OP-Stack + Sunrise OP DA Server

Sunrise's Data Availability Layer supports Layer 2 blockchains created using OP Stack This is a guide to connecting an L2 chain created using OP Stack to Sunrise chain with Sunrise OP DA Server. Data Availability layer is supported in Sunrise v0.3.0 and later.

How to set up OP Stack

As an example, here is how to use OP Stack to create an L2 chain for the Ethereum Sepolia testnet and run it on the Sunrise's Data Availability Layer.

sequenceDiagram
   autonumber
   L2 ->> Ethereum Sepolia: Send Tx (e.g. token transfer)
   Ethereum Sepolia --> L2: API & Tx Response
   L2 ->> Sunrise: Send Block Data and Save

Loading

Dependencies

Dependencies and general installation instructions for Ubuntu 22.04.

node

  curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash - && sudo apt-get install -y nodejs

pnpm

  curl -fsSL https://get.pnpm.io/install.sh | sh -

foundry

  curl -L https://foundry.paradigm.xyz | bash

just

  wget -qO - 'https://proget.makedeb.org/debian-feeds/prebuilt-mpr.pub' | gpg --dearmor | sudo tee /usr/share/keyrings/prebuilt-mpr-archive-keyring.gpg 1> /dev/null
  echo "deb [arch=all,$(dpkg --print-architecture) signed-by=/usr/share/keyrings/prebuilt-mpr-archive-keyring.gpg] https://proget.makedeb.org prebuilt-mpr $(lsb_release -cs)" | sudo tee /etc/apt/sources.list.d/prebuilt-mpr.list
  sudo apt update
  sudo apt install just

Set up Optimism Rollup Testnet

Optimism

Clone the optimism repo

git clone https://github.com/ethereum-optimism/optimism.git

Check out the correct branch
```
cd optimism
git checkout v1.9.1
```

Run the following to check you have all dependencies

./packages/contracts-bedrock/scripts/getting-started/versions.sh

Build all packages associated with Optimism
```
make op-node op-batcher op-proposer
```
If you are having issues with this step, make sure your versions match those in the optimism docs. Specifically, you may have to downgrade your go version to 1.21

Clone and build op-geth

cd ~
git clone https://github.com/ethereum-optimism/op-geth.git
cd op-geth
make geth

Fill out environment variables

cd ~/optimism
cp .envrc.example .envrc

Run the script to generate addresses with the following command in the optimism repo: ./packages/contracts-bedrock/scripts/getting-started/wallets.sh

The output will look like the following which will you need to paste into the environment file as well:

##################################################
#                 Getting Started                #
##################################################

# Admin account
export GS_ADMIN_ADDRESS=0x82eeB61600f290ce3F9400d345aAEcBe5faF7AEB
export GS_ADMIN_PRIVATE_KEY=0x7c726817d047ee62cbb060312fe2620ba5462495e34f7e8279ba22faa96bca20

# Batcher account
export GS_BATCHER_ADDRESS=0x7BECbC4C747922d92e4F917951D9D8c3Ada7eb60
export GS_BATCHER_PRIVATE_KEY=0xc7dfaa7b8449f00480196377da50d29318b2397fd0296d0ab4f11d48ee3cf723

# Proposer account
export GS_PROPOSER_ADDRESS=0x773F4527fECc889d6DD3Cd7d044F4AC1Ad765a31
export GS_PROPOSER_PRIVATE_KEY=0xed6029a5928e83c5d2a28d9574304bae9a825e19f7f18a50d34edc13b505afed

# Sequencer account
export GS_SEQUENCER_ADDRESS=0x2B43c41FCbabc5437A6E1B97F47cA085a4B16f61
export GS_SEQUENCER_PRIVATE_KEY=0x0a7d4ce467fe4d00b8930215c98335e06c16db34cd501c8c3f3173015487662e

##################################################
#                Chain Information               #
##################################################

# L1 chain information
export L1_CHAIN_ID=11155111
export L1_BLOCK_TIME=12

# L2 chain information
export L2_CHAIN_ID=42069
export L2_BLOCK_TIME=2

##################################################
#              op-node Configuration             #
##################################################

# The kind of RPC provider, used to inform optimal transactions receipts
# fetching. Valid options: alchemy, quicknode, infura, parity, nethermind,
# debug_geth, erigon, basic, any.
export L1_RPC_KIND=infura

##################################################
#               Contract Deployment              #
##################################################

# RPC URL for the L1 network to interact with
export L1_RPC_URL=https://sepolia.infura.io/v3/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

API key for RPC URL can be found in Infura or other providers.

