diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index cd0243302bc1c2..91ec8f2055be35 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -67,6 +67,10 @@ SunXi family + Datasheet http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + - Allwinner V3s (sun8i) + + Datasheet + https://www.goprawn.com/forum/allwinner-cams/783-allwinner-v3s-soc-datasheet + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 + Datasheet diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 287150db6db4f9..e423342581855d 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -10,6 +10,7 @@ Required properties: * allwinner,sun8i-a23-usb-phy * allwinner,sun8i-a33-usb-phy * allwinner,sun8i-h3-usb-phy + * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy - reg : a list of offset + length pairs - reg-names : diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index 862cd7c798056b..d9b42da016f3a2 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -2,8 +2,8 @@ Allwinner sun4i A10 musb DRC/OTG controller ------------------------------------------- Required properties: - - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb" - or "allwinner,sun8i-a33-musb" + - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb", + "allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb" - reg : mmio address range of the musb controller - clocks : clock specifier for the musb controller ahb gate clock - reset : reset specifier for the ahb reset (A31 and newer only) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6d2..3e099e9b1ad722 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -853,7 +853,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ - sun8i-r16-parrot.dtb + sun8i-r16-parrot.dtb \ + sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts new file mode 100644 index 00000000000000..3d9168cbaeca4b --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2016 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-v3s.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Lichee Pi Zero"; + compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-names = "default"; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi new file mode 100644 index 00000000000000..ebefc0fefef2ac --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -0,0 +1,284 @@ +/* + * Copyright (C) 2016 Icenowy Zheng + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPU>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = ; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-v3s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rtc: rtc@01c20400 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01c20400 0x54>; + interrupts = , + ; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-v3s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = , + ; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + bias-pull-up; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + }; +}; diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 2e2bde271205e0..f246bfc6cfe407 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -64,6 +64,7 @@ static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a33", "allwinner,sun8i-a83t", "allwinner,sun8i-h3", + "allwinner,sun8i-v3s", NULL, }; diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index 8454c6e3dd65f2..1ca48255802f3a 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -109,4 +109,15 @@ config SUN8I_H3_CCU select SUNXI_CCU_PHASE default MACH_SUN8I +config SUN8I_V3S_CCU + bool "Support for the Allwinner V3s CCU" + select SUNXI_CCU_DIV + select SUNXI_CCU_NK + select SUNXI_CCU_NKM + select SUNXI_CCU_NKMP + select SUNXI_CCU_NM + select SUNXI_CCU_MP + select SUNXI_CCU_PHASE + default MACH_SUN8I + endif diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 24fbc6e5deb81e..d1cd81a0f11244 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o +obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c new file mode 100644 index 00000000000000..e569af9338c2f9 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c @@ -0,0 +1,590 @@ +/* + * Copyright (c) 2016 Icenowy Zheng + * + * Based on ccu-sun8i-h3.c, which is: + * Copyright (c) 2016 Maxime Ripard. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" +#include "ccu_phase.h" + +#include "ccu-sun8i-v3s.h" + +static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu", + "osc24M", 0x000, + 8, 5, /* N */ + 4, 2, /* K */ + 0, 2, /* M */ + 16, 2, /* P */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +/* + * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from + * the base (2x, 4x and 8x), and one variable divider (the one true + * pll audio). + * + * We don't have any need for the variable divider for now, so we just + * hardcode it to match with the clock names + */ +#define SUN8I_V3S_PLL_AUDIO_REG 0x008 + +static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base", + "osc24M", 0x008, + 8, 7, /* N */ + 0, 5, /* M */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video", + "osc24M", 0x0010, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve", + "osc24M", 0x0018, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr", + "osc24M", 0x020, + 8, 5, /* N */ + 4, 2, /* K */ + 0, 2, /* M */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0", + "osc24M", 0x028, + 8, 5, /* N */ + 4, 2, /* K */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp", + "osc24M", 0x002c, + 8, 7, /* N */ + 0, 4, /* M */ + BIT(24), /* frac enable */ + BIT(25), /* frac select */ + 270000000, /* frac rate 0 */ + 297000000, /* frac rate 1 */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 0); + +static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1", + "osc24M", 0x044, + 8, 5, /* N */ + 4, 2, /* K */ + BIT(31), /* gate */ + BIT(28), /* lock */ + 2, /* post-div */ + 0); + +static const char * const cpu_parents[] = { "osc32k", "osc24M", + "pll-cpu" , "pll-cpu" }; +static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents, + 0x050, 16, 2, CLK_IS_CRITICAL); + +static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0); + +static const char * const ahb1_parents[] = { "osc32k", "osc24M", + "axi" , "pll-periph0" }; +static struct ccu_div ahb1_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 12, + .width = 2, + + .variable_prediv = { + .index = 3, + .shift = 6, + .width = 2, + }, + }, + + .common = { + .reg = 0x054, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("ahb1", + ahb1_parents, + &ccu_div_ops, + 0), + }, +}; + +static struct clk_div_table apb1_div_table[] = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { /* Sentinel */ }, +}; +static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1", + 0x054, 8, 2, apb1_div_table, 0); + +static const char * const apb2_parents[] = { "osc32k", "osc24M", + "pll-periph0" , "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058, + 0, 5, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + 0); + +static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" }; +static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = { + { .index = 1, .div = 2 }, +}; +static struct ccu_mux ahb2_clk = { + .mux = { + .shift = 0, + .width = 1, + .fixed_predivs = ahb2_fixed_predivs, + .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs), + }, + + .common = { + .reg = 0x05c, + .features = CCU_FEATURE_FIXED_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("ahb2", + ahb2_parents, + &ccu_mux_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1", + 0x060, BIT(5), 0); +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1", + 0x060, BIT(6), 0); +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1", + 0x060, BIT(8), 0); +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1", + 0x060, BIT(9), 0); +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1", + 0x060, BIT(10), 0); +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1", + 0x060, BIT(14), 0); +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2", + 0x060, BIT(17), 0); +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1", + 0x060, BIT(19), 0); +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1", + 0x060, BIT(20), 0); +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1", + 0x060, BIT(24), 0); +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1", + 0x060, BIT(26), 0); +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1", + 0x060, BIT(29), 0); + +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1", + 0x064, BIT(0), 0); +static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1", + 0x064, BIT(4), 0); +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1", + 0x064, BIT(8), 0); +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1", + 0x064, BIT(12), 0); + +static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1", + 0x068, BIT(0), 0); +static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1", + 0x068, BIT(5), 0); + +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", + 0x06c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", + 0x06c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", + 0x06c, BIT(16), 0); +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", + 0x06c, BIT(17), 0); +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", + 0x06c, BIT(18), 0); + +static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1", + 0x070, BIT(0), 0); +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1", + 0x070, BIT(7), 0); + +static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0", + "pll-periph1" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0", + 0x088, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0", + 0x088, 8, 3, 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1", + 