFIFO threshold reached. In that case the interrupt rate depends on + * TXFIFO threshold configuration. + * @note This function sets the hsmartcard->TxIsr function pointer according to + * the FIFO mode (data transmission processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + hsmartcard->TxISR = NULL; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Configure Tx interrupt processing */ + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_RDR register can be read, i.e one interrupt per data to receive. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * RXFIFO threshold reached. In that case the interrupt rate depends on + * RXFIFO threshold configuration. + * @note This function sets the hsmartcard->RxIsr function pointer according to + * the FIFO mode (data reception processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Configure Rx interrupt processing */ + if ((hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) && (Size >= hsmartcard->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the SMARTCARD error callback */ + hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Enable the SMARTCARD transmit DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, + Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the UART Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), + * the received data contain the parity bit (MSB position). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the SMARTCARD DMA error callback */ + hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, + Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t abortcplt = 1U; + + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, + DMA Abort complete callbacks should be initialised before any call + to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hsmartcard->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; + } + else + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hsmartcard->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; + } + else + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* SMARTCARD Tx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* SMARTCARD Rx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD interrupt requests. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); + uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); + uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U)))) + { + /* SMARTCARD parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + /* SMARTCARD frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + /* SMARTCARD noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U) + || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; + } + + /* Call SMARTCARD Error Call back function if need be --------------------------*/ + if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = hsmartcard->ErrorCode; + if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + SMARTCARD_EndRxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + /* other error type to be considered as blocking : + - Frame error in Transmission + */ + else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ + SMARTCARD_EndTxTransfer(hsmartcard); + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ + if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) + { + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + __HAL_UNLOCK(hsmartcard); +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information + to be available during HAL_SMARTCARD_RxCpltCallback() processing */ + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); + return; + } + + /* SMARTCARD in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (hsmartcard->TxISR != NULL) + { + hsmartcard->TxISR(hsmartcard); + } + return; + } + + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + SMARTCARD_EndTransmit_IT(hsmartcard); + return; + } + } + + /* SMARTCARD TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + hsmartcard->TxFifoEmptyCallback(hsmartcard); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_SMARTCARDEx_TxFifoEmptyCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } + + /* SMARTCARD RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + hsmartcard->RxFifoFullCallback(hsmartcard); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_SMARTCARDEx_RxFifoFullCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Receive Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + handle and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMARTCARD handle state. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Return SMARTCARD handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hsmartcard->gState; + temp2 = (uint32_t)hsmartcard->RxState; + + return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the SMARTCARD handle error code. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle Error Code + */ +uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard) +{ + return hsmartcard->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hsmartcard SMARTCARD handle. + * @retval none + */ +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Init the SMARTCARD Callback settings */ + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak + RxFifoFullCallback */ + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak + TxFifoEmptyCallback */ + +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief Configure the SMARTCARD associated USART peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpreg; + SMARTCARD_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); + assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); + assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); + assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); + assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); + assert_param(IS_SMARTCARD_CLOCKPRESCALER(hsmartcard->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). + * Oversampling is forced to 16 (OVER8 = 0). + * Configure the Parity and Mode: + * set PS bit according to hsmartcard->Init.Parity value + * set TE and RE bits according to hsmartcard->Init.Mode value */ + tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) | + ((uint32_t)hsmartcard->Init.WordLength)); + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = hsmartcard->Init.StopBits; + /* Synchronous mode is activated by default */ + tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; + tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - one-bit sampling method versus three samples' majority rule + * according to hsmartcard->Init.OneBitSampling + * - NACK transmission in case of parity error according + * to hsmartcard->Init.NACKEnable + * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ + + tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; + tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*--------------------- SMARTCARD clock PRESC Configuration ----------------*/ + /* Configure + * - SMARTCARD Clock Prescaler: set PRESCALER according to hsmartcard->Init.ClockPrescaler value */ + MODIFY_REG(hsmartcard->Instance->PRESC, USART_PRESC_PRESCALER, hsmartcard->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); + + /*-------------------------- USART RTOR Configuration ----------------------*/ + tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); + if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) + { + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; + } + MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg); + + /*-------------------------- USART BRR Configuration -----------------------*/ + SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource); + tmpreg = 0U; + switch (clocksource) + { + case SMARTCARD_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_HSI: + pclk = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + case SMARTCARD_CLOCKSOURCE_LSE: + tmpreg = (uint32_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hsmartcard->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + return ret; +} + + +/** + * @brief Configure the SMARTCARD associated USART peripheral advanced features. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); + } + +} + +/** + * @brief Check the SMARTCARD Idle State. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tickstart; + + /* Initialize the SMARTCARD ErrorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the SMARTCARD states */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag Specifies the SMARTCARD flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + /* Stop SMARTCARD DMA Tx request if ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->TxXferCount = 0U; + SMARTCARD_EndTxTransfer(hsmartcard); + } + } + + /* Stop SMARTCARD DMA Rx request if ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->RxXferCount = 0U; + SMARTCARD_EndRxTransfer(hsmartcard); + } + } + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + hsmartcard->TxXferCount = 0U; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmarx != NULL) + { + if (hsmartcard->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmatx != NULL) + { + if (hsmartcard->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + } +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + for (nb_tx_data = hsmartcard->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else if (READ_BIT(hsmartcard->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Tx process is ended, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Clear TxISR function pointer */ + hsmartcard->TxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hsmartcard->TxCpltCallback(hsmartcard); +#else + /* Call legacy weak Tx complete callback */ + HAL_SMARTCARD_TxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_rx_data; + uint16_t rxdatacount; + + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + for (nb_rx_data = hsmartcard->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = hsmartcard->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < hsmartcard->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard_ex.c new file mode 100644 index 0000000000..6fe950f7fd --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smartcard_ex.c @@ -0,0 +1,494 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smartcard_ex.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides extended firmware functions to manage the following + * functionalities of the SmartCard. + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================= + ##### SMARTCARD peripheral extended features ##### + ============================================================================= + [..] + The Extended SMARTCARD HAL driver can be used as follows: + + (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), + then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, + auto-retry counter,...) in the hsmartcard AdvancedInit structure. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When SMARTCARD operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARDEx SMARTCARDEx + * @brief SMARTCARD Extended HAL module driver + * @{ + */ +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Constants SMARTCARD Extended Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions + * @{ + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the SMARTCARD. + (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly + (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature + (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature + +@endverbatim + * @{ + */ + +/** @brief Update on the fly the SMARTCARD block length in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param BlockLength SMARTCARD block length (8-bit long at most) + * @retval None + */ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) +{ + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos)); +} + +/** @brief Update on the fly the receiver timeout value in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) +{ + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); +} + +/** @brief Enable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** @brief Disable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (++) HAL_SMARTCARDEx_RxFifoFullCallback() + (++) HAL_SMARTCARDEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief SMARTCARD RX Fifo full callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD TX Fifo empty callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group3 Extended Peripheral FIFO Control functions + * @brief SMARTCARD control functions + * +@verbatim + =============================================================================== + ##### Peripheral FIFO Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SMARTCARD + FIFO feature. + (+) HAL_SMARTCARDEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_SMARTCARDEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_SMARTCARDEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_SMARTCARDEx_SetRxFifoThreshold() API sets the RX FIFO threshold +@endverbatim + * @{ + */ + +/** + * @brief Enable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_ENABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_DISABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update TX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update RX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param hsmartcard SMARTCARD handle. + * @retval None + */ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE) + { + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / \ + (uint16_t)denominator[tx_fifo_threshold]; + hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / \ + (uint16_t)denominator[rx_fifo_threshold]; + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus.c new file mode 100644 index 0000000000..f5cfd04fdf --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus.c @@ -0,0 +1,2779 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smbus.c + * @author MCD Application Team + * @brief SMBUS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the System Management Bus (SMBus) peripheral, + * based on I2C principles of operation : + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMBUS HAL driver can be used as follows: + + (#) Declare a SMBUS_HandleTypeDef handle structure, for example: + SMBUS_HandleTypeDef hsmbus; + + (#)Initialize the SMBUS low level resources by implementing the HAL_SMBUS_MspInit() API: + (##) Enable the SMBUSx interface clock + (##) SMBUS pins configuration + (+++) Enable the clock for the SMBUS GPIOs + (+++) Configure SMBUS pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SMBUSx interrupt priority + (+++) Enable the NVIC SMBUS IRQ Channel + + (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Addressing mode, + Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode, + Peripheral mode and Packet Error Check mode in the hsmbus Init structure. + + (#) Initialize the SMBUS registers by calling the HAL_SMBUS_Init() API: + (++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMBUS_MspInit(&hsmbus) API. + + (#) To check if target device is ready for communication, use the function HAL_SMBUS_IsDeviceReady() + + (#) For SMBUS IO operations, only one mode of operations is available within this driver + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterTxCpltCallback() + (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterRxCpltCallback() + (+) Abort a master/host SMBUS process communication with Interrupt using HAL_SMBUS_Master_Abort_IT() + (++) The associated previous transfer callback is called at the end of abort process + (++) mean HAL_SMBUS_MasterTxCpltCallback() in case of previous state was master transmit + (++) mean HAL_SMBUS_MasterRxCpltCallback() in case of previous state was master receive + (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode + using HAL_SMBUS_EnableListen_IT() HAL_SMBUS_DisableListen_IT() + (++) When address slave/device SMBUS match, HAL_SMBUS_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction + request by master/host (Write/Read). + (++) At Listen mode end HAL_SMBUS_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ListenCpltCallback() + (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveTxCpltCallback() + (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveRxCpltCallback() + (+) Enable/Disable the SMBUS alert mode using + HAL_SMBUS_EnableAlert_IT() or HAL_SMBUS_DisableAlert_IT() + (++) When SMBUS Alert is generated HAL_SMBUS_ErrorCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Alert Error Code using function HAL_SMBUS_GetError() + (+) Get HAL state machine or error values using HAL_SMBUS_GetState() or HAL_SMBUS_GetError() + (+) In case of transfer Error, HAL_SMBUS_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Error Code using function HAL_SMBUS_GetError() + + *** SMBUS HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SMBUS HAL driver. + + (+) __HAL_SMBUS_ENABLE: Enable the SMBUS peripheral + (+) __HAL_SMBUS_DISABLE: Disable the SMBUS peripheral + (+) __HAL_SMBUS_GET_FLAG: Check whether the specified SMBUS flag is set or not + (+) __HAL_SMBUS_CLEAR_FLAG: Clear the specified SMBUS pending flag + (+) __HAL_SMBUS_ENABLE_IT: Enable the specified SMBUS interrupt + (+) __HAL_SMBUS_DISABLE_IT: Disable the specified SMBUS interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SMBUS_RegisterCallback() or HAL_SMBUS_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_SMBUS_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_SMBUS_RegisterAddrCallback. + [..] + Use function HAL_SMBUS_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_SMBUS_UnRegisterAddrCallback. + [..] + By default, after the HAL_SMBUS_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SMBUS_MasterTxCpltCallback(), HAL_SMBUS_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SMBUS_RegisterCallback() before calling HAL_SMBUS_DeInit() + or HAL_SMBUS_Init() function. + [..] + When the compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the SMBUS HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMBUS SMBUS + * @brief SMBUS HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Define SMBUS Private Constants + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFUL) /*!< SMBUS TIMING clear register Mask */ +#define HAL_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define HAL_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TC (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define MAX_NBYTE_SIZE 255U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout); + +/* Private functions for SMBUS transfer IRQ handler */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); + +/* Private function to flush TXDR register */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus); + +/* Private function to handle start, restart or stop a transfer */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request); + +/* Private function to Convert Specific options */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the SMBUSx peripheral: + + (+) User must Implement HAL_SMBUS_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, IT and NVIC ). + + (+) Call the function HAL_SMBUS_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Bus Timeout + (++) Analog Filer mode + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + (++) Packet Error Check mode + (++) Peripheral mode + + + (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration + of the selected SMBUSx peripheral. + + (+) Enable/Disable Analog/Digital filters with HAL_SMBUS_ConfigAnalogFilter() and + HAL_SMBUS_ConfigDigitalFilter(). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SMBUS according to the specified parameters + * in the SMBUS_InitTypeDef and initialize the associated handle. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter)); + assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1)); + assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode)); + assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode)); + assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2)); + assert_param(IS_SMBUS_OWN_ADDRESS2_MASK(hsmbus->Init.OwnAddress2Masks)); + assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode)); + assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode)); + assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode)); + assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode)); + + if (hsmbus->State == HAL_SMBUS_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmbus->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + + if (hsmbus->MspInitCallback == NULL) + { + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hsmbus->MspInitCallback(hsmbus); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /*---------------------------- SMBUSx TIMINGR Configuration ------------------------*/ + /* Configure SMBUSx: Frequency range */ + hsmbus->Instance->TIMINGR = hsmbus->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- SMBUSx TIMEOUTR Configuration ------------------------*/ + /* Configure SMBUSx: Bus Timeout */ + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TIMOUTEN; + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TEXTEN; + hsmbus->Instance->TIMEOUTR = hsmbus->Init.SMBusTimeout; + + /*---------------------------- SMBUSx OAR1 Configuration -----------------------*/ + /* Configure SMBUSx: Own Address1 and ack own address1 mode */ + hsmbus->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + if (hsmbus->Init.OwnAddress1 != 0UL) + { + if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT) + { + hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | hsmbus->Init.OwnAddress1); + } + } + + /*---------------------------- SMBUSx CR2 Configuration ------------------------*/ + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */ + /* AUTOEND and NACK bit will be manage during Transfer process */ + hsmbus->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- SMBUSx OAR2 Configuration -----------------------*/ + /* Configure SMBUSx: Dual mode and Own Address2 */ + hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | \ + (hsmbus->Init.OwnAddress2Masks << 8U)); + + /*---------------------------- SMBUSx CR1 Configuration ------------------------*/ + /* Configure SMBUSx: Generalcall and NoStretch mode */ + hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | \ + hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | \ + hsmbus->Init.AnalogFilter); + + /* Enable Slave Byte Control only in case of Packet Error Check is enabled + and SMBUS Peripheral is set in Slave mode */ + if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE) && \ + ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))) + { + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + } + + /* Enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the SMBUS peripheral. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the SMBUS Peripheral Clock */ + __HAL_SMBUS_DISABLE(hsmbus); + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + if (hsmbus->MspDeInitCallback == NULL) + { + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hsmbus->MspDeInitCallback(hsmbus); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspDeInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_RESET; + hsmbus->State = HAL_SMBUS_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} + +/** + * @brief Initialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Configure Analog noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref SMBUS_ANALOGFILTER_ENABLE + * @arg @ref SMBUS_ANALOGFILTER_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(AnalogFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Reset ANOFF bit */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hsmbus->Instance->CR1 |= AnalogFilter; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure Digital noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_DIGITAL_FILTER(DigitalFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Get the old register value */ + tmpreg = hsmbus->Instance->CR1; + + /* Reset I2C DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << I2C_CR1_DNF_Pos; + + /* Store the new register value */ + hsmbus->Instance->CR1 = tmpreg; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMBUS Callback + * To be used instead of the weak predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = pCallback; + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = pCallback; + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief Unregister an SMBUS Callback + * SMBUS callback is redirected to the weak predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief Register the Slave Address Match SMBUS Callback + * To be used instead of the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +/** + * @brief UnRegister the Slave Address Match SMBUS Callback + * Info Ready SMBUS Callback is redirected to the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsmbus); + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + return status; +} + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMBUS data + transfers. + + (#) Blocking mode function to check if device is ready for usage is : + (++) HAL_SMBUS_IsDeviceReady() + + (#) There is only one mode of transfer: + (++) Non-Blocking mode : The communication is performed using Interrupts. + These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SMBUS IRQ when using Interrupt mode. + + (#) Non-Blocking mode functions with Interrupt are : + (++) HAL_SMBUS_Master_Transmit_IT() + (++) HAL_SMBUS_Master_Receive_IT() + (++) HAL_SMBUS_Slave_Transmit_IT() + (++) HAL_SMBUS_Slave_Receive_IT() + (++) HAL_SMBUS_EnableListen_IT() or alias HAL_SMBUS_EnableListen_IT() + (++) HAL_SMBUS_DisableListen_IT() + (++) HAL_SMBUS_EnableAlert_IT() + (++) HAL_SMBUS_DisableAlert_IT() + + (#) A set of Transfer Complete Callbacks are provided in non-Blocking mode: + (++) HAL_SMBUS_MasterTxCpltCallback() + (++) HAL_SMBUS_MasterRxCpltCallback() + (++) HAL_SMBUS_SlaveTxCpltCallback() + (++) HAL_SMBUS_SlaveRxCpltCallback() + (++) HAL_SMBUS_AddrCallback() + (++) HAL_SMBUS_ListenCpltCallback() + (++) HAL_SMBUS_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_WRITE); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + hsmbus->XferOptions, + SMBUS_GENERATE_START_WRITE); + } + + /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_READ); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, Misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + hsmbus->XferOptions, + SMBUS_GENERATE_START_READ); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master/host SMBUS process communication with Interrupt. + * @note This abort can be called only if state is ready + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) +{ + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + /* Keep the same state as previous */ + /* to perform as well the call of the corresponding end of transfer callback */ + if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + } + else if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set NBYTES to 1 to generate a dummy read on SMBUS peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, 1, SMBUS_AUTOEND_MODE, SMBUS_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + } + else + { + /* Nothing to do */ + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_TX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_TX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + } + else + { + /* Set NBYTE to transmit */ + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_RX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_RX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferSize = Size; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Set NBYTE to receive */ + /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */ + /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */ + /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */ + /* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */ + if (((SMBUS_GET_PEC_MODE(hsmbus) != 0UL) && (hsmbus->XferSize == 2U)) || (hsmbus->XferSize == 1U)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + else + { + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions | SMBUS_RELOAD_MODE, SMBUS_NO_STARTSTOP); + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + + /* Enable the Address Match interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) + { + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Disable the Address Match interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 |= I2C_CR1_ALERTEN; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + + /* Enable Alert Interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} +/** + * @brief Disable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 &= ~I2C_CR1_ALERTEN; + + /* Disable Alert Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} + +/** + * @brief Check if target device is ready for communication. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t SMBUS_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + do + { + /* Generate Start */ + hsmbus->Instance->CR2 = SMBUS_GENERATE_START(hsmbus->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + return HAL_ERROR; + } + } + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (SMBUS_Trials == Trials) + { + /* Generate Stop */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Increment Trials */ + SMBUS_Trials++; + } while (SMBUS_Trials < Trials); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief Handle SMBUS event interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + /* Use a local variable to store the current ISR flags */ + /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */ + uint32_t tmpisrvalue = READ_REG(hsmbus->Instance->ISR); + uint32_t tmpcr1value = READ_REG(hsmbus->Instance->CR1); + + /* SMBUS in mode Transmitter ---------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_TX) == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Receiver ----------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_RX) == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Listener Only --------------------------------------------------*/ + if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + } +} + +/** + * @brief Handle SMBUS error interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + SMBUS_ITErrorHandler(hsmbus); +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterRxCpltCallback() could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveRxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param TransferDirection Master request Transfer Direction (Write/Read) + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief SMBUS error callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ErrorCallback() could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMBUS handle state. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL state + */ +uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus) +{ + /* Return SMBUS handle state */ + return hsmbus->State; +} + +/** + * @brief Return the SMBUS error code. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval SMBUS Error Code + */ +uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus) +{ + return hsmbus->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @brief Data transfers Private functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint16_t DevAddress; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + /* Check and treat errors if errors occurs during STOP process */ + SMBUS_ITErrorHandler(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */ + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Re-enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + /* Store Last receive data if any */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + DevAddress = (uint16_t)(hsmbus->Instance->CR2 & I2C_CR2_SADD); + + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + else if ((hsmbus->XferCount == 0U) && (hsmbus->XferSize == 0U)) + { + /* Call TxCpltCallback() if no stop mode is set */ + if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TC) != RESET) + { + if (hsmbus->XferCount == 0U) + { + /* Specific use case for Quick command */ + if (hsmbus->pBuffPtr == NULL) + { + /* Generate a Stop command */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + } + /* Call TxCpltCallback() if no stop mode is set */ + else if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when SMBUS_AUTOEND_MODE enable */ + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint8_t TransferDirection; + uint16_t SlaveAddrCode; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Check that SMBUS transfer finished */ + /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hsmbus->XferCount == 0U) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + } + else + { + /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/ + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set HAL State to "Idle" State, mean to LISTEN state */ + /* So reset Slave Busy state */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Disable RX/TX Interrupts, keep only ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_ADDR) != RESET) + { + TransferDirection = (uint8_t)(SMBUS_GET_DIR(hsmbus)); + SlaveAddrCode = (uint16_t)(SMBUS_GET_ADDR_MATCH(hsmbus)); + + /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/ + /* Other ADDRInterrupt will be treat in next Listen usecase */ + __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ADDRI); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call Slave Addr callback */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#else + HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET)) + { + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferSize--; + hsmbus->XferCount--; + + if (hsmbus->XferCount == 1U) + { + /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */ + /* or only the last Byte of Transfer */ + /* So reset the RELOAD bit mode */ + hsmbus->XferOptions &= ~SMBUS_RELOAD_MODE; + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + else if (hsmbus->XferCount == 0U) + { + /* Last Byte is received, disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_SMBUS_STATE_LISTEN */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveRxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Set Reload for next Bytes */ + SMBUS_TransferConfig(hsmbus, 0, 1, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + + /* Ack last Byte Read */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + } + } + else if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hsmbus->XferCount > 0U) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferCount--; + hsmbus->XferSize--; + } + + if (hsmbus->XferCount == 0U) + { + /* Last Byte is Transmitted */ + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_SMBUS_STATE_LISTEN */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveTxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + + /* Check if STOPF is set */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + /* Store Last receive data if any */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable RX and TX Interrupts */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Disable ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + /* Disable Address Acknowledge */ + hsmbus->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear ADDR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + hsmbus->XferOptions = 0; + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ListenCpltCallback(hsmbus); +#else + HAL_SMBUS_ListenCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Manage the enabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + + if ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT) + { + /* Enable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Enable ADDR, STOP interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI; + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI; + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of SMBUS interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_SMBUS_ENABLE_IT(hsmbus, tmpisr); +} +/** + * @brief Manage the disabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + uint32_t tmpstate = hsmbus->State; + + if ((tmpstate == HAL_SMBUS_STATE_READY) && ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Disable TC, STOP, NACK and TXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_TXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Disable TC, STOP, NACK and RXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_RXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Disable ADDR, STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI; + + if (SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_SMBUS_DISABLE_IT(hsmbus, tmpisr); +} + +/** + * @brief SMBUS interrupts error handler. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus) +{ + uint32_t itflags = READ_REG(hsmbus->Instance->ISR); + uint32_t itsources = READ_REG(hsmbus->Instance->CR1); + uint32_t tmpstate; + uint32_t tmperror; + + /* SMBUS Bus error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR); + } + + /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR); + } + + /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO); + } + + /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/ + if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT; + + /* Clear TIMEOUT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT); + } + + /* SMBUS Alert error interrupt occurred -----------------------------------------------*/ + if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + } + + /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/ + if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR; + + /* Clear PEC error flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR); + } + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Store current volatile hsmbus->ErrorCode, misra rule */ + tmperror = hsmbus->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror != HAL_SMBUS_ERROR_NONE) && (tmperror != HAL_SMBUS_ERROR_ACKF)) + { + /* Do not Reset the HAL state in case of ALERT error */ + if ((tmperror & HAL_SMBUS_ERROR_ALERT) != HAL_SMBUS_ERROR_ALERT) + { + /* Store current volatile hsmbus->State, misra rule */ + tmpstate = hsmbus->State; + + if (((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + || ((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)) + { + /* Reset only HAL_SMBUS_STATE_SLAVE_BUSY_XX */ + /* keep HAL_SMBUS_STATE_LISTEN if set */ + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + } + } + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle SMBUS Communication Timeout. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param Flag Specifies the SMBUS flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + while ((FlagStatus)(__HAL_SMBUS_GET_FLAG(hsmbus, Flag)) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + } + } + + return HAL_OK; +} + +/** + * @brief SMBUS Tx data register flush process. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXIS) != RESET) + { + hsmbus->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXE) == RESET) + { + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TXE); + } +} + +/** + * @brief Handle SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hsmbus SMBUS handle. + * @param DevAddress specifies the slave address to be programmed. + * @param Size specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the SMBUS START condition generation. + * This parameter can be one or a combination of the following values: + * @arg @ref SMBUS_RELOAD_MODE Enable Reload mode. + * @arg @ref SMBUS_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref SMBUS_SOFTEND_MODE Enable Software end mode and Reload mode. + * @arg @ref SMBUS_SENDPEC_MODE Enable Packet Error Calculation mode. + * @param Request New state of the SMBUS START condition generation. + * This parameter can be one of the following values: + * @arg @ref SMBUS_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref SMBUS_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref SMBUS_GENERATE_START_READ Generate Restart for read request. + * @arg @ref SMBUS_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_TRANSFER_MODE(Mode)); + assert_param(IS_SMBUS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hsmbus->Instance->CR2, + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Convert SMBUSx OTHER_xxx XferOptions to functional XferOptions. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus) +{ + /* if user set XferOptions to SMBUS_OTHER_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME */ + if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME; + } + /* else if user set XferOptions to SMBUS_OTHER_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE */ + else if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_NO_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_NO_PEC; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC; + } + else + { + /* Nothing to do */ + } +} +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus_ex.c new file mode 100644 index 0000000000..19662b2637 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_smbus_ex.c @@ -0,0 +1,242 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_smbus_ex.c + * @author MCD Application Team + * @brief SMBUS Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of SMBUS Extended peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### SMBUS peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the SMBUS interface for STM32C0xx + devices contains the following additional features + + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + (#) Configure the enable or disable of SMBUS Wake Up Mode using the functions : + (++) HAL_SMBUSEx_EnableWakeUp() + (++) HAL_SMBUSEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_SMBUSEx_EnableFastModePlus() + (++) HAL_SMBUSEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SMBUSEx SMBUSEx + * @brief SMBUS Extended HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @defgroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable SMBUS wakeup from Stop mode(s). + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUSEx_EnableWakeUp(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hsmbus->Instance)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Enable wakeup from stop mode */ + hsmbus->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable SMBUS wakeup from Stop mode(s). + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUSEx_DisableWakeUp(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hsmbus->Instance)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Disable wakeup from stop mode */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SMBUS fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref SMBUSEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using SMBUS_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using SMBUS_FASTMODEPLUS_I2C1 parameter. + * @retval None + */ +void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the SMBUS fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref SMBUSEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using SMBUS_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using SMBUS_FASTMODEPLUS_I2C1 parameter. + * @retval None + */ +void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi.c new file mode 100644 index 0000000000..e2446fd10c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi.c @@ -0,0 +1,4435 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr ++; + hspi->TxXferCount--; + } + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + +error: + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + uint32_t tickstart; + HAL_StatusTypeDef errorcode = HAL_OK; + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + errorcode = HAL_ERROR; + } + +error : + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint16_t initial_RxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + uint32_t spi_cr1; + uint32_t spi_cr2; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; + initial_RxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (initial_RxXferCount > 1U)) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount <= 1U) + { + /* Set RX Fifo threshold before to switch on 8 bit data size */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + errorcode = HAL_TIMEOUT; + goto error; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + errorcode = HAL_TIMEOUT; + goto error; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + + errorcode = HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + errorcode = HAL_ERROR; + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +error : + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + if (hspi->State != HAL_SPI_STATE_READY) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + +error: + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + HAL_StatusTypeDef errorcode = HAL_OK; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + errorcode = HAL_BUSY; + goto error; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + errorcode = HAL_ERROR; + goto error; + } + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + + hspi->State = HAL_SPI_STATE_READY; + goto error; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + +error : + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return errorcode; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Flush Data Register by a blank read */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi_ex.c new file mode 100644 index 0000000000..9ced2ecef7 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_spi_ex.c @@ -0,0 +1,112 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim.c new file mode 100644 index 0000000000..f9292fde59 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim.c @@ -0,0 +1,7895 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup TIM_Private_Constants + * @{ + */ +#define TIMx_OR1_OCREF_CLR 0x00000001U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR1 + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + + /* Clear TIMx_OR1_OCREF_CLR (reset value) */ + CLEAR_BIT(htim->Instance->OR1, TIMx_OR1_OCREF_CLR); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(htim); + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim_ex.c new file mode 100644 index 0000000000..66c66115de --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_tim_ex.c @@ -0,0 +1,2764 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) && (Length > 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Set BREAK AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + } + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set BREAK2 AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) + +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param TISelection specifies the timer input source + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_rtc_alarm_template.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_rtc_alarm_template.c new file mode 100644 index 0000000000..ee6888d684 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_rtc_alarm_template.c @@ -0,0 +1,295 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_timebase_rtc_alarm_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_ALARM Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * to use the RTC ALARM for time base generation: + * + Initializes the RTC peripheral to increment the seconds registers each 1ms + * + The alarm is configured to assert an interrupt when the RTC reaches 1ms + * + HAL_IncTick is called at each Alarm event + * + HSE (default), LSE or LSI can be selected as RTC clock source + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32c0xx_hal_timebase_rtc_alarm.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32c0xx_hal_conf.h + + [..] + (@) HAL RTC alarm driver can not be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32c0xx_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +#define RTC_CLOCK_SOURCE_HSE +/* #define RTC_CLOCK_SOURCE_LSE */ +/* #define RTC_CLOCK_SOURCE_LSI */ + +#ifdef RTC_CLOCK_SOURCE_HSE +#define RTC_ASYNCH_PREDIV 49U +#define RTC_SYNCH_PREDIV 4U +#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ +#define RTC_ASYNCH_PREDIV 0U +#define RTC_SYNCH_PREDIV 31U +#endif /* RTC_CLOCK_SOURCE_HSE */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern RTC_HandleTypeDef hRTC_Handle; +RTC_HandleTypeDef hRTC_Handle; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC_ALARMA as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + __IO uint32_t counter = 0U; + + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + +#ifdef RTC_CLOCK_SOURCE_LSE + /* ConfigureLSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* ConfigureLSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; +#elif defined (RTC_CLOCK_SOURCE_HSE) + /* ConfigureHSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32; +#else +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_LSE */ + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) + { + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) == HAL_OK) + { + /* Enable RTC Clock */ + __HAL_RCC_RTC_ENABLE(); + __HAL_RCC_RTCAPB_CLK_ENABLE(); + + /* The time base should be 1ms + Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + HSE as RTC clock + Time base = ((49 + 1) * (4 + 1)) / 250kHz + = 1ms + LSE as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32.768KHz + = ~1ms + LSI as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32KHz + = 1ms + */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + if (HAL_RTC_Init(&hRTC_Handle) != HAL_OK) + { + return HAL_ERROR; + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(&hRTC_Handle); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF); + + counter = 0U; + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAWF) == 0U) + { + if (counter++ == (SystemCoreClock / 56U)) /* Timeout = ~ 1s */ + { + return HAL_ERROR; + } + } + + hRTC_Handle.Instance->ALRMAR = (uint32_t)0x01U; + + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(&hRTC_Handle); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + + /* RTC Alarm Interrupt Configuration: EXTI configuration */ + __HAL_RTC_ALARM_EXTI_ENABLE_IT(); + + /* Check if the Initialization mode is set */ + if ((hRTC_Handle.Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) + { + /* Set the Initialization mode */ + hRTC_Handle.Instance->ICSR = (uint32_t)RTC_INIT_MASK; + counter = 0U; + while ((hRTC_Handle.Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) + { + if (counter++ == (SystemCoreClock / 56U)) /* Timeout = ~ 1s */ + { + return HAL_ERROR; + } + } + } + hRTC_Handle.Instance->DR = 0U; + hRTC_Handle.Instance->TR = 0U; + + hRTC_Handle.Instance->ICSR &= (uint32_t)~RTC_ICSR_INIT; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); + + HAL_NVIC_SetPriority(RTC_IRQn, TickPriority, 0U); + HAL_NVIC_EnableIRQ(RTC_IRQn); + return HAL_OK; + } + } + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC ALARM interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable RTC ALARM update Interrupt */ + __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC ALARM interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable RTC ALARM Update interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief ALARM A Event Callback in non blocking mode + * @note This function is called when RTC_ALARM interrupt took place, inside + * RTC_ALARM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc : RTC handle + * @retval None + */ +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + __IO uint32_t counter = 0U; + + HAL_IncTick(); + + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the Initialization mode */ + hrtc->Instance->ICSR = (uint32_t)RTC_INIT_MASK; + + while ((hrtc->Instance->ICSR & RTC_ICSR_INITF) == (uint32_t)RESET) + { + if (counter++ == (SystemCoreClock / 56U)) /* Timeout = ~ 1s */ + { + break; + } + } + + hrtc->Instance->DR = 0U; + hrtc->Instance->TR = 0U; + + hrtc->Instance->ICSR &= (uint32_t)~RTC_ICSR_INIT; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief This function handles RTC ALARM interrupt request. + * @retval None + */ +void RTC_IRQHandler(void) +{ + HAL_RTC_AlarmIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_tim_template.