Fund the addresses with enough Sepolia ETH, the optimism docs recommend the following:
- Admin — 0.5 Sepolia ETH
- Proposer — 0.2 Sepolia ETH
- Batcher — 0.1 Sepolia ETH
Ref: Sepolia PoW Faucet

Load environment variables with direnv direnv allow You should see something similar to this after:

    direnv: loading ~/optimism/.envrc                                                            direnv: export +DEPLOYMENT_CONTEXT +ETHERSCAN_API_KEY +GS_ADMIN_ADDRESS +GS_ADMIN_PRIVATE_KEY +GS_BATCHER_ADDRESS +GS_BATCHER_PRIVATE_KEY +GS_PROPOSER_ADDRESS +GS_PROPOSER_PRIVATE_KEY +GS_SEQUENCER_ADDRESS +GS_SEQUENCER_PRIVATE_KEY +IMPL_SALT +L1_RPC_KIND +L1_RPC_URL +PRIVATE_KEY +TENDERLY_PROJECT +TENDERLY_USERNAME

If you do not see any output, try

nano ~/.zshrc

nano ~/.bashrc

Add the following line depending on whether you use bash or zsh

eval "$(direnv hook zsh)"

eval "$(direnv hook bash)"

Save the changes with

source ~/.zshrc

source ~/.bashrc

Configure the network

cd ~/optimism/packages/contracts-bedrock
./scripts/getting-started/config.sh

You can view the config in the deploy-config/getting-started.json file Add the following at the bottom of the config generated

nano **deploy-config/getting-started.json**

...
  "preimageOracleMinProposalSize": 1800000,
  "preimageOracleChallengePeriod": 300,

  "useAltDA": true,
  "daCommitmentType": "GenericCommitment",
  "daChallengeWindow": 160,
  "daResolveWindow": 160,
  "daBondSize": 1000000,
  "daResolverRefundPercentage": 0
}

Deploy the L1 contracts

just install
DEPLOYMENT_OUTFILE=deployments/artifact.json \
DEPLOY_CONFIG_PATH=deploy-config/getting-started.json \
forge script scripts/deploy/Deploy.s.sol:Deploy \
--broadcast --private-key $GS_ADMIN_PRIVATE_KEY \
--rpc-url $L1_RPC_URL --slow

CONTRACT_ADDRESSES_PATH=deployments/artifact.json \
DEPLOY_CONFIG_PATH=deploy-config/getting-started.json \
STATE_DUMP_PATH=deploy-config/statedump.json \
forge script scripts/L2Genesis.s.sol:L2Genesis \
--sig 'runWithStateDump()' \
--chain 42069
## YOUR_L2_CHAINID

If you see a nondescript error that includes EvmError: Revert and Script failed then you likely need to change the IMPL_SALT environment variable. This variable determines the addresses of various smart contracts that are deployed via CREATE2(opens in a new tab). If the same IMPL_SALT is used to deploy the same contracts twice, the second deployment will fail. You can generate a new IMPL_SALT by running direnv allow anywhere in the Optimism Monorepo.

Generate the L2 config files

cd ~/optimism/op-node
./bin/op-node genesis l2 \
  --deploy-config ../packages/contracts-bedrock/deploy-config/getting-started.json \
  --l1-deployments ../packages/contracts-bedrock/deployments/artifact.json \
  --outfile.l2 genesis.json \
  --outfile.rollup rollup.json \
  --l1-rpc $L1_RPC_URL \
  --l2-allocs ../packages/contracts-bedrock/deploy-config/statedump.json

Check the end of the generated rollup.json

 "alt_da": {
    "da_challenge_contract_address": "0x0000000000000000000000000000000000000000",
    "da_commitment_type": "GenericCommitment",
    "da_challenge_window": 160,
    "da_resolve_window": 160
  }

Create an authentication key
```
openssl rand -hex 32 > jwt.txt
```

Copy genesis files into op-geth directory

cp genesis.json ~/op-geth
cp jwt.txt ~/op-geth

Initialize op-geth

cd ~/op-geth
mkdir datadir
make geth
build/bin/geth init --datadir=datadir genesis.json

Start L2

Before optimism start, set up sunrise & sunrise-op-da-server, etc.

Sunrise OP DA Server

Start op-geth

./build/bin/geth \
  --datadir ./datadir \
  --http \
  --http.corsdomain="*" \
  --http.vhosts="*" \
  --http.addr=0.0.0.0 \
  --http.port=9545 \
  --http.api=web3,debug,eth,txpool,net,engine \
  --ws \
  --ws.addr=0.0.0.0 \
  --ws.port=9546 \
  --ws.origins="*" \
  --ws.api=debug,eth,txpool,net,engine \
  --syncmode=full \
  --nodiscover \
  --maxpeers=0 \
  --networkid=42069 \
  --authrpc.vhosts="*" \
  --authrpc.addr=0.0.0.0 \
  --authrpc.port=9551 \
  --authrpc.jwtsecret=./jwt.txt \
  --rollup.disabletxpoolgossip=true

Start op-node

cd ~/optimism/op-node
./bin/op-node \
  --l2=http://localhost:9551 \
  --l2.jwt-secret=./jwt.txt \
  --sequencer.enabled \
  --sequencer.l1-confs=5 \
  --verifier.l1-confs=4 \
  --rollup.config=./rollup.json \
  --rpc.addr=0.0.0.0 \
  --rpc.port=8547 \
  --p2p.disable \
  --rpc.enable-admin \
  --p2p.sequencer.key=$GS_SEQUENCER_PRIVATE_KEY \
  --l1=$L1_RPC_URL \
  --l1.rpckind=$L1_RPC_KIND \
  --altda.enabled=true \
  --altda.da-server=http://localhost:8000 \
  --altda.da-service=true \
  --l1.beacon.ignore=true

--altda.da-server is your da-serer’s http URL

Start op-batcher

cd ~/optimism/op-batcher
./bin/op-batcher \
  --l2-eth-rpc=http://localhost:9545 \
  --rollup-rpc=http://localhost:8547 \
  --poll-interval=1s \
  --sub-safety-margin=6 \
  --num-confirmations=1 \
  --safe-abort-nonce-too-low-count=3 \
  --resubmission-timeout=30s \
  --rpc.addr=0.0.0.0 \
  --rpc.port=8548 \
  --rpc.enable-admin \
  --max-channel-duration=1 \
  --l1-eth-rpc=$L1_RPC_URL \
  --private-key=$GS_BATCHER_PRIVATE_KEY \
  --altda.enabled=true \
  --altda.da-service=true \
  --altda.da-server=http://localhost:8000

Start op-proposer

cd ~/optimism/op-proposer
./bin/op-proposer \
  --poll-interval=12s \
  --rpc.port=9560 \
  --rollup-rpc=http://localhost:8547 \
  --l2oo-address=$(cat ../packages/contracts-bedrock/deployments/42069-deploy.json | jq -r .L2OutputOracleProxy) \
  --private-key=$GS_PROPOSER_PRIVATE_KEY \
  --l1-eth-rpc=$L1_RPC_URL

Work

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

op-stack.md

op-stack.md

OP-Stack + Sunrise OP DA Server

How to set up OP Stack

Dependencies

Set up Optimism Rollup Testnet

Optimism

Start L2

Files

op-stack.md

Latest commit

History

op-stack.md

File metadata and controls

OP-Stack + Sunrise OP DA Server

How to set up OP Stack

Dependencies

Set up Optimism Rollup Testnet

Optimism

Start L2