diff --git a/drivers/net/ethernet/mellanox/mlxsw/i2c.c b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
index 803ce9623205b7..95f408d0e103c7 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/i2c.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/i2c.c
@@ -43,11 +43,10 @@
 #define MLXSW_I2C_PREP_SIZE		(MLXSW_I2C_ADDR_WIDTH + 28)
 #define MLXSW_I2C_MBOX_SIZE		20
 #define MLXSW_I2C_MBOX_OUT_PARAM_OFF	12
-#define MLXSW_I2C_MAX_BUFF_SIZE		32
 #define MLXSW_I2C_MBOX_OFFSET_BITS	20
 #define MLXSW_I2C_MBOX_SIZE_BITS	12
 #define MLXSW_I2C_ADDR_BUF_SIZE		4
-#define MLXSW_I2C_BLK_MAX		32
+#define MLXSW_I2C_BLK_DEF		32
 #define MLXSW_I2C_RETRY			5
 #define MLXSW_I2C_TIMEOUT_MSECS		5000
 #define MLXSW_I2C_MAX_DATA_SIZE		256
@@ -62,6 +61,7 @@
  * @dev: I2C device;
  * @core: switch core pointer;
  * @bus_info: bus info block;
+ * @block_size: maximum block size allowed to pass to under layer;
  */
 struct mlxsw_i2c {
 	struct {
@@ -74,6 +74,7 @@ struct mlxsw_i2c {
 	struct device *dev;
 	struct mlxsw_core *core;
 	struct mlxsw_bus_info bus_info;
+	u16 block_size;
 };
 
 #define MLXSW_I2C_READ_MSG(_client, _addr_buf, _buf, _len) {	\
@@ -315,20 +316,26 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mlxsw_i2c *mlxsw_i2c = i2c_get_clientdata(client);
 	unsigned long timeout = msecs_to_jiffies(MLXSW_I2C_TIMEOUT_MSECS);
-	u8 tran_buf[MLXSW_I2C_MAX_BUFF_SIZE + MLXSW_I2C_ADDR_BUF_SIZE];
 	int off = mlxsw_i2c->cmd.mb_off_in, chunk_size, i, j;
 	unsigned long end;
+	u8 *tran_buf;
 	struct i2c_msg write_tran =
-		MLXSW_I2C_WRITE_MSG(client, tran_buf, MLXSW_I2C_PUSH_CMD_SIZE);
+		MLXSW_I2C_WRITE_MSG(client, NULL, MLXSW_I2C_PUSH_CMD_SIZE);
 	int err;
 
+	tran_buf = kmalloc(mlxsw_i2c->block_size + MLXSW_I2C_ADDR_BUF_SIZE,
+			   GFP_KERNEL);
+	if (!tran_buf)
+		return -ENOMEM;
+
+	write_tran.buf = tran_buf;
 	for (i = 0; i < num; i++) {
-		chunk_size = (in_mbox_size > MLXSW_I2C_BLK_MAX) ?
-			     MLXSW_I2C_BLK_MAX : in_mbox_size;
+		chunk_size = (in_mbox_size > mlxsw_i2c->block_size) ?
+			     mlxsw_i2c->block_size : in_mbox_size;
 		write_tran.len = MLXSW_I2C_ADDR_WIDTH + chunk_size;
 		mlxsw_i2c_set_slave_addr(tran_buf, off);
 		memcpy(&tran_buf[MLXSW_I2C_ADDR_BUF_SIZE], in_mbox +
-		       MLXSW_I2C_BLK_MAX * i, chunk_size);
+		       mlxsw_i2c->block_size * i, chunk_size);
 
 		j = 0;
 		end = jiffies + timeout;
@@ -342,9 +349,10 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 			 (j++ < MLXSW_I2C_RETRY));
 
 		if (err != 1) {
-			if (!err)
+			if (!err) {
 				err = -EIO;
-			return err;
+				goto mlxsw_i2c_write_exit;
+			}
 		}
 
 		off += chunk_size;
@@ -355,24 +363,27 @@ mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
 	err = mlxsw_i2c_write_cmd(client, mlxsw_i2c, 0);
 	if (err) {
 		dev_err(&client->dev, "Could not start transaction");
-		return -EIO;
+		err = -EIO;
+		goto mlxsw_i2c_write_exit;
 	}
 
 	/* Wait until go bit is cleared. */
 	err = mlxsw_i2c_wait_go_bit(client, mlxsw_i2c, p_status);
 	if (err) {
 		dev_err(&client->dev, "HW semaphore is not released");
-		return err;
+		goto mlxsw_i2c_write_exit;
 	}
 
 	/* Validate transaction completion status. */
 	if (*p_status) {
 		dev_err(&client->dev, "Bad transaction completion status %x\n",
 			*p_status);
-		return -EIO;
+		err = -EIO;
 	}
 
-	return 0;
+mlxsw_i2c_write_exit:
+	kfree(tran_buf);
+	return err;
 }
 
 /* Routine executes I2C command. */
@@ -395,8 +406,8 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 
 	if (in_mbox) {
 		reg_size = mlxsw_i2c_get_reg_size(in_mbox);
-		num = reg_size / MLXSW_I2C_BLK_MAX;
-		if (reg_size % MLXSW_I2C_BLK_MAX)
+		num = reg_size / mlxsw_i2c->block_size;
+		if (reg_size % mlxsw_i2c->block_size)
 			num++;
 
 		if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
@@ -416,7 +427,7 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 	} else {
 		/* No input mailbox is case of initialization query command. */
 		reg_size = MLXSW_I2C_MAX_DATA_SIZE;
-		num = reg_size / MLXSW_I2C_BLK_MAX;
+		num = reg_size / mlxsw_i2c->block_size;
 
 		if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
 			dev_err(&client->dev, "Could not acquire lock");
@@ -432,8 +443,8 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 	/* Send read transaction to get output mailbox content. */
 	read_tran[1].buf = out_mbox;
 	for (i = 0; i < num; i++) {
-		chunk_size = (reg_size > MLXSW_I2C_BLK_MAX) ?
-			     MLXSW_I2C_BLK_MAX : reg_size;
+		chunk_size = (reg_size > mlxsw_i2c->block_size) ?
+			     mlxsw_i2c->block_size : reg_size;
 		read_tran[1].len = chunk_size;
 		mlxsw_i2c_set_slave_addr(tran_buf, off);
 
@@ -546,6 +557,7 @@ static const struct mlxsw_bus mlxsw_i2c_bus = {
 static int mlxsw_i2c_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
 	struct mlxsw_i2c *mlxsw_i2c;
 	u8 status;
 	int err;
@@ -554,6 +566,22 @@ static int mlxsw_i2c_probe(struct i2c_client *client,
 	if (!mlxsw_i2c)
 		return -ENOMEM;
 
+	if (quirks) {
+		if ((quirks->max_read_len &&
+		     quirks->max_read_len < MLXSW_I2C_BLK_DEF) ||
+		    (quirks->max_write_len &&
+		     quirks->max_write_len < MLXSW_I2C_BLK_DEF)) {
+			dev_err(&client->dev, "Insufficient transaction buffer length\n");
+			return -EOPNOTSUPP;
+		}
+
+		mlxsw_i2c->block_size = max_t(u16, MLXSW_I2C_BLK_DEF,
+					      min_t(u16, quirks->max_read_len,
+						    quirks->max_write_len));
+	} else {
+		mlxsw_i2c->block_size = MLXSW_I2C_BLK_DEF;
+	}
+
 	i2c_set_clientdata(client, mlxsw_i2c);
 	mutex_init(&mlxsw_i2c->cmd.lock);