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_tim_template.c new file mode 100644 index 0000000000..65a904da46 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_timebase_tim_template.c @@ -0,0 +1,176 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_timebase_tim_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware TIM. + * + * This file overrides the native HAL time base functions (defined as weak) + * the TIM time base: + * + Initializes the TIM peripheral to generate a Period elapsed Event each 1ms + * + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32c0xx_hal_timebase_tim.c' + (#) Add this file and the TIM HAL drivers to your project and uncomment + HAL_TIM_MODULE_ENABLED define in stm32c0xx_hal_conf.h + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL_TimeBase_TIM + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern TIM_HandleTypeDef TimHandle; +TIM_HandleTypeDef TimHandle; +/* Private function prototypes -----------------------------------------------*/ +void TIM3_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the TIM3 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + RCC_ClkInitTypeDef clkconfig; + uint32_t uwTimclock, uwAPB1Prescaler; + uint32_t uwPrescalerValue; + uint32_t pFLatency; + + /*Configure the TIM3 IRQ priority */ + HAL_NVIC_SetPriority(TIM3_IRQn, TickPriority, 0U); + + /* Enable the TIM3 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM3_IRQn); + + /* Enable TIM3 clock */ + __HAL_RCC_TIM3_CLK_ENABLE(); + + /* Get clock configuration */ + HAL_RCC_GetClockConfig(&clkconfig, &pFLatency); + + /* Get APB1 prescaler */ + uwAPB1Prescaler = clkconfig.APB1CLKDivider; + + /* Compute TIM3 clock */ + if (uwAPB1Prescaler == RCC_HCLK_DIV1) + { + uwTimclock = HAL_RCC_GetPCLK1Freq(); + } + else + { + uwTimclock = 2U * HAL_RCC_GetPCLK1Freq(); + } + + /* Compute the prescaler value to have TIM3 counter clock equal to 1MHz */ + uwPrescalerValue = (uint32_t)((uwTimclock / 1000000U) - 1U); + + /* Initialize TIM3 */ + TimHandle.Instance = TIM3; + + /* Initialize TIMx peripheral as follow: + + Period = [(TIM3CLK/1000) - 1]. to have a (1/1000) s time base. + + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock. + + ClockDivision = 0 + + Counter direction = Up + */ + TimHandle.Init.Period = (1000000U / 1000U) - 1U; + TimHandle.Init.Prescaler = uwPrescalerValue; + TimHandle.Init.ClockDivision = 0U; + TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&TimHandle) == HAL_OK) + { + /* Start the TIM time Base generation in interrupt mode */ + return HAL_TIM_Base_Start_IT(&TimHandle); + } + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling TIM3 update interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable TIM3 update interrupt */ + __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by enabling TIM3 update interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Enable TIM3 update interrupt */ + __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM3 interrupt took place, inside + * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles TIM interrupt request. + * @retval None + */ +void TIM3_IRQHandler(void) +{ + HAL_TIM_IRQHandler(&TimHandle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart.c new file mode 100644 index 0000000000..11ff3be7ab --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart.c @@ -0,0 +1,4612 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(huart->Instance)); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used instead of the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + __HAL_LOCK(huart); + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + __HAL_UNLOCK(huart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + __HAL_LOCK(huart); + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + tmpreg |= huart->Init.OneBitSampling; + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart_ex.c new file mode 100644 index 0000000000..c1c7c9317e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_uart_ex.c @@ -0,0 +1,1065 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper + * alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart.c new file mode 100644 index 0000000000..8a99c14833 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart.c @@ -0,0 +1,3844 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_usart.c + * @author MCD Application Team + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter + * Peripheral (USART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart). + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure these USART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) USART interrupts handling: + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode + (Receiver/Transmitter) in the husart handle Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_USART_MspInit(&husart) API. + + [..] + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and + HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_USART_RegisterCallback() to register a user callback. + Function HAL_USART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_USART_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. + HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + + [..] + By default, after the HAL_USART_Init() and when the state is HAL_USART_STATE_RESET + all callbacks are set to the corresponding weak (surcharged) functions: + examples HAL_USART_TxCpltCallback(), HAL_USART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (surcharged) functions in the HAL_USART_Init() + and HAL_USART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_USART_Init() and HAL_USART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_USART_RegisterCallback() before calling HAL_USART_DeInit() + or HAL_USART_Init() function. + + [..] + When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak (surcharged) callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */ +#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 | \ + USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by USART_SetConfig API */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | \ + USART_CR2_LBCL | USART_CR2_STOP | USART_CR2_SLVEN | \ + USART_CR2_DIS_NSS)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART or USART CR3 fields of parameters set by USART_SetConfig API */ + +#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */ +#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions + * @{ + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +static void USART_EndTransfer(USART_HandleTypeDef *husart); +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in asynchronous and in synchronous modes. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous configuration + procedure (details for the procedure are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible USART formats are listed in the + following table. + + Table 1. USART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | USART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the USART mode according to the specified + * parameters in the USART_InitTypeDef and initialize the associated handle. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if (husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + USART_InitCallbacksToDefault(husart); + + if (husart->MspInitCallback == NULL) + { + husart->MspInitCallback = HAL_USART_MspInit; + } + + /* Init the low level hardware */ + husart->MspInitCallback(husart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_USART_MspInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* Set the Usart Communication parameters */ + if (USART_SetConfig(husart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register. + */ + husart->Instance->CR2 &= ~USART_CR2_LINEN; + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN); + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* TEACK and/or REACK to check before moving husart->State to Ready */ + return (USART_CheckIdleState(husart)); +} + +/** + * @brief DeInitialize the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + husart->Instance->CR1 = 0x0U; + husart->Instance->CR2 = 0x0U; + husart->Instance->CR3 = 0x0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + if (husart->MspDeInitCallback == NULL) + { + husart->MspDeInitCallback = HAL_USART_MspDeInit; + } + /* DeInit the low level hardware */ + husart->MspDeInitCallback(husart); +#else + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Initialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User USART Callback + * To be used instead of the weak predefined callback + * @param husart usart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status ++ */ +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(husart); + + if (husart->State == HAL_USART_STATE_READY) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = pCallback; + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = pCallback; + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = pCallback; + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = pCallback; + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = pCallback; + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = pCallback; + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = pCallback; + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = pCallback; + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (husart->State == HAL_USART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} + +/** + * @brief Unregister an USART Callback + * USART callaback is redirected to the weak predefined callback + * @param husart usart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(husart); + + if (HAL_USART_STATE_READY == husart->State) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_USART_STATE_RESET == husart->State) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(husart); + + return status; +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART synchronous + data transfers. + + [..] The USART supports master mode only: it cannot receive or send data related to an input + clock (SCLK is always an output). + + [..] + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_USART_Transmit_IT() in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) No-Blocking mode API's with DMA are : + (++) HAL_USART_Transmit_DMA() in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_USART_Abort() + (++) HAL_USART_Abort_IT() + + (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided: + (++) HAL_USART_AbortCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify + error type, and HAL_USART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on USART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_USART_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Simplex send an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout) +{ + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + } + else + { + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + } + + /* Check the remaining data to be sent */ + while (husart->TxXferCount > 0U) + { + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear Transmission Complete Flag */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + + /* At end of Tx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + prxdata16bits = NULL; + } + + /* as long as data have to be received */ + while (husart->RxXferCount > 0U) + { + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Wait until TXE flag is set to send dummy byte in order to generate the + * clock for the slave to send data. + * Whatever the frame length (7, 8 or 9-bit long), the same dummy value + * can be written for all the cases. */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF); + } + + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + + } + + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* At end of Rx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint16_t uhMask; + uint16_t rxdatacount; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + prxdata16bits = NULL; + } + + if ((husart->TxXferCount == 0x01U) || (husart->SlaveMode == USART_SLAVEMODE_ENABLE)) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + /* Check the remain data to be sent */ + /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + rxdatacount = husart->RxXferCount; + while ((husart->TxXferCount > 0U) || (rxdatacount > 0U)) + { + if (husart->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (husart->RxXferCount > 0U) + { + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + } + rxdatacount = husart->RxXferCount; + } + + /* At end of TxRx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->TxISR = NULL; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, noise error, overrun error) + are not managed by the USART Transmit Process to avoid the overrun interrupt + when the usart mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the usart mode should be + configured only for transmit "USART_MODE_TX" */ + + /* Configure Tx interrupt processing */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the TX FIFO threshold interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXFT); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + uint16_t nb_dummy_data; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->RxISR = NULL; + + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Send dummy data in order to generate the clock for the Slave to send the next data. + When FIFO mode is disabled only one data must be transferred. + When FIFO mode is enabled data must be transmitted until the RX FIFO reaches its threshold. + */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + for (nb_dummy_data = husart->NbRxDataToProcess ; nb_dummy_data > 0U ; nb_dummy_data--) + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + else + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits) + * (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Configure TxRx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the TX and RX FIFO Threshold interrupts */ + SET_BIT(husart->Instance->CR3, (USART_CR3_TXFTIE | USART_CR3_RXFTIE)); + } + else + { + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error and USART Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the USART Transmit Data Register Empty Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + const uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + if (husart->hdmatx != NULL) + { + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Enable the USART transmit DMA channel */ + tmp = (const uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the USART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on + * a half word frontier (16 bits) (as received data will be handled by DMA from halfword frontier). + * Depending on compilation chain, use of specific alignment compilation directives or pragmas + * might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp = (uint32_t *)&pRxData; + + /* Check that a Rx process is not already ongoing */ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + } + + if ((status == HAL_OK) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive mode */ + + /* Set the USART DMA Tx Complete and Error callback to Null */ + if (husart->hdmatx != NULL) + { + husart->hdmatx->XferErrorCallback = NULL; + husart->hdmatx->XferHalfCpltCallback = NULL; + husart->hdmatx->XferCpltCallback = NULL; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier + * (16 bits) (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation + * chain, use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef status; + const uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data copy to/from TDR/RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL)) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t *)&pRxData; + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(const uint32_t *)tmp, Size); + + /* Enable the USART transmit DMA channel */ + if (status == HAL_OK) + { + tmp = (const uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + else + { + status = HAL_ERROR; + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) && + (state == HAL_USART_STATE_BUSY_TX)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the USART DMA Rx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if (state == HAL_USART_STATE_BUSY_TX) + { + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART DMA Rx request before the DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() / + HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + /* Abort the USART DMA rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + USART_EndTransfer(husart); + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (husart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback; + } + else + { + husart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (husart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback; + } + else + { + husart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at USART level */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmatx != NULL) + { + /* USART Tx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK) + { + husart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmarx != NULL) + { + /* USART Rx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + husart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle USART interrupt request. + * @param husart USART handle. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t isrflags = READ_REG(husart->Instance->ISR); + uint32_t cr1its = READ_REG(husart->Instance->CR1); + uint32_t cr3its = READ_REG(husart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF | + USART_ISR_UDR)); + if (errorflags == 0U) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* USART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF); + + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + /* USART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF); + + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + /* USART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF); + + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + /* USART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF); + + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + /* USART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_RTOF); + + husart->ErrorCode |= HAL_USART_ERROR_RTO; + } + + /* USART SPI slave underrun error interrupt occurred -------------------------*/ + if (((isrflags & USART_ISR_UDR) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + /* Ignore SPI slave underrun errors when reception is going on */ + if (husart->State == HAL_USART_STATE_BUSY_RX) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + return; + } + else + { + __HAL_USART_CLEAR_UDRFLAG(husart); + husart->ErrorCode |= HAL_USART_ERROR_UDR; + } + } + + /* Call USART Error Call back function if need be --------------------------*/ + if (husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE; + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) || + (errorcode != 0U)) + { + /* Blocking error : transfer is aborted + Set the USART state ready to be able to start again the process, + Disable Interrupts, and disable DMA requests, if ongoing */ + USART_EndTransfer(husart); + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR); + + /* Abort the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + /* Set the USART Tx DMA Abort callback to NULL : no callback + executed at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA TX */ + (void)HAL_DMA_Abort_IT(husart->hdmatx); + } + + /* Abort the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + /* Set the USART Rx DMA Abort callback : + will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */ + husart->hdmarx->XferAbortCallback(husart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + + /* USART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (husart->TxISR != NULL) + { + husart->TxISR(husart); + } + return; + } + + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + USART_EndTransmit_IT(husart); + return; + } + + /* USART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + husart->TxFifoEmptyCallback(husart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_USARTEx_TxFifoEmptyCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } + + /* USART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + husart->RxFifoFullCallback(husart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_USARTEx_RxFifoFullCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief USART Abort Complete callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief USART Peripheral State and Error functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the USART handle state + (+) Return the USART handle error code + +@endverbatim + * @{ + */ + + +/** + * @brief Return the USART handle state. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle Error Code + */ +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param husart USART handle. + * @retval none + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart) +{ + /* Init the USART Callback settings */ + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion). + * @param husart USART handle. + * @retval None + */ +static void USART_EndTransfer(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* At end of process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; +} + +/** + * @brief DMA USART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->TxXferCount = 0U; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_TX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half Complete Callback */ + husart->TxHalfCpltCallback(husart); +#else + /* Call legacy weak Tx Half Complete Callback */ + HAL_USART_TxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit + in USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + /* similarly, disable the DMA TX transfer that was started to provide the + clock to the slave device */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + husart->State = HAL_USART_STATE_READY; + } + /* DMA circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Half Complete Callback */ + husart->RxHalfCpltCallback(husart); +#else + /* Call legacy weak Rx Half Complete Callback */ + HAL_USART_RxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + USART_EndTransfer(husart); + + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmarx != NULL) + { + if (husart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} + + +/** + * @brief DMA USART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmatx != NULL) + { + if (husart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + + +/** + * @brief Handle USART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param husart USART handle. + * @param Flag Specifies the USART flag to check. + * @param Status the actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) +{ + uint32_t tmpreg; + USART_ClockSourceTypeDef clocksource; + HAL_StatusTypeDef ret = HAL_OK; + uint16_t brrtemp; + uint32_t usartdiv = 0x00000000; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + assert_param(IS_USART_PRESCALER(husart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE and RE bits and configure + * the USART Word Length, Parity and Mode: + * set the M bits according to husart->Init.WordLength value + * set PCE and PS bits according to husart->Init.Parity value + * set TE and RE bits according to husart->Init.Mode value + * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */ + tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Clear and configure the USART Clock, CPOL, CPHA, LBCL STOP and SLVEN bits: + * set CPOL bit according to husart->Init.CLKPolarity value + * set CPHA bit according to husart->Init.CLKPhase value + * set LBCL bit according to husart->Init.CLKLastBit value (used in SPI master mode only) + * set STOP[13:12] bits according to husart->Init.StopBits value */ + tmpreg = (uint32_t)(USART_CLOCK_ENABLE); + tmpreg |= (uint32_t)husart->Init.CLKLastBit; + tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase); + tmpreg |= (uint32_t)husart->Init.StopBits; + MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - USART Clock Prescaler : set PRESCALER according to husart->Init.ClockPrescaler value */ + MODIFY_REG(husart->Instance->PRESC, USART_PRESC_PRESCALER, husart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */ + USART_GETCLOCKSOURCE(husart, clocksource); + + switch (clocksource) + { + case USART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_HSI: + pclk = (HSI_VALUE / ((__HAL_RCC_GET_HSIKER_DIVIDER() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + case USART_CLOCKSOURCE_LSE: + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + break; + default: + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */ + if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + husart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + husart->RxISR = NULL; + husart->TxISR = NULL; + + return ret; +} + +/** + * @brief Check the USART Idle State. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart) +{ + uint32_t tickstart; + + /* Initialize the USART ErrorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the USART state*/ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wraps up transmission in non-blocking mode. + * @param husart Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + /* Clear TxISR function pointer */ + husart->TxISR = NULL; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Tx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if (husart->RxXferCount == 0U) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Rx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_8BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_16BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart_ex.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart_ex.c new file mode 100644 index 0000000000..87f2677cd8 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_usart_ex.c @@ -0,0 +1,540 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_usart_ex.c + * @author MCD Application Team + * @brief Extended USART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Synchronous Receiver Transmitter Peripheral (USART). + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### USART peripheral extended features ##### + ============================================================================== + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When USART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + (#) Slave mode enabling/disabling and NSS pin configuration. + + -@- When USART operates in Slave mode, Slave mode must be enabled prior + starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +/** @defgroup USARTEx USARTEx + * @brief USART Extended HAL module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Constants USARTEx Private Constants + * @{ + */ +/* USART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* USART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup USARTEx_Private_Functions USARTEx Private Functions + * @{ + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USARTEx_Exported_Functions USARTEx Exported Functions + * @{ + */ + +/** @defgroup USARTEx_Exported_Functions_Group1 IO operation functions + * @brief Extended USART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (+) HAL_USARTEx_RxFifoFullCallback() + (+) HAL_USARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief USART RX Fifo full callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief USART TX Fifo empty callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USARTEx_Exported_Functions_Group2 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_USARTEx_EnableSPISlaveMode() API enables the SPI slave mode + (+) HAL_USARTEx_DisableSPISlaveMode() API disables the SPI slave mode + (+) HAL_USARTEx_ConfigNSS API configures the Slave Select input pin (NSS) + (+) HAL_USARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_USARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_USARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_USARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SPI slave mode. + * @note When the USART operates in SPI slave mode, it handles data flow using + * the serial interface clock derived from the external SCLK signal + * provided by the external master SPI device. + * @note In SPI slave mode, the USART must be enabled before starting the master + * communications (or between frames while the clock is stable). Otherwise, + * if the USART slave is enabled while the master is in the middle of a + * frame, it will become desynchronized with the master. + * @note The data register of the slave needs to be ready before the first edge + * of the communication clock or before the end of the ongoing communication, + * otherwise the SPI slave will transmit zeros. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* In SPI slave mode mode, the following bits must be kept cleared: + - LINEN and CLKEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(husart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable SPI slave mode */ + SET_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_ENABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Enable USART */ + __HAL_USART_ENABLE(husart); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the SPI slave mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Disable SPI slave mode */ + CLEAR_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_DISABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Configure the Slave Select input pin (NSS). + * @note Software NSS management: SPI slave will always be selected and NSS + * input pin will be ignored. + * @note Hardware NSS management: the SPI slave selection depends on NSS + * input pin. The slave is selected when NSS is low and deselected when + * NSS is high. + * @param husart USART handle. + * @param NSSConfig NSS configuration. + * This parameter can be one of the following values: + * @arg @ref USART_NSS_HARD + * @arg @ref USART_NSS_SOFT + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + assert_param(IS_USART_NSS(NSSConfig)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Program DIS_NSS bit in the USART_CR2 register */ + MODIFY_REG(husart->Instance->CR2, USART_CR2_DIS_NSS, NSSConfig); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_ENABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_DISABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param husart USART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_TXFIFO_THRESHOLD_1_8 + * @arg @ref USART_TXFIFO_THRESHOLD_1_4 + * @arg @ref USART_TXFIFO_THRESHOLD_1_2 + * @arg @ref USART_TXFIFO_THRESHOLD_3_4 + * @arg @ref USART_TXFIFO_THRESHOLD_7_8 + * @arg @ref USART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update TX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param husart USART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_RXFIFO_THRESHOLD_1_8 + * @arg @ref USART_RXFIFO_THRESHOLD_1_4 + * @arg @ref USART_RXFIFO_THRESHOLD_1_2 + * @arg @ref USART_RXFIFO_THRESHOLD_3_4 + * @arg @ref USART_RXFIFO_THRESHOLD_7_8 + * @arg @ref USART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update RX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USARTEx_Private_Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param husart USART handle. + * @retval None + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (husart->FifoMode == USART_FIFOMODE_DISABLE) + { + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU); + tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU); + husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_wwdg.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_wwdg.c new file mode 100644 index 0000000000..b8e53e08b4 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_wwdg.c @@ -0,0 +1,420 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_wwdg.c + * @author MCD Application Team + * @brief WWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Window Watchdog (WWDG) peripheral: + * + Initialization and Configuration functions + * + IO operation functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### WWDG Specific features ##### + ============================================================================== + [..] + Once enabled the WWDG generates a system reset on expiry of a programmed + time period, unless the program refreshes the counter (T[6;0] downcounter) + before reaching 0x3F value (i.e. a reset is generated when the counter + value rolls down from 0x40 to 0x3F). + + (+) An MCU reset is also generated if the counter value is refreshed + before the counter has reached the refresh window value. This + implies that the counter must be refreshed in a limited window. + (+) Once enabled the WWDG cannot be disabled except by a system reset. + (+) If required by application, an Early Wakeup Interrupt can be triggered + in order to be warned before WWDG expiration. The Early Wakeup Interrupt + (EWI) can be used if specific safety operations or data logging must + be performed before the actual reset is generated. When the downcounter + reaches 0x40, interrupt occurs. This mechanism requires WWDG interrupt + line to be enabled in NVIC. Once enabled, EWI interrupt cannot be + disabled except by a system reset. + (+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG + reset occurs. + (+) The WWDG counter input clock is derived from the APB clock divided + by a programmable prescaler. + (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler) + (+) WWDG timeout (mS) = 1000 * (T[5;0] + 1) / WWDG clock (Hz) + where T[5;0] are the lowest 6 bits of Counter. + (+) WWDG Counter refresh is allowed between the following limits : + (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock + (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock + (+) Typical values: + (++) Counter min (T[5;0] = 0x00) at 32MHz (PCLK1) with zero prescaler: + max timeout before reset: approximately 41.79us + (++) Counter max (T[5;0] = 0x3F) at 32MHz (PCLK1) with prescaler + dividing by 128: + max timeout before reset: approximately 342.38ms + + ##### How to use this driver ##### + ============================================================================== + + *** Common driver usage *** + =========================== + + [..] + (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). + (+) Configure the WWDG prescaler, refresh window value, counter value and early + interrupt status using HAL_WWDG_Init() function. This will automatically + enable WWDG and start its downcounter. Time reference can be taken from + function exit. Care must be taken to provide a counter value + greater than 0x40 to prevent generation of immediate reset. + (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is + generated when the counter reaches 0x40. When HAL_WWDG_IRQHandler is + triggered by the interrupt service routine, flag will be automatically + cleared and HAL_WWDG_WakeupCallback user callback will be executed. User + can add his own code by customization of callback HAL_WWDG_WakeupCallback. + (+) Then the application program must refresh the WWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_WWDG_Refresh() function. This operation must occur only when + the counter is lower than the refresh window value already programmed. + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows + the user to configure dynamically the driver callbacks. Use Functions + HAL_WWDG_RegisterCallback() to register a user callback. + + (+) Function HAL_WWDG_RegisterCallback() allows to register following + callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + (+) Use function HAL_WWDG_UnRegisterCallback() to reset a callback to + the default weak (surcharged) function. HAL_WWDG_UnRegisterCallback() + takes as parameters the HAL peripheral handle and the Callback ID. + This function allows to reset following callbacks: + (++) EwiCallback : callback for Early WakeUp Interrupt. + (++) MspInitCallback : WWDG MspInit. + + [..] + When calling HAL_WWDG_Init function, callbacks are reset to the + corresponding legacy weak (surcharged) functions: + HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have + not been registered before. + + [..] + When compilation define USE_HAL_WWDG_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + *** WWDG HAL driver macros list *** + =================================== + [..] + Below the list of available macros in WWDG HAL driver. + (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral + (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status + (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags + (+) __HAL_WWDG_ENABLE_IT: Enable the WWDG early wakeup interrupt + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_hal.h" + +/** @addtogroup STM32C0xx_HAL_Driver + * @{ + */ + +#ifdef HAL_WWDG_MODULE_ENABLED +/** @defgroup WWDG WWDG + * @brief WWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup WWDG_Exported_Functions WWDG Exported Functions + * @{ + */ + +/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions. + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and start the WWDG according to the specified parameters + in the WWDG_InitTypeDef of associated handle. + (+) Initialize the WWDG MSP. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the WWDG according to the specified. + * parameters in the WWDG_InitTypeDef of associated handle. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) +{ + /* Check the WWDG handle allocation */ + if (hwwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); + assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); + assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); + assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); + assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode)); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers */ + if (hwwdg->EwiCallback == NULL) + { + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + } + + if (hwwdg->MspInitCallback == NULL) + { + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + } + + /* Init the low level hardware */ + hwwdg->MspInitCallback(hwwdg); +#else + /* Init the low level hardware */ + HAL_WWDG_MspInit(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + + /* Set WWDG Counter */ + WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter)); + + /* Set WWDG Prescaler and Window */ + WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window)); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Initialize the WWDG MSP. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @note When rewriting this function in user file, mechanism may be added + * to avoid multiple initialize when HAL_WWDG_Init function is called + * again to change parameters. + * @retval None + */ +__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_MspInit could be implemented in the user file + */ +} + + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User WWDG Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + status = HAL_ERROR; + } + else + { + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = pCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + + return status; +} + + +/** + * @brief Unregister a WWDG Callback + * WWDG Callback is redirected to the weak (surcharged) predefined callback + * @param hwwdg WWDG handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID + * @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_WWDG_EWI_CB_ID: + hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; + break; + + case HAL_WWDG_MSPINIT_CB_ID: + hwwdg->MspInitCallback = HAL_WWDG_MspInit; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Refresh the WWDG. + (+) Handle WWDG interrupt request and associated function callback. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the WWDG. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg) +{ + /* Write to WWDG CR the WWDG Counter value to refresh with */ + WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter)); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handle WWDG interrupt request. + * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations + * or data logging must be performed before the actual reset is generated. + * The EWI interrupt is enabled by calling HAL_WWDG_Init function with + * EWIMode set to WWDG_EWI_ENABLE. + * When the downcounter reaches the value 0x40, and EWI interrupt is + * generated and the corresponding Interrupt Service Routine (ISR) can + * be used to trigger specific actions (such as communications or data + * logging), before resetting the device. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) +{ + /* Check if Early Wakeup Interrupt is enable */ + if (__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) + { + /* Check if WWDG Early Wakeup Interrupt occurred */ + if (__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) + { + /* Clear the WWDG Early Wakeup flag */ + __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); + +#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) + /* Early Wakeup registered callback */ + hwwdg->EwiCallback(hwwdg); +#else + /* Early Wakeup callback */ + HAL_WWDG_EarlyWakeupCallback(hwwdg); +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ + } + } +} + + +/** + * @brief WWDG Early Wakeup callback. + * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains + * the configuration information for the specified WWDG module. + * @retval None + */ +__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hwwdg); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_WWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_adc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_adc.c new file mode 100644 index 0000000000..ce6f280f6a --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_adc.c @@ -0,0 +1,751 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_adc.c + * @author MCD Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_adc.h" +#include "stm32c0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +/* Definitions of ADC hardware constraints delays */ +/* Note: Only ADC peripheral HW delays are defined in ADC LL driver driver, */ +/* not timeout values: */ +/* Timeout values for ADC operations are dependent to device clock */ +/* configuration (system clock versus ADC clock), */ +/* and therefore must be defined in user application. */ +/* Refer to @ref ADC_LL_EC_HW_DELAYS for description of ADC timeout */ +/* values definition. */ +/* Note: ADC timeout values are defined here in CPU cycles to be independent */ +/* of device clock setting. */ +/* In user application, ADC timeout values should be defined with */ +/* temporal values, in function of device clock settings. */ +/* Highest ratio CPU clock frequency vs ADC clock frequency: */ +/* - ADC clock from synchronous clock with AHB prescaler 512, */ +/* APB prescaler 16, ADC prescaler 4. */ +/* - ADC clock from asynchronous clock (HSI) with prescaler 1, */ +/* with highest ratio CPU clock frequency vs HSI clock frequency: */ +/* CPU clock frequency max 48MHz, HSI frequency 16MHz: ratio 4. */ +/* Unit: CPU cycles. */ +#define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (512UL * 16UL * 4UL) +#define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +/* Note: CCRDY handshake requires 1APB + 2 ADC + 3 APB cycles */ +/* after the channel configuration has been changed. */ +/* Driver timeout is approximated to 6 CPU cycles. */ +#define ADC_TIMEOUT_CCRDY_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 6UL) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* common to several ADC instances. */ +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) + +#define IS_LL_ADC_CLOCK_FREQ_MODE(__CLOCK_FREQ_MODE__) \ + (((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_HIGH) \ + || ((__CLOCK_FREQ_MODE__) == LL_ADC_CLOCK_FREQ_MODE_LOW) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_CLOCK(__CLOCK__) \ + (((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC) \ + ) + +#define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ + (((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ + || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ + ) + +#define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ + (((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ + || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ + ) + +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + (((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF) \ + ) + +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC group regular */ +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + (((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ + (((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ + || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ + ) + +#define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ + (((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ + || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ + ) + +#define IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(__REG_OVR_DATA_BEHAVIOR__) \ + (((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_PRESERVED) \ + || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ + ) + +#define IS_LL_ADC_REG_SEQ_MODE(__REG_SEQ_MODE__) \ + (((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_FIXED) \ + || ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_CONFIGURABLE) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + (((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + ) + +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + (((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of all ADC instances belonging to + * the same ADC common instance to their default reset values. + * @note This function is performing a hard reset, using high level + * clock source RCC ADC reset. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) +{ + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); + + return SUCCESS; +} + +/** + * @brief Initialize some features of ADC common parameters + * (all ADC instances belonging to the same ADC common instance) + * and multimode (for devices with several ADC instances available). + * @note The setting of ADC common parameters is conditioned to + * ADC instances state: + * All ADC instances belonging to the same ADC common instance + * must be disabled. + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC common registers are initialized + * - ERROR: ADC common registers are not initialized + */ +ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); + assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); + + /* Note: Hardware constraint (refer to description of functions */ + /* "LL_ADC_SetCommonXXX()": */ + /* On this STM32 series, setting of these features is conditioned to */ + /* ADC state: */ + /* All ADC instances of the ADC common group must be disabled. */ + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - common to several ADC */ + /* (all ADC instances belonging to the same ADC common instance) */ + /* - Set ADC clock (conversion clock) */ + LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); + } + else + { + /* Initialization error: One or several ADC instances belonging to */ + /* the same ADC common instance are not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. + * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) +{ + /* Set ADC_CommonInitStruct fields to default values */ + /* Set fields of ADC common */ + /* (all ADC instances belonging to the same ADC common instance) */ + ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; + +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note To reset all ADC instances quickly (perform a hard reset), + * use function @ref LL_ADC_CommonDeInit(). + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * Refer to function @ref LL_ADC_CommonDeInit(). + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + __IO uint32_t timeout_cpu_cycles = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* Disable ADC instance if not already disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 1UL) + { + /* Set ADC group regular trigger source to SW start to ensure to not */ + /* have an external trigger event occurring during the conversion stop */ + /* ADC disable process. */ + LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); + + /* Stop potential ADC conversion on going on ADC group regular. */ + if (LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) + { + if (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) + { + LL_ADC_REG_StopConversion(ADCx); + } + } + + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Disable the ADC instance */ + LL_ADC_Disable(ADCx); + + /* Wait for ADC instance is effectively disabled */ + timeout_cpu_cycles = ADC_TIMEOUT_DISABLE_CPU_CYCLES; + while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + } + + /* Check whether ADC state is compliant with expected state */ + if (READ_BIT(ADCx->CR, + (ADC_CR_ADSTP | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) + { + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + CLEAR_BIT(ADCx->IER, + (LL_ADC_IT_ADRDY + | LL_ADC_IT_EOC + | LL_ADC_IT_EOS + | LL_ADC_IT_OVR + | LL_ADC_IT_EOSMP + | LL_ADC_IT_AWD1 + | LL_ADC_IT_AWD2 + | LL_ADC_IT_AWD3 + | LL_ADC_IT_EOCAL + | LL_ADC_IT_CCRDY + ) + ); + + /* Reset register ISR */ + SET_BIT(ADCx->ISR, + (LL_ADC_FLAG_ADRDY + | LL_ADC_FLAG_EOC + | LL_ADC_FLAG_EOS + | LL_ADC_FLAG_OVR + | LL_ADC_FLAG_EOSMP + | LL_ADC_FLAG_AWD1 + | LL_ADC_FLAG_AWD2 + | LL_ADC_FLAG_AWD3 + | LL_ADC_FLAG_EOCAL + | LL_ADC_FLAG_CCRDY + ) + ); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN); + + /* Reset register CFGR1 */ + CLEAR_BIT(ADCx->CFGR1, + (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN + | ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD + | ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES + | ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) + ); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + CLEAR_BIT(ADCx->CFGR2, + (ADC_CFGR2_CKMODE + | ADC_CFGR2_TOVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR + | ADC_CFGR2_OVSE) + ); + + /* Reset register SMPR */ + CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); + + /* Reset register TR1 */ + MODIFY_REG(ADCx->TR1, ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + + /* Reset register TR2 */ + MODIFY_REG(ADCx->TR2, ADC_TR2_HT2 | ADC_TR2_LT2, ADC_TR2_HT2); + + /* Reset register TR3 */ + MODIFY_REG(ADCx->TR3, ADC_TR3_HT3 | ADC_TR3_LT3, ADC_TR3_HT3); + + /* Reset register CHSELR */ + CLEAR_BIT(ADCx->CHSELR, + (ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 + | ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 + | ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 + | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 + | ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0) + ); + + /* Wait for ADC channel configuration ready */ + timeout_cpu_cycles = ADC_TIMEOUT_CCRDY_CPU_CYCLES; + while (LL_ADC_IsActiveFlag_CCRDY(ADCx) == 0UL) + { + timeout_cpu_cycles--; + if (timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Clear flag ADC channel configuration ready */ + LL_ADC_ClearFlag_CCRDY(ADCx); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT); + + } + else + { + /* ADC instance is in an unknown state */ + /* Need to performing a hard reset of ADC instance, using high level */ + /* clock source RCC ADC reset. */ + /* Caution: On this STM32 series, if several ADC instances are available */ + /* on the selected device, RCC ADC reset will reset */ + /* all ADC instances belonging to the common ADC instance. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Instance . + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note After using this function, some other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_CLOCK(ADC_InitStruct->Clock)); + assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); + assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); + assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC data resolution */ + /* - Set ADC conversion data alignment */ + /* - Set ADC low power mode */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_RES + | ADC_CFGR1_ALIGN + | ADC_CFGR1_WAIT + | ADC_CFGR1_AUTOFF + , + ADC_InitStruct->Resolution + | ADC_InitStruct->DataAlignment + | ADC_InitStruct->LowPowerMode + ); + + MODIFY_REG(ADCx->CFGR2, + ADC_CFGR2_CKMODE + , + ADC_InitStruct->Clock + ); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_ADC_InitTypeDef field to default value. + * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) +{ + /* Set ADC_InitStruct fields to default values */ + /* Set fields of ADC instance */ + ADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; + ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; + ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; + ADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; + +} + +/** + * @brief Initialize some features of ADC group regular. + * @note These parameters have an impact on ADC scope: ADC group regular. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC_Group_Regular + * (functions with prefix "REG"). + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @note Before using this function, ADC group regular sequencer + * must be configured: refer to function + * @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note After using this function, other features must be configured + * using LL unitary functions. + * The minimum configuration remaining to be done is: + * - Set ADC group regular sequencer: + * Depending on the sequencer mode (refer to + * function @ref LL_ADC_REG_SetSequencerConfigurable() ): + * - map channel on the selected sequencer rank. + * Refer to function @ref LL_ADC_REG_SetSequencerRanks(); + * - map channel on rank corresponding to channel number. + * Refer to function @ref LL_ADC_REG_SetSequencerChannels(); + * - Set ADC channel sampling time + * Refer to function LL_ADC_SetSamplingTimeCommonChannels(); + * Refer to function LL_ADC_SetChannelSamplingTime(); + * @param ADCx ADC instance + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); + assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); + assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); + assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun)); + + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); + } + + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC group regular */ + /* - Set ADC group regular trigger source */ + /* - Set ADC group regular sequencer length */ + /* - Set ADC group regular sequencer discontinuous mode */ + /* - Set ADC group regular continuous mode */ + /* - Set ADC group regular conversion data transfer: no transfer or */ + /* transfer by DMA, and DMA requests mode */ + /* - Set ADC group regular overrun behavior */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + /* Case of sequencer mode fixed + or sequencer length >= 2 ranks with sequencer mode fully configurable: + discontinuous mode configured */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | ADC_REG_InitStruct->SequencerDiscont + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + else + { + /* Case of sequencer mode fully configurable + and sequencer length 1 rank (sequencer disabled): + discontinuous mode discarded (fixed to disable) */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + + /* Set ADC group regular sequencer length */ + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); + } + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. + * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) +{ + /* Set ADC_REG_InitStruct fields to default values */ + /* Set fields of ADC group regular */ + /* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */ + /* setting of trigger source to SW start. */ + ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; + ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; + ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; + ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; + ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; + ADC_REG_InitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_crc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_crc.c new file mode 100644 index 0000000000..3f07530cf2 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_crc.c @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_crc.c + * @author MCD Application Team + * @brief CRC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_crc.h" +#include "stm32c0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (CRC) + +/** @addtogroup CRC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize CRC registers (Registers restored to their default values). + * @param CRCx CRC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRC registers are de-initialized + * - ERROR: CRC registers are not de-initialized + */ +ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(CRCx)); + + if (CRCx == CRC) + { + /* Force CRC reset */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC); + + /* Release CRC reset */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (CRC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_dma.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_dma.c new file mode 100644 index 0000000000..3f0cf6f241 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_dma.c @@ -0,0 +1,296 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_dma.h" +#include "stm32c0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (DMA1) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + + +#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= LL_DMAMUX_REQ_USART2_TX) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3)))) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); + } + else + { + status = ERROR; + } + } + else + { + DMA_Channel_TypeDef *tmp; + + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Disable the selected DMAx_Channely */ + CLEAR_BIT(tmp->CCR, DMA_CCR_EN); + + /* Reset DMAx_Channely control register */ + WRITE_REG(tmp->CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + WRITE_REG(tmp->CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + WRITE_REG(tmp->CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + WRITE_REG(tmp->CMAR, 0U); + + /* Reset Request register field for DMAx Channel */ + LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + /*--------------------------- DMAMUXx CCR Configuration ---------------------- + * Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter : + * - PeriphRequest: DMA_CxCR[7:0] bits + */ + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_exti.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_exti.c new file mode 100644 index 0000000000..50af5587c6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_exti.c @@ -0,0 +1,212 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_exti.c + * @author MCD Application Team + * @brief EXTI LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_exti.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Private_Macros + * @{ + */ + +#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U) + +#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \ + || ((__VALUE__) == LL_EXTI_MODE_EVENT) \ + || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT)) + + +#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup EXTI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the EXTI registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_EXTI_DeInit(void) +{ + /* Interrupt mask register set to default reset values */ + LL_EXTI_WriteReg(IMR1, 0xFFF80000U); + /* Event mask register set to default reset values */ + LL_EXTI_WriteReg(EMR1, 0x00000000U); + /* Rising Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(RTSR1, 0x00000000U); + /* Falling Trigger selection register set to default reset values */ + LL_EXTI_WriteReg(FTSR1, 0x00000000U); + /* Software interrupt event register set to default reset values */ + LL_EXTI_WriteReg(SWIER1, 0x00000000U); + /* Pending register set to default reset values */ + LL_EXTI_WriteReg(RPR1, 0x0007FFFFU); + LL_EXTI_WriteReg(FPR1, 0x0007FFFFU); + return SUCCESS; +} + +/** + * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct. + * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: EXTI registers are initialized + * - ERROR: not applicable + */ +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + ErrorStatus status = SUCCESS; + /* Check the parameters */ + assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand)); + assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode)); + + /* ENABLE LineCommand */ + if (EXTI_InitStruct->LineCommand != DISABLE) + { + assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger)); + + /* Configure EXTI Lines in range from 0 to 31 */ + if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE) + { + switch (EXTI_InitStruct->Mode) + { + case LL_EXTI_MODE_IT: + /* First Disable Event on provided Lines */ + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable IT on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_EVENT: + /* First Disable IT on provided Lines */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Event on provided Lines */ + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_MODE_IT_EVENT: + /* Directly Enable IT & Event on provided Lines */ + LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (EXTI_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING: + /* First Disable Falling Trigger on provided Lines */ + LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Rising Trigger on provided Lines */ + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_FALLING: + /* First Disable Rising Trigger on provided Lines */ + LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + /* Then Enable Falling Trigger on provided Lines */ + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + case LL_EXTI_TRIGGER_RISING_FALLING: + LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31); + break; + default: + status = ERROR; + break; + } + } + } + + } + /* DISABLE LineCommand */ + else + { + /* De-configure EXTI Lines in range from 0 to 31 */ + LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31); + LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31); + } + return status; +} +/** + * @brief Set each @ref LL_EXTI_InitTypeDef field to default value. + * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure. + * @retval None + */ +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct) +{ + EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE; + + EXTI_InitStruct->LineCommand = DISABLE; + EXTI_InitStruct->Mode = LL_EXTI_MODE_IT; + EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (EXTI) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_gpio.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_gpio.c new file mode 100644 index 0000000000..acd124ae16 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_gpio.c @@ -0,0 +1,260 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_gpio.c + * @author MCD Application Team + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_gpio.h" +#include "stm32c0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOF) + +/** @addtogroup GPIO_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ +#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ + ((__VALUE__) == LL_GPIO_MODE_ANALOG)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP) ||\ + ((__VALUE__) == LL_GPIO_PULL_DOWN)) + +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 ) ||\ + ((__VALUE__) == LL_GPIO_AF_8 ) ||\ + ((__VALUE__) == LL_GPIO_AF_9 ) ||\ + ((__VALUE__) == LL_GPIO_AF_10 ) ||\ + ((__VALUE__) == LL_GPIO_AF_11 ) ||\ + ((__VALUE__) == LL_GPIO_AF_12 ) ||\ + ((__VALUE__) == LL_GPIO_AF_13 ) ||\ + ((__VALUE__) == LL_GPIO_AF_14 ) ||\ + ((__VALUE__) == LL_GPIO_AF_15 )) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOA); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOB); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOB); + } + else if (GPIOx == GPIOC) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOC); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOC); + } +#if defined(GPIOD) + else if (GPIOx == GPIOD) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOD); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOD); + } +#endif /* GPIOD */ + else if (GPIOx == GPIOF) + { + LL_IOP_GRP1_ForceReset(LL_IOP_GRP1_PERIPH_GPIOF); + LL_IOP_GRP1_ReleaseReset(LL_IOP_GRP1_PERIPH_GPIOF); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinpos; + uint32_t currentpin; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + pinpos = POSITION_VAL(GPIO_InitStruct->Pin); + + /* Configure the port pins */ + while (((GPIO_InitStruct->Pin) >> pinpos) != 0U) + { + /* Get current io position */ + currentpin = (GPIO_InitStruct->Pin) & (1UL << pinpos); + + if (currentpin != 0U) + { + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Speed mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + } + + /* Pull-up Pull down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) + { + /* Check Alternate parameter */ + assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); + + /* Speed mode configuration */ + if (POSITION_VAL(currentpin) < 8U) + { + LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + else + { + LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + } + } + pinpos++; + } + + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType); + + } + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct: pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct->Alternate = LL_GPIO_AF_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOF) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_i2c.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_i2c.c new file mode 100644 index 0000000000..60dccd778b --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_i2c.c @@ -0,0 +1,215 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_i2c.c + * @author MCD Application Team + * @brief I2C LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_i2c.h" +#include "stm32c0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (I2C1) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_LL_Private_Macros + * @{ + */ + +#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP)) + +#define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \ + ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE)) + +#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU) + +#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU) + +#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \ + ((__VALUE__) == LL_I2C_NACK)) + +#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \ + ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the I2C registers to their default reset values. + * @param I2Cx I2C Instance. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are de-initialized + * - ERROR: I2C registers are not de-initialized + */ +ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx) +{ + ErrorStatus status = SUCCESS; + + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + if (I2Cx == I2C1) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct. + * @param I2Cx I2C Instance. + * @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + /* Check the I2C parameters from I2C_InitStruct */ + assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode)); + assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter)); + assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter)); + assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1)); + assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge)); + assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize)); + + /* Disable the selected I2Cx Peripheral */ + LL_I2C_Disable(I2Cx); + + /*---------------------------- I2Cx CR1 Configuration ------------------------ + * Configure the analog and digital noise filters with parameters : + * - AnalogFilter: I2C_CR1_ANFOFF bit + * - DigitalFilter: I2C_CR1_DNF[3:0] bits + */ + LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter); + + /*---------------------------- I2Cx TIMINGR Configuration -------------------- + * Configure the SDA setup, hold time and the SCL high, low period with parameter : + * - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0], + * I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits + */ + LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing); + + /* Enable the selected I2Cx Peripheral */ + LL_I2C_Enable(I2Cx); + + /*---------------------------- I2Cx OAR1 Configuration ----------------------- + * Disable, Configure and Enable I2Cx device own address 1 with parameters : + * - OwnAddress1: I2C_OAR1_OA1[9:0] bits + * - OwnAddrSize: I2C_OAR1_OA1MODE bit + */ + LL_I2C_DisableOwnAddress1(I2Cx); + LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize); + + /* OwnAdress1 == 0 is reserved for General Call address */ + if (I2C_InitStruct->OwnAddress1 != 0U) + { + LL_I2C_EnableOwnAddress1(I2Cx); + } + + /*---------------------------- I2Cx MODE Configuration ----------------------- + * Configure I2Cx peripheral mode with parameter : + * - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits + */ + LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode); + + /*---------------------------- I2Cx CR2 Configuration ------------------------ + * Configure the ACKnowledge or Non ACKnowledge condition + * after the address receive match code or next received byte with parameter : + * - TypeAcknowledge: I2C_CR2_NACK bit + */ + LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_I2C_InitTypeDef field to default value. + * @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval None + */ +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Set I2C_InitStruct fields to default values */ + I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C; + I2C_InitStruct->Timing = 0U; + I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE; + I2C_InitStruct->DigitalFilter = 0U; + I2C_InitStruct->OwnAddress1 = 0U; + I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK; + I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_pwr.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_pwr.c new file mode 100644 index 0000000000..a78a541d05 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_pwr.c @@ -0,0 +1,82 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_pwr.c + * @author MCD Application Team + * @brief PWR LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_pwr.h" +#include "stm32c0xx_ll_bus.h" + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_LL_Exported_Functions + * @{ + */ + +/** @addtogroup PWR_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the PWR registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PWR registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_PWR_DeInit(void) +{ + /* Force reset of PWR clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR); + + /* Release reset of PWR clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR); + + return SUCCESS; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined(PWR) */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rcc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rcc.c new file mode 100644 index 0000000000..c1ef0f7ca6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rcc.c @@ -0,0 +1,438 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE) +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) +#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency); +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +uint32_t RCC_PLL_GetFreqDomain_SYS(void); +uint32_t RCC_PLL_GetFreqDomain_ADC(void); +uint32_t RCC_PLL_GetFreqDomain_I2S1(void); +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE OFF + * - AHB and APB1 prescaler set to 1. + * - CSS, MCO OFF + * - All interrupts disabled + * @note This function does not modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + /* Set HSION bit and wait for HSI READY bit */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1U) + {} + + /* Set HSITRIM bits to reset value*/ + LL_RCC_HSI_SetCalibTrimming(0x40U); + + /* Reset CFGR register */ + LL_RCC_WriteReg(CFGR, 0x00000000U); + + /* Reset whole CR register but HSI in 2 steps in case HSEBYP is set */ + LL_RCC_WriteReg(CR, RCC_CR_HSION); + while (LL_RCC_HSE_IsReady() != 0U) + {} + LL_RCC_WriteReg(CR, RCC_CR_HSION); + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIER, 0x00000000U); + + /* Clear all interrupts flags */ + LL_RCC_WriteReg(CICR, 0xFFFFFFFFU); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * and different peripheral clocks available on the device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE divided by HSI division factor(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note (**) HSI_VALUE is a constant defined in this file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in this file (default value + * 48 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * @note The result of this function could be incorrect when using fractional + * value for HSE crystal. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * @{ + */ + +/** + * @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks + * @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function + * must be called to update structure fields. Otherwise, any + * configuration based on this function will be incorrect. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); + + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency); + + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency); +} + +/** + * @brief Return USARTx clock frequency + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @retval USART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready + */ +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) +{ + uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource)); + + if (USARTxSource == LL_RCC_USART1_CLKSOURCE) + { + /* USART1CLK clock frequency */ + switch (LL_RCC_GetUSARTClockSource(USARTxSource)) + { + case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ + usart_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_USART1_CLKSOURCE_HSIKER: /* USART1 Clock is HSI Kernel */ + if (LL_RCC_HSI_IsReady() == 1U) + { + usart_frequency = (HSI_VALUE / ((LL_RCC_HSIKER_GetDivider() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + break; + + case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + usart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */ + default: + usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + else + { + } + return usart_frequency; +} + +/** + * @brief Return I2Cx clock frequency + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @retval I2C clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready + */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) +{ + uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource)); + + if (I2CxSource == LL_RCC_I2C1_CLKSOURCE) + { + /* I2C1 CLK clock frequency */ + switch (LL_RCC_GetI2CClockSource(I2CxSource)) + { + case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ + i2c_frequency = RCC_GetSystemClockFreq(); + break; + + case LL_RCC_I2C1_CLKSOURCE_HSIKER: /* I2C1 Clock is HSI Kernel */ + if (LL_RCC_HSI_IsReady() == 1U) + { + i2c_frequency = (HSI_VALUE / ((LL_RCC_HSIKER_GetDivider() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + } + break; + + case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */ + default: + i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq())); + break; + } + } + else + { + } + + return i2c_frequency; +} + +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S1_CLKSOURCE + * @retval I2S clock frequency (in Hz) + * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator is not ready + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + if (I2SxSource == LL_RCC_I2S1_CLKSOURCE) + { + /* I2S1 CLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S1_CLKSOURCE_HSIKER: /* I2S1 Clock is HSI Kernel */ + i2s_frequency = (HSI_VALUE / ((LL_RCC_HSIKER_GetDivider() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + break; + + case LL_RCC_I2S1_CLKSOURCE_PIN: /* I2S1 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S1_CLKSOURCE_SYSCLK: /* I2S1 Clock is System Clock */ + default: + i2s_frequency = RCC_GetSystemClockFreq(); + break; + } + } + + return i2s_frequency; +} + +/** + * @brief Return ADCx clock frequency + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval ADC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) is not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) +{ + uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource)); + + /* ADCCLK clock frequency */ + switch (LL_RCC_GetADCClockSource(ADCxSource)) + { + case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ + adc_frequency = RCC_GetSystemClockFreq(); + break; + case LL_RCC_ADC_CLKSOURCE_HSIKER : /* HSI clock Kernel used as ADC clock source */ + adc_frequency = (HSI_VALUE / ((LL_RCC_HSIKER_GetDivider() >> RCC_CR_HSIKERDIV_Pos) + 1U)); + break; + default: + adc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return adc_frequency; +} + +/** + * @brief Return RTC clock frequency + * @retval RTC clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (LSI, LSE or HSE) are not ready + * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected + */ +uint32_t LL_RCC_GetRTCClockFreq(void) +{ + uint32_t rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* RTCCLK clock frequency */ + switch (LL_RCC_GetRTCClockSource()) + { + case LL_RCC_RTC_CLKSOURCE_LSE: /* LSE clock used as RTC clock source */ + if (LL_RCC_LSE_IsReady() == 1U) + { + rtc_frequency = LSE_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_LSI: /* LSI clock used as RTC clock source */ + if (LL_RCC_LSI_IsReady() == 1U) + { + rtc_frequency = LSI_VALUE; + } + break; + + case LL_RCC_RTC_CLKSOURCE_HSE_DIV32: /* HSE clock used as ADC clock source */ + rtc_frequency = HSE_VALUE / 32U; + break; + + case LL_RCC_RTC_CLKSOURCE_NONE: /* No clock used as RTC clock source */ + default: + rtc_frequency = LL_RCC_PERIPH_FREQUENCY_NA; + break; + } + + return rtc_frequency; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (LL_RCC_GetSysClkSource()) + { + case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */ + frequency = HSE_VALUE; + break; + case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ + default: + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV)) >> RCC_CR_HSIDIV_Pos)); + frequency = (HSI_VALUE / hsidiv); + break; + } + + return frequency; +} + +/** + * @brief Return HCLK clock frequency + * @param SYSCLK_Frequency SYSCLK clock frequency + * @retval HCLK clock frequency (in Hz) + */ +uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency) +{ + /* HCLK clock frequency */ + return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); +} + +/** + * @brief Return PCLK1 clock frequency + * @param HCLK_Frequency HCLK clock frequency + * @retval PCLK1 clock frequency (in Hz) + */ +uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +{ + /* PCLK1 clock frequency */ + return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rtc.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rtc.c new file mode 100644 index 0000000000..571ad0283e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_rtc.c @@ -0,0 +1,706 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_rtc.c + * @author MCD Application Team + * @brief RTC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_rtc.h" +#include "stm32c0xx_ll_cortex.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @addtogroup RTC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Constants + * @{ + */ +/* Default values used for prescaler */ +#define RTC_ASYNCH_PRESC_DEFAULT 0x0000007FU +#define RTC_SYNCH_PRESC_DEFAULT 0x000000FFU + +/* Values used for timeout */ +#define RTC_INITMODE_TIMEOUT 1000U /* 1s when tick set to 1ms */ +#define RTC_SYNCHRO_TIMEOUT 1000U /* 1s when tick set to 1ms */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \ + || ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM)) + +#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FU) + +#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FFFU) + +#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ + || ((__VALUE__) == LL_RTC_FORMAT_BCD)) + +#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \ + || ((__VALUE__) == LL_RTC_TIME_FORMAT_PM)) + +#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U)) +#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) +#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) +#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) + +#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY)) + +#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U)) + +#define IS_LL_RTC_MONTH(__VALUE__) (((__VALUE__) == LL_RTC_MONTH_JANUARY) \ + || ((__VALUE__) == LL_RTC_MONTH_FEBRUARY) \ + || ((__VALUE__) == LL_RTC_MONTH_MARCH) \ + || ((__VALUE__) == LL_RTC_MONTH_APRIL) \ + || ((__VALUE__) == LL_RTC_MONTH_MAY) \ + || ((__VALUE__) == LL_RTC_MONTH_JUNE) \ + || ((__VALUE__) == LL_RTC_MONTH_JULY) \ + || ((__VALUE__) == LL_RTC_MONTH_AUGUST) \ + || ((__VALUE__) == LL_RTC_MONTH_SEPTEMBER) \ + || ((__VALUE__) == LL_RTC_MONTH_OCTOBER) \ + || ((__VALUE__) == LL_RTC_MONTH_NOVEMBER) \ + || ((__VALUE__) == LL_RTC_MONTH_DECEMBER)) + +#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U) + +#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_ALL)) + +#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY)) + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes the RTC registers to their default reset values. + * @note This function does not reset the RTC Clock source and RTC Backup Data + * registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are de-initialized + * - ERROR: RTC registers are not de-initialized + */ +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) +{ + ErrorStatus status = ERROR; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Reset TR, DR and CR registers */ + WRITE_REG(RTCx->TR, 0x00000000U); + WRITE_REG(RTCx->DR, (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + WRITE_REG(RTCx->PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT)); + WRITE_REG(RTCx->ALRMAR, 0x00000000U); + WRITE_REG(RTCx->SHIFTR, 0x00000000U); + WRITE_REG(RTCx->CALR, 0x00000000U); + WRITE_REG(RTCx->ALRMASSR, 0x00000000U); + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + /* Wait till the RTC RSF flag is set */ + status = LL_RTC_WaitForSynchro(RTCx); + } + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTCx RTC Instance + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat)); + assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); + assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Set Hour Format */ + LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat); + + /* Configure Synchronous and Asynchronous prescaler factor */ + LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler); + LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_InitTypeDef field to default value. + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) +{ + /* Set RTC_InitStruct fields to default values */ + RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR; + RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; + RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT; +} + +/** + * @brief Set the RTC current time. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + } + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours, + RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds); + } + else + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTC); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). + * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24; + RTC_TimeStruct->Hours = 0U; + RTC_TimeStruct->Minutes = 0U; + RTC_TimeStruct->Seconds = 0U; +} + +/** + * @brief Set the RTC current date. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_DateStruct pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Day register is configured + * - ERROR: RTC Day register is not configured + */ +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U)) + { + RTC_DateStruct->Month = (RTC_DateStruct->Month & (uint8_t)~(0x10U)) + 0x0AU; + } + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year)); + assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month)); + assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day)); + } + else + { + assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year))); + assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month))); + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day))); + } + assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, RTC_DateStruct->Year); + } + else + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day), + __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTC); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00) + * @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY; + RTC_DateStruct->Day = 1U; + RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY; + RTC_DateStruct->Year = 0U; +} + +/** + * @brief Set the RTC Alarm A. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use @ref LL_RTC_ALMA_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMA registers are configured + * - ERROR: ALARMA registers are not configured + */ +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMA_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMA_EnableWeekday(RTCx); + LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE; +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Check if the Initialization mode is set */ + if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U) + { + /* Set the Initialization mode */ + LL_RTC_EnableInitMode(RTCx); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) +{ + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + return SUCCESS; +} + +/** + * @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Clear RSF flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Wait the registers to be synchronised */ + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 0U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + + if (status != ERROR) + { + timeout = RTC_SYNCHRO_TIMEOUT; + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_spi.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_spi.c new file mode 100644 index 0000000000..b3b6e1cb69 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_spi.c @@ -0,0 +1,522 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_spi.c + * @author MCD Application Team + * @brief SPI LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_spi.h" +#include "stm32c0xx_ll_bus.h" +#include "stm32c0xx_ll_rcc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (SPI1) + +/** @addtogroup SPI_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Constants SPI Private Constants + * @{ + */ +/* SPI registers Masks */ +#define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \ + SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \ + SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_CRCL | \ + SPI_CR1_CRCNEXT | SPI_CR1_CRCEN | SPI_CR1_BIDIOE | \ + SPI_CR1_BIDIMODE) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Macros SPI Private Macros + * @{ + */ +#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ + || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) + +#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ + || ((__VALUE__) == LL_SPI_MODE_SLAVE)) + +#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) + +#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ + || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) + +#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ + || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) + +#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) + +#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) + +#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ + || ((__VALUE__) == LL_SPI_MSB_FIRST)) + +#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ + || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) + +#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + +#if defined(SPI1) + if (SPIx == SPI1) + { + /* Force reset of SPI clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1); + + /* Release reset of SPI clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1); + + status = SUCCESS; + } +#endif /* SPI1 */ + + return status; +} + +/** + * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the SPI Instance SPIx*/ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + + /* Check the SPI parameters from SPI_InitStruct*/ + assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); + assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); + assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); + assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); + assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); + assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); + assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate)); + assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); + assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); + + if (LL_SPI_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx CR1 Configuration ------------------------ + * Configure SPIx CR1 with parameters: + * - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits + * - Master/Slave Mode: SPI_CR1_MSTR bit + * - ClockPolarity: SPI_CR1_CPOL bit + * - ClockPhase: SPI_CR1_CPHA bit + * - NSS management: SPI_CR1_SSM bit + * - BaudRate prescaler: SPI_CR1_BR[2:0] bits + * - BitOrder: SPI_CR1_LSBFIRST bit + * - CRCCalculation: SPI_CR1_CRCEN bit + */ + MODIFY_REG(SPIx->CR1, + SPI_CR1_CLEAR_MASK, + SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | + SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase | + SPI_InitStruct->NSS | SPI_InitStruct->BaudRate | + SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation); + + /*---------------------------- SPIx CR2 Configuration ------------------------ + * Configure SPIx CR2 with parameters: + * - DataWidth: DS[3:0] bits + * - NSS management: SSOE bit + */ + MODIFY_REG(SPIx->CR2, + SPI_CR2_DS | SPI_CR2_SSOE, + SPI_InitStruct->DataWidth | (SPI_InitStruct->NSS >> 16U)); + + /* Set Rx FIFO to Quarter (1 Byte) in case of 8 Bits mode. No DataPacking by default */ + if (SPI_InitStruct->DataWidth < LL_SPI_DATAWIDTH_9BIT) + { + LL_SPI_SetRxFIFOThreshold(SPIx, LL_SPI_RX_FIFO_TH_QUARTER); + } + + /*---------------------------- SPIx CRCPR Configuration ---------------------- + * Configure SPIx CRCPR with parameters: + * - CRCPoly: CRCPOLY[15:0] bits + */ + if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); + LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); + } + status = SUCCESS; + } + +#if defined (SPI_I2S_SUPPORT) + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2S_SUPPORT */ + return status; +} + +/** + * @brief Set each @ref LL_SPI_InitTypeDef field to default value. + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) +{ + /* Set SPI_InitStruct fields to default values */ + SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; + SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; + SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; + SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; + SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; + SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; + SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; + SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; + SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; + SPI_InitStruct->CRCPoly = 7U; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup I2S_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Constants I2S Private Constants + * @{ + */ +/* I2S registers Masks */ +#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) + +#define I2S_I2SPR_CLEAR_MASK 0x0002U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Macros I2S Private Macros + * @{ + */ + +#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) + +#define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ + || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) + +#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ + || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) + +#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ + || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) + +#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ + || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) + +#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ + && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ + || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) + +#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) + +#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ + || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI/I2S registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) +{ + return LL_SPI_DeInit(SPIx); +} + +/** + * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are Initialized + * - ERROR: SPI registers are not Initialized + */ +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) +{ + uint32_t i2sdiv = 2U; + uint32_t i2sodd = 0U; + uint32_t packetlength = 1U; + uint32_t tmp; + LL_RCC_ClocksTypeDef rcc_clocks; + uint32_t sourceclock; + ErrorStatus status = ERROR; + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); + assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); + assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); + assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); + assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); + assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); + + if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx I2SCFGR Configuration -------------------- + * Configure SPIx I2SCFGR with parameters: + * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit + * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits + * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits + * - ClockPolarity: SPI_I2SCFGR_CKPOL bit + */ + + /* Write to SPIx I2SCFGR */ + MODIFY_REG(SPIx->I2SCFGR, + I2S_I2SCFGR_CLEAR_MASK, + I2S_InitStruct->Mode | I2S_InitStruct->Standard | + I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | + SPI_I2SCFGR_I2SMOD); + + /*---------------------------- SPIx I2SPR Configuration ---------------------- + * Configure SPIx I2SPR with parameters: + * - MCLKOutput: SPI_I2SPR_MCKOE bit + * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits + */ + + /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) + * else, default values are used: i2sodd = 0U, i2sdiv = 2U. + */ + if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) + * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). + */ + if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) + { + /* Packet length is 32 bits */ + packetlength = 2U; + } + + /* I2S Clock source is System clock: Get System Clock frequency */ + LL_RCC_GetSystemClocksFreq(&rcc_clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = rcc_clocks.SYSCLK_Frequency; + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + else + { + /* MCLK output is disabled */ + tmp = (((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + + /* Remove the floating point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (tmp & (uint16_t)0x0001U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = ((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (i2sodd << 8U); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Write to SPIx I2SPR register the computed value */ + WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); + + status = SUCCESS; + } + return status; +} + +/** + * @brief Set each @ref LL_I2S_InitTypeDef field to default value. + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) +{ + /*--------------- Reset I2S init structure parameters values -----------------*/ + I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; + I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; + I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; + I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; + I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; + I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; +} + +/** + * @brief Set linear and parity prescaler. + * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n + * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). + * @param SPIx SPI Instance + * @param PrescalerLinear value Min_Data=0x02 and Max_Data=0xFF. + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) +{ + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); + assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); + + /* Write to SPIx I2SPR */ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* defined (SPI1) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_tim.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_tim.c new file mode 100644 index 0000000000..9ab836064c --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_tim.c @@ -0,0 +1,1335 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_tim.c + * @author MCD Application Team + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_tim.h" +#include "stm32c0xx_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM3) || defined (TIM14) || defined (TIM16) || defined (TIM17) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASSYMETRIC_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ + || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) + +#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) + +#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) + +#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) + +#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_BREAK2_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK2_ENABLE)) + +#define IS_LL_TIM_BREAK2_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK2_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK2_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_BREAK2_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_BREAK2_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK2_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ + || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM1) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1); + } +#if defined(TIM3) + else if (TIMx == TIM3) + { + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); + } +#endif /* TIM3 */ + + else if (TIMx == TIM14) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM14); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM14); + } + + else if (TIMx == TIM16) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16); + } +#if defined(TIM17) + else if (TIMx == TIM17) + { + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17); + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17); + } +#endif /* TIM17 */ + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = 0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + TIM_InitStruct->RepetitionCounter = 0x00000000U; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure + * (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); + } + + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure + * (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = 0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; + TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH5: + result = OC5Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH6: + result = OC6Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration + * data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data + * structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface + * configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface + * configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx Hall sensor interface configuration data + * structure to their default values. + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface + * configuration data structure) + * @retval None + */ +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + /* Set the default configuration */ + TIM_HallSensorInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_HallSensorInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_HallSensorInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_HallSensorInitStruct->CommutationDelay = 0U; +} + +/** + * @brief Configure the Hall sensor interface of the timer instance. + * @note TIMx CH1, CH2 and CH3 inputs connected through a XOR + * to the TI1 input channel + * @note TIMx slave mode controller is configured in reset mode. + Selected internal trigger is TI1F_ED. + * @note Channel 1 is configured as input, IC1 is mapped on TRC. + * @note Captured value stored in TIMx_CCR1 correspond to the time elapsed + * between 2 changes on the inputs. It gives information about motor speed. + * @note Channel 2 is configured in output PWM 2 mode. + * @note Compare value stored in TIMx_CCR2 corresponds to the commutation delay. + * @note OC2REF is selected as trigger output on TRGO. + * @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used + * when TIMx operates in Hall sensor interface mode. + * @param TIMx Timer Instance + * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor + * interface configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct) +{ + uint32_t tmpcr2; + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_HallSensorInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ICPSC(TIM_HallSensorInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_HallSensorInitStruct->IC1Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx SMCR register value */ + tmpsmcr = LL_TIM_ReadReg(TIMx, SMCR); + + /* Connect TIMx_CH1, CH2 and CH3 pins to the TI1 input */ + tmpcr2 |= TIM_CR2_TI1S; + + /* OC2REF signal is used as trigger output (TRGO) */ + tmpcr2 |= LL_TIM_TRGO_OC2REF; + + /* Configure the slave mode controller */ + tmpsmcr &= (uint32_t)~(TIM_SMCR_TS | TIM_SMCR_SMS); + tmpsmcr |= LL_TIM_TS_TI1F_ED; + tmpsmcr |= LL_TIM_SLAVEMODE_RESET; + + /* Configure input channel 1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(LL_TIM_ACTIVEINPUT_TRC >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_HallSensorInitStruct->IC1Prescaler >> 16U); + + /* Configure input channel 2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_OC2M | TIM_CCMR1_OC2FE | TIM_CCMR1_OC2PE | TIM_CCMR1_OC2CE); + tmpccmr1 |= (uint32_t)(LL_TIM_OCMODE_PWM2 << 8U); + + /* Set Channel 1 polarity and enable Channel 1 and Channel2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_HallSensorInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx SMCR */ + LL_TIM_WriteReg(TIMx, SMCR, tmpsmcr); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + /* Write to TIMx CCR2 */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_HallSensorInitStruct->CommutationDelay); + + return SUCCESS; +} + +/** + * @brief Set the fields of the Break and Dead Time configuration data structure + * to their default values. + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval None + */ +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; + TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; + TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; + TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00; + TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; + TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; + TIM_BDTRInitStruct->BreakFilter = LL_TIM_BREAK_FILTER_FDIV1; + TIM_BDTRInitStruct->BreakAFMode = LL_TIM_BREAK_AFMODE_INPUT; + TIM_BDTRInitStruct->Break2State = LL_TIM_BREAK2_DISABLE; + TIM_BDTRInitStruct->Break2Polarity = LL_TIM_BREAK2_POLARITY_LOW; + TIM_BDTRInitStruct->Break2Filter = LL_TIM_BREAK2_FILTER_FDIV1; + TIM_BDTRInitStruct->Break2AFMode = LL_TIM_BREAK2_AFMODE_INPUT; + TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; +} + +/** + * @brief Configure the Break and Dead Time feature of the timer instance. + * @note As the bits BK2P, BK2E, BK2F[3:0], BKF[3:0], AOE, BKP, BKE, OSSI, OSSR + * and DTG[7:0] can be write-locked depending on the LOCK configuration, it + * can be necessary to configure all of them during the first write access to + * the TIMx_BDTR register. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a second break input. + * @param TIMx Timer Instance + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Break and Dead Time is initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + uint32_t tmpbdtr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); + assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); + assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); + assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); + assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); + assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, TIM_BDTRInitStruct->AutomaticOutput); + if (IS_TIM_ADVANCED_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_BREAK_FILTER(TIM_BDTRInitStruct->BreakFilter)); + assert_param(IS_LL_TIM_BREAK_AFMODE(TIM_BDTRInitStruct->BreakAFMode)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, TIM_BDTRInitStruct->BreakFilter); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, TIM_BDTRInitStruct->BreakAFMode); + } + + if (IS_TIM_BKIN2_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_BREAK2_STATE(TIM_BDTRInitStruct->Break2State)); + assert_param(IS_LL_TIM_BREAK2_POLARITY(TIM_BDTRInitStruct->Break2Polarity)); + assert_param(IS_LL_TIM_BREAK2_FILTER(TIM_BDTRInitStruct->Break2Filter)); + assert_param(IS_LL_TIM_BREAK2_AFMODE(TIM_BDTRInitStruct->Break2AFMode)); + + /* Set the BREAK2 input related BDTR bit-fields */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (TIM_BDTRInitStruct->Break2Filter)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, TIM_BDTRInitStruct->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, TIM_BDTRInitStruct->Break2Polarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, TIM_BDTRInitStruct->Break2AFMode); + } + + /* Set TIMx_BDTR */ + LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); + + return SUCCESS; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NP, TIM_OCInitStruct->OCNPolarity << 6U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2NE, TIM_OCInitStruct->OCNState << 6U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2, TIM_OCInitStruct->OCIdleState << 2U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS2N, TIM_OCInitStruct->OCNIdleState << 3U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NP, TIM_OCInitStruct->OCNPolarity << 10U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3NE, TIM_OCInitStruct->OCNState << 10U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3, TIM_OCInitStruct->OCIdleState << 4U); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS3N, TIM_OCInitStruct->OCNIdleState << 5U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS4, TIM_OCInitStruct->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 5. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 5 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC5Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC5E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC5E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC5M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC5P, TIM_OCInitStruct->OCPolarity << 16U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC5E, TIM_OCInitStruct->OCState << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS5, TIM_OCInitStruct->OCIdleState << 8U); + + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH5(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 6. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 6 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC6Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr3; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + + /* Disable the Channel 5: Reset the CC6E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC6E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CCMR3 register value */ + tmpccmr3 = LL_TIM_ReadReg(TIMx, CCMR3); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr3, TIM_CCMR3_OC6M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC6P, TIM_OCInitStruct->OCPolarity << 20U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC6E, TIM_OCInitStruct->OCState << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the Output Idle state */ + MODIFY_REG(TIMx->CR2, TIM_CR2_OIS6, TIM_OCInitStruct->OCIdleState << 10U); + } + + /* Write to TIMx CCMR3 */ + LL_TIM_WriteReg(TIMx, CCMR3, tmpccmr3); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH6(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC4P | TIM_CCER_CC4NP), + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_usart.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_usart.c new file mode 100644 index 0000000000..c8af242c86 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_usart.c @@ -0,0 +1,380 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_usart.c + * @author MCD Application Team + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_usart.h" +#include "stm32c0xx_ll_rcc.h" +#include "stm32c0xx_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +#if defined (USART1) || defined (USART2) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +#define IS_LL_USART_PRESCALER(__VALUE__) (((__VALUE__) == LL_USART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV256)) + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 8000000U) + +/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ +#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1); + } + else if (USARTx == USART2) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; + LL_RCC_ClocksTypeDef RCC_Clocks; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_PRESCALER(USART_InitStruct->PrescalerValue)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration --------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); + + /*---------------------------- USART CR2 Configuration --------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration --------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to + * USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration --------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + if (USARTx == USART1) + { + periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE); + } + else if (USARTx == USART2) + { + /* USART2 clock is PCLK */ + LL_RCC_GetSystemClocksFreq(&RCC_Clocks); + periphclk = RCC_Clocks.PCLK1_Frequency; + } + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->PrescalerValue, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); + } + + /*---------------------------- USART PRESC Configuration ----------------------- + * Configure USARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: USART_PRESC_PRESCALER bits according to USART_InitStruct->PrescalerValue value. + */ + LL_USART_SetPrescaler(USARTx, USART_InitStruct->PrescalerValue); + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->PrescalerValue = LL_USART_PRESCALER_DIV1; + USART_InitStruct->BaudRate = 9600U; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according + * to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_utils.c b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_utils.c new file mode 100644 index 0000000000..e7afe82c10 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_ll_utils.c @@ -0,0 +1,275 @@ +/** + ****************************************************************************** + * @file stm32c0xx_ll_utils.c + * @author MCD Application Team + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "stm32c0xx_ll_utils.h" +#include "stm32c0xx_ll_rcc.h" +#include "stm32c0xx_ll_system.h" +#include "stm32c0xx_ll_pwr.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32C0xx_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ +#define UTILS_MAX_FREQUENCY 48000000U /*!< Maximum frequency for system clock, in Hz */ + +/* Defines used for HSE range */ +#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */ +#define UTILS_HSE_FREQUENCY_MAX 48000000U /*!< Frequency max for HSE frequency, in Hz */ + +/* Defines used for FLASH latency according to HCLK Frequency */ +#define UTILS_SCALE1_LATENCY1_FREQ 24000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */ +#define UTILS_SCALE1_LATENCY2_FREQ 48000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ + || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) + +#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ + || ((__VALUE__) == LL_RCC_APB1_DIV_16)) + +#define IS_LL_UTILS_HSI_DIV(__VALUE__) (((__VALUE__) == LL_RCC_HSI_DIV_1) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_2) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_4) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_8) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_16) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_32) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_64) \ + || ((__VALUE__) == LL_RCC_HSI_DIV_128)) + +#define IS_LL_UTILS_HSIKER_DIV(__VALUE__) (((__VALUE__) == LL_RCC_HSIKER_DIV_1) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_2) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_3) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_4) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_5) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_6) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_7) \ + || ((__VALUE__) == LL_RCC_HSIKER_DIV_8)) + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ + || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN)\ + && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX)) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param HCLKFrequency HCLK frequency in Hz + * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq + * @retval None + */ +void LL_Init1msTick(uint32_t HCLKFrequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(HCLKFrequency, 1000U); +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + uint32_t tmpDelay; /* MISRAC2012-Rule-17.8 */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + tmpDelay = Delay; + /* Add a period to guaranty minimum wait */ + if (tmpDelay < LL_MAX_DELAY) + { + tmpDelay ++; + } + + while (tmpDelay != 0U) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + tmpDelay --; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_EF_SYSTEM + * @brief System Configuration functions + * + @verbatim + =============================================================================== + ##### System Configuration functions ##### + =============================================================================== + [..] + System, AHB and APB buses clocks configuration + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 is 48000000 Hz. + @endverbatim + @internal + Depending on the device voltage range, the maximum frequency should be + adapted accordingly: + + (++) Table 1. HCLK clock frequency. + (++) +------------------------------------+ + (++) | Latency | HCLK clock | + (++) | | frequency (MHz) | + (++) | | | + (++) | |------------------- + (++) | | voltage range 1 | + (++) | | 1.08V - 1.32V | + (++) |-----------------|------------------| + (++) |0WS(1 CPU cycles)| HCLK <= 24 | + (++) |-----------------|------------------| + (++) |1WS(2 CPU cycles)| HCLK <= 48 | + (++) +------------------------------------+ + + @endinternal + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency) +{ + /* HCLK clock frequency */ + SystemCoreClock = HCLKFrequency; +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UTILS_LL_Private_Functions + * @{ + */ +/** + * @brief Update number of Flash wait states in line with new frequency and current + voltage range. + * @param HCLK_Frequency HCLK frequency + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Latency has been modified + * - ERROR: Latency cannot be modified + */ +ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK_Frequency) +{ + ErrorStatus status = SUCCESS; + + uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ + + /* Frequency cannot be equal to 0 */ + if (HCLK_Frequency == 0U) + { + status = ERROR; + } + else + { + if (HCLK_Frequency > UTILS_SCALE1_LATENCY1_FREQ) + { + /* 24 < HCLK <= 48 => 1WS (2 CPU cycles) */ + latency = LL_FLASH_LATENCY_1; + } + else + { + /* else HCLK_Frequency < 24MHz default LL_FLASH_LATENCY_0 0WS */ + } + + LL_FLASH_SetLatency(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (LL_FLASH_GetLatency() != latency) + { + status = ERROR; + } + } + return status; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Add button.svg b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Add button.svg new file mode 100644 index 0000000000..c211545dad --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Add button.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Update.svg b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Update.svg new file mode 100644 index 0000000000..f88381f1e6 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/Update.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/favicon.png b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/favicon.png new file mode 100644 index 0000000000000000000000000000000000000000..06713eec4974e141c6e9b4156d34e61e89f282ca GIT binary patch literal 4126 zcmV+(5aI8MP)ZIGU@QfPy~$kHP}Vz9c$a)g>fT6hB^OaK4>c|MGS0000HbW%=J|NsC0|NsC0 z|NsC0|NsC0041%NVgLXD!bwCyRCwCllie1CAP9sJ&9ooo{hxLjw5@YC+xxf~%TE}{ zNd5%935b--eKa7{Q8)vZ;eI6pGFH>rL)887WOA={e(b_&0g-g6to#Hm2B3vqWV>1u z@z7*I(bdWdx-Y=OT@|og)oZEgAbc7ep|Gf{$7j1Oa#T&r4>0xv(+}tR_4biWa z1Q-BfcsgeLIJPbT0000rV&neh&#Q1i z007~1e$oCcFS8neI|hJl{-P!B1ZZ9hpmq0)X0i`JwE&>$+E?>%_LC6RbVIkUx0b+_+BaR3cnT7Zv!AJxW zizFb)h!jyGOOZ85F;a?DAXP{m@;!0_IfqH8(HlgRxt7s3}k3K`kFu>>-2Q$QMFfPW!La{h336o>X zu_CMttHv6zR;&ZNiS=X8v3CR#fknUxHUxJ0uoBa_M6WNWeqIg~6QE69c9o#eyhGvpiOA@W-aonk<7r1(?fC{oI5N*U!4 zfg=2N-7=cNnjjOr{yriy6mMFgG#l znCF=fnQv8CDz++o6_Lscl}eQ+l^ZHARH>?_s@|##Rr6KLRFA1%Q+=*RRWnoLsR`7U zt5vFIcfW3@?wFpwUVxrVZ>QdQz32KIeJ}k~{cZZE^+ya? z2D1z#2HOnI7(B%_ac?{wFUQ;QQA1tBKtrWrm0_3Rgps+?Jfqb{jYbcQX~taRB;#$y zZN{S}1|}gUOHJxc?wV3fxuz+mJ4`!F$IZ;mqRrNsHJd##*D~ju=bP7?-?v~|cv>vB zsJ6IeNwVZxrdjT`yl#bBIa#GxRa#xMMy;K#CDyyGyQdMSxlWT#tDe?p!?5wT$+oGt z8L;Kp2HUQ-ZMJ=3XJQv;x5ci*?vuTfeY$;({XGW_huIFR9a(?@3)XSs8O^N5RyOM=TTmp(3=8^+zpz2r)C z^>JO{deZfso3oq3?Wo(Y?l$ge?uXo;%ru`Vo>?<<(8I_>;8Eq#KMS9gFl*neeosSB zfoHYnBQIkwkyowPu(zdms`p{<7e4kra-ZWq<2*OsGTvEV%s0Td$hXT+!*8Bnh2KMe zBmZRodjHV?r+_5^X9J0WL4jKW`}lf%A-|44I@@LTvf1rHjG(ze6+w@Jt%Bvjts!X0 z?2xS?_ve_-kiKB_KiJlZ$9G`c^=E@oNG)mWWaNo-3TIW8)$Hg0Ub-~8?KhvJ>$ z3*&nim@mj(aCxE5!t{lw7O5^0EIO7zOo&c6l<+|iDySBWCGrz@C5{St!X3hAA}`T4 z(TLbXTq+(;@<=L8dXnssyft|w#WSTW<++3>sgS%(4NTpeI-VAqb|7ssJvzNHgOZVu zaYCvgO_R1~>SyL=cFU|~g|hy|Zi}}s9+d~lYqOB71z9Z$wnC=pR9Yz4DhIM>Wmjgu z&56o6maCpC&F##y%G;1PobR9i?GnNg;gYtchD%p19a!eQtZF&3JaKv33gZ<8D~47E ztUS1iwkmDaPpj=$m#%)jCVEY4fnLGNg2A-`YwHVD3gv};>)hAvT~AmqS>Lr``i7kw zJ{5_It`yrBmlc25DBO7E8;5VoznR>Ww5hAaxn$2~(q`%A-YuS64wkBy=9dm`4cXeX z4c}I@?e+FW+b@^RDBHV(wnMq2zdX3SWv9u`%{xC-q*U}&`cyXV(%rRT*Z6MH?i+i& z_B8C(+grT%{XWUQ+f@NoP1R=AW&26{v-dx)iK^-Nmiuj8txj!m?Z*Ss1N{dh4z}01 z)YTo*JycSU)+_5r4#yw9{+;i4Ee$peRgIj+;v;ZGdF1K$3E%e~4LaI(jC-u%2h$&R z9cLXcYC@Xwnns&bn)_Q~Te?roKGD|d-g^8;+aC{{G(1^(O7m37Y1-+6)01cN&y1aw zoqc{T`P^XJqPBbIW6s}d4{z_f5Om?vMgNQEJG?v2T=KYd^0M3I6IZxbny)%vZR&LD zJpPl@Psh8QyPB@KTx+@RdcC!KX7}kEo;S|j^u2lU7XQ}Oo;f|;z4Ll+_r>@1-xl3| zawq-H%e&ckC+@AhPrP6BKT#_XdT7&;F71j}Joy zkC~6lh7E@6o;W@^IpRNZ{ptLtL(gQ-CY~4mqW;US7Zxvm_|@yz&e53Bp_lTPlfP|z zrTyx_>lv@x#=^!PzR7qqF<$gm`|ZJZ+;<)Cqu&ot2z=0000WV@Og>004R=004l4008;_004mL004C`008P>0026e000+nl3&F} z000F^NklQWRUVq~pvFslpiNq83Yr*1(ELa!!kppKfxQKEkPzz^I>0W)!71xam z(B64`)5a~kHf9SBOp*Wvo{xA*e4|Kv3g6TCo+fF8q^C$|g>#NlXyY$%lmkmCh$x1Z zFbJ_hiDG`37w>KPVB83d7E3>R@-M9$`|}|QFF}1qSk!nanPdVd3K38edo3y+D*=Uo zfOWCwj(F@GSjPG&B<0O;H!Zm0g>eDeK09{b@xB};mEy; z;Gp5H_Cr65qKM1uYIu6x&16!Ei=BHfJLe)1IUnFqc6d#D=ZVQmV9C73vy1=x$SK;s z=*CYZP+Ei1D5Vjl#u88v5dv#jId?iu)8mM}{mD`GcMXtAC5ap?ZoKr&iYuqTKHe$t zTR%R$ZZwxec?l+0r_LIVbe-mzH+D0*ZYsu4BE~~JA2A+AD?BAArO=g8ZfvXtU~o9c zZ(Bd-RFK5jh*DvM1v6^41HB@0K0qn7E8E&Xz1mk6hvmx?*|WB_H!dcO;5R$=<4b~s z5zr3N4zxlkMKOrDeny(PGpEM6^hGyc7lhg>MWtM!af*pn%&q_PxI(n^(-Zd{ICPAp z(WE@Zz5|EZyt{MEDy&l5$Cba^zU!9k&;Vs7lk$@o02LOwb#e2{#3%Cn2>kQF(RKUU z+tW!;FT0@d+TX^L;>@3RytlTP&ts$pqA}TwENBlg9?$-D zF9Sn4URZx8)hVBw<~NY=h3=so7{jEhG%Zc_0QBSvY~K4BS|W5MAem5XSb6m}VDN$f zy+b3n9qjIJoHM5pqYa`IPH9AIoM=!AE1Er>r|3E}#Jq-S)cTrfD&TZjAuN@+V}3mi zlhOce+q<8>Y?i93G=*Z3Web`ri!Q%p%LR*(bB?;|)B`&=J&ab0Z(UKpbzyZV5o*#& z0FLzzaI$v*-#WB)+`n>BoJ*1AwU0XSu;@w&Hu1WYXVR#!8itC%68CzMeiXhL#`9W$9J30NB-Wg!ex`hBlg9F5u@&o4>hd`TWPv z{r{JbyvQGZzbyvPS}zAifbhF49z~X|@9v|!=No>qsF|P~vf=g>7#%0yk<U?Ha8*Z4HW>#8w>z$A3 z>^uQlk;$a-6CQ(uc@RM)Cbss!xuPVl2@c1u-5tEUw}U8OfP_J+QYhfu$B<0Cj3xm7 c?*aZZ00ulYFs-m=@&Et;07*qoM6N<$f~=14i~s-t literal 0 HcmV?d00001 diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st.css b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st.css new file mode 100644 index 0000000000..3caf11c32e --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st.css @@ -0,0 +1,1700 @@ +@charset "UTF-8"; +/* + Flavor name: Default (mini-default) + Author: Angelos Chalaris (chalarangelo@gmail.com) + Maintainers: Angelos Chalaris + mini.css version: v3.0.0-alpha.3 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #111; + --secondary-fore-color: #444; + --back-color: #f8f8f8; + --secondary-back-color: #f0f0f0; + --blockquote-color: #f57c00; + --pre-color: #1565c0; + --border-color: #aaa; + --secondary-border-color: #ddd; + --heading-ratio: 1.19; + --universal-margin: 0.5rem; + --universal-padding: 0.125rem; + --universal-border-radius: 0.125rem; + --a-link-color: #0277bd; + --a-visited-color: #01579b; } + +html { + font-size: 14px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Ubuntu, "Helvetica Neue", Helvetica, sans-serif; + line-height: 1.4; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + background: var(--back-color); } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.2; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 500; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio); ); + background: var(--mark-back-color); + font-weight: 600; + padding: 0.1em 0.5em 0.2em 0.5em; + color: var(--mark-fore-color); } + +h3 { + font-size: calc(1rem * var(--heading-ratio)); + padding-left: calc(2 * var(--universal-margin)); + /* background: var(--border-color); */ + } + +h4 { + font-size: 1rem;); + padding-left: calc(4 * var(--universal-margin)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(6 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0625rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0625rem solid var(--secondary-border-color); + border-left: 0.375rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 3rem; + font-weight: 700; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0625rem solid var(--secondary-border-color); + border-left: 0.25rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #f8f8f8; + --card-fore-color: #111; + --card-border-color: #ddd; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0625rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0625rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { +/* --card-back-color: #ffca28; */ + --card-back-color: #e5b8b7; + --card-border-color: #e8b825; } + +.card.error { + --card-back-color: #b71c1c; + --card-fore-color: #f8f8f8; + --card-border-color: #a71a1a; } + +.card > .sectione.dark { + --card-back-color: #e0e0e0; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #f0f0f0; + --form-fore-color: #111; + --form-border-color: #ddd; + --input-back-color: #f8f8f8; + --input-fore-color: #111; + --input-border-color: #ddd; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0625rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0625rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 700; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0625rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0625rem + var(--universal-padding) / 2); + left: calc(0.0625rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0625rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0625rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0625rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0625rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #f8f8f8; + --header-hover-back-color: #f0f0f0; + --header-fore-color: #444; + --header-border-color: #ddd; + --nav-back-color: #f8f8f8; + --nav-hover-back-color: #f0f0f0; + --nav-fore-color: #444; + --nav-border-color: #ddd; + --nav-link-color: #0277bd; + --footer-fore-color: #444; + --footer-back-color: #f8f8f8; + --footer-border-color: #ddd; + --footer-link-color: #0277bd; + --drawer-back-color: #f8f8f8; + --drawer-hover-back-color: #f0f0f0; + --drawer-border-color: #ddd; + --drawer-close-color: #444; } + +header { + height: 3.1875rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0625rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0625rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0625rem; + content: ''; + height: 100%; + border: 0.0625rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0625rem; + content: ''; + height: 100%; + border: 0.0625rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0625rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0625rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #aaa; + --table-border-separator-color: #666; + --table-head-back-color: #e6e6e6; + --table-head-fore-color: #111; + --table-body-back-color: #f8f8f8; + --table-body-fore-color: #111; + --table-body-alt-back-color: #eee; } + +table { + border-collapse: separate; + border-spacing: 0; + : margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); } + table caption { + font-size: 1.25 * rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; + text-align: left;} + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0625rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0625rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0625rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 850px; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: 1 0 0; + margin-left: calc( 4 * var(--universal-margin)); + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: 100%; + border: 0; + border-bottom: 0.0625rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0625rem solid var(--table-border-color); + border-right: 0.0625rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0625rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0625rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0625rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #fafafa; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(2 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +:root { + --table-body-alt-back-color: #eee; } + +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #0277bd; + --mark-fore-color: #fafafa; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.5; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #444; + --modal-close-hover-color: #f0f0f0; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #e8e8e8; + --collapse-label-fore-color: #212121; + --collapse-label-hover-back-color: #f0f0f0; + --collapse-selected-label-back-color: #ececec; + --collapse-border-color: #ddd; + --collapse-content-back-color: #fafafa; + --collapse-selected-label-border-color: #0277bd; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.5rem; + cursor: pointer; + transition: background 0.3s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0625rem solid var(--collapse-border-color); + padding: calc(1.5 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-bottom-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0625rem solid var(--collapse-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 850px; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.secondary { + --mark-back-color: #d32f2f; } + +mark.tertiary { + --mark-back-color: #308732; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progess module CSS variable definitions */ +:root { + --progress-back-color: #ddd; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.25rem 0.25rem 0 rgba(0, 0, 0, 0.125), 0 0.125rem 0.125rem -0.125rem rgba(0, 0, 0, 0.25); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0625rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-default.css.map */ diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st_2020.css b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st_2020.css new file mode 100644 index 0000000000..db8b406aa4 --- /dev/null +++ b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/mini-st_2020.css @@ -0,0 +1,1711 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for STMicroelectronics icons (https://brandportal.st.com/document/26). +*/ +span.icon-st-update { + background-image: url("Update.svg"); } +span.icon-st-add { + background-image: url("Add button.svg"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo.png b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo.png new file mode 100644 index 0000000000000000000000000000000000000000..8b80057fd3a454a97de1c9d732b7fede82c83227 GIT binary patch literal 18616 zcmbTd^-~<*6D~X~?jgaQV8LAj0X_tm1Ydk1xVy{Z3GPmS;IP2r4oh%%cMl#Qcz~Pl zz5l>lZ`GVRHB&V|boY7A^z(F|Z=Y4=aIwg-006*MkpHOuZ?5<^0x;12-SsK9!v0Mt zmQpHG08kT${nrHb-!rC@ysj$%ki7ceKq56ESOEZeJ%x`_nqEey{^(v>eK${gL>pJ% zX8+KBAR_W-jhDrs{egi|sP<73DP`UFoa(>xj;8qknEx2bL~2@t%3k>}hnl@CWQrW@ zqfK>@e3$sL-m%ftg0YAkk!@=P!Ognuz(zhb|Tux{FeX<<7(5oLVU8=W*sUZ*$TqlSb6o1O0a zzeP#ZW!;?#>0N5v?0D|q?mzD8-<^@1V0FH{fY}2A9ooXbylcB6Y>PVo4nMxLi|AWA z8M(b#9`j|%0v7ktATOSzsh-T7%Wqa>t*x!29M*iDetE6#^`?iEoQW5F*w7rjcWYw>-UyKyDHetK@Im)qdu0o-zudq@gQN3)r z=(%XIh|%7(Y}2mODA6--)=u;7mi|lUCki50L@QOyZN@2N`Bwwn9et)BF?yQr9`Sn# ze!a;09%cuNiCJ+Hwx|5Sw&L`0rJvq<$7D5j#Y=O^YcW)1x!+MVRWRVHrXDj~g@40Q zBvp_niE6-dasJKX&t@%;X`7_R9QhT$w_Dv~zW73kCM;9WC z#^@^R#^^HZ#`rQ5ZjC*^uYUMgw=ae5*IV2JyEL@LlJ1k!yA8p=fmyQ={`Pjq&sK}Y>k9r>*Y-3njDRLc8z*D?su--n+y(fpV8FB zwS%vLw=L>F9>rMJzXaXgg5NRvaHPKO=qdV`%ecKE^q=CNs6^=Vl)5QG9h0>AKM-1F zvU-S)!Vnz~yg}XNmnaKSqm&}<1}#nOBCWZsLvn3_pkm8Z)~*KF8yv=yRk*!4rf$7T zT*ey^g`%>`O82HoVNPMCaM^5e_Eeop`^`Wsro=Q9SzJ-{LW5j1QdRH>Oq5bEX({TJ-TNGPvNBrk5{my=8FEQ%0fftv4 z)$FK)-usf%cyd|Y@=r@u!~HI3-5_Q=E%R!AkEqtv$Yv%Zit4K`i*n5tM!wdwLFM?% z@N0D&tLS9%TD>`41R~`%HzXtZS6pjo$}fsAA6cq`&Llq^TE@#ID4eU}(xZH$-0oa>g$RMe)N_S(=w@nXEL&?{|e zd%-=H@Ei^9kz3up?3!?QYr2O7^M9)q_E2E@^vESGQ&5WzDh<(QgQEd3BICrRm8O)S!fPO#z(h0}Vk) zolMw(Ecl!UD7xMUH0>?+9qzTMCMQxcM+Od*!L7F!tiwSSG>D@|J~*c~gu?`RewztA z1cO8*h9GGR{``zPp9t6vZJ81Ar<-bz38Jv-ro`wI#Mq&-k$*5tL<>Pk=)T1H_z8YhPJDWCuq5c#f&iDRo3$~XHhc-#T3{whJvB?;N^IKpX^H#=oYNa@u&^9He20t za7qlYKRH^S(Tj2{XC=lPI|MVMOVVX4V8cbx(9Ix%YK__iyN9E(k)118*aO-OzZNT# zbhE^f=Cze>bdhX>8xBFW70+=Tb@QnIyKKmQGt`}ZHXrVVWgxIT1k&eFDonM5iFh{^ z;FtT_qYo%x6$`ChDD~;i`c>h@T~X~pZ&-v==wrV4)ra@?=39Z}7c)OR&&9#@9uxU( z?hh)jyY_o}tH;1B>v%95XoGM@gDYB{I@;aJAn;N$2z~uDX|IL`uf-*Mm1ic21|E8c zQZWw`gvb==bz|iv=774j$zii$vlW@T4LDFEfea$Z+frqVA{<)qP_mhp2AbFqEE(0z zfCJgi{n&vKxpSY#-W)(E-Y3u@1KQGcnWN=qz;Nz2-6>bIL8wZk?oy8xe49zo9Evpm zI>QVA&&4C5*aCjxksX%9lfPpQNw|#TzMQ;YvC%Rx=uA#dmU{e@tzaW&rq}9N5VXBw z6Mff^1He^5U}j4TZD};Z7u2!LZ@OjGIPgR|MLZ*9%)E@0nE%K=W5s+NOT~n_{fBc9 z8DlU6un9om`MN~!FtpPXkJSq(+KPHqF&N23_vGeqphc*cEAF=okHGoFWHHWTm&R zAZXR)=q}Jv`jsvKCoL27h?ylNq0fz5xasR{P`5RW_7kzL^b_#T@e?r5nGKuMX?!lz zcEq|hYJscWj{YtO1of8Xi0jH z6s+!rS0;ag(Cml~|NKB+tNwwq9kl+8wc0!T$L$CFw95drNPiuZ3jOf4G_NXoM$sQj zZn*2v3^ISC(OoqO%W>m};%SHDOcD)D7%f&?jnrI9&1_u;6m(x2g#=wb zH$Cl!I6f#QI6iFo2i^nPy^8_Rt0g@Gzv3FoK629)r#wPie#!P^T*B)9JDi>Qta-Ee zyLS}t0#vL+3WcNfUo47o=g+h7Q(waq$0Fo`#^t+!ugP{n=lV`j6a9^vBl)I!L&VaI zK(10FWw?KM*=_ynJ3HIwyD^##=aKUk4u|yIYk$&C>^B?x{I5c+Il`m3RQ%_=Tq`!D zQw3HQ7dw%VR~rkqeqr+THi``YT){njI8j~%3VNWBl3EUyQ zx>y&BaDTkwjg$12&1?kD`IcCB_?j~8XMfHm4iQ(TCj7-)DOn-+%UzP)ab?nnNlfTA zh(FmGsK1tl`G8>eb=1j~9lDZPh<*?zhjW@Gx5%UjcH4 zbrrd<#%%JyFrW`_Loz= zP30^V%kIB;=&%K@{YbXT6@(|c>dXlNk~?15SVEmMX6`Mjv>+MN2M$^N?ju|1T-qoW zJQV;x5rIpTc>eCM*`;fq^U3U2uW>l1RVxe^4B$CEub2J}+bN)$=(gE92((ah@ar_) z+I|k<9;iL6@Dyhc+LX|pTR>r3{P!==s^guY!a#cZ5Ry6QtTzvk zUh~+ICB=TnC(!+~G1}X`=zKbJF=VNy60Le=gO@j5lEJet5>jc!PbM+D!ZlS$KuYx&pkm{S?k)BU1<65@ z({=ySGqzCiV-vc5qOJ z48y)rR(Ys{uWIjyQX*o`4?xK$K9nE1K!t$coI~(ku$IzWaVM`ocnY1)=&_o_R%I_2 zZ_{Cs>@7#7ktZS)0EENs++_HHh39c*#7z#Pyifk3+e!lsET`nm%a#Zp{hflp4Vw$+ zOju*)#0tN99xzE1;G}_c;Oj@<_%Z8;SCB3P74uOYE__wpp<3HB0g0wsxZ1toEwg)5 z23F}NQwRV%3UQi)GQQt^$a%zzV8w>aIl;CkQ!6h%=n!jXPZ;sfULBWNTi1QT%V~R| zdrjBQt+%&EcrjOO0&pO(SR|R1%nis?Q}KUl75Q=`bI5TGenEMls+QNXGp;Grr-EZVy`f(ovFSmI(u6D90n zU}rWOG+9F)ioe9yO)lx~AD<~|_xP=uVs4I z6w+kccIU+(Ltf0bDM$mvJrBdPzjnQ4w#L-qTZ+S6V5l=pqj|%(!m@K!R(Sm5G<;5V zXK~r#d34;M-;>*+VXbyWbw`4vdOanA^uK`Ag&w)G;7}_OpATxWe^GjFe%&*Ocx)w7 zwt4Bs4luF3C-9V+n~E!?(W3d6$CtEn7OZ{~I`6iW|1x;QzkF49GF&d=Wg#fC2^Vn?KLfW@n~pFc4gBpg!U$uFR0 z6`f||PCJat3glNlwW|z^j;^p%9oQc82S&N+!L>xWR*UT~JbFCj)0}2J6c-rV3iVO! z`IdFp zB0H{SvHRu;zx(EM(0%j9fA`HVZ|@5Oo0EGok@w*1K*{Sg3QERYynQ|7kzI{t_?~>T zQGQ|?TPR(EZYAFen;>d7>k zc`O4jwao>J?dp~fG@8l|SBHzOE5h7?Ba_OYs%93|;KP${8}j%VGb?LRi<;yffk06& zmc)TH`g@-+zt@fG!z|MO3057>Y}ppB{w8IS2o68)NnHSA-jKa+X$k+&Klw{5Ksly#ye_HBKV&h1zbIsIT-|0XRq)zWf_~s9{=n3BOfpPy7{f5RZzL^9tdzjj zr)R?-SV}4UX;&dWNKq={6q|g;FEbIjXC}?$K%uY_ur_MF+MkJ>-c@8l1|6F7^BR4N zf%t(1oJ!m zg^z<^ddW{6+A~!=F*1he)s`5=HR&3O@tjq)pn!{ zodn}X=d$=iUh-ibxQ>PQw|#fHTLppRwXG}*HyUkLKB?Vxf>#@2_z&V#B0Cjvmfka$ znI~k?Pp)A)OXy(kdOeH7nbmp9bNb|>|e%T7Dg>BKo&y=JzU)v zs{+P#O$)wko3MOQY!bv_78@Q%uABK!ZPIi<~iCxyQ>J*D53j_;0vks;+?UxqO^ z8)9k;>&t3F)oFofc_t(0cdCn(OIM;4fePgKSw+PKcigoQR9JV_C-y`&%By+|aMjTd z;$iN6>#`KNXtG+yNhfl+PYn(#cr;Nf>DZ1mRU`A-PFI}Scq~0EgRR31c4LZcz_w!3 zU&-x*oGPQoz`-m#bYEC;V<7tHiC(wn395M}YNU9p|6@2$$6(9N_DyMjuOwT6X&Cu> zXg1{_^+%NsBhDf;)3V~J5%bl|^XVjqRgu^moR2288%NOgcLoNBkN6t5F&l2`tPvao zfAbQy!&*Ln*uWc{tVDqwT1{Q>{s19S6+;c@2e$2eZd>zL~I~M}G^8w4Y2bnyq)>=S+L6j%|@%XWqbYm%+}R z%Jg=|X7Y&0*lujN6>tzy)?{CBuT|FT#I=sU+569+)8oyIH?8?{Y{Im(PMHAGs5_GI z>1wLl+yiE$+I28-c2!jx)_?k2nIm}7iH=O{X#yL$s@}hUPf^xece9Vi{DUPRKm%@= zI4q=C$Qla?I0{;1W!^-Bt)o=r>#KNZnZPW3piq_&q`~HLF~1_^MHlt66*62}BJqzu zM;g!LlycVJ?1ohPMvFHu3^-`<`sR(iyLG`EB|;bk%3GG!#?x`m5gx zWnZm7bb@UTrR9OXVs1t)?(5a%Yqq>?ivrob2S7W|CH$C|Kscw z=5hgFRsHTTA{lDQ(a0VW8vk$By+wL4Ao<5{Br)oU$x2pMfJKrlPqr@4P$Y9Nt_7R| zCx>hhMeHtjM0mJ|?T<(EIY{^^cAiA&R=2C=g&o@6vm!E&&86BrLOf18fr==x77OBH zdyOvB1fjqxDMa5;G9@=qu?tN_vB?)=#H^qB;g*jHrr^*ISGt+pLXyWcu+bAWNk&IG zl?zGxV&+)tmQ@d~T5Yypa4*^P5t*t6C($W-Y9zknsGLXPPDR^RF~`>QcV4iB%ltJg#%JgzSOl!L!d<7;Gfa5FAv zjVdBTD(TpZ3>zF8@VbIAM{aYtDv8fh>oAmOoV`*>G_abe#aOPM+6b%!IzPP2K{>A5U*>>2+^+79)a z;+jQ03qhGCNA7Yx7^lX9Ba9FuFHNen`s{buqNeEv)$x#QoePK6M~soRL17NVafu`4RB%F$`Pl z5~X9X{(zDkw(=x-=6pOllhfSrJCozywriAokKZ^VZ?epc?F2YfOmC=V98gW?oL=*# zC!4VJtdyAXwE6cHlNoijVy3KiZxeTrjL5AO4?|IT4#6gV63bUTC!(fd*MK@3^J@F! zOg&Y}^l`KyT>$RnH8O17_%?_PVh?o(+5L|_R7c|c+R_PRXb26L8QM&z+5MaH{wtOk zn}L=^TXs*WwrBLOJ6hDKim{LKAa3?WEiRefh;#TMZ3y1zA%QAUYh={Ux!GU!o~ zQNH$+pUp$BPoB27%q zF^6BflF{;t=SZSz+GrMJ3q~ti7gQ;5SbjS`5!DFxQB8KOt1OQ(G%_V;vcdj>K_dXjNxb}0M?HyjDs(afDCVx%>+I2GAO;jMfy0Iwh$=Utfm z5snMAm4|C3O1?MDEQ%I@RL1I{SrN67(Q)b*7k&Ip+-THJr%-;ILx=v!SaW75@EH3` zUhVOn4CYZ>iZ!iaGNBq9Be`Mcq5Opf?{HZfcJM-VDr$qSCy^3Lij|O&UW{&ffZ&!( zaA9$H9_5lFs;vRx6|mmn{Ic~u%y*(_t~*m12^>%iUOQ9Ap<@`U;!iRpBZ5y=p}@B6 zSP;R6QS{hs7)q75Mgj7814d~Bae=<{A1Z5>;LN66N?m?;5pl?`*_wW1l4a8IBb4tyR6@^@^BOm`{tD6YyAv};)Te2G+K}4;<~T9 ztiHbWTlGjD1=omQ_viT9PJOR7GjZ^{`7u?a_$hGpx54G9Z4Uj-NJ+>3SA0ZSx1vXw zLxYWusP2Sm*#o~_#B)vb&lTfmtsonTnPHIvx!#}HYvp=bPcZe zcHOCWuo0{MxR+#P#Pz1PSlaT$g-HbB!hTlHpV_F!Ay^U-vb1-6W)!xh?3imeOv*Z3 z=D=Ij-4e>!J=_Q#nqT5Fkomgv(@3uQo!?=8R9Sw(0)&ni z2jsV8*xm^OAO91C)$^*!X=%ZHvh_G35URQ9mZ|{A0)E?gJcL0T$H-NA92s6VF$CYW z9RHBse3R!V%B}9#+)P1_9L@j@2VcH-GZ=N2{$k05r?kj$KxpvthW zd7m|F4Ka%sEOHJC`oN z{Q9h2$S$VYkMHBEw7ybMx&7`nIaMLI5n~s)u5f7_tg^|2p4eFF&|6C45|-}T zY2bbCicJ7u0b>nvzMSvbBTOChoOAKvC$b5)Y}lT;{a-@oZBJ!oQNfsC36M4qtjvVR zX;Qkn$Pw56!sOMyw2f6>a4-#^ zy$1D*lt}-KofQ^atUig?;uYP;un=4nq7RPpS6+7^7eT`a+9Hs&(5Wu`IyLv0kJINP zH{2$kHb`Me^3C!975F7KG!qcJ%Ot-tp1f*bJffu1KR9B1lQ=XYBq15?hlJ33*QN-~ z25i$#OI}x{k+-P3EKo3v2XVk4?t;KE4nj1dk!Zo@w6D?!o#k^~T|3?;an*{_dc}rZ zWWWrKbdBu0k$7Zn5A%~0$lei$vU1P?CE&!L*!t%`ziuxu= z$+Xt=qUvFYn;a&JSK-D!mWnDWtF|5q!R|hT$Hv!*O-Hv$ zFMd5*W#~$3AJN-2|IVd@2bWN6TIfD_0uz(~vS50vn&4k2seimRF5`Q+1IS}!NNHN| zuWuQz50#5kO>f(wTSg+{VKXLrOZR$Gm~DhS1f%%-9{FGG$s*ZrqKZL|g5VaRU11N3WB;tGWJx5jj1rPZ1}$YE7~gsu zE25FmauDeN0tjmI!T8LA_@Jktp-r4gQRI3~pz@ext*^u56U%RNNACtB2^N&i&Zkq_ z`%gV|mr`$f?Rog-De|tRlA$9w&gIG-7Zqk}`K~S#ez0!r0TA4$*?1vW^S1eRHim+x~x!Fuo?ZZGGykdj`C(v!pIX!M7^#v%t*g zcznI+6jSi4g8knZOJ2XD^*-Nu8++1xNL67@Dpa}id>w3=oC<2l|TauHqSGbyr z9Lb=M3fe$ymZM2IcIy2$WhWPLfA8YEy!~$2XHICgk})!EbwTa@re-=DC1|8#7fNFq6gJ2K}GKAX`f_@q32jY5x4yTSxUH;`}j*L?c8b@JA9D(4X1n>r5 zmjA{5zUzqX9?77@2f4TGSC#Gv z>RXD%m8Sx#GLz`?10nyLA3f`rKtm)2mp8 z2WUMD#ZK*6rx@tHUO&Z&$15&*p$9S&RarVs7nI?jWCTx!i z0n`(39&^Y>ScN)8+_K-B#JBi}jEM2qqgbCqWKx*4*ll_rs)9n)b|4=f&23 zGJ5Ub{5j_`P?1;gHXtz{3VvNPjI4v63M z7VR-O|JQRM-E&ZagmZ6Y#+`oTU{Zdpg*T>rA?e2lXyimlx-MsB_vpS!^2jDQhm%@q z{n8XwoaYQc8y7Itb%2)$a=$~0tev`)%-s+AXZ8I@XV4DuPx#4Z3^R?1Q&1e*!{+@j zwy0-{m|^s)xqlSU>jQk{owo@5+inF)-p_24DlAw`pUe~G8ATB<-h>G97|FK_kfkQlN-!Xir7CB=dF)cJj`)++W>CeZ z0KpG5Ul%&-7q_N%mRtvtM37+jS>A#7p`RadxDFCIFsAEA)28 zRc#)^^3Z1>`W_P8_n+_5l5pGfayTk_=7^k}d#ir!c>8mR4k$J+> z7$;sN^3k#e1A<-CaO6F6V7^1u(puc4hVnfPK2u$wSE_XF>^Bp?OAv{2Y8)b{(a(2LFQfe!w)T1x>k{ZpuhTF(Y6rhpZbrH!ElxM! z5seXw{2(-vFEyNn8P2QzldxYgR;$=9Va+n>oR-HQXL;u7|E|m|OuX!t) z=Y4P{a-kdSJHXaCvpi=8=DW$Bomevgq&Ys4T71MX_~k_QpcOJ7j|>5e z8fKax8KCNY#00?1+;-F_`mYl6?wiA0M9-%AWH7g{~~uALu>r1q7;w|*!aJIeE{mR8WtR@KBhs8TcC2jA=CW|Xy-ycIi>d)c7Okmo?_;IS6kWJ z(`FLRj~hxiQw>hGi`}`RB+q+jpRWZ9z114q7dyj#>yMG?n=NfcSz}CGOi5Bt#D4u( zFREX`PCs3=cqxne=H=$udT;=|-YI7ij;hPlH)3oXm z`Zikh-OIS^*V9YKw;%r4iW?YA#ppM%LKP=jnMYQ)JEBqy1t4U@E<8VwMW2U*KvaS5 zNDwVyHjTg6hvcbS>{N7lJu=~^Ut)S#sq~v9%#hIV2H~>o^9=!kEGypac0E4e6TQIW zr~+Bn`Sb4k*0*Zts;f;Vq@fsZn1hLBQyIO8W(13u0211vHK)RMC5neH4xx7?6jMVOl3i-ENH1NU{ z-FW1hXwfmWi;TOg`k_dSL1ckNlukjE5IiKg=2DaEcWG#qTCd+ts`vavz;Wye>fPE6 zy5Y~H#6~R#r29XgZcKEUWF`#TkPjT0Tb$nr`$rM*rO!0=z{AwY-%*%Y>1iy07;xo= zlqRRR7Oc25bnNStf}IG@3`}b^k0oTD!zg(19YJjRnXs}9jracK>Fw6_hgpNk9M$d_ zY;%@p@*94vn6~^S;rS|c_SBN9%41Y5CNDz~xgJ>zs5bOlC^*0Hm`3d+UdEAQlhAJ~ z9rS!JpiEjf-g5TxWc*_}=Uu;kRBG#hg)R{HVt_KfnWZwXW)vK%qN^F`Uk1yRWlJX^%Xv zrk4pFBKoY0c4V8}-7;k5jeHn#no6bE=CpUiQ*YjAXr&^e4Ji=kd5l#`F`6lq$7V{v z3HxGM@4$C!_rCJ0-}}J#b+>i@#M5T@ zDq!my3QKfc?}%tQt*O2KZN233YvPN6nJ}^KNmAv>Z%4u&!~ecZRVXA}Vl6Juc1QC% z^+u0V1RbM%wwc6J;|v%G|8k{t}#XaV3b2aS>;{E0?a{QN?D zjap1}Foj*+4gOfLe03+j+-fGX6EVmh%q%{kCs18^=Y$ttM`Ru~Sih(@mxvo*(|OHJwq(zE2(ex%#gkzo*Y14gL&0 zb&R`Soa5K^wB%jo6cc>zQGL@J1IWOVy&G6nrZ5tClv8t|5cv^+Gb2^+T0kC3kdVb= zzt>d9Y8%qhJjVP{A;^*2E;@stxE=CCM8#hlN3jEzVQ}z~l*fFX-3jF?-%dnrKMp>* z+*ojsjy{>@Jvb5ZmHokSc4fmUNZRBEvkDd^(WV&AoGicLZM&xx+F?MzT8H=FtNK9| zS}XSejv}P(R*P5=IL)L^{d8bx{SC>9DDxXj4@z-n^Hya-p}k%LC>kvh2A}eK-{n8P z{ymeI^r5$}WuJ`hTT7y&m(wGugFoqC45jML$-|3L7JDo`mbG@4AeOa9^F5Xfc~AdJ z6z*HExRMYeE;qZsGE(eCPFCa$fMk$Uzn)5Lqpt$(K3(+J)whl&sJ0{&+hDO7rV zmH=Vx#~{t)BZI;GL9NP4eoCJAPi}V8s2_pM0^Qn!dLjeT+!j52$p%MSaS9-1=VIXE zZZI?CV3-Z~UNNk|?P_bEXiaFvcS$(=j(imNA_Txz*qk*3Zt> zNTsgN3vU6G(NEuWibkSSE-gZ&wr@}`tuvHEIJGFQY)vT7_Sn%Zf>;noCdR{II*9Uy zi1DPT!QZt9edc?XCO_%vF)Vha6tK-jiPV+wdZr2-8Z+moIE4fA9Um2wrmprd`ujDw zA4$!<#8*6C%(UP!wX!r@9XeCS{UX~rhBT6- z&m5@`REID~K)qRRLN40)>Fz=?P=C-jXZA1}lMo#Lic@|(zYtC?Sr$}gjz;wX-)dH; z>kQvsjFQ|FEvL5r4GE`Vi>HJ+qxMkQH`jx)M#C81t{fBmVaUEu2p_>}$^Lp*OiKYZg_C_ycw2+?0OT`)la$oyQwx zn_edD@HInp4-Gny;i{I~SnCp_RpFSS_!Eo_CI3DYHotlBCu`)~d17BV58M;K#oqAY zMpX+Xw9;xj#wpOozs(lT<+Th^5&14m(|Q*%;z`vKh4SNgAVBe}N~g2sLPrFC2|fE< zFpnnM-xp>{8@7DssTYKd@0S%KXilVkqrjiHGyiM<4X=4ToUoPe$O?bRyn$W!y*w+D z6&Dp2t9Ct*jrJO53Vv$UzniUP=-;pr=_NhmXKlFLRkmbSfW7QwHhvWb87Y|_ zx8ovSSXKm9h{zGnW$Hh-iI?ZMHSbjn*3Sh{-$#hX$;rQovTb9bL)q_$Wc zZmKiDhCM5p5vXSn($(MVPz`Tl^8Dq9O!MXzxdIh}Yi;I?zh>o(TXxwNlF}fbbJWC- z#GcWxTx796z)2UUjk&XWZFb3^oh-r)7Kkx{urkexT2D1!HLjPN~zvz2X#hz4#kSWLV*CW#DJu#do;exLU5E*Yb2H*HhXE&}5w)`L0O>xl{F?nRCT2 z*sv_q70&aZdR}eGSdA;#MccWyIlME%-v<$!Uv*^qnA&%(krwShZthK$iyit6H#l;> zK-^@!-w;mtEMfj7rnxx}?MKV=JHn^z-cHiGPN(d-mV0j(9hnwwg#l4%su_AWn&D=e zjR-cx9)55a@TwJcUi!8R@A2vD&T99g^diZcn-!n?8)u3269>8(cQRcMciiUGO^eip z5B)0E8kXbcz#sx*&|^TUl$Lb)lb&Ip>#TdtDfUcwzE~nzmuQ7EmTjAgdgUiGuSuNa zpCb6rE6(O5o(^pW-+RuE)g@nrZK=PFeQcL58r8o>9J$FQ<9+2A1d*DBdQ!b*dT;;4 z$Xo4EWN=S2^E$tAy9hSL=6Vn#bHD2g;0=sNhjJ6d)KUocZ)+A6o6_A*qTK}$*h#RS zyk#XkuOO@^1ht8v-%9N{Y9oewzu$e7L(scb^mXW2_TiW*-y)vNyH`OadIrI^Y>*Zd zp?=ROXFoq0Kk^tpwCFt$B)QKsZPM$&nJ*fs2;Xd)FtPd@FMUTnfVUp;sJHFaw;TuBTKR%BOW_}ClL_Bhz{A0l{Qgc%@tjIWj2ys8T z-56z(;=%E*LE!6!#2)6$>Eq4>1p;7`)Z_NSc1X=l%@0`gB7usIOR#p2{Cap%H#@u+ z`w+GL;VMer0DCjGMC|TGF_;&EgwZvSq=Q8@4}X7rF+n51h%CM@hl5WX$J z1a?I~km{+qh|RA-3+BNxgHjmg>KA!Bo!rA$QbB?cckI}KdkcLRox3JZd`fkXjx#A+ z_&En<1xc&Qmnoz0c*OV_guW?$J#uUHP(jS@beks0sZ#) z21ebzv6U?Wp@^S4Wn-$u_zmK3cE*C1Mlc5xAi|J_lu9>vY@H z+=VfBpk=&5g2V=pY;m2PHSN1`4hDAzs43VInEYm~-~S`AxRI%f?TU84wXtx z=s<1xk#OUIW)~ZG_2?E}ncAz?RlZ%Nu{wqJtc71aL~G>$Y^@Cl^I zh)|w&6EwGxERMm32{6|adN{lmCnO=?!|jUP3Ws1;e!SWGzjeq)Lvs!ZTTq&ie5vo- z`1p%Yqwt8KsRfc+Zbj`#L-1}(Bwi~Ax5qO&ZU@{ejQ+Hp4mt4VPoV_VeCr(6zF z9UR1ae&+2iX+s6E2V}Lxc6ZM+-8S6$a@?&Cn^C~=sPX~d#JLm;5Qw1n%IW*&PBV?q z09O(5{}gEc5xG_jOowcjF=x4y(&YamY5r}Y`?S#80Bh&J&-}>XgL{roRVEZo{x*i~ ziq&;TCj2%^Ju@%&4lTnyhe)5-5PDrQb*+9kAHW!EOaiu61g8cl_=CS1bA@HjhP}H5 zEBJUSKy2WF;ua_T{{-d-8TdvHidCA`BXq&j4cFtL z^yXVy20#nD1@%y@Y5U4sF1MvXa8K;F7B|Z;gH>tspveGY5S|}@U_A#|Imi?6GS1f%=ROP|BEkV#WqVG3b_;n2 z;H#;^adfh%ovD>w5Gs4>tI$7iJW3x%2mWus`fl%IFZf2qhN?JgWZYM_WBdsAyZ9Ln zRkEUt($@b`?c4fgl`7mn2lzu)}t zF)QPs=rMRr?Dp9+=yMv@`)?NKswHtVMS+34S>A@W)D9NFirDEhF)P8UhG0LzO-*O0 zw~iYtAHX;-bhAs~r#R<26~a<=Te-BB1z_}yavF7s_X>@Au~8kI-fv?*ch&2-MEDeRpn$| zQs#J6{sP}E#c@zKLH{=n*1NNgxp^;34)cyq+y$_nMaXHdPefdQB&ZYuaBF&F+#jI) z5iI(HZ*=0~V#^Xg^oqt{LGBS3`Mzzz-b6=qrl1#6B|u? z)MRjg9LIM9!?@uFajP;=#Ssg@2~wUs91pUhTWF1+X;!z;#!7zZ!HA3(S&VVh0-H-7)D5Ez?jhb5*13LRK%!y+ z0JbakM=Tfr@d$}P-7SM{#QqrU2pOeg#laPR_u*ECoxGxwD+5qp7mJFAC4KD`kx<@y z!H-TwF(`nXfja!2zxynS|Kfw?Nv{=+iYwx~iR_4 zsDFPJT72Tn&;L~mWIpqIHR?q6{H5=03xogjIQ00LT=Sm?Yu??dTo^X%GTU3y3 z5U%wt^lQ~lI;@oqpCR=JSG?o&&sGC)JkTBL$iPQn)gVhj=u1Ww=)nAbnfA|CTF1W} zHDFT%X57(fTIQ+HQ=ZLM-4b?z)=H^8gSHr jqXrx`;HZHtT?79Qd=?ufS>7*000000NkvXXu0mjfyH5ns literal 0 HcmV?d00001 diff --git a/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo_2020.png b/system/Drivers/STM32C0xx_HAL_Driver/_htmresc/st_logo_2020.png new file mode 100644 index 0000000000000000000000000000000000000000..d6cebb5ac70e0594cbe37a6b60036a80ef3bed37 GIT binary patch literal 7520 zcmcI|WmKC@*KTl!K!Z~t6qn*&DDF_CK%q#B6QmH_DHL}I6b%;K-J$eBN|2xh0+bea zmtyV5bG|?CpZBcu=iF<}z4q*xz1LhL*PcBwx;m;Pgmi=e0DweYO-UaBz)*UWZ}4#+ zCC-V!SC16}H#HLv0Dy?%--0o{5_}H;Jf%=ql7H=+dziOk_)KzUSaiQ9L<^g!49k}} z?4y$V zrsn3Ul^TY`00G_J_8;F7Sr5c3Y)f-yOYl{fS0avfKJg7R%r!y-ohcBkr6XBZBkE)( z_t+tVV2}G1_CN!)yWes*wa-AGwk31N_T1`)4COlfz+o(9S90e?6jHV4)!>`j+oRqp z)gb?rtSdw<#&c?q!OKB+Ncn!kr5JR2EYan8HAPXBw*Oh-F(6GmaC!`$p7fl!_Cdu> z5@PUMR_K5&jgevDepWqepZVdMHR$q>ga=7k0ltW$HHVn>HRa!#(+BW_jN$5rx^MtR zzWT7tNWQeFzEp+86jOYI=I)*GZYEiXlf-Mw%tJ^ptL%2)%#PmUjxC4wx@%KxQ)8kO?|7E1 zd@5gd9_$*6nx?fj*iF_EJT*PYLFP}d8*Fw>cu3@&nm%V_C}V7HMmg|Nl#1J1^#)uz zZag|X>{6j-myvL}3(H8o3resNBq_jcuJuyT!QuXnNN&zG^tG? z>y*dy1#XfwyCE#UiLT(~LYAVwp)epErJLsHBA|l0xo)kxLAPob+7tFlr{7x8(#v|O zknK}QC6|~=cTJ0;x9MWMKua;LdTKIHX>35a@7{5y0MQ|zqsP64mM~`gJ&&R{pSUBA zf3Y>k>d|xdzBFztjtO~{y%@LUdwSgzEj=69hH3-NNWx7<|49%2%lvTEeE3_|$~iDd zlktnxf|NB>Bui)yY;%TXgWA;rhODxR!-4GzxKd473I)3;j zS4-Vun<^vqZ4)HbwVzq%5%)S!>Q(Y&PkF ze1ab_oy?_$PZT-mKJ3K^;6MrB*Wc$lkYJ_460AFYEq{AjlDxm;5GRwOsm>doJy3Z;a$FSu-q`X)Hw&o~?_`Dnpx4dOj6#)bGOdZbj4hD`l|&#v~K+WrGO zpLCVQg=*h=4H1sK)D*Pxtb#p`c+g-eK65k!CEZjLIrfm}5<4@KVqZ#8(S$vs{?Xv) zN(}CKeeLR%I)W!p(l-`utKmBbJk-On{)ciqUN5%?TS8uwKU(8}Mxhsb&qHL~DDcB@qi} z4z%efV#K69a#lShPt5}*7ME@^xunFR{k;|qp z`_Hgdj_Qle?%Ydlr3f^SdRkUncIj7qTiu85tA$v`#419Nlof8tjqUjO z!Rwyq$Krfh`(@MiE+)yie&jU^crprYV&?zN!2b33S2qtW+zB$nahDhVZiQ12bmcwYBcT8KS>v`jsuI@X zy^k^7>TM5Ndp@}pSl6vmkk*u`@C`z(gq||K2>y=Y#w1i`Nk2zAP7{_^ACq;bQmT<4 z;b~K3=?mhZX#~jQnZjdU={NFp^HRr~;^PXQ*UIHzkq}Xsn!56*ZCOOEt|^ zawUwGqs;zCEGKTz&(a(@h#0sCE+@`3Y<&}9!(;Pw&`C+d#D?`##&!@*ERaH0fksrh zfk2svh3!d~h{SC6BNKN2j6(lzC>S^_*eh{@gR zP$rV4$nqV1y|zYpd;nQr-`Vlp(5sQXx9AibC?xc7pUV)v2cWfHu3{KLbfP;;;`I&)mWqLcXt6s+5fps9R?K>hGR$5;=( zo#;zzQ5!w+(99p1_gh^?F#$tpMd+4%G|K`XG_#@A>30WD2L9!0a>wRASg`M?^z#)| zifb$d^KUD&3qLsr-@}r_7p${gdmRqhy819bj?yI-v({I?0o3_8d>CZmCzqH4{{QtD z|6dvgm<^~668G`6wLw4C4y-o9E9ZG3RiH^&;rrKSBT@bMR+!TlYo*9P;?Z>xORMV3ndQp9EyNn!!~j&x&$gDVke|t#!{QoegHm+sT7cSjwSu z)jZlx1pHrrx0&YCZWJ4xC&U%r_IwfJOxnYqYMcZn&_hgnKuls z>(Y$qjIhcweo^A_VVq_#UR&urF%UbI^><5L5zbV9owMQviM*_{@i|dke!!v8a_yG! zl%#ay{(6U_N3-)yeif3tx6>aQSf1r zO~OuNW<8a~bi6Xby0@tKw0@f1R!@+3S2nf#F&j~l0mrNCtjoZdPYob?g!Vx4F-uA2 z4uS>8eR?dA9i>C|cm-m5lO0m@$f(DB6Z<9Pe07xR`l4$ks3eZ@v5}1?^YNQy-tB(` zgUNZrGVf#b~`}jew;MQG1O~VDk_i*<)p9DfFfd;vLy4QZT zMYh|DxJg3-!{szUN*uo&`&DUkzq4qG2`Lj;Ar46DYUymcviS{Unhzmx z=LwZ-Lr{t1z?9Oip%!z{j+Z%_@u?C78I`V4fC`icG1c|2;`EoLK$ z)9|wrAV&V1Vgts~tQCw0X?X{74W"NJQ zW3BP!5c~4zzHJScwQK9L_%m%L`*q{1aW_3rObki~B~=Dwp`;@w`>xZ6;L_6oR^ecEcmup`yb}lgsmv zQByrxc)Qqm(Hwmq%fLjqcrJ5QR?z_*vb~Iy~RXUY8u-D8AqTzetwNNA8~N z$j&1>#IrkSslUqXW|l}q_TlTVKAjRI@~7(GLf4M>GM!3u_)y6ORe6BQUmrQ16%OdZKo(?AYXK$u@=)TPUi1EZaLBu zuEB(5GX2vcoHS%zMUW!DZ)&xRo@mhouk|hMgHIG>cO-Ah(0AMNlq@?cPpy==-!#qR zBov7l3G?P*KM(vU;Apo-(-Bw;sdQJkh~r)W$KRQKd!#(A8M34^MhD10Ra={AqSvjy z3>PkgA}f^@Rg1$dX=jaEB_V%_vn(W<111_s!g>CYrcwJTJ63Eeg6{_C`aMQIgKctR zHMjkr+y6gK!v6=6;CGl#?PqmiX`A@dmmvZ}-X$*q8}G(xq|voo`=$YZuQAa8f9ApK z1VQiEUQC=OO{|Nc8ZrXH208X|XCzIRO?+Nb55Jt@va9hqBpv)uY6ma-csvSlJoJOC zK;w~s?#r)K@gm*;((JsWHU-KvFTF)q>AzwPq)I+}OrSpxh!-CM1VEMfw1fpfVL7p{ z)I$rNp5kPYDsvXL>8nV{#0fa*lm`Z;0Z=c^1qveY2uk&7nhMRl`0EsvUuvwdF&o)PCVN3wmFBPegWzooF6y~b} zY>X2;LO~&rbvx59?(4^aR+s1C6hI4r&x9Q9jL9);KZEw_x%TWZXaMzK6|2XG9$IU% zkEq}t^YOaa4s`%7F31X-#SfMgNp+4R=g2G|O^W)6^2fEsmkTTaVhKCip+3qWuN8?y zaSD_k6%-@Ifhm`z02=ZWA-pi5`A=7ztHWpP2K5rCW{>!wIUOYrH``#bz>qVSH76=8 zyJ!sNBxt;dMTn}yzUTCq1!w;N7pzb?WJrQ50W+`meL{k8i0VhFsPUz(07k`l` zg1Ifl1fc-^p^MQCpK~Jk&L!*mWfNA!&MSu`sPmti>K-;I5Dk00nB3vOl4!JwjEx^X zWQsIp2Ea_>`9f@%zGl4i3FAO9=e$2^b_>_I*dqiLJ=@TejStM?^yX$9dW`#ha)PEF zPr0zUJX!j-juYK*olG_9axQniXhF|E}oSTG_S)FZ3sN4T@q zy{l;!{UGc};YVaT97tx3s7P$WsW2^*I+Hy;vqndG!9S?tZtDIRif1=bBsqtW-n7$O zWy}Z%jKSkgLX#1p>|#4l-!$c+kA`++Ixv(Rm`;Ilb3q3tD|QjaPQ8)BJ=8R*15?nL zJR{yuqOG&!JrSZ${#NY#b!k)yDajQ$A}fUQhe7ueN6h2Pj3wY5eo|7$PaJD zM69(ee1qlSyLn)Ln6)o53Lj)elqG}gb^c}qd(q&$8B5N%nSvEjUIoEXO^obv=A7QGZzNzjO*H=*b2!86Wnqdy~8ePkq@1D1)Q^O)JG;fUCV z`rgD}dJ{7BUyBbgoTL91w^q-CfBpDr?0R38`L%p9&Q#%r*@=9p-Ioqy+WscLq?jq5 zfyYNkxr7w)-(!c85mt!FjNJ4UE6P8p8sc#Kb4L1N3!yaCo9@t3n8s}K)1!w8x77xU zo-NY3SR*Pgt#~7F;y^J&Y%z^+C9wu;hN|TC7dqSHOB&kE)Q)6Ad(l&+tA@$@w0bhJ z6xc6EJ6nm{=|V7Vo&qcXc4i)D?X0Uk$p7~iI#ci?#fxvM z78`u%m5S@^_F;_foidufzP z&ueh-zU1yM&8~0lmOfkio-gBex`)?hCJcI8Jv*R0c|WUqSq z?RU?Rmm=3t_2C%%UW9c*D%T{T{EjryCKnsz9-*Bs0}M*xS&-odhCK5eS_Eqi&c6J4o|f&;uUT=p7Fedw#EUl4%Jv{w zq-cCF^otBvw~~$yj6O>>;VqU)3Ml&Atm$B(Ht8=+&x2VS5aWD&t*+04{@k^Gn~yHY zWYC%@ld;g_qz=k*;Iv&xs5M85cEZCU&n2Baf>R6*bN>V|!)eF&l#C93eAMLD=ZF7= zOISFfB5P;F!ngWD3jfMJE_53F&dFc{h2TwSbT*(h6!c}_5_UFeB_*DiyCrtQ7Byr@ z-aCWVt?J}YP7-lfelbrCgZ5mdv(^W&Yf^OvpI}#NbS1Lc`r4&t#3kM!utm&#a;?GR z-1FusfX7&?a9h`%8wf-ub7UXp44xm4w04)S$}}_hPqn-#IabO^bo6$K07>?%G5Xs( zA$*lz_K>lAJ_o<;fsP-*-%~O(716KRqVq+X@=5J~Z~bba(yWL`;EN`@Mr2it&Lkgb z&I|R5!`ZSk%)xFX*FYDaAh=5qWSY@rx1Du9J$$=lh#!~NcFJM&aOv)eqg_@`i^zJCR9a%_{k_i%msw5q z*3!~#Xx3r|VaAwiG}~9M#c`=$Uk6~xe)47ymW+;0DD_lV67L#ouJBa7mF{)X^?eIvPdOMu4ksr`jUP$~{x@?ev2 zdX#ite2RMim01PEg`;qfwg^;v8nx9F!CtNCvz)V{PVgCs*;_@_Rk*oLx@f7hJ7^^1 zu66b)mb!ZMXLZ%8dj-+JCMoWS-Wji-Q-~U7Pt~UiXMej8JcNjk<6?Wk9eLBIhu&Vo^0;AH> z;Q5^a!NZhP(vDfBv&?jdnQavv#8N0E{ZEgs>|1)qYo^t5 zIV$g~`C2%g$*(z4)8hJlK2mF-MJW#3%Cs6`uAvsgRtTo8n!Et)1pZx@_9I18 zw7ER9v~DyrC*R$do9aEw5r@B)YzHOLB^-c9Eu9D!sFmI8^VljVKE89{zY_8PTSF+J b^}%0^qYmp2WD(pA|JtZ4>nPPKybJpu3@X?! literal 0 HcmV?d00001 diff --git a/system/Drivers/STM32YYxx_HAL_Driver_version.md b/system/Drivers/STM32YYxx_HAL_Driver_version.md index 9ab5eefd9f..421001a5fd 100644 --- a/system/Drivers/STM32YYxx_HAL_Driver_version.md +++ b/system/Drivers/STM32YYxx_HAL_Driver_version.md @@ -1,5 +1,6 @@ # STM32YYxx HAL Drivers version: + * STM32C0: 1.0.1 * STM32F0: 1.7.6 * STM32F1: 1.1.8 * STM32F2: 1.2.7 From aadd4cadb9ed4445e3d19291fb358725263ca37c Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:36 +0100 Subject: [PATCH 02/23] system(C0): add STM32C0xx CMSIS Drivers to v1.0.0 Included in STM32CubeC0 FW 1.0.1 Signed-off-by: Frederic Pillon --- .../Device/ST/STM32C0xx/Include/stm32c011xx.h | 6703 ++++++++++++++++ .../Device/ST/STM32C0xx/Include/stm32c031xx.h | 6864 +++++++++++++++++ .../Device/ST/STM32C0xx/Include/stm32c0xx.h | 211 + .../ST/STM32C0xx/Include/system_stm32c0xx.h | 104 + .../CMSIS/Device/ST/STM32C0xx/LICENSE.md | 201 + .../CMSIS/Device/ST/STM32C0xx/LICENSE.txt | 6 + .../Device/ST/STM32C0xx/Release_Notes.html | 45 + .../Templates/gcc/startup_stm32c011xx.s | 256 + .../Templates/gcc/startup_stm32c031xx.s | 256 + .../Source/Templates/system_stm32c0xx.c | 228 + .../ST/STM32C0xx/_htmresc/Add button.svg | 2 + .../Device/ST/STM32C0xx/_htmresc/Update.svg | 2 + .../Device/ST/STM32C0xx/_htmresc/favicon.png | Bin 0 -> 4126 bytes .../Device/ST/STM32C0xx/_htmresc/mini-st.css | 1700 ++++ .../ST/STM32C0xx/_htmresc/mini-st_2020.css | 1711 ++++ .../Device/ST/STM32C0xx/_htmresc/st_logo.png | Bin 0 -> 18616 bytes .../ST/STM32C0xx/_htmresc/st_logo_2020.png | Bin 0 -> 7520 bytes .../Device/ST/STM32YYxx_CMSIS_version.md | 1 + 18 files changed, 18290 insertions(+) create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c011xx.h create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c031xx.h create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c0xx.h create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/system_stm32c0xx.h create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/LICENSE.md create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/LICENSE.txt create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Release_Notes.html create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c011xx.s create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c031xx.s create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/system_stm32c0xx.c create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Add button.svg create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Update.svg create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/favicon.png create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st.css create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st_2020.css create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo.png create mode 100644 system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo_2020.png diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c011xx.h b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c011xx.h new file mode 100644 index 0000000000..5677848fea --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Include/stm32c011xx.h @@ -0,0 +1,6703 @@ +/** + ****************************************************************************** + * @file stm32c011xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32c011xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32c011xx + * @{ + */ + +#ifndef STM32C011xx_H +#define STM32C011xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ +#define __CM0PLUS_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 1 /*!< STM32C0xx provides an MPU */ +#define __VTOR_PRESENT 1 /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 2 /*!< STM32C0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32c011xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + +/*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M0+ Processor Exceptions Numbers ***************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32C0xxxx specific Interrupt Numbers ****************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC interrupt through the EXTI line 19 & 21 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_IRQn = 4, /*!< RCC global Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMAMUX1_IRQn = 11, /*!< DMAMUX Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt (combined with EXTI 23) */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ +#include "system_stm32c0xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED3[17];/*!< Reserved3, Address offset: 0x3C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED6[2]; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ + uint32_t RESERVED7[8]; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t BKPREG1; /*!< Backup register 1, Address offset: 0x70 */ + __IO uint32_t BKPREG2; /*!< Backup register 2, Address offset: 0x74 */ + __IO uint32_t BKPREG3; /*!< Backup register 3, Address offset: 0x78 */ + __IO uint32_t BKPREG4; /*!< Backup register 4, Address offset: 0x7C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset: 0x0C -- 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t CSR1; /*!< RCC Control and status Register 1, Address offset: 0x5C */ + __IO uint32_t CSR2; /*!< RCC Control and status Register 2, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + uint32_t RESERVED4; /*!< Reserved Address offset: 0x48 */ + uint32_t RESERVED5; /*!< Reserved Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED6; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ +} RTC_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[8]; /*!< Reserved 0x1C --0x38 */ + __IO uint32_t CFGR3; /*!< SYSCFG configuration register 3, Address offset: 0x3C */ + uint32_t RESERVED2[16]; /*!< Reserved 0x40 --0x7C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ + +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ + +#define SRAM_SIZE_MAX (0x00001500UL) /*!< maximum SRAM size (up to 6 KBytes) */ +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) + + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) +#define DMAMUX1_IdRegisters_BASE (DMAMUX1_BASE + 0x000003EC) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7550UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75A0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) + + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) +#define DMAMUX1_IdRegisters ((DMAMUX_IdRegisters_TypeDef *) DMAMUX1_IdRegisters_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL22_Pos (22U) +#define ADC_CHSELR_CHSEL22_Msk (0x1UL << ADC_CHSELR_CHSEL22_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_CHSEL22 ADC_CHSELR_CHSEL22_Msk /*!< ADC group regular sequencer channel 22, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL21_Pos (21U) +#define ADC_CHSELR_CHSEL21_Msk (0x1UL << ADC_CHSELR_CHSEL21_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_CHSEL21 ADC_CHSELR_CHSEL21_Msk /*!< ADC group regular sequencer channel 21, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL20_Pos (20U) +#define ADC_CHSELR_CHSEL20_Msk (0x1UL << ADC_CHSELR_CHSEL20_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_CHSEL20 ADC_CHSELR_CHSEL20_Msk /*!< ADC group regular sequencer channel 20, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL19_Pos (19U) +#define ADC_CHSELR_CHSEL19_Msk (0x1UL << ADC_CHSELR_CHSEL19_Pos) /*!< 0x00080000 */ +#define ADC_CHSELR_CHSEL19 ADC_CHSELR_CHSEL19_Msk /*!< ADC group regular sequencer channel 19, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32C0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32C0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/********************************* DEVICE ID ********************************/ +#define DEV_ID 0x443UL + +/******************** Bit definition for DBG_IDCODE register *************/ +#define DBG_IDCODE_DEV_ID_Pos (0U) +#define DBG_IDCODE_DEV_ID_Msk (0xFFFUL << DBG_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ +#define DBG_IDCODE_DEV_ID DBG_IDCODE_DEV_ID_Msk +#define DBG_IDCODE_REV_ID_Pos (16U) +#define DBG_IDCODE_REV_ID_Msk (0xFFFFUL << DBG_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ +#define DBG_IDCODE_REV_ID DBG_IDCODE_REV_ID_Msk + +/******************** Bit definition for DBG_CR register *****************/ +#define DBG_CR_DBG_STOP_Pos (1U) +#define DBG_CR_DBG_STOP_Msk (0x1UL << DBG_CR_DBG_STOP_Pos) /*!< 0x00000002 */ +#define DBG_CR_DBG_STOP DBG_CR_DBG_STOP_Msk +#define DBG_CR_DBG_STANDBY_Pos (2U) +#define DBG_CR_DBG_STANDBY_Msk (0x1UL << DBG_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ +#define DBG_CR_DBG_STANDBY DBG_CR_DBG_STANDBY_Msk + +/******************** Bit definition for DBG_APB_FZ1 register ***********/ +#define DBG_APB_FZ1_DBG_TIM3_STOP_Pos (1U) +#define DBG_APB_FZ1_DBG_TIM3_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_TIM3_STOP_Pos) /*!< 0x00000002 */ +#define DBG_APB_FZ1_DBG_TIM3_STOP DBG_APB_FZ1_DBG_TIM3_STOP_Msk +#define DBG_APB_FZ1_DBG_RTC_STOP_Pos (10U) +#define DBG_APB_FZ1_DBG_RTC_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBG_APB_FZ1_DBG_RTC_STOP DBG_APB_FZ1_DBG_RTC_STOP_Msk +#define DBG_APB_FZ1_DBG_WWDG_STOP_Pos (11U) +#define DBG_APB_FZ1_DBG_WWDG_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */ +#define DBG_APB_FZ1_DBG_WWDG_STOP DBG_APB_FZ1_DBG_WWDG_STOP_Msk +#define DBG_APB_FZ1_DBG_IWDG_STOP_Pos (12U) +#define DBG_APB_FZ1_DBG_IWDG_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBG_APB_FZ1_DBG_IWDG_STOP DBG_APB_FZ1_DBG_IWDG_STOP_Msk +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Pos (21U) +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Pos) /*!< 0x00200000 */ +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Msk + +/******************** Bit definition for DBG_APB_FZ2 register ************/ +#define DBG_APB_FZ2_DBG_TIM1_STOP_Pos (11U) +#define DBG_APB_FZ2_DBG_TIM1_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM1_STOP_Pos) /*!< 0x00000800 */ +#define DBG_APB_FZ2_DBG_TIM1_STOP DBG_APB_FZ2_DBG_TIM1_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM14_STOP_Pos (15U) +#define DBG_APB_FZ2_DBG_TIM14_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM14_STOP_Pos) /*!< 0x00008000 */ +#define DBG_APB_FZ2_DBG_TIM14_STOP DBG_APB_FZ2_DBG_TIM14_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM16_STOP_Pos (17U) +#define DBG_APB_FZ2_DBG_TIM16_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM16_STOP_Pos) /*!< 0x00020000 */ +#define DBG_APB_FZ2_DBG_TIM16_STOP DBG_APB_FZ2_DBG_TIM16_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM17_STOP_Pos (18U) +#define DBG_APB_FZ2_DBG_TIM17_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM17_STOP_Pos) /*!< 0x00040000 */ +#define DBG_APB_FZ2_DBG_TIM17_STOP DBG_APB_FZ2_DBG_TIM17_STOP_Msk + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/***************** Bits definition for DMAMUX_IPHW_CFGR2 register ************/ +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Pos (0U) +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Msk (0xFFUL << DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Pos) /*!< 0x000000FF */ +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Msk /*!< Number of external request sources */ + +/***************** Bits definition for DMAMUX_IPHW_CFGR1 register ************/ +#define DMAMUX_IPHW_CFGR1_NB_STREAMS_Pos (0U) +#define DMAMUX_IPHW_CFGR1_NB_STREAMS_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_STREAMS_Pos) /*!< 0x000000FF */ +#define DMAMUX_IPHW_CFGR1_NB_STREAMS DMAMUX_IPHW_CFGR1_NB_STREAMS_Msk /*!< Number of DMA streams */ + +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Pos (8U) +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Pos) /*!< 0x0000FF00 */ +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Msk /*!< Number of peripheral requests */ + +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Pos (16U) +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Pos) /*!< 0x00FF0000 */ +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Msk /*!< Number of synchronization triggers */ + +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Pos (24U) +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Pos) /*!< 0xFF000000 */ +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Msk /*!< Number of request generation blocks */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ + + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM20_Pos (20U) +#define EXTI_IMR1_IM20_Msk (0x1UL << EXTI_IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_IMR1_IM20 EXTI_IMR1_IM20_Msk /*!< Interrupt Mask on line 20 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM26_Pos (26U) +#define EXTI_IMR1_IM26_Msk (0x1UL << EXTI_IMR1_IM26_Pos) /*!< 0x04000000 */ +#define EXTI_IMR1_IM26 EXTI_IMR1_IM26_Msk /*!< Interrupt Mask on line 26 */ +#define EXTI_IMR1_IM27_Pos (27U) +#define EXTI_IMR1_IM27_Msk (0x1UL << EXTI_IMR1_IM27_Pos) /*!< 0x08000000 */ +#define EXTI_IMR1_IM27 EXTI_IMR1_IM27_Msk /*!< Interrupt Mask on line 27 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ + +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0xFEAFFFFFUL << EXTI_IMR1_IM_Pos) /*!< 0xFEAFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ + +#define EXTI_EMR1_EM16_Pos (16U) +#define EXTI_EMR1_EM16_Msk (0x1UL << EXTI_EMR1_EM16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR1_EM16 EXTI_EMR1_EM16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM26_Pos (26U) +#define EXTI_EMR1_EM26_Msk (0x1UL << EXTI_EMR1_EM26_Pos) /*!< 0x04000000 */ +#define EXTI_EMR1_EM26 EXTI_EMR1_EM26_Msk /*!< Event Mask on line 26 */ +#define EXTI_EMR1_EM27_Pos (27U) +#define EXTI_EMR1_EM27_Msk (0x1UL << EXTI_EMR1_EM27_Pos) /*!