diff --git a/revdep/README.md b/revdep/README.md
index 42947644a..2a5a1df1d 100644
--- a/revdep/README.md
+++ b/revdep/README.md
@@ -1,46 +1,70 @@
# Revdeps
-## Failed to check (39)
+## Failed to check (46)
-|package |version |error |warning |note |
-|:------------|:-------|:-----|:-------|:----|
-|airt |? | | | |
-|andurinha |? | | | |
-|biscale |? | | | |
-|cat2cat |? | | | |
-|CB2 |? | | | |
-|comperes |? | | | |
-|coxed |? | | | |
-|cpr |? | | | |
-|datawizard |? | | | |
-|dexterMST |? | | | |
-|dimRed |? | | | |
-|diseq |? | | | |
-|eechidna |? | | | |
-|eurostat |? | | | |
-|explor |? | | | |
-|fitzRoy |? | | | |
-|fixerapi |? | | | |
-|fmriqa |? | | | |
-|ftExtra |? | | | |
-|geofi |? | | | |
-|metagam |? | | | |
-|OncoBayes2 |? | | | |
-|PupilPre |? | | | |
-|rabhit |? | | | |
-|Radviz |? | | | |
-|RavenR |? | | | |
-|raw |? | | | |
-|Rilostat |? | | | |
-|RKorAPClient |? | | | |
-|rmdcev |1.2.4 |1 | | |
-|RtutoR |? | | | |
-|scoper |? | | | |
-|SCORPIUS |? | | | |
-|SimBIID |? | | | |
-|tigger |? | | | |
-|tinyarray |? | | | |
-|vivid |? | | | |
-|wrswoR |? | | | |
-|XPolaris |? | | | |
+|package |version |error |warning |note |
+|:--------------|:-------|:-----|:-------|:----|
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|CB2 |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|DAISIE |? | | | |
+|NA |? | | | |
+|diceR |? | | | |
+|dimRed |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|ecocomDP |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|NA |? | | | |
+|idiogramFISH |? | | | |
+|NA |? | | | |
+|isotracer |1.0.4 |1 | | |
+|NA |? | | | |
+|loon.ggplot |? | | | |
+|NA |? | | | |
+|MarketMatching |? | | | |
+|NA |? | | | |
+|multinma |0.3.0 |1 | | |
+|nodeSub |? | | | |
+|occCite |? | | | |
+|phyr |? | | | |
+|Platypus |? | | | |
+|pmc |? | | | |
+|raw |? | | | |
+|NA |? | | | |
+|RevGadgets |? | | | |
+|rmdcev |1.2.4 |1 | | |
+|RNeXML |? | | | |
+|rnoaa |? | | | |
+|scoper |? | | | |
+|NA |? | | | |
+|tigger |? | | | |
+|tinyarray |? | | | |
+|vivid |? | | | |
+|wrswoR |? | | | |
+
+## New problems (12)
+
+|package |version |error |warning |note |
+|:----------------------------------------------|:-------|:--------|:-------|:----|
+|[causact](problems.md#causact) |0.4.0 |__+1__ | | |
+|[crosstable](problems.md#crosstable) |0.2.2 |1 __+1__ | | |
+|[DSSAT](problems.md#dssat) |0.0.4 |__+1__ | | |
+|[heuristicsmineR](problems.md#heuristicsminer) |0.2.5 |__+1__ | |1 |
+|[processanimateR](problems.md#processanimater) |1.0.4 |__+1__ | |1 |
+|[RavenR](problems.md#ravenr) |2.1.4 |__+1__ | |1 |
+|[REddyProc](problems.md#reddyproc) |1.3.0 |__+1__ | | |
+|[tidygate](problems.md#tidygate) |0.4.7 |__+1__ | | |
+|[tidytidbits](problems.md#tidytidbits) |0.2.3 |__+1__ | | |
+|[Tplyr](problems.md#tplyr) |0.4.2 |__+1__ | | |
+|[wpa](problems.md#wpa) |1.6.2 |__+1__ | | |
+|[xml2relational](problems.md#xml2relational) |0.1.0 |__+1__ | | |
diff --git a/revdep/cran.md b/revdep/cran.md
index ad4ffead8..cb3c0fe8e 100644
--- a/revdep/cran.md
+++ b/revdep/cran.md
@@ -1,50 +1,75 @@
## revdepcheck results
-We checked 1210 reverse dependencies, comparing R CMD check results across CRAN and dev versions of this package.
+We checked 1391 reverse dependencies (1370 from CRAN + 21 from Bioconductor), comparing R CMD check results across CRAN and dev versions of this package.
- * We saw 0 new problems
- * We failed to check 39 packages
+ * We saw 12 new problems
+ * We failed to check 25 packages
Issues with CRAN packages are summarised below.
+### New problems
+(This reports the first line of each new failure)
+
+* causact
+ checking examples ... ERROR
+
+* crosstable
+ checking tests ... ERROR
+
+* DSSAT
+ checking examples ... ERROR
+
+* heuristicsmineR
+ checking examples ... ERROR
+
+* processanimateR
+ checking examples ... ERROR
+
+* RavenR
+ checking examples ... ERROR
+
+* REddyProc
+ checking examples ... ERROR
+
+* tidygate
+ checking examples ... ERROR
+
+* tidytidbits
+ checking examples ... ERROR
+
+* Tplyr
+ checking tests ... ERROR
+
+* wpa
+ checking examples ... ERROR
+
+* xml2relational
+ checking examples ... ERROR
+
### Failed to check
-* airt (NA)
-* andurinha (NA)
-* biscale (NA)
-* cat2cat (NA)
-* CB2 (NA)
-* comperes (NA)
-* coxed (NA)
-* cpr (NA)
-* datawizard (NA)
-* dexterMST (NA)
-* dimRed (NA)
-* diseq (NA)
-* eechidna (NA)
-* eurostat (NA)
-* explor (NA)
-* fitzRoy (NA)
-* fixerapi (NA)
-* fmriqa (NA)
-* ftExtra (NA)
-* geofi (NA)
-* metagam (NA)
-* OncoBayes2 (NA)
-* PupilPre (NA)
-* rabhit (NA)
-* Radviz (NA)
-* RavenR (NA)
-* raw (NA)
-* Rilostat (NA)
-* RKorAPClient (NA)
-* rmdcev (NA)
-* RtutoR (NA)
-* scoper (NA)
-* SCORPIUS (NA)
-* SimBIID (NA)
-* tigger (NA)
-* tinyarray (NA)
-* vivid (NA)
-* wrswoR (NA)
-* XPolaris (NA)
+* CB2 (NA)
+* DAISIE (NA)
+* diceR (NA)
+* dimRed (NA)
+* ecocomDP (NA)
+* idiogramFISH (NA)
+* isotracer (NA)
+* loon.ggplot (NA)
+* MarketMatching (NA)
+* multinma (NA)
+* nodeSub (NA)
+* occCite (NA)
+* phyr (NA)
+* Platypus (NA)
+* pmc (NA)
+* raw (NA)
+* RevGadgets (NA)
+* rmdcev (NA)
+* RNeXML (NA)
+* rnoaa (NA)
+* scoper (NA)
+* tigger (NA)
+* tinyarray (NA)
+* vivid (NA)
+* wrswoR (NA)
diff --git a/revdep/failures.md b/revdep/failures.md
index 9958c21f1..0210dc571 100644
--- a/revdep/failures.md
+++ b/revdep/failures.md
@@ -1,14 +1,13 @@
-# airt
+# NA
-* Version: 0.2.0
+* Version: NA
* GitHub: NA
-* Source code: https://github.com/cran/airt
-* Date/Publication: 2020-11-23 10:50:22 UTC
-* Number of recursive dependencies: 79
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "airt")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -17,25 +16,7 @@ Run `cloud_details(, "airt")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/airt/new/airt.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘airt/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘airt’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘EstCRM’
-Package suggested but not available for checking: ‘ggplot2’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -45,42 +26,23 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/airt/old/airt.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘airt/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘airt’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘EstCRM’
-
-Package suggested but not available for checking: ‘ggplot2’
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
```
-# andurinha
+# NA
-* Version: 0.0.2
-* GitHub: https://github.com/noemiallefs/andurinha
-* Source code: https://github.com/cran/andurinha
-* Date/Publication: 2020-08-13 08:40:02 UTC
-* Number of recursive dependencies: 71
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "andurinha")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -89,25 +51,7 @@ Run `cloud_details(, "andurinha")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/andurinha/new/andurinha.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘andurinha/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘andurinha’ version ‘0.0.2’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'ggplot2', 'cowplot'
-
-Package suggested but not available for checking: ‘testthat’
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -117,42 +61,23 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/andurinha/old/andurinha.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘andurinha/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘andurinha’ version ‘0.0.2’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'ggplot2', 'cowplot'
-Package suggested but not available for checking: ‘testthat’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
```
-# biscale
+# NA
-* Version: 0.2.0
-* GitHub: https://github.com/slu-openGIS/biscale
-* Source code: https://github.com/cran/biscale
-* Date/Publication: 2020-05-06 05:20:03 UTC
-* Number of recursive dependencies: 84
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "biscale")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -161,27 +86,7 @@ Run `cloud_details(, "biscale")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/biscale/new/biscale.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘biscale/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘biscale’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking data for non-ASCII characters ... OK
-* checking data for ASCII and uncompressed saves ... OK
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* DONE
-Status: 1 WARNING
+
@@ -191,44 +96,23 @@ Status: 1 WARNING
### CRAN
```
-* using log directory ‘/tmp/workdir/biscale/old/biscale.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘biscale/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘biscale’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking data for non-ASCII characters ... OK
-* checking data for ASCII and uncompressed saves ... OK
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* DONE
-Status: 1 WARNING
+
```
-# cat2cat
+# NA
-* Version: 0.2.1
-* GitHub: https://github.com/Polkas/cat2cat
-* Source code: https://github.com/cran/cat2cat
-* Date/Publication: 2021-03-27 02:50:02 UTC
-* Number of recursive dependencies: 102
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "cat2cat")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -237,24 +121,7 @@ Run `cloud_details(, "cat2cat")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/cat2cat/new/cat2cat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘cat2cat/DESCRIPTION’ ... OK
-* this is package ‘cat2cat’ version ‘0.2.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘caret’
-Package suggested but not available for checking: ‘testthat’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -264,24 +131,7 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/cat2cat/old/cat2cat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘cat2cat/DESCRIPTION’ ... OK
-* this is package ‘cat2cat’ version ‘0.2.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘caret’
-Package suggested but not available for checking: ‘testthat’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -296,7 +146,7 @@ Status: 1 ERROR
* GitHub: NA
* Source code: https://github.com/cran/CB2
* Date/Publication: 2020-07-24 09:42:24 UTC
-* Number of recursive dependencies: 105
+* Number of recursive dependencies: 133
Run `cloud_details(, "CB2")` for more info
@@ -356,17 +206,16 @@ Status: 1 ERROR
```
-# comperes
+# NA
-* Version: 0.2.5
-* GitHub: https://github.com/echasnovski/comperes
-* Source code: https://github.com/cran/comperes
-* Date/Publication: 2020-11-23 21:20:02 UTC
-* Number of recursive dependencies: 58
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "comperes")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -375,27 +224,7 @@ Run `cloud_details(, "comperes")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/comperes/new/comperes.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘comperes/DESCRIPTION’ ... OK
-* this is package ‘comperes’ version ‘0.2.5’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘formats.Rmd’ using ‘UTF-8’... OK
- ‘manipulation.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
@@ -405,44 +234,23 @@ Status: 1 ERROR, 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/comperes/old/comperes.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘comperes/DESCRIPTION’ ... OK
-* this is package ‘comperes’ version ‘0.2.5’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘formats.Rmd’ using ‘UTF-8’... OK
- ‘manipulation.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
```
-# coxed
+# NA
-* Version: 0.3.3
-* GitHub: https://github.com/jkropko/coxed
-* Source code: https://github.com/cran/coxed
-* Date/Publication: 2020-08-02 01:20:07 UTC
-* Number of recursive dependencies: 95
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "coxed")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -451,23 +259,7 @@ Run `cloud_details(, "coxed")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/coxed/new/coxed.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘coxed/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘coxed’ version ‘0.3.3’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘mediation’
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -477,40 +269,23 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/coxed/old/coxed.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘coxed/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘coxed’ version ‘0.3.3’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘mediation’
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
```
-# cpr
+# NA
-* Version: 0.2.3
-* GitHub: https://github.com/dewittpe/cpr
-* Source code: https://github.com/cran/cpr
-* Date/Publication: 2017-03-07 13:41:34
-* Number of recursive dependencies: 88
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "cpr")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -519,27 +294,7 @@ Run `cloud_details(, "cpr")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/cpr/new/cpr.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘cpr/DESCRIPTION’ ... OK
-* this is package ‘cpr’ version ‘0.2.3’
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-Package suggested but not available for checking: ‘rmarkdown’
-...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘cpr-pkg.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 2 NOTEs
+
@@ -549,44 +304,23 @@ Status: 2 NOTEs
### CRAN
```
-* using log directory ‘/tmp/workdir/cpr/old/cpr.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘cpr/DESCRIPTION’ ... OK
-* this is package ‘cpr’ version ‘0.2.3’
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-Package suggested but not available for checking: ‘rmarkdown’
-...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘cpr-pkg.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 2 NOTEs
+
```
-# datawizard
+# NA
-* Version: 0.2.0.1
-* GitHub: https://github.com/easystats/datawizard
-* Source code: https://github.com/cran/datawizard
-* Date/Publication: 2021-09-02 21:10:21 UTC
-* Number of recursive dependencies: 143
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "datawizard")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -595,27 +329,7 @@ Run `cloud_details(, "datawizard")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/datawizard/new/datawizard.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘datawizard/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘datawizard’ version ‘0.2.0.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘demean.Rmd’ using ‘UTF-8’... OK
- ‘standardize_data.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
@@ -625,44 +339,24 @@ Status: 1 ERROR, 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/datawizard/old/datawizard.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘datawizard/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘datawizard’ version ‘0.2.0.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘demean.Rmd’ using ‘UTF-8’... OK
- ‘standardize_data.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
```
-# dexterMST
+# DAISIE
-* Version: 0.9.2
-* GitHub: https://github.com/jessekps/dexter
-* Source code: https://github.com/cran/dexterMST
-* Date/Publication: 2021-01-07 04:20:02 UTC
-* Number of recursive dependencies: 84
+* Version: 3.0.1
+* GitHub: NA
+* Source code: https://github.com/cran/DAISIE
+* Date/Publication: 2020-08-26 10:00:07 UTC
+* Number of recursive dependencies: 112
-Run `cloud_details(, "dexterMST")` for more info
+Run `cloud_details(, "DAISIE")` for more info
@@ -671,22 +365,22 @@ Run `cloud_details(, "dexterMST")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/dexterMST/new/dexterMST.Rcheck’
+* using log directory ‘/tmp/workdir/DAISIE/new/DAISIE.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘dexterMST/DESCRIPTION’ ... OK
+* checking for file ‘DAISIE/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘dexterMST’ version ‘0.9.2’
+* this is package ‘DAISIE’ version ‘3.0.1’
* package encoding: UTF-8
* checking package namespace information ... OK
...
+Package required but not available: ‘DDD’
-Packages suggested but not available for checking:
- 'knitr', 'rmarkdown', 'testthat', 'ggplot2'
+Packages suggested but not available for checking: 'ggtree', 'phytools'
-VignetteBuilder package required for checking but not installed: ‘knitr’
+Package which this enhances but not available for checking: ‘doMC’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -701,22 +395,22 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/dexterMST/old/dexterMST.Rcheck’
+* using log directory ‘/tmp/workdir/DAISIE/old/DAISIE.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘dexterMST/DESCRIPTION’ ... OK
+* checking for file ‘DAISIE/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘dexterMST’ version ‘0.9.2’
+* this is package ‘DAISIE’ version ‘3.0.1’
* package encoding: UTF-8
* checking package namespace information ... OK
...
+Package required but not available: ‘DDD’
-Packages suggested but not available for checking:
- 'knitr', 'rmarkdown', 'testthat', 'ggplot2'
+Packages suggested but not available for checking: 'ggtree', 'phytools'
-VignetteBuilder package required for checking but not installed: ‘knitr’
+Package which this enhances but not available for checking: ‘doMC’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -728,17 +422,16 @@ Status: 1 ERROR
```
-# dimRed
+# NA
-* Version: 0.2.3
-* GitHub: https://github.com/gdkrmr/dimRed
-* Source code: https://github.com/cran/dimRed
-* Date/Publication: 2019-05-08 08:10:07 UTC
-* Number of recursive dependencies: 130
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "dimRed")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -747,27 +440,7 @@ Run `cloud_details(, "dimRed")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/dimRed/new/dimRed.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘dimRed/DESCRIPTION’ ... OK
-* this is package ‘dimRed’ version ‘0.2.3’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
-
- Error: Test failures
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘dimensionality-reduction.Rnw’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 2 ERRORs, 2 NOTEs
+
@@ -777,44 +450,24 @@ Status: 2 ERRORs, 2 NOTEs
### CRAN
```
-* using log directory ‘/tmp/workdir/dimRed/old/dimRed.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘dimRed/DESCRIPTION’ ... OK
-* this is package ‘dimRed’ version ‘0.2.3’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
-
- Error: Test failures
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘dimensionality-reduction.Rnw’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 2 ERRORs, 2 NOTEs
+
```
-# diseq
+# diceR
-* Version: 0.3.1
-* GitHub: https://github.com/pi-kappa-devel/diseq
-* Source code: https://github.com/cran/diseq
-* Date/Publication: 2021-05-12 00:52:27 UTC
-* Number of recursive dependencies: 116
+* Version: 1.1.0
+* GitHub: https://github.com/AlineTalhouk/diceR
+* Source code: https://github.com/cran/diceR
+* Date/Publication: 2021-07-23 19:30:01 UTC
+* Number of recursive dependencies: 152
-Run `cloud_details(, "diseq")` for more info
+Run `cloud_details(, "diceR")` for more info
@@ -823,19 +476,18 @@ Run `cloud_details(, "diseq")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/diseq/new/diseq.Rcheck’
+* using log directory ‘/tmp/workdir/diceR/new/diceR.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘diseq/DESCRIPTION’ ... OK
-* this is package ‘diseq’ version ‘0.3.1’
+* checking for file ‘diceR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘diceR’ version ‘1.1.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Package required but not available: ‘systemfit’
-
-Packages suggested but not available for checking: 'ggplot2', 'testthat'
+Package required but not available: ‘NMF’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -850,19 +502,18 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/diseq/old/diseq.Rcheck’
+* using log directory ‘/tmp/workdir/diceR/old/diceR.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘diseq/DESCRIPTION’ ... OK
-* this is package ‘diseq’ version ‘0.3.1’
+* checking for file ‘diceR/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘diceR’ version ‘1.1.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Package required but not available: ‘systemfit’
-
-Packages suggested but not available for checking: 'ggplot2', 'testthat'
+Package required but not available: ‘NMF’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -874,17 +525,17 @@ Status: 1 ERROR
```
-# eechidna
+# dimRed
-* Version: 1.4.1
-* GitHub: https://github.com/jforbes14/eechidna
-* Source code: https://github.com/cran/eechidna
-* Date/Publication: 2021-02-25 12:20:02 UTC
-* Number of recursive dependencies: 146
+* Version: 0.2.3
+* GitHub: https://github.com/gdkrmr/dimRed
+* Source code: https://github.com/cran/dimRed
+* Date/Publication: 2019-05-08 08:10:07 UTC
+* Number of recursive dependencies: 130
-Run `cloud_details(, "eechidna")` for more info
+Run `cloud_details(, "dimRed")` for more info
@@ -893,27 +544,27 @@ Run `cloud_details(, "eechidna")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/eechidna/new/eechidna.Rcheck’
+* using log directory ‘/tmp/workdir/dimRed/new/dimRed.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘eechidna/DESCRIPTION’ ... OK
-* this is package ‘eechidna’ version ‘1.4.1’
+* checking for file ‘dimRed/DESCRIPTION’ ... OK
+* this is package ‘dimRed’ version ‘0.2.3’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... NOTE
...
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
+
+ Error: Test failures
Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... NONE
- ‘eechidna-intro.Rmd’ using ‘UTF-8’... OK
+ ‘dimensionality-reduction.Rnw’ using ‘UTF-8’... OK
* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR, 1 NOTE
+Status: 2 ERRORs, 2 NOTEs
@@ -923,44 +574,43 @@ Status: 1 ERROR, 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/eechidna/old/eechidna.Rcheck’
+* using log directory ‘/tmp/workdir/dimRed/old/dimRed.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘eechidna/DESCRIPTION’ ... OK
-* this is package ‘eechidna’ version ‘1.4.1’
+* checking for file ‘dimRed/DESCRIPTION’ ... OK
+* this is package ‘dimRed’ version ‘0.2.3’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... NOTE
...
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
+
+ Error: Test failures
Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... NONE
- ‘eechidna-intro.Rmd’ using ‘UTF-8’... OK
+ ‘dimensionality-reduction.Rnw’ using ‘UTF-8’... OK
* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR, 1 NOTE
+Status: 2 ERRORs, 2 NOTEs
```
-# eurostat
+# NA
-* Version: 3.7.5
-* GitHub: https://github.com/ropengov/eurostat
-* Source code: https://github.com/cran/eurostat
-* Date/Publication: 2021-05-14 15:50:02 UTC
-* Number of recursive dependencies: 141
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "eurostat")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -969,27 +619,7 @@ Run `cloud_details(, "eurostat")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/eurostat/new/eurostat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘eurostat/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘eurostat’ version ‘3.7.5’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking package dependencies ... ERROR
-Packages required but not available: 'broom', 'readr'
-Packages suggested but not available for checking:
- 'covr', 'ggplot2', 'roxygen2', 'rvest', 'testthat', 'tmap', 'usethis'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -999,44 +629,23 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/eurostat/old/eurostat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘eurostat/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘eurostat’ version ‘3.7.5’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking package dependencies ... ERROR
-Packages required but not available: 'broom', 'readr'
-
-Packages suggested but not available for checking:
- 'covr', 'ggplot2', 'roxygen2', 'rvest', 'testthat', 'tmap', 'usethis'
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
```
-# explor
+# NA
-* Version: 0.3.9
-* GitHub: https://github.com/juba/explor
-* Source code: https://github.com/cran/explor
-* Date/Publication: 2021-06-01 09:50:15 UTC
-* Number of recursive dependencies: 157
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "explor")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1045,27 +654,7 @@ Run `cloud_details(, "explor")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/explor/new/explor.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘explor/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘explor’ version ‘0.3.9’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking package dependencies ... ERROR
-Packages required but not available: 'shiny', 'ggplot2'
-Packages suggested but not available for checking:
- 'FactoMineR', 'GDAtools', 'testthat'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -1075,44 +664,23 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/explor/old/explor.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘explor/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘explor’ version ‘0.3.9’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking package dependencies ... ERROR
-Packages required but not available: 'shiny', 'ggplot2'
-
-Packages suggested but not available for checking:
- 'FactoMineR', 'GDAtools', 'testthat'
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
```
-# fitzRoy
+# NA
-* Version: 1.0.0
-* GitHub: https://github.com/jimmyday12/fitzRoy
-* Source code: https://github.com/cran/fitzRoy
-* Date/Publication: 2021-03-16 05:30:03 UTC
-* Number of recursive dependencies: 95
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "fitzRoy")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1121,27 +689,7 @@ Run `cloud_details(, "fitzRoy")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/fitzRoy/new/fitzRoy.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fitzRoy/DESCRIPTION’ ... OK
-* this is package ‘fitzRoy’ version ‘1.0.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- ‘docker-support.Rmd’ using ‘UTF-8’... OK
- ‘elo-ratings-example.Rmd’ using ‘UTF-8’... OK
- ‘fitzRoy.Rmd’ using ‘UTF-8’... OK
- ‘main-fetch-functions.Rmd’ using ‘UTF-8’... OK
- ‘using-fryzigg-stats.Rmd’ using ‘UTF-8’... OK
- ‘using-squiggle-api.Rmd’ using ‘UTF-8’... OK
- ‘womens-stats.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
@@ -1151,44 +699,24 @@ Status: 1 ERROR, 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/fitzRoy/old/fitzRoy.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fitzRoy/DESCRIPTION’ ... OK
-* this is package ‘fitzRoy’ version ‘1.0.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- ‘docker-support.Rmd’ using ‘UTF-8’... OK
- ‘elo-ratings-example.Rmd’ using ‘UTF-8’... OK
- ‘fitzRoy.Rmd’ using ‘UTF-8’... OK
- ‘main-fetch-functions.Rmd’ using ‘UTF-8’... OK
- ‘using-fryzigg-stats.Rmd’ using ‘UTF-8’... OK
- ‘using-squiggle-api.Rmd’ using ‘UTF-8’... OK
- ‘womens-stats.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
```
-# fixerapi
+# ecocomDP
-* Version: 0.1.6
-* GitHub: https://github.com/evanodell/fixerapi
-* Source code: https://github.com/cran/fixerapi
-* Date/Publication: 2018-08-23 10:14:25 UTC
-* Number of recursive dependencies: 58
+* Version: 1.2.0
+* GitHub: https://github.com/EDIorg/ecocomDP
+* Source code: https://github.com/cran/ecocomDP
+* Date/Publication: 2021-10-18 22:50:05 UTC
+* Number of recursive dependencies: 155
-Run `cloud_details(, "fixerapi")` for more info
+Run `cloud_details(, "ecocomDP")` for more info
@@ -1197,24 +725,24 @@ Run `cloud_details(, "fixerapi")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/fixerapi/new/fixerapi.Rcheck’
+* using log directory ‘/tmp/workdir/ecocomDP/new/ecocomDP.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fixerapi/DESCRIPTION’ ... OK
-* this is package ‘fixerapi’ version ‘0.1.6’
+* checking for file ‘ecocomDP/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘ecocomDP’ version ‘1.2.0’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... NOTE
...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... NONE
- ‘introduction.Rmd’ using ‘UTF-8’... OK
+ ‘convert.Rmd’ using ‘UTF-8’... OK
+ ‘create.Rmd’ using ‘UTF-8’... OK
+ ‘model_overview.Rmd’ using ‘UTF-8’... OK
+ ‘shared_practices_create.Rmd’ using ‘UTF-8’... OK
+ ‘use.Rmd’ using ‘UTF-8’... OK
* checking re-building of vignette outputs ... SKIPPED
* DONE
Status: 1 NOTE
@@ -1227,24 +755,24 @@ Status: 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/fixerapi/old/fixerapi.Rcheck’
+* using log directory ‘/tmp/workdir/ecocomDP/old/ecocomDP.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fixerapi/DESCRIPTION’ ... OK
-* this is package ‘fixerapi’ version ‘0.1.6’
+* checking for file ‘ecocomDP/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘ecocomDP’ version ‘1.2.0’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... NOTE
...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... NONE
- ‘introduction.Rmd’ using ‘UTF-8’... OK
+ ‘convert.Rmd’ using ‘UTF-8’... OK
+ ‘create.Rmd’ using ‘UTF-8’... OK
+ ‘model_overview.Rmd’ using ‘UTF-8’... OK
+ ‘shared_practices_create.Rmd’ using ‘UTF-8’... OK
+ ‘use.Rmd’ using ‘UTF-8’... OK
* checking re-building of vignette outputs ... SKIPPED
* DONE
Status: 1 NOTE
@@ -1254,17 +782,16 @@ Status: 1 NOTE
```
-# fmriqa
+# NA
-* Version: 0.3.0
-* GitHub: https://github.com/martin3141/fmriqa
-* Source code: https://github.com/cran/fmriqa
-* Date/Publication: 2018-02-19 15:59:01 UTC
-* Number of recursive dependencies: 90
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "fmriqa")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1273,27 +800,7 @@ Run `cloud_details(, "fmriqa")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/fmriqa/new/fmriqa.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fmriqa/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘fmriqa’ version ‘0.3.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking Rd contents ... OK
-* checking for unstated dependencies in examples ... OK
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* DONE
-Status: 1 WARNING
+
@@ -1303,44 +810,23 @@ Status: 1 WARNING
### CRAN
```
-* using log directory ‘/tmp/workdir/fmriqa/old/fmriqa.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘fmriqa/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘fmriqa’ version ‘0.3.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking Rd contents ... OK
-* checking for unstated dependencies in examples ... OK
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... OK
- Running ‘testthat.R’
-* DONE
-Status: 1 WARNING
+
```
-# ftExtra
+# NA
-* Version: 0.2.0
-* GitHub: https://github.com/atusy/ftExtra
-* Source code: https://github.com/cran/ftExtra
-* Date/Publication: 2021-03-28 12:40:02 UTC
-* Number of recursive dependencies: 62
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "ftExtra")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1349,27 +835,7 @@ Run `cloud_details(, "ftExtra")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/ftExtra/new/ftExtra.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘ftExtra/DESCRIPTION’ ... OK
-* this is package ‘ftExtra’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘format_columns.Rmd’ using ‘UTF-8’... OK
- ‘group-rows.Rmd’ using ‘UTF-8’... OK
- ‘transform-headers.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
@@ -1379,44 +845,23 @@ Status: 1 ERROR, 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/ftExtra/old/ftExtra.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘ftExtra/DESCRIPTION’ ... OK
-* this is package ‘ftExtra’ version ‘0.2.0’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘format_columns.Rmd’ using ‘UTF-8’... OK
- ‘group-rows.Rmd’ using ‘UTF-8’... OK
- ‘transform-headers.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 1 NOTE
+
```
-# geofi
+# NA
-* Version: 1.0.4
+* Version: NA
* GitHub: NA
-* Source code: https://github.com/cran/geofi
-* Date/Publication: 2021-08-18 21:50:15 UTC
-* Number of recursive dependencies: 121
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "geofi")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1425,27 +870,7 @@ Run `cloud_details(, "geofi")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/geofi/new/geofi.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘geofi/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘geofi’ version ‘1.0.4’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘geofi_datasets.Rmd’ using ‘UTF-8’... OK
- ‘geofi_joining_attribute_data.Rmd’ using ‘UTF-8’... OK
- ‘geofi_making_maps.Rmd’ using ‘UTF-8’... OK
- ‘geofi_spatial_analysis.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
-* DONE
-Status: 1 ERROR, 2 NOTEs
+
@@ -1455,44 +880,212 @@ Status: 1 ERROR, 2 NOTEs
### CRAN
```
-* using log directory ‘/tmp/workdir/geofi/old/geofi.Rcheck’
+
+
+
+
+
+
+```
+# idiogramFISH
+
+
+
+* Version: 2.0.6
+* GitHub: NA
+* Source code: https://github.com/cran/idiogramFISH
+* Date/Publication: 2021-09-30 12:00:02 UTC
+* Number of recursive dependencies: 193
+
+Run `cloud_details(, "idiogramFISH")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/idiogramFISH/new/idiogramFISH.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘geofi/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘geofi’ version ‘1.0.4’
+* checking for file ‘idiogramFISH/DESCRIPTION’ ... OK
+* this is package ‘idiogramFISH’ version ‘2.0.6’
* package encoding: UTF-8
* checking package namespace information ... OK
+* checking package dependencies ... NOTE
...
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... NONE
- ‘geofi_datasets.Rmd’ using ‘UTF-8’... OK
- ‘geofi_joining_attribute_data.Rmd’ using ‘UTF-8’... OK
- ‘geofi_making_maps.Rmd’ using ‘UTF-8’... OK
- ‘geofi_spatial_analysis.Rmd’ using ‘UTF-8’... OK
+ ‘AVignette.Rmd’ using ‘UTF-8’... OK
+ ‘index.Rmd’ using ‘UTF-8’... OK
* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR, 2 NOTEs
+Status: 1 NOTE
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/idiogramFISH/old/idiogramFISH.Rcheck’
+* using R version 4.0.3 (2020-10-10)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘idiogramFISH/DESCRIPTION’ ... OK
+* this is package ‘idiogramFISH’ version ‘2.0.6’
+* package encoding: UTF-8
+* checking package namespace information ... OK
+* checking package dependencies ... NOTE
+...
+* checking files in ‘vignettes’ ... OK
+* checking examples ... OK
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘AVignette.Rmd’ using ‘UTF-8’... OK
+ ‘index.Rmd’ using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
+* DONE
+Status: 1 NOTE
+
+
+
+
+
+```
+# NA
+
+
+
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
+
+Run `cloud_details(, "NA")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
```
-# metagam
+# isotracer
-* Version: 0.2.0
-* GitHub: https://github.com/Lifebrain/metagam
-* Source code: https://github.com/cran/metagam
-* Date/Publication: 2020-11-12 08:10:02 UTC
+* Version: 1.0.4
+* GitHub: NA
+* Source code: https://github.com/cran/isotracer
+* Date/Publication: 2021-09-27 08:50:02 UTC
* Number of recursive dependencies: 145
-Run `cloud_details(, "metagam")` for more info
+Run `cloud_details(, "isotracer")` for more info
+
+
+
+## In both
+
+* checking whether package ‘isotracer’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/isotracer/new/isotracer.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘isotracer’ ...
+** package ‘isotracer’ successfully unpacked and MD5 sums checked
+** using staged installation
+** libs
+
+
+g++ -std=gnu++14 -I"/opt/R/4.0.3/lib/R/include" -DNDEBUG -I"../inst/include" -I"/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src" -DBOOST_DISABLE_ASSERTS -DEIGEN_NO_DEBUG -DBOOST_MATH_OVERFLOW_ERROR_POLICY=errno_on_error -I'/opt/R/4.0.3/lib/R/site-library/BH/include' -I'/opt/R/4.0.3/lib/R/site-library/Rcpp/include' -I'/opt/R/4.0.3/lib/R/site-library/RcppEigen/include' -I'/opt/R/4.0.3/lib/R/site-library/StanHeaders/include' -I'/opt/R/4.0.3/lib/R/site-library/rstan/include' -I/usr/local/include -I'/opt/R/4.0.3/lib/R/site-library/RcppParallel/include' -D_REENTRANT -DSTAN_THREADS -fpic -g -O2 -c RcppExports.cpp -o RcppExports.o
+In file included from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/Core:397,
+ from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/Dense:1,
+ from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/RcppEigenForward.h:30,
+...
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/ProductEvaluators.h:35:90: required from ‘Eigen::internal::evaluator >::evaluator(const XprType&) [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Options = 0; Eigen::internal::evaluator >::XprType = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>, Eigen::Matrix, 0>]’
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/Product.h:132:22: required from ‘Eigen::internal::dense_product_base::operator const Scalar() const [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Option = 0; Eigen::internal::dense_product_base::Scalar = double]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:23:56: required from ‘double stan::mcmc::dense_e_metric::T(stan::mcmc::dense_e_point&) [with Model = model_networkModelMugen_namespace::model_networkModelMugen; BaseRNG = boost::random::additive_combine_engine, boost::random::linear_congruential_engine >]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:22:10: required from here
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/DenseCoeffsBase.h:55:30: warning: ignoring attributes on template argument ‘Eigen::internal::packet_traits::type’ {aka ‘__vector(2) double’} [-Wignored-attributes]
+g++: fatal error: Killed signal terminated program cc1plus
+compilation terminated.
+make: *** [/opt/R/4.0.3/lib/R/etc/Makeconf:179: stanExports_networkModelMugen.o] Error 1
+ERROR: compilation failed for package ‘isotracer’
+* removing ‘/tmp/workdir/isotracer/new/isotracer.Rcheck/isotracer’
+
+
+```
+### CRAN
+
+```
+* installing *source* package ‘isotracer’ ...
+** package ‘isotracer’ successfully unpacked and MD5 sums checked
+** using staged installation
+** libs
+
+
+g++ -std=gnu++14 -I"/opt/R/4.0.3/lib/R/include" -DNDEBUG -I"../inst/include" -I"/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src" -DBOOST_DISABLE_ASSERTS -DEIGEN_NO_DEBUG -DBOOST_MATH_OVERFLOW_ERROR_POLICY=errno_on_error -I'/opt/R/4.0.3/lib/R/site-library/BH/include' -I'/opt/R/4.0.3/lib/R/site-library/Rcpp/include' -I'/opt/R/4.0.3/lib/R/site-library/RcppEigen/include' -I'/opt/R/4.0.3/lib/R/site-library/StanHeaders/include' -I'/opt/R/4.0.3/lib/R/site-library/rstan/include' -I/usr/local/include -I'/opt/R/4.0.3/lib/R/site-library/RcppParallel/include' -D_REENTRANT -DSTAN_THREADS -fpic -g -O2 -c RcppExports.cpp -o RcppExports.o
+In file included from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/Core:397,
+ from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/Dense:1,
+ from /opt/R/4.0.3/lib/R/site-library/RcppEigen/include/RcppEigenForward.h:30,
+...
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/ProductEvaluators.h:35:90: required from ‘Eigen::internal::evaluator >::evaluator(const XprType&) [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Options = 0; Eigen::internal::evaluator >::XprType = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>, Eigen::Matrix, 0>]’
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/Product.h:132:22: required from ‘Eigen::internal::dense_product_base::operator const Scalar() const [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Option = 0; Eigen::internal::dense_product_base::Scalar = double]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:23:56: required from ‘double stan::mcmc::dense_e_metric::T(stan::mcmc::dense_e_point&) [with Model = model_networkModelMugen_namespace::model_networkModelMugen; BaseRNG = boost::random::additive_combine_engine, boost::random::linear_congruential_engine >]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:22:10: required from here
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/DenseCoeffsBase.h:55:30: warning: ignoring attributes on template argument ‘Eigen::internal::packet_traits::type’ {aka ‘__vector(2) double’} [-Wignored-attributes]
+g++: fatal error: Killed signal terminated program cc1plus
+compilation terminated.
+make: *** [/opt/R/4.0.3/lib/R/etc/Makeconf:179: stanExports_networkModelMugen.o] Error 1
+ERROR: compilation failed for package ‘isotracer’
+* removing ‘/tmp/workdir/isotracer/old/isotracer.Rcheck/isotracer’
+
+
+```
+# NA
+
+
+
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
+
+Run `cloud_details(, "NA")` for more info
@@ -1501,20 +1094,56 @@ Run `cloud_details(, "metagam")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/metagam/new/metagam.Rcheck’
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# loon.ggplot
+
+
+
+* Version: 1.3.0
+* GitHub: https://github.com/great-northern-diver/loon.ggplot
+* Source code: https://github.com/cran/loon.ggplot
+* Date/Publication: 2021-09-28 14:00:05 UTC
+* Number of recursive dependencies: 99
+
+Run `cloud_details(, "loon.ggplot")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/loon.ggplot/new/loon.ggplot.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘metagam/DESCRIPTION’ ... OK
+* checking for file ‘loon.ggplot/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘metagam’ version ‘0.2.0’
+* this is package ‘loon.ggplot’ version ‘1.3.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Package required but not available: ‘metap’
+Package required but not available: ‘loon’
-Package suggested but not available for checking: ‘multtest’
+Package suggested but not available for checking: ‘zenplots’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1529,20 +1158,20 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/metagam/old/metagam.Rcheck’
+* using log directory ‘/tmp/workdir/loon.ggplot/old/loon.ggplot.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘metagam/DESCRIPTION’ ... OK
+* checking for file ‘loon.ggplot/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘metagam’ version ‘0.2.0’
+* this is package ‘loon.ggplot’ version ‘1.3.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Package required but not available: ‘metap’
+Package required but not available: ‘loon’
-Package suggested but not available for checking: ‘multtest’
+Package suggested but not available for checking: ‘zenplots’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1554,17 +1183,16 @@ Status: 1 ERROR
```
-# OncoBayes2
+# NA
-* Version: 0.8-2
+* Version: NA
* GitHub: NA
-* Source code: https://github.com/cran/OncoBayes2
-* Date/Publication: 2021-09-14 10:10:02 UTC
-* Number of recursive dependencies: 91
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "OncoBayes2")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -1573,27 +1201,242 @@ Run `cloud_details(, "OncoBayes2")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/OncoBayes2/new/OncoBayes2.Rcheck’
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# MarketMatching
+
+
+
+* Version: 1.2.0
+* GitHub: NA
+* Source code: https://github.com/cran/MarketMatching
+* Date/Publication: 2021-01-08 20:10:02 UTC
+* Number of recursive dependencies: 67
+
+Run `cloud_details(, "MarketMatching")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/MarketMatching/new/MarketMatching.Rcheck’
+* using R version 4.0.3 (2020-10-10)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MarketMatching/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MarketMatching’ version ‘1.2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'CausalImpact', 'bsts', 'Boom'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+```
+### CRAN
+
+```
+* using log directory ‘/tmp/workdir/MarketMatching/old/MarketMatching.Rcheck’
+* using R version 4.0.3 (2020-10-10)
+* using platform: x86_64-pc-linux-gnu (64-bit)
+* using session charset: UTF-8
+* using options ‘--no-manual --no-build-vignettes’
+* checking for file ‘MarketMatching/DESCRIPTION’ ... OK
+* checking extension type ... Package
+* this is package ‘MarketMatching’ version ‘1.2.0’
+* checking package namespace information ... OK
+* checking package dependencies ... ERROR
+Packages required but not available: 'CausalImpact', 'bsts', 'Boom'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
+* DONE
+Status: 1 ERROR
+
+
+
+
+
+```
+# NA
+
+
+
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
+
+Run `cloud_details(, "NA")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+
+
+
+
+
+
+```
+### CRAN
+
+```
+
+
+
+
+
+
+```
+# multinma
+
+
+
+* Version: 0.3.0
+* GitHub: https://github.com/dmphillippo/multinma
+* Source code: https://github.com/cran/multinma
+* Date/Publication: 2021-03-18 14:00:03 UTC
+* Number of recursive dependencies: 134
+
+Run `cloud_details(, "multinma")` for more info
+
+
+
+## In both
+
+* checking whether package ‘multinma’ can be installed ... ERROR
+ ```
+ Installation failed.
+ See ‘/tmp/workdir/multinma/new/multinma.Rcheck/00install.out’ for details.
+ ```
+
+## Installation
+
+### Devel
+
+```
+* installing *source* package ‘multinma’ ...
+** package ‘multinma’ successfully unpacked and MD5 sums checked
+** using staged installation
+DIAGNOSTIC(S) FROM PARSER:
+Info: integer division implicitly rounds to integer. Found int division: nint / int_thin
+ Positive values rounded down, negative values rounded up or down in platform-dependent way.
+
+DIAGNOSTIC(S) FROM PARSER:
+Info: integer division implicitly rounds to integer. Found int division: nint / int_thin
+ Positive values rounded down, negative values rounded up or down in platform-dependent way.
+...
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/ProductEvaluators.h:35:90: required from ‘Eigen::internal::evaluator >::evaluator(const XprType&) [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Options = 0; Eigen::internal::evaluator >::XprType = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>, Eigen::Matrix, 0>]’
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/Product.h:132:22: required from ‘Eigen::internal::dense_product_base::operator const Scalar() const [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Option = 0; Eigen::internal::dense_product_base::Scalar = double]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:23:56: required from ‘double stan::mcmc::dense_e_metric::T(stan::mcmc::dense_e_point&) [with Model = model_binomial_1par_namespace::model_binomial_1par; BaseRNG = boost::random::additive_combine_engine, boost::random::linear_congruential_engine >]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:22:10: required from here
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/DenseCoeffsBase.h:55:30: warning: ignoring attributes on template argument ‘Eigen::internal::packet_traits::type’ {aka ‘__vector(2) double’} [-Wignored-attributes]
+g++: fatal error: Killed signal terminated program cc1plus
+compilation terminated.
+make: *** [/opt/R/4.0.3/lib/R/etc/Makeconf:179: stanExports_binomial_1par.o] Error 1
+ERROR: compilation failed for package ‘multinma’
+* removing ‘/tmp/workdir/multinma/new/multinma.Rcheck/multinma’
+
+
+```
+### CRAN
+
+```
+* installing *source* package ‘multinma’ ...
+** package ‘multinma’ successfully unpacked and MD5 sums checked
+** using staged installation
+DIAGNOSTIC(S) FROM PARSER:
+Info: integer division implicitly rounds to integer. Found int division: nint / int_thin
+ Positive values rounded down, negative values rounded up or down in platform-dependent way.
+
+DIAGNOSTIC(S) FROM PARSER:
+Info: integer division implicitly rounds to integer. Found int division: nint / int_thin
+ Positive values rounded down, negative values rounded up or down in platform-dependent way.
+...
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/ProductEvaluators.h:35:90: required from ‘Eigen::internal::evaluator >::evaluator(const XprType&) [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Options = 0; Eigen::internal::evaluator >::XprType = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>, Eigen::Matrix, 0>]’
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/Product.h:132:22: required from ‘Eigen::internal::dense_product_base::operator const Scalar() const [with Lhs = Eigen::Product, const Eigen::CwiseNullaryOp, const Eigen::Matrix >, const Eigen::Transpose > >, Eigen::Matrix, 0>; Rhs = Eigen::Matrix; int Option = 0; Eigen::internal::dense_product_base::Scalar = double]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:23:56: required from ‘double stan::mcmc::dense_e_metric::T(stan::mcmc::dense_e_point&) [with Model = model_binomial_1par_namespace::model_binomial_1par; BaseRNG = boost::random::additive_combine_engine, boost::random::linear_congruential_engine >]’
+/opt/R/4.0.3/lib/R/site-library/StanHeaders/include/src/stan/mcmc/hmc/hamiltonians/dense_e_metric.hpp:22:10: required from here
+/opt/R/4.0.3/lib/R/site-library/RcppEigen/include/Eigen/src/Core/DenseCoeffsBase.h:55:30: warning: ignoring attributes on template argument ‘Eigen::internal::packet_traits::type’ {aka ‘__vector(2) double’} [-Wignored-attributes]
+g++: fatal error: Killed signal terminated program cc1plus
+compilation terminated.
+make: *** [/opt/R/4.0.3/lib/R/etc/Makeconf:179: stanExports_binomial_1par.o] Error 1
+ERROR: compilation failed for package ‘multinma’
+* removing ‘/tmp/workdir/multinma/old/multinma.Rcheck/multinma’
+
+
+```
+# nodeSub
+
+
+
+* Version: 1.2
+* GitHub: https://github.com/thijsjanzen/nodeSub
+* Source code: https://github.com/cran/nodeSub
+* Date/Publication: 2021-09-30 08:30:02 UTC
+* Number of recursive dependencies: 238
+
+Run `cloud_details(, "nodeSub")` for more info
+
+
+
+## Error before installation
+
+### Devel
+
+```
+* using log directory ‘/tmp/workdir/nodeSub/new/nodeSub.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘OncoBayes2/DESCRIPTION’ ... OK
+* checking for file ‘nodeSub/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘OncoBayes2’ version ‘0.8-2’
+* this is package ‘nodeSub’ version ‘1.2’
* package encoding: UTF-8
* checking package namespace information ... OK
...
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘introduction.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
+Packages required but not available:
+ 'RPANDA', 'phangorn', 'DDD', 'geiger', 'babette', 'beastier',
+ 'mauricer'
+
+Packages suggested but not available for checking: 'phytools', 'TreeSim'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
* DONE
-Status: 1 ERROR, 3 NOTEs
+Status: 1 ERROR
@@ -1603,44 +1446,44 @@ Status: 1 ERROR, 3 NOTEs
### CRAN
```
-* using log directory ‘/tmp/workdir/OncoBayes2/old/OncoBayes2.Rcheck’
+* using log directory ‘/tmp/workdir/nodeSub/old/nodeSub.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘OncoBayes2/DESCRIPTION’ ... OK
+* checking for file ‘nodeSub/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘OncoBayes2’ version ‘0.8-2’
+* this is package ‘nodeSub’ version ‘1.2’
* package encoding: UTF-8
* checking package namespace information ... OK
...
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘introduction.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
+Packages required but not available:
+ 'RPANDA', 'phangorn', 'DDD', 'geiger', 'babette', 'beastier',
+ 'mauricer'
+
+Packages suggested but not available for checking: 'phytools', 'TreeSim'
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
* DONE
-Status: 1 ERROR, 3 NOTEs
+Status: 1 ERROR
```
-# PupilPre
+# occCite
-* Version: 0.6.2
-* GitHub: NA
-* Source code: https://github.com/cran/PupilPre
-* Date/Publication: 2020-03-10 05:20:02 UTC
-* Number of recursive dependencies: 72
+* Version: 0.5.1
+* GitHub: https://github.com/hannahlowens/occCite
+* Source code: https://github.com/cran/occCite
+* Date/Publication: 2021-11-01 16:00:05 UTC
+* Number of recursive dependencies: 174
-Run `cloud_details(, "PupilPre")` for more info
+Run `cloud_details(, "occCite")` for more info
@@ -1649,18 +1492,18 @@ Run `cloud_details(, "PupilPre")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/PupilPre/new/PupilPre.Rcheck’
+* using log directory ‘/tmp/workdir/occCite/new/occCite.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘PupilPre/DESCRIPTION’ ... OK
+* checking for file ‘occCite/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘PupilPre’ version ‘0.6.2’
+* this is package ‘occCite’ version ‘0.5.1’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'VWPre', 'shiny'
+Package required but not available: ‘taxize’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1675,18 +1518,18 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/PupilPre/old/PupilPre.Rcheck’
+* using log directory ‘/tmp/workdir/occCite/old/occCite.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘PupilPre/DESCRIPTION’ ... OK
+* checking for file ‘occCite/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘PupilPre’ version ‘0.6.2’
+* this is package ‘occCite’ version ‘0.5.1’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'VWPre', 'shiny'
+Package required but not available: ‘taxize’
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1698,17 +1541,17 @@ Status: 1 ERROR
```
-# rabhit
+# phyr
-* Version: 0.1.5
-* GitHub: NA
-* Source code: https://github.com/cran/rabhit
-* Date/Publication: 2020-07-11 22:40:02 UTC
-* Number of recursive dependencies: 128
+* Version: 1.1.0
+* GitHub: https://github.com/daijiang/phyr
+* Source code: https://github.com/cran/phyr
+* Date/Publication: 2020-12-18 07:30:05 UTC
+* Number of recursive dependencies: 188
-Run `cloud_details(, "rabhit")` for more info
+Run `cloud_details(, "phyr")` for more info
@@ -1717,23 +1560,27 @@ Run `cloud_details(, "rabhit")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/rabhit/new/rabhit.Rcheck’
+* using log directory ‘/tmp/workdir/phyr/new/phyr.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘rabhit/DESCRIPTION’ ... OK
+* checking for file ‘phyr/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘rabhit’ version ‘0.1.5’
+* this is package ‘phyr’ version ‘1.1.0’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'alakazam', 'tigger'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+...
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘benchmarks.Rmd’ using ‘UTF-8’... OK
+ ‘pglmm.Rmd’ using ‘UTF-8’... OK
+ ‘plot-re.Rmd’ using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR
+Status: 2 NOTEs
@@ -1743,40 +1590,44 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/rabhit/old/rabhit.Rcheck’
+* using log directory ‘/tmp/workdir/phyr/old/phyr.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘rabhit/DESCRIPTION’ ... OK
+* checking for file ‘phyr/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘rabhit’ version ‘0.1.5’
+* this is package ‘phyr’ version ‘1.1.0’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'alakazam', 'tigger'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+...
+ Running ‘testthat.R’
+* checking for unstated dependencies in vignettes ... OK
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘benchmarks.Rmd’ using ‘UTF-8’... OK
+ ‘pglmm.Rmd’ using ‘UTF-8’... OK
+ ‘plot-re.Rmd’ using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR
+Status: 2 NOTEs
```
-# Radviz
+# Platypus
-* Version: 0.9.2
-* GitHub: https://github.com/yannabraham/Radviz
-* Source code: https://github.com/cran/Radviz
-* Date/Publication: 2020-06-24 19:20:03 UTC
-* Number of recursive dependencies: 58
+* Version: 3.2.3
+* GitHub: NA
+* Source code: https://github.com/cran/Platypus
+* Date/Publication: 2021-10-19 07:00:02 UTC
+* Number of recursive dependencies: 243
-Run `cloud_details(, "Radviz")` for more info
+Run `cloud_details(, "Platypus")` for more info
@@ -1785,20 +1636,22 @@ Run `cloud_details(, "Radviz")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/Radviz/new/Radviz.Rcheck’
+* using log directory ‘/tmp/workdir/Platypus/new/Platypus.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘Radviz/DESCRIPTION’ ... OK
+* checking for file ‘Platypus/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘Radviz’ version ‘0.9.2’
+* this is package ‘Platypus’ version ‘3.2.3’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘ggplot2’
+...
+Packages required but not available: 'BiocGenerics', 'Biostrings'
-Packages suggested but not available for checking: 'cytofan', 'scales'
+Packages suggested but not available for checking:
+ 'AnnotationDbi', 'fgsea', 'IRanges', 'limma', 'org.Mm.eg.db',
+ 'phytools', 'SummarizedExperiment'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1813,20 +1666,22 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/Radviz/old/Radviz.Rcheck’
+* using log directory ‘/tmp/workdir/Platypus/old/Platypus.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘Radviz/DESCRIPTION’ ... OK
+* checking for file ‘Platypus/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘Radviz’ version ‘0.9.2’
+* this is package ‘Platypus’ version ‘3.2.3’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘ggplot2’
+...
+Packages required but not available: 'BiocGenerics', 'Biostrings'
-Packages suggested but not available for checking: 'cytofan', 'scales'
+Packages suggested but not available for checking:
+ 'AnnotationDbi', 'fgsea', 'IRanges', 'limma', 'org.Mm.eg.db',
+ 'phytools', 'SummarizedExperiment'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -1838,17 +1693,17 @@ Status: 1 ERROR
```
-# RavenR
+# pmc
-* Version: 2.1.0
-* GitHub: https://github.com/rchlumsk/RavenR
-* Source code: https://github.com/cran/RavenR
-* Date/Publication: 2021-06-10 08:20:07 UTC
-* Number of recursive dependencies: 124
+* Version: 1.0.4
+* GitHub: https://github.com/cboettig/pmc
+* Source code: https://github.com/cran/pmc
+* Date/Publication: 2021-01-07 18:10:12 UTC
+* Number of recursive dependencies: 97
-Run `cloud_details(, "RavenR")` for more info
+Run `cloud_details(, "pmc")` for more info
@@ -1857,27 +1712,21 @@ Run `cloud_details(, "RavenR")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/RavenR/new/RavenR.Rcheck’
+* using log directory ‘/tmp/workdir/pmc/new/pmc.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RavenR/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘RavenR’ version ‘2.1.0’
-* package encoding: UTF-8
+* checking for file ‘pmc/DESCRIPTION’ ... OK
+* this is package ‘pmc’ version ‘1.0.4’
* checking package namespace information ... OK
-...
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘Introduction_to_RavenR.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
+* checking package dependencies ... ERROR
+Package required but not available: ‘geiger’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
* DONE
-Status: 2 NOTEs
+Status: 1 ERROR
@@ -1887,27 +1736,21 @@ Status: 2 NOTEs
### CRAN
```
-* using log directory ‘/tmp/workdir/RavenR/old/RavenR.Rcheck’
+* using log directory ‘/tmp/workdir/pmc/old/pmc.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RavenR/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘RavenR’ version ‘2.1.0’
-* package encoding: UTF-8
+* checking for file ‘pmc/DESCRIPTION’ ... OK
+* this is package ‘pmc’ version ‘1.0.4’
* checking package namespace information ... OK
-...
-* checking installed files from ‘inst/doc’ ... OK
-* checking files in ‘vignettes’ ... OK
-* checking examples ... OK
-* checking for unstated dependencies in vignettes ... OK
-* checking package vignettes in ‘inst/doc’ ... OK
-* checking running R code from vignettes ... NONE
- ‘Introduction_to_RavenR.Rmd’ using ‘UTF-8’... OK
-* checking re-building of vignette outputs ... SKIPPED
+* checking package dependencies ... ERROR
+Package required but not available: ‘geiger’
+
+See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
+manual.
* DONE
-Status: 2 NOTEs
+Status: 1 ERROR
@@ -1922,7 +1765,7 @@ Status: 2 NOTEs
* GitHub: NA
* Source code: https://github.com/cran/raw
* Date/Publication: 2021-02-05 15:40:03 UTC
-* Number of recursive dependencies: 162
+* Number of recursive dependencies: 184
Run `cloud_details(, "raw")` for more info
@@ -1990,17 +1833,16 @@ Status: 1 NOTE
```
-# Rilostat
+# NA
-* Version: 1.1.8
-* GitHub: https://github.com/ilostat/Rilostat
-* Source code: https://github.com/cran/Rilostat
-* Date/Publication: 2021-07-29 06:40:02 UTC
-* Number of recursive dependencies: 123
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "Rilostat")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -2009,27 +1851,7 @@ Run `cloud_details(, "Rilostat")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/Rilostat/new/Rilostat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘Rilostat/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘Rilostat’ version ‘1.1.8’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking Rd cross-references ... OK
-* checking for missing documentation entries ... OK
-* checking for code/documentation mismatches ... OK
-* checking Rd \usage sections ... OK
-* checking Rd contents ... OK
-* checking for unstated dependencies in examples ... OK
-* checking R/sysdata.rda ... OK
-* checking examples ... OK
-* DONE
-Status: 1 NOTE
+
@@ -2039,44 +1861,24 @@ Status: 1 NOTE
### CRAN
```
-* using log directory ‘/tmp/workdir/Rilostat/old/Rilostat.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘Rilostat/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘Rilostat’ version ‘1.1.8’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-...
-* checking Rd cross-references ... OK
-* checking for missing documentation entries ... OK
-* checking for code/documentation mismatches ... OK
-* checking Rd \usage sections ... OK
-* checking Rd contents ... OK
-* checking for unstated dependencies in examples ... OK
-* checking R/sysdata.rda ... OK
-* checking examples ... OK
-* DONE
-Status: 1 NOTE
+
```
-# RKorAPClient
+# RevGadgets
-* Version: 0.7.1
-* GitHub: https://github.com/KorAP/RKorAPClient
-* Source code: https://github.com/cran/RKorAPClient
-* Date/Publication: 2021-09-21 13:30:09 UTC
-* Number of recursive dependencies: 115
+* Version: 1.0.0
+* GitHub: https://github.com/cmt2/RevGadgets
+* Source code: https://github.com/cran/RevGadgets
+* Date/Publication: 2021-09-13 11:40:04 UTC
+* Number of recursive dependencies: 113
-Run `cloud_details(, "RKorAPClient")` for more info
+Run `cloud_details(, "RevGadgets")` for more info
@@ -2085,18 +1887,18 @@ Run `cloud_details(, "RKorAPClient")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/RKorAPClient/new/RKorAPClient.Rcheck’
+* using log directory ‘/tmp/workdir/RevGadgets/new/RevGadgets.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RKorAPClient/DESCRIPTION’ ... OK
+* checking for file ‘RevGadgets/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘RKorAPClient’ version ‘0.7.1’
+* this is package ‘RevGadgets’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'ggplot2', 'PTXQC'
+Packages required but not available: 'phytools', 'ggtree'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2111,18 +1913,18 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/RKorAPClient/old/RKorAPClient.Rcheck’
+* using log directory ‘/tmp/workdir/RevGadgets/old/RevGadgets.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RKorAPClient/DESCRIPTION’ ... OK
+* checking for file ‘RevGadgets/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘RKorAPClient’ version ‘0.7.1’
+* this is package ‘RevGadgets’ version ‘1.0.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'ggplot2', 'PTXQC'
+Packages required but not available: 'phytools', 'ggtree'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2212,17 +2014,17 @@ ERROR: compilation failed for package ‘rmdcev’
```
-# RtutoR
+# RNeXML
-* Version: 1.2
-* GitHub: NA
-* Source code: https://github.com/cran/RtutoR
-* Date/Publication: 2018-09-14 07:50:07 UTC
-* Number of recursive dependencies: 125
+* Version: 2.4.5
+* GitHub: https://github.com/ropensci/RNeXML
+* Source code: https://github.com/cran/RNeXML
+* Date/Publication: 2020-06-18 18:40:02 UTC
+* Number of recursive dependencies: 141
-Run `cloud_details(, "RtutoR")` for more info
+Run `cloud_details(, "RNeXML")` for more info
@@ -2231,23 +2033,27 @@ Run `cloud_details(, "RtutoR")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/RtutoR/new/RtutoR.Rcheck’
+* using log directory ‘/tmp/workdir/RNeXML/new/RNeXML.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RtutoR/DESCRIPTION’ ... OK
+* checking for file ‘RNeXML/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘RtutoR’ version ‘1.2’
+* this is package ‘RNeXML’ version ‘2.4.5’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘devtools’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+...
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘S4.Rmd’ using ‘UTF-8’... OK
+ ‘intro.Rmd’ using ‘UTF-8’... OK
+ ‘metadata.Rmd’ using ‘UTF-8’... OK
+ ‘simmap.Rmd’ using ‘UTF-8’... OK
+ ‘sparql.Rmd’ using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR
+Status: 1 ERROR, 1 NOTE
@@ -2257,40 +2063,44 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/RtutoR/old/RtutoR.Rcheck’
+* using log directory ‘/tmp/workdir/RNeXML/old/RNeXML.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘RtutoR/DESCRIPTION’ ... OK
+* checking for file ‘RNeXML/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘RtutoR’ version ‘1.2’
+* this is package ‘RNeXML’ version ‘2.4.5’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘devtools’
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+...
+* checking package vignettes in ‘inst/doc’ ... OK
+* checking running R code from vignettes ... NONE
+ ‘S4.Rmd’ using ‘UTF-8’... OK
+ ‘intro.Rmd’ using ‘UTF-8’... OK
+ ‘metadata.Rmd’ using ‘UTF-8’... OK
+ ‘simmap.Rmd’ using ‘UTF-8’... OK
+ ‘sparql.Rmd’ using ‘UTF-8’... OK
+* checking re-building of vignette outputs ... SKIPPED
* DONE
-Status: 1 ERROR
+Status: 1 ERROR, 1 NOTE
```
-# scoper
+# rnoaa
-* Version: 1.1.0
-* GitHub: NA
-* Source code: https://github.com/cran/scoper
-* Date/Publication: 2020-08-10 21:50:02 UTC
-* Number of recursive dependencies: 119
+* Version: 1.3.4
+* GitHub: https://github.com/ropensci/rnoaa
+* Source code: https://github.com/cran/rnoaa
+* Date/Publication: 2021-05-19 07:10:03 UTC
+* Number of recursive dependencies: 157
-Run `cloud_details(, "scoper")` for more info
+Run `cloud_details(, "rnoaa")` for more info
@@ -2299,23 +2109,27 @@ Run `cloud_details(, "scoper")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/scoper/new/scoper.Rcheck’
+* using log directory ‘/tmp/workdir/rnoaa/new/rnoaa.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘scoper/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘scoper’ version ‘1.1.0’
+* checking for file ‘rnoaa/DESCRIPTION’ ... OK
+* this is package ‘rnoaa’ version ‘1.3.4’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'alakazam', 'shazam'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+* checking package dependencies ... NOTE
+...
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
* DONE
-Status: 1 ERROR
+Status: 1 NOTE
@@ -2325,40 +2139,44 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/scoper/old/scoper.Rcheck’
+* using log directory ‘/tmp/workdir/rnoaa/old/rnoaa.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘scoper/DESCRIPTION’ ... OK
-* checking extension type ... Package
-* this is package ‘scoper’ version ‘1.1.0’
+* checking for file ‘rnoaa/DESCRIPTION’ ... OK
+* this is package ‘rnoaa’ version ‘1.3.4’
* package encoding: UTF-8
* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Packages required but not available: 'alakazam', 'shazam'
-
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
+* checking package dependencies ... NOTE
+...
+* checking for unstated dependencies in examples ... OK
+* checking contents of ‘data’ directory ... OK
+* checking data for non-ASCII characters ... OK
+* checking data for ASCII and uncompressed saves ... OK
+* checking examples ... OK
+* checking for unstated dependencies in ‘tests’ ... OK
+* checking tests ... OK
+ Running ‘testthat.R’
* DONE
-Status: 1 ERROR
+Status: 1 NOTE
```
-# SCORPIUS
+# scoper
-* Version: 1.0.8
-* GitHub: https://github.com/rcannood/SCORPIUS
-* Source code: https://github.com/cran/SCORPIUS
-* Date/Publication: 2021-06-09 12:40:02 UTC
-* Number of recursive dependencies: 116
+* Version: 1.2.0
+* GitHub: NA
+* Source code: https://github.com/cran/scoper
+* Date/Publication: 2021-11-02 21:30:02 UTC
+* Number of recursive dependencies: 119
-Run `cloud_details(, "SCORPIUS")` for more info
+Run `cloud_details(, "scoper")` for more info
@@ -2367,20 +2185,18 @@ Run `cloud_details(, "SCORPIUS")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/SCORPIUS/new/SCORPIUS.Rcheck’
+* using log directory ‘/tmp/workdir/scoper/new/scoper.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘SCORPIUS/DESCRIPTION’ ... OK
+* checking for file ‘scoper/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘SCORPIUS’ version ‘1.0.8’
+* this is package ‘scoper’ version ‘1.2.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'dynwrap', 'ggplot2'
-
-Packages suggested but not available for checking: 'covr', 'testthat'
+Packages required but not available: 'alakazam', 'shazam'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2395,20 +2211,18 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/SCORPIUS/old/SCORPIUS.Rcheck’
+* using log directory ‘/tmp/workdir/scoper/old/scoper.Rcheck’
* using R version 4.0.3 (2020-10-10)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘SCORPIUS/DESCRIPTION’ ... OK
+* checking for file ‘scoper/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘SCORPIUS’ version ‘1.0.8’
+* this is package ‘scoper’ version ‘1.2.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... ERROR
-Packages required but not available: 'dynwrap', 'ggplot2'
-
-Packages suggested but not available for checking: 'covr', 'testthat'
+Packages required but not available: 'alakazam', 'shazam'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2420,17 +2234,16 @@ Status: 1 ERROR
```
-# SimBIID
+# NA
-* Version: 0.2.1
-* GitHub: https://github.com/tjmckinley/SimBIID
-* Source code: https://github.com/cran/SimBIID
-* Date/Publication: 2021-02-04 05:20:02 UTC
-* Number of recursive dependencies: 64
+* Version: NA
+* GitHub: NA
+* Source code: https://github.com/cran/NA
+* Number of recursive dependencies: 0
-Run `cloud_details(, "SimBIID")` for more info
+Run `cloud_details(, "NA")` for more info
@@ -2439,24 +2252,7 @@ Run `cloud_details(, "SimBIID")` for more info
### Devel
```
-* using log directory ‘/tmp/workdir/SimBIID/new/SimBIID.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘SimBIID/DESCRIPTION’ ... OK
-* this is package ‘SimBIID’ version ‘0.2.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘ggplot2’
-
-Packages suggested but not available for checking: 'GGally', 'testthat'
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -2466,24 +2262,7 @@ Status: 1 ERROR
### CRAN
```
-* using log directory ‘/tmp/workdir/SimBIID/old/SimBIID.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘SimBIID/DESCRIPTION’ ... OK
-* this is package ‘SimBIID’ version ‘0.2.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... ERROR
-Package required but not available: ‘ggplot2’
-
-Packages suggested but not available for checking: 'GGally', 'testthat'
-See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
-manual.
-* DONE
-Status: 1 ERROR
@@ -2562,11 +2341,11 @@ Status: 1 ERROR
-* Version: 2.2.6
+* Version: 2.2.7
* GitHub: https://github.com/xjsun1221/tinyarray
* Source code: https://github.com/cran/tinyarray
-* Date/Publication: 2021-09-14 06:40:02 UTC
-* Number of recursive dependencies: 206
+* Date/Publication: 2021-11-08 10:00:02 UTC
+* Number of recursive dependencies: 241
Run `cloud_details(, "tinyarray")` for more info
@@ -2584,7 +2363,7 @@ Run `cloud_details(, "tinyarray")` for more info
* using options ‘--no-manual --no-build-vignettes’
* checking for file ‘tinyarray/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘tinyarray’ version ‘2.2.6’
+* this is package ‘tinyarray’ version ‘2.2.7’
* package encoding: UTF-8
* checking package namespace information ... OK
...
@@ -2592,7 +2371,7 @@ Packages required but not available:
'clusterProfiler', 'limma', 'org.Hs.eg.db'
Packages suggested but not available for checking:
- 'AnnoProbe', 'GEOquery', 'Biobase'
+ 'AnnoProbe', 'GEOquery', 'Biobase', 'ComplexHeatmap'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2614,7 +2393,7 @@ Status: 1 ERROR
* using options ‘--no-manual --no-build-vignettes’
* checking for file ‘tinyarray/DESCRIPTION’ ... OK
* checking extension type ... Package
-* this is package ‘tinyarray’ version ‘2.2.6’
+* this is package ‘tinyarray’ version ‘2.2.7’
* package encoding: UTF-8
* checking package namespace information ... OK
...
@@ -2622,7 +2401,7 @@ Packages required but not available:
'clusterProfiler', 'limma', 'org.Hs.eg.db'
Packages suggested but not available for checking:
- 'AnnoProbe', 'GEOquery', 'Biobase'
+ 'AnnoProbe', 'GEOquery', 'Biobase', 'ComplexHeatmap'
See section ‘The DESCRIPTION file’ in the ‘Writing R Extensions’
manual.
@@ -2638,10 +2417,10 @@ Status: 1 ERROR
-* Version: 0.2.1
+* Version: 0.2.2
* GitHub: NA
* Source code: https://github.com/cran/vivid
-* Date/Publication: 2021-08-21 01:30:02 UTC
+* Date/Publication: 2021-10-12 13:50:02 UTC
* Number of recursive dependencies: 202
Run `cloud_details(, "vivid")` for more info
@@ -2659,7 +2438,7 @@ Run `cloud_details(, "vivid")` for more info
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
* checking for file ‘vivid/DESCRIPTION’ ... OK
-* this is package ‘vivid’ version ‘0.2.1’
+* this is package ‘vivid’ version ‘0.2.2’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... NOTE
@@ -2689,7 +2468,7 @@ Status: 1 ERROR, 2 NOTEs
* using session charset: UTF-8
* using options ‘--no-manual --no-build-vignettes’
* checking for file ‘vivid/DESCRIPTION’ ... OK
-* this is package ‘vivid’ version ‘0.2.1’
+* this is package ‘vivid’ version ‘0.2.2’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... NOTE
@@ -2718,7 +2497,7 @@ Status: 1 ERROR, 2 NOTEs
* GitHub: https://github.com/krlmlr/wrswoR
* Source code: https://github.com/cran/wrswoR
* Date/Publication: 2020-07-26 18:20:02 UTC
-* Number of recursive dependencies: 134
+* Number of recursive dependencies: 159
Run `cloud_details(, "wrswoR")` for more info
@@ -2785,80 +2564,4 @@ Status: 1 NOTE
-```
-# XPolaris
-
-
-
-* Version: 1.0.1
-* GitHub: https://github.com/lhmrosso/XPolaris
-* Source code: https://github.com/cran/XPolaris
-* Date/Publication: 2021-06-17 07:50:09 UTC
-* Number of recursive dependencies: 89
-
-Run `cloud_details(, "XPolaris")` for more info
-
-
-
-## Error before installation
-
-### Devel
-
-```
-* using log directory ‘/tmp/workdir/XPolaris/new/XPolaris.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘XPolaris/DESCRIPTION’ ... OK
-* this is package ‘XPolaris’ version ‘1.0.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... ERROR
- Running ‘testthat.R’
-Running the tests in ‘tests/testthat.R’ failed.
-Complete output:
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* DONE
-Status: 1 ERROR, 1 NOTE
-
-
-
-
-
-```
-### CRAN
-
-```
-* using log directory ‘/tmp/workdir/XPolaris/old/XPolaris.Rcheck’
-* using R version 4.0.3 (2020-10-10)
-* using platform: x86_64-pc-linux-gnu (64-bit)
-* using session charset: UTF-8
-* using options ‘--no-manual --no-build-vignettes’
-* checking for file ‘XPolaris/DESCRIPTION’ ... OK
-* this is package ‘XPolaris’ version ‘1.0.1’
-* package encoding: UTF-8
-* checking package namespace information ... OK
-* checking package dependencies ... NOTE
-...
-* checking for unstated dependencies in ‘tests’ ... OK
-* checking tests ... ERROR
- Running ‘testthat.R’
-Running the tests in ‘tests/testthat.R’ failed.
-Complete output:
- > library(testthat)
- Error in library(testthat) : there is no package called 'testthat'
- Execution halted
-* DONE
-Status: 1 ERROR, 1 NOTE
-
-
-
-
-
```
diff --git a/revdep/problems.md b/revdep/problems.md
index 9a2073633..21fdff595 100644
--- a/revdep/problems.md
+++ b/revdep/problems.md
@@ -1 +1,536 @@
-*Wow, no problems at all. :)*
\ No newline at end of file
+# causact
+
+
+
+* Version: 0.4.0
+* GitHub: https://github.com/flyaflya/causact
+* Source code: https://github.com/cran/causact
+* Date/Publication: 2021-01-25 17:00:11 UTC
+* Number of recursive dependencies: 85
+
+Run `cloud_details(, "causact")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘causact-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: dag_diagrammer
+ > ### Title: The graph object should be of class 'causact_graph' and created
+ > ### using 'dag_create()'.
+ > ### Aliases: dag_diagrammer
+ >
+ > ### ** Examples
+ >
+ ...
+ 14. ├─tidyr::replace_na(., "")
+ 15. └─tidyr:::replace_na.default(., "")
+ 16. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 17. └─(function () ...
+ 18. └─vctrs::vec_default_cast(...)
+ 19. └─vctrs::stop_incompatible_cast(...)
+ 20. └─vctrs::stop_incompatible_type(...)
+ 21. └─vctrs:::stop_incompatible(...)
+ 22. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+# crosstable
+
+
+
+* Version: 0.2.2
+* GitHub: https://github.com/DanChaltiel/crosstable
+* Source code: https://github.com/cran/crosstable
+* Date/Publication: 2021-10-19 11:50:02 UTC
+* Number of recursive dependencies: 113
+
+Run `cloud_details(, "crosstable")` for more info
+
+
+
+## Newly broken
+
+* checking tests ... ERROR
+ ```
+ Running ‘testthat.R’
+ Running the tests in ‘tests/testthat.R’ failed.
+ Last 13 lines of output:
+ 7. └─vctrs::vec_equal_na(data)
+ ── Error (test-4-officer.R:305:5): gt is working ───────────────────────────────
+ Error in `vec_equal_na(data)`: Unimplemented type in `vctrs_equal_na()`.
+ Backtrace:
+ █
+ 1. ├─crosstable::as_gt(x1)
+ 2. ├─crosstable:::as_gt.crosstable(x1)
+ 3. │ └─attr(x, "by_levels") %>% unlist() %>% unname() %>% replace_na("NA")
+ 4. ├─tidyr::replace_na(., "NA")
+ 5. └─tidyr:::replace_na.default(., "NA")
+ 6. └─vctrs::vec_equal_na(data)
+
+ [ FAIL 2 | WARN 0 | SKIP 11 | PASS 374 ]
+ Error: Test failures
+ Execution halted
+ ```
+
+## In both
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘crosstable-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: as_gt.crosstable
+ > ### Title: Converts a 'crosstable' object into a formatted 'gt' table.
+ > ### Aliases: as_gt.crosstable as_gt as_gt.default
+ >
+ > ### ** Examples
+ >
+ > xx = mtcars2 %>% dplyr::select(1:9)
+ > crosstable(xx) %>% as_gt
+ Error in vec_equal_na(data) : Unimplemented type in `vctrs_equal_na()`.
+ Calls: %>% ... %>% -> replace_na -> replace_na.default -> vec_equal_na
+ Execution halted
+ ```
+
+# DSSAT
+
+
+
+* Version: 0.0.4
+* GitHub: https://github.com/palderman/DSSAT
+* Source code: https://github.com/cran/DSSAT
+* Date/Publication: 2021-09-02 16:20:06 UTC
+* Number of recursive dependencies: 46
+
+Run `cloud_details(, "DSSAT")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘DSSAT-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: add_v_fmt
+ > ### Title: Adds variable format information to a tibble
+ > ### Aliases: add_v_fmt
+ >
+ > ### ** Examples
+ >
+ >
+ ...
+ 19. ├─tidyr::replace_na(.data$width, "")
+ 20. └─tidyr:::replace_na.default(.data$width, "")
+ 21. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 22. └─(function () ...
+ 23. └─vctrs::vec_default_cast(...)
+ 24. └─vctrs::stop_incompatible_cast(...)
+ 25. └─vctrs::stop_incompatible_type(...)
+ 26. └─vctrs:::stop_incompatible(...)
+ 27. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+# heuristicsmineR
+
+
+
+* Version: 0.2.5
+* GitHub: https://github.com/bupaverse/heuristicsmineR
+* Source code: https://github.com/cran/heuristicsmineR
+* Date/Publication: 2021-10-11 18:50:05 UTC
+* Number of recursive dependencies: 103
+
+Run `cloud_details(, "heuristicsmineR")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘heuristicsmineR-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: causal_custom
+ > ### Title: Custom map profile
+ > ### Aliases: causal_custom
+ >
+ > ### ** Examples
+ >
+ > causal_net(L_heur_1,
+ ...
+ 18. ├─tidyr::replace_na(., "")
+ 19. └─tidyr:::replace_na.default(., "")
+ 20. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 21. └─(function () ...
+ 22. └─vctrs::vec_default_cast(...)
+ 23. └─vctrs::stop_incompatible_cast(...)
+ 24. └─vctrs::stop_incompatible_type(...)
+ 25. └─vctrs:::stop_incompatible(...)
+ 26. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+## In both
+
+* checking installed package size ... NOTE
+ ```
+ installed size is 5.5Mb
+ sub-directories of 1Mb or more:
+ libs 4.4Mb
+ ```
+
+# processanimateR
+
+
+
+* Version: 1.0.4
+* GitHub: https://github.com/bupaverse/processanimateR
+* Source code: https://github.com/cran/processanimateR
+* Date/Publication: 2021-10-11 18:50:02 UTC
+* Number of recursive dependencies: 116
+
+Run `cloud_details(, "processanimateR")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘processanimateR-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: animate_process
+ > ### Title: Animate cases on a process map
+ > ### Aliases: animate_process
+ >
+ > ### ** Examples
+ >
+ > data(example_log)
+ ...
+ 15. ├─tidyr::replace_na(., "")
+ 16. └─tidyr:::replace_na.default(., "")
+ 17. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 18. └─(function () ...
+ 19. └─vctrs::vec_default_cast(...)
+ 20. └─vctrs::stop_incompatible_cast(...)
+ 21. └─vctrs::stop_incompatible_type(...)
+ 22. └─vctrs:::stop_incompatible(...)
+ 23. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+## In both
+
+* checking installed package size ... NOTE
+ ```
+ installed size is 13.9Mb
+ sub-directories of 1Mb or more:
+ doc 11.1Mb
+ htmlwidgets 2.6Mb
+ ```
+
+# RavenR
+
+
+
+* Version: 2.1.4
+* GitHub: https://github.com/rchlumsk/RavenR
+* Source code: https://github.com/cran/RavenR
+* Date/Publication: 2021-09-23 15:50:02 UTC
+* Number of recursive dependencies: 123
+
+Run `cloud_details(, "RavenR")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘RavenR-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: rvn_rvi_process_diagrammer
+ > ### Title: Plot Raven hydrologic process network using DiagrammeR
+ > ### Aliases: rvn_rvi_process_diagrammer
+ >
+ > ### ** Examples
+ >
+ > d1 <- rvn_rvi_read(system.file("extdata","Nith.rvi", package="RavenR")) %>%
+ ...
+ 14. ├─tidyr::replace_na(., "")
+ 15. └─tidyr:::replace_na.default(., "")
+ 16. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 17. └─(function () ...
+ 18. └─vctrs::vec_default_cast(...)
+ 19. └─vctrs::stop_incompatible_cast(...)
+ 20. └─vctrs::stop_incompatible_type(...)
+ 21. └─vctrs:::stop_incompatible(...)
+ 22. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+## In both
+
+* checking installed package size ... NOTE
+ ```
+ installed size is 5.2Mb
+ sub-directories of 1Mb or more:
+ doc 1.1Mb
+ extdata 1.3Mb
+ libs 2.0Mb
+ ```
+
+# REddyProc
+
+
+
+* Version: 1.3.0
+* GitHub: https://github.com/bgctw/REddyProc
+* Source code: https://github.com/cran/REddyProc
+* Date/Publication: 2021-10-14 09:10:02 UTC
+* Number of recursive dependencies: 85
+
+Run `cloud_details(, "REddyProc")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘REddyProc-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: fLoadFluxnet15
+ > ### Title: Read a file in the format of Fluxnet 2015 release
+ > ### Aliases: fLoadFluxnet15
+ >
+ > ### ** Examples
+ >
+ > ds_fn15 <- Example_DETha98 %>%
+ ...
+
+ Traceback:
+ 1: fCheckValString(ID)
+ 2: .Object$initialize(...)
+ 3: initialize(value, ...)
+ 4: initialize(value, ...)
+ 5: methods::new(def, ...)
+ 6: sEddyProc$new("DE-Tha", ds_eproc, c("NEE", "Rg", "Tair", "VPD", "Ustar", "season"), ColNamesNonNumeric = "season")
+ An irrecoverable exception occurred. R is aborting now ...
+ Segmentation fault (core dumped)
+ ```
+
+# tidygate
+
+
+
+* Version: 0.4.7
+* GitHub: https://github.com/stemangiola/tidygate
+* Source code: https://github.com/cran/tidygate
+* Date/Publication: 2021-05-03 09:10:02 UTC
+* Number of recursive dependencies: 62
+
+Run `cloud_details(, "tidygate")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘tidygate-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: gate
+ > ### Title: DEPRECATED - use gate_chr, gate_int instead inside a
+ > ### dplyr::mutate() statement
+ > ### Aliases: gate gate.spec_tbl_df gate.tbl_df
+ > ### Keywords: internal
+ >
+ > ### ** Examples
+ ...
+ 17. ├─tidyr::replace_na(gate, 0)
+ 18. └─tidyr:::replace_na.default(gate, 0)
+ 19. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 20. └─(function () ...
+ 21. └─vctrs::vec_default_cast(...)
+ 22. └─vctrs::stop_incompatible_cast(...)
+ 23. └─vctrs::stop_incompatible_type(...)
+ 24. └─vctrs:::stop_incompatible(...)
+ 25. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+# tidytidbits
+
+
+
+* Version: 0.2.3
+* GitHub: NA
+* Source code: https://github.com/cran/tidytidbits
+* Date/Publication: 2021-03-08 16:22:06 UTC
+* Number of recursive dependencies: 29
+
+Run `cloud_details(, "tidytidbits")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘tidytidbits-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: count_at
+ > ### Title: Count by multiple variables
+ > ### Aliases: count_at
+ >
+ > ### ** Examples
+ >
+ > library(magrittr)
+ ...
+ 10. ├─tidyr::replace_na(., na_replacement_list)
+ 11. └─tidyr:::replace_na.data.frame(., na_replacement_list)
+ 12. └─vctrs::vec_assign(...)
+ 13. └─(function () ...
+ 14. └─vctrs::vec_default_cast(...)
+ 15. └─vctrs::stop_incompatible_cast(...)
+ 16. └─vctrs::stop_incompatible_type(...)
+ 17. └─vctrs:::stop_incompatible(...)
+ 18. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+# Tplyr
+
+
+
+* Version: 0.4.2
+* GitHub: https://github.com/atorus-research/Tplyr
+* Source code: https://github.com/cran/Tplyr
+* Date/Publication: 2021-10-15 13:20:02 UTC
+* Number of recursive dependencies: 116
+
+Run `cloud_details(, "Tplyr")` for more info
+
+
+
+## Newly broken
+
+* checking tests ... ERROR
+ ```
+ Running ‘testthat.R’
+ Running the tests in ‘tests/testthat.R’ failed.
+ Last 13 lines of output:
+ Results have changed from known value recorded in 'count_t7'.
+
+ old[2:7] vs new[2:7]
+ " var1_3 = c(\" 2 (13.3)\", \"12 (80.0)\", \" 1\", \" 15 [100.0]\""
+ " ), var1_4 = c(\" 4 (33.3)\", \" 0 ( 0.0)\", \" 8\", \" 12 [100.0]\""
+ " ), var1_5 = c(\" 1 (20.0)\", \" 2 (40.0)\", \" 2\", \" 5 [100.0]\""
+ - " ), ord_layer_index = c(1L, 1L, 1L, 1L), ord_layer_1 = c(4, "
+ + " ), ord_layer_index = c(1L, 1L, 1L, 1L), ord_layer_1 = c(4L, "
+ - " 0, 8, -6795)), row.names = c(NA, -4L), class = c(\"tbl_df\", "
+ + " 0L, 8L, -6795L)), row.names = c(NA, -4L), class = c(\"tbl_df\", "
+ "\"tbl\", \"data.frame\"))"
+
+ [ FAIL 12 | WARN 0 | SKIP 0 | PASS 674 ]
+ Error: Test failures
+ Execution halted
+ ```
+
+# wpa
+
+
+
+* Version: 1.6.2
+* GitHub: https://github.com/microsoft/wpa
+* Source code: https://github.com/cran/wpa
+* Date/Publication: 2021-10-15 14:50:02 UTC
+* Number of recursive dependencies: 119
+
+Run `cloud_details(, "wpa")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘wpa-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: workpatterns_area
+ > ### Title: Create an area plot of emails and IMs by hour of the day
+ > ### Aliases: workpatterns_area
+ >
+ > ### ** Examples
+ >
+ >
+ ...
+ 12. ├─tidyr::replace_na(., 0)
+ 13. └─tidyr:::replace_na.default(., 0)
+ 14. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 15. └─(function () ...
+ 16. └─vctrs::vec_default_cast(...)
+ 17. └─vctrs::stop_incompatible_cast(...)
+ 18. └─vctrs::stop_incompatible_type(...)
+ 19. └─vctrs:::stop_incompatible(...)
+ 20. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+
+# xml2relational
+
+
+
+* Version: 0.1.0
+* GitHub: https://github.com/jsugarelli/xml2relational
+* Source code: https://github.com/cran/xml2relational
+* Date/Publication: 2020-05-11 12:40:03 UTC
+* Number of recursive dependencies: 25
+
+Run `cloud_details(, "xml2relational")` for more info
+
+
+
+## Newly broken
+
+* checking examples ... ERROR
+ ```
+ Running examples in ‘xml2relational-Ex.R’ failed
+ The error most likely occurred in:
+
+ > ### Name: getCreateSQL
+ > ### Title: Exporting the relational data model and data to a database
+ > ### Aliases: getCreateSQL
+ >
+ > ### ** Examples
+ >
+ > # Find path to custmers.xml example file in package directory
+ ...
+ 8. ├─tidyr::replace_na(elem.df[record, i], 0)
+ 9. └─tidyr:::replace_na.default(elem.df[record, i], 0)
+ 10. └─vctrs::vec_assign(data, missing, replace, x_arg = "data", value_arg = "replace")
+ 11. └─(function () ...
+ 12. └─vctrs::vec_default_cast(...)
+ 13. └─vctrs::stop_incompatible_cast(...)
+ 14. └─vctrs::stop_incompatible_type(...)
+ 15. └─vctrs:::stop_incompatible(...)
+ 16. └─vctrs:::stop_vctrs(...)
+ Execution halted
+ ```
+