0x08c, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1", + 0x08c, 8, 3, 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2", + 0x090, 20, 3, 0); +static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2", + 0x090, 8, 3, 0); + +static const char * const ce_parents[] = { "osc24M", "pll-periph0", }; + +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0, + 0, 4, /* M */ + 16, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", + 0x0cc, BIT(8), 0); +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M", + 0x0cc, BIT(16), 0); + +static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" }; +static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents, + 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL); + +static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram", + 0x100, BIT(0), 0); +static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram", + 0x100, BIT(1), 0); +static SUNXI_CCU_GATE(dram_ehci_clk, "dram-ehci", "dram", + 0x100, BIT(17), 0); +static SUNXI_CCU_GATE(dram_ohci_clk, "dram-ohci", "dram", + 0x100, BIT(18), 0); + +static const char * const de_parents[] = { "pll-video", "pll-periph0" }; +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, + 0x104, 0, 4, 24, 2, BIT(31), 0); + +static const char * const tcon_parents[] = { "pll-video" }; +static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents, + 0x118, 0, 4, 24, 3, BIT(31), 0); + +static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", + 0x130, BIT(31), 0); + +static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", + "pll-periph0", "pll-periph1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents, + 0x130, 0, 5, 8, 3, BIT(15), 0); + +static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents, + 0x134, 16, 4, 24, 3, BIT(31), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents, + 0x134, 0, 5, 8, 3, BIT(15), 0); + +static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", + 0x13c, 16, 3, BIT(31), 0); + +static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio", + 0x140, BIT(31), CLK_SET_RATE_PARENT); +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", + 0x144, BIT(31), 0); + +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, + 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL); + +static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0", + "pll-isp" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents, + 0x16c, 0, 3, 24, 2, BIT(31), 0); + +static struct ccu_common *sun8i_v3s_ccu_clks[] = { + &pll_cpu_clk.common, + &pll_audio_base_clk.common, + &pll_video_clk.common, + &pll_ve_clk.common, + &pll_ddr_clk.common, + &pll_periph0_clk.common, + &pll_isp_clk.common, + &pll_periph1_clk.common, + &cpu_clk.common, + &axi_clk.common, + &ahb1_clk.common, + &apb1_clk.common, + &apb2_clk.common, + &ahb2_clk.common, + &bus_ce_clk.common, + &bus_dma_clk.common, + &bus_mmc0_clk.common, + &bus_mmc1_clk.common, + &bus_mmc2_clk.common, + &bus_dram_clk.common, + &bus_emac_clk.common, + &bus_hstimer_clk.common, + &bus_spi0_clk.common, + &bus_otg_clk.common, + &bus_ehci0_clk.common, + &bus_ohci0_clk.common, + &bus_ve_clk.common, + &bus_tcon0_clk.common, + &bus_csi_clk.common, + &bus_de_clk.common, + &bus_codec_clk.common, + &bus_pio_clk.common, + &bus_i2c0_clk.common, + &bus_i2c1_clk.common, + &bus_uart0_clk.common, + &bus_uart1_clk.common, + &bus_uart2_clk.common, + &bus_ephy_clk.common, + &bus_dbg_clk.common, + &mmc0_clk.common, + &mmc0_sample_clk.common, + &mmc0_output_clk.common, + &mmc1_clk.common, + &mmc1_sample_clk.common, + &mmc1_output_clk.common, + &mmc2_clk.common, + &mmc2_sample_clk.common, + &mmc2_output_clk.common, + &ce_clk.common, + &spi0_clk.common, + &usb_phy0_clk.common, + &usb_ohci0_clk.common, + &dram_clk.common, + &dram_ve_clk.common, + &dram_csi_clk.common, + &dram_ohci_clk.common, + &dram_ehci_clk.common, + &de_clk.common, + &tcon_clk.common, + &csi_misc_clk.common, + &csi0_mclk_clk.common, + &csi1_sclk_clk.common, + &csi1_mclk_clk.common, + &ve_clk.common, + &ac_dig_clk.common, + &avs_clk.common, + &mbus_clk.common, + &mipi_csi_clk.common, +}; + +/* We hardcode the divider to 4 for now */ +static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio", + "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x", + "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x", + "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x", + "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x", + "pll-periph0", 1, 2, 0); + +static struct clk_hw_onecell_data sun8i_v3s_hw_clks = { + .hws = { + [CLK_PLL_CPU] = &pll_cpu_clk.common.hw, + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw, + [CLK_PLL_AUDIO] = &pll_audio_clk.hw, + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw, + [CLK_PLL_VIDEO] = &pll_video_clk.common.