< 0x08000000 */ +#define EXTI_EMR1_EM27 EXTI_EMR1_EM27_Msk /*!< Event Mask on line 27 */ +#define EXTI_EMR1_EM28_Pos (28U) +#define EXTI_EMR1_EM28_Msk (0x1UL << EXTI_EMR1_EM28_Pos) /*!< 0x10000000 */ +#define EXTI_EMR1_EM28 EXTI_EMR1_EM28_Msk /*!< Event Mask on line 28 */ +#define EXTI_EMR1_EM29_Pos (29U) +#define EXTI_EMR1_EM29_Msk (0x1UL << EXTI_EMR1_EM29_Pos) /*!< 0x20000000 */ +#define EXTI_EMR1_EM29 EXTI_EMR1_EM29_Msk /*!< Event Mask on line 29 */ +#define EXTI_EMR1_EM30_Pos (30U) +#define EXTI_EMR1_EM30_Msk (0x1UL << EXTI_EMR1_EM30_Pos) /*!< 0x40000000 */ +#define EXTI_EMR1_EM30 EXTI_EMR1_EM30_Msk /*!< Event Mask on line 30 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ + +#define GPIO_NRST_CONFIG_SUPPORT /*!< GPIO feature available only on specific devices: Configure NRST pin */ +#define FLASH_SECURABLE_MEMORY_SUPPORT /*!< Flash feature available only on specific devices: allow to secure memory */ +#define FLASH_PCROP_SUPPORT /*!< Flash feature available only on specific devices: proprietary code read protection areas selected by option */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk +#define FLASH_ACR_DBG_SWEN_Pos (18U) +#define FLASH_ACR_DBG_SWEN_Msk (0x1UL << FLASH_ACR_DBG_SWEN_Pos) /*!< 0x00040000 */ +#define FLASH_ACR_DBG_SWEN FLASH_ACR_DBG_SWEN_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFUL << FLASH_CR_PNB_Pos) /*!< 0x000001F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_SEC_PROT_Pos (28U) +#define FLASH_CR_SEC_PROT_Msk (0x1UL << FLASH_CR_SEC_PROT_Pos) /*!< 0x10000000 */ +#define FLASH_CR_SEC_PROT FLASH_CR_SEC_PROT_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_BOR_EN_Pos (8U) +#define FLASH_OPTR_BOR_EN_Msk (0x1UL << FLASH_OPTR_BOR_EN_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_BOR_EN FLASH_OPTR_BOR_EN_Msk +#define FLASH_OPTR_BORF_LEV_Pos (9U) +#define FLASH_OPTR_BORF_LEV_Msk (0x3UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000600 */ +#define FLASH_OPTR_BORF_LEV FLASH_OPTR_BORF_LEV_Msk +#define FLASH_OPTR_BORF_LEV_0 (0x1UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BORF_LEV_1 (0x2UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BORR_LEV_Pos (11U) +#define FLASH_OPTR_BORR_LEV_Msk (0x3UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00001800 */ +#define FLASH_OPTR_BORR_LEV FLASH_OPTR_BORR_LEV_Msk +#define FLASH_OPTR_BORR_LEV_0 (0x1UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_BORR_LEV_1 (0x2UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_nRST_SHDW_Pos (15U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk +#define FLASH_OPTR_NRST_MODE_Pos (27U) +#define FLASH_OPTR_NRST_MODE_Msk (0x3UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x18000000 */ +#define FLASH_OPTR_NRST_MODE FLASH_OPTR_NRST_MODE_Msk +#define FLASH_OPTR_NRST_MODE_0 (0x1UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_NRST_MODE_1 (0x2UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_IRHEN_Pos (29U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x7FUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x7FUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x7FUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x7FUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk + + +/****************** Bits definition for FLASH_SECR register *****************/ +#define FLASH_SECR_SEC_SIZE_Pos (0U) +#define FLASH_SECR_SEC_SIZE_Msk (0x3FUL << FLASH_SECR_SEC_SIZE_Pos) /*!< 0x0000003F */ +#define FLASH_SECR_SEC_SIZE FLASH_SECR_SEC_SIZE_Msk +#define FLASH_SECR_BOOT_LOCK_Pos (16U) +#define FLASH_SECR_BOOT_LOCK_Msk (0x1UL << FLASH_SECR_BOOT_LOCK_Pos) /*!< 0x00010000 */ +#define FLASH_SECR_BOOT_LOCK FLASH_SECR_BOOT_LOCK_Msk + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ + +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x2C */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED4[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 2 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 configuration register, Address offset: 0xA4 */ + uint32_t RESERVED5[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug configuration register, Address offset: 0x04 */ + __IO uint32_t APBFZ1; /*!< Debug APB freeze register 1, Address offset: 0x08 */ + __IO uint32_t APBFZ2; /*!< Debug APB freeze register 2, Address offset: 0x0C */ +} DBG_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief Asynch Interrupt/Event Controller (EXTI) + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI Rising Trigger Selection Register 1, Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI Falling Trigger Selection Register 1, Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI Software Interrupt event Register 1, Address offset: 0x08 */ + __IO uint32_t RPR1; /*!< EXTI Rising Pending Register 1, Address offset: 0x0C */ + __IO uint32_t FPR1; /*!< EXTI Falling Pending Register 1, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved 1, 0x14 -- 0x1C */ + uint32_t RESERVED2[5]; /*!< Reserved 2, 0x20 -- 0x30 */ + uint32_t RESERVED3[11]; /*!< Reserved 3, 0x34 -- 0x5C */ + __IO uint32_t EXTICR[4]; /*!< EXTI External Interrupt Configuration Register, 0x60 -- 0x6C */ + uint32_t RESERVED4[4]; /*!< Reserved 4, 0x70 -- 0x7C */ + __IO uint32_t IMR1; /*!< EXTI Interrupt Mask Register 1, Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI Event Mask Register 1, Address offset: 0x84 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access Control register, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank PCROP area B End address register, Address offset: 0x38 */ + uint32_t RESERVED3[17];/*!< Reserved3, Address offset: 0x3C */ + __IO uint32_t SECR; /*!< FLASH security register , Address offset: 0x80 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Clear Register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x40 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t PUCRF; /*!< PWR Pull-Up Control Register of port F, Address offset: 0x48 */ + __IO uint32_t PDCRF; /*!< PWR Pull-Down Control Register of port F, Address offset: 0x4C */ + uint32_t RESERVED7[8]; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t BKPREG1; /*!< Backup register 1, Address offset: 0x70 */ + __IO uint32_t BKPREG2; /*!< Backup register 2, Address offset: 0x74 */ + __IO uint32_t BKPREG3; /*!< Backup register 3, Address offset: 0x78 */ + __IO uint32_t BKPREG4; /*!< Backup register 4, Address offset: 0x7C */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC Clock Sources Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Regulated Domain Clocks Configuration Register, Address offset: 0x08 */ + uint32_t RESERVED0[3]; /*!< Reserved, Address offset: 0x0C -- 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t IOPRSTR; /*!< RCC IO port reset register, Address offset: 0x24 */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripherals reset register, Address offset: 0x28 */ + __IO uint32_t APBRSTR1; /*!< RCC APB peripherals reset register 1, Address offset: 0x2C */ + __IO uint32_t APBRSTR2; /*!< RCC APB peripherals reset register 2, Address offset: 0x30 */ + __IO uint32_t IOPENR; /*!< RCC IO port enable register, Address offset: 0x34 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripherals clock enable register, Address offset: 0x38 */ + __IO uint32_t APBENR1; /*!< RCC APB peripherals clock enable register1, Address offset: 0x3C */ + __IO uint32_t APBENR2; /*!< RCC APB peripherals clock enable register2, Address offset: 0x40 */ + __IO uint32_t IOPSMENR; /*!< RCC IO port clocks enable in sleep mode register, Address offset: 0x44 */ + __IO uint32_t AHBSMENR; /*!< RCC AHB peripheral clocks enable in sleep mode register, Address offset: 0x48 */ + __IO uint32_t APBSMENR1; /*!< RCC APB peripheral clocks enable in sleep mode register1, Address offset: 0x4C */ + __IO uint32_t APBSMENR2; /*!< RCC APB peripheral clocks enable in sleep mode register2, Address offset: 0x50 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Independent Clocks Configuration Register, Address offset: 0x54 */ + __IO uint32_t RESERVED2; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t CSR1; /*!< RCC Control and status Register 1, Address offset: 0x5C */ + __IO uint32_t CSR2; /*!< RCC Control and status Register 2, Address offset: 0x60 */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved Address offset: 0x1C */ + uint32_t RESERVED2; /*!< Reserved Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED3; /*!< Reserved Address offset: 0x1C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + uint32_t RESERVED4; /*!< Reserved Address offset: 0x48 */ + uint32_t RESERVED5; /*!< Reserved Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC Masked Interrupt Status register, Address offset: 0x54 */ + uint32_t RESERVED6; /*!< Reserved Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC Status Clear register, Address offset: 0x5C */ +} RTC_TypeDef; + + /** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x04 --0x14 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */ + uint32_t RESERVED1[8]; /*!< Reserved 0x1C --0x38 */ + __IO uint32_t CFGR3; /*!< SYSCFG configuration register 3, Address offset: 0x3C */ + uint32_t RESERVED2[16]; /*!< Reserved 0x40 --0x7C */ + __IO uint32_t IT_LINE_SR[32]; /*!< SYSCFG configuration IT_LINE register, Address offset: 0x80 */ +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ + +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define IOPORT_BASE (0x50000000UL) /*!< IOPORT base address */ + +#define SRAM_SIZE_MAX (0x00003000UL) /*!< maximum SRAM size (up to 12 KBytes) */ +/*!< Peripheral memory map */ +#define APBPERIPH_BASE (PERIPH_BASE) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000UL) + +/*!< APB peripherals */ + +#define TIM3_BASE (APBPERIPH_BASE + 0x00000400UL) +#define TIM14_BASE (APBPERIPH_BASE + 0x00002000UL) +#define RTC_BASE (APBPERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APBPERIPH_BASE + 0x00003000UL) +#define USART2_BASE (APBPERIPH_BASE + 0x00004400UL) +#define I2C1_BASE (APBPERIPH_BASE + 0x00005400UL) +#define PWR_BASE (APBPERIPH_BASE + 0x00007000UL) +#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000UL) +#define ADC1_BASE (APBPERIPH_BASE + 0x00012400UL) +#define ADC1_COMMON_BASE (APBPERIPH_BASE + 0x00012708UL) +#define ADC_BASE (ADC1_COMMON_BASE) /* Kept for legacy purpose */ +#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00UL) +#define SPI1_BASE (APBPERIPH_BASE + 0x00013000UL) +#define USART1_BASE (APBPERIPH_BASE + 0x00013800UL) +#define TIM16_BASE (APBPERIPH_BASE + 0x00014400UL) +#define TIM17_BASE (APBPERIPH_BASE + 0x00014800UL) +#define DBG_BASE (APBPERIPH_BASE + 0x00015800UL) + + +/*!< AHB peripherals */ +#define DMA1_BASE (AHBPERIPH_BASE) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x00000800UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x00001000UL) +#define EXTI_BASE (AHBPERIPH_BASE + 0x00001800UL) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) + + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) +#define DMAMUX1_IdRegisters_BASE (DMAMUX1_BASE + 0x000003EC) + +/*!< IOPORT */ +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOF_BASE (IOPORT_BASE + 0x00001400UL) + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7550UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75A0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define ADC (ADC1_COMMON) /* Kept for legacy purpose */ + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) + + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) +#define DMAMUX1_IdRegisters ((DMAMUX_IdRegisters_TypeDef *) DMAMUX1_IdRegisters_BASE) + +#define DBG ((DBG_TypeDef *) DBG_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/* Legacy defines */ +#define ADC_ISR_EOSEQ (ADC_ISR_EOS) + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/* Legacy defines */ +#define ADC_IER_EOSEQIE (ADC_IER_EOSIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1U << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2U << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Legacy defines */ +#define ADC_CFGR1_AUTDLY (ADC_CFGR1_WAIT) + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_OVSE_Pos (0U) +#define ADC_CFGR2_OVSE_Msk (0x1UL << ADC_CFGR2_OVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_OVSE ADC_CFGR2_OVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TOVS_Pos (9U) +#define ADC_CFGR2_TOVS_Msk (0x1UL << ADC_CFGR2_TOVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TOVS ADC_CFGR2_TOVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (26U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFFUL << ADC_TR2_LT2_Pos) /*!< 0x00000FFF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x001UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x002UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x004UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x008UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x010UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x020UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x040UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x080UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ +#define ADC_TR2_LT2_8 (0x100UL << ADC_TR2_LT2_Pos) /*!< 0x00000100 */ +#define ADC_TR2_LT2_9 (0x200UL << ADC_TR2_LT2_Pos) /*!< 0x00000200 */ +#define ADC_TR2_LT2_10 (0x400UL << ADC_TR2_LT2_Pos) /*!< 0x00000400 */ +#define ADC_TR2_LT2_11 (0x800UL << ADC_TR2_LT2_Pos) /*!< 0x00000800 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFFUL << ADC_TR2_HT2_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x001UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x002UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x004UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x008UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x010UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x020UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x040UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x080UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ +#define ADC_TR2_HT2_8 (0x100UL << ADC_TR2_HT2_Pos) /*!< 0x01000000 */ +#define ADC_TR2_HT2_9 (0x200UL << ADC_TR2_HT2_Pos) /*!< 0x02000000 */ +#define ADC_TR2_HT2_10 (0x400UL << ADC_TR2_HT2_Pos) /*!< 0x04000000 */ +#define ADC_TR2_HT2_11 (0x800UL << ADC_TR2_HT2_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL22_Pos (22U) +#define ADC_CHSELR_CHSEL22_Msk (0x1UL << ADC_CHSELR_CHSEL22_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_CHSEL22 ADC_CHSELR_CHSEL22_Msk /*!< ADC group regular sequencer channel 22, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL21_Pos (21U) +#define ADC_CHSELR_CHSEL21_Msk (0x1UL << ADC_CHSELR_CHSEL21_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_CHSEL21 ADC_CHSELR_CHSEL21_Msk /*!< ADC group regular sequencer channel 21, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL20_Pos (20U) +#define ADC_CHSELR_CHSEL20_Msk (0x1UL << ADC_CHSELR_CHSEL20_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_CHSEL20 ADC_CHSELR_CHSEL20_Msk /*!< ADC group regular sequencer channel 20, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL19_Pos (19U) +#define ADC_CHSELR_CHSEL19_Msk (0x1UL << ADC_CHSELR_CHSEL19_Pos) /*!< 0x00080000 */ +#define ADC_CHSELR_CHSEL19 ADC_CHSELR_CHSEL19_Msk /*!< ADC group regular sequencer channel 19, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFFUL << ADC_TR3_LT3_Pos) /*!< 0x00000FFF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x001UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x002UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x004UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x008UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x010UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x020UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x040UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x080UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ +#define ADC_TR3_LT3_8 (0x100UL << ADC_TR3_LT3_Pos) /*!< 0x00000100 */ +#define ADC_TR3_LT3_9 (0x200UL << ADC_TR3_LT3_Pos) /*!< 0x00000200 */ +#define ADC_TR3_LT3_10 (0x400UL << ADC_TR3_LT3_Pos) /*!< 0x00000400 */ +#define ADC_TR3_LT3_11 (0x800UL << ADC_TR3_LT3_Pos) /*!< 0x00000800 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFFUL << ADC_TR3_HT3_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x001UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x002UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x004UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x008UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x010UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x020UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x040UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x080UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ +#define ADC_TR3_HT3_8 (0x100UL << ADC_TR3_HT3_Pos) /*!< 0x01000000 */ +#define ADC_TR3_HT3_9 (0x200UL << ADC_TR3_HT3_Pos) /*!< 0x02000000 */ +#define ADC_TR3_HT3_10 (0x400UL << ADC_TR3_HT3_Pos) /*!< 0x04000000 */ +#define ADC_TR3_HT3_11 (0x800UL << ADC_TR3_HT3_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ + +/* Legacy */ +#define ADC_CCR_LFMEN_Pos (25U) +#define ADC_CCR_LFMEN_Msk (0x1UL << ADC_CCR_LFMEN_Pos) /*!< 0x02000000 */ +#define ADC_CCR_LFMEN ADC_CCR_LFMEN_Msk /*!< Legacy feature, useless on STM32C0 (ADC common clock low frequency mode is automatically managed by ADC peripheral on STM32C0) */ + + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 32-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1UL << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2UL << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/********************************* DEVICE ID ********************************/ +#define DEV_ID 0x453UL + +/******************** Bit definition for DBG_IDCODE register *************/ +#define DBG_IDCODE_DEV_ID_Pos (0U) +#define DBG_IDCODE_DEV_ID_Msk (0xFFFUL << DBG_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ +#define DBG_IDCODE_DEV_ID DBG_IDCODE_DEV_ID_Msk +#define DBG_IDCODE_REV_ID_Pos (16U) +#define DBG_IDCODE_REV_ID_Msk (0xFFFFUL << DBG_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ +#define DBG_IDCODE_REV_ID DBG_IDCODE_REV_ID_Msk + +/******************** Bit definition for DBG_CR register *****************/ +#define DBG_CR_DBG_STOP_Pos (1U) +#define DBG_CR_DBG_STOP_Msk (0x1UL << DBG_CR_DBG_STOP_Pos) /*!< 0x00000002 */ +#define DBG_CR_DBG_STOP DBG_CR_DBG_STOP_Msk +#define DBG_CR_DBG_STANDBY_Pos (2U) +#define DBG_CR_DBG_STANDBY_Msk (0x1UL << DBG_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ +#define DBG_CR_DBG_STANDBY DBG_CR_DBG_STANDBY_Msk + +/******************** Bit definition for DBG_APB_FZ1 register ***********/ +#define DBG_APB_FZ1_DBG_TIM3_STOP_Pos (1U) +#define DBG_APB_FZ1_DBG_TIM3_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_TIM3_STOP_Pos) /*!< 0x00000002 */ +#define DBG_APB_FZ1_DBG_TIM3_STOP DBG_APB_FZ1_DBG_TIM3_STOP_Msk +#define DBG_APB_FZ1_DBG_RTC_STOP_Pos (10U) +#define DBG_APB_FZ1_DBG_RTC_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBG_APB_FZ1_DBG_RTC_STOP DBG_APB_FZ1_DBG_RTC_STOP_Msk +#define DBG_APB_FZ1_DBG_WWDG_STOP_Pos (11U) +#define DBG_APB_FZ1_DBG_WWDG_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */ +#define DBG_APB_FZ1_DBG_WWDG_STOP DBG_APB_FZ1_DBG_WWDG_STOP_Msk +#define DBG_APB_FZ1_DBG_IWDG_STOP_Pos (12U) +#define DBG_APB_FZ1_DBG_IWDG_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBG_APB_FZ1_DBG_IWDG_STOP DBG_APB_FZ1_DBG_IWDG_STOP_Msk +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Pos (21U) +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Msk (0x1UL << DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Pos) /*!< 0x00200000 */ +#define DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP DBG_APB_FZ1_DBG_I2C1_SMBUS_TIMEOUT_STOP_Msk + +/******************** Bit definition for DBG_APB_FZ2 register ************/ +#define DBG_APB_FZ2_DBG_TIM1_STOP_Pos (11U) +#define DBG_APB_FZ2_DBG_TIM1_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM1_STOP_Pos) /*!< 0x00000800 */ +#define DBG_APB_FZ2_DBG_TIM1_STOP DBG_APB_FZ2_DBG_TIM1_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM14_STOP_Pos (15U) +#define DBG_APB_FZ2_DBG_TIM14_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM14_STOP_Pos) /*!< 0x00008000 */ +#define DBG_APB_FZ2_DBG_TIM14_STOP DBG_APB_FZ2_DBG_TIM14_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM16_STOP_Pos (17U) +#define DBG_APB_FZ2_DBG_TIM16_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM16_STOP_Pos) /*!< 0x00020000 */ +#define DBG_APB_FZ2_DBG_TIM16_STOP DBG_APB_FZ2_DBG_TIM16_STOP_Msk +#define DBG_APB_FZ2_DBG_TIM17_STOP_Pos (18U) +#define DBG_APB_FZ2_DBG_TIM17_STOP_Msk (0x1UL << DBG_APB_FZ2_DBG_TIM17_STOP_Pos) /*!< 0x00040000 */ +#define DBG_APB_FZ2_DBG_TIM17_STOP DBG_APB_FZ2_DBG_TIM17_STOP_Msk + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1UL << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2UL << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80UL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10UL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10UL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10UL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10UL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/***************** Bits definition for DMAMUX_IPHW_CFGR2 register ************/ +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Pos (0U) +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Msk (0xFFUL << DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Pos) /*!< 0x000000FF */ +#define DMAMUX_IPHW_CFGR2_NB_EXT_REQ DMAMUX_IPHW_CFGR2_NB_EXT_REQ_Msk /*!< Number of external request sources */ + +/***************** Bits definition for DMAMUX_IPHW_CFGR1 register ************/ +#define DMAMUX_IPHW_CFGR1_NB_STREAMS_Pos (0U) +#define DMAMUX_IPHW_CFGR1_NB_STREAMS_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_STREAMS_Pos) /*!< 0x000000FF */ +#define DMAMUX_IPHW_CFGR1_NB_STREAMS DMAMUX_IPHW_CFGR1_NB_STREAMS_Msk /*!< Number of DMA streams */ + +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Pos (8U) +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Pos) /*!< 0x0000FF00 */ +#define DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ DMAMUX_IPHW_CFGR1_NB_PERIPH_REQ_Msk /*!< Number of peripheral requests */ + +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Pos (16U) +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Pos) /*!< 0x00FF0000 */ +#define DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG DMAMUX_IPHW_CFGR1_NB_SYNC_TRIG_Msk /*!< Number of synchronization triggers */ + +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Pos (24U) +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Msk (0xFFUL << DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Pos) /*!< 0xFF000000 */ +#define DMAMUX_IPHW_CFGR1_NB_REQ_GEN DMAMUX_IPHW_CFGR1_NB_REQ_GEN_Msk /*!< Number of request generation blocks */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger configuration for input line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger configuration for input line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger configuration for input line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger configuration for input line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger configuration for input line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger configuration for input line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger configuration for input line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger configuration for input line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger configuration for input line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger configuration for input line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger configuration for input line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger configuration for input line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger configuration for input line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger configuration for input line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger configuration for input line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger configuration for input line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger configuration for input line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger configuration for input line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger configuration for input line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger configuration for input line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger configuration for input line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger configuration for input line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger configuration for input line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger configuration for input line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger configuration for input line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger configuration for input line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger configuration for input line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger configuration for input line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger configuration for input line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger configuration for input line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger configuration for input line 15 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ + +/******************* Bit definition for EXTI_RPR1 register ******************/ +#define EXTI_RPR1_RPIF0_Pos (0U) +#define EXTI_RPR1_RPIF0_Msk (0x1UL << EXTI_RPR1_RPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_RPR1_RPIF0 EXTI_RPR1_RPIF0_Msk /*!< Rising Pending Interrupt Flag on line 0 */ +#define EXTI_RPR1_RPIF1_Pos (1U) +#define EXTI_RPR1_RPIF1_Msk (0x1UL << EXTI_RPR1_RPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_RPR1_RPIF1 EXTI_RPR1_RPIF1_Msk /*!< Rising Pending Interrupt Flag on line 1 */ +#define EXTI_RPR1_RPIF2_Pos (2U) +#define EXTI_RPR1_RPIF2_Msk (0x1UL << EXTI_RPR1_RPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_RPR1_RPIF2 EXTI_RPR1_RPIF2_Msk /*!< Rising Pending Interrupt Flag on line 2 */ +#define EXTI_RPR1_RPIF3_Pos (3U) +#define EXTI_RPR1_RPIF3_Msk (0x1UL << EXTI_RPR1_RPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_RPR1_RPIF3 EXTI_RPR1_RPIF3_Msk /*!< Rising Pending Interrupt Flag on line 3 */ +#define EXTI_RPR1_RPIF4_Pos (4U) +#define EXTI_RPR1_RPIF4_Msk (0x1UL << EXTI_RPR1_RPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_RPR1_RPIF4 EXTI_RPR1_RPIF4_Msk /*!< Rising Pending Interrupt Flag on line 4 */ +#define EXTI_RPR1_RPIF5_Pos (5U) +#define EXTI_RPR1_RPIF5_Msk (0x1UL << EXTI_RPR1_RPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_RPR1_RPIF5 EXTI_RPR1_RPIF5_Msk /*!< Rising Pending Interrupt Flag on line 5 */ +#define EXTI_RPR1_RPIF6_Pos (6U) +#define EXTI_RPR1_RPIF6_Msk (0x1UL << EXTI_RPR1_RPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_RPR1_RPIF6 EXTI_RPR1_RPIF6_Msk /*!< Rising Pending Interrupt Flag on line 6 */ +#define EXTI_RPR1_RPIF7_Pos (7U) +#define EXTI_RPR1_RPIF7_Msk (0x1UL << EXTI_RPR1_RPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_RPR1_RPIF7 EXTI_RPR1_RPIF7_Msk /*!< Rising Pending Interrupt Flag on line 7 */ +#define EXTI_RPR1_RPIF8_Pos (8U) +#define EXTI_RPR1_RPIF8_Msk (0x1UL << EXTI_RPR1_RPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_RPR1_RPIF8 EXTI_RPR1_RPIF8_Msk /*!< Rising Pending Interrupt Flag on line 8 */ +#define EXTI_RPR1_RPIF9_Pos (9U) +#define EXTI_RPR1_RPIF9_Msk (0x1UL << EXTI_RPR1_RPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_RPR1_RPIF9 EXTI_RPR1_RPIF9_Msk /*!< Rising Pending Interrupt Flag on line 9 */ +#define EXTI_RPR1_RPIF10_Pos (10U) +#define EXTI_RPR1_RPIF10_Msk (0x1UL << EXTI_RPR1_RPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_RPR1_RPIF10 EXTI_RPR1_RPIF10_Msk /*!< Rising Pending Interrupt Flag on line 10 */ +#define EXTI_RPR1_RPIF11_Pos (11U) +#define EXTI_RPR1_RPIF11_Msk (0x1UL << EXTI_RPR1_RPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_RPR1_RPIF11 EXTI_RPR1_RPIF11_Msk /*!< Rising Pending Interrupt Flag on line 11 */ +#define EXTI_RPR1_RPIF12_Pos (12U) +#define EXTI_RPR1_RPIF12_Msk (0x1UL << EXTI_RPR1_RPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_RPR1_RPIF12 EXTI_RPR1_RPIF12_Msk /*!< Rising Pending Interrupt Flag on line 12 */ +#define EXTI_RPR1_RPIF13_Pos (13U) +#define EXTI_RPR1_RPIF13_Msk (0x1UL << EXTI_RPR1_RPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_RPR1_RPIF13 EXTI_RPR1_RPIF13_Msk /*!< Rising Pending Interrupt Flag on line 13 */ +#define EXTI_RPR1_RPIF14_Pos (14U) +#define EXTI_RPR1_RPIF14_Msk (0x1UL << EXTI_RPR1_RPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_RPR1_RPIF14 EXTI_RPR1_RPIF14_Msk /*!< Rising Pending Interrupt Flag on line 14 */ +#define EXTI_RPR1_RPIF15_Pos (15U) +#define EXTI_RPR1_RPIF15_Msk (0x1UL << EXTI_RPR1_RPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_RPR1_RPIF15 EXTI_RPR1_RPIF15_Msk /*!< Rising Pending Interrupt Flag on line 15 */ + + +/******************* Bit definition for EXTI_FPR1 register ******************/ +#define EXTI_FPR1_FPIF0_Pos (0U) +#define EXTI_FPR1_FPIF0_Msk (0x1UL << EXTI_FPR1_FPIF0_Pos) /*!< 0x00000001 */ +#define EXTI_FPR1_FPIF0 EXTI_FPR1_FPIF0_Msk /*!< Falling Pending Interrupt Flag on line 0 */ +#define EXTI_FPR1_FPIF1_Pos (1U) +#define EXTI_FPR1_FPIF1_Msk (0x1UL << EXTI_FPR1_FPIF1_Pos) /*!< 0x00000002 */ +#define EXTI_FPR1_FPIF1 EXTI_FPR1_FPIF1_Msk /*!< Falling Pending Interrupt Flag on line 1 */ +#define EXTI_FPR1_FPIF2_Pos (2U) +#define EXTI_FPR1_FPIF2_Msk (0x1UL << EXTI_FPR1_FPIF2_Pos) /*!< 0x00000004 */ +#define EXTI_FPR1_FPIF2 EXTI_FPR1_FPIF2_Msk /*!< Falling Pending Interrupt Flag on line 2 */ +#define EXTI_FPR1_FPIF3_Pos (3U) +#define EXTI_FPR1_FPIF3_Msk (0x1UL << EXTI_FPR1_FPIF3_Pos) /*!< 0x00000008 */ +#define EXTI_FPR1_FPIF3 EXTI_FPR1_FPIF3_Msk /*!< Falling Pending Interrupt Flag on line 3 */ +#define EXTI_FPR1_FPIF4_Pos (4U) +#define EXTI_FPR1_FPIF4_Msk (0x1UL << EXTI_FPR1_FPIF4_Pos) /*!< 0x00000010 */ +#define EXTI_FPR1_FPIF4 EXTI_FPR1_FPIF4_Msk /*!< Falling Pending Interrupt Flag on line 4 */ +#define EXTI_FPR1_FPIF5_Pos (5U) +#define EXTI_FPR1_FPIF5_Msk (0x1UL << EXTI_FPR1_FPIF5_Pos) /*!< 0x00000020 */ +#define EXTI_FPR1_FPIF5 EXTI_FPR1_FPIF5_Msk /*!< Falling Pending Interrupt Flag on line 5 */ +#define EXTI_FPR1_FPIF6_Pos (6U) +#define EXTI_FPR1_FPIF6_Msk (0x1UL << EXTI_FPR1_FPIF6_Pos) /*!< 0x00000040 */ +#define EXTI_FPR1_FPIF6 EXTI_FPR1_FPIF6_Msk /*!< Falling Pending Interrupt Flag on line 6 */ +#define EXTI_FPR1_FPIF7_Pos (7U) +#define EXTI_FPR1_FPIF7_Msk (0x1UL << EXTI_FPR1_FPIF7_Pos) /*!< 0x00000080 */ +#define EXTI_FPR1_FPIF7 EXTI_FPR1_FPIF7_Msk /*!< Falling Pending Interrupt Flag on line 7 */ +#define EXTI_FPR1_FPIF8_Pos (8U) +#define EXTI_FPR1_FPIF8_Msk (0x1UL << EXTI_FPR1_FPIF8_Pos) /*!< 0x00000100 */ +#define EXTI_FPR1_FPIF8 EXTI_FPR1_FPIF8_Msk /*!< Falling Pending Interrupt Flag on line 8 */ +#define EXTI_FPR1_FPIF9_Pos (9U) +#define EXTI_FPR1_FPIF9_Msk (0x1UL << EXTI_FPR1_FPIF9_Pos) /*!< 0x00000200 */ +#define EXTI_FPR1_FPIF9 EXTI_FPR1_FPIF9_Msk /*!< Falling Pending Interrupt Flag on line 9 */ +#define EXTI_FPR1_FPIF10_Pos (10U) +#define EXTI_FPR1_FPIF10_Msk (0x1UL << EXTI_FPR1_FPIF10_Pos) /*!< 0x00000400 */ +#define EXTI_FPR1_FPIF10 EXTI_FPR1_FPIF10_Msk /*!< Falling Pending Interrupt Flag on line 10 */ +#define EXTI_FPR1_FPIF11_Pos (11U) +#define EXTI_FPR1_FPIF11_Msk (0x1UL << EXTI_FPR1_FPIF11_Pos) /*!< 0x00000800 */ +#define EXTI_FPR1_FPIF11 EXTI_FPR1_FPIF11_Msk /*!< Falling Pending Interrupt Flag on line 11 */ +#define EXTI_FPR1_FPIF12_Pos (12U) +#define EXTI_FPR1_FPIF12_Msk (0x1UL << EXTI_FPR1_FPIF12_Pos) /*!< 0x00001000 */ +#define EXTI_FPR1_FPIF12 EXTI_FPR1_FPIF12_Msk /*!< Falling Pending Interrupt Flag on line 12 */ +#define EXTI_FPR1_FPIF13_Pos (13U) +#define EXTI_FPR1_FPIF13_Msk (0x1UL << EXTI_FPR1_FPIF13_Pos) /*!< 0x00002000 */ +#define EXTI_FPR1_FPIF13 EXTI_FPR1_FPIF13_Msk /*!< Falling Pending Interrupt Flag on line 13 */ +#define EXTI_FPR1_FPIF14_Pos (14U) +#define EXTI_FPR1_FPIF14_Msk (0x1UL << EXTI_FPR1_FPIF14_Pos) /*!< 0x00004000 */ +#define EXTI_FPR1_FPIF14 EXTI_FPR1_FPIF14_Msk /*!< Falling Pending Interrupt Flag on line 14 */ +#define EXTI_FPR1_FPIF15_Pos (15U) +#define EXTI_FPR1_FPIF15_Msk (0x1UL << EXTI_FPR1_FPIF15_Pos) /*!< 0x00008000 */ +#define EXTI_FPR1_FPIF15 EXTI_FPR1_FPIF15_Msk /*!< Falling Pending Interrupt Flag on line 15 */ + +/***************** Bit definition for EXTI_EXTICR1 register **************/ +#define EXTI_EXTICR1_EXTI0_Pos (0U) +#define EXTI_EXTICR1_EXTI0_Msk (0x7UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR1_EXTI0 EXTI_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ +#define EXTI_EXTICR1_EXTI0_0 (0x1UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR1_EXTI0_1 (0x2UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR1_EXTI0_2 (0x4UL << EXTI_EXTICR1_EXTI0_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR1_EXTI1_Pos (8U) +#define EXTI_EXTICR1_EXTI1_Msk (0x7UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR1_EXTI1 EXTI_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ +#define EXTI_EXTICR1_EXTI1_0 (0x1UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR1_EXTI1_1 (0x2UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR1_EXTI1_2 (0x4UL << EXTI_EXTICR1_EXTI1_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR1_EXTI2_Pos (16U) +#define EXTI_EXTICR1_EXTI2_Msk (0x7UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR1_EXTI2 EXTI_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ +#define EXTI_EXTICR1_EXTI2_0 (0x1UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR1_EXTI2_1 (0x2UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR1_EXTI2_2 (0x4UL << EXTI_EXTICR1_EXTI2_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR1_EXTI3_Pos (24U) +#define EXTI_EXTICR1_EXTI3_Msk (0x7UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR1_EXTI3 EXTI_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ +#define EXTI_EXTICR1_EXTI3_0 (0x1UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR1_EXTI3_1 (0x2UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR1_EXTI3_2 (0x4UL << EXTI_EXTICR1_EXTI3_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR2 register **************/ +#define EXTI_EXTICR2_EXTI4_Pos (0U) +#define EXTI_EXTICR2_EXTI4_Msk (0x7UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR2_EXTI4 EXTI_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ +#define EXTI_EXTICR2_EXTI4_0 (0x1UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR2_EXTI4_1 (0x2UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR2_EXTI4_2 (0x4UL << EXTI_EXTICR2_EXTI4_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR2_EXTI5_Pos (8U) +#define EXTI_EXTICR2_EXTI5_Msk (0x7UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR2_EXTI5 EXTI_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ +#define EXTI_EXTICR2_EXTI5_0 (0x1UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR2_EXTI5_1 (0x2UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR2_EXTI5_2 (0x4UL << EXTI_EXTICR2_EXTI5_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR2_EXTI6_Pos (16U) +#define EXTI_EXTICR2_EXTI6_Msk (0x7UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR2_EXTI6 EXTI_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ +#define EXTI_EXTICR2_EXTI6_0 (0x1UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR2_EXTI6_1 (0x2UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR2_EXTI6_2 (0x4UL << EXTI_EXTICR2_EXTI6_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR2_EXTI7_Pos (24U) +#define EXTI_EXTICR2_EXTI7_Msk (0x7UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR2_EXTI7 EXTI_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ +#define EXTI_EXTICR2_EXTI7_0 (0x1UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR2_EXTI7_1 (0x2UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR2_EXTI7_2 (0x4UL << EXTI_EXTICR2_EXTI7_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR3 register **************/ +#define EXTI_EXTICR3_EXTI8_Pos (0U) +#define EXTI_EXTICR3_EXTI8_Msk (0x7UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR3_EXTI8 EXTI_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ +#define EXTI_EXTICR3_EXTI8_0 (0x1UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR3_EXTI8_1 (0x2UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR3_EXTI8_2 (0x4UL << EXTI_EXTICR3_EXTI8_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR3_EXTI9_Pos (8U) +#define EXTI_EXTICR3_EXTI9_Msk (0x7UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR3_EXTI9 EXTI_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ +#define EXTI_EXTICR3_EXTI9_0 (0x1UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR3_EXTI9_1 (0x2UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR3_EXTI9_2 (0x4UL << EXTI_EXTICR3_EXTI9_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR3_EXTI10_Pos (16U) +#define EXTI_EXTICR3_EXTI10_Msk (0x7UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR3_EXTI10 EXTI_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ +#define EXTI_EXTICR3_EXTI10_0 (0x1UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR3_EXTI10_1 (0x2UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR3_EXTI10_2 (0x4UL << EXTI_EXTICR3_EXTI10_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR3_EXTI11_Pos (24U) +#define EXTI_EXTICR3_EXTI11_Msk (0x7UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR3_EXTI11 EXTI_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ +#define EXTI_EXTICR3_EXTI11_0 (0x1UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR3_EXTI11_1 (0x2UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR3_EXTI11_2 (0x4UL << EXTI_EXTICR3_EXTI11_Pos) /*!< 0x04000000 */ + +/***************** Bit definition for EXTI_EXTICR4 register **************/ +#define EXTI_EXTICR4_EXTI12_Pos (0U) +#define EXTI_EXTICR4_EXTI12_Msk (0x7UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define EXTI_EXTICR4_EXTI12 EXTI_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ +#define EXTI_EXTICR4_EXTI12_0 (0x1UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000001 */ +#define EXTI_EXTICR4_EXTI12_1 (0x2UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000002 */ +#define EXTI_EXTICR4_EXTI12_2 (0x4UL << EXTI_EXTICR4_EXTI12_Pos) /*!< 0x00000004 */ +#define EXTI_EXTICR4_EXTI13_Pos (8U) +#define EXTI_EXTICR4_EXTI13_Msk (0x7UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000700 */ +#define EXTI_EXTICR4_EXTI13 EXTI_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ +#define EXTI_EXTICR4_EXTI13_0 (0x1UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000100 */ +#define EXTI_EXTICR4_EXTI13_1 (0x2UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000200 */ +#define EXTI_EXTICR4_EXTI13_2 (0x4UL << EXTI_EXTICR4_EXTI13_Pos) /*!< 0x00000400 */ +#define EXTI_EXTICR4_EXTI14_Pos (16U) +#define EXTI_EXTICR4_EXTI14_Msk (0x7UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00070000 */ +#define EXTI_EXTICR4_EXTI14 EXTI_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ +#define EXTI_EXTICR4_EXTI14_0 (0x1UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00010000 */ +#define EXTI_EXTICR4_EXTI14_1 (0x2UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00020000 */ +#define EXTI_EXTICR4_EXTI14_2 (0x4UL << EXTI_EXTICR4_EXTI14_Pos) /*!< 0x00040000 */ +#define EXTI_EXTICR4_EXTI15_Pos (24U) +#define EXTI_EXTICR4_EXTI15_Msk (0x7UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x07000000 */ +#define EXTI_EXTICR4_EXTI15 EXTI_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ +#define EXTI_EXTICR4_EXTI15_0 (0x1UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x01000000 */ +#define EXTI_EXTICR4_EXTI15_1 (0x2UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x02000000 */ +#define EXTI_EXTICR4_EXTI15_2 (0x4UL << EXTI_EXTICR4_EXTI15_Pos) /*!< 0x04000000 */ + +/******************* Bit definition for EXTI_IMR1 register ******************/ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM20_Pos (20U) +#define EXTI_IMR1_IM20_Msk (0x1UL << EXTI_IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_IMR1_IM20 EXTI_IMR1_IM20_Msk /*!< Interrupt Mask on line 20 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM26_Pos (26U) +#define EXTI_IMR1_IM26_Msk (0x1UL << EXTI_IMR1_IM26_Pos) /*!< 0x04000000 */ +#define EXTI_IMR1_IM26 EXTI_IMR1_IM26_Msk /*!< Interrupt Mask on line 26 */ +#define EXTI_IMR1_IM27_Pos (27U) +#define EXTI_IMR1_IM27_Msk (0x1UL << EXTI_IMR1_IM27_Pos) /*!< 0x08000000 */ +#define EXTI_IMR1_IM27 EXTI_IMR1_IM27_Msk /*!< Interrupt Mask on line 27 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< Interrupt Mask on line 31 */ + +#define EXTI_IMR1_IM_Pos (0U) +#define EXTI_IMR1_IM_Msk (0xFEAFFFFFUL << EXTI_IMR1_IM_Pos) /*!< 0xFEAFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_IM_Msk /*!< Interrupt Mask All */ + +/******************* Bit definition for EXTI_EMR1 register ******************/ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< Event Mask on line 15 */ + +#define EXTI_EMR1_EM16_Pos (16U) +#define EXTI_EMR1_EM16_Msk (0x1UL << EXTI_EMR1_EM16_Pos) /*!< 0x00010000 */ +#define EXTI_EMR1_EM16 EXTI_EMR1_EM16_Msk /*!< Event Mask on line 16 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< Event Mask on line 19 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< Event Mask on line 21 */ +#define EXTI_EMR1_EM23_Pos (23U) +#define EXTI_EMR1_EM23_Msk (0x1UL << EXTI_EMR1_EM23_Pos) /*!< 0x00800000 */ +#define EXTI_EMR1_EM23 EXTI_EMR1_EM23_Msk /*!< Event Mask on line 23 */ +#define EXTI_EMR1_EM25_Pos (25U) +#define EXTI_EMR1_EM25_Msk (0x1UL << EXTI_EMR1_EM25_Pos) /*!< 0x02000000 */ +#define EXTI_EMR1_EM25 EXTI_EMR1_EM25_Msk /*!< Event Mask on line 25 */ +#define EXTI_EMR1_EM26_Pos (26U) +#define EXTI_EMR1_EM26_Msk (0x1UL << EXTI_EMR1_EM26_Pos) /*!< 0x04000000 */ +#define EXTI_EMR1_EM26 EXTI_EMR1_EM26_Msk /*!< Event Mask on line 26 */ +#define EXTI_EMR1_EM27_Pos (27U) +#define EXTI_EMR1_EM27_Msk (0x1UL << EXTI_EMR1_EM27_Pos) /*!< 0x08000000 */ +#define EXTI_EMR1_EM27 EXTI_EMR1_EM27_Msk /*!< Event Mask on line 27 */ +#define EXTI_EMR1_EM28_Pos (28U) +#define EXTI_EMR1_EM28_Msk (0x1UL << EXTI_EMR1_EM28_Pos) /*!< 0x10000000 */ +#define EXTI_EMR1_EM28 EXTI_EMR1_EM28_Msk /*!< Event Mask on line 28 */ +#define EXTI_EMR1_EM29_Pos (29U) +#define EXTI_EMR1_EM29_Msk (0x1UL << EXTI_EMR1_EM29_Pos) /*!< 0x20000000 */ +#define EXTI_EMR1_EM29 EXTI_EMR1_EM29_Msk /*!< Event Mask on line 29 */ +#define EXTI_EMR1_EM30_Pos (30U) +#define EXTI_EMR1_EM30_Msk (0x1UL << EXTI_EMR1_EM30_Pos) /*!< 0x40000000 */ +#define EXTI_EMR1_EM30 EXTI_EMR1_EM30_Msk /*!< Event Mask on line 30 */ +#define EXTI_EMR1_EM31_Pos (31U) +#define EXTI_EMR1_EM31_Msk (0x1UL << EXTI_EMR1_EM31_Pos) /*!< 0x80000000 */ +#define EXTI_EMR1_EM31 EXTI_EMR1_EM31_Msk /*!< Event Mask on line 31 */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ + +#define GPIO_NRST_CONFIG_SUPPORT /*!< GPIO feature available only on specific devices: Configure NRST pin */ +#define FLASH_SECURABLE_MEMORY_SUPPORT /*!< Flash feature available only on specific devices: allow to secure memory */ +#define FLASH_PCROP_SUPPORT /*!< Flash feature available only on specific devices: proprietary code read protection areas selected by option */ + +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk +#define FLASH_ACR_PROGEMPTY_Pos (16U) +#define FLASH_ACR_PROGEMPTY_Msk (0x1UL << FLASH_ACR_PROGEMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_PROGEMPTY FLASH_ACR_PROGEMPTY_Msk +#define FLASH_ACR_DBG_SWEN_Pos (18U) +#define FLASH_ACR_DBG_SWEN_Msk (0x1UL << FLASH_ACR_DBG_SWEN_Pos) /*!< 0x00040000 */ +#define FLASH_ACR_DBG_SWEN FLASH_ACR_DBG_SWEN_Msk + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk +#define FLASH_SR_BSY1_Pos (16U) +#define FLASH_SR_BSY1_Msk (0x1UL << FLASH_SR_BSY1_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY1 FLASH_SR_BSY1_Msk +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk +#define FLASH_CR_MER1_Pos (2U) +#define FLASH_CR_MER1_Msk (0x1UL << FLASH_CR_MER1_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER1 FLASH_CR_MER1_Msk +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFUL << FLASH_CR_PNB_Pos) /*!< 0x000001F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk +#define FLASH_CR_SEC_PROT_Pos (28U) +#define FLASH_CR_SEC_PROT_Msk (0x1UL << FLASH_CR_SEC_PROT_Pos) /*!< 0x10000000 */ +#define FLASH_CR_SEC_PROT FLASH_CR_SEC_PROT_Msk +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x3FFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x00003FFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk +#define FLASH_OPTR_BOR_EN_Pos (8U) +#define FLASH_OPTR_BOR_EN_Msk (0x1UL << FLASH_OPTR_BOR_EN_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_BOR_EN FLASH_OPTR_BOR_EN_Msk +#define FLASH_OPTR_BORF_LEV_Pos (9U) +#define FLASH_OPTR_BORF_LEV_Msk (0x3UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000600 */ +#define FLASH_OPTR_BORF_LEV FLASH_OPTR_BORF_LEV_Msk +#define FLASH_OPTR_BORF_LEV_0 (0x1UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BORF_LEV_1 (0x2UL << FLASH_OPTR_BORF_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BORR_LEV_Pos (11U) +#define FLASH_OPTR_BORR_LEV_Msk (0x3UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00001800 */ +#define FLASH_OPTR_BORR_LEV FLASH_OPTR_BORR_LEV_Msk +#define FLASH_OPTR_BORR_LEV_0 (0x1UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_BORR_LEV_1 (0x2UL << FLASH_OPTR_BORR_LEV_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP_Pos (13U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk +#define FLASH_OPTR_nRST_STDBY_Pos (14U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk +#define FLASH_OPTR_nRST_SHDW_Pos (15U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk +#define FLASH_OPTR_RAM_PARITY_CHECK_Pos (22U) +#define FLASH_OPTR_RAM_PARITY_CHECK_Msk (0x1UL << FLASH_OPTR_RAM_PARITY_CHECK_Pos) /*!< 0x00400000 */ +#define FLASH_OPTR_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK_Msk +#define FLASH_OPTR_nBOOT_SEL_Pos (24U) +#define FLASH_OPTR_nBOOT_SEL_Msk (0x1UL << FLASH_OPTR_nBOOT_SEL_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_nBOOT_SEL FLASH_OPTR_nBOOT_SEL_Msk +#define FLASH_OPTR_nBOOT1_Pos (25U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk +#define FLASH_OPTR_nBOOT0_Pos (26U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk +#define FLASH_OPTR_NRST_MODE_Pos (27U) +#define FLASH_OPTR_NRST_MODE_Msk (0x3UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x18000000 */ +#define FLASH_OPTR_NRST_MODE FLASH_OPTR_NRST_MODE_Msk +#define FLASH_OPTR_NRST_MODE_0 (0x1UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_NRST_MODE_1 (0x2UL << FLASH_OPTR_NRST_MODE_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_IRHEN_Pos (29U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x7FUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x7FUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x1FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000001F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x1FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x001F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x7FUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x7FUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x0000007F */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk + + +/****************** Bits definition for FLASH_SECR register *****************/ +#define FLASH_SECR_SEC_SIZE_Pos (0U) +#define FLASH_SECR_SEC_SIZE_Msk (0x3FUL << FLASH_SECR_SEC_SIZE_Pos) /*!< 0x0000003F */ +#define FLASH_SECR_SEC_SIZE FLASH_SECR_SEC_SIZE_Msk +#define FLASH_SECR_BOOT_LOCK_Pos (16U) +#define FLASH_SECR_BOOT_LOCK_Msk (0x1UL << FLASH_SECR_BOOT_LOCK_Pos) /*!< 0x00010000 */ +#define FLASH_SECR_BOOT_LOCK FLASH_SECR_BOOT_LOCK_Msk + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2UL << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2UL << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1UL << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2UL << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1UL << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2UL << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1UL << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2UL << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1UL << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2UL << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1UL << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2UL << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1UL << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2UL << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1UL << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2UL << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1UL << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2UL << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1UL << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2UL << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1UL << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2UL << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8UL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8UL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8UL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8UL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8UL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8UL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8UL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8UL << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8UL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8UL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8UL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8UL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8UL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8UL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8UL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8UL << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0U) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*! */ +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< timestamp enable > */ +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge > */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk +#define RTC_CALR_CALM_0 (0x001UL << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002UL << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004UL << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008UL << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010UL << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020UL << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040UL << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080UL << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100UL << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< AM-PM notation > */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk +#define RTC_TSTR_HT_0 (0x1UL << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2UL << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk +#define RTC_TSTR_HU_0 (0x1UL << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2UL << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4UL << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8UL << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk +#define RTC_TSTR_MNT_0 (0x1UL << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2UL << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4UL << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk +#define RTC_TSTR_MNU_0 (0x1UL << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2UL << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4UL << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8UL << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk +#define RTC_TSTR_ST_0 (0x1UL << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2UL << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4UL << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk +#define RTC_TSTR_SU_0 (0x1UL << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2UL << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4UL << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8UL << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Week day units > */ +#define RTC_TSDR_WDU_0 (0x1UL << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2UL << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4UL << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk +#define RTC_TSDR_MU_0 (0x1UL << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2UL << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4UL << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8UL << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk +#define RTC_TSDR_DT_0 (0x1UL << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2UL << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk +#define RTC_TSDR_DU_0 (0x1UL << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2UL << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4UL << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8UL << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Sub second value > */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk +#define RTC_ALRMAR_DT_0 (0x1UL << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2UL << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk +#define RTC_ALRMAR_DU_0 (0x1UL << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2UL << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4UL << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8UL << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk +#define RTC_ALRMAR_HT_0 (0x1UL << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2UL << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk +#define RTC_ALRMAR_HU_0 (0x1UL << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2UL << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4UL << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8UL << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk +#define RTC_ALRMAR_MNT_0 (0x1UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk +#define RTC_ALRMAR_MNU_0 (0x1UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8UL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk +#define RTC_ALRMAR_ST_0 (0x1UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk +#define RTC_ALRMAR_SU_0 (0x1UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8UL << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk +#define RTC_ALRMASSR_MASKSS_0 (0x1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_SR register *******************/ +#define RTC_SR_TSOVF_Pos (4U) +#define RTC_SR_TSOVF_Msk (0x1UL << RTC_SR_TSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SR_TSOVF RTC_SR_TSOVF_Msk /*!< Timestamp overflow flag > */ +#define RTC_SR_TSF_Pos (3U) +#define RTC_SR_TSF_Msk (0x1UL << RTC_SR_TSF_Pos) /*!< 0x00000008 */ +#define RTC_SR_TSF RTC_SR_TSF_Msk /*!< Timestamp flag > */ +#define RTC_SR_ALRAF_Pos (0U) +#define RTC_SR_ALRAF_Msk (0x1UL << RTC_SR_ALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SR_ALRAF RTC_SR_ALRAF_Msk + +/******************** Bits definition for RTC_MISR register *****************/ +#define RTC_MISR_TSOVMF_Pos (4U) +#define RTC_MISR_TSOVMF_Msk (0x1UL << RTC_MISR_TSOVMF_Pos) /*!< 0x00000010 */ +#define RTC_MISR_TSOVMF RTC_MISR_TSOVMF_Msk /*!< Timestamp overflow masked flag > */ +#define RTC_MISR_TSMF_Pos (3U) +#define RTC_MISR_TSMF_Msk (0x1UL << RTC_MISR_TSMF_Pos) /*!< 0x00000008 */ +#define RTC_MISR_TSMF RTC_MISR_TSMF_Msk /*!< Timestamp masked flag > */ +#define RTC_MISR_ALRAMF_Pos (0U) +#define RTC_MISR_ALRAMF_Msk (0x1UL << RTC_MISR_ALRAMF_Pos) /*!< 0x00000001 */ +#define RTC_MISR_ALRAMF RTC_MISR_ALRAMF_Msk + +/******************** Bits definition for RTC_SCR register ******************/ +#define RTC_SCR_CTSOVF_Pos (4U) +#define RTC_SCR_CTSOVF_Msk (0x1UL << RTC_SCR_CTSOVF_Pos) /*!< 0x00000010 */ +#define RTC_SCR_CTSOVF RTC_SCR_CTSOVF_Msk /*!< Clear timestamp overflow flag > */ +#define RTC_SCR_CTSF_Pos (3U) +#define RTC_SCR_CTSF_Msk (0x1UL << RTC_SCR_CTSF_Pos) /*!< 0x00000008 */ +#define RTC_SCR_CTSF RTC_SCR_CTSF_Msk /*!< Clear timestamp flag > */ +#define RTC_SCR_CALRAF_Pos (0U) +#define RTC_SCR_CALRAF_Msk (0x1UL << RTC_SCR_CALRAF_Pos) /*!< 0x00000001 */ +#define RTC_SCR_CALRAF RTC_SCR_CALRAF_Msk + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ + +#define SPI_I2S_SUPPORT /*!< I2S support */ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*! + + + + + + Release Notes for STM32C0xx CMSIS + + + + + + +
+
+
+

Release Notes for  STM32C0xx CMSIS

+

Copyright © 2022 STMicroelectronics
+

+ +
+
+
+

Update History

+
+ +
+

Main Changes

+

First official release version of bits and registers definition aligned with STM32C0 reference manual

+
+
+
+
+
+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. +
+ + diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c011xx.s b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c011xx.s new file mode 100644 index 0000000000..6eed97f38e --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c011xx.s @@ -0,0 +1,256 @@ +/** + ****************************************************************************** + * @file startup_stm32c011xx.s + * @author MCD Application Team + * @brief STM32C011xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0+ processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ******************************************************************************* + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ******************************************************************************* + */ + + .syntax unified + .cpu cortex-m0plus + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word 0 /* reserved */ + .word RTC_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word 0 /* reserved */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMAMUX1_IRQHandler /* DMAMUX1 */ + .word ADC1_IRQHandler /* ADC1 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word 0 /* reserved */ + .word TIM3_IRQHandler /* TIM3 */ + .word 0 /* reserved */ + .word 0 /* reserved */ + .word TIM14_IRQHandler /* TIM14 */ + .word 0 /* reserved */ + .word TIM16_IRQHandler /* TIM16 */ + .word TIM17_IRQHandler /* TIM17 */ + .word I2C1_IRQHandler /* I2C1 */ + .word 0 /* reserved */ + .word SPI1_IRQHandler /* SPI1 */ + .word 0 /* reserved */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word 0 /* reserved */ + .word 0 /* reserved */ + .word 0 /* reserved */ +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMAMUX1_IRQHandler + .thumb_set DMAMUX1_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c031xx.s b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c031xx.s new file mode 100644 index 0000000000..d18f844391 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/gcc/startup_stm32c031xx.s @@ -0,0 +1,256 @@ +/** + ****************************************************************************** + * @file startup_stm32c031xx.s + * @author MCD Application Team + * @brief STM32C031xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0+ processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ******************************************************************************* + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ******************************************************************************* + */ + + .syntax unified + .cpu cortex-m0plus + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word 0 /* reserved */ + .word RTC_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word 0 /* reserved */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */ + .word DMAMUX1_IRQHandler /* DMAMUX1 */ + .word ADC1_IRQHandler /* ADC1 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word 0 /* reserved */ + .word TIM3_IRQHandler /* TIM3 */ + .word 0 /* reserved */ + .word 0 /* reserved */ + .word TIM14_IRQHandler /* TIM14 */ + .word 0 /* reserved */ + .word TIM16_IRQHandler /* TIM16 */ + .word TIM17_IRQHandler /* TIM17 */ + .word I2C1_IRQHandler /* I2C1 */ + .word 0 /* reserved */ + .word SPI1_IRQHandler /* SPI1 */ + .word 0 /* reserved */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word 0 /* reserved */ + .word 0 /* reserved */ + .word 0 /* reserved */ +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMAMUX1_IRQHandler + .thumb_set DMAMUX1_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/system_stm32c0xx.c b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/system_stm32c0xx.c new file mode 100644 index 0000000000..f0e137f151 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/Source/Templates/system_stm32c0xx.c @@ -0,0 +1,228 @@ +/** + ****************************************************************************** + * @file system_stm32c0xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32c0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32c0xx_system + * @{ + */ + +/** @addtogroup STM32C0xx_System_Private_Includes + * @{ + */ + +#include "stm32c0xx.h" + +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE (48000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +//#define VECT_TAB_SRAM +#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 48000000UL; + + const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL}; + const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL}; + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ +void SystemInit(void) +{ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE + * + * - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE + * + * (**) HSI_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_0: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + + case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */ + SystemCoreClock = LSI_VALUE; + break; + + case RCC_CFGR_SWS_2: /* LSE used as system clock */ + SystemCoreClock = LSE_VALUE; + break; + + case 0x00000000U: /* HSI used as system clock */ + default: /* HSI used as system clock */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos)); + SystemCoreClock = (HSI_VALUE/hsidiv); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Add button.svg b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Add button.svg new file mode 100644 index 0000000000..c211545dad --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Add button.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Update.svg b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Update.svg new file mode 100644 index 0000000000..f88381f1e6 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/Update.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/favicon.png b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/favicon.png new file mode 100644 index 0000000000000000000000000000000000000000..06713eec4974e141c6e9b4156d34e61e89f282ca GIT binary patch literal 4126 zcmV+(5aI8MP)ZIGU@QfPy~$kHP}Vz9c$a)g>fT6hB^OaK4>c|MGS0000HbW%=J|NsC0|NsC0 z|NsC0|NsC0041%NVgLXD!bwCyRCwCllie1CAP9sJ&9ooo{hxLjw5@YC+xxf~%TE}{ zNd5%935b--eKa7{Q8)vZ;eI6pGFH>rL)887WOA={e(b_&0g-g6to#Hm2B3vqWV>1u z@z7*I(bdWdx-Y=OT@|og)oZEgAbc7ep|Gf{$7j1Oa#T&r4>0xv(+}tR_4biWa z1Q-BfcsgeLIJPbT0000rV&neh&#Q1i z007~1e$oCcFS8neI|hJl{-P!B1ZZ9hpmq0)X0i`JwE&>$+E?>%_LC6RbVIkUx0b+_+BaR3cnT7Zv!AJxW zizFb)h!jyGOOZ85F;a?DAXP{m@;!0_IfqH8(HlgRxt7s3}k3K`kFu>>-2Q$QMFfPW!La{h336o>X zu_CMttHv6zR;&ZNiS=X8v3CR#fknUxHUxJ0uoBa_M6WNWeqIg~6QE69c9o#eyhGvpiOA@W-aonk<7r1(?fC{oI5N*U!4 zfg=2N-7=cNnjjOr{yriy6mMFgG#l znCF=fnQv8CDz++o6_Lscl}eQ+l^ZHARH>?_s@|##Rr6KLRFA1%Q+=*RRWnoLsR`7U zt5vFIcfW3@?wFpwUVxrVZ>QdQz32KIeJ}k~{cZZE^+ya? z2D1z#2HOnI7(B%_ac?{wFUQ;QQA1tBKtrWrm0_3Rgps+?Jfqb{jYbcQX~taRB;#$y zZN{S}1|}gUOHJxc?wV3fxuz+mJ4`!F$IZ;mqRrNsHJd##*D~ju=bP7?-?v~|cv>vB zsJ6IeNwVZxrdjT`yl#bBIa#GxRa#xMMy;K#CDyyGyQdMSxlWT#tDe?p!?5wT$+oGt z8L;Kp2HUQ-ZMJ=3XJQv;x5ci*?vuTfeY$;({XGW_huIFR9a(?@3)XSs8O^N5RyOM=TTmp(3=8^+zpz2r)C z^>JO{deZfso3oq3?Wo(Y?l$ge?uXo;%ru`Vo>?<<(8I_>;8Eq#KMS9gFl*neeosSB zfoHYnBQIkwkyowPu(zdms`p{<7e4kra-ZWq<2*OsGTvEV%s0Td$hXT+!*8Bnh2KMe zBmZRodjHV?r+_5^X9J0WL4jKW`}lf%A-|44I@@LTvf1rHjG(ze6+w@Jt%Bvjts!X0 z?2xS?_ve_-kiKB_KiJlZ$9G`c^=E@oNG)mWWaNo-3TIW8)$Hg0Ub-~8?KhvJ>$ z3*&nim@mj(aCxE5!t{lw7O5^0EIO7zOo&c6l<+|iDySBWCGrz@C5{St!X3hAA}`T4 z(TLbXTq+(;@<=L8dXnssyft|w#WSTW<++3>sgS%(4NTpeI-VAqb|7ssJvzNHgOZVu zaYCvgO_R1~>SyL=cFU|~g|hy|Zi}}s9+d~lYqOB71z9Z$wnC=pR9Yz4DhIM>Wmjgu z&56o6maCpC&F##y%G;1PobR9i?GnNg;gYtchD%p19a!eQtZF&3JaKv33gZ<8D~47E ztUS1iwkmDaPpj=$m#%)jCVEY4fnLGNg2A-`YwHVD3gv};>)hAvT~AmqS>Lr``i7kw zJ{5_It`yrBmlc25DBO7E8;5VoznR>Ww5hAaxn$2~(q`%A-YuS64wkBy=9dm`4cXeX z4c}I@?e+FW+b@^RDBHV(wnMq2zdX3SWv9u`%{xC-q*U}&`cyXV(%rRT*Z6MH?i+i& z_B8C(+grT%{XWUQ+f@NoP1R=AW&26{v-dx)iK^-Nmiuj8txj!m?Z*Ss1N{dh4z}01 z)YTo*JycSU)+_5r4#yw9{+;i4Ee$peRgIj+;v;ZGdF1K$3E%e~4LaI(jC-u%2h$&R z9cLXcYC@Xwnns&bn)_Q~Te?roKGD|d-g^8;+aC{{G(1^(O7m37Y1-+6)01cN&y1aw zoqc{T`P^XJqPBbIW6s}d4{z_f5Om?vMgNQEJG?v2T=KYd^0M3I6IZxbny)%vZR&LD zJpPl@Psh8QyPB@KTx+@RdcC!KX7}kEo;S|j^u2lU7XQ}Oo;f|;z4Ll+_r>@1-xl3| zawq-H%e&ckC+@AhPrP6BKT#_XdT7&;F71j}Joy zkC~6lh7E@6o;W@^IpRNZ{ptLtL(gQ-CY~4mqW;US7Zxvm_|@yz&e53Bp_lTPlfP|z zrTyx_>lv@x#=^!PzR7qqF<$gm`|ZJZ+;<)Cqu&ot2z=0000WV@Og>004R=004l4008;_004mL004C`008P>0026e000+nl3&F} z000F^NklQWRUVq~pvFslpiNq83Yr*1(ELa!!kppKfxQKEkPzz^I>0W)!71xam z(B64`)5a~kHf9SBOp*Wvo{xA*e4|Kv3g6TCo+fF8q^C$|g>#NlXyY$%lmkmCh$x1Z zFbJ_hiDG`37w>KPVB83d7E3>R@-M9$`|}|QFF}1qSk!nanPdVd3K38edo3y+D*=Uo zfOWCwj(F@GSjPG&B<0O;H!Zm0g>eDeK09{b@xB};mEy; z;Gp5H_Cr65qKM1uYIu6x&16!Ei=BHfJLe)1IUnFqc6d#D=ZVQmV9C73vy1=x$SK;s z=*CYZP+Ei1D5Vjl#u88v5dv#jId?iu)8mM}{mD`GcMXtAC5ap?ZoKr&iYuqTKHe$t zTR%R$ZZwxec?l+0r_LIVbe-mzH+D0*ZYsu4BE~~JA2A+AD?BAArO=g8ZfvXtU~o9c zZ(Bd-RFK5jh*DvM1v6^41HB@0K0qn7E8E&Xz1mk6hvmx?*|WB_H!dcO;5R$=<4b~s z5zr3N4zxlkMKOrDeny(PGpEM6^hGyc7lhg>MWtM!af*pn%&q_PxI(n^(-Zd{ICPAp z(WE@Zz5|EZyt{MEDy&l5$Cba^zU!9k&;Vs7lk$@o02LOwb#e2{#3%Cn2>kQF(RKUU z+tW!;FT0@d+TX^L;>@3RytlTP&ts$pqA}TwENBlg9?$-D zF9Sn4URZx8)hVBw<~NY=h3=so7{jEhG%Zc_0QBSvY~K4BS|W5MAem5XSb6m}VDN$f zy+b3n9qjIJoHM5pqYa`IPH9AIoM=!AE1Er>r|3E}#Jq-S)cTrfD&TZjAuN@+V}3mi zlhOce+q<8>Y?i93G=*Z3Web`ri!Q%p%LR*(bB?;|)B`&=J&ab0Z(UKpbzyZV5o*#& z0FLzzaI$v*-#WB)+`n>BoJ*1AwU0XSu;@w&Hu1WYXVR#!8itC%68CzMeiXhL#`9W$9J30NB-Wg!ex`hBlg9F5u@&o4>hd`TWPv z{r{JbyvQGZzbyvPS}zAifbhF49z~X|@9v|!=No>qsF|P~vf=g>7#%0yk<U?Ha8*Z4HW>#8w>z$A3 z>^uQlk;$a-6CQ(uc@RM)Cbss!xuPVl2@c1u-5tEUw}U8OfP_J+QYhfu$B<0Cj3xm7 c?*aZZ00ulYFs-m=@&Et;07*qoM6N<$f~=14i~s-t literal 0 HcmV?d00001 diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st.css b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st.css new file mode 100644 index 0000000000..3caf11c32e --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st.css @@ -0,0 +1,1700 @@ +@charset "UTF-8"; +/* + Flavor name: Default (mini-default) + Author: Angelos Chalaris (chalarangelo@gmail.com) + Maintainers: Angelos Chalaris + mini.css version: v3.0.0-alpha.3 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #111; + --secondary-fore-color: #444; + --back-color: #f8f8f8; + --secondary-back-color: #f0f0f0; + --blockquote-color: #f57c00; + --pre-color: #1565c0; + --border-color: #aaa; + --secondary-border-color: #ddd; + --heading-ratio: 1.19; + --universal-margin: 0.5rem; + --universal-padding: 0.125rem; + --universal-border-radius: 0.125rem; + --a-link-color: #0277bd; + --a-visited-color: #01579b; } + +html { + font-size: 14px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, Ubuntu, "Helvetica Neue", Helvetica, sans-serif; + line-height: 1.4; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + background: var(--back-color); } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.2; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 500; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio); ); + background: var(--mark-back-color); + font-weight: 600; + padding: 0.1em 0.5em 0.2em 0.5em; + color: var(--mark-fore-color); } + +h3 { + font-size: calc(1rem * var(--heading-ratio)); + padding-left: calc(2 * var(--universal-margin)); + /* background: var(--border-color); */ + } + +h4 { + font-size: 1rem;); + padding-left: calc(4 * var(--universal-margin)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(6 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0625rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0625rem solid var(--secondary-border-color); + border-left: 0.375rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 3rem; + font-weight: 700; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0625rem solid var(--secondary-border-color); + border-left: 0.25rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #f8f8f8; + --card-fore-color: #111; + --card-border-color: #ddd; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0625rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0625rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { +/* --card-back-color: #ffca28; */ + --card-back-color: #e5b8b7; + --card-border-color: #e8b825; } + +.card.error { + --card-back-color: #b71c1c; + --card-fore-color: #f8f8f8; + --card-border-color: #a71a1a; } + +.card > .sectione.dark { + --card-back-color: #e0e0e0; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #f0f0f0; + --form-fore-color: #111; + --form-border-color: #ddd; + --input-back-color: #f8f8f8; + --input-fore-color: #111; + --input-border-color: #ddd; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0625rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0625rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 700; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0625rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0625rem + var(--universal-padding) / 2); + left: calc(0.0625rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0625rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0625rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0625rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0625rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #f8f8f8; + --header-hover-back-color: #f0f0f0; + --header-fore-color: #444; + --header-border-color: #ddd; + --nav-back-color: #f8f8f8; + --nav-hover-back-color: #f0f0f0; + --nav-fore-color: #444; + --nav-border-color: #ddd; + --nav-link-color: #0277bd; + --footer-fore-color: #444; + --footer-back-color: #f8f8f8; + --footer-border-color: #ddd; + --footer-link-color: #0277bd; + --drawer-back-color: #f8f8f8; + --drawer-hover-back-color: #f0f0f0; + --drawer-border-color: #ddd; + --drawer-close-color: #444; } + +header { + height: 3.1875rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0625rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0625rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0625rem; + content: ''; + height: 100%; + border: 0.0625rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0625rem; + content: ''; + height: 100%; + border: 0.0625rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0625rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0625rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #aaa; + --table-border-separator-color: #666; + --table-head-back-color: #e6e6e6; + --table-head-fore-color: #111; + --table-body-back-color: #f8f8f8; + --table-body-fore-color: #111; + --table-body-alt-back-color: #eee; } + +table { + border-collapse: separate; + border-spacing: 0; + : margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); } + table caption { + font-size: 1.25 * rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; + text-align: left;} + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0625rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0625rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0625rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 850px; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: 1 0 0; + margin-left: calc( 4 * var(--universal-margin)); + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: 100%; + border: 0; + border-bottom: 0.0625rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0625rem solid var(--table-border-color); + border-right: 0.0625rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0625rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0625rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0625rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #fafafa; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(2 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +:root { + --table-body-alt-back-color: #eee; } + +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #0277bd; + --mark-fore-color: #fafafa; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.5; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #444; + --modal-close-hover-color: #f0f0f0; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #e8e8e8; + --collapse-label-fore-color: #212121; + --collapse-label-hover-back-color: #f0f0f0; + --collapse-selected-label-back-color: #ececec; + --collapse-border-color: #ddd; + --collapse-content-back-color: #fafafa; + --collapse-selected-label-border-color: #0277bd; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.5rem; + cursor: pointer; + transition: background 0.3s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0625rem solid var(--collapse-border-color); + padding: calc(1.5 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-bottom-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0625rem solid var(--collapse-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 850px; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.secondary { + --mark-back-color: #d32f2f; } + +mark.tertiary { + --mark-back-color: #308732; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progess module CSS variable definitions */ +:root { + --progress-back-color: #ddd; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%23111' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.25rem 0.25rem 0 rgba(0, 0, 0, 0.125), 0 0.125rem 0.125rem -0.125rem rgba(0, 0, 0, 0.25); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0625rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-default.css.map */ diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st_2020.css b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st_2020.css new file mode 100644 index 0000000000..db8b406aa4 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/mini-st_2020.css @@ -0,0 +1,1711 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for STMicroelectronics icons (https://brandportal.st.com/document/26). +*/ +span.icon-st-update { + background-image: url("Update.svg"); } +span.icon-st-add { + background-image: url("Add button.svg"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo.png b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo.png new file mode 100644 index 0000000000000000000000000000000000000000..8b80057fd3a454a97de1c9d732b7fede82c83227 GIT binary patch literal 18616 zcmbTd^-~<*6D~X~?jgaQV8LAj0X_tm1Ydk1xVy{Z3GPmS;IP2r4oh%%cMl#Qcz~Pl zz5l>lZ`GVRHB&V|boY7A^z(F|Z=Y4=aIwg-006*MkpHOuZ?5<^0x;12-SsK9!v0Mt zmQpHG08kT${nrHb-!rC@ysj$%ki7ceKq56ESOEZeJ%x`_nqEey{^(v>eK${gL>pJ% zX8+KBAR_W-jhDrs{egi|sP<73DP`UFoa(>xj;8qknEx2bL~2@t%3k>}hnl@CWQrW@ zqfK>@e3$sL-m%ftg0YAkk!@=P!Ognuz(zhb|Tux{FeX<<7(5oLVU8=W*sUZ*$TqlSb6o1O0a zzeP#ZW!;?#>0N5v?0D|q?mzD8-<^@1V0FH{fY}2A9ooXbylcB6Y>PVo4nMxLi|AWA z8M(b#9`j|%0v7ktATOSzsh-T7%Wqa>t*x!29M*iDetE6#^`?iEoQW5F*w7rjcWYw>-UyKyDHetK@Im)qdu0o-zudq@gQN3)r z=(%XIh|%7(Y}2mODA6--)=u;7mi|lUCki50L@QOyZN@2N`Bwwn9et)BF?yQr9`Sn# ze!a;09%cuNiCJ+Hwx|5Sw&L`0rJvq<$7D5j#Y=O^YcW)1x!+MVRWRVHrXDj~g@40Q zBvp_niE6-dasJKX&t@%;X`7_R9QhT$w_Dv~zW73kCM;9WC z#^@^R#^^HZ#`rQ5ZjC*^uYUMgw=ae5*IV2JyEL@LlJ1k!yA8p=fmyQ={`Pjq&sK}Y>k9r>*Y-3njDRLc8z*D?su--n+y(fpV8FB zwS%vLw=L>F9>rMJzXaXgg5NRvaHPKO=qdV`%ecKE^q=CNs6^=Vl)5QG9h0>AKM-1F zvU-S)!Vnz~yg}XNmnaKSqm&}<1}#nOBCWZsLvn3_pkm8Z)~*KF8yv=yRk*!4rf$7T zT*ey^g`%>`O82HoVNPMCaM^5e_Eeop`^`Wsro=Q9SzJ-{LW5j1QdRH>Oq5bEX({TJ-TNGPvNBrk5{my=8FEQ%0fftv4 z)$FK)-usf%cyd|Y@=r@u!~HI3-5_Q=E%R!AkEqtv$Yv%Zit4K`i*n5tM!wdwLFM?% z@N0D&tLS9%TD>`41R~`%HzXtZS6pjo$}fsAA6cq`&Llq^TE@#ID4eU}(xZH$-0oa>g$RMe)N_S(=w@nXEL&?{|e zd%-=H@Ei^9kz3up?3!?QYr2O7^M9)q_E2E@^vESGQ&5WzDh<(QgQEd3BICrRm8O)S!fPO#z(h0}Vk) zolMw(Ecl!UD7xMUH0>?+9qzTMCMQxcM+Od*!L7F!tiwSSG>D@|J~*c~gu?`RewztA z1cO8*h9GGR{``zPp9t6vZJ81Ar<-bz38Jv-ro`wI#Mq&-k$*5tL<>Pk=)T1H_z8YhPJDWCuq5c#f&iDRo3$~XHhc-#T3{whJvB?;N^IKpX^H#=oYNa@u&^9He20t za7qlYKRH^S(Tj2{XC=lPI|MVMOVVX4V8cbx(9Ix%YK__iyN9E(k)118*aO-OzZNT# zbhE^f=Cze>bdhX>8xBFW70+=Tb@QnIyKKmQGt`}ZHXrVVWgxIT1k&eFDonM5iFh{^ z;FtT_qYo%x6$`ChDD~;i`c>h@T~X~pZ&-v==wrV4)ra@?=39Z}7c)OR&&9#@9uxU( z?hh)jyY_o}tH;1B>v%95XoGM@gDYB{I@;aJAn;N$2z~uDX|IL`uf-*Mm1ic21|E8c zQZWw`gvb==bz|iv=774j$zii$vlW@T4LDFEfea$Z+frqVA{<)qP_mhp2AbFqEE(0z zfCJgi{n&vKxpSY#-W)(E-Y3u@1KQGcnWN=qz;Nz2-6>bIL8wZk?oy8xe49zo9Evpm zI>QVA&&4C5*aCjxksX%9lfPpQNw|#TzMQ;YvC%Rx=uA#dmU{e@tzaW&rq}9N5VXBw z6Mff^1He^5U}j4TZD};Z7u2!LZ@OjGIPgR|MLZ*9%)E@0nE%K=W5s+NOT~n_{fBc9 z8DlU6un9om`MN~!FtpPXkJSq(+KPHqF&N23_vGeqphc*cEAF=okHGoFWHHWTm&R zAZXR)=q}Jv`jsvKCoL27h?ylNq0fz5xasR{P`5RW_7kzL^b_#T@e?r5nGKuMX?!lz zcEq|hYJscWj{YtO1of8Xi0jH z6s+!rS0;ag(Cml~|NKB+tNwwq9kl+8wc0!T$L$CFw95drNPiuZ3jOf4G_NXoM$sQj zZn*2v3^ISC(OoqO%W>m};%SHDOcD)D7%f&?jnrI9&1_u;6m(x2g#=wb zH$Cl!I6f#QI6iFo2i^nPy^8_Rt0g@Gzv3FoK629)r#wPie#!P^T*B)9JDi>Qta-Ee zyLS}t0#vL+3WcNfUo47o=g+h7Q(waq$0Fo`#^t+!ugP{n=lV`j6a9^vBl)I!L&VaI zK(10FWw?KM*=_ynJ3HIwyD^##=aKUk4u|yIYk$&C>^B?x{I5c+Il`m3RQ%_=Tq`!D zQw3HQ7dw%VR~rkqeqr+THi``YT){njI8j~%3VNWBl3EUyQ zx>y&BaDTkwjg$12&1?kD`IcCB_?j~8XMfHm4iQ(TCj7-)DOn-+%UzP)ab?nnNlfTA zh(FmGsK1tl`G8>eb=1j~9lDZPh<*?zhjW@Gx5%UjcH4 zbrrd<#%%JyFrW`_Loz= zP30^V%kIB;=&%K@{YbXT6@(|c>dXlNk~?15SVEmMX6`Mjv>+MN2M$^N?ju|1T-qoW zJQV;x5rIpTc>eCM*`;fq^U3U2uW>l1RVxe^4B$CEub2J}+bN)$=(gE92((ah@ar_) z+I|k<9;iL6@Dyhc+LX|pTR>r3{P!==s^guY!a#cZ5Ry6QtTzvk zUh~+ICB=TnC(!+~G1}X`=zKbJF=VNy60Le=gO@j5lEJet5>jc!PbM+D!ZlS$KuYx&pkm{S?k)BU1<65@ z({=ySGqzCiV-vc5qOJ z48y)rR(Ys{uWIjyQX*o`4?xK$K9nE1K!t$coI~(ku$IzWaVM`ocnY1)=&_o_R%I_2 zZ_{Cs>@7#7ktZS)0EENs++_HHh39c*#7z#Pyifk3+e!lsET`nm%a#Zp{hflp4Vw$+ zOju*)#0tN99xzE1;G}_c;Oj@<_%Z8;SCB3P74uOYE__wpp<3HB0g0wsxZ1toEwg)5 z23F}NQwRV%3UQi)GQQt^$a%zzV8w>aIl;CkQ!6h%=n!jXPZ;sfULBWNTi1QT%V~R| zdrjBQt+%&EcrjOO0&pO(SR|R1%nis?Q}KUl75Q=`bI5TGenEMls+QNXGp;Grr-EZVy`f(ovFSmI(u6D90n zU}rWOG+9F)ioe9yO)lx~AD<~|_xP=uVs4I z6w+kccIU+(Ltf0bDM$mvJrBdPzjnQ4w#L-qTZ+S6V5l=pqj|%(!m@K!R(Sm5G<;5V zXK~r#d34;M-;>*+VXbyWbw`4vdOanA^uK`Ag&w)G;7}_OpATxWe^GjFe%&*Ocx)w7 zwt4Bs4luF3C-9V+n~E!?(W3d6$CtEn7OZ{~I`6iW|1x;QzkF49GF&d=Wg#fC2^Vn?KLfW@n~pFc4gBpg!U$uFR0 z6`f||PCJat3glNlwW|z^j;^p%9oQc82S&N+!L>xWR*UT~JbFCj)0}2J6c-rV3iVO! z`IdFp zB0H{SvHRu;zx(EM(0%j9fA`HVZ|@5Oo0EGok@w*1K*{Sg3QERYynQ|7kzI{t_?~>T zQGQ|?TPR(EZYAFen;>d7>k zc`O4jwao>J?dp~fG@8l|SBHzOE5h7?Ba_OYs%93|;KP${8}j%VGb?LRi<;yffk06& zmc)TH`g@-+zt@fG!z|MO3057>Y}ppB{w8IS2o68)NnHSA-jKa+X$k+&Klw{5Ksly#ye_HBKV&h1zbIsIT-|0XRq)zWf_~s9{=n3BOfpPy7{f5RZzL^9tdzjj zr)R?-SV}4UX;&dWNKq={6q|g;FEbIjXC}?$K%uY_ur_MF+MkJ>-c@8l1|6F7^BR4N zf%t(1oJ!m zg^z<^ddW{6+A~!=F*1he)s`5=HR&3O@tjq)pn!{ zodn}X=d$=iUh-ibxQ>PQw|#fHTLppRwXG}*HyUkLKB?Vxf>#@2_z&V#B0Cjvmfka$ znI~k?Pp)A)OXy(kdOeH7nbmp9bNb|>|e%T7Dg>BKo&y=JzU)v zs{+P#O$)wko3MOQY!bv_78@Q%uABK!ZPIi<~iCxyQ>J*D53j_;0vks;+?UxqO^ z8)9k;>&t3F)oFofc_t(0cdCn(OIM;4fePgKSw+PKcigoQR9JV_C-y`&%By+|aMjTd z;$iN6>#`KNXtG+yNhfl+PYn(#cr;Nf>DZ1mRU`A-PFI}Scq~0EgRR31c4LZcz_w!3 zU&-x*oGPQoz`-m#bYEC;V<7tHiC(wn395M}YNU9p|6@2$$6(9N_DyMjuOwT6X&Cu> zXg1{_^+%NsBhDf;)3V~J5%bl|^XVjqRgu^moR2288%NOgcLoNBkN6t5F&l2`tPvao zfAbQy!&*Ln*uWc{tVDqwT1{Q>{s19S6+;c@2e$2eZd>zL~I~M}G^8w4Y2bnyq)>=S+L6j%|@%XWqbYm%+}R z%Jg=|X7Y&0*lujN6>tzy)?{CBuT|FT#I=sU+569+)8oyIH?8?{Y{Im(PMHAGs5_GI z>1wLl+yiE$+I28-c2!jx)_?k2nIm}7iH=O{X#yL$s@}hUPf^xece9Vi{DUPRKm%@= zI4q=C$Qla?I0{;1W!^-Bt)o=r>#KNZnZPW3piq_&q`~HLF~1_^MHlt66*62}BJqzu zM;g!LlycVJ?1ohPMvFHu3^-`<`sR(iyLG`EB|;bk%3GG!#?x`m5gx zWnZm7bb@UTrR9OXVs1t)?(5a%Yqq>?ivrob2S7W|CH$C|Kscw z=5hgFRsHTTA{lDQ(a0VW8vk$By+wL4Ao<5{Br)oU$x2pMfJKrlPqr@4P$Y9Nt_7R| zCx>hhMeHtjM0mJ|?T<(EIY{^^cAiA&R=2C=g&o@6vm!E&&86BrLOf18fr==x77OBH zdyOvB1fjqxDMa5;G9@=qu?tN_vB?)=#H^qB;g*jHrr^*ISGt+pLXyWcu+bAWNk&IG zl?zGxV&+)tmQ@d~T5Yypa4*^P5t*t6C($W-Y9zknsGLXPPDR^RF~`>QcV4iB%ltJg#%JgzSOl!L!d<7;Gfa5FAv zjVdBTD(TpZ3>zF8@VbIAM{aYtDv8fh>oAmOoV`*>G_abe#aOPM+6b%!IzPP2K{>A5U*>>2+^+79)a z;+jQ03qhGCNA7Yx7^lX9Ba9FuFHNen`s{buqNeEv)$x#QoePK6M~soRL17NVafu`4RB%F$`Pl z5~X9X{(zDkw(=x-=6pOllhfSrJCozywriAokKZ^VZ?epc?F2YfOmC=V98gW?oL=*# zC!4VJtdyAXwE6cHlNoijVy3KiZxeTrjL5AO4?|IT4#6gV63bUTC!(fd*MK@3^J@F! zOg&Y}^l`KyT>$RnH8O17_%?_PVh?o(+5L|_R7c|c+R_PRXb26L8QM&z+5MaH{wtOk zn}L=^TXs*WwrBLOJ6hDKim{LKAa3?WEiRefh;#TMZ3y1zA%QAUYh={Ux!GU!o~ zQNH$+pUp$BPoB27%q zF^6BflF{;t=SZSz+GrMJ3q~ti7gQ;5SbjS`5!DFxQB8KOt1OQ(G%_V;vcdj>K_dXjNxb}0M?HyjDs(afDCVx%>+I2GAO;jMfy0Iwh$=Utfm z5snMAm4|C3O1?MDEQ%I@RL1I{SrN67(Q)b*7k&Ip+-THJr%-;ILx=v!SaW75@EH3` zUhVOn4CYZ>iZ!iaGNBq9Be`Mcq5Opf?{HZfcJM-VDr$qSCy^3Lij|O&UW{&ffZ&!( zaA9$H9_5lFs;vRx6|mmn{Ic~u%y*(_t~*m12^>%iUOQ9Ap<@`U;!iRpBZ5y=p}@B6 zSP;R6QS{hs7)q75Mgj7814d~Bae=<{A1Z5>;LN66N?m?;5pl?`*_wW1l4a8IBb4tyR6@^@^BOm`{tD6YyAv};)Te2G+K}4;<~T9 ztiHbWTlGjD1=omQ_viT9PJOR7GjZ^{`7u?a_$hGpx54G9Z4Uj-NJ+>3SA0ZSx1vXw zLxYWusP2Sm*#o~_#B)vb&lTfmtsonTnPHIvx!#}HYvp=bPcZe zcHOCWuo0{MxR+#P#Pz1PSlaT$g-HbB!hTlHpV_F!Ay^U-vb1-6W)!xh?3imeOv*Z3 z=D=Ij-4e>!J=_Q#nqT5Fkomgv(@3uQo!?=8R9Sw(0)&ni z2jsV8*xm^OAO91C)$^*!X=%ZHvh_G35URQ9mZ|{A0)E?gJcL0T$H-NA92s6VF$CYW z9RHBse3R!V%B}9#+)P1_9L@j@2VcH-GZ=N2{$k05r?kj$KxpvthW zd7m|F4Ka%sEOHJC`oN z{Q9h2$S$VYkMHBEw7ybMx&7`nIaMLI5n~s)u5f7_tg^|2p4eFF&|6C45|-}T zY2bbCicJ7u0b>nvzMSvbBTOChoOAKvC$b5)Y}lT;{a-@oZBJ!oQNfsC36M4qtjvVR zX;Qkn$Pw56!sOMyw2f6>a4-#^ zy$1D*lt}-KofQ^atUig?;uYP;un=4nq7RPpS6+7^7eT`a+9Hs&(5Wu`IyLv0kJINP zH{2$kHb`Me^3C!975F7KG!qcJ%Ot-tp1f*bJffu1KR9B1lQ=XYBq15?hlJ33*QN-~ z25i$#OI}x{k+-P3EKo3v2XVk4?t;KE4nj1dk!Zo@w6D?!o#k^~T|3?;an*{_dc}rZ zWWWrKbdBu0k$7Zn5A%~0$lei$vU1P?CE&!L*!t%`ziuxu= z$+Xt=qUvFYn;a&JSK-D!mWnDWtF|5q!R|hT$Hv!*O-Hv$ zFMd5*W#~$3AJN-2|IVd@2bWN6TIfD_0uz(~vS50vn&4k2seimRF5`Q+1IS}!NNHN| zuWuQz50#5kO>f(wTSg+{VKXLrOZR$Gm~DhS1f%%-9{FGG$s*ZrqKZL|g5VaRU11N3WB;tGWJx5jj1rPZ1}$YE7~gsu zE25FmauDeN0tjmI!T8LA_@Jktp-r4gQRI3~pz@ext*^u56U%RNNACtB2^N&i&Zkq_ z`%gV|mr`$f?Rog-De|tRlA$9w&gIG-7Zqk}`K~S#ez0!r0TA4$*?1vW^S1eRHim+x~x!Fuo?ZZGGykdj`C(v!pIX!M7^#v%t*g zcznI+6jSi4g8knZOJ2XD^*-Nu8++1xNL67@Dpa}id>w3=oC<2l|TauHqSGbyr z9Lb=M3fe$ymZM2IcIy2$WhWPLfA8YEy!~$2XHICgk})!EbwTa@re-=DC1|8#7fNFq6gJ2K}GKAX`f_@q32jY5x4yTSxUH;`}j*L?c8b@JA9D(4X1n>r5 zmjA{5zUzqX9?77@2f4TGSC#Gv z>RXD%m8Sx#GLz`?10nyLA3f`rKtm)2mp8 z2WUMD#ZK*6rx@tHUO&Z&$15&*p$9S&RarVs7nI?jWCTx!i z0n`(39&^Y>ScN)8+_K-B#JBi}jEM2qqgbCqWKx*4*ll_rs)9n)b|4=f&23 zGJ5Ub{5j_`P?1;gHXtz{3VvNPjI4v63M z7VR-O|JQRM-E&ZagmZ6Y#+`oTU{Zdpg*T>rA?e2lXyimlx-MsB_vpS!^2jDQhm%@q z{n8XwoaYQc8y7Itb%2)$a=$~0tev`)%-s+AXZ8I@XV4DuPx#4Z3^R?1Q&1e*!{+@j zwy0-{m|^s)xqlSU>jQk{owo@5+inF)-p_24DlAw`pUe~G8ATB<-h>G97|FK_kfkQlN-!Xir7CB=dF)cJj`)++W>CeZ z0KpG5Ul%&-7q_N%mRtvtM37+jS>A#7p`RadxDFCIFsAEA)28 zRc#)^^3Z1>`W_P8_n+_5l5pGfayTk_=7^k}d#ir!c>8mR4k$J+> z7$;sN^3k#e1A<-CaO6F6V7^1u(puc4hVnfPK2u$wSE_XF>^Bp?OAv{2Y8)b{(a(2LFQfe!w)T1x>k{ZpuhTF(Y6rhpZbrH!ElxM! z5seXw{2(-vFEyNn8P2QzldxYgR;$=9Va+n>oR-HQXL;u7|E|m|OuX!t) z=Y4P{a-kdSJHXaCvpi=8=DW$Bomevgq&Ys4T71MX_~k_QpcOJ7j|>5e z8fKax8KCNY#00?1+;-F_`mYl6?wiA0M9-%AWH7g{~~uALu>r1q7;w|*!aJIeE{mR8WtR@KBhs8TcC2jA=CW|Xy-ycIi>d)c7Okmo?_;IS6kWJ z(`FLRj~hxiQw>hGi`}`RB+q+jpRWZ9z114q7dyj#>yMG?n=NfcSz}CGOi5Bt#D4u( zFREX`PCs3=cqxne=H=$udT;=|-YI7ij;hPlH)3oXm z`Zikh-OIS^*V9YKw;%r4iW?YA#ppM%LKP=jnMYQ)JEBqy1t4U@E<8VwMW2U*KvaS5 zNDwVyHjTg6hvcbS>{N7lJu=~^Ut)S#sq~v9%#hIV2H~>o^9=!kEGypac0E4e6TQIW zr~+Bn`Sb4k*0*Zts;f;Vq@fsZn1hLBQyIO8W(13u0211vHK)RMC5neH4xx7?6jMVOl3i-ENH1NU{ z-FW1hXwfmWi;TOg`k_dSL1ckNlukjE5IiKg=2DaEcWG#qTCd+ts`vavz;Wye>fPE6 zy5Y~H#6~R#r29XgZcKEUWF`#TkPjT0Tb$nr`$rM*rO!0=z{AwY-%*%Y>1iy07;xo= zlqRRR7Oc25bnNStf}IG@3`}b^k0oTD!zg(19YJjRnXs}9jracK>Fw6_hgpNk9M$d_ zY;%@p@*94vn6~^S;rS|c_SBN9%41Y5CNDz~xgJ>zs5bOlC^*0Hm`3d+UdEAQlhAJ~ z9rS!JpiEjf-g5TxWc*_}=Uu;kRBG#hg)R{HVt_KfnWZwXW)vK%qN^F`Uk1yRWlJX^%Xv zrk4pFBKoY0c4V8}-7;k5jeHn#no6bE=CpUiQ*YjAXr&^e4Ji=kd5l#`F`6lq$7V{v z3HxGM@4$C!_rCJ0-}}J#b+>i@#M5T@ zDq!my3QKfc?}%tQt*O2KZN233YvPN6nJ}^KNmAv>Z%4u&!~ecZRVXA}Vl6Juc1QC% z^+u0V1RbM%wwc6J;|v%G|8k{t}#XaV3b2aS>;{E0?a{QN?D zjap1}Foj*+4gOfLe03+j+-fGX6EVmh%q%{kCs18^=Y$ttM`Ru~Sih(@mxvo*(|OHJwq(zE2(ex%#gkzo*Y14gL&0 zb&R`Soa5K^wB%jo6cc>zQGL@J1IWOVy&G6nrZ5tClv8t|5cv^+Gb2^+T0kC3kdVb= zzt>d9Y8%qhJjVP{A;^*2E;@stxE=CCM8#hlN3jEzVQ}z~l*fFX-3jF?-%dnrKMp>* z+*ojsjy{>@Jvb5ZmHokSc4fmUNZRBEvkDd^(WV&AoGicLZM&xx+F?MzT8H=FtNK9| zS}XSejv}P(R*P5=IL)L^{d8bx{SC>9DDxXj4@z-n^Hya-p}k%LC>kvh2A}eK-{n8P z{ymeI^r5$}WuJ`hTT7y&m(wGugFoqC45jML$-|3L7JDo`mbG@4AeOa9^F5Xfc~AdJ z6z*HExRMYeE;qZsGE(eCPFCa$fMk$Uzn)5Lqpt$(K3(+J)whl&sJ0{&+hDO7rV zmH=Vx#~{t)BZI;GL9NP4eoCJAPi}V8s2_pM0^Qn!dLjeT+!j52$p%MSaS9-1=VIXE zZZI?CV3-Z~UNNk|?P_bEXiaFvcS$(=j(imNA_Txz*qk*3Zt> zNTsgN3vU6G(NEuWibkSSE-gZ&wr@}`tuvHEIJGFQY)vT7_Sn%Zf>;noCdR{II*9Uy zi1DPT!QZt9edc?XCO_%vF)Vha6tK-jiPV+wdZr2-8Z+moIE4fA9Um2wrmprd`ujDw zA4$!<#8*6C%(UP!wX!r@9XeCS{UX~rhBT6- z&m5@`REID~K)qRRLN40)>Fz=?P=C-jXZA1}lMo#Lic@|(zYtC?Sr$}gjz;wX-)dH; z>kQvsjFQ|FEvL5r4GE`Vi>HJ+qxMkQH`jx)M#C81t{fBmVaUEu2p_>}$^Lp*OiKYZg_C_ycw2+?0OT`)la$oyQwx zn_edD@HInp4-Gny;i{I~SnCp_RpFSS_!Eo_CI3DYHotlBCu`)~d17BV58M;K#oqAY zMpX+Xw9;xj#wpOozs(lT<+Th^5&14m(|Q*%;z`vKh4SNgAVBe}N~g2sLPrFC2|fE< zFpnnM-xp>{8@7DssTYKd@0S%KXilVkqrjiHGyiM<4X=4ToUoPe$O?bRyn$W!y*w+D z6&Dp2t9Ct*jrJO53Vv$UzniUP=-;pr=_NhmXKlFLRkmbSfW7QwHhvWb87Y|_ zx8ovSSXKm9h{zGnW$Hh-iI?ZMHSbjn*3Sh{-$#hX$;rQovTb9bL)q_$Wc zZmKiDhCM5p5vXSn($(MVPz`Tl^8Dq9O!MXzxdIh}Yi;I?zh>o(TXxwNlF}fbbJWC- z#GcWxTx796z)2UUjk&XWZFb3^oh-r)7Kkx{urkexT2D1!HLjPN~zvz2X#hz4#kSWLV*CW#DJu#do;exLU5E*Yb2H*HhXE&}5w)`L0O>xl{F?nRCT2 z*sv_q70&aZdR}eGSdA;#MccWyIlME%-v<$!Uv*^qnA&%(krwShZthK$iyit6H#l;> zK-^@!-w;mtEMfj7rnxx}?MKV=JHn^z-cHiGPN(d-mV0j(9hnwwg#l4%su_AWn&D=e zjR-cx9)55a@TwJcUi!8R@A2vD&T99g^diZcn-!n?8)u3269>8(cQRcMciiUGO^eip z5B)0E8kXbcz#sx*&|^TUl$Lb)lb&Ip>#TdtDfUcwzE~nzmuQ7EmTjAgdgUiGuSuNa zpCb6rE6(O5o(^pW-+RuE)g@nrZK=PFeQcL58r8o>9J$FQ<9+2A1d*DBdQ!b*dT;;4 z$Xo4EWN=S2^E$tAy9hSL=6Vn#bHD2g;0=sNhjJ6d)KUocZ)+A6o6_A*qTK}$*h#RS zyk#XkuOO@^1ht8v-%9N{Y9oewzu$e7L(scb^mXW2_TiW*-y)vNyH`OadIrI^Y>*Zd zp?=ROXFoq0Kk^tpwCFt$B)QKsZPM$&nJ*fs2;Xd)FtPd@FMUTnfVUp;sJHFaw;TuBTKR%BOW_}ClL_Bhz{A0l{Qgc%@tjIWj2ys8T z-56z(;=%E*LE!6!#2)6$>Eq4>1p;7`)Z_NSc1X=l%@0`gB7usIOR#p2{Cap%H#@u+ z`w+GL;VMer0DCjGMC|TGF_;&EgwZvSq=Q8@4}X7rF+n51h%CM@hl5WX$J z1a?I~km{+qh|RA-3+BNxgHjmg>KA!Bo!rA$QbB?cckI}KdkcLRox3JZd`fkXjx#A+ z_&En<1xc&Qmnoz0c*OV_guW?$J#uUHP(jS@beks0sZ#) z21ebzv6U?Wp@^S4Wn-$u_zmK3cE*C1Mlc5xAi|J_lu9>vY@H z+=VfBpk=&5g2V=pY;m2PHSN1`4hDAzs43VInEYm~-~S`AxRI%f?TU84wXtx z=s<1xk#OUIW)~ZG_2?E}ncAz?RlZ%Nu{wqJtc71aL~G>$Y^@Cl^I zh)|w&6EwGxERMm32{6|adN{lmCnO=?!|jUP3Ws1;e!SWGzjeq)Lvs!ZTTq&ie5vo- z`1p%Yqwt8KsRfc+Zbj`#L-1}(Bwi~Ax5qO&ZU@{ejQ+Hp4mt4VPoV_VeCr(6zF z9UR1ae&+2iX+s6E2V}Lxc6ZM+-8S6$a@?&Cn^C~=sPX~d#JLm;5Qw1n%IW*&PBV?q z09O(5{}gEc5xG_jOowcjF=x4y(&YamY5r}Y`?S#80Bh&J&-}>XgL{roRVEZo{x*i~ ziq&;TCj2%^Ju@%&4lTnyhe)5-5PDrQb*+9kAHW!EOaiu61g8cl_=CS1bA@HjhP}H5 zEBJUSKy2WF;ua_T{{-d-8TdvHidCA`BXq&j4cFtL z^yXVy20#nD1@%y@Y5U4sF1MvXa8K;F7B|Z;gH>tspveGY5S|}@U_A#|Imi?6GS1f%=ROP|BEkV#WqVG3b_;n2 z;H#;^adfh%ovD>w5Gs4>tI$7iJW3x%2mWus`fl%IFZf2qhN?JgWZYM_WBdsAyZ9Ln zRkEUt($@b`?c4fgl`7mn2lzu)}t zF)QPs=rMRr?Dp9+=yMv@`)?NKswHtVMS+34S>A@W)D9NFirDEhF)P8UhG0LzO-*O0 zw~iYtAHX;-bhAs~r#R<26~a<=Te-BB1z_}yavF7s_X>@Au~8kI-fv?*ch&2-MEDeRpn$| zQs#J6{sP}E#c@zKLH{=n*1NNgxp^;34)cyq+y$_nMaXHdPefdQB&ZYuaBF&F+#jI) z5iI(HZ*=0~V#^Xg^oqt{LGBS3`Mzzz-b6=qrl1#6B|u? z)MRjg9LIM9!?@uFajP;=#Ssg@2~wUs91pUhTWF1+X;!z;#!7zZ!HA3(S&VVh0-H-7)D5Ez?jhb5*13LRK%!y+ z0JbakM=Tfr@d$}P-7SM{#QqrU2pOeg#laPR_u*ECoxGxwD+5qp7mJFAC4KD`kx<@y z!H-TwF(`nXfja!2zxynS|Kfw?Nv{=+iYwx~iR_4 zsDFPJT72Tn&;L~mWIpqIHR?q6{H5=03xogjIQ00LT=Sm?Yu??dTo^X%GTU3y3 z5U%wt^lQ~lI;@oqpCR=JSG?o&&sGC)JkTBL$iPQn)gVhj=u1Ww=)nAbnfA|CTF1W} zHDFT%X57(fTIQ+HQ=ZLM-4b?z)=H^8gSHr jqXrx`;HZHtT?79Qd=?ufS>7*000000NkvXXu0mjfyH5ns literal 0 HcmV?d00001 diff --git a/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo_2020.png b/system/Drivers/CMSIS/Device/ST/STM32C0xx/_htmresc/st_logo_2020.png new file mode 100644 index 0000000000000000000000000000000000000000..d6cebb5ac70e0594cbe37a6b60036a80ef3bed37 GIT binary patch literal 7520 zcmcI|WmKC@*KTl!K!Z~t6qn*&DDF_CK%q#B6QmH_DHL}I6b%;K-J$eBN|2xh0+bea zmtyV5bG|?CpZBcu=iF<}z4q*xz1LhL*PcBwx;m;Pgmi=e0DweYO-UaBz)*UWZ}4#+ zCC-V!SC16}H#HLv0Dy?%--0o{5_}H;Jf%=ql7H=+dziOk_)KzUSaiQ9L<^g!49k}} z?4y$V zrsn3Ul^TY`00G_J_8;F7Sr5c3Y)f-yOYl{fS0avfKJg7R%r!y-ohcBkr6XBZBkE)( z_t+tVV2}G1_CN!)yWes*wa-AGwk31N_T1`)4COlfz+o(9S90e?6jHV4)!>`j+oRqp z)gb?rtSdw<#&c?q!OKB+Ncn!kr5JR2EYan8HAPXBw*Oh-F(6GmaC!`$p7fl!_Cdu> z5@PUMR_K5&jgevDepWqepZVdMHR$q>ga=7k0ltW$HHVn>HRa!#(+BW_jN$5rx^MtR zzWT7tNWQeFzEp+86jOYI=I)*GZYEiXlf-Mw%tJ^ptL%2)%#PmUjxC4wx@%KxQ)8kO?|7E1 zd@5gd9_$*6nx?fj*iF_EJT*PYLFP}d8*Fw>cu3@&nm%V_C}V7HMmg|Nl#1J1^#)uz zZag|X>{6j-myvL}3(H8o3resNBq_jcuJuyT!QuXnNN&zG^tG? z>y*dy1#XfwyCE#UiLT(~LYAVwp)epErJLsHBA|l0xo)kxLAPob+7tFlr{7x8(#v|O zknK}QC6|~=cTJ0;x9MWMKua;LdTKIHX>35a@7{5y0MQ|zqsP64mM~`gJ&&R{pSUBA zf3Y>k>d|xdzBFztjtO~{y%@LUdwSgzEj=69hH3-NNWx7<|49%2%lvTEeE3_|$~iDd zlktnxf|NB>Bui)yY;%TXgWA;rhODxR!-4GzxKd473I)3;j zS4-Vun<^vqZ4)HbwVzq%5%)S!>Q(Y&PkF ze1ab_oy?_$PZT-mKJ3K^;6MrB*Wc$lkYJ_460AFYEq{AjlDxm;5GRwOsm>doJy3Z;a$FSu-q`X)Hw&o~?_`Dnpx4dOj6#)bGOdZbj4hD`l|&#v~K+WrGO zpLCVQg=*h=4H1sK)D*Pxtb#p`c+g-eK65k!CEZjLIrfm}5<4@KVqZ#8(S$vs{?Xv) zN(}CKeeLR%I)W!p(l-`utKmBbJk-On{)ciqUN5%?TS8uwKU(8}Mxhsb&qHL~DDcB@qi} z4z%efV#K69a#lShPt5}*7ME@^xunFR{k;|qp z`_Hgdj_Qle?%Ydlr3f^SdRkUncIj7qTiu85tA$v`#419Nlof8tjqUjO z!Rwyq$Krfh`(@MiE+)yie&jU^crprYV&?zN!2b33S2qtW+zB$nahDhVZiQ12bmcwYBcT8KS>v`jsuI@X zy^k^7>TM5Ndp@}pSl6vmkk*u`@C`z(gq||K2>y=Y#w1i`Nk2zAP7{_^ACq;bQmT<4 z;b~K3=?mhZX#~jQnZjdU={NFp^HRr~;^PXQ*UIHzkq}Xsn!56*ZCOOEt|^ zawUwGqs;zCEGKTz&(a(@h#0sCE+@`3Y<&}9!(;Pw&`C+d#D?`##&!@*ERaH0fksrh zfk2svh3!d~h{SC6BNKN2j6(lzC>S^_*eh{@gR zP$rV4$nqV1y|zYpd;nQr-`Vlp(5sQXx9AibC?xc7pUV)v2cWfHu3{KLbfP;;;`I&)mWqLcXt6s+5fps9R?K>hGR$5;=( zo#;zzQ5!w+(99p1_gh^?F#$tpMd+4%G|K`XG_#@A>30WD2L9!0a>wRASg`M?^z#)| zifb$d^KUD&3qLsr-@}r_7p${gdmRqhy819bj?yI-v({I?0o3_8d>CZmCzqH4{{QtD z|6dvgm<^~668G`6wLw4C4y-o9E9ZG3RiH^&;rrKSBT@bMR+!TlYo*9P;?Z>xORMV3ndQp9EyNn!!~j&x&$gDVke|t#!{QoegHm+sT7cSjwSu z)jZlx1pHrrx0&YCZWJ4xC&U%r_IwfJOxnYqYMcZn&_hgnKuls z>(Y$qjIhcweo^A_VVq_#UR&urF%UbI^><5L5zbV9owMQviM*_{@i|dke!!v8a_yG! zl%#ay{(6U_N3-)yeif3tx6>aQSf1r zO~OuNW<8a~bi6Xby0@tKw0@f1R!@+3S2nf#F&j~l0mrNCtjoZdPYob?g!Vx4F-uA2 z4uS>8eR?dA9i>C|cm-m5lO0m@$f(DB6Z<9Pe07xR`l4$ks3eZ@v5}1?^YNQy-tB(` zgUNZrGVf#b~`}jew;MQG1O~VDk_i*<)p9DfFfd;vLy4QZT zMYh|DxJg3-!{szUN*uo&`&DUkzq4qG2`Lj;Ar46DYUymcviS{Unhzmx z=LwZ-Lr{t1z?9Oip%!z{j+Z%_@u?C78I`V4fC`icG1c|2;`EoLK$ z)9|wrAV&V1Vgts~tQCw0X?X{74W"NJQ zW3BP!5c~4zzHJScwQK9L_%m%L`*q{1aW_3rObki~B~=Dwp`;@w`>xZ6;L_6oR^ecEcmup`yb}lgsmv zQByrxc)Qqm(Hwmq%fLjqcrJ5QR?z_*vb~Iy~RXUY8u-D8AqTzetwNNA8~N z$j&1>#IrkSslUqXW|l}q_TlTVKAjRI@~7(GLf4M>GM!3u_)y6ORe6BQUmrQ16%OdZKo(?AYXK$u@=)TPUi1EZaLBu zuEB(5GX2vcoHS%zMUW!DZ)&xRo@mhouk|hMgHIG>cO-Ah(0AMNlq@?cPpy==-!#qR zBov7l3G?P*KM(vU;Apo-(-Bw;sdQJkh~r)W$KRQKd!#(A8M34^MhD10Ra={AqSvjy z3>PkgA}f^@Rg1$dX=jaEB_V%_vn(W<111_s!g>CYrcwJTJ63Eeg6{_C`aMQIgKctR zHMjkr+y6gK!v6=6;CGl#?PqmiX`A@dmmvZ}-X$*q8}G(xq|voo`=$YZuQAa8f9ApK z1VQiEUQC=OO{|Nc8ZrXH208X|XCzIRO?+Nb55Jt@va9hqBpv)uY6ma-csvSlJoJOC zK;w~s?#r)K@gm*;((JsWHU-KvFTF)q>AzwPq)I+}OrSpxh!-CM1VEMfw1fpfVL7p{ z)I$rNp5kPYDsvXL>8nV{#0fa*lm`Z;0Z=c^1qveY2uk&7nhMRl`0EsvUuvwdF&o)PCVN3wmFBPegWzooF6y~b} zY>X2;LO~&rbvx59?(4^aR+s1C6hI4r&x9Q9jL9);KZEw_x%TWZXaMzK6|2XG9$IU% zkEq}t^YOaa4s`%7F31X-#SfMgNp+4R=g2G|O^W)6^2fEsmkTTaVhKCip+3qWuN8?y zaSD_k6%-@Ifhm`z02=ZWA-pi5`A=7ztHWpP2K5rCW{>!wIUOYrH``#bz>qVSH76=8 zyJ!sNBxt;dMTn}yzUTCq1!w;N7pzb?WJrQ50W+`meL{k8i0VhFsPUz(07k`l` zg1Ifl1fc-^p^MQCpK~Jk&L!*mWfNA!&MSu`sPmti>K-;I5Dk00nB3vOl4!JwjEx^X zWQsIp2Ea_>`9f@%zGl4i3FAO9=e$2^b_>_I*dqiLJ=@TejStM?^yX$9dW`#ha)PEF zPr0zUJX!j-juYK*olG_9axQniXhF|E}oSTG_S)FZ3sN4T@q zy{l;!{UGc};YVaT97tx3s7P$WsW2^*I+Hy;vqndG!9S?tZtDIRif1=bBsqtW-n7$O zWy}Z%jKSkgLX#1p>|#4l-!$c+kA`++Ixv(Rm`;Ilb3q3tD|QjaPQ8)BJ=8R*15?nL zJR{yuqOG&!JrSZ${#NY#b!k)yDajQ$A}fUQhe7ueN6h2Pj3wY5eo|7$PaJD zM69(ee1qlSyLn)Ln6)o53Lj)elqG}gb^c}qd(q&$8B5N%nSvEjUIoEXO^obv=A7QGZzNzjO*H=*b2!86Wnqdy~8ePkq@1D1)Q^O)JG;fUCV z`rgD}dJ{7BUyBbgoTL91w^q-CfBpDr?0R38`L%p9&Q#%r*@=9p-Ioqy+WscLq?jq5 zfyYNkxr7w)-(!c85mt!FjNJ4UE6P8p8sc#Kb4L1N3!yaCo9@t3n8s}K)1!w8x77xU zo-NY3SR*Pgt#~7F;y^J&Y%z^+C9wu;hN|TC7dqSHOB&kE)Q)6Ad(l&+tA@$@w0bhJ z6xc6EJ6nm{=|V7Vo&qcXc4i)D?X0Uk$p7~iI#ci?#fxvM z78`u%m5S@^_F;_foidufzP z&ueh-zU1yM&8~0lmOfkio-gBex`)?hCJcI8Jv*R0c|WUqSq z?RU?Rmm=3t_2C%%UW9c*D%T{T{EjryCKnsz9-*Bs0}M*xS&-odhCK5eS_Eqi&c6J4o|f&;uUT=p7Fedw#EUl4%Jv{w zq-cCF^otBvw~~$yj6O>>;VqU)3Ml&Atm$B(Ht8=+&x2VS5aWD&t*+04{@k^Gn~yHY zWYC%@ld;g_qz=k*;Iv&xs5M85cEZCU&n2Baf>R6*bN>V|!)eF&l#C93eAMLD=ZF7= zOISFfB5P;F!ngWD3jfMJE_53F&dFc{h2TwSbT*(h6!c}_5_UFeB_*DiyCrtQ7Byr@ z-aCWVt?J}YP7-lfelbrCgZ5mdv(^W&Yf^OvpI}#NbS1Lc`r4&t#3kM!utm&#a;?GR z-1FusfX7&?a9h`%8wf-ub7UXp44xm4w04)S$}}_hPqn-#IabO^bo6$K07>?%G5Xs( zA$*lz_K>lAJ_o<;fsP-*-%~O(716KRqVq+X@=5J~Z~bba(yWL`;EN`@Mr2it&Lkgb z&I|R5!`ZSk%)xFX*FYDaAh=5qWSY@rx1Du9J$$=lh#!~NcFJM&aOv)eqg_@`i^zJCR9a%_{k_i%msw5q z*3!~#Xx3r|VaAwiG}~9M#c`=$Uk6~xe)47ymW+;0DD_lV67L#ouJBa7mF{)X^?eIvPdOMu4ksr`jUP$~{x@?ev2 zdX#ite2RMim01PEg`;qfwg^;v8nx9F!CtNCvz)V{PVgCs*;_@_Rk*oLx@f7hJ7^^1 zu66b)mb!ZMXLZ%8dj-+JCMoWS-Wji-Q-~U7Pt~UiXMej8JcNjk<6?Wk9eLBIhu&Vo^0;AH> z;Q5^a!NZhP(vDfBv&?jdnQavv#8N0E{ZEgs>|1)qYo^t5 zIV$g~`C2%g$*(z4)8hJlK2mF-MJW#3%Cs6`uAvsgRtTo8n!Et)1pZx@_9I18 zw7ER9v~DyrC*R$do9aEw5r@B)YzHOLB^-c9Eu9D!sFmI8^VljVKE89{zY_8PTSF+J b^}%0^qYmp2WD(pA|JtZ4>nPPKybJpu3@X?! literal 0 HcmV?d00001 diff --git a/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md b/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md index 31aba7a745..93937206ee 100644 --- a/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md +++ b/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md @@ -1,5 +1,6 @@ # STM32YYxx CMSIS version: + * STM32C0: 1.0.0 * STM32F0: 2.3.6 * STM32F1: 4.3.3 * STM32F2: 2.2.5 From 9307dd3fd37c43d7d9b912960ad776176c30dc69 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:37 +0100 Subject: [PATCH 03/23] system(C0): add STM32C0xx system source files Signed-off-by: Frederic Pillon --- system/STM32C0xx/stm32c0xx_hal_conf.h | 16 ++ system/STM32C0xx/stm32c0xx_hal_conf_default.h | 270 ++++++++++++++++++ system/STM32C0xx/system_stm32c0xx.c | 228 +++++++++++++++ 3 files changed, 514 insertions(+) create mode 100644 system/STM32C0xx/stm32c0xx_hal_conf.h create mode 100644 system/STM32C0xx/stm32c0xx_hal_conf_default.h create mode 100644 system/STM32C0xx/system_stm32c0xx.c diff --git a/system/STM32C0xx/stm32c0xx_hal_conf.h b/system/STM32C0xx/stm32c0xx_hal_conf.h new file mode 100644 index 0000000000..a12f05dc45 --- /dev/null +++ b/system/STM32C0xx/stm32c0xx_hal_conf.h @@ -0,0 +1,16 @@ +#ifndef __STM32C0xx_HAL_CONF_H +#define __STM32C0xx_HAL_CONF_H + +#include "variant.h" + +/* STM32C0xx specific HAL configuration options. */ +#if __has_include("hal_conf_custom.h") +#include "hal_conf_custom.h" +#else +#if __has_include("hal_conf_extra.h") +#include "hal_conf_extra.h" +#endif +#include "stm32c0xx_hal_conf_default.h" +#endif + +#endif /* __STM32C0xx_HAL_CONF_H */ \ No newline at end of file diff --git a/system/STM32C0xx/stm32c0xx_hal_conf_default.h b/system/STM32C0xx/stm32c0xx_hal_conf_default.h new file mode 100644 index 0000000000..ba22efb5bd --- /dev/null +++ b/system/STM32C0xx/stm32c0xx_hal_conf_default.h @@ -0,0 +1,270 @@ +/** + ****************************************************************************** + * @file stm32c0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32c0xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C0xx_HAL_CONF_H +#define STM32C0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32c0xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (48000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +#if !defined (LSI_STARTUP_TIME) +#define LSI_STARTUP_TIME 130UL /*!< Time out for LSI start up, in ms */ +#endif /* LSI_STARTUP_TIME */ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include modules header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32c0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32c0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32c0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32c0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32c0xx_hal_adc.h" +#include "stm32c0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32c0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32c0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32c0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32c0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32c0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32c0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32c0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32c0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32c0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32c0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32c0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32c0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32c0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32c0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32c0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32c0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32C0xx_HAL_CONF_H */ diff --git a/system/STM32C0xx/system_stm32c0xx.c b/system/STM32C0xx/system_stm32c0xx.c new file mode 100644 index 0000000000..f0e137f151 --- /dev/null +++ b/system/STM32C0xx/system_stm32c0xx.c @@ -0,0 +1,228 @@ +/** + ****************************************************************************** + * @file system_stm32c0xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32c0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32c0xx_system + * @{ + */ + +/** @addtogroup STM32C0xx_System_Private_Includes + * @{ + */ + +#include "stm32c0xx.h" + +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE (48000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +//#define VECT_TAB_SRAM +#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 48000000UL; + + const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL}; + const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL}; + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32C0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ +void SystemInit(void) +{ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE + * + * - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE + * + * (**) HSI_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32c0xx_hal_conf.h file (default value + * 48 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp; + uint32_t hsidiv; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_0: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + + case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */ + SystemCoreClock = LSI_VALUE; + break; + + case RCC_CFGR_SWS_2: /* LSE used as system clock */ + SystemCoreClock = LSE_VALUE; + break; + + case 0x00000000U: /* HSI used as system clock */ + default: /* HSI used as system clock */ + hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos)); + SystemCoreClock = (HSI_VALUE/hsidiv); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ From 8925892e2581969e65f4c025d7b28644d9f08b0e Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:38 +0100 Subject: [PATCH 04/23] system(C0): update STM32C0xx hal default config Signed-off-by: Frederic Pillon --- system/STM32C0xx/stm32c0xx_hal_conf_default.h | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/system/STM32C0xx/stm32c0xx_hal_conf_default.h b/system/STM32C0xx/stm32c0xx_hal_conf_default.h index ba22efb5bd..99e46af817 100644 --- a/system/STM32C0xx/stm32c0xx_hal_conf_default.h +++ b/system/STM32C0xx/stm32c0xx_hal_conf_default.h @@ -1,8 +1,7 @@ /** ****************************************************************************** - * @file stm32c0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration template file. + * @file stm32c0xx_hal_conf_default.h + * @brief HAL default configuration template file. * This file should be copied to the application folder and renamed * to stm32c0xx_hal_conf.h. ****************************************************************************** @@ -19,8 +18,8 @@ */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32C0xx_HAL_CONF_H -#define STM32C0xx_HAL_CONF_H +#ifndef STM32C0xx_HAL_CONF_DEFAULT_H +#define STM32C0xx_HAL_CONF_DEFAULT_H #ifdef __cplusplus extern "C" { @@ -30,6 +29,12 @@ extern "C" { /* Exported constants --------------------------------------------------------*/ /* ########################## Module Selection ############################## */ +/** + * @brief Include the default list of modules to be used in the HAL driver + * and manage module deactivation + */ +#include "stm32yyxx_hal_conf.h" +#if 0 /** * @brief This is the list of modules to be used in the HAL driver */ @@ -55,6 +60,7 @@ extern "C" { #define HAL_UART_MODULE_ENABLED #define HAL_USART_MODULE_ENABLED #define HAL_WWDG_MODULE_ENABLED +#endif /* ########################## Register Callbacks selection ############################## */ /** @@ -267,4 +273,4 @@ void assert_failed(uint8_t *file, uint32_t line); } #endif -#endif /* STM32C0xx_HAL_CONF_H */ +#endif /* STM32C0xx_HAL_CONF_DEFAULT_H */ From 8ae25ad8937cd7156130a4668107e532097fef79 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:38 +0100 Subject: [PATCH 05/23] core(C0): add top HAL include Signed-off-by: Frederic Pillon --- cores/arduino/stm32/stm32_def.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/cores/arduino/stm32/stm32_def.h b/cores/arduino/stm32/stm32_def.h index 143d58da0b..4ddb3dee5d 100644 --- a/cores/arduino/stm32/stm32_def.h +++ b/cores/arduino/stm32/stm32_def.h @@ -22,7 +22,9 @@ #define USE_HAL_DRIVER -#if defined(STM32F0xx) +#if defined(STM32C0xx) + #include "stm32c0xx.h" +#elif defined(STM32F0xx) #include "stm32f0xx.h" #elif defined(STM32F1xx) #include "stm32f1xx.h" From e1c6ddfe40d02dbbc2203e2e3aa34eb89b1afa2a Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:18:40 +0100 Subject: [PATCH 06/23] core(C0): add wrapped files Signed-off-by: Frederic Pillon --- cores/arduino/stm32/LL/stm32yyxx_ll_adc.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_bus.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_cortex.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_crc.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_dma.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_dmamux.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_exti.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_gpio.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_i2c.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_iwdg.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_pwr.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_rcc.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_rtc.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_spi.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_system.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_tim.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_usart.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_utils.h | 4 +++- cores/arduino/stm32/LL/stm32yyxx_ll_wwdg.h | 4 +++- cores/arduino/stm32/stm32_def_build.h | 6 +++++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_exti.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c | 4 +++- libraries/SrcWrapper/src/HAL/stm32yyxx_hal_wwdg.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_exti.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c | 4 +++- libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c | 4 +++- libraries/SrcWrapper/src/stm32/system_stm32yyxx.c | 4 +++- 70 files changed, 212 insertions(+), 70 deletions(-) diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_adc.h b/cores/arduino/stm32/LL/stm32yyxx_ll_adc.h index 3196ce89b3..89d19a5057 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_adc.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_adc.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_adc.h" +#elif STM32F0xx #include "stm32f0xx_ll_adc.h" #elif STM32F1xx #include "stm32f1xx_ll_adc.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_bus.h b/cores/arduino/stm32/LL/stm32yyxx_ll_bus.h index 010d20895a..b42e0d2206 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_bus.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_bus.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_bus.h" +#elif STM32F0xx #include "stm32f0xx_ll_bus.h" #elif STM32F1xx #include "stm32f1xx_ll_bus.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_cortex.h b/cores/arduino/stm32/LL/stm32yyxx_ll_cortex.h index 916b214678..e2ac7a89bc 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_cortex.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_cortex.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_cortex.h" +#elif STM32F0xx #include "stm32f0xx_ll_cortex.h" #elif STM32F1xx #include "stm32f1xx_ll_cortex.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_crc.h b/cores/arduino/stm32/LL/stm32yyxx_ll_crc.h index 3124571c26..918f5f6206 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_crc.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_crc.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_crc.h" +#elif STM32F0xx #include "stm32f0xx_ll_crc.h" #elif STM32F1xx #include "stm32f1xx_ll_crc.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_dma.h b/cores/arduino/stm32/LL/stm32yyxx_ll_dma.h index 8532133508..7bc7bf168c 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_dma.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_dma.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_dma.h" +#elif STM32F0xx #include "stm32f0xx_ll_dma.h" #elif STM32F1xx #include "stm32f1xx_ll_dma.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_dmamux.h b/cores/arduino/stm32/LL/stm32yyxx_ll_dmamux.h index d315b9b1a3..78cc071e08 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_dmamux.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_dmamux.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32G0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_dmamux.h" +#elif STM32G0xx #include "stm32g0xx_ll_dmamux.h" #elif STM32G4xx #include "stm32g4xx_ll_dmamux.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_exti.h b/cores/arduino/stm32/LL/stm32yyxx_ll_exti.h index 52b77f6a12..e7f789d676 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_exti.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_exti.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_exti.h" +#elif STM32F0xx #include "stm32f0xx_ll_exti.h" #elif STM32F1xx #include "stm32f1xx_ll_exti.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_gpio.h b/cores/arduino/stm32/LL/stm32yyxx_ll_gpio.h index 28e6d58687..a5f2e8a4c4 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_gpio.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_gpio.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_gpio.h" +#elif STM32F0xx #include "stm32f0xx_ll_gpio.h" #elif STM32F1xx #include "stm32f1xx_ll_gpio.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_i2c.h b/cores/arduino/stm32/LL/stm32yyxx_ll_i2c.h index 3524ed1bc5..aa71e4011d 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_i2c.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_i2c.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_i2c.h" +#elif STM32F0xx #include "stm32f0xx_ll_i2c.h" #elif STM32F1xx #include "stm32f1xx_ll_i2c.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_iwdg.h b/cores/arduino/stm32/LL/stm32yyxx_ll_iwdg.h index f19c2626d0..016e229c92 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_iwdg.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_iwdg.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_iwdg.h" +#elif STM32F0xx #include "stm32f0xx_ll_iwdg.h" #elif STM32F1xx #include "stm32f1xx_ll_iwdg.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_pwr.h b/cores/arduino/stm32/LL/stm32yyxx_ll_pwr.h index 8536223edc..fecb686d70 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_pwr.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_pwr.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_pwr.h" +#elif STM32F0xx #include "stm32f0xx_ll_pwr.h" #elif STM32F1xx #include "stm32f1xx_ll_pwr.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_rcc.h b/cores/arduino/stm32/LL/stm32yyxx_ll_rcc.h index d0c093dc58..74d3c69172 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_rcc.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_rcc.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_rcc.h" +#elif STM32F0xx #include "stm32f0xx_ll_rcc.h" #elif STM32F1xx #include "stm32f1xx_ll_rcc.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_rtc.h b/cores/arduino/stm32/LL/stm32yyxx_ll_rtc.h index 7d8890a0e5..2006e9184e 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_rtc.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_rtc.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_rtc.h" +#elif STM32F0xx #include "stm32f0xx_ll_rtc.h" #elif STM32F1xx #include "stm32f1xx_ll_rtc.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_spi.h b/cores/arduino/stm32/LL/stm32yyxx_ll_spi.h index d5e067cea3..2f8d37c5fd 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_spi.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_spi.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_spi.h" +#elif STM32F0xx #include "stm32f0xx_ll_spi.h" #elif STM32F1xx #include "stm32f1xx_ll_spi.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_system.h b/cores/arduino/stm32/LL/stm32yyxx_ll_system.h index 623185e69b..f4cc0f4153 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_system.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_system.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_system.h" +#elif STM32F0xx #include "stm32f0xx_ll_system.h" #elif STM32F1xx #include "stm32f1xx_ll_system.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_tim.h b/cores/arduino/stm32/LL/stm32yyxx_ll_tim.h index 8705a7b967..63fd1f148b 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_tim.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_tim.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_tim.h" +#elif STM32F0xx #include "stm32f0xx_ll_tim.h" #elif STM32F1xx #include "stm32f1xx_ll_tim.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_usart.h b/cores/arduino/stm32/LL/stm32yyxx_ll_usart.h index f4383d0a1f..202525e1fc 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_usart.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_usart.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_usart.h" +#elif STM32F0xx #include "stm32f0xx_ll_usart.h" #elif STM32F1xx #include "stm32f1xx_ll_usart.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_utils.h b/cores/arduino/stm32/LL/stm32yyxx_ll_utils.h index 1b445461af..5d95021604 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_utils.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_utils.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_utils.h" +#elif STM32F0xx #include "stm32f0xx_ll_utils.h" #elif STM32F1xx #include "stm32f1xx_ll_utils.h" diff --git a/cores/arduino/stm32/LL/stm32yyxx_ll_wwdg.h b/cores/arduino/stm32/LL/stm32yyxx_ll_wwdg.h index a9314c95e3..f3159380b2 100644 --- a/cores/arduino/stm32/LL/stm32yyxx_ll_wwdg.h +++ b/cores/arduino/stm32/LL/stm32yyxx_ll_wwdg.h @@ -5,7 +5,9 @@ #pragma GCC diagnostic ignored "-Wunused-parameter" #pragma GCC diagnostic ignored "-Wstrict-aliasing" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_wwdg.h" +#elif STM32F0xx #include "stm32f0xx_ll_wwdg.h" #elif STM32F1xx #include "stm32f1xx_ll_wwdg.h" diff --git a/cores/arduino/stm32/stm32_def_build.h b/cores/arduino/stm32/stm32_def_build.h index ce2d74b739..5eeeaef2f4 100644 --- a/cores/arduino/stm32/stm32_def_build.h +++ b/cores/arduino/stm32/stm32_def_build.h @@ -2,7 +2,11 @@ #define _STM32_DEF_BUILD_ #if !defined(CMSIS_STARTUP_FILE) && !defined(CUSTOM_STARTUP_FILE) - #if defined(STM32F030x6) + #if defined(STM32C011xx) + #define CMSIS_STARTUP_FILE "startup_stm32c011xx.s" + #elif defined(STM32C031xx) + #define CMSIS_STARTUP_FILE "startup_stm32c031xx.s" + #elif defined(STM32F030x6) #define CMSIS_STARTUP_FILE "startup_stm32f030x6.s" #elif defined(STM32F030x8) #define CMSIS_STARTUP_FILE "startup_stm32f030x8.s" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c index 4892485a8e..dff9d46e2d 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal.c" +#elif STM32F0xx #include "stm32f0xx_hal.c" #elif STM32F1xx #include "stm32f1xx_hal.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c index 2281e8580d..090b8903eb 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_adc.c" +#elif STM32F0xx #include "stm32f0xx_hal_adc.c" #elif STM32F1xx #include "stm32f1xx_hal_adc.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc_ex.c index 78c988fad6..859fddfe25 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_adc_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_adc_ex.c" #elif STM32F1xx #include "stm32f1xx_hal_adc_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c index eb45610248..063e9dea76 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_cortex.c" +#elif STM32F0xx #include "stm32f0xx_hal_cortex.c" #elif STM32F1xx #include "stm32f1xx_hal_cortex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c index 07c38bebf1..90ef5e4144 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_crc.c" +#elif STM32F0xx #include "stm32f0xx_hal_crc.c" #elif STM32F1xx #include "stm32f1xx_hal_crc.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c index 7ed7706e94..3940fea12e 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_crc_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_crc_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_crc_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c index 48ca0bc48a..e8a88625bd 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_dma.c" +#elif STM32F0xx #include "stm32f0xx_hal_dma.c" #elif STM32F1xx #include "stm32f1xx_hal_dma.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma_ex.c index 0202b3a8e7..9fc2812623 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F2xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_dma_ex.c" +#elif STM32F2xx #include "stm32f2xx_hal_dma_ex.c" #elif STM32F4xx #include "stm32f4xx_hal_dma_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_exti.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_exti.c index 1920aea0b7..2314f8f845 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_exti.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_exti.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_exti.c" +#elif STM32F0xx #include "stm32f0xx_hal_exti.c" #elif STM32F1xx #include "stm32f1xx_hal_exti.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c index f637a30730..09919ff970 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_flash.c" +#elif STM32F0xx #include "stm32f0xx_hal_flash.c" #elif STM32F1xx #include "stm32f1xx_hal_flash.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c index baa196aa04..4b39fc1d37 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_flash_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_flash_ex.c" #elif STM32F1xx #include "stm32f1xx_hal_flash_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c index 8637127343..39c75082b1 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_gpio.c" +#elif STM32F0xx #include "stm32f0xx_hal_gpio.c" #elif STM32F1xx #include "stm32f1xx_hal_gpio.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c index 64e5acc8e5..3e1dfe76b2 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_i2c.c" +#elif STM32F0xx #include "stm32f0xx_hal_i2c.c" #elif STM32F1xx #include "stm32f1xx_hal_i2c.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c index 004759dea7..a57b146187 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_i2c_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_i2c_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_i2c_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c index 55fdddbfbe..54d346cfef 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_i2s.c" +#elif STM32F0xx #include "stm32f0xx_hal_i2s.c" #elif STM32F1xx #include "stm32f1xx_hal_i2s.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c index 408ee7b4c9..14c6e7f3cf 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_irda.c" +#elif STM32F0xx #include "stm32f0xx_hal_irda.c" #elif STM32F1xx #include "stm32f1xx_hal_irda.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c index bdb4c01b8c..7efc51f38b 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_iwdg.c" +#elif STM32F0xx #include "stm32f0xx_hal_iwdg.c" #elif STM32F1xx #include "stm32f1xx_hal_iwdg.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c index 052be92f27..509ab24ffa 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_pwr.c" +#elif STM32F0xx #include "stm32f0xx_hal_pwr.c" #elif STM32F1xx #include "stm32f1xx_hal_pwr.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c index ef1845be41..bb6ee48db2 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_pwr_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_pwr_ex.c" #elif STM32F2xx #include "stm32f2xx_hal_pwr_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c index 287f96a9ff..12fd2468c2 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_rcc.c" +#elif STM32F0xx #include "stm32f0xx_hal_rcc.c" #elif STM32F1xx #include "stm32f1xx_hal_rcc.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c index 0794702d17..9d25bf60e9 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_rcc_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_rcc_ex.c" #elif STM32F1xx #include "stm32f1xx_hal_rcc_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c index c410d005a3..66499f5764 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_rtc.c" +#elif STM32F0xx #include "stm32f0xx_hal_rtc.c" #elif STM32F1xx #include "stm32f1xx_hal_rtc.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c index d7aadd54cc..654a8f56fd 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_rtc_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_rtc_ex.c" #elif STM32F1xx #include "stm32f1xx_hal_rtc_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c index 4c84164aeb..98a443708b 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_smartcard.c" +#elif STM32F0xx #include "stm32f0xx_hal_smartcard.c" #elif STM32F1xx #include "stm32f1xx_hal_smartcard.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c index 0cafe20302..5c49fbdf58 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_smartcard_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_smartcard_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_smartcard_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c index 823b55bdce..f37b89671a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_smbus.c" +#elif STM32F0xx #include "stm32f0xx_hal_smbus.c" #elif STM32F3xx #include "stm32f3xx_hal_smbus.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c index 05b85a93b8..b37baba397 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32G0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_smbus_ex.c" +#elif STM32G0xx #include "stm32g0xx_hal_smbus_ex.c" #elif STM32G4xx #include "stm32g4xx_hal_smbus_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c index 657beff313..7efe9f7b65 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_spi.c" +#elif STM32F0xx #include "stm32f0xx_hal_spi.c" #elif STM32F1xx #include "stm32f1xx_hal_spi.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c index c384b7d150..3f82f33ab3 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_spi_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_spi_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_spi_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c index b0e026e746..6e9b38e53a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_tim.c" +#elif STM32F0xx #include "stm32f0xx_hal_tim.c" #elif STM32F1xx #include "stm32f1xx_hal_tim.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c index c7c7596b36..7a4a6112e6 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_tim_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_tim_ex.c" #elif STM32F1xx #include "stm32f1xx_hal_tim_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c index d042464208..3ad369e2f4 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_uart.c" +#elif STM32F0xx #include "stm32f0xx_hal_uart.c" #elif STM32F1xx #include "stm32f1xx_hal_uart.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c index c28755db69..f9923dbc55 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_uart_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_uart_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_uart_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c index e0a6896986..b95b7e000e 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_usart.c" +#elif STM32F0xx #include "stm32f0xx_hal_usart.c" #elif STM32F1xx #include "stm32f1xx_hal_usart.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c index 45bc27874e..0692a90390 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_usart_ex.c" +#elif STM32F0xx #include "stm32f0xx_hal_usart_ex.c" #elif STM32F3xx #include "stm32f3xx_hal_usart_ex.c" diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_wwdg.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_wwdg.c index 0f625667dd..dfa2d2a602 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_wwdg.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_wwdg.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_hal_wwdg.c" +#elif STM32F0xx #include "stm32f0xx_hal_wwdg.c" #elif STM32F1xx #include "stm32f1xx_hal_wwdg.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c index f0489a2179..e3f19830e3 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_adc.c" +#elif STM32F0xx #include "stm32f0xx_ll_adc.c" #elif STM32F1xx #include "stm32f1xx_ll_adc.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c index 571fe8181b..52f7d7fc21 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_crc.c" +#elif STM32F0xx #include "stm32f0xx_ll_crc.c" #elif STM32F1xx #include "stm32f1xx_ll_crc.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c index 8d83697c9b..145d3f6075 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_dma.c" +#elif STM32F0xx #include "stm32f0xx_ll_dma.c" #elif STM32F1xx #include "stm32f1xx_ll_dma.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_exti.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_exti.c index d0c35b5c98..750f6fe193 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_exti.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_exti.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_exti.c" +#elif STM32F0xx #include "stm32f0xx_ll_exti.c" #elif STM32F1xx #include "stm32f1xx_ll_exti.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c index c677a9f347..d24eb63a9a 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_gpio.c" +#elif STM32F0xx #include "stm32f0xx_ll_gpio.c" #elif STM32F1xx #include "stm32f1xx_ll_gpio.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c index 3197561533..9f898fbdb7 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_i2c.c" +#elif STM32F0xx #include "stm32f0xx_ll_i2c.c" #elif STM32F1xx #include "stm32f1xx_ll_i2c.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c index f9ca829341..90cb4e3e50 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_pwr.c" +#elif STM32F0xx #include "stm32f0xx_ll_pwr.c" #elif STM32F1xx #include "stm32f1xx_ll_pwr.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c index 46b7607d23..4c41130343 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_rcc.c" +#elif STM32F0xx #include "stm32f0xx_ll_rcc.c" #elif STM32F1xx #include "stm32f1xx_ll_rcc.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c index ec647137ed..f545a4c02c 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_rtc.c" +#elif STM32F0xx #include "stm32f0xx_ll_rtc.c" #elif STM32F1xx #include "stm32f1xx_ll_rtc.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c index 5ee776bc46..8867f410d8 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_spi.c" +#elif STM32F0xx #include "stm32f0xx_ll_spi.c" #elif STM32F1xx #include "stm32f1xx_ll_spi.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c index fec444c93a..d9eb913802 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_tim.c" +#elif STM32F0xx #include "stm32f0xx_ll_tim.c" #elif STM32F1xx #include "stm32f1xx_ll_tim.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c index b3f8660ce2..4ff054c580 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_usart.c" +#elif STM32F0xx #include "stm32f0xx_ll_usart.c" #elif STM32F1xx #include "stm32f1xx_ll_usart.c" diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c index 7501dc731c..56dd17ea2f 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c @@ -2,7 +2,9 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "stm32c0xx_ll_utils.c" +#elif STM32F0xx #include "stm32f0xx_ll_utils.c" #elif STM32F1xx #include "stm32f1xx_ll_utils.c" diff --git a/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c b/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c index e21d8c5110..1ca7f7aaeb 100644 --- a/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c +++ b/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c @@ -1,6 +1,8 @@ #define USE_HAL_DRIVER -#ifdef STM32F0xx +#ifdef STM32C0xx + #include "system_stm32c0xx.c" +#elif STM32F0xx #include "system_stm32f0xx.c" #elif STM32F1xx #include "system_stm32f1xx.c" From 84c80bd936ba44f0d8320b4ad42be4c697b25126 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:28:21 +0100 Subject: [PATCH 07/23] system(C0): update STM32C0xx hal default config Allow some redefinition. Signed-off-by: Frederic Pillon --- system/STM32C0xx/stm32c0xx_hal_conf_default.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/system/STM32C0xx/stm32c0xx_hal_conf_default.h b/system/STM32C0xx/stm32c0xx_hal_conf_default.h index 99e46af817..2730a106bc 100644 --- a/system/STM32C0xx/stm32c0xx_hal_conf_default.h +++ b/system/STM32C0xx/stm32c0xx_hal_conf_default.h @@ -148,11 +148,21 @@ in voltage and temperature.*/ /** * @brief This is the HAL system configuration section */ +#if !defined (VDD_VALUE) #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#endif +#if !defined (TICK_INT_PRIORITY) #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ +#endif +#if !defined (USE_RTOS) #define USE_RTOS 0U +#endif +#if !defined (PREFETCH_ENABLE) #define PREFETCH_ENABLE 1U +#endif +#if !defined (INSTRUCTION_CACHE_ENABLE) #define INSTRUCTION_CACHE_ENABLE 1U +#endif /* ########################## Assert Selection ############################## */ From b0dceed12ecf272fedc1c4262449fa0f82369856 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Wed, 27 Oct 2021 16:54:43 +0200 Subject: [PATCH 08/23] system(C0): update STM32C0xx system Remove duplicate clock definition. Allow VECT_TAB_OFFSET redefinition. Signed-off-by: Frederic Pillon --- system/STM32C0xx/system_stm32c0xx.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/system/STM32C0xx/system_stm32c0xx.c b/system/STM32C0xx/system_stm32c0xx.c index f0e137f151..194f60d018 100644 --- a/system/STM32C0xx/system_stm32c0xx.c +++ b/system/STM32C0xx/system_stm32c0xx.c @@ -45,22 +45,6 @@ #include "stm32c0xx.h" -#if !defined (HSE_VALUE) -#define HSE_VALUE (48000000UL) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE (48000000UL) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ -#endif /* LSI_VALUE */ - -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ -#endif /* LSE_VALUE */ - /** * @} */ @@ -81,8 +65,10 @@ /*!< Uncomment the following line if you need to relocate your vector Table in Internal SRAM. */ //#define VECT_TAB_SRAM +#ifndef VECT_TAB_OFFSET #define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field. This value must be a multiple of 0x100. */ +#endif /******************************************************************************/ /** * @} From 6426bf4c83b8fdcdaf3c017f87491000839a7b23 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 20 Jan 2023 11:32:50 +0100 Subject: [PATCH 09/23] variants(C0): add all generated STM32C0xx generic variant files Signed-off-by: Frederic Pillon --- .../PeripheralPins.c | 228 ++++++++++++++ .../PinNamesVar.h | 59 ++++ .../boards_entry.txt | 61 ++++ .../generic_clock.c | 30 ++ .../variant_generic.cpp | 60 ++++ .../variant_generic.h | 161 ++++++++++ .../STM32C0xx/C011J(4-6)M/PeripheralPins.c | 202 +++++++++++++ variants/STM32C0xx/C011J(4-6)M/PinNamesVar.h | 51 ++++ .../STM32C0xx/C011J(4-6)M/boards_entry.txt | 21 ++ .../STM32C0xx/C011J(4-6)M/generic_clock.c | 27 ++ .../STM32C0xx/C011J(4-6)M/variant_generic.cpp | 47 +++ .../STM32C0xx/C011J(4-6)M/variant_generic.h | 148 +++++++++ .../C031C(4-6)(T-U)/PeripheralPins.c | 280 ++++++++++++++++++ .../STM32C0xx/C031C(4-6)(T-U)/PinNamesVar.h | 67 +++++ .../C031C(4-6)(T-U)/boards_entry.txt | 37 +++ .../STM32C0xx/C031C(4-6)(T-U)/generic_clock.c | 28 ++ .../C031C(4-6)(T-U)/variant_generic.cpp | 91 ++++++ .../C031C(4-6)(T-U)/variant_generic.h | 196 ++++++++++++ .../STM32C0xx/C031G(4-6)U/PeripheralPins.c | 255 ++++++++++++++++ variants/STM32C0xx/C031G(4-6)U/PinNamesVar.h | 66 +++++ .../STM32C0xx/C031G(4-6)U/boards_entry.txt | 21 ++ .../STM32C0xx/C031G(4-6)U/generic_clock.c | 27 ++ .../STM32C0xx/C031G(4-6)U/variant_generic.cpp | 67 +++++ .../STM32C0xx/C031G(4-6)U/variant_generic.h | 176 +++++++++++ .../C031K(4-6)(T-U)/PeripheralPins.c | 267 +++++++++++++++++ .../STM32C0xx/C031K(4-6)(T-U)/PinNamesVar.h | 67 +++++ .../C031K(4-6)(T-U)/boards_entry.txt | 37 +++ .../STM32C0xx/C031K(4-6)(T-U)/generic_clock.c | 28 ++ .../C031K(4-6)(T-U)/variant_generic.cpp | 73 +++++ .../C031K(4-6)(T-U)/variant_generic.h | 181 +++++++++++ 30 files changed, 3059 insertions(+) create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PinNamesVar.h create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/boards_entry.txt create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.cpp create mode 100644 variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.h create mode 100644 variants/STM32C0xx/C011J(4-6)M/PeripheralPins.c create mode 100644 variants/STM32C0xx/C011J(4-6)M/PinNamesVar.h create mode 100644 variants/STM32C0xx/C011J(4-6)M/boards_entry.txt create mode 100644 variants/STM32C0xx/C011J(4-6)M/generic_clock.c create mode 100644 variants/STM32C0xx/C011J(4-6)M/variant_generic.cpp create mode 100644 variants/STM32C0xx/C011J(4-6)M/variant_generic.h create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/PeripheralPins.c create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/PinNamesVar.h create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/boards_entry.txt create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.cpp create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.h create mode 100644 variants/STM32C0xx/C031G(4-6)U/PeripheralPins.c create mode 100644 variants/STM32C0xx/C031G(4-6)U/PinNamesVar.h create mode 100644 variants/STM32C0xx/C031G(4-6)U/boards_entry.txt create mode 100644 variants/STM32C0xx/C031G(4-6)U/generic_clock.c create mode 100644 variants/STM32C0xx/C031G(4-6)U/variant_generic.cpp create mode 100644 variants/STM32C0xx/C031G(4-6)U/variant_generic.h create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/PeripheralPins.c create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/PinNamesVar.h create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/boards_entry.txt create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/generic_clock.c create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.cpp create mode 100644 variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.h diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c new file mode 100644 index 0000000000..34db234d9d --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PeripheralPins.c @@ -0,0 +1,228 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32C011D6Yx.xml, STM32C011F(4-6)Px.xml + * STM32C011F(4-6)Ux.xml, STM32C031F(4-6)Px.xml + * CubeMX DB release 6.0.70 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2 + {PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_3_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 4, 0)}, // TIM1_CH4 + {PA_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PA_4_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_4_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 1)}, // TIM17_CH1N + {PA_5, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_5_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N + {PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N + {PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3 + {PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4 + {PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2 + {PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1 + {PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1 + {PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1 + {PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, + {PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PinNamesVar.h b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PinNamesVar.h new file mode 100644 index 0000000000..279477859b --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/PinNamesVar.h @@ -0,0 +1,59 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_0_ALT1 = PA_0 | ALT1, +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, +PA_4_ALT1 = PA_4 | ALT1, +PA_4_ALT2 = PA_4 | ALT2, +PA_5_ALT1 = PA_5 | ALT1, +PA_6_ALT1 = PA_6 | ALT1, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PA_7_ALT3 = PA_7 | ALT3, +PA_8_ALT1 = PA_8 | ALT1, +PA_8_ALT2 = PA_8 | ALT2, +PA_8_ALT3 = PA_8 | ALT3, +PA_8_ALT4 = PA_8 | ALT4, +PA_8_ALT5 = PA_8 | ALT5, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_6_ALT3 = PB_6 | ALT3, +PB_6_ALT4 = PB_6 | ALT4, +PB_6_ALT5 = PB_6 | ALT5, +PB_7_ALT1 = PB_7 | ALT1, +PB_7_ALT2 = PB_7 | ALT2, +PB_7_ALT3 = PB_7 | ALT3, +PB_7_ALT4 = PB_7 | ALT4, +PC_14_ALT1 = PC_14 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PA_4, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_6, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* No USB */ diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/boards_entry.txt b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/boards_entry.txt new file mode 100644 index 0000000000..b22cab3ba3 --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/boards_entry.txt @@ -0,0 +1,61 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 + +# Generic C011D6Yx +GenC0.menu.pnum.GENERIC_C011D6YX=Generic C011D6Yx +GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011D6YX.build.board=GENERIC_C011D6YX +GenC0.menu.pnum.GENERIC_C011D6YX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011D6YX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C011F4Px +GenC0.menu.pnum.GENERIC_C011F4PX=Generic C011F4Px +GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011F4PX.build.board=GENERIC_C011F4PX +GenC0.menu.pnum.GENERIC_C011F4PX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C011F6Px +GenC0.menu.pnum.GENERIC_C011F6PX=Generic C011F6Px +GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011F6PX.build.board=GENERIC_C011F6PX +GenC0.menu.pnum.GENERIC_C011F6PX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C011F4Ux +GenC0.menu.pnum.GENERIC_C011F4UX=Generic C011F4Ux +GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011F4UX.build.board=GENERIC_C011F4UX +GenC0.menu.pnum.GENERIC_C011F4UX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011F4UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C011F6Ux +GenC0.menu.pnum.GENERIC_C011F6UX=Generic C011F6Ux +GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011F6UX.build.board=GENERIC_C011F6UX +GenC0.menu.pnum.GENERIC_C011F6UX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011F6UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C031F4Px +GenC0.menu.pnum.GENERIC_C031F4PX=Generic C031F4Px +GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031F4PX.build.board=GENERIC_C031F4PX +GenC0.menu.pnum.GENERIC_C031F4PX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + +# Generic C031F6Px +GenC0.menu.pnum.GENERIC_C031F6PX=Generic C031F6Px +GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031F6PX.build.board=GENERIC_C031F6PX +GenC0.menu.pnum.GENERIC_C031F6PX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P + diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c new file mode 100644 index 0000000000..93cb896aa0 --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c @@ -0,0 +1,30 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C011D6YX) || defined(ARDUINO_GENERIC_C011F4PX) ||\ + defined(ARDUINO_GENERIC_C011F4UX) || defined(ARDUINO_GENERIC_C011F6PX) ||\ + defined(ARDUINO_GENERIC_C011F6UX) || defined(ARDUINO_GENERIC_C031F4PX) ||\ + defined(ARDUINO_GENERIC_C031F6PX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.cpp b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.cpp new file mode 100644 index 0000000000..b876310983 --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.cpp @@ -0,0 +1,60 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C011D6YX) || defined(ARDUINO_GENERIC_C011F4PX) ||\ + defined(ARDUINO_GENERIC_C011F4UX) || defined(ARDUINO_GENERIC_C011F6PX) ||\ + defined(ARDUINO_GENERIC_C011F6UX) || defined(ARDUINO_GENERIC_C031F4PX) ||\ + defined(ARDUINO_GENERIC_C031F6PX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_3, // D3/A3 + PA_4, // D4/A4 + PA_5, // D5/A5 + PA_6, // D6/A6 + PA_7, // D7/A7 + PA_8, // D8/A8 + PA_11, // D9/A9 + PA_12, // D10/A10 + PA_13, // D11/A11 + PA_14, // D12/A12 + PB_6, // D13 + PB_7, // D14 + PC_14, // D15 + PC_15, // D16 + PF_2, // D17 + PA_9_R, // D18 + PA_10_R // D19 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 8, // A8, PA8 + 9, // A9, PA11 + 10, // A10, PA12 + 11, // A11, PA13 + 12 // A12, PA14 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.h b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.h new file mode 100644 index 0000000000..19778f9b5b --- /dev/null +++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/variant_generic.h @@ -0,0 +1,161 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PA8 PIN_A8 +#define PA11 PIN_A9 +#define PA12 PIN_A10 +#define PA13 PIN_A11 +#define PA14 PIN_A12 +#define PB6 13 +#define PB7 14 +#define PC14 15 +#define PC15 16 +#define PF2 17 +#define PA9_R 18 +#define PA10_R 19 + +// Alternate pins number +#define PA0_ALT1 (PA0 | ALT1) +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA4_ALT2 (PA4 | ALT2) +#define PA5_ALT1 (PA5 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA8_ALT1 (PA8 | ALT1) +#define PA8_ALT2 (PA8 | ALT2) +#define PA8_ALT3 (PA8 | ALT3) +#define PA8_ALT4 (PA8 | ALT4) +#define PA8_ALT5 (PA8 | ALT5) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB6_ALT3 (PB6 | ALT3) +#define PB6_ALT4 (PB6 | ALT4) +#define PB6_ALT5 (PB6 | ALT5) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB7_ALT3 (PB7 | ALT3) +#define PB7_ALT4 (PB7 | ALT4) +#define PC14_ALT1 (PC14 | ALT1) + +#define NUM_DIGITAL_PINS 20 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 13 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA8 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PA14 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10_R +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9_R +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32C0xx/C011J(4-6)M/PeripheralPins.c b/variants/STM32C0xx/C011J(4-6)M/PeripheralPins.c new file mode 100644 index 0000000000..f2e67f0580 --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/PeripheralPins.c @@ -0,0 +1,202 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32C011J(4-6)Mx.xml + * CubeMX DB release 6.0.70 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2 + {PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N + {PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N + {PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3 + {PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4 + {PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2 + {PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1 + {PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1 + {PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1 + {PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, + {PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32C0xx/C011J(4-6)M/PinNamesVar.h b/variants/STM32C0xx/C011J(4-6)M/PinNamesVar.h new file mode 100644 index 0000000000..1bc0a76082 --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/PinNamesVar.h @@ -0,0 +1,51 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_0_ALT1 = PA_0 | ALT1, +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_8_ALT1 = PA_8 | ALT1, +PA_8_ALT2 = PA_8 | ALT2, +PA_8_ALT3 = PA_8 | ALT3, +PA_8_ALT4 = PA_8 | ALT4, +PA_8_ALT5 = PA_8 | ALT5, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_6_ALT3 = PB_6 | ALT3, +PB_6_ALT4 = PB_6 | ALT4, +PB_6_ALT5 = PB_6 | ALT5, +PB_7_ALT1 = PB_7 | ALT1, +PB_7_ALT2 = PB_7 | ALT2, +PB_7_ALT3 = PB_7 | ALT3, +PB_7_ALT4 = PB_7 | ALT4, +PC_14_ALT1 = PC_14 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = NC, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_6, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* No USB */ diff --git a/variants/STM32C0xx/C011J(4-6)M/boards_entry.txt b/variants/STM32C0xx/C011J(4-6)M/boards_entry.txt new file mode 100644 index 0000000000..b0bef3c69a --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/boards_entry.txt @@ -0,0 +1,21 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 + +# Generic C011J4Mx +GenC0.menu.pnum.GENERIC_C011J4MX=Generic C011J4Mx +GenC0.menu.pnum.GENERIC_C011J4MX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C011J4MX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011J4MX.build.board=GENERIC_C011J4MX +GenC0.menu.pnum.GENERIC_C011J4MX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011J4MX.build.variant=STM32C0xx/C011J(4-6)M + +# Generic C011J6Mx +GenC0.menu.pnum.GENERIC_C011J6MX=Generic C011J6Mx +GenC0.menu.pnum.GENERIC_C011J6MX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C011J6MX.upload.maximum_data_size=6144 +GenC0.menu.pnum.GENERIC_C011J6MX.build.board=GENERIC_C011J6MX +GenC0.menu.pnum.GENERIC_C011J6MX.build.product_line=STM32C011xx +GenC0.menu.pnum.GENERIC_C011J6MX.build.variant=STM32C0xx/C011J(4-6)M + diff --git a/variants/STM32C0xx/C011J(4-6)M/generic_clock.c b/variants/STM32C0xx/C011J(4-6)M/generic_clock.c new file mode 100644 index 0000000000..b8c94ff32c --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/generic_clock.c @@ -0,0 +1,27 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C011J4MX) || defined(ARDUINO_GENERIC_C011J6MX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C011J(4-6)M/variant_generic.cpp b/variants/STM32C0xx/C011J(4-6)M/variant_generic.cpp new file mode 100644 index 0000000000..145be0ff92 --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/variant_generic.cpp @@ -0,0 +1,47 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C011J4MX) || defined(ARDUINO_GENERIC_C011J6MX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_8, // D3/A3 + PA_11, // D4/A4 + PA_12, // D5/A5 + PA_13, // D6/A6 + PA_14, // D7/A7 + PB_6, // D8 + PB_7, // D9 + PC_14, // D10 + PC_15, // D11 + PF_2, // D12 + PA_9_R, // D13 + PA_10_R // D14 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA8 + 4, // A4, PA11 + 5, // A5, PA12 + 6, // A6, PA13 + 7 // A7, PA14 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C011J(4-6)M/variant_generic.h b/variants/STM32C0xx/C011J(4-6)M/variant_generic.h new file mode 100644 index 0000000000..d07da3866b --- /dev/null +++ b/variants/STM32C0xx/C011J(4-6)M/variant_generic.h @@ -0,0 +1,148 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA8 PIN_A3 +#define PA11 PIN_A4 +#define PA12 PIN_A5 +#define PA13 PIN_A6 +#define PA14 PIN_A7 +#define PB6 8 +#define PB7 9 +#define PC14 10 +#define PC15 11 +#define PF2 12 +#define PA9_R 13 +#define PA10_R 14 + +// Alternate pins number +#define PA0_ALT1 (PA0 | ALT1) +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA8_ALT1 (PA8 | ALT1) +#define PA8_ALT2 (PA8 | ALT2) +#define PA8_ALT3 (PA8 | ALT3) +#define PA8_ALT4 (PA8 | ALT4) +#define PA8_ALT5 (PA8 | ALT5) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB6_ALT3 (PB6 | ALT3) +#define PB6_ALT4 (PB6 | ALT4) +#define PB6_ALT5 (PB6 | ALT5) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB7_ALT3 (PB7 | ALT3) +#define PB7_ALT4 (PB7 | ALT4) +#define PC14_ALT1 (PC14 | ALT1) + +#define NUM_DIGITAL_PINS 15 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 8 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA8 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA14 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA11 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10_R +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9_R +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/PeripheralPins.c b/variants/STM32C0xx/C031C(4-6)(T-U)/PeripheralPins.c new file mode 100644 index 0000000000..5c2cd13428 --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/PeripheralPins.c @@ -0,0 +1,280 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32C031C(4-6)Tx.xml, STM32C031C(4-6)Ux.xml + * CubeMX DB release 6.0.70 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18 + {PB_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_IN19 + {PB_10, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 20, 0)}, // ADC1_IN20 + {PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 21, 0)}, // ADC1_IN21 + {PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 22, 0)}, // ADC1_IN22 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2 + {PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_3_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 4, 0)}, // TIM1_CH4 + {PA_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PA_4_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_4_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 1)}, // TIM17_CH1N + {PA_5, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_5_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N + {PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N + {PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3 + {PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4 + {PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1 + {PA_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 1)}, // TIM1_CH2N + {PB_1_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT3, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PB_3_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 2, 0)}, // TIM3_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_5_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2 + {PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1 + {PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1 + {PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1 + {PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 1, 0)}, // TIM3_CH1 + {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 2, 0)}, // TIM3_CH2 + {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PD_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PD_1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PD_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PD_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PF_0, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM14, 1, 0)}, // TIM14_CH1 + {PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_9, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, + {PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PB_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/PinNamesVar.h b/variants/STM32C0xx/C031C(4-6)(T-U)/PinNamesVar.h new file mode 100644 index 0000000000..c0e6b7b4dd --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/PinNamesVar.h @@ -0,0 +1,67 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_0_ALT1 = PA_0 | ALT1, +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, +PA_4_ALT1 = PA_4 | ALT1, +PA_4_ALT2 = PA_4 | ALT2, +PA_5_ALT1 = PA_5 | ALT1, +PA_6_ALT1 = PA_6 | ALT1, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PA_7_ALT3 = PA_7 | ALT3, +PA_8_ALT1 = PA_8 | ALT1, +PA_8_ALT2 = PA_8 | ALT2, +PA_8_ALT3 = PA_8 | ALT3, +PA_8_ALT4 = PA_8 | ALT4, +PA_8_ALT5 = PA_8 | ALT5, +PB_0_ALT1 = PB_0 | ALT1, +PB_1_ALT1 = PB_1 | ALT1, +PB_1_ALT2 = PB_1 | ALT2, +PB_1_ALT3 = PB_1 | ALT3, +PB_3_ALT1 = PB_3 | ALT1, +PB_5_ALT1 = PB_5 | ALT1, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_6_ALT3 = PB_6 | ALT3, +PB_6_ALT4 = PB_6 | ALT4, +PB_6_ALT5 = PB_6 | ALT5, +PB_7_ALT1 = PB_7 | ALT1, +PB_7_ALT2 = PB_7 | ALT2, +PB_7_ALT3 = PB_7 | ALT3, +PB_7_ALT4 = PB_7 | ALT4, +PB_8_ALT1 = PB_8 | ALT1, +PB_9_ALT1 = PB_9 | ALT1, +PC_14_ALT1 = PC_14 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PC_13, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_6, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* No USB */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/boards_entry.txt b/variants/STM32C0xx/C031C(4-6)(T-U)/boards_entry.txt new file mode 100644 index 0000000000..c6bf809359 --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/boards_entry.txt @@ -0,0 +1,37 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 + +# Generic C031C4Tx +GenC0.menu.pnum.GENERIC_C031C4TX=Generic C031C4Tx +GenC0.menu.pnum.GENERIC_C031C4TX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031C4TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C4TX.build.board=GENERIC_C031C4TX +GenC0.menu.pnum.GENERIC_C031C4TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C4TX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C6Tx +GenC0.menu.pnum.GENERIC_C031C6TX=Generic C031C6Tx +GenC0.menu.pnum.GENERIC_C031C6TX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031C6TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C6TX.build.board=GENERIC_C031C6TX +GenC0.menu.pnum.GENERIC_C031C6TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C6TX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C4Ux +GenC0.menu.pnum.GENERIC_C031C4UX=Generic C031C4Ux +GenC0.menu.pnum.GENERIC_C031C4UX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031C4UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C4UX.build.board=GENERIC_C031C4UX +GenC0.menu.pnum.GENERIC_C031C4UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C4UX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C6Ux +GenC0.menu.pnum.GENERIC_C031C6UX=Generic C031C6Ux +GenC0.menu.pnum.GENERIC_C031C6UX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031C6UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C6UX.build.board=GENERIC_C031C6UX +GenC0.menu.pnum.GENERIC_C031C6UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C6UX.build.variant=STM32C0xx/C031C(4-6)(T-U) + diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c b/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c new file mode 100644 index 0000000000..969012090a --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c @@ -0,0 +1,28 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031C4TX) || defined(ARDUINO_GENERIC_C031C4UX) ||\ + defined(ARDUINO_GENERIC_C031C6TX) || defined(ARDUINO_GENERIC_C031C6UX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.cpp b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.cpp new file mode 100644 index 0000000000..3d09a13a2b --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.cpp @@ -0,0 +1,91 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031C4TX) || defined(ARDUINO_GENERIC_C031C4UX) ||\ + defined(ARDUINO_GENERIC_C031C6TX) || defined(ARDUINO_GENERIC_C031C6UX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_3, // D3/A3 + PA_4, // D4/A4 + PA_5, // D5/A5 + PA_6, // D6/A6 + PA_7, // D7/A7 + PA_8, // D8/A8 + PA_9, // D9 + PA_10, // D10 + PA_11, // D11/A9 + PA_12, // D12/A10 + PA_13, // D13/A11 + PA_14, // D14/A12 + PA_15, // D15 + PB_0, // D16/A13 + PB_1, // D17/A14 + PB_2, // D18/A15 + PB_3, // D19 + PB_4, // D20 + PB_5, // D21 + PB_6, // D22 + PB_7, // D23 + PB_8, // D24 + PB_9, // D25 + PB_10, // D26/A16 + PB_11, // D27/A17 + PB_12, // D28/A18 + PB_13, // D29 + PB_14, // D30 + PB_15, // D31 + PC_6, // D32 + PC_7, // D33 + PC_13, // D34 + PC_14, // D35 + PC_15, // D36 + PD_0, // D37 + PD_1, // D38 + PD_2, // D39 + PD_3, // D40 + PF_0, // D41 + PF_1, // D42 + PF_2, // D43 + PF_3, // D44 + PA_9_R, // D45 + PA_10_R // D46 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 8, // A8, PA8 + 11, // A9, PA11 + 12, // A10, PA12 + 13, // A11, PA13 + 14, // A12, PA14 + 16, // A13, PB0 + 17, // A14, PB1 + 18, // A15, PB2 + 26, // A16, PB10 + 27, // A17, PB11 + 28 // A18, PB12 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.h b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.h new file mode 100644 index 0000000000..190d78145c --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_generic.h @@ -0,0 +1,196 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PA8 PIN_A8 +#define PA9 9 +#define PA10 10 +#define PA11 PIN_A9 +#define PA12 PIN_A10 +#define PA13 PIN_A11 +#define PA14 PIN_A12 +#define PA15 15 +#define PB0 PIN_A13 +#define PB1 PIN_A14 +#define PB2 PIN_A15 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 PIN_A16 +#define PB11 PIN_A17 +#define PB12 PIN_A18 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC6 32 +#define PC7 33 +#define PC13 34 +#define PC14 35 +#define PC15 36 +#define PD0 37 +#define PD1 38 +#define PD2 39 +#define PD3 40 +#define PF0 41 +#define PF1 42 +#define PF2 43 +#define PF3 44 +#define PA9_R 45 +#define PA10_R 46 + +// Alternate pins number +#define PA0_ALT1 (PA0 | ALT1) +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA4_ALT2 (PA4 | ALT2) +#define PA5_ALT1 (PA5 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA8_ALT1 (PA8 | ALT1) +#define PA8_ALT2 (PA8 | ALT2) +#define PA8_ALT3 (PA8 | ALT3) +#define PA8_ALT4 (PA8 | ALT4) +#define PA8_ALT5 (PA8 | ALT5) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB1_ALT3 (PB1 | ALT3) +#define PB3_ALT1 (PB3 | ALT1) +#define PB5_ALT1 (PB5 | ALT1) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB6_ALT3 (PB6 | ALT3) +#define PB6_ALT4 (PB6 | ALT4) +#define PB6_ALT5 (PB6 | ALT5) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB7_ALT3 (PB7 | ALT3) +#define PB7_ALT4 (PB7 | ALT4) +#define PB8_ALT1 (PB8 | ALT1) +#define PB9_ALT1 (PB9 | ALT1) +#define PC14_ALT1 (PC14 | ALT1) + +#define NUM_DIGITAL_PINS 47 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 19 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA8 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PA14 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PA15 +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32C0xx/C031G(4-6)U/PeripheralPins.c b/variants/STM32C0xx/C031G(4-6)U/PeripheralPins.c new file mode 100644 index 0000000000..390aa8f5b8 --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/PeripheralPins.c @@ -0,0 +1,255 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32C031G(4-6)Ux.xml + * CubeMX DB release 6.0.70 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2 + {PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_3_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 4, 0)}, // TIM1_CH4 + {PA_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PA_4_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_4_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 1)}, // TIM17_CH1N + {PA_5, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_5_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N + {PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N + {PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3 + {PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4 + {PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1 + {PA_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 1)}, // TIM1_CH2N + {PB_1_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT3, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PB_3_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 2, 0)}, // TIM3_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_5_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2 + {PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1 + {PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1 + {PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1 + {PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 1, 0)}, // TIM3_CH1 + {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, + {PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PB_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32C0xx/C031G(4-6)U/PinNamesVar.h b/variants/STM32C0xx/C031G(4-6)U/PinNamesVar.h new file mode 100644 index 0000000000..41eb088e9c --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/PinNamesVar.h @@ -0,0 +1,66 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_0_ALT1 = PA_0 | ALT1, +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, +PA_4_ALT1 = PA_4 | ALT1, +PA_4_ALT2 = PA_4 | ALT2, +PA_5_ALT1 = PA_5 | ALT1, +PA_6_ALT1 = PA_6 | ALT1, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PA_7_ALT3 = PA_7 | ALT3, +PA_8_ALT1 = PA_8 | ALT1, +PA_8_ALT2 = PA_8 | ALT2, +PA_8_ALT3 = PA_8 | ALT3, +PA_8_ALT4 = PA_8 | ALT4, +PA_8_ALT5 = PA_8 | ALT5, +PB_0_ALT1 = PB_0 | ALT1, +PB_1_ALT1 = PB_1 | ALT1, +PB_1_ALT2 = PB_1 | ALT2, +PB_1_ALT3 = PB_1 | ALT3, +PB_3_ALT1 = PB_3 | ALT1, +PB_5_ALT1 = PB_5 | ALT1, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_6_ALT3 = PB_6 | ALT3, +PB_6_ALT4 = PB_6 | ALT4, +PB_6_ALT5 = PB_6 | ALT5, +PB_7_ALT1 = PB_7 | ALT1, +PB_7_ALT2 = PB_7 | ALT2, +PB_7_ALT3 = PB_7 | ALT3, +PB_7_ALT4 = PB_7 | ALT4, +PB_8_ALT1 = PB_8 | ALT1, +PC_14_ALT1 = PC_14 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PA_4, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_6, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* No USB */ diff --git a/variants/STM32C0xx/C031G(4-6)U/boards_entry.txt b/variants/STM32C0xx/C031G(4-6)U/boards_entry.txt new file mode 100644 index 0000000000..3028fb1e7a --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/boards_entry.txt @@ -0,0 +1,21 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 + +# Generic C031G4Ux +GenC0.menu.pnum.GENERIC_C031G4UX=Generic C031G4Ux +GenC0.menu.pnum.GENERIC_C031G4UX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031G4UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031G4UX.build.board=GENERIC_C031G4UX +GenC0.menu.pnum.GENERIC_C031G4UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031G4UX.build.variant=STM32C0xx/C031G(4-6)U + +# Generic C031G6Ux +GenC0.menu.pnum.GENERIC_C031G6UX=Generic C031G6Ux +GenC0.menu.pnum.GENERIC_C031G6UX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031G6UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031G6UX.build.board=GENERIC_C031G6UX +GenC0.menu.pnum.GENERIC_C031G6UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031G6UX.build.variant=STM32C0xx/C031G(4-6)U + diff --git a/variants/STM32C0xx/C031G(4-6)U/generic_clock.c b/variants/STM32C0xx/C031G(4-6)U/generic_clock.c new file mode 100644 index 0000000000..52bf5c14b9 --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/generic_clock.c @@ -0,0 +1,27 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031G4UX) || defined(ARDUINO_GENERIC_C031G6UX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031G(4-6)U/variant_generic.cpp b/variants/STM32C0xx/C031G(4-6)U/variant_generic.cpp new file mode 100644 index 0000000000..a555ffaeed --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/variant_generic.cpp @@ -0,0 +1,67 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031G4UX) || defined(ARDUINO_GENERIC_C031G6UX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_3, // D3/A3 + PA_4, // D4/A4 + PA_5, // D5/A5 + PA_6, // D6/A6 + PA_7, // D7/A7 + PA_8, // D8/A8 + PA_11, // D9/A9 + PA_12, // D10/A10 + PA_13, // D11/A11 + PA_14, // D12/A12 + PA_15, // D13 + PB_0, // D14/A13 + PB_1, // D15/A14 + PB_3, // D16 + PB_4, // D17 + PB_5, // D18 + PB_6, // D19 + PB_7, // D20 + PB_8, // D21 + PC_6, // D22 + PC_14, // D23 + PC_15, // D24 + PF_2, // D25 + PA_9_R, // D26 + PA_10_R // D27 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 8, // A8, PA8 + 9, // A9, PA11 + 10, // A10, PA12 + 11, // A11, PA13 + 12, // A12, PA14 + 14, // A13, PB0 + 15 // A14, PB1 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031G(4-6)U/variant_generic.h b/variants/STM32C0xx/C031G(4-6)U/variant_generic.h new file mode 100644 index 0000000000..38a305ef13 --- /dev/null +++ b/variants/STM32C0xx/C031G(4-6)U/variant_generic.h @@ -0,0 +1,176 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PA8 PIN_A8 +#define PA11 PIN_A9 +#define PA12 PIN_A10 +#define PA13 PIN_A11 +#define PA14 PIN_A12 +#define PA15 13 +#define PB0 PIN_A13 +#define PB1 PIN_A14 +#define PB3 16 +#define PB4 17 +#define PB5 18 +#define PB6 19 +#define PB7 20 +#define PB8 21 +#define PC6 22 +#define PC14 23 +#define PC15 24 +#define PF2 25 +#define PA9_R 26 +#define PA10_R 27 + +// Alternate pins number +#define PA0_ALT1 (PA0 | ALT1) +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA4_ALT2 (PA4 | ALT2) +#define PA5_ALT1 (PA5 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA8_ALT1 (PA8 | ALT1) +#define PA8_ALT2 (PA8 | ALT2) +#define PA8_ALT3 (PA8 | ALT3) +#define PA8_ALT4 (PA8 | ALT4) +#define PA8_ALT5 (PA8 | ALT5) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB1_ALT3 (PB1 | ALT3) +#define PB3_ALT1 (PB3 | ALT1) +#define PB5_ALT1 (PB5 | ALT1) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB6_ALT3 (PB6 | ALT3) +#define PB6_ALT4 (PB6 | ALT4) +#define PB6_ALT5 (PB6 | ALT5) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB7_ALT3 (PB7 | ALT3) +#define PB7_ALT4 (PB7 | ALT4) +#define PB8_ALT1 (PB8 | ALT1) +#define PC14_ALT1 (PC14 | ALT1) + +#define NUM_DIGITAL_PINS 28 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 15 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA8 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PA14 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PA15 +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10_R +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9_R +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/PeripheralPins.c b/variants/STM32C0xx/C031K(4-6)(T-U)/PeripheralPins.c new file mode 100644 index 0000000000..eb15129796 --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/PeripheralPins.c @@ -0,0 +1,267 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32C031K(4-6)Tx.xml, STM32C031K(4-6)Ux.xml + * CubeMX DB release 6.0.70 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_IN17 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_IN18 + {PB_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_IN19 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_10_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PC_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PA_9_R, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF14_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_0_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 0)}, // TIM1_CH2 + {PA_1_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PA_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 3, 0)}, // TIM1_CH3 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_3_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 4, 0)}, // TIM1_CH4 + {PA_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PA_4_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_4_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 1)}, // TIM17_CH1N + {PA_5, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 1, 0)}, // TIM1_CH1 + {PA_5_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM1, 2, 1)}, // TIM1_CH2N + {PA_8_ALT2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 3, 1)}, // TIM1_CH3N + {PA_8_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 3, 0)}, // TIM3_CH3 + {PA_8_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 4, 0)}, // TIM3_CH4 + {PA_8_ALT5, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM14, 1, 0)}, // TIM14_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_9_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_10_R, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM1, 1, 0)}, // TIM1_CH1 + {PA_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM1, 2, 1)}, // TIM1_CH2N + {PB_1_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT3, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PB_3_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 2, 0)}, // TIM3_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_5_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 2, 0)}, // TIM1_CH2 + {PB_6_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PB_6_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_TIM3, 1, 0)}, // TIM3_CH1 + {PB_6_ALT3, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF13_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6_ALT4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PB_6_ALT5, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 1, 0)}, // TIM3_CH1 + {PB_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7_ALT3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM16, 1, 0)}, // TIM16_CH1 + {PB_7_ALT4, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 1, 0)}, // TIM3_CH1 + {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 2, 0)}, // TIM3_CH2 + {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PC_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM3, 2, 0)}, // TIM3_CH2 + {PC_14_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + {PC_15, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM3, 3, 0)}, // TIM3_CH3 + {PF_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PC_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_USART1)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10_R, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_13, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_9, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PC_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART1)}, + {PB_7, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_USART2)}, + {PB_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/PinNamesVar.h b/variants/STM32C0xx/C031K(4-6)(T-U)/PinNamesVar.h new file mode 100644 index 0000000000..715535c966 --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/PinNamesVar.h @@ -0,0 +1,67 @@ +/* Remap pin name */ +PA_9_R = PA_9 | PREMAP, +PA_10_R = PA_10 | PREMAP, + +/* Alternate pin name */ +PA_0_ALT1 = PA_0 | ALT1, +PA_1_ALT1 = PA_1 | ALT1, +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, +PA_4_ALT1 = PA_4 | ALT1, +PA_4_ALT2 = PA_4 | ALT2, +PA_5_ALT1 = PA_5 | ALT1, +PA_6_ALT1 = PA_6 | ALT1, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PA_7_ALT3 = PA_7 | ALT3, +PA_8_ALT1 = PA_8 | ALT1, +PA_8_ALT2 = PA_8 | ALT2, +PA_8_ALT3 = PA_8 | ALT3, +PA_8_ALT4 = PA_8 | ALT4, +PA_8_ALT5 = PA_8 | ALT5, +PB_0_ALT1 = PB_0 | ALT1, +PB_1_ALT1 = PB_1 | ALT1, +PB_1_ALT2 = PB_1 | ALT2, +PB_1_ALT3 = PB_1 | ALT3, +PB_3_ALT1 = PB_3 | ALT1, +PB_5_ALT1 = PB_5 | ALT1, +PB_6_ALT1 = PB_6 | ALT1, +PB_6_ALT2 = PB_6 | ALT2, +PB_6_ALT3 = PB_6 | ALT3, +PB_6_ALT4 = PB_6 | ALT4, +PB_6_ALT5 = PB_6 | ALT5, +PB_7_ALT1 = PB_7 | ALT1, +PB_7_ALT2 = PB_7 | ALT2, +PB_7_ALT3 = PB_7 | ALT3, +PB_7_ALT4 = PB_7 | ALT4, +PB_8_ALT1 = PB_8 | ALT1, +PB_9_ALT1 = PB_9 | ALT1, +PC_14_ALT1 = PC_14 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PA_4, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_6, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif + +/* No USB */ diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/boards_entry.txt b/variants/STM32C0xx/C031K(4-6)(T-U)/boards_entry.txt new file mode 100644 index 0000000000..4e6aedd099 --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/boards_entry.txt @@ -0,0 +1,37 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 + +# Generic C031K4Tx +GenC0.menu.pnum.GENERIC_C031K4TX=Generic C031K4Tx +GenC0.menu.pnum.GENERIC_C031K4TX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031K4TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031K4TX.build.board=GENERIC_C031K4TX +GenC0.menu.pnum.GENERIC_C031K4TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031K4TX.build.variant=STM32C0xx/C031K(4-6)(T-U) + +# Generic C031K6Tx +GenC0.menu.pnum.GENERIC_C031K6TX=Generic C031K6Tx +GenC0.menu.pnum.GENERIC_C031K6TX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031K6TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031K6TX.build.board=GENERIC_C031K6TX +GenC0.menu.pnum.GENERIC_C031K6TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031K6TX.build.variant=STM32C0xx/C031K(4-6)(T-U) + +# Generic C031K4Ux +GenC0.menu.pnum.GENERIC_C031K4UX=Generic C031K4Ux +GenC0.menu.pnum.GENERIC_C031K4UX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031K4UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031K4UX.build.board=GENERIC_C031K4UX +GenC0.menu.pnum.GENERIC_C031K4UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031K4UX.build.variant=STM32C0xx/C031K(4-6)(T-U) + +# Generic C031K6Ux +GenC0.menu.pnum.GENERIC_C031K6UX=Generic C031K6Ux +GenC0.menu.pnum.GENERIC_C031K6UX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031K6UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031K6UX.build.board=GENERIC_C031K6UX +GenC0.menu.pnum.GENERIC_C031K6UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031K6UX.build.variant=STM32C0xx/C031K(4-6)(T-U) + diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/generic_clock.c b/variants/STM32C0xx/C031K(4-6)(T-U)/generic_clock.c new file mode 100644 index 0000000000..1afa230a05 --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/generic_clock.c @@ -0,0 +1,28 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031K4TX) || defined(ARDUINO_GENERIC_C031K4UX) ||\ + defined(ARDUINO_GENERIC_C031K6TX) || defined(ARDUINO_GENERIC_C031K6UX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.cpp b/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.cpp new file mode 100644 index 0000000000..b7e4c1b7ed --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.cpp @@ -0,0 +1,73 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_C031K4TX) || defined(ARDUINO_GENERIC_C031K4UX) ||\ + defined(ARDUINO_GENERIC_C031K6TX) || defined(ARDUINO_GENERIC_C031K6UX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0/A0 + PA_1, // D1/A1 + PA_2, // D2/A2 + PA_3, // D3/A3 + PA_4, // D4/A4 + PA_5, // D5/A5 + PA_6, // D6/A6 + PA_7, // D7/A7 + PA_8, // D8/A8 + PA_9, // D9 + PA_10, // D10 + PA_11, // D11/A9 + PA_12, // D12/A10 + PA_13, // D13/A11 + PA_14, // D14/A12 + PA_15, // D15 + PB_0, // D16/A13 + PB_1, // D17/A14 + PB_2, // D18/A15 + PB_3, // D19 + PB_4, // D20 + PB_5, // D21 + PB_6, // D22 + PB_7, // D23 + PB_8, // D24 + PB_9, // D25 + PC_6, // D26 + PC_14, // D27 + PC_15, // D28 + PF_2, // D29 + PA_9_R, // D30 + PA_10_R // D31 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 8, // A8, PA8 + 11, // A9, PA11 + 12, // A10, PA12 + 13, // A11, PA13 + 14, // A12, PA14 + 16, // A13, PB0 + 17, // A14, PB1 + 18 // A15, PB2 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.h b/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.h new file mode 100644 index 0000000000..8b59b8ebe3 --- /dev/null +++ b/variants/STM32C0xx/C031K(4-6)(T-U)/variant_generic.h @@ -0,0 +1,181 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PA8 PIN_A8 +#define PA9 9 +#define PA10 10 +#define PA11 PIN_A9 +#define PA12 PIN_A10 +#define PA13 PIN_A11 +#define PA14 PIN_A12 +#define PA15 15 +#define PB0 PIN_A13 +#define PB1 PIN_A14 +#define PB2 PIN_A15 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PC6 26 +#define PC14 27 +#define PC15 28 +#define PF2 29 +#define PA9_R 30 +#define PA10_R 31 + +// Alternate pins number +#define PA0_ALT1 (PA0 | ALT1) +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA4_ALT2 (PA4 | ALT2) +#define PA5_ALT1 (PA5 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA8_ALT1 (PA8 | ALT1) +#define PA8_ALT2 (PA8 | ALT2) +#define PA8_ALT3 (PA8 | ALT3) +#define PA8_ALT4 (PA8 | ALT4) +#define PA8_ALT5 (PA8 | ALT5) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB1_ALT3 (PB1 | ALT3) +#define PB3_ALT1 (PB3 | ALT1) +#define PB5_ALT1 (PB5 | ALT1) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB6_ALT3 (PB6 | ALT3) +#define PB6_ALT4 (PB6 | ALT4) +#define PB6_ALT5 (PB6 | ALT5) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB7_ALT3 (PB7 | ALT3) +#define PB7_ALT4 (PB7 | ALT4) +#define PB8_ALT1 (PB8 | ALT1) +#define PB9_ALT1 (PB9 | ALT1) +#define PC14_ALT1 (PC14 | ALT1) + +#define NUM_DIGITAL_PINS 32 +#define NUM_REMAP_PINS 2 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PA8 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PA14 +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PA15 +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA2 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA1 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA0 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif From 17ce259a835e9a1e829849c37fc708b16030b8ec Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Wed, 27 Oct 2021 16:58:13 +0200 Subject: [PATCH 10/23] variant(C0): add C031C(4-6)(T-U) generic support Note: SystemClock_Config() is based on LL to spare a maximum memory Signed-off-by: Alexandre Bourdiol --- README.md | 7 + boards.txt | 92 +++++++++ .../STM32C0xx/C031C(4-6)(T-U)/generic_clock.c | 29 ++- .../STM32C0xx/C031C(4-6)(T-U)/ldscript.ld | 177 ++++++++++++++++++ 4 files changed, 303 insertions(+), 2 deletions(-) create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/ldscript.ld diff --git a/README.md b/README.md index 01b890763f..35d86029d5 100644 --- a/README.md +++ b/README.md @@ -56,6 +56,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d - [Discovery boards](#discovery-boards) - [Eval boards](#eval-boards) - [STM32MP1 series coprocessor boards](#stm32mp1-series-coprocessor-boards) + - [Generic STM32C0 boards](#generic-stm32c0-boards) - [Generic STM32F0 boards](#generic-stm32f0-boards) - [Generic STM32F1 boards](#generic-stm32f1-boards) - [Generic STM32F2 boards](#generic-stm32f2-boards) @@ -176,6 +177,12 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | :green_heart: | STM32MP157A | [STM32MP157A-DK1](https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html) | *1.8.0* | See [the documentation](https://github.com/stm32duino/Arduino_Core_STM32/tree/main/variants/STM32MP157_DK/README.md) to use this board| | :green_heart: | STM32MP157C | [STM32MP157C-DK2](https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html) | *1.8.0* | See [the documentation](https://github.com/stm32duino/Arduino_Core_STM32/tree/main/variants/STM32MP157_DK/README.md) to use this board| +### Generic STM32C0 boards + +| Status | Device(s) | Name | Release | Notes | +| :----: | :-------: | ---- | :-----: | :---- | +| :yellow_heart: | STM32C031C4
STM32C031C6 | Generic Board | **2.5.0** | | + ### Generic STM32F0 boards | Status | Device(s) | Name | Release | Notes | diff --git a/boards.txt b/boards.txt index 97d7a725b9..ab62d193a8 100644 --- a/boards.txt +++ b/boards.txt @@ -1090,6 +1090,60 @@ STM32MP1.menu.upload_method.MassStorage=Generate run_arduino.sh (You need to cop STM32MP1.menu.upload_method.MassStorage.upload.protocol= STM32MP1.menu.upload_method.MassStorage.upload.tool=remoteproc_gen +############################### +# Generic C0 +GenC0.name=Generic STM32C0 series + +GenC0.build.core=arduino +GenC0.build.board=GenC0 +GenC0.build.mcu=cortex-m0plus +GenC0.build.series=STM32C0xx +GenC0.build.cmsis_lib_gcc=arm_cortexM0l_math +GenC0.build.extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0 + +# Generic C031C4Tx +GenC0.menu.pnum.GENERIC_C031C4TX=Generic C031C4Tx +GenC0.menu.pnum.GENERIC_C031C4TX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031C4TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C4TX.build.board=GENERIC_C031C4TX +GenC0.menu.pnum.GENERIC_C031C4TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C4TX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C6Tx +GenC0.menu.pnum.GENERIC_C031C6TX=Generic C031C6Tx +GenC0.menu.pnum.GENERIC_C031C6TX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031C6TX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C6TX.build.board=GENERIC_C031C6TX +GenC0.menu.pnum.GENERIC_C031C6TX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C6TX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C4Ux +GenC0.menu.pnum.GENERIC_C031C4UX=Generic C031C4Ux +GenC0.menu.pnum.GENERIC_C031C4UX.upload.maximum_size=16384 +GenC0.menu.pnum.GENERIC_C031C4UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C4UX.build.board=GENERIC_C031C4UX +GenC0.menu.pnum.GENERIC_C031C4UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C4UX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Generic C031C6Ux +GenC0.menu.pnum.GENERIC_C031C6UX=Generic C031C6Ux +GenC0.menu.pnum.GENERIC_C031C6UX.upload.maximum_size=32768 +GenC0.menu.pnum.GENERIC_C031C6UX.upload.maximum_data_size=12288 +GenC0.menu.pnum.GENERIC_C031C6UX.build.board=GENERIC_C031C6UX +GenC0.menu.pnum.GENERIC_C031C6UX.build.product_line=STM32C031xx +GenC0.menu.pnum.GENERIC_C031C6UX.build.variant=STM32C0xx/C031C(4-6)(T-U) + +# Upload menu +GenC0.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) +GenC0.menu.upload_method.swdMethod.upload.protocol=0 +GenC0.menu.upload_method.swdMethod.upload.options=-g +GenC0.menu.upload_method.swdMethod.upload.tool=stm32CubeProg + +GenC0.menu.upload_method.serialMethod=STM32CubeProgrammer (Serial) +GenC0.menu.upload_method.serialMethod.upload.protocol=1 +GenC0.menu.upload_method.serialMethod.upload.options={serial.port.file} -s +GenC0.menu.upload_method.serialMethod.upload.tool=stm32CubeProg + ############################### # Generic F0 GenF0.name=Generic STM32F0 series @@ -10500,6 +10554,12 @@ STM32MP1.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NO STM32MP1.menu.xserial.disabled=Disabled (no Serial support) STM32MP1.menu.xserial.disabled.build.xSerial= +GenC0.menu.xserial.generic=Enabled (generic 'Serial') +GenC0.menu.xserial.none=Enabled (no generic 'Serial') +GenC0.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE +GenC0.menu.xserial.disabled=Disabled (no Serial support) +GenC0.menu.xserial.disabled.build.xSerial= + GenF0.menu.xserial.generic=Enabled (generic 'Serial') GenF0.menu.xserial.none=Enabled (no generic 'Serial') GenF0.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE @@ -11088,6 +11148,24 @@ STM32MP1.menu.opt.ogstd.build.flags.optimize=-Og STM32MP1.menu.opt.o0std=No Optimization (-O0) STM32MP1.menu.opt.o0std.build.flags.optimize=-O0 +GenC0.menu.opt.osstd=Smallest (-Os default) +GenC0.menu.opt.oslto=Smallest (-Os) with LTO +GenC0.menu.opt.oslto.build.flags.optimize=-Os -flto +GenC0.menu.opt.o1std=Fast (-O1) +GenC0.menu.opt.o1std.build.flags.optimize=-O1 +GenC0.menu.opt.o1lto=Fast (-O1) with LTO +GenC0.menu.opt.o1lto.build.flags.optimize=-O1 -flto +GenC0.menu.opt.o2std=Faster (-O2) +GenC0.menu.opt.o2std.build.flags.optimize=-O2 +GenC0.menu.opt.o2lto=Faster (-O2) with LTO +GenC0.menu.opt.o2lto.build.flags.optimize=-O2 -flto +GenC0.menu.opt.o3std=Fastest (-O3) +GenC0.menu.opt.o3std.build.flags.optimize=-O3 +GenC0.menu.opt.o3lto=Fastest (-O3) with LTO +GenC0.menu.opt.o3lto.build.flags.optimize=-O3 -flto +GenC0.menu.opt.ogstd=Debug (-Og) +GenC0.menu.opt.ogstd.build.flags.optimize=-Og + GenF0.menu.opt.osstd=Smallest (-Os default) GenF0.menu.opt.oslto=Smallest (-Os) with LTO GenF0.menu.opt.oslto.build.flags.optimize=-Os -flto @@ -11618,6 +11696,10 @@ STM32MP1.menu.dbg.enable_log.build.flags.debug= STM32MP1.menu.dbg.enable_all=Core Logs and Symbols Enabled (-g) STM32MP1.menu.dbg.enable_all.build.flags.debug=-g +GenC0.menu.dbg.none=None +GenC0.menu.dbg.enable=Enabled (-g) +GenC0.menu.dbg.enable.build.flags.debug=-g + GenF0.menu.dbg.none=None GenF0.menu.dbg.enable_sym=Symbols Enabled (-g) GenF0.menu.dbg.enable_sym.build.flags.debug=-g -DNDEBUG @@ -11863,6 +11945,16 @@ STM32MP1.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_fl STM32MP1.menu.rtlib.full=Newlib Standard STM32MP1.menu.rtlib.full.build.flags.ldspecs= +GenC0.menu.rtlib.nano=Newlib Nano (default) +GenC0.menu.rtlib.nanofp=Newlib Nano + Float Printf +GenC0.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float +GenC0.menu.rtlib.nanofs=Newlib Nano + Float Scanf +GenC0.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float +GenC0.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf +GenC0.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float +GenC0.menu.rtlib.full=Newlib Standard +GenC0.menu.rtlib.full.build.flags.ldspecs= + GenF0.menu.rtlib.nano=Newlib Nano (default) GenF0.menu.rtlib.nanofp=Newlib Nano + Float Printf GenF0.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c b/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c index 969012090a..7432f3b741 100644 --- a/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/generic_clock.c @@ -13,6 +13,7 @@ #if defined(ARDUINO_GENERIC_C031C4TX) || defined(ARDUINO_GENERIC_C031C4UX) ||\ defined(ARDUINO_GENERIC_C031C6TX) || defined(ARDUINO_GENERIC_C031C6UX) #include "pins_arduino.h" +#include "stm32yyxx_ll_utils.h" /** * @brief System Clock Configuration @@ -21,8 +22,32 @@ */ WEAK void SystemClock_Config(void) { - /* SystemClock_Config can be generated by STM32CubeMX */ -#warning "SystemClock_Config() is empty. Default clock at reset is used." + LL_FLASH_SetLatency(LL_FLASH_LATENCY_1); + + /* HSI configuration and activation */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1) { + } + + LL_RCC_HSI_SetCalibTrimming(64); + LL_RCC_SetHSIDiv(LL_RCC_HSI_DIV_1); + /* Set AHB prescaler*/ + LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1); + + /* Sysclk activation on the HSI */ + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) { + } + + /* Set APB1 prescaler*/ + LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1); + /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */ + LL_SetSystemCoreClock(48000000); + + /* Update the time base */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) { + Error_Handler(); + } } #endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/ldscript.ld b/variants/STM32C0xx/C031C(4-6)(T-U)/ldscript.ld new file mode 100644 index 0000000000..fb176f70ab --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/ldscript.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * Abstract : Linker script for STM32C031CxTx Device from stm32c0 series + * 32Kbytes FLASH + * 12Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000+ LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} From 10a4ddb48e756a9f80f0b25df599a45bc2c5e836 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Mon, 10 Jan 2022 10:05:52 +0100 Subject: [PATCH 11/23] core(C0): Enable/disable Backup Domain write protection depending on series C0 doesn't have ability to enable/disable Backup Domain write protection Signed-off-by: Alexandre Bourdiol --- cores/arduino/stm32/backup.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/cores/arduino/stm32/backup.h b/cores/arduino/stm32/backup.h index 915b71a54b..bd5db20f8f 100644 --- a/cores/arduino/stm32/backup.h +++ b/cores/arduino/stm32/backup.h @@ -51,10 +51,15 @@ extern "C" { #endif /* HID_MAGIC_NUMBER_BKP_VALUE */ #endif /* BL_HID */ +#if defined(HAL_PWR_MODULE_ENABLED) && \ + (defined(PWR_CR_DBP) || defined(PWR_CR1_DBP) || defined(PWR_DBPR_DBP)) +#define PWR_ENABLE_BACKUP_ACCESS_EXIST +#endif + /* Exported functions ------------------------------------------------------- */ static inline void resetBackupDomain(void) { -#ifdef HAL_PWR_MODULE_ENABLED +#if defined(PWR_ENABLE_BACKUP_ACCESS_EXIST) /* Enable access to the RTC registers */ HAL_PWR_EnableBkUpAccess(); /** @@ -69,7 +74,7 @@ static inline void resetBackupDomain(void) static inline void enableBackupDomain(void) { -#ifdef HAL_PWR_MODULE_ENABLED +#if defined(PWR_ENABLE_BACKUP_ACCESS_EXIST) /* Allow access to Backup domain */ HAL_PWR_EnableBkUpAccess(); #endif @@ -85,7 +90,7 @@ static inline void enableBackupDomain(void) static inline void disableBackupDomain(void) { -#ifdef HAL_PWR_MODULE_ENABLED +#if defined(PWR_ENABLE_BACKUP_ACCESS_EXIST) /* Forbid access to Backup domain */ HAL_PWR_DisableBkUpAccess(); #endif From f36364e37caebb0d9c998d25aac1620b57b868ad Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Mon, 10 Jan 2022 11:04:35 +0100 Subject: [PATCH 12/23] core(C0): Backup register LL API change Signed-off-by: Alexandre Bourdiol --- cores/arduino/stm32/backup.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/cores/arduino/stm32/backup.h b/cores/arduino/stm32/backup.h index bd5db20f8f..e17c98dfc0 100644 --- a/cores/arduino/stm32/backup.h +++ b/cores/arduino/stm32/backup.h @@ -119,6 +119,8 @@ static inline void setBackupRegister(uint32_t index, uint32_t value) #else LL_RTC_BKP_SetRegister(TAMP, index, value); #endif +#elif defined(BKPREG1) + LL_PWR_BKP_SetRegister(index, value); #else UNUSED(index); UNUSED(value); @@ -140,6 +142,8 @@ static inline uint32_t getBackupRegister(uint32_t index) #else return LL_RTC_BKP_GetRegister(TAMP, index); #endif +#elif defined(BKPREG1) + return LL_PWR_BKP_GetRegister(index); #else UNUSED(index); return 0; From 56df9ea04d1acaeb5729bf5a2fa15c2e719e3a15 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Mon, 10 Jan 2022 11:08:36 +0100 Subject: [PATCH 13/23] core(C0): TIM1_IRQn definition Signed-off-by: Alexandre Bourdiol --- cores/arduino/stm32/timer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cores/arduino/stm32/timer.h b/cores/arduino/stm32/timer.h index 4cdb0575aa..8af2740642 100644 --- a/cores/arduino/stm32/timer.h +++ b/cores/arduino/stm32/timer.h @@ -37,7 +37,7 @@ extern "C" { #endif #if defined(TIM1_BASE) && !defined(TIM1_IRQn) -#if defined(STM32F0xx) || defined(STM32G0xx) +#if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) #define TIM1_IRQn TIM1_BRK_UP_TRG_COM_IRQn #define TIM1_IRQHandler TIM1_BRK_UP_TRG_COM_IRQHandler #elif defined(STM32F1xx) ||defined(STM32G4xx) From dbd48886001a9999820c80ba28f7bec97e5affb6 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Mon, 10 Jan 2022 11:14:54 +0100 Subject: [PATCH 14/23] libraries(C0): Add GPIO EXTI support Signed-off-by: Alexandre Bourdiol --- libraries/SrcWrapper/src/stm32/interrupt.cpp | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/libraries/SrcWrapper/src/stm32/interrupt.cpp b/libraries/SrcWrapper/src/stm32/interrupt.cpp index b187092efa..96a29685a8 100644 --- a/libraries/SrcWrapper/src/stm32/interrupt.cpp +++ b/libraries/SrcWrapper/src/stm32/interrupt.cpp @@ -53,7 +53,7 @@ typedef struct { /* Private Variables */ static gpio_irq_conf_str gpio_irq_conf[NB_EXTI] = { -#if defined (STM32F0xx) || defined (STM32G0xx) || defined (STM32L0xx) +#if defined (STM32C0xx) || defined (STM32F0xx) || defined (STM32G0xx) || defined (STM32L0xx) {.irqnb = EXTI0_1_IRQn, .callback = NULL}, //GPIO_PIN_0 {.irqnb = EXTI0_1_IRQn, .callback = NULL}, //GPIO_PIN_1 {.irqnb = EXTI2_3_IRQn, .callback = NULL}, //GPIO_PIN_2 @@ -250,7 +250,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) } } -#if defined(STM32G0xx) || defined(STM32MP1xx) || defined(STM32L5xx) || defined(STM32U5xx) +#if defined(STM32C0xx) || defined(STM32G0xx) || defined(STM32MP1xx) || defined(STM32L5xx) || defined(STM32U5xx) /** * @brief EXTI line detection callback. * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. @@ -272,7 +272,7 @@ void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin) } #endif -#if defined (STM32F0xx) || defined (STM32G0xx) || defined (STM32L0xx) +#if defined (STM32C0xx) || (STM32F0xx) || defined (STM32G0xx) || defined (STM32L0xx) #ifdef __cplusplus extern "C" { #endif From 11f5faf1e272909a612acfabdf0874714b7c27eb Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 10:14:25 +0100 Subject: [PATCH 15/23] libraries(C0): I2C support Signed-off-by: Alexandre Bourdiol --- libraries/Wire/src/utility/twi.c | 22 +++++++++++----------- libraries/Wire/src/utility/twi.h | 10 +++++----- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/libraries/Wire/src/utility/twi.c b/libraries/Wire/src/utility/twi.c index 50d7f5e2ed..7dafedfee2 100644 --- a/libraries/Wire/src/utility/twi.c +++ b/libraries/Wire/src/utility/twi.c @@ -674,9 +674,9 @@ void i2c_custom_init(i2c_t *obj, uint32_t timing, uint32_t addressingMode, uint3 __HAL_RCC_I2C1_RELEASE_RESET(); obj->irq = I2C1_EV_IRQn; -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) obj->irqER = I2C1_ER_IRQn; -#endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx */ +#endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx */ i2c_handles[I2C1_INDEX] = handle; } #endif // I2C1_BASE @@ -702,7 +702,7 @@ void i2c_custom_init(i2c_t *obj, uint32_t timing, uint32_t addressingMode, uint3 obj->irq = I2C3_EV_IRQn; #if !defined(STM32G0xx) && !defined(STM32L0xx) obj->irqER = I2C3_ER_IRQn; -#endif /* !STM32L0xx */ +#endif /* !STM32G0xx && !STM32L0xx */ i2c_handles[I2C3_INDEX] = handle; } #endif // I2C3_BASE @@ -768,10 +768,10 @@ void i2c_custom_init(i2c_t *obj, uint32_t timing, uint32_t addressingMode, uint3 HAL_NVIC_SetPriority(obj->irq, I2C_IRQ_PRIO, I2C_IRQ_SUBPRIO); HAL_NVIC_EnableIRQ(obj->irq); -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) HAL_NVIC_SetPriority(obj->irqER, I2C_IRQ_PRIO, I2C_IRQ_SUBPRIO); HAL_NVIC_EnableIRQ(obj->irqER); -#endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx */ +#endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx */ /* Init the I2C */ if (HAL_I2C_Init(handle) != HAL_OK) { @@ -795,9 +795,9 @@ void i2c_custom_init(i2c_t *obj, uint32_t timing, uint32_t addressingMode, uint3 void i2c_deinit(i2c_t *obj) { HAL_NVIC_DisableIRQ(obj->irq); -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) HAL_NVIC_DisableIRQ(obj->irqER); -#endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx */ +#endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx */ HAL_I2C_DeInit(&(obj->handle)); } @@ -1174,12 +1174,12 @@ void I2C1_EV_IRQHandler(void) { I2C_HandleTypeDef *handle = i2c_handles[I2C1_INDEX]; HAL_I2C_EV_IRQHandler(handle); -#if defined(STM32F0xx) || defined(STM32G0xx) || defined(STM32L0xx) +#if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) || defined(STM32L0xx) HAL_I2C_ER_IRQHandler(handle); -#endif /* STM32F0xx || STM32G0xx || STM32L0xx */ +#endif /* STM32C0xx || STM32F0xx || STM32G0xx || STM32L0xx */ } -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) /** * @brief This function handles I2C1 interrupt. * @param None @@ -1190,7 +1190,7 @@ void I2C1_ER_IRQHandler(void) I2C_HandleTypeDef *handle = i2c_handles[I2C1_INDEX]; HAL_I2C_ER_IRQHandler(handle); } -#endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx */ +#endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx */ #endif // I2C1_BASE #if defined(I2C2_BASE) diff --git a/libraries/Wire/src/utility/twi.h b/libraries/Wire/src/utility/twi.h index 2881f73fb1..8fb3dc6b81 100644 --- a/libraries/Wire/src/utility/twi.h +++ b/libraries/Wire/src/utility/twi.h @@ -67,8 +67,8 @@ extern "C" { #error I2C buffer size cannot exceed 255 #endif -/* Redefinition of IRQ for F0/G0/L0 families */ -#if defined(STM32F0xx) || defined(STM32G0xx) || defined(STM32L0xx) +/* Redefinition of IRQ for C0/F0/G0/L0 families */ +#if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) || defined(STM32L0xx) #if defined(I2C1_BASE) #define I2C1_EV_IRQn I2C1_IRQn #define I2C1_EV_IRQHandler I2C1_IRQHandler @@ -95,7 +95,7 @@ extern "C" { #define I2C4_EV_IRQn I2C4_IRQn #define I2C4_EV_IRQHandler I2C4_IRQHandler #endif // defined(I2C4_BASE) -#endif /* STM32F0xx || STM32G0xx || STM32L0xx */ +#endif /* STM32C0xx || STM32F0xx || STM32G0xx || STM32L0xx */ typedef struct i2c_s i2c_t; @@ -111,9 +111,9 @@ struct i2c_s { PinName sda; PinName scl; IRQn_Type irq; -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) IRQn_Type irqER; -#endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx */ +#endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx */ volatile int slaveRxNbData; // Number of accumulated bytes received in Slave mode void (*i2c_onSlaveReceive)(i2c_t *); void (*i2c_onSlaveTransmit)(i2c_t *); From b7c4c135f22fb450c547c3e49f064a0aeb5159d0 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 10:30:26 +0100 Subject: [PATCH 16/23] libraries(C0): Remove PLL reference when not available C0 doesn't have PLL Signed-off-by: Alexandre Bourdiol --- libraries/SrcWrapper/src/stm32/clock.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/libraries/SrcWrapper/src/stm32/clock.c b/libraries/SrcWrapper/src/stm32/clock.c index 566831e4d7..208b97070e 100644 --- a/libraries/SrcWrapper/src/stm32/clock.c +++ b/libraries/SrcWrapper/src/stm32/clock.c @@ -77,7 +77,9 @@ void SysTick_Handler(void) void enableClock(sourceClock_t source) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; +#if defined(RCC_PLL_NONE) RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; +#endif #if defined(STM32MP1xx) /** Clock source selection is done by First Stage Boot Loader on Cortex A From 0fa37dd5cff3082a664567c9df21a95357094e92 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 10:52:03 +0100 Subject: [PATCH 17/23] cores(C0): Some peripherals have HSIKER source instead of HSI C0 doesn't have RCC_USART1CLKSOURCE_HSI but instead RCC_USART1CLKSOURCE_HSIKER Note: both HSI and HSIKER have the same HSI48 base, but each have a dedicated prescaler. This apply to UART1 and I2C1 Signed-off-by: Alexandre Bourdiol --- cores/arduino/stm32/uart.h | 9 +++++++++ libraries/Wire/src/utility/twi.c | 5 +++++ 2 files changed, 14 insertions(+) diff --git a/cores/arduino/stm32/uart.h b/cores/arduino/stm32/uart.h index cea0b0b305..9d2da47549 100644 --- a/cores/arduino/stm32/uart.h +++ b/cores/arduino/stm32/uart.h @@ -88,6 +88,15 @@ struct serial_s { /* Exported constants --------------------------------------------------------*/ #define TX_TIMEOUT 1000 +#if !defined(RCC_USART1CLKSOURCE_HSI) +/* Some series like C0 have 2 derivated clock from HSI: HSIKER (for peripherals) + * and HSISYS (for system clock). But each have a dedicated prescaler. + * To avoid changing Arduino implementation, + * remap RCC_USART1CLKSOURCE_HSI to RCC_USART1CLKSOURCE_HSIKER + */ +#define RCC_USART1CLKSOURCE_HSI RCC_USART1CLKSOURCE_HSIKER +#endif + #if defined(USART2_BASE) && !defined(USART2_IRQn) #if defined(STM32G0xx) #if defined(LPUART2_BASE) diff --git a/libraries/Wire/src/utility/twi.c b/libraries/Wire/src/utility/twi.c index 7dafedfee2..a4a2539f7c 100644 --- a/libraries/Wire/src/utility/twi.c +++ b/libraries/Wire/src/utility/twi.c @@ -210,6 +210,11 @@ static uint32_t i2c_getClkFreq(I2C_TypeDef *i2c) clkSrcFreq = HSI_VALUE; break; #endif +#ifdef RCC_I2C1CLKSOURCE_HSIKER + case RCC_I2C1CLKSOURCE_HSIKER: + clkSrcFreq = __LL_RCC_CALC_HSIKER_FREQ(LL_RCC_HSIKER_GetDivider()); + break; +#endif #ifdef RCC_I2C1CLKSOURCE_SYSCLK case RCC_I2C1CLKSOURCE_SYSCLK: clkSrcFreq = SystemCoreClock; From 60eba704d38a5ea164412064dcbf375b95f867f0 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 11:40:04 +0100 Subject: [PATCH 18/23] cores(C0): HardwareTimer, C0 doesn't support APB2 Signed-off-by: Alexandre Bourdiol --- libraries/SrcWrapper/src/HardwareTimer.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libraries/SrcWrapper/src/HardwareTimer.cpp b/libraries/SrcWrapper/src/HardwareTimer.cpp index d9de8dfcd2..231f53f41d 100644 --- a/libraries/SrcWrapper/src/HardwareTimer.cpp +++ b/libraries/SrcWrapper/src/HardwareTimer.cpp @@ -1383,7 +1383,7 @@ uint32_t HardwareTimer::getTimerClkFreq() uwAPBxPrescaler = clkconfig.APB1CLKDivider; uwTimclock = HAL_RCC_GetPCLK1Freq(); break; -#if !defined(STM32F0xx) && !defined(STM32G0xx) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) case 2: uwAPBxPrescaler = clkconfig.APB2CLKDivider; uwTimclock = HAL_RCC_GetPCLK2Freq(); From 4da73afcf78b4147cc6834627db616b671df6ebd Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 11:42:13 +0100 Subject: [PATCH 19/23] libraries(C0): ADC support Signed-off-by: Alexandre Bourdiol --- libraries/SrcWrapper/src/stm32/analog.cpp | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/libraries/SrcWrapper/src/stm32/analog.cpp b/libraries/SrcWrapper/src/stm32/analog.cpp index 47062ac334..da96456ba1 100644 --- a/libraries/SrcWrapper/src/stm32/analog.cpp +++ b/libraries/SrcWrapper/src/stm32/analog.cpp @@ -191,6 +191,7 @@ uint32_t get_adc_channel(PinName pin, uint32_t *bank) case 22: channel = ADC_CHANNEL_22; break; +#ifdef ADC_CHANNEL_23 case 23: channel = ADC_CHANNEL_23; break; @@ -222,6 +223,7 @@ uint32_t get_adc_channel(PinName pin, uint32_t *bank) break; #endif #endif +#endif #endif default: _Error_Handler("ADC: Unknown adc channel", (int)(STM_PIN_CHANNEL(function))); @@ -873,8 +875,8 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) AdcHandle.Init.NbrOfConversion = 1; /* Specifies the number of ranks that will be converted within the regular group sequencer. */ #endif AdcHandle.Init.DiscontinuousConvMode = DISABLE; /* Parameter discarded because sequencer is disabled */ -#if !defined(STM32F0xx) && !defined(STM32G0xx) && !defined(STM32L0xx) && \ - !defined(STM32WLxx) && !defined(ADC_SUPPORT_2_5_MSPS) +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && \ + !defined(STM32L0xx) && !defined(STM32WLxx) && !defined(ADC_SUPPORT_2_5_MSPS) AdcHandle.Init.NbrOfDiscConversion = 0; /* Parameter discarded because sequencer is disabled */ #endif AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START; /* Software start to trig the 1st conversion manually, without external event */ @@ -898,8 +900,8 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) #if defined(STM32F0xx) AdcHandle.Init.SamplingTimeCommon = samplingTime; #endif -#if defined(STM32G0xx) || defined(STM32U5xx) || defined(STM32WLxx) || \ - defined(ADC_SUPPORT_2_5_MSPS) +#if defined(STM32C0xx) || defined(STM32G0xx) || defined(STM32U5xx) || \ + defined(STM32WLxx) || defined(ADC_SUPPORT_2_5_MSPS) AdcHandle.Init.SamplingTimeCommon1 = samplingTime; /* Set sampling time common to a group of channels. */ AdcHandle.Init.SamplingTimeCommon2 = samplingTime; /* Set sampling time common to a group of channels, second common setting possible.*/ #endif @@ -961,9 +963,9 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) AdcChannelConf.SingleDiff = ADC_SINGLE_ENDED; /* Single-ended input channel */ AdcChannelConf.OffsetNumber = ADC_OFFSET_NONE; /* No offset subtraction */ #endif -#if !defined(STM32F0xx) && !defined(STM32F1xx) && !defined(STM32F2xx) && \ - !defined(STM32G0xx) && !defined(STM32L0xx) && !defined(STM32L1xx) && \ - !defined(STM32WBxx) && !defined(STM32WLxx) && \ +#if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32F1xx) && \ + !defined(STM32F2xx) && !defined(STM32G0xx) && !defined(STM32L0xx) && \ + !defined(STM32L1xx) && !defined(STM32WBxx) && !defined(STM32WLxx) && \ !defined(ADC1_V2_5) AdcChannelConf.Offset = 0; /* Parameter discarded because offset correction is disabled */ #endif From d99cb56f0d4d28f9fddddc7053197d2dad24be2f Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 16:51:02 +0100 Subject: [PATCH 20/23] libraries(C0): SPI is on PCLK1 Signed-off-by: Alexandre Bourdiol --- libraries/SPI/src/utility/spi_com.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libraries/SPI/src/utility/spi_com.c b/libraries/SPI/src/utility/spi_com.c index e00256cc4b..a67813e6b7 100644 --- a/libraries/SPI/src/utility/spi_com.c +++ b/libraries/SPI/src/utility/spi_com.c @@ -57,7 +57,7 @@ uint32_t spi_getClkFreqInst(SPI_TypeDef *spi_inst) { uint32_t spi_freq = SystemCoreClock; if (spi_inst != NP) { -#if defined(STM32F0xx) || defined(STM32G0xx) +#if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) /* SPIx source CLK is PCKL1 */ spi_freq = HAL_RCC_GetPCLK1Freq(); #else From 1650f3a5783bef8e3db16164b4483a1669242d70 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 11 Jan 2022 17:16:36 +0100 Subject: [PATCH 21/23] libraries(C0): Timer is on PCLK1 Signed-off-by: Alexandre Bourdiol --- libraries/SrcWrapper/src/stm32/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libraries/SrcWrapper/src/stm32/timer.c b/libraries/SrcWrapper/src/stm32/timer.c index e9febec358..90a4c042f4 100644 --- a/libraries/SrcWrapper/src/stm32/timer.c +++ b/libraries/SrcWrapper/src/stm32/timer.c @@ -629,7 +629,7 @@ uint8_t getTimerClkSrc(TIM_TypeDef *tim) uint8_t clkSrc = 0; if (tim != (TIM_TypeDef *)NC) -#if defined(STM32F0xx) || defined(STM32G0xx) +#if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) /* TIMx source CLK is PCKL1 */ clkSrc = 1; #else From 4414beb08b9acfb921745303a9886e9bbb3376d1 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Thu, 13 Jan 2022 18:21:15 +0100 Subject: [PATCH 22/23] variant(C0): Add Nucleo C031C6 support Signed-off-by: Alexandre Bourdiol --- README.md | 1 + boards.txt | 13 ++ .../C031C(4-6)(T-U)/variant_NUCLEO_C031C6.cpp | 146 +++++++++++++++++ .../C031C(4-6)(T-U)/variant_NUCLEO_C031C6.h | 153 ++++++++++++++++++ 4 files changed, 313 insertions(+) create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.cpp create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.h diff --git a/README.md b/README.md index 35d86029d5..542ceadcc8 100644 --- a/README.md +++ b/README.md @@ -106,6 +106,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | +| :yellow_heart: | STM32C031C6 | [Nucleo C031C6](https://www.st.com/en/evaluation-tools/nucleo-c031c6.html) | **2.5.0** | | | :green_heart: | STM32F030R8 | [Nucleo F030R8](http://www.st.com/en/evaluation-tools/nucleo-f030r8.html) | *0.2.0* | | | :green_heart: | STM32F070RB | [Nucleo F070RB](http://www.st.com/en/evaluation-tools/nucleo-f070rb.html) | *2.0.0* | | | :green_heart: | STM32F072RB | [Nucleo F072RB](http://www.st.com/en/evaluation-tools/nucleo-f072rb.html) | *1.9.0* | | diff --git a/boards.txt b/boards.txt index ab62d193a8..82ddd11815 100644 --- a/boards.txt +++ b/boards.txt @@ -282,6 +282,19 @@ Nucleo_64.build.st_extra_flags=-D{build.product_line} {build.enable_usb} {build. Nucleo_64.upload.maximum_size=0 Nucleo_64.upload.maximum_data_size=0 +# NUCLEO_C031C6 board +Nucleo_64.menu.pnum.NUCLEO_C031C6=Nucleo C031C6 +Nucleo_64.menu.pnum.NUCLEO_C031C6.node="NOD_C031C6" +Nucleo_64.menu.pnum.NUCLEO_C031C6.upload.maximum_size=32768 +Nucleo_64.menu.pnum.NUCLEO_C031C6.upload.maximum_data_size=12288 +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.mcu=cortex-m0plus +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.board=NUCLEO_C031C6 +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.series=STM32C0xx +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.product_line=STM32C031xx +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.variant=STM32C0xx/C031C(4-6)(T-U) +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.cmsis_lib_gcc=arm_cortexM0l_math +Nucleo_64.menu.pnum.NUCLEO_C031C6.build.extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0 + # NUCLEO_F030R8 board Nucleo_64.menu.pnum.NUCLEO_F030R8=Nucleo F030R8 Nucleo_64.menu.pnum.NUCLEO_F030R8.node="NODE_F030R8,NUCLEO" diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.cpp b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.cpp new file mode 100644 index 0000000000..20419f7d27 --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.cpp @@ -0,0 +1,146 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_C031C6) +#include "pins_arduino.h" +#include "stm32yyxx_ll_utils.h" + +// Digital PinName array +const PinName digitalPin[] = { + // CN9 + PB_7, // D0 + PB_6, // D1 + PA_10, // D2 + PB_3, // D3 + PB_10, // D4 + PB_4, // D5 + PB_5, // D6 + PA_15, // D7 + + // CN5 + PA_9, // D8 + PC_7, // D9 + PB_0, // D10 + PA_7, // D11 + PA_6, // D12 + PA_5, // D13 // LED + PB_9, // D14 + PB_8, // D15 + + // CN7 Left Side + PD_0, // D16 + PD_2, // D17 + PA_14, // D18 + PA_13, // D19 + PC_6, // D20 + PC_13, // D21 // Button + PC_14, // D22 // OSCX_IN + PF_0, // D23 // OSC_IN + PF_1, // D24 // OSC_OUT + PB_11, // D25 + PA_2, // D26 // VCP_TX + + // CN7 Right Side + PD_1, // D27 + + // CN10 Left Side + PD_3, // D28 + PC_11, // D29 + + // CN8 Left Side + PA_0, // D30 + PA_1, // D31 + PA_4, // D32 + PB_1, // D33 + PA_11, // D34 + PA_12, // D35 + + // CN10 Right Side + PA_3, // D36 // VCP_RX + PC_15, // D37 // OSCX_OUT + PB_12, // D38 + PB_2, // D39 + PF_3, // D40 + PA_8, // D41 + PB_15, // D42 + PB_14, // D43 + PB_13, // D44 + + // Others + PF_2 // D45 // NRST +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 30, // A0 + 31, // A1 + 32, // A2 + 33, // A3 + 34, // A4 + 35, // A5 + 26, // A6 + 36, // A7 + 13, // A8 + 12, // A9 + 11, // A10 + 41, // A11 + 19, // A12 + 18, // A13 + 10, // A14 + 39, // A15 + 4, // A16 + 25, // A17 + 38 // A18 +}; + +// ---------------------------------------------------------------------------- +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + LL_FLASH_SetLatency(LL_FLASH_LATENCY_1); + + /* HSE configuration and activation */ + LL_RCC_HSE_Enable(); + while (LL_RCC_HSE_IsReady() != 1) { + } + + /* Set AHB prescaler*/ + LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1); + + /* Sysclk activation on the HSE */ + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSE); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSE) { + } + + /* Set APB1 prescaler*/ + LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1); + /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */ + LL_SetSystemCoreClock(48000000); + + /* Update the time base */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_NUCLEO_C031C6 */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.h b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.h new file mode 100644 index 0000000000..6c80a51f3a --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_NUCLEO_C031C6.h @@ -0,0 +1,153 @@ +/* + ******************************************************************************* + * Copyright (c) 2022, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ + +// CN9 +#define PB7 0 +#define PB6 1 +#define PA10 2 +#define PB3 3 +#define PB10 PIN_A16 +#define PB4 5 +#define PB5 6 +#define PA15 7 + +// CN5 +#define PA9 8 +#define PC7 9 +#define PB0 PIN_A14 +#define PA7 PIN_A10 +#define PA6 PIN_A9 +#define PA5 PIN_A8 // LED +#define PB9 14 +#define PB8 15 + +// CN7 Left Side +#define PD0 16 +#define PD2 17 +#define PA14 PIN_A13 +#define PA13 PIN_A12 +#define PC6 20 +#define PC13 21 // Button +#define PC14 22 // OSCX_IN +#define PF0 23 // OSC_IN +#define PF1 24 // OSC_OUT +#define PB11 PIN_A17 +#define PA2 PIN_A6 // VCP_TX + +// CN7 Right Side +#define PD1 27 + +// CN10 Left Side +#define PD3 28 +#define PC11 29 + +// CN8 Left Side +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA4 PIN_A2 +#define PB1 PIN_A3 +#define PA11 PIN_A4 +#define PA12 PIN_A5 + +// CN10 Right side +#define PA3 PIN_A7 // VCP_RX +#define PC15 37 // OSCX_OUT +#define PB12 PIN_A18 +#define PB2 PIN_A15 +#define PF3 40 +#define PA8 PIN_A11 +#define PB15 42 +#define PB14 43 +#define PB13 44 + +// Others +#define PF2 45 // NRST + + +#define NUM_DIGITAL_PINS 46 +#define NUM_ANALOG_INPUTS 19 + +// On-board LED pin number +#define LED_GREEN PA5 +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_GREEN +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PC13 +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PB9 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PB8 +#endif + +// Timer Definitions +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM17 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 2 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif From 55554606bfdf44b905aea3ebde547f2733bc51f3 Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Mon, 10 Jan 2022 17:13:21 +0100 Subject: [PATCH 23/23] variant(C0): Add support of Disco board STM32C0316-DK Note: SystemClock_Config() is based on LL API to spare Flash memory Signed-off-by: Alexandre Bourdiol --- README.md | 1 + boards.txt | 13 ++ .../C031C(4-6)(T-U)/variant_STM32C0316_DK.cpp | 97 +++++++++++++++ .../C031C(4-6)(T-U)/variant_STM32C0316_DK.h | 113 ++++++++++++++++++ 4 files changed, 224 insertions(+) create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.cpp create mode 100644 variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.h diff --git a/README.md b/README.md index 542ceadcc8..b189228a81 100644 --- a/README.md +++ b/README.md @@ -152,6 +152,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | +| :yellow_heart: | STM32C031C6 | [STM32C0316-DK](https://www.st.com/en/evaluation-tools/stm32c0316-dk.html) | **2.5.0** | | | :green_heart: | STM32F030R8 | [32F0308DISCOVERY](http://www.st.com/en/evaluation-tools/32f0308discovery.html) | *1.3.0* | | | :green_heart: | STM32F072RB | [32F072BDISCOVERY](https://www.st.com/en/evaluation-tools/32f072bdiscovery.html) | *1.5.0* | | | :green_heart: | STM32F100RB | [STM32VLDISCOVERY](https://www.st.com/en/evaluation-tools/stm32vldiscovery.html) | 0.2.1 | | diff --git a/boards.txt b/boards.txt index 82ddd11815..76f73cc5a2 100644 --- a/boards.txt +++ b/boards.txt @@ -883,6 +883,19 @@ Disco.menu.pnum.B_U585I_IOT02A.build.variant=STM32U5xx/U575A(G-I)IxQ_U585AIIxQ Disco.menu.pnum.B_U585I_IOT02A.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS Disco.menu.pnum.B_U585I_IOT02A.build.cmsis_lib_gcc=arm_ARMv8MMLlfsp_math +# STM32C0316-DK board +Disco.menu.pnum.STM32C0316_DK=STM32C0316-DK +Disco.menu.pnum.STM32C0316_DK.node="No_mass_storage_for_this_board_Use_STLink_upload_method" +Disco.menu.pnum.STM32C0316_DK.upload.maximum_size=32768 +Disco.menu.pnum.STM32C0316_DK.upload.maximum_data_size=12288 +Disco.menu.pnum.STM32C0316_DK.build.mcu=cortex-m0plus +Disco.menu.pnum.STM32C0316_DK.build.board=STM32C0316_DK +Disco.menu.pnum.STM32C0316_DK.build.series=STM32C0xx +Disco.menu.pnum.STM32C0316_DK.build.product_line=STM32C031xx +Disco.menu.pnum.STM32C0316_DK.build.variant=STM32C0xx/C031C(4-6)(T-U) +Disco.menu.pnum.STM32C0316_DK.build.cmsis_lib_gcc=arm_cortexM0l_math +Disco.menu.pnum.STM32C0316_DK.build.extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0 + # DISCO_F030R8 board Disco.menu.pnum.DISCO_F030R8=STM32F030R8-DISCVL Disco.menu.pnum.DISCO_F030R8.node="No_mass_storage_for_this_board_Use_STLink_upload_method" diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.cpp b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.cpp new file mode 100644 index 0000000000..a1a069b746 --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.cpp @@ -0,0 +1,97 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_STM32C0316_DK) +#include "pins_arduino.h" +#include "stm32yyxx_ll_utils.h" + +// Digital PinName array +const PinName digitalPin[] = { + + PA_3, // D0 + PA_2, // D1 + PC_6, // D2 + PC_7, // D3 + PA_0, // D4 + PD_0, // D5 + PD_1, // D6 + PD_2, // D7 + PD_3, // D8 + PA_8, // D9 + PB_0, // D10 + PA_7, // D11 + PA_6, // D12 + PA_1, // D13 + PA_4, // D14 + PA_5, // D15 + PA_10, // D16 + PA_9, // D17 + PB_11, // D18 + PB_10, // D19 + PB_6, // D20 + PB_7 // D21 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 14, // A4, + 15, // A5, + 16, // A0, + 17, // A1, + 18, // A2, + 19 // A3, +}; + +// ---------------------------------------------------------------------------- +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + LL_FLASH_SetLatency(LL_FLASH_LATENCY_1); + + /* HSI configuration and activation */ + LL_RCC_HSI_Enable(); + while (LL_RCC_HSI_IsReady() != 1) { + } + + LL_RCC_HSI_SetCalibTrimming(64); + LL_RCC_SetHSIDiv(LL_RCC_HSI_DIV_1); + /* Set AHB prescaler*/ + LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1); + + /* Sysclk activation on the HSI */ + LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI); + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) { + } + + /* Set APB1 prescaler*/ + LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1); + /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */ + LL_SetSystemCoreClock(48000000); + + /* Update the time base */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_STM32C0316_DK */ diff --git a/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.h b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.h new file mode 100644 index 0000000000..c9bf04a4a9 --- /dev/null +++ b/variants/STM32C0xx/C031C(4-6)(T-U)/variant_STM32C0316_DK.h @@ -0,0 +1,113 @@ +/* + ******************************************************************************* + * Copyright (c) 2022, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA3 0 +#define PA2 1 +#define PC6 2 +#define PC7 3 +#define PA0 4 +#define PD0 5 +#define PD1 6 +#define PD2 7 +#define PD3 8 +#define PA8 9 +#define PB0 10 +#define PA7 11 +#define PA6 12 +#define PA1 13 +#define PB10 A5 +#define PB11 A4 +#define PA4 A0 // Joystick +#define PA5 A1 // LED BLUE +#define PA10 A2 // SDA // No ADC capability, despite analog "A2" Silk mark on board +#define PA9 A3 // SCL // No ADC capability, despite analog "A3" Silk mark on board +#define PB6 20 // STM32_TX1 +#define PB7 21 // STM32_RX1 + + +#define NUM_DIGITAL_PINS 22 +#define NUM_ANALOG_INPUTS 6 + +// On-board LED pin number +#define LED_GREEN PA5 +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_GREEN +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PA4 +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9 +#endif + +// Timer Definitions +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM17 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PB7 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PB6 +#endif + + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif