You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hello, I have a problem adding the driver. (As per instructions from https://github.com/xCuri0/ReBarUEFI/wiki/Adding-FFS-module).
The search in the UEFITool doesn't spit out anything and I can't find an entry for DXEdriver either -.- Has anyone managed to do it successfully on a Gigabyte Z390 Gaming X v1.0? If so, I would be grateful for step-by-step instructions.
My system:
MB: Gigabyte Z390 Gaming X
GC: MSI RTX 2080 Gaming X Trio (MS-V372)
Okay, update:
I found it and added it successfully.
Now I wanted to flash the new BIOS in the BIOS using Qflash.
Unfortunately, it says "invalid BIOS". Now my question is:
I have now created a bootable stick with the modified Efiflash (according to the instructions for Gigabyte https://github.com/xCuri0/ReBarUEFI/wiki/Flashing-modified-UEFI). Can I flash without any problems? I have a dual BIOS and hope that the BIOS backup will take effect if it fails.
### update2:
Unfortunately, flashing with the modified Efiflash didn't work.
I used FPT-Flash for this in case anyone else has the problem.
It is important to mention that FPT-Flash overwrites the BIOS without regard to losses, even if it is a BIOS from a different motherboard.
Conclusion: with FPT-Flash (Win64 version v12) it worked without any problems. Perhaps it should be added to the list of problems.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hello, I have a problem adding the driver. (As per instructions from https://github.com/xCuri0/ReBarUEFI/wiki/Adding-FFS-module).
The search in the UEFITool doesn't spit out anything and I can't find an entry for DXEdriver either -.- Has anyone managed to do it successfully on a Gigabyte Z390 Gaming X v1.0? If so, I would be grateful for step-by-step instructions.
My system:
MB: Gigabyte Z390 Gaming X
GC: MSI RTX 2080 Gaming X Trio (MS-V372)
Okay, update:
I found it and added it successfully.
Now I wanted to flash the new BIOS in the BIOS using Qflash.
Unfortunately, it says "invalid BIOS". Now my question is:
I have now created a bootable stick with the modified Efiflash (according to the instructions for Gigabyte https://github.com/xCuri0/ReBarUEFI/wiki/Flashing-modified-UEFI). Can I flash without any problems? I have a dual BIOS and hope that the BIOS backup will take effect if it fails.
### update2:
Unfortunately, flashing with the modified Efiflash didn't work.
I used FPT-Flash for this in case anyone else has the problem.
It is important to mention that FPT-Flash overwrites the BIOS without regard to losses, even if it is a BIOS from a different motherboard.
Conclusion: with FPT-Flash (Win64 version v12) it worked without any problems. Perhaps it should be added to the list of problems.
Beta Was this translation helpful? Give feedback.
All reactions