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_DDR] = &pll_ddr_clk.common.hw, + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, + [CLK_PLL_ISP] = &pll_isp_clk.common.hw, + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, + [CLK_CPU] = &cpu_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_AHB1] = &ahb1_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_AHB2] = &ahb2_clk.common.hw, + [CLK_BUS_CE] = &bus_ce_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw, + [CLK_BUS_CSI] = &bus_csi_clk.common.hw, + [CLK_BUS_DE] = &bus_de_clk.common.hw, + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw, + [CLK_BUS_PIO] = &bus_pio_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw, + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw, + [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw, + [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw, + [CLK_CE] = &ce_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, + [CLK_DRAM] = &dram_clk.common.hw, + [CLK_DRAM_VE] = &dram_ve_clk.common.hw, + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw, + [CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw, + [CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw, + [CLK_DE] = &de_clk.common.hw, + [CLK_TCON0] = &tcon_clk.common.hw, + [CLK_CSI_MISC] = &csi_misc_clk.common.hw, + [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw, + [CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw, + [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_AC_DIG] = &ac_dig_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_MIPI_CSI] = &mipi_csi_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun8i_v3s_ccu_resets[] = { + [RST_USB_PHY0] = { 0x0cc, BIT(0) }, + + [RST_MBUS] = { 0x0fc, BIT(31) }, + + [RST_BUS_CE] = { 0x2c0, BIT(5) }, + [RST_BUS_DMA] = { 0x2c0, BIT(6) }, + [RST_BUS_MMC0] = { 0x2c0, BIT(8) }, + [RST_BUS_MMC1] = { 0x2c0, BIT(9) }, + [RST_BUS_MMC2] = { 0x2c0, BIT(10) }, + [RST_BUS_DRAM] = { 0x2c0, BIT(14) }, + [RST_BUS_EMAC] = { 0x2c0, BIT(17) }, + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) }, + [RST_BUS_SPI0] = { 0x2c0, BIT(20) }, + [RST_BUS_OTG] = { 0x2c0, BIT(23) }, + [RST_BUS_EHCI0] = { 0x2c0, BIT(26) }, + [RST_BUS_OHCI0] = { 0x2c0, BIT(29) }, + + [RST_BUS_VE] = { 0x2c4, BIT(0) }, + [RST_BUS_TCON0] = { 0x2c4, BIT(3) }, + [RST_BUS_CSI] = { 0x2c4, BIT(8) }, + [RST_BUS_DE] = { 0x2c4, BIT(12) }, + [RST_BUS_DBG] = { 0x2c4, BIT(31) }, + + [RST_BUS_EPHY] = { 0x2c8, BIT(2) }, + + [RST_BUS_CODEC] = { 0x2d0, BIT(0) }, + + [RST_BUS_I2C0] = { 0x2d8, BIT(0) }, + [RST_BUS_I2C1] = { 0x2d8, BIT(1) }, + [RST_BUS_UART0] = { 0x2d8, BIT(16) }, + [RST_BUS_UART1] = { 0x2d8, BIT(17) }, + [RST_BUS_UART2] = { 0x2d8, BIT(18) }, +}; + +static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = { + .ccu_clks = sun8i_v3s_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks), + + .hw_clks = &sun8i_v3s_hw_clks, + + .resets = sun8i_v3s_ccu_resets, + .num_resets = ARRAY_SIZE(sun8i_v3s_ccu_resets), +}; + +static void __init sun8i_v3s_ccu_setup(struct device_node *node) +{ + void __iomem *reg; + u32 val; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("%s: Could not map the clock registers\n", + of_node_full_name(node)); + return; + } + + /* Force the PLL-Audio-1x divider to 4 */ + val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG); + val &= ~GENMASK(19, 16); + writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG); + + sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc); +} +CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu", + sun8i_v3s_ccu_setup); diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h new file mode 100644 index 00000000000000..77fee2a4888ed7 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2016 Icenowy Zheng + * + * Based on ccu-sun8i-h3.h, which is: + * Copyright (c) 2016 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CCU_SUN8I_H3_H_ +#define _CCU_SUN8I_H3_H_ + +#include +#include + +#define CLK_PLL_CPU 0 +#define CLK_PLL_AUDIO_BASE 1 +#define CLK_PLL_AUDIO 2 +#define CLK_PLL_AUDIO_2X 3 +#define CLK_PLL_AUDIO_4X 4 +#define CLK_PLL_AUDIO_8X 5 +#define CLK_PLL_VIDEO 6 +#define CLK_PLL_VE 7 +#define CLK_PLL_DDR 8 +#define CLK_PLL_PERIPH0 9 +#define CLK_PLL_PERIPH0_2X 10 +#define CLK_PLL_ISP 11 +#define CLK_PLL_PERIPH1 12 +/* Reserve one number for not implemented and not used PLL_DDR1 */ + +/* The CPU clock is exported */ + +#define CLK_AXI 15 +#define CLK_AHB1 16 +#define CLK_APB1 17 +#define CLK_APB2 18 +#define CLK_AHB2 19 + +/* All the bus gates are exported */ + +/* The first bunch of module clocks are exported */ + +#define CLK_DRAM 58 + +/* All the DRAM gates are exported */ + +/* Some more module clocks are exported */ + +#define CLK_MBUS 72 + +/* And the GPU module clock is exported */ + +#define CLK_NUMBER (CLK_MIPI_CSI + 1) + +#endif /* _CCU_SUN8I_H3_H_ */ diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index bf28a0fdd569c5..4102841a8ad2f9 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -99,6 +99,7 @@ enum sun4i_usb_phy_type { sun6i_a31_phy, sun8i_a33_phy, sun8i_h3_phy, + sun8i_v3s_phy, sun50i_a64_phy, }; @@ -188,7 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, spin_lock_irqsave(&phy_data->reg_lock, flags); if (phy_data->cfg->type == sun8i_a33_phy || - phy_data->cfg->type == sun50i_a64_phy) { + phy_data->cfg->type == sun50i_a64_phy || + phy_data->cfg->type == sun8i_v3s_phy) { /* A33 or A64 needs us to set phyctl to 0 explicitly */ writel(0, phyctl); } @@ -825,6 +827,15 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .enable_pmu_unk1 = true, }; +static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { + .num_phys = 1, + .type = sun8i_v3s_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, +}; + static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .num_phys = 2, .type = sun50i_a64_phy, @@ -842,6 +853,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, + { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg }, { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg}, { }, diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig index bff1ffc6f01edc..3bd968cec28cb3 100644 --- a/drivers/pinctrl/sunxi/Kconfig +++ b/drivers/pinctrl/sunxi/Kconfig @@ -63,6 +63,10 @@ config PINCTRL_SUN8I_H3_R def_bool MACH_SUN8I select PINCTRL_SUNXI_COMMON +config PINCTRL_SUN8I_V3S + def_bool MACH_SUN8I + select PINCTRL_SUNXI + config PINCTRL_SUN9I_A80 def_bool MACH_SUN9I select PINCTRL_SUNXI diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile index 95f93d0561fc33..9a955851f7f9a8 100644 --- a/drivers/pinctrl/sunxi/Makefile +++ b/drivers/pinctrl/sunxi/Makefile @@ -17,5 +17,6 @@ obj-$(CONFIG_PINCTRL_SUN50I_A64) += pinctrl-sun50i-a64.o obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o +obj-$(CONFIG_PINCTRL_SUN8I_V3S) += pinctrl-sun8i-v3s.o obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c new file mode 100644 index 00000000000000..c86d3c42a90558 --- /dev/null +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c @@ -0,0 +1,321 @@ +/* + * Allwinner V3s SoCs pinctrl driver. + * + * Copyright (C) 2016 Icenowy Zheng + * + * Based on pinctrl-sun8i-h3.c, which is: + * Copyright (C) 2015 Jens Kuske + * + * Based on pinctrl-sun8i-a23.c, which is: + * Copyright (C) 2014 Chen-Yu Tsai + * Copyright (C) 2014 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-sunxi.h" + +static const struct sunxi_desc_pin sun8i_v3s_pins[] = { + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart2"), /* TX */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PB_EINT0 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart2"), /* RX */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PB_EINT1 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart2"), /* RTS */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PB_EINT2 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart2"), /* D1 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PB_EINT3 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "pwm0"), + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PB_EINT4 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "pwm1"), + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PB_EINT5 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PB_EINT6 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 7), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PB_EINT7 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 8), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "i2c1"), /* SDA */ + SUNXI_FUNCTION(0x3, "uart0"), /* TX */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PB_EINT8 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "i2c1"), /* SCK */ + SUNXI_FUNCTION(0x3, "uart0"), /* RX */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PB_EINT9 */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc2"), /* CLK */ + SUNXI_FUNCTION(0x3, "spi0")), /* MISO */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc2"), /* CMD */ + SUNXI_FUNCTION(0x3, "spi0")), /* CLK */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc2"), /* RST */ + SUNXI_FUNCTION(0x3, "spi0")), /* CS */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc2"), /* D0 */ + SUNXI_FUNCTION(0x3, "spi0")), /* MOSI */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* PCLK */ + SUNXI_FUNCTION(0x3, "lcd")), /* CLK */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* MCLK */ + SUNXI_FUNCTION(0x3, "lcd")), /* DE */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */ + SUNXI_FUNCTION(0x3, "lcd")), /* HSYNC */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */ + SUNXI_FUNCTION(0x3, "lcd")), /* VSYNC */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D0 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D2 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D1 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D3 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D2 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D4 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D3 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D5 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D4 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D6 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D5 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D7 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D6 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D10 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D7 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D11 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D8 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D12 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D9 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D13 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D10 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D14 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D11 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D15 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 16), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D12 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D18 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 17), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D13 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D19 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 18), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D14 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D20 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 19), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* D15 */ + SUNXI_FUNCTION(0x3, "lcd")), /* D21 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 20), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* FIELD */ + SUNXI_FUNCTION(0x3, "csi_mipi")), /* MCLK */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 21), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* SCK */ + SUNXI_FUNCTION(0x3, "i2c1"), /* SCK */ + SUNXI_FUNCTION(0x4, "uart1")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 22), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "csi"), /* SDA */ + SUNXI_FUNCTION(0x3, "i2c1"), /* SDA */ + SUNXI_FUNCTION(0x4, "uart1")), /* RX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 23), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x3, "lcd"), /* D22 */ + SUNXI_FUNCTION(0x4, "uart1")), /* RTS */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 24), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x3, "lcd"), /* D23 */ + SUNXI_FUNCTION(0x4, "uart1")), /* CTS */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */ + SUNXI_FUNCTION(0x3, "jtag")), /* MS */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */ + SUNXI_FUNCTION(0x3, "jtag")), /* DI */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */ + SUNXI_FUNCTION(0x3, "uart0")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */ + SUNXI_FUNCTION(0x3, "jtag")), /* DO */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */ + SUNXI_FUNCTION(0x3, "uart0")), /* RX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */ + SUNXI_FUNCTION(0x3, "jtag")), /* CK */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)), /* PG_EINT0 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)), /* PG_EINT1 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)), /* PG_EINT2 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)), /* PG_EINT3 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)), /* PG_EINT4 */ + SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5), + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */ + SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)), /* PG_EINT5 */ +}; + +static const struct sunxi_pinctrl_desc sun8i_v3s_pinctrl_data = { + .pins = sun8i_v3s_pins, + .npins = ARRAY_SIZE(sun8i_v3s_pins), + .irq_banks = 2, + .irq_read_needs_mux = true +}; + +static int sun8i_v3s_pinctrl_probe(struct platform_device *pdev) +{ + return sunxi_pinctrl_init(pdev, + &sun8i_v3s_pinctrl_data); +} + +static const struct of_device_id sun8i_v3s_pinctrl_match[] = { + { .compatible = "allwinner,sun8i-v3s-pinctrl", }, + {} +}; + +static struct platform_driver sun8i_v3s_pinctrl_driver = { + .probe = sun8i_v3s_pinctrl_probe, + .driver = { + .name = "sun8i-v3s-pinctrl", + .of_match_table = sun8i_v3s_pinctrl_match, + }, +}; +builtin_platform_driver(sun8i_v3s_pinctrl_driver); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d0be0eadd0d940..48ecb1580817a3 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -645,6 +645,20 @@ static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), }; +/* H3/V3s OTG supports only 4 endpoints */ +#define SUNXI_MUSB_MAX_EP_NUM_H3 5 + +static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), +}; + static struct musb_hdrc_config sunxi_musb_hdrc_config = { .fifo_cfg = sunxi_musb_mode_cfg, .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), @@ -656,6 +670,18 @@ static struct musb_hdrc_config sunxi_musb_hdrc_config = { .dma = 0, }; +static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { + .fifo_cfg = sunxi_musb_mode_cfg_h3, + .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), + .multipoint = true, + .dyn_fifo = true, + .soft_con = true, + .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, + .ram_bits = SUNXI_MUSB_RAM_BITS, + .dma = 0, +}; + + static int sunxi_musb_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data pdata; @@ -698,7 +724,10 @@ static int sunxi_musb_probe(struct platform_device *pdev) return -EINVAL; } pdata.platform_ops = &sunxi_musb_ops; - pdata.config = &sunxi_musb_hdrc_config; + if (!of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) + pdata.config = &sunxi_musb_hdrc_config; + else + pdata.config = &sunxi_musb_hdrc_config_h3; glue->dev = &pdev->dev; INIT_WORK(&glue->work, sunxi_musb_work); @@ -710,7 +739,8 @@ static int sunxi_musb_probe(struct platform_device *pdev) if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); - if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb")) { + if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") || + of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) { set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags); } @@ -804,6 +834,7 @@ static const struct of_device_id sunxi_musb_match[] = { { .compatible = "allwinner,sun4i-a10-musb", }, { .compatible = "allwinner,sun6i-a31-musb", }, { .compatible = "allwinner,sun8i-a33-musb", }, + { .compatible = "allwinner,sun8i-h3-musb", }, {} }; MODULE_DEVICE_TABLE(of, sunxi_musb_match); diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h new file mode 100644 index 00000000000000..c0d5d5599c87f5 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2016 Icenowy Zheng + * + * Based on sun8i-h3-ccu.h, which is: + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_ +#define _DT_BINDINGS_CLK_SUN8I_V3S_H_ + +#define CLK_CPU 14 + +#define CLK_BUS_CE 20 +#define CLK_BUS_DMA 21 +#define CLK_BUS_MMC0 22 +#define CLK_BUS_MMC1 23 +#define CLK_BUS_MMC2 24 +#define CLK_BUS_DRAM 25 +#define CLK_BUS_EMAC 26 +#define CLK_BUS_HSTIMER 27 +#define CLK_BUS_SPI0 28 +#define CLK_BUS_OTG 29 +#define CLK_BUS_EHCI0 30 +#define CLK_BUS_OHCI0 31 +#define CLK_BUS_VE 32 +#define CLK_BUS_TCON0 33 +#define CLK_BUS_CSI 34 +#define CLK_BUS_DE 35 +#define CLK_BUS_CODEC 36 +#define CLK_BUS_PIO 37 +#define CLK_BUS_I2C0 38 +#define CLK_BUS_I2C1 39 +#define CLK_BUS_UART0 40 +#define CLK_BUS_UART1 41 +#define CLK_BUS_UART2 42 +#define CLK_BUS_EPHY 43 +#define CLK_BUS_DBG 44 + +#define CLK_MMC0 45 +#define CLK_MMC0_SAMPLE 46 +#define CLK_MMC0_OUTPUT 47 +#define CLK_MMC1 48 +#define CLK_MMC1_SAMPLE 49 +#define CLK_MMC1_OUTPUT 50 +#define CLK_MMC2 51 +#define CLK_MMC2_SAMPLE 52 +#define CLK_MMC2_OUTPUT 53 +#define CLK_CE 54 +#define CLK_SPI0 55 +#define CLK_USB_PHY0 56 +#define CLK_USB_OHCI0 57 + +#define CLK_DRAM_VE 59 +#define CLK_DRAM_CSI 60 +#define CLK_DRAM_EHCI 61 +#define CLK_DRAM_OHCI 62 +#define CLK_DE 63 +#define CLK_TCON0 64 +#define CLK_CSI_MISC 65 +#define CLK_CSI0_MCLK 66 +#define CLK_CSI1_SCLK 67 +#define CLK_CSI1_MCLK 68 +#define CLK_VE 69 +#define CLK_AC_DIG 70 +#define CLK_AVS 71 + +#define CLK_MIPI_CSI 73 + +#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */ diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h new file mode 100644 index 00000000000000..b58ef21a2e18d6 --- /dev/null +++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2016 Icenowy Zheng + * + * Based on sun8i-v3s-ccu.h, which is + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_ +#define _DT_BINDINGS_RST_SUN8I_V3S_H_ + +#define RST_USB_PHY0 0 + +#define RST_MBUS 1 + +#define RST_BUS_CE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MMC0 7 +#define RST_BUS_MMC1 8 +#define RST_BUS_MMC2 9 +#define RST_BUS_DRAM 11 +#define RST_BUS_EMAC 12 +#define RST_BUS_HSTIMER 14 +#define RST_BUS_SPI0 15 +#define RST_BUS_OTG 17 +#define RST_BUS_EHCI0 18 +#define RST_BUS_OHCI0 22 +#define RST_BUS_VE 26 +#define RST_BUS_TCON0 27 +#define RST_BUS_CSI 30 +#define RST_BUS_DE 34 +#define RST_BUS_DBG 38 +#define RST_BUS_EPHY 39 +#define RST_BUS_CODEC 40 +#define RST_BUS_I2C0 46 +#define RST_BUS_I2C1 47 +#define RST_BUS_UART0 49 +#define RST_BUS_UART1 50 +#define RST_BUS_UART2 51 + +#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */