===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M140 S{BED_TEMP}
	
	G90
	
	SET_GCODE_OFFSET Z=0.0
	
	G28
	G0 X5
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	M83
	BED_MESH_PROFILE load=default
	G92 E0
	G1 Z2.0 F3000
	G1 X18 Y10 Z0.3 F5000.0
	G1 X18 Y10 Z0.3 F1500.0 E30
	G1 X18.4 Y185.0 Z0.3 F5000.0
	G1 X18.4 Y10 Z0.3 F1500.0 E30
	G1 X18.8 Y185.0 Z0.3 F5000.0
	G1 X18.8 Y10 Z0.3 F1500.0 E30
	G92 E0
	G1 Z2.0 F3000
	G1 X5 Y20 Z0.3 F5000.0

[gcode_macro speed_settings]
gcode = 
	SET_RETRACTION RECTRACT_LENGTH=0;
	SET_PRESSURE_ADVANCE ADVANCE=0;

[gcode_macro benchy_test_start]
gcode = 
	speed_settings
	BED_MESH_PROFILE load=default
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION

[gcode_macro benchy_test_end]
gcode = 
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro end_print]
gcode = 
	G91
	G1 E-2 F2700
	G1 E-2 Z0.2 F2400
	G1 X5 Y5 F3000
	G1 Z10
	G90
	G1 X0 Y180
	M104 S0
	M140 S0
	M84 X Y E

[gcode_macro G29]
gcode = 
	M140 S70
	M190 S70
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE METHOD=AUTOMATIC
	BED_MESH_PROFILE LOAD=default
	SAVE_CONFIG

[filament_switch_sensor filament_runout_sensor]
switch_pin = PC15
runout_gcode = 
	hold_hotend_temp
	M104 S0
	
	PAUSE
insert_gcode = 
	
	M104 S{hotend_temp}
	G4 P10000
	G1 E20 F400

[gcode_macro hold_hotend_temp]
variable_hotend_temp = 0
gcode = 
	
	SET_GCODE_VARIABLE MACRO=hold_hotend_temp VARIABLE=hotend_temp VALUE={printer.extruder.temperature}

[printer]
kinematics = corexz
max_velocity = 2822.0
max_z_velocity = 2448
max_accel = 27945
max_z_accel = 20400
square_corner_velocity = 15

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3C002D001450415833323520-if00
restart_method = command

[mcu pico]
serial = /dev/serial/by-id/usb-Klipper_rp2040_454741505C0BD4AA-if00

[stepper_x]
step_pin = pico: gpio4
dir_pin = pico: gpio1
enable_pin = !pico: gpio5
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 220
position_min = 0
homing_speed = 75
second_homing_speed = 20

[tmc5160 stepper_x]
cs_pin = pico: gpio6
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[stepper_y]
step_pin = pico: gpio9
dir_pin = pico: gpio8
enable_pin = !pico: gpio10
microsteps = 128
rotation_distance = 120
endstop_pin = ^PC1
position_endstop = 0
position_max = 190
position_min = 0
homing_speed = 75
second_homing_speed = 10
homing_retract_dist = 10.0

[tmc5160 stepper_y]
cs_pin = pico: gpio11
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 5
hold_current = 2.5
sense_resistor = 0.022
interpolate = true
driver_tbl = 3
driver_toff = 3
driver_hstrt = 2
driver_hend = 3
driver_tpfd = 10
driver_chm = 0

[stepper_z]
step_pin = pico: gpio14
dir_pin = !pico: gpio13
enable_pin = !pico: gpio15
microsteps = 16
rotation_distance = 40
endstop_pin = probe:z_virtual_endstop
position_min = -5
position_max = 250

[tmc5160 stepper_z]
cs_pin = pico: gpio17
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[thermistor Trianglelab NTC100K B3950]
temperature1 = 25.0
resistance1 = 103180.0
temperature2 = 150.0
resistance2 = 1366.2
temperature3 = 250.0
resistance3 = 168.6

[multi_pin multi_heater]
pins = PC8, pico:gpio28, pico:gpio26, pico:gpio25

[extruder]
control = watermark
filament_diameter = 1.75
max_extrude_cross_section = 50.0
max_extrude_only_distance = 500.0
max_extrude_only_velocity = 120
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 16
rotation_distance = 4.637
nozzle_diameter = 0.500
heater_pin = multi_pin:multi_heater
sensor_type = Trianglelab NTC100K B3950
sensor_pin = PA0
min_temp = 0
max_temp = 300
pressure_advance = 0.02
pressure_advance_smooth_time = 0.01
min_extrude_temp = 0
pid_kp = 12.147
pid_ki = 0.789
pid_kd = 46.764
block_heat_capacity = 42.3195
sensor_responsiveness = 0.103970
ambient_transfer = 0.203696
fan_ambient_transfer = 0.203696, 0.274226, 0.369183

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
uart_address = 3
run_current = 0.85
hold_current = 0.400
interpolate = true
driver_tbl = 0
driver_hend = 6
driver_hstrt = 7
driver_toff = 4

[heater_bed]
control = watermark
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 130

[controller_fan electronics_fan]
pin = PC7

[heater_fan hot_end_fan]
pin = PB15
heater = extruder
heater_temp = 30.0

[fan]
pin = PC6
kick_start_time = 0.100
off_below = 0.5

[bltouch]
sensor_pin = ^PC14
control_pin = PA1
pin_up_touch_mode_reports_triggered = True
probe_with_touch_mode = True
x_offset = -2
y_offset = -24
sample_retract_dist = 6.0
lift_speed = 100
samples_tolerance_retries = 3
speed = 30
samples = 2
z_offset = 2.330

[safe_z_home]
home_xy_position = 110, 125
speed = 300
z_hop = 10
z_hop_speed = 100

[bed_mesh]
speed = 300
horizontal_move_z = 6
mesh_min = 40, 15
mesh_max = 190, 160
probe_count = 20,20
mesh_pps = 5, 5
algorithm = bicubic
bicubic_tension = 0.2

[screws_tilt_adjust]
horizontal_move_z = 5
screw1 = 60,192
screw1_name = back left
screw2 = 230,192
screw2_name = back right
screw3 = 60,22
screw3_name = front left
screw4 = 230,22
screw4_name = front right

[firmware_retraction]
retract_length = 1.2
retract_speed = 120
unretract_speed = 120

[idle_timeout]
timeout = 1000
gcode = 
	{% if printer.pause_resume.is_paused %}
	M104 S0
	M117 "Timeout ignored because printer state == paused."
	{% else %}
	M18
	M104 S0
	M140 S0
	M117
	{% endif %}

[exclude_object]

[gcode_macro M486]
gcode = 
	
	
	
	
	
	
	
	
	
	
	
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[bed_mesh default]
version = 1
points = 
	-0.250000, -0.178125, -0.221875, -0.196875, -0.146875, -0.150000, -0.153125, -0.153125, -0.140625, -0.128125, -0.131250, -0.121875, -0.134375, -0.115625, -0.103125, -0.100000, -0.115625, -0.121875, -0.096875, -0.053125
	-0.237500, -0.171875, -0.190625, -0.190625, -0.140625, -0.137500, -0.128125, -0.134375, -0.121875, -0.103125, -0.100000, -0.096875, -0.109375, -0.096875, -0.090625, -0.075000, -0.090625, -0.103125, -0.103125, -0.065625
	-0.225000, -0.190625, -0.103125, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.096875, -0.093750, -0.090625, -0.096875, -0.078125, -0.065625, -0.056250, -0.071875, -0.065625, -0.059375, -0.028125
	-0.231250, -0.196875, -0.184375, -0.178125, -0.140625, -0.112500, -0.109375, -0.109375, -0.109375, -0.090625, -0.062500, -0.078125, -0.078125, -0.059375, -0.053125, -0.043750, -0.046875, -0.059375, -0.065625, -0.015625
	-0.225000, -0.196875, -0.184375, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.090625, -0.081250, -0.078125, -0.078125, -0.065625, -0.053125, -0.018750, -0.021875, -0.034375, -0.040625, -0.003125
	-0.218750, -0.196875, -0.171875, -0.171875, -0.121875, -0.100000, -0.096875, -0.096875, -0.096875, -0.053125, -0.062500, -0.059375, -0.059375, -0.059375, -0.046875, -0.031250, -0.028125, -0.009375, -0.046875, -0.003125
	-0.212500, -0.184375, -0.178125, -0.165625, -0.134375, -0.125000, -0.103125, -0.103125, -0.034375, -0.090625, -0.075000, -0.078125, -0.078125, -0.065625, -0.046875, -0.043750, -0.015625, -0.034375, -0.040625, -0.003125
	-0.206250, -0.171875, -0.153125, -0.165625, -0.121875, -0.106250, -0.096875, -0.096875, -0.096875, -0.078125, -0.068750, -0.065625, -0.059375, -0.059375, -0.040625, -0.031250, 0.009375, -0.034375, -0.040625, 0.003125
	-0.206250, -0.090625, -0.159375, -0.165625, -0.121875, -0.100000, -0.090625, -0.103125, -0.103125, -0.090625, -0.081250, -0.078125, -0.084375, -0.065625, -0.046875, -0.037500, -0.046875, -0.046875, -0.028125, -0.003125
	-0.206250, -0.184375, -0.146875, -0.171875, -0.128125, -0.118750, -0.096875, -0.096875, -0.109375, -0.096875, -0.081250, -0.078125, -0.084375, -0.065625, -0.053125, -0.037500, -0.053125, -0.046875, -0.059375, -0.015625
	-0.200000, -0.178125, -0.171875, -0.190625, -0.153125, -0.118750, -0.103125, -0.128125, -0.115625, -0.096875, -0.093750, -0.084375, -0.084375, -0.065625, -0.053125, -0.043750, -0.046875, -0.059375, -0.059375, -0.015625
	-0.218750, -0.190625, -0.190625, -0.184375, -0.153125, -0.106250, -0.109375, -0.121875, -0.121875, -0.090625, -0.075000, -0.078125, -0.071875, -0.071875, -0.053125, -0.043750, -0.059375, -0.040625, -0.065625, -0.034375
	-0.218750, -0.196875, -0.203125, -0.190625, -0.153125, -0.143750, -0.134375, -0.140625, -0.115625, -0.096875, -0.081250, -0.090625, -0.103125, -0.090625, -0.065625, -0.068750, -0.065625, -0.065625, -0.071875, -0.028125
	-0.225000, -0.196875, -0.184375, -0.184375, -0.153125, -0.131250, -0.109375, -0.134375, -0.128125, -0.096875, -0.100000, -0.090625, -0.096875, -0.084375, -0.065625, -0.056250, -0.065625, -0.078125, -0.065625, -0.046875
	-0.237500, -0.203125, -0.196875, -0.196875, -0.165625, -0.162500, -0.140625, -0.134375, -0.140625, -0.115625, -0.106250, -0.096875, -0.115625, -0.096875, -0.065625, -0.056250, -0.065625, -0.065625, -0.071875, -0.021875
	-0.231250, -0.196875, -0.221875, -0.196875, -0.203125, -0.175000, -0.153125, -0.146875, -0.121875, -0.109375, -0.100000, -0.096875, -0.096875, -0.084375, -0.078125, -0.056250, -0.071875, -0.084375, -0.084375, -0.046875
	-0.243750, -0.209375, -0.228125, -0.215625, -0.190625, -0.181250, -0.165625, -0.153125, -0.140625, -0.128125, -0.131250, -0.109375, -0.115625, -0.115625, -0.103125, -0.087500, -0.090625, -0.078125, -0.096875, -0.059375
	-0.268750, -0.234375, -0.234375, -0.209375, -0.190625, -0.168750, -0.153125, -0.153125, -0.140625, -0.121875, -0.106250, -0.115625, -0.128125, -0.109375, -0.103125, -0.087500, -0.090625, -0.103125, -0.109375, -0.071875
	-0.275000, -0.234375, -0.246875, -0.228125, -0.203125, -0.193750, -0.190625, -0.178125, -0.159375, -0.153125, -0.156250, -0.140625, -0.153125, -0.134375, -0.128125, -0.106250, -0.109375, -0.115625, -0.115625, -0.065625
	-0.287500, -0.259375, -0.259375, -0.234375, -0.203125, -0.193750, -0.190625, -0.178125, -0.165625, -0.146875, -0.143750, -0.128125, -0.140625, -0.121875, -0.115625, -0.093750, -0.103125, -0.115625, -0.115625, -0.084375
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 20
mesh_y_pps = 5
min_y = 15.0
x_count = 20
max_y = 159.97
mesh_x_pps = 5
max_x = 189.91
=======================
Loaded MCU 'mcu' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Loaded MCU 'pico' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'pico' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'pico' (1024 moves)
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-263-g0087f04c-dirty'
Modified files: klippy/extras/tmc5160.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 548377292912: {'program': 'Moonraker', 'version': 'v0.8.0-384-g8f3b30a'}
=============== Log rollover at Sun Jul 14 04:32:01 2024 ===============
Stats 42.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1543 bytes_read=6552 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998654 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2804 bytes_read=6056 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999968 adj=12000335  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=1.10 cputime=3.350 memavail=688036 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 43.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1549 bytes_read=6658 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998640 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2810 bytes_read=6072 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999966 adj=12000311  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=1.10 cputime=3.364 memavail=685556 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 44.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1555 bytes_read=6764 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998635 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2816 bytes_read=6099 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999964 adj=12000290  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=1.10 cputime=3.376 memavail=684176 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 45.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1561 bytes_read=6914 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998662 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2822 bytes_read=6115 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999964 adj=12000269  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=1.01 cputime=3.392 memavail=688172 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 46.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1567 bytes_read=7020 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998677 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2828 bytes_read=6131 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999967 adj=12000233  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=1.01 cputime=3.409 memavail=688172 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 47.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1573 bytes_read=7126 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998683 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2834 bytes_read=6147 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000225  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=1.01 cputime=3.424 memavail=686076 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 48.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1579 bytes_read=7262 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998684 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2840 bytes_read=6163 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000231  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=1.01 cputime=3.439 memavail=685092 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 49.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1585 bytes_read=7368 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998677 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2846 bytes_read=6190 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999968 adj=12000226  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=1.01 cputime=3.452 memavail=682232 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 50.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1591 bytes_read=7488 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998665 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2852 bytes_read=6206 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999967 adj=12000223  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.93 cputime=3.462 memavail=682256 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 51.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1597 bytes_read=7624 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998653 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2858 bytes_read=6222 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999967 adj=12000233  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.93 cputime=3.472 memavail=682256 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 52.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1603 bytes_read=7730 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998644 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2864 bytes_read=6238 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999967 adj=12000289  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.93 cputime=3.484 memavail=682256 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 53.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1609 bytes_read=7836 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998656 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2870 bytes_read=6254 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999968 adj=12000281  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.93 cputime=3.502 memavail=682256 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 54.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1615 bytes_read=7972 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998663 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2876 bytes_read=6281 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000259  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.93 cputime=3.521 memavail=682264 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 55.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1621 bytes_read=8092 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998664 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2882 bytes_read=6297 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000248  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.94 cputime=3.534 memavail=681024 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 56.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1627 bytes_read=8198 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998661 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2888 bytes_read=6313 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000245  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.94 cputime=3.547 memavail=683064 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 57.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1633 bytes_read=8334 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998655 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2894 bytes_read=6329 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000248  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.94 cputime=3.558 memavail=683820 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 58.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1639 bytes_read=8440 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998651 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2900 bytes_read=6345 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000246  heater_bed: target=0 temp=25.4 pwm=0.000 sysload=0.94 cputime=3.567 memavail=684080 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 59.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1645 bytes_read=8546 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998648 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2906 bytes_read=6372 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999968 adj=12000241  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.94 cputime=3.577 memavail=684092 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 60.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1651 bytes_read=8696 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998657 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2912 bytes_read=6388 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000233  heater_bed: target=0 temp=24.4 pwm=0.000 sysload=0.86 cputime=3.594 memavail=684092 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 61.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1657 bytes_read=8802 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998664 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2918 bytes_read=6404 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000226  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.86 cputime=3.610 memavail=684092 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 62.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1663 bytes_read=8908 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998671 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2924 bytes_read=6420 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000220  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.86 cputime=3.625 memavail=684264 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 63.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1669 bytes_read=9044 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998670 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2930 bytes_read=6436 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000214  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.86 cputime=3.639 memavail=684064 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 64.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1675 bytes_read=9150 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998667 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2936 bytes_read=6463 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000219  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.86 cputime=3.651 memavail=684316 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 65.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1681 bytes_read=9270 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998666 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2948 bytes_read=6495 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000220  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.79 cputime=3.662 memavail=684368 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 66.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1687 bytes_read=9406 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998662 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2954 bytes_read=6511 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000212  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.79 cputime=3.673 memavail=684368 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 67.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1693 bytes_read=9512 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998660 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2960 bytes_read=6527 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000217  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.79 cputime=3.684 memavail=684368 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 68.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1699 bytes_read=9618 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998669 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2966 bytes_read=6543 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000233  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.79 cputime=3.701 memavail=685068 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 69.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1705 bytes_read=9754 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998672 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2972 bytes_read=6570 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.79 cputime=3.719 memavail=684908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 70.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1711 bytes_read=9874 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998669 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2978 bytes_read=6586 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000229  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.81 cputime=3.733 memavail=680044 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 71.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1717 bytes_read=9980 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998668 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2984 bytes_read=6602 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000228  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.81 cputime=3.746 memavail=680888 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 72.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1723 bytes_read=10116 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998667 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2990 bytes_read=6618 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000227  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.81 cputime=3.758 memavail=683668 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 73.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1729 bytes_read=10222 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998664 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2996 bytes_read=6634 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000222  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.81 cputime=3.768 memavail=683424 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 74.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1735 bytes_read=10328 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998662 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3002 bytes_read=6661 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000222  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.81 cputime=3.779 memavail=683292 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 75.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1741 bytes_read=10478 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998661 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3008 bytes_read=6677 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000224  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.83 cputime=3.816 memavail=683120 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 76.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1747 bytes_read=10584 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998658 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3014 bytes_read=6693 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000221  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.83 cputime=3.833 memavail=683120 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 77.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1759 bytes_read=10706 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998657 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3020 bytes_read=6709 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000220  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.83 cputime=3.853 memavail=681072 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 78.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1765 bytes_read=10842 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998658 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3026 bytes_read=6725 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999969 adj=12000224  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.83 cputime=3.875 memavail=683360 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 79.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1771 bytes_read=10948 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998657 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3032 bytes_read=6752 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.83 cputime=3.895 memavail=680856 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 80.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1777 bytes_read=11068 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998660 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3038 bytes_read=6768 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000227  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.76 cputime=3.921 memavail=680908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 81.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1783 bytes_read=11204 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998662 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3044 bytes_read=6784 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999970 adj=12000226  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.76 cputime=3.950 memavail=680908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 82.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1789 bytes_read=11310 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998663 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3050 bytes_read=6800 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000223  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.76 cputime=3.979 memavail=680908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 83.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1795 bytes_read=11416 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998667 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3056 bytes_read=6816 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000226  heater_bed: target=0 temp=24.6 pwm=0.000 sysload=0.76 cputime=4.007 memavail=680908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 84.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1801 bytes_read=11552 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998670 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3062 bytes_read=6843 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000224  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.76 cputime=4.039 memavail=680908 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 85.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1807 bytes_read=11658 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998669 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3068 bytes_read=6859 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999972 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.94 cputime=4.064 memavail=685712 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 86.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1813 bytes_read=11773 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998668 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3074 bytes_read=6875 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000221  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.94 cputime=4.085 memavail=686608 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 87.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1819 bytes_read=11900 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998666 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3080 bytes_read=6891 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000219  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.94 cputime=4.104 memavail=685860 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 88.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1825 bytes_read=11999 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998665 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3086 bytes_read=6907 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999971 adj=12000219  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.94 cputime=4.122 memavail=685412 print_time=127918.208 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-263-g0087f04c'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Jul 14 04:36:17 2024 (1720949777.1 298.1)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M140 S{BED_TEMP}
	
	G90
	
	SET_GCODE_OFFSET Z=0.0
	
	G28
	G0 X5
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	M83
	BED_MESH_PROFILE load=default
	G92 E0
	G1 Z2.0 F3000
	G1 X18 Y10 Z0.3 F5000.0
	G1 X18 Y10 Z0.3 F1500.0 E30
	G1 X18.4 Y185.0 Z0.3 F5000.0
	G1 X18.4 Y10 Z0.3 F1500.0 E30
	G1 X18.8 Y185.0 Z0.3 F5000.0
	G1 X18.8 Y10 Z0.3 F1500.0 E30
	G92 E0
	G1 Z2.0 F3000
	G1 X5 Y20 Z0.3 F5000.0

[gcode_macro speed_settings]
gcode = 
	SET_RETRACTION RECTRACT_LENGTH=0;
	SET_PRESSURE_ADVANCE ADVANCE=0;

[gcode_macro benchy_test_start]
gcode = 
	speed_settings
	BED_MESH_PROFILE load=default
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION

[gcode_macro benchy_test_end]
gcode = 
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro end_print]
gcode = 
	G91
	G1 E-2 F2700
	G1 E-2 Z0.2 F2400
	G1 X5 Y5 F3000
	G1 Z10
	G90
	G1 X0 Y180
	M104 S0
	M140 S0
	M84 X Y E

[gcode_macro G29]
gcode = 
	M140 S70
	M190 S70
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE METHOD=AUTOMATIC
	BED_MESH_PROFILE LOAD=default
	SAVE_CONFIG

[filament_switch_sensor filament_runout_sensor]
switch_pin = PC15
runout_gcode = 
	hold_hotend_temp
	M104 S0
	
	PAUSE
insert_gcode = 
	
	M104 S{hotend_temp}
	G4 P10000
	G1 E20 F400

[gcode_macro hold_hotend_temp]
variable_hotend_temp = 0
gcode = 
	
	SET_GCODE_VARIABLE MACRO=hold_hotend_temp VARIABLE=hotend_temp VALUE={printer.extruder.temperature}

[printer]
kinematics = corexz
max_velocity = 2822.0
max_z_velocity = 2448
max_accel = 27945
max_z_accel = 20400
square_corner_velocity = 15

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3C002D001450415833323520-if00
restart_method = command

[mcu pico]
serial = /dev/serial/by-id/usb-Klipper_rp2040_454741505C0BD4AA-if00

[stepper_x]
step_pin = pico: gpio4
dir_pin = pico: gpio1
enable_pin = !pico: gpio5
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 220
position_min = 0
homing_speed = 75
second_homing_speed = 20

[tmc5160 stepper_x]
cs_pin = pico: gpio6
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[stepper_y]
step_pin = pico: gpio9
dir_pin = pico: gpio8
enable_pin = !pico: gpio10
microsteps = 128
rotation_distance = 120
endstop_pin = ^PC1
position_endstop = 0
position_max = 190
position_min = 0
homing_speed = 75
second_homing_speed = 10
homing_retract_dist = 10.0

[tmc5160 stepper_y]
cs_pin = pico: gpio11
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 5
hold_current = 2.5
sense_resistor = 0.022
interpolate = true
driver_tbl = 3
driver_toff = 3
driver_hstrt = 2
driver_hend = 3
driver_tpfd = 10
driver_chm = 0

[stepper_z]
step_pin = pico: gpio14
dir_pin = !pico: gpio13
enable_pin = !pico: gpio15
microsteps = 16
rotation_distance = 40
endstop_pin = probe:z_virtual_endstop
position_min = -5
position_max = 250

[tmc5160 stepper_z]
cs_pin = pico: gpio17
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[thermistor Trianglelab NTC100K B3950]
temperature1 = 25.0
resistance1 = 103180.0
temperature2 = 150.0
resistance2 = 1366.2
temperature3 = 250.0
resistance3 = 168.6

[multi_pin multi_heater]
pins = PC8, pico:gpio28, pico:gpio26, pico:gpio25

[extruder]
control = watermark
filament_diameter = 1.75
max_extrude_cross_section = 50.0
max_extrude_only_distance = 500.0
max_extrude_only_velocity = 120
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 16
rotation_distance = 4.637
nozzle_diameter = 0.500
heater_pin = multi_pin:multi_heater
sensor_type = Trianglelab NTC100K B3950
sensor_pin = PA0
min_temp = 0
max_temp = 300
pressure_advance = 0.02
pressure_advance_smooth_time = 0.01
min_extrude_temp = 0
pid_kp = 12.147
pid_ki = 0.789
pid_kd = 46.764
block_heat_capacity = 42.3195
sensor_responsiveness = 0.103970
ambient_transfer = 0.203696
fan_ambient_transfer = 0.203696, 0.274226, 0.369183

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
uart_address = 3
run_current = 0.85
hold_current = 0.400
interpolate = true
driver_tbl = 0
driver_hend = 6
driver_hstrt = 7
driver_toff = 4

[heater_bed]
control = watermark
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 130

[controller_fan electronics_fan]
pin = PC7

[heater_fan hot_end_fan]
pin = PB15
heater = extruder
heater_temp = 30.0

[fan]
pin = PC6
kick_start_time = 0.100
off_below = 0.5

[bltouch]
sensor_pin = ^PC14
control_pin = PA1
pin_up_touch_mode_reports_triggered = True
probe_with_touch_mode = True
x_offset = -2
y_offset = -24
sample_retract_dist = 6.0
lift_speed = 100
samples_tolerance_retries = 3
speed = 30
samples = 2
z_offset = 2.330

[safe_z_home]
home_xy_position = 110, 125
speed = 300
z_hop = 10
z_hop_speed = 100

[bed_mesh]
speed = 300
horizontal_move_z = 6
mesh_min = 40, 15
mesh_max = 190, 160
probe_count = 20,20
mesh_pps = 5, 5
algorithm = bicubic
bicubic_tension = 0.2

[screws_tilt_adjust]
horizontal_move_z = 5
screw1 = 60,192
screw1_name = back left
screw2 = 230,192
screw2_name = back right
screw3 = 60,22
screw3_name = front left
screw4 = 230,22
screw4_name = front right

[firmware_retraction]
retract_length = 1.2
retract_speed = 120
unretract_speed = 120

[idle_timeout]
timeout = 1000
gcode = 
	{% if printer.pause_resume.is_paused %}
	M104 S0
	M117 "Timeout ignored because printer state == paused."
	{% else %}
	M18
	M104 S0
	M140 S0
	M117
	{% endif %}

[exclude_object]

[gcode_macro M486]
gcode = 
	
	
	
	
	
	
	
	
	
	
	
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[bed_mesh default]
version = 1
points = 
	-0.250000, -0.178125, -0.221875, -0.196875, -0.146875, -0.150000, -0.153125, -0.153125, -0.140625, -0.128125, -0.131250, -0.121875, -0.134375, -0.115625, -0.103125, -0.100000, -0.115625, -0.121875, -0.096875, -0.053125
	-0.237500, -0.171875, -0.190625, -0.190625, -0.140625, -0.137500, -0.128125, -0.134375, -0.121875, -0.103125, -0.100000, -0.096875, -0.109375, -0.096875, -0.090625, -0.075000, -0.090625, -0.103125, -0.103125, -0.065625
	-0.225000, -0.190625, -0.103125, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.096875, -0.093750, -0.090625, -0.096875, -0.078125, -0.065625, -0.056250, -0.071875, -0.065625, -0.059375, -0.028125
	-0.231250, -0.196875, -0.184375, -0.178125, -0.140625, -0.112500, -0.109375, -0.109375, -0.109375, -0.090625, -0.062500, -0.078125, -0.078125, -0.059375, -0.053125, -0.043750, -0.046875, -0.059375, -0.065625, -0.015625
	-0.225000, -0.196875, -0.184375, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.090625, -0.081250, -0.078125, -0.078125, -0.065625, -0.053125, -0.018750, -0.021875, -0.034375, -0.040625, -0.003125
	-0.218750, -0.196875, -0.171875, -0.171875, -0.121875, -0.100000, -0.096875, -0.096875, -0.096875, -0.053125, -0.062500, -0.059375, -0.059375, -0.059375, -0.046875, -0.031250, -0.028125, -0.009375, -0.046875, -0.003125
	-0.212500, -0.184375, -0.178125, -0.165625, -0.134375, -0.125000, -0.103125, -0.103125, -0.034375, -0.090625, -0.075000, -0.078125, -0.078125, -0.065625, -0.046875, -0.043750, -0.015625, -0.034375, -0.040625, -0.003125
	-0.206250, -0.171875, -0.153125, -0.165625, -0.121875, -0.106250, -0.096875, -0.096875, -0.096875, -0.078125, -0.068750, -0.065625, -0.059375, -0.059375, -0.040625, -0.031250, 0.009375, -0.034375, -0.040625, 0.003125
	-0.206250, -0.090625, -0.159375, -0.165625, -0.121875, -0.100000, -0.090625, -0.103125, -0.103125, -0.090625, -0.081250, -0.078125, -0.084375, -0.065625, -0.046875, -0.037500, -0.046875, -0.046875, -0.028125, -0.003125
	-0.206250, -0.184375, -0.146875, -0.171875, -0.128125, -0.118750, -0.096875, -0.096875, -0.109375, -0.096875, -0.081250, -0.078125, -0.084375, -0.065625, -0.053125, -0.037500, -0.053125, -0.046875, -0.059375, -0.015625
	-0.200000, -0.178125, -0.171875, -0.190625, -0.153125, -0.118750, -0.103125, -0.128125, -0.115625, -0.096875, -0.093750, -0.084375, -0.084375, -0.065625, -0.053125, -0.043750, -0.046875, -0.059375, -0.059375, -0.015625
	-0.218750, -0.190625, -0.190625, -0.184375, -0.153125, -0.106250, -0.109375, -0.121875, -0.121875, -0.090625, -0.075000, -0.078125, -0.071875, -0.071875, -0.053125, -0.043750, -0.059375, -0.040625, -0.065625, -0.034375
	-0.218750, -0.196875, -0.203125, -0.190625, -0.153125, -0.143750, -0.134375, -0.140625, -0.115625, -0.096875, -0.081250, -0.090625, -0.103125, -0.090625, -0.065625, -0.068750, -0.065625, -0.065625, -0.071875, -0.028125
	-0.225000, -0.196875, -0.184375, -0.184375, -0.153125, -0.131250, -0.109375, -0.134375, -0.128125, -0.096875, -0.100000, -0.090625, -0.096875, -0.084375, -0.065625, -0.056250, -0.065625, -0.078125, -0.065625, -0.046875
	-0.237500, -0.203125, -0.196875, -0.196875, -0.165625, -0.162500, -0.140625, -0.134375, -0.140625, -0.115625, -0.106250, -0.096875, -0.115625, -0.096875, -0.065625, -0.056250, -0.065625, -0.065625, -0.071875, -0.021875
	-0.231250, -0.196875, -0.221875, -0.196875, -0.203125, -0.175000, -0.153125, -0.146875, -0.121875, -0.109375, -0.100000, -0.096875, -0.096875, -0.084375, -0.078125, -0.056250, -0.071875, -0.084375, -0.084375, -0.046875
	-0.243750, -0.209375, -0.228125, -0.215625, -0.190625, -0.181250, -0.165625, -0.153125, -0.140625, -0.128125, -0.131250, -0.109375, -0.115625, -0.115625, -0.103125, -0.087500, -0.090625, -0.078125, -0.096875, -0.059375
	-0.268750, -0.234375, -0.234375, -0.209375, -0.190625, -0.168750, -0.153125, -0.153125, -0.140625, -0.121875, -0.106250, -0.115625, -0.128125, -0.109375, -0.103125, -0.087500, -0.090625, -0.103125, -0.109375, -0.071875
	-0.275000, -0.234375, -0.246875, -0.228125, -0.203125, -0.193750, -0.190625, -0.178125, -0.159375, -0.153125, -0.156250, -0.140625, -0.153125, -0.134375, -0.128125, -0.106250, -0.109375, -0.115625, -0.115625, -0.065625
	-0.287500, -0.259375, -0.259375, -0.234375, -0.203125, -0.193750, -0.190625, -0.178125, -0.165625, -0.146875, -0.143750, -0.128125, -0.140625, -0.121875, -0.115625, -0.093750, -0.103125, -0.115625, -0.115625, -0.084375
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 20
mesh_y_pps = 5
min_y = 15.0
x_count = 20
max_y = 159.97
mesh_x_pps = 5
max_x = 189.91
=======================
Extruder max_extrude_ratio=20.787584
mcu 'mcu': Starting serial connect
webhooks client 548604311296: New connection
webhooks client 548604311296: Client info {'program': 'Moonraker', 'version': 'v0.8.0-384-g8f3b30a'}
mcu 'mcu': got {'oid': 9, 'next_clock': 727024640, 'value': 31298, '#name': 'analog_in_state', '#sent_time': 299.497873062, '#receive_time': 299.507788427}
mcu 'mcu': got {'oid': 15, 'next_clock': 730864640, 'value': 31358, '#name': 'analog_in_state', '#sent_time': 299.549905198, '#receive_time': 299.568017437}
mcu 'mcu': got {'oid': 9, 'next_clock': 746224640, 'value': 31290, '#name': 'analog_in_state', '#sent_time': 299.75685025, '#receive_time': 299.807399729}
Loaded MCU 'mcu' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'pico': Starting serial connect
mcu 'mcu': got {'oid': 15, 'next_clock': 750064640, 'value': 31356, '#name': 'analog_in_state', '#sent_time': 299.815804104, '#receive_time': 299.867756864}
mcu 'mcu': got {'oid': 9, 'next_clock': 765424640, 'value': 31300, '#name': 'analog_in_state', '#sent_time': 299.815804104, '#receive_time': 300.107915771}
mcu 'mcu': got {'oid': 15, 'next_clock': 769264640, 'value': 31378, '#name': 'analog_in_state', '#sent_time': 299.815804104, '#receive_time': 300.168081031}
mcu 'mcu': got {'oid': 9, 'next_clock': 784624640, 'value': 31303, '#name': 'analog_in_state', '#sent_time': 299.815804104, '#receive_time': 300.408162177}
mcu 'mcu': got {'oid': 15, 'next_clock': 788464640, 'value': 31358, '#name': 'analog_in_state', '#sent_time': 299.815804104, '#receive_time': 300.46828952}
Loaded MCU 'pico' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'pico' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Configured MCU 'pico' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (42.0, 39.0)    | (40.0, 15.0)
  1   | (49.9, 39.0)    | (47.9, 15.0)
  2   | (57.8, 39.0)    | (55.8, 15.0)
  3   | (65.7, 39.0)    | (63.7, 15.0)
  4   | (73.6, 39.0)    | (71.6, 15.0)
  5   | (81.4, 39.0)    | (79.4, 15.0)
  6   | (89.3, 39.0)    | (87.3, 15.0)
  7   | (97.2, 39.0)    | (95.2, 15.0)
  8   | (105.1, 39.0)   | (103.1, 15.0)
  9   | (113.0, 39.0)   | (111.0, 15.0)
  10  | (120.9, 39.0)   | (118.9, 15.0)
  11  | (128.8, 39.0)   | (126.8, 15.0)
  12  | (136.7, 39.0)   | (134.7, 15.0)
  13  | (144.6, 39.0)   | (142.6, 15.0)
  14  | (152.5, 39.0)   | (150.5, 15.0)
  15  | (160.3, 39.0)   | (158.3, 15.0)
  16  | (168.2, 39.0)   | (166.2, 15.0)
  17  | (176.1, 39.0)   | (174.1, 15.0)
  18  | (184.0, 39.0)   | (182.0, 15.0)
  19  | (191.9, 39.0)   | (189.9, 15.0)
  20  | (191.9, 46.6)   | (189.9, 22.6)
  21  | (184.0, 46.6)   | (182.0, 22.6)
  22  | (176.1, 46.6)   | (174.1, 22.6)
  23  | (168.2, 46.6)   | (166.2, 22.6)
  24  | (160.3, 46.6)   | (158.3, 22.6)
  25  | (152.5, 46.6)   | (150.5, 22.6)
  26  | (144.6, 46.6)   | (142.6, 22.6)
  27  | (136.7, 46.6)   | (134.7, 22.6)
  28  | (128.8, 46.6)   | (126.8, 22.6)
  29  | (120.9, 46.6)   | (118.9, 22.6)
  30  | (113.0, 46.6)   | (111.0, 22.6)
  31  | (105.1, 46.6)   | (103.1, 22.6)
  32  | (97.2, 46.6)    | (95.2, 22.6)
  33  | (89.3, 46.6)    | (87.3, 22.6)
  34  | (81.5, 46.6)    | (79.5, 22.6)
  35  | (73.6, 46.6)    | (71.6, 22.6)
  36  | (65.7, 46.6)    | (63.7, 22.6)
  37  | (57.8, 46.6)    | (55.8, 22.6)
  38  | (49.9, 46.6)    | (47.9, 22.6)
  39  | (42.0, 46.6)    | (40.0, 22.6)
  40  | (42.0, 54.3)    | (40.0, 30.3)
  41  | (49.9, 54.3)    | (47.9, 30.3)
  42  | (57.8, 54.3)    | (55.8, 30.3)
  43  | (65.7, 54.3)    | (63.7, 30.3)
  44  | (73.6, 54.3)    | (71.6, 30.3)
  45  | (81.4, 54.3)    | (79.4, 30.3)
  46  | (89.3, 54.3)    | (87.3, 30.3)
  47  | (97.2, 54.3)    | (95.2, 30.3)
  48  | (105.1, 54.3)   | (103.1, 30.3)
  49  | (113.0, 54.3)   | (111.0, 30.3)
  50  | (120.9, 54.3)   | (118.9, 30.3)
  51  | (128.8, 54.3)   | (126.8, 30.3)
  52  | (136.7, 54.3)   | (134.7, 30.3)
  53  | (144.6, 54.3)   | (142.6, 30.3)
  54  | (152.5, 54.3)   | (150.5, 30.3)
  55  | (160.3, 54.3)   | (158.3, 30.3)
  56  | (168.2, 54.3)   | (166.2, 30.3)
  57  | (176.1, 54.3)   | (174.1, 30.3)
  58  | (184.0, 54.3)   | (182.0, 30.3)
  59  | (191.9, 54.3)   | (189.9, 30.3)
  60  | (191.9, 61.9)   | (189.9, 37.9)
  61  | (184.0, 61.9)   | (182.0, 37.9)
  62  | (176.1, 61.9)   | (174.1, 37.9)
  63  | (168.2, 61.9)   | (166.2, 37.9)
  64  | (160.3, 61.9)   | (158.3, 37.9)
  65  | (152.5, 61.9)   | (150.5, 37.9)
  66  | (144.6, 61.9)   | (142.6, 37.9)
  67  | (136.7, 61.9)   | (134.7, 37.9)
  68  | (128.8, 61.9)   | (126.8, 37.9)
  69  | (120.9, 61.9)   | (118.9, 37.9)
  70  | (113.0, 61.9)   | (111.0, 37.9)
  71  | (105.1, 61.9)   | (103.1, 37.9)
  72  | (97.2, 61.9)    | (95.2, 37.9)
  73  | (89.3, 61.9)    | (87.3, 37.9)
  74  | (81.5, 61.9)    | (79.5, 37.9)
  75  | (73.6, 61.9)    | (71.6, 37.9)
  76  | (65.7, 61.9)    | (63.7, 37.9)
  77  | (57.8, 61.9)    | (55.8, 37.9)
  78  | (49.9, 61.9)    | (47.9, 37.9)
  79  | (42.0, 61.9)    | (40.0, 37.9)
  80  | (42.0, 69.5)    | (40.0, 45.5)
  81  | (49.9, 69.5)    | (47.9, 45.5)
  82  | (57.8, 69.5)    | (55.8, 45.5)
  83  | (65.7, 69.5)    | (63.7, 45.5)
  84  | (73.6, 69.5)    | (71.6, 45.5)
  85  | (81.4, 69.5)    | (79.4, 45.5)
  86  | (89.3, 69.5)    | (87.3, 45.5)
  87  | (97.2, 69.5)    | (95.2, 45.5)
  88  | (105.1, 69.5)   | (103.1, 45.5)
  89  | (113.0, 69.5)   | (111.0, 45.5)
  90  | (120.9, 69.5)   | (118.9, 45.5)
  91  | (128.8, 69.5)   | (126.8, 45.5)
  92  | (136.7, 69.5)   | (134.7, 45.5)
  93  | (144.6, 69.5)   | (142.6, 45.5)
  94  | (152.5, 69.5)   | (150.5, 45.5)
  95  | (160.3, 69.5)   | (158.3, 45.5)
  96  | (168.2, 69.5)   | (166.2, 45.5)
  97  | (176.1, 69.5)   | (174.1, 45.5)
  98  | (184.0, 69.5)   | (182.0, 45.5)
  99  | (191.9, 69.5)   | (189.9, 45.5)
  100 | (191.9, 77.2)   | (189.9, 53.2)
  101 | (184.0, 77.2)   | (182.0, 53.2)
  102 | (176.1, 77.2)   | (174.1, 53.2)
  103 | (168.2, 77.2)   | (166.2, 53.2)
  104 | (160.3, 77.2)   | (158.3, 53.2)
  105 | (152.5, 77.2)   | (150.5, 53.2)
  106 | (144.6, 77.2)   | (142.6, 53.2)
  107 | (136.7, 77.2)   | (134.7, 53.2)
  108 | (128.8, 77.2)   | (126.8, 53.2)
  109 | (120.9, 77.2)   | (118.9, 53.2)
  110 | (113.0, 77.2)   | (111.0, 53.2)
  111 | (105.1, 77.2)   | (103.1, 53.2)
  112 | (97.2, 77.2)    | (95.2, 53.2)
  113 | (89.3, 77.2)    | (87.3, 53.2)
  114 | (81.5, 77.2)    | (79.5, 53.2)
  115 | (73.6, 77.2)    | (71.6, 53.2)
  116 | (65.7, 77.2)    | (63.7, 53.2)
  117 | (57.8, 77.2)    | (55.8, 53.2)
  118 | (49.9, 77.2)    | (47.9, 53.2)
  119 | (42.0, 77.2)    | (40.0, 53.2)
  120 | (42.0, 84.8)    | (40.0, 60.8)
  121 | (49.9, 84.8)    | (47.9, 60.8)
  122 | (57.8, 84.8)    | (55.8, 60.8)
  123 | (65.7, 84.8)    | (63.7, 60.8)
  124 | (73.6, 84.8)    | (71.6, 60.8)
  125 | (81.4, 84.8)    | (79.4, 60.8)
  126 | (89.3, 84.8)    | (87.3, 60.8)
  127 | (97.2, 84.8)    | (95.2, 60.8)
  128 | (105.1, 84.8)   | (103.1, 60.8)
  129 | (113.0, 84.8)   | (111.0, 60.8)
  130 | (120.9, 84.8)   | (118.9, 60.8)
  131 | (128.8, 84.8)   | (126.8, 60.8)
  132 | (136.7, 84.8)   | (134.7, 60.8)
  133 | (144.6, 84.8)   | (142.6, 60.8)
  134 | (152.5, 84.8)   | (150.5, 60.8)
  135 | (160.3, 84.8)   | (158.3, 60.8)
  136 | (168.2, 84.8)   | (166.2, 60.8)
  137 | (176.1, 84.8)   | (174.1, 60.8)
  138 | (184.0, 84.8)   | (182.0, 60.8)
  139 | (191.9, 84.8)   | (189.9, 60.8)
  140 | (191.9, 92.4)   | (189.9, 68.4)
  141 | (184.0, 92.4)   | (182.0, 68.4)
  142 | (176.1, 92.4)   | (174.1, 68.4)
  143 | (168.2, 92.4)   | (166.2, 68.4)
  144 | (160.3, 92.4)   | (158.3, 68.4)
  145 | (152.5, 92.4)   | (150.5, 68.4)
  146 | (144.6, 92.4)   | (142.6, 68.4)
  147 | (136.7, 92.4)   | (134.7, 68.4)
  148 | (128.8, 92.4)   | (126.8, 68.4)
  149 | (120.9, 92.4)   | (118.9, 68.4)
  150 | (113.0, 92.4)   | (111.0, 68.4)
  151 | (105.1, 92.4)   | (103.1, 68.4)
  152 | (97.2, 92.4)    | (95.2, 68.4)
  153 | (89.3, 92.4)    | (87.3, 68.4)
  154 | (81.5, 92.4)    | (79.5, 68.4)
  155 | (73.6, 92.4)    | (71.6, 68.4)
  156 | (65.7, 92.4)    | (63.7, 68.4)
  157 | (57.8, 92.4)    | (55.8, 68.4)
  158 | (49.9, 92.4)    | (47.9, 68.4)
  159 | (42.0, 92.4)    | (40.0, 68.4)
  160 | (42.0, 100.0)   | (40.0, 76.0)
  161 | (49.9, 100.0)   | (47.9, 76.0)
  162 | (57.8, 100.0)   | (55.8, 76.0)
  163 | (65.7, 100.0)   | (63.7, 76.0)
  164 | (73.6, 100.0)   | (71.6, 76.0)
  165 | (81.4, 100.0)   | (79.4, 76.0)
  166 | (89.3, 100.0)   | (87.3, 76.0)
  167 | (97.2, 100.0)   | (95.2, 76.0)
  168 | (105.1, 100.0)  | (103.1, 76.0)
  169 | (113.0, 100.0)  | (111.0, 76.0)
  170 | (120.9, 100.0)  | (118.9, 76.0)
  171 | (128.8, 100.0)  | (126.8, 76.0)
  172 | (136.7, 100.0)  | (134.7, 76.0)
  173 | (144.6, 100.0)  | (142.6, 76.0)
  174 | (152.5, 100.0)  | (150.5, 76.0)
  175 | (160.3, 100.0)  | (158.3, 76.0)
  176 | (168.2, 100.0)  | (166.2, 76.0)
  177 | (176.1, 100.0)  | (174.1, 76.0)
  178 | (184.0, 100.0)  | (182.0, 76.0)
  179 | (191.9, 100.0)  | (189.9, 76.0)
  180 | (191.9, 107.7)  | (189.9, 83.7)
  181 | (184.0, 107.7)  | (182.0, 83.7)
  182 | (176.1, 107.7)  | (174.1, 83.7)
  183 | (168.2, 107.7)  | (166.2, 83.7)
  184 | (160.3, 107.7)  | (158.3, 83.7)
  185 | (152.5, 107.7)  | (150.5, 83.7)
  186 | (144.6, 107.7)  | (142.6, 83.7)
  187 | (136.7, 107.7)  | (134.7, 83.7)
  188 | (128.8, 107.7)  | (126.8, 83.7)
  189 | (120.9, 107.7)  | (118.9, 83.7)
  190 | (113.0, 107.7)  | (111.0, 83.7)
  191 | (105.1, 107.7)  | (103.1, 83.7)
  192 | (97.2, 107.7)   | (95.2, 83.7)
  193 | (89.3, 107.7)   | (87.3, 83.7)
  194 | (81.5, 107.7)   | (79.5, 83.7)
  195 | (73.6, 107.7)   | (71.6, 83.7)
  196 | (65.7, 107.7)   | (63.7, 83.7)
  197 | (57.8, 107.7)   | (55.8, 83.7)
  198 | (49.9, 107.7)   | (47.9, 83.7)
  199 | (42.0, 107.7)   | (40.0, 83.7)
  200 | (42.0, 115.3)   | (40.0, 91.3)
  201 | (49.9, 115.3)   | (47.9, 91.3)
  202 | (57.8, 115.3)   | (55.8, 91.3)
  203 | (65.7, 115.3)   | (63.7, 91.3)
  204 | (73.6, 115.3)   | (71.6, 91.3)
  205 | (81.4, 115.3)   | (79.4, 91.3)
  206 | (89.3, 115.3)   | (87.3, 91.3)
  207 | (97.2, 115.3)   | (95.2, 91.3)
  208 | (105.1, 115.3)  | (103.1, 91.3)
  209 | (113.0, 115.3)  | (111.0, 91.3)
  210 | (120.9, 115.3)  | (118.9, 91.3)
  211 | (128.8, 115.3)  | (126.8, 91.3)
  212 | (136.7, 115.3)  | (134.7, 91.3)
  213 | (144.6, 115.3)  | (142.6, 91.3)
  214 | (152.5, 115.3)  | (150.5, 91.3)
  215 | (160.3, 115.3)  | (158.3, 91.3)
  216 | (168.2, 115.3)  | (166.2, 91.3)
  217 | (176.1, 115.3)  | (174.1, 91.3)
  218 | (184.0, 115.3)  | (182.0, 91.3)
  219 | (191.9, 115.3)  | (189.9, 91.3)
  220 | (191.9, 122.9)  | (189.9, 98.9)
  221 | (184.0, 122.9)  | (182.0, 98.9)
  222 | (176.1, 122.9)  | (174.1, 98.9)
  223 | (168.2, 122.9)  | (166.2, 98.9)
  224 | (160.3, 122.9)  | (158.3, 98.9)
  225 | (152.5, 122.9)  | (150.5, 98.9)
  226 | (144.6, 122.9)  | (142.6, 98.9)
  227 | (136.7, 122.9)  | (134.7, 98.9)
  228 | (128.8, 122.9)  | (126.8, 98.9)
  229 | (120.9, 122.9)  | (118.9, 98.9)
  230 | (113.0, 122.9)  | (111.0, 98.9)
  231 | (105.1, 122.9)  | (103.1, 98.9)
  232 | (97.2, 122.9)   | (95.2, 98.9)
  233 | (89.3, 122.9)   | (87.3, 98.9)
  234 | (81.5, 122.9)   | (79.5, 98.9)
  235 | (73.6, 122.9)   | (71.6, 98.9)
  236 | (65.7, 122.9)   | (63.7, 98.9)
  237 | (57.8, 122.9)   | (55.8, 98.9)
  238 | (49.9, 122.9)   | (47.9, 98.9)
  239 | (42.0, 122.9)   | (40.0, 98.9)
  240 | (42.0, 130.6)   | (40.0, 106.6)
  241 | (49.9, 130.6)   | (47.9, 106.6)
  242 | (57.8, 130.6)   | (55.8, 106.6)
  243 | (65.7, 130.6)   | (63.7, 106.6)
  244 | (73.6, 130.6)   | (71.6, 106.6)
  245 | (81.4, 130.6)   | (79.4, 106.6)
  246 | (89.3, 130.6)   | (87.3, 106.6)
  247 | (97.2, 130.6)   | (95.2, 106.6)
  248 | (105.1, 130.6)  | (103.1, 106.6)
  249 | (113.0, 130.6)  | (111.0, 106.6)
  250 | (120.9, 130.6)  | (118.9, 106.6)
  251 | (128.8, 130.6)  | (126.8, 106.6)
  252 | (136.7, 130.6)  | (134.7, 106.6)
  253 | (144.6, 130.6)  | (142.6, 106.6)
  254 | (152.5, 130.6)  | (150.5, 106.6)
  255 | (160.3, 130.6)  | (158.3, 106.6)
  256 | (168.2, 130.6)  | (166.2, 106.6)
  257 | (176.1, 130.6)  | (174.1, 106.6)
  258 | (184.0, 130.6)  | (182.0, 106.6)
  259 | (191.9, 130.6)  | (189.9, 106.6)
  260 | (191.9, 138.2)  | (189.9, 114.2)
  261 | (184.0, 138.2)  | (182.0, 114.2)
  262 | (176.1, 138.2)  | (174.1, 114.2)
  263 | (168.2, 138.2)  | (166.2, 114.2)
  264 | (160.3, 138.2)  | (158.3, 114.2)
  265 | (152.5, 138.2)  | (150.5, 114.2)
  266 | (144.6, 138.2)  | (142.6, 114.2)
  267 | (136.7, 138.2)  | (134.7, 114.2)
  268 | (128.8, 138.2)  | (126.8, 114.2)
  269 | (120.9, 138.2)  | (118.9, 114.2)
  270 | (113.0, 138.2)  | (111.0, 114.2)
  271 | (105.1, 138.2)  | (103.1, 114.2)
  272 | (97.2, 138.2)   | (95.2, 114.2)
  273 | (89.3, 138.2)   | (87.3, 114.2)
  274 | (81.5, 138.2)   | (79.5, 114.2)
  275 | (73.6, 138.2)   | (71.6, 114.2)
  276 | (65.7, 138.2)   | (63.7, 114.2)
  277 | (57.8, 138.2)   | (55.8, 114.2)
  278 | (49.9, 138.2)   | (47.9, 114.2)
  279 | (42.0, 138.2)   | (40.0, 114.2)
  280 | (42.0, 145.8)   | (40.0, 121.8)
  281 | (49.9, 145.8)   | (47.9, 121.8)
  282 | (57.8, 145.8)   | (55.8, 121.8)
  283 | (65.7, 145.8)   | (63.7, 121.8)
  284 | (73.6, 145.8)   | (71.6, 121.8)
  285 | (81.4, 145.8)   | (79.4, 121.8)
  286 | (89.3, 145.8)   | (87.3, 121.8)
  287 | (97.2, 145.8)   | (95.2, 121.8)
  288 | (105.1, 145.8)  | (103.1, 121.8)
  289 | (113.0, 145.8)  | (111.0, 121.8)
  290 | (120.9, 145.8)  | (118.9, 121.8)
  291 | (128.8, 145.8)  | (126.8, 121.8)
  292 | (136.7, 145.8)  | (134.7, 121.8)
  293 | (144.6, 145.8)  | (142.6, 121.8)
  294 | (152.5, 145.8)  | (150.5, 121.8)
  295 | (160.3, 145.8)  | (158.3, 121.8)
  296 | (168.2, 145.8)  | (166.2, 121.8)
  297 | (176.1, 145.8)  | (174.1, 121.8)
  298 | (184.0, 145.8)  | (182.0, 121.8)
  299 | (191.9, 145.8)  | (189.9, 121.8)
  300 | (191.9, 153.4)  | (189.9, 129.4)
  301 | (184.0, 153.4)  | (182.0, 129.4)
  302 | (176.1, 153.4)  | (174.1, 129.4)
  303 | (168.2, 153.4)  | (166.2, 129.4)
  304 | (160.3, 153.4)  | (158.3, 129.4)
  305 | (152.5, 153.4)  | (150.5, 129.4)
  306 | (144.6, 153.4)  | (142.6, 129.4)
  307 | (136.7, 153.4)  | (134.7, 129.4)
  308 | (128.8, 153.4)  | (126.8, 129.4)
  309 | (120.9, 153.4)  | (118.9, 129.4)
  310 | (113.0, 153.4)  | (111.0, 129.4)
  311 | (105.1, 153.4)  | (103.1, 129.4)
  312 | (97.2, 153.4)   | (95.2, 129.4)
  313 | (89.3, 153.4)   | (87.3, 129.4)
  314 | (81.5, 153.4)   | (79.5, 129.4)
  315 | (73.6, 153.4)   | (71.6, 129.4)
  316 | (65.7, 153.4)   | (63.7, 129.4)
  317 | (57.8, 153.4)   | (55.8, 129.4)
  318 | (49.9, 153.4)   | (47.9, 129.4)
  319 | (42.0, 153.4)   | (40.0, 129.4)
  320 | (42.0, 161.1)   | (40.0, 137.1)
  321 | (49.9, 161.1)   | (47.9, 137.1)
  322 | (57.8, 161.1)   | (55.8, 137.1)
  323 | (65.7, 161.1)   | (63.7, 137.1)
  324 | (73.6, 161.1)   | (71.6, 137.1)
  325 | (81.4, 161.1)   | (79.4, 137.1)
  326 | (89.3, 161.1)   | (87.3, 137.1)
  327 | (97.2, 161.1)   | (95.2, 137.1)
  328 | (105.1, 161.1)  | (103.1, 137.1)
  329 | (113.0, 161.1)  | (111.0, 137.1)
  330 | (120.9, 161.1)  | (118.9, 137.1)
  331 | (128.8, 161.1)  | (126.8, 137.1)
  332 | (136.7, 161.1)  | (134.7, 137.1)
  333 | (144.6, 161.1)  | (142.6, 137.1)
  334 | (152.5, 161.1)  | (150.5, 137.1)
  335 | (160.3, 161.1)  | (158.3, 137.1)
  336 | (168.2, 161.1)  | (166.2, 137.1)
  337 | (176.1, 161.1)  | (174.1, 137.1)
  338 | (184.0, 161.1)  | (182.0, 137.1)
  339 | (191.9, 161.1)  | (189.9, 137.1)
  340 | (191.9, 168.7)  | (189.9, 144.7)
  341 | (184.0, 168.7)  | (182.0, 144.7)
  342 | (176.1, 168.7)  | (174.1, 144.7)
  343 | (168.2, 168.7)  | (166.2, 144.7)
  344 | (160.3, 168.7)  | (158.3, 144.7)
  345 | (152.5, 168.7)  | (150.5, 144.7)
  346 | (144.6, 168.7)  | (142.6, 144.7)
  347 | (136.7, 168.7)  | (134.7, 144.7)
  348 | (128.8, 168.7)  | (126.8, 144.7)
  349 | (120.9, 168.7)  | (118.9, 144.7)
  350 | (113.0, 168.7)  | (111.0, 144.7)
  351 | (105.1, 168.7)  | (103.1, 144.7)
  352 | (97.2, 168.7)   | (95.2, 144.7)
  353 | (89.3, 168.7)   | (87.3, 144.7)
  354 | (81.5, 168.7)   | (79.5, 144.7)
  355 | (73.6, 168.7)   | (71.6, 144.7)
  356 | (65.7, 168.7)   | (63.7, 144.7)
  357 | (57.8, 168.7)   | (55.8, 144.7)
  358 | (49.9, 168.7)   | (47.9, 144.7)
  359 | (42.0, 168.7)   | (40.0, 144.7)
  360 | (42.0, 176.3)   | (40.0, 152.3)
  361 | (49.9, 176.3)   | (47.9, 152.3)
  362 | (57.8, 176.3)   | (55.8, 152.3)
  363 | (65.7, 176.3)   | (63.7, 152.3)
  364 | (73.6, 176.3)   | (71.6, 152.3)
  365 | (81.4, 176.3)   | (79.4, 152.3)
  366 | (89.3, 176.3)   | (87.3, 152.3)
  367 | (97.2, 176.3)   | (95.2, 152.3)
  368 | (105.1, 176.3)  | (103.1, 152.3)
  369 | (113.0, 176.3)  | (111.0, 152.3)
  370 | (120.9, 176.3)  | (118.9, 152.3)
  371 | (128.8, 176.3)  | (126.8, 152.3)
  372 | (136.7, 176.3)  | (134.7, 152.3)
  373 | (144.6, 176.3)  | (142.6, 152.3)
  374 | (152.5, 176.3)  | (150.5, 152.3)
  375 | (160.3, 176.3)  | (158.3, 152.3)
  376 | (168.2, 176.3)  | (166.2, 152.3)
  377 | (176.1, 176.3)  | (174.1, 152.3)
  378 | (184.0, 176.3)  | (182.0, 152.3)
  379 | (191.9, 176.3)  | (189.9, 152.3)
  380 | (191.9, 184.0)  | (189.9, 160.0)
  381 | (184.0, 184.0)  | (182.0, 160.0)
  382 | (176.1, 184.0)  | (174.1, 160.0)
  383 | (168.2, 184.0)  | (166.2, 160.0)
  384 | (160.3, 184.0)  | (158.3, 160.0)
  385 | (152.5, 184.0)  | (150.5, 160.0)
  386 | (144.6, 184.0)  | (142.6, 160.0)
  387 | (136.7, 184.0)  | (134.7, 160.0)
  388 | (128.8, 184.0)  | (126.8, 160.0)
  389 | (120.9, 184.0)  | (118.9, 160.0)
  390 | (113.0, 184.0)  | (111.0, 160.0)
  391 | (105.1, 184.0)  | (103.1, 160.0)
  392 | (97.2, 184.0)   | (95.2, 160.0)
  393 | (89.3, 184.0)   | (87.3, 160.0)
  394 | (81.5, 184.0)   | (79.5, 160.0)
  395 | (73.6, 184.0)   | (71.6, 160.0)
  396 | (65.7, 184.0)   | (63.7, 160.0)
  397 | (57.8, 184.0)   | (55.8, 160.0)
  398 | (49.9, 184.0)   | (47.9, 160.0)
  399 | (42.0, 184.0)   | (40.0, 160.0)
Starting heater checks for extruder
Stats 301.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1452 bytes_read=4890 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998732 pico: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2440 bytes_read=5601 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999702 adj=11999798  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=2.452 memavail=681888 print_time=128191.597 buffer_time=0.248 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548604311296
webhooks: registering remote method 'reboot_machine' for connection id: 548604311296
webhooks: registering remote method 'pause_job_queue' for connection id: 548604311296
webhooks: registering remote method 'start_job_queue' for connection id: 548604311296
Stats 302.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1458 bytes_read=5011 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998578 pico: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2446 bytes_read=5617 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999856 adj=11999976  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=2.526 memavail=681388 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 303.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000018 bytes_write=1464 bytes_read=5147 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998512 pico: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2452 bytes_read=5647 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999912 adj=12000279  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=2.560 memavail=679656 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 304.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000018 bytes_write=1470 bytes_read=5253 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998649 pico: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2458 bytes_read=5663 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000373  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=2.588 memavail=679656 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 305.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000018 bytes_write=1476 bytes_read=5374 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998767 pico: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2464 bytes_read=5679 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000011 adj=12000413  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=2.616 memavail=679656 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 306.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000018 bytes_write=1482 bytes_read=5495 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998788 pico: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2470 bytes_read=5695 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000014 adj=12000387  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.11 cputime=2.646 memavail=679656 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 307.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000018 bytes_write=1488 bytes_read=5601 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998810 pico: mcu_awake=0.008 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2476 bytes_read=5711 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000016 adj=12000348  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.11 cputime=2.676 memavail=679432 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 308.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1494 bytes_read=5736 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998830 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2482 bytes_read=5738 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000014 adj=12000312  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.11 cputime=2.706 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 309.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1500 bytes_read=5857 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998844 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2488 bytes_read=5754 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000011 adj=12000278  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.11 cputime=2.737 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 310.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1506 bytes_read=5963 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998844 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2494 bytes_read=5770 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000007 adj=12000248  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.10 cputime=2.766 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 311.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1512 bytes_read=6084 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998832 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2500 bytes_read=5786 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000006 adj=12000228  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.10 cputime=2.795 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 312.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1518 bytes_read=6205 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998880 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2506 bytes_read=5802 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000006 adj=12000231  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=2.824 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 313.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1524 bytes_read=6325 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998884 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2512 bytes_read=5829 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000006 adj=12000192  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.10 cputime=2.854 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 314.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1530 bytes_read=6446 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998865 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2518 bytes_read=5845 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000004 adj=12000196  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.10 cputime=2.885 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 315.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1536 bytes_read=6567 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998851 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2524 bytes_read=5861 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000005 adj=12000210  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.10 cputime=2.914 memavail=679224 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
DUMP_TMC stepper_x
========== Write-only registers ==========
GLOBALSCALER: 00000061 globalscaler=97
IHOLD_IRUN: 00061f1f ihold=31 irun=31 iholddelay=6
MSLUT0:     aaaab554 mslut0=2863314260
MSLUT1:     4a9554aa mslut1=1251300522
MSLUT2:     24492929 mslut2=608774441
MSLUT3:     10104222 mslut3=269500962
MSLUT4:     fbffffff mslut4=4227858431
MSLUT5:     b5bb777d mslut5=3048961917
MSLUT6:     49295556 mslut6=1227445590
MSLUT7:     00404222 mslut7=4211234
MSLUTSEL:   ffff8056 w0=2 w1=1 w2=1 w3=1 x1=128 x2=255 x3=255
MSLUTSTART: 00f70000 start_sin90=247
TPWMTHRS:   000fffff tpwmthrs=1048575
TCOOLTHRS:  00000000
THIGH:      00000000
COOLCONF:   00000000
DRV_CONF:   00000400 bbmclks=4
PWMCONF:    c40c001e pwm_ofs=30 pwm_autoscale=1 pwm_autograd=1 pwm_reg=4 pwm_lim=12
TPOWERDOWN: 0000000a tpowerdown=10
========== Queried registers ==========
GCONF:      00000008 multistep_filt=1
CHOPCONF:   345007f3 toff=3 hstrt=7 hend=15 tpfd=5 mres=4(16usteps) intpol=1 dedge=1
GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
DRV_STATUS: 801f0000 cs_actual=31 stst=1
FACTORY_CONF: 0000000d factory_conf=13
IOIN:       30000050 drv_enn=1 sd_mode=1 version=0x30
LOST_STEPS: 00000000
MSCNT:      00000008 mscnt=8
MSCURACT:   00f7000c cur_a=12 cur_b=247
OTP_READ:   0000000d otp_fclktrim=13
PWM_SCALE:  0000001d pwm_scale_sum=29
PWM_AUTO:   0000001d pwm_ofs_auto=29
TSTEP:      000fffff tstep=1048575
Stats 316.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1542 bytes_read=6673 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998815 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2868 bytes_read=6176 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000001 adj=12000229  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.10 cputime=3.049 memavail=679240 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 317.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1548 bytes_read=6809 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998775 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2874 bytes_read=6192 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999994 adj=12000241  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.10 cputime=3.067 memavail=679240 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 318.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1554 bytes_read=6915 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998751 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2880 bytes_read=6222 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999989 adj=12000228  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=3.084 memavail=678744 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 319.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1560 bytes_read=7035 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998732 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2886 bytes_read=6238 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999985 adj=12000225  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.10 cputime=3.101 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 320.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1566 bytes_read=7171 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998715 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2892 bytes_read=6254 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999984 adj=12000222  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.09 cputime=3.118 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 321.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1572 bytes_read=7277 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998723 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2898 bytes_read=6270 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000238  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.09 cputime=3.141 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 322.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1578 bytes_read=7383 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998733 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2904 bytes_read=6286 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000204  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.09 cputime=3.170 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 323.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1584 bytes_read=7519 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998733 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2910 bytes_read=6313 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999983 adj=12000203  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.09 cputime=3.201 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 324.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1590 bytes_read=7639 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998730 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2916 bytes_read=6329 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000213  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.09 cputime=3.230 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 325.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1596 bytes_read=7745 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998732 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2922 bytes_read=6345 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000213  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=3.261 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 326.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1602 bytes_read=7881 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998729 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2928 bytes_read=6361 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000211  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.16 cputime=3.291 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 327.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1608 bytes_read=7987 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998740 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2934 bytes_read=6377 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000217  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.16 cputime=3.321 memavail=678748 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 328.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1614 bytes_read=8093 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998738 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2940 bytes_read=6404 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000203  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.16 cputime=3.350 memavail=678768 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 329.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1620 bytes_read=8243 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998733 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2946 bytes_read=6420 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000207  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.16 cputime=3.381 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 330.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1626 bytes_read=8349 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998732 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2952 bytes_read=6436 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000215  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.15 cputime=3.408 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 331.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1632 bytes_read=8455 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998724 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2958 bytes_read=6452 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000224  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.15 cputime=3.436 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 332.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1638 bytes_read=8591 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2964 bytes_read=6468 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000233  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.15 cputime=3.466 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 333.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1644 bytes_read=8697 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2970 bytes_read=6495 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000239  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.15 cputime=3.494 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 334.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1650 bytes_read=8817 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998715 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2976 bytes_read=6511 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000236  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.15 cputime=3.523 memavail=678772 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 335.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1656 bytes_read=8953 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998719 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2982 bytes_read=6527 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000238  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.14 cputime=3.553 memavail=678780 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 336.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1662 bytes_read=9059 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2988 bytes_read=6543 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999982 adj=12000230  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.14 cputime=3.582 memavail=678780 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 337.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1668 bytes_read=9165 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2994 bytes_read=6559 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000226  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.14 cputime=3.611 memavail=678780 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 338.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1674 bytes_read=9301 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998718 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3000 bytes_read=6586 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000220  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.14 cputime=3.640 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 339.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1680 bytes_read=9421 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998714 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3006 bytes_read=6602 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000217  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.14 cputime=3.668 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 340.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1686 bytes_read=9527 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998712 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3012 bytes_read=6618 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=3.697 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 341.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1692 bytes_read=9663 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998710 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3018 bytes_read=6634 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000221  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.12 cputime=3.728 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 342.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1698 bytes_read=9769 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998708 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3024 bytes_read=6650 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000223  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=3.756 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 343.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1704 bytes_read=9875 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998710 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3036 bytes_read=6693 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000226  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.12 cputime=3.786 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 344.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1710 bytes_read=10025 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998708 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3042 bytes_read=6709 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000216  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=3.817 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 345.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1716 bytes_read=10131 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998707 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3048 bytes_read=6725 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000221  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.11 cputime=3.846 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 346.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1722 bytes_read=10237 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998704 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3054 bytes_read=6741 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000224  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.11 cputime=3.874 memavail=678792 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 347.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1728 bytes_read=10373 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998705 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3060 bytes_read=6757 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000230  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=3.905 memavail=678804 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 348.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1734 bytes_read=10479 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998703 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3066 bytes_read=6784 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000231  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.11 cputime=3.933 memavail=678316 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 349.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1740 bytes_read=10599 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998709 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3072 bytes_read=6800 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000225  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=3.962 memavail=678316 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 350.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1746 bytes_read=10735 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998711 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3078 bytes_read=6816 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000230  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=3.992 memavail=678316 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 351.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1752 bytes_read=10841 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998711 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3084 bytes_read=6832 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000225  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.10 cputime=4.021 memavail=678316 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 352.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1758 bytes_read=10947 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998712 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3090 bytes_read=6848 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000222  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=4.050 memavail=678320 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 353.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1764 bytes_read=11083 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998710 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3096 bytes_read=6875 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000228  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=4.081 memavail=678320 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 354.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1770 bytes_read=11199 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998710 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3102 bytes_read=6891 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000230  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=4.111 memavail=678320 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 355.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1776 bytes_read=11298 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998708 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3108 bytes_read=6907 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000224  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=4.139 memavail=678320 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 356.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1782 bytes_read=11425 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998704 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3114 bytes_read=6922 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=4.169 memavail=678320 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 357.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1788 bytes_read=11524 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998701 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3120 bytes_read=6937 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000225  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.10 cputime=4.200 memavail=678324 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 358.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1794 bytes_read=11625 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998698 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3126 bytes_read=6963 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000225  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.10 cputime=4.228 memavail=678096 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 359.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000009 bytes_write=1800 bytes_read=11775 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998695 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3132 bytes_read=6978 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000228  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.10 cputime=4.257 memavail=678096 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 360.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000009 bytes_write=1806 bytes_read=11881 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998693 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3138 bytes_read=6993 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000231  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.09 cputime=4.286 memavail=678096 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 361.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000009 bytes_write=1818 bytes_read=11987 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=208 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998691 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3144 bytes_read=7007 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999978 adj=12000234  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.09 cputime=4.314 memavail=678096 print_time=128191.597 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-l', '/home/pi/printer_data/logs/klippy.log', '-I', '/home/pi/printer_data/comms/klippy.serial', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-263-g0087f04c-dirty'
Modified files: klippy/extras/tmc5160.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper.git
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Jul 14 04:40:35 2024 (1720950035.2 556.2)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro PRINT_START]
gcode = 
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(190)|float %}
	
	M140 S{BED_TEMP}
	
	G90
	
	SET_GCODE_OFFSET Z=0.0
	
	G28
	G0 X5
	
	M190 S{BED_TEMP}
	
	M109 S{EXTRUDER_TEMP}
	M83
	BED_MESH_PROFILE load=default
	G92 E0
	G1 Z2.0 F3000
	G1 X18 Y10 Z0.3 F5000.0
	G1 X18 Y10 Z0.3 F1500.0 E30
	G1 X18.4 Y185.0 Z0.3 F5000.0
	G1 X18.4 Y10 Z0.3 F1500.0 E30
	G1 X18.8 Y185.0 Z0.3 F5000.0
	G1 X18.8 Y10 Z0.3 F1500.0 E30
	G92 E0
	G1 Z2.0 F3000
	G1 X5 Y20 Z0.3 F5000.0

[gcode_macro speed_settings]
gcode = 
	SET_RETRACTION RECTRACT_LENGTH=0;
	SET_PRESSURE_ADVANCE ADVANCE=0;

[gcode_macro benchy_test_start]
gcode = 
	speed_settings
	BED_MESH_PROFILE load=default
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION

[gcode_macro benchy_test_end]
gcode = 
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro end_print]
gcode = 
	G91
	G1 E-2 F2700
	G1 E-2 Z0.2 F2400
	G1 X5 Y5 F3000
	G1 Z10
	G90
	G1 X0 Y180
	M104 S0
	M140 S0
	M84 X Y E

[gcode_macro G29]
gcode = 
	M140 S70
	M190 S70
	BED_MESH_CLEAR
	BED_MESH_CALIBRATE METHOD=AUTOMATIC
	BED_MESH_PROFILE LOAD=default
	SAVE_CONFIG

[filament_switch_sensor filament_runout_sensor]
switch_pin = PC15
runout_gcode = 
	hold_hotend_temp
	M104 S0
	
	PAUSE
insert_gcode = 
	
	M104 S{hotend_temp}
	G4 P10000
	G1 E20 F400

[gcode_macro hold_hotend_temp]
variable_hotend_temp = 0
gcode = 
	
	SET_GCODE_VARIABLE MACRO=hold_hotend_temp VARIABLE=hotend_temp VALUE={printer.extruder.temperature}

[printer]
kinematics = corexz
max_velocity = 2822.0
max_z_velocity = 2448
max_accel = 27945
max_z_accel = 20400
square_corner_velocity = 15

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3C002D001450415833323520-if00
restart_method = command

[mcu pico]
serial = /dev/serial/by-id/usb-Klipper_rp2040_454741505C0BD4AA-if00

[stepper_x]
step_pin = pico: gpio4
dir_pin = pico: gpio1
enable_pin = !pico: gpio5
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 220
position_min = 0
homing_speed = 75
second_homing_speed = 20

[tmc5160 stepper_x]
cs_pin = pico: gpio6
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[stepper_y]
step_pin = pico: gpio9
dir_pin = pico: gpio8
enable_pin = !pico: gpio10
microsteps = 128
rotation_distance = 120
endstop_pin = ^PC1
position_endstop = 0
position_max = 190
position_min = 0
homing_speed = 75
second_homing_speed = 10
homing_retract_dist = 10.0

[tmc5160 stepper_y]
cs_pin = pico: gpio11
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 5
hold_current = 2.5
sense_resistor = 0.022
interpolate = true
driver_tbl = 3
driver_toff = 3
driver_hstrt = 2
driver_hend = 3
driver_tpfd = 10
driver_chm = 0

[stepper_z]
step_pin = pico: gpio14
dir_pin = !pico: gpio13
enable_pin = !pico: gpio15
microsteps = 16
rotation_distance = 40
endstop_pin = probe:z_virtual_endstop
position_min = -5
position_max = 250

[tmc5160 stepper_z]
cs_pin = pico: gpio17
spi_software_sclk_pin = pico: gpio2
spi_software_mosi_pin = pico: gpio0
spi_software_miso_pin = pico: gpio3
run_current = 3.960
hold_current = 3.960
sense_resistor = 0.022
interpolate = true
driver_tbl = 0
driver_toff = 3
driver_hstrt = 7
driver_hend = 15
driver_tpfd = 5
driver_chm = 0

[thermistor Trianglelab NTC100K B3950]
temperature1 = 25.0
resistance1 = 103180.0
temperature2 = 150.0
resistance2 = 1366.2
temperature3 = 250.0
resistance3 = 168.6

[multi_pin multi_heater]
pins = PC8, pico:gpio28, pico:gpio26, pico:gpio25

[extruder]
control = watermark
filament_diameter = 1.75
max_extrude_cross_section = 50.0
max_extrude_only_distance = 500.0
max_extrude_only_velocity = 120
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 16
rotation_distance = 4.637
nozzle_diameter = 0.500
heater_pin = multi_pin:multi_heater
sensor_type = Trianglelab NTC100K B3950
sensor_pin = PA0
min_temp = 0
max_temp = 300
pressure_advance = 0.02
pressure_advance_smooth_time = 0.01
min_extrude_temp = 0
pid_kp = 12.147
pid_ki = 0.789
pid_kd = 46.764
block_heat_capacity = 42.3195
sensor_responsiveness = 0.103970
ambient_transfer = 0.203696
fan_ambient_transfer = 0.203696, 0.274226, 0.369183

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
uart_address = 3
run_current = 0.85
hold_current = 0.400
interpolate = true
driver_tbl = 0
driver_hend = 6
driver_hstrt = 7
driver_toff = 4

[heater_bed]
control = watermark
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 130

[controller_fan electronics_fan]
pin = PC7

[heater_fan hot_end_fan]
pin = PB15
heater = extruder
heater_temp = 30.0

[fan]
pin = PC6
kick_start_time = 0.100
off_below = 0.5

[bltouch]
sensor_pin = ^PC14
control_pin = PA1
pin_up_touch_mode_reports_triggered = True
probe_with_touch_mode = True
x_offset = -2
y_offset = -24
sample_retract_dist = 6.0
lift_speed = 100
samples_tolerance_retries = 3
speed = 30
samples = 2
z_offset = 2.330

[safe_z_home]
home_xy_position = 110, 125
speed = 300
z_hop = 10
z_hop_speed = 100

[bed_mesh]
speed = 300
horizontal_move_z = 6
mesh_min = 40, 15
mesh_max = 190, 160
probe_count = 20,20
mesh_pps = 5, 5
algorithm = bicubic
bicubic_tension = 0.2

[screws_tilt_adjust]
horizontal_move_z = 5
screw1 = 60,192
screw1_name = back left
screw2 = 230,192
screw2_name = back right
screw3 = 60,22
screw3_name = front left
screw4 = 230,22
screw4_name = front right

[firmware_retraction]
retract_length = 1.2
retract_speed = 120
unretract_speed = 120

[idle_timeout]
timeout = 1000
gcode = 
	{% if printer.pause_resume.is_paused %}
	M104 S0
	M117 "Timeout ignored because printer state == paused."
	{% else %}
	M18
	M104 S0
	M140 S0
	M117
	{% endif %}

[exclude_object]

[gcode_macro M486]
gcode = 
	
	
	
	
	
	
	
	
	
	
	
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[bed_mesh default]
version = 1
points = 
	-0.250000, -0.178125, -0.221875, -0.196875, -0.146875, -0.150000, -0.153125, -0.153125, -0.140625, -0.128125, -0.131250, -0.121875, -0.134375, -0.115625, -0.103125, -0.100000, -0.115625, -0.121875, -0.096875, -0.053125
	-0.237500, -0.171875, -0.190625, -0.190625, -0.140625, -0.137500, -0.128125, -0.134375, -0.121875, -0.103125, -0.100000, -0.096875, -0.109375, -0.096875, -0.090625, -0.075000, -0.090625, -0.103125, -0.103125, -0.065625
	-0.225000, -0.190625, -0.103125, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.096875, -0.093750, -0.090625, -0.096875, -0.078125, -0.065625, -0.056250, -0.071875, -0.065625, -0.059375, -0.028125
	-0.231250, -0.196875, -0.184375, -0.178125, -0.140625, -0.112500, -0.109375, -0.109375, -0.109375, -0.090625, -0.062500, -0.078125, -0.078125, -0.059375, -0.053125, -0.043750, -0.046875, -0.059375, -0.065625, -0.015625
	-0.225000, -0.196875, -0.184375, -0.178125, -0.140625, -0.131250, -0.121875, -0.121875, -0.103125, -0.090625, -0.081250, -0.078125, -0.078125, -0.065625, -0.053125, -0.018750, -0.021875, -0.034375, -0.040625, -0.003125
	-0.218750, -0.196875, -0.171875, -0.171875, -0.121875, -0.100000, -0.096875, -0.096875, -0.096875, -0.053125, -0.062500, -0.059375, -0.059375, -0.059375, -0.046875, -0.031250, -0.028125, -0.009375, -0.046875, -0.003125
	-0.212500, -0.184375, -0.178125, -0.165625, -0.134375, -0.125000, -0.103125, -0.103125, -0.034375, -0.090625, -0.075000, -0.078125, -0.078125, -0.065625, -0.046875, -0.043750, -0.015625, -0.034375, -0.040625, -0.003125
	-0.206250, -0.171875, -0.153125, -0.165625, -0.121875, -0.106250, -0.096875, -0.096875, -0.096875, -0.078125, -0.068750, -0.065625, -0.059375, -0.059375, -0.040625, -0.031250, 0.009375, -0.034375, -0.040625, 0.003125
	-0.206250, -0.090625, -0.159375, -0.165625, -0.121875, -0.100000, -0.090625, -0.103125, -0.103125, -0.090625, -0.081250, -0.078125, -0.084375, -0.065625, -0.046875, -0.037500, -0.046875, -0.046875, -0.028125, -0.003125
	-0.206250, -0.184375, -0.146875, -0.171875, -0.128125, -0.118750, -0.096875, -0.096875, -0.109375, -0.096875, -0.081250, -0.078125, -0.084375, -0.065625, -0.053125, -0.037500, -0.053125, -0.046875, -0.059375, -0.015625
	-0.200000, -0.178125, -0.171875, -0.190625, -0.153125, -0.118750, -0.103125, -0.128125, -0.115625, -0.096875, -0.093750, -0.084375, -0.084375, -0.065625, -0.053125, -0.043750, -0.046875, -0.059375, -0.059375, -0.015625
	-0.218750, -0.190625, -0.190625, -0.184375, -0.153125, -0.106250, -0.109375, -0.121875, -0.121875, -0.090625, -0.075000, -0.078125, -0.071875, -0.071875, -0.053125, -0.043750, -0.059375, -0.040625, -0.065625, -0.034375
	-0.218750, -0.196875, -0.203125, -0.190625, -0.153125, -0.143750, -0.134375, -0.140625, -0.115625, -0.096875, -0.081250, -0.090625, -0.103125, -0.090625, -0.065625, -0.068750, -0.065625, -0.065625, -0.071875, -0.028125
	-0.225000, -0.196875, -0.184375, -0.184375, -0.153125, -0.131250, -0.109375, -0.134375, -0.128125, -0.096875, -0.100000, -0.090625, -0.096875, -0.084375, -0.065625, -0.056250, -0.065625, -0.078125, -0.065625, -0.046875
	-0.237500, -0.203125, -0.196875, -0.196875, -0.165625, -0.162500, -0.140625, -0.134375, -0.140625, -0.115625, -0.106250, -0.096875, -0.115625, -0.096875, -0.065625, -0.056250, -0.065625, -0.065625, -0.071875, -0.021875
	-0.231250, -0.196875, -0.221875, -0.196875, -0.203125, -0.175000, -0.153125, -0.146875, -0.121875, -0.109375, -0.100000, -0.096875, -0.096875, -0.084375, -0.078125, -0.056250, -0.071875, -0.084375, -0.084375, -0.046875
	-0.243750, -0.209375, -0.228125, -0.215625, -0.190625, -0.181250, -0.165625, -0.153125, -0.140625, -0.128125, -0.131250, -0.109375, -0.115625, -0.115625, -0.103125, -0.087500, -0.090625, -0.078125, -0.096875, -0.059375
	-0.268750, -0.234375, -0.234375, -0.209375, -0.190625, -0.168750, -0.153125, -0.153125, -0.140625, -0.121875, -0.106250, -0.115625, -0.128125, -0.109375, -0.103125, -0.087500, -0.090625, -0.103125, -0.109375, -0.071875
	-0.275000, -0.234375, -0.246875, -0.228125, -0.203125, -0.193750, -0.190625, -0.178125, -0.159375, -0.153125, -0.156250, -0.140625, -0.153125, -0.134375, -0.128125, -0.106250, -0.109375, -0.115625, -0.115625, -0.065625
	-0.287500, -0.259375, -0.259375, -0.234375, -0.203125, -0.193750, -0.190625, -0.178125, -0.165625, -0.146875, -0.143750, -0.128125, -0.140625, -0.121875, -0.115625, -0.093750, -0.103125, -0.115625, -0.115625, -0.084375
tension = 0.2
min_x = 40.0
algo = bicubic
y_count = 20
mesh_y_pps = 5
min_y = 15.0
x_count = 20
max_y = 159.97
mesh_x_pps = 5
max_x = 189.91
=======================
Extruder max_extrude_ratio=20.787584
mcu 'mcu': Starting serial connect
webhooks client 548530659280: New connection
webhooks client 548530659280: Client info {'program': 'Moonraker', 'version': 'v0.8.0-384-g8f3b30a'}
mcu 'mcu': got {'oid': 9, 'next_clock': 59155456, 'value': 31294, '#name': 'analog_in_state', '#sent_time': 557.462584735, '#receive_time': 557.513779683}
mcu 'mcu': got {'oid': 15, 'next_clock': 62995456, 'value': 31344, '#name': 'analog_in_state', '#sent_time': 557.568062547, '#receive_time': 557.572902547}
mcu 'mcu': got {'oid': 9, 'next_clock': 78355456, 'value': 31287, '#name': 'analog_in_state', '#sent_time': 557.776728016, '#receive_time': 557.813526193}
mcu 'mcu': got {'oid': 15, 'next_clock': 82195456, 'value': 31373, '#name': 'analog_in_state', '#sent_time': 557.828149526, '#receive_time': 557.87379062}
Loaded MCU 'mcu' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'pico': Starting serial connect
mcu 'mcu': got {'oid': 9, 'next_clock': 97555456, 'value': 31281, '#name': 'analog_in_state', '#sent_time': 557.885672495, '#receive_time': 558.112909891}
mcu 'mcu': got {'oid': 15, 'next_clock': 101395456, 'value': 31356, '#name': 'analog_in_state', '#sent_time': 557.885672495, '#receive_time': 558.173037026}
mcu 'mcu': got {'oid': 9, 'next_clock': 116755456, 'value': 31295, '#name': 'analog_in_state', '#sent_time': 557.885672495, '#receive_time': 558.41318088}
mcu 'mcu': got {'oid': 15, 'next_clock': 120595456, 'value': 31378, '#name': 'analog_in_state', '#sent_time': 557.885672495, '#receive_time': 558.473341505}
Loaded MCU 'pico' 112 commands (v0.12.0-143-ge6fd7e0d / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'pico' config: ADC_MAX=4095 BUS_PINS_i2c0a=gpio0,gpio1 BUS_PINS_i2c0b=gpio4,gpio5 BUS_PINS_i2c0c=gpio8,gpio9 BUS_PINS_i2c0d=gpio12,gpio13 BUS_PINS_i2c0e=gpio16,gpio17 BUS_PINS_i2c0f=gpio20,gpio21 BUS_PINS_i2c0g=gpio24,gpio25 BUS_PINS_i2c0h=gpio28,gpio29 BUS_PINS_i2c1a=gpio2,gpio3 BUS_PINS_i2c1b=gpio6,gpio7 BUS_PINS_i2c1c=gpio10,gpio11 BUS_PINS_i2c1d=gpio14,gpio15 BUS_PINS_i2c1e=gpio18,gpio19 BUS_PINS_i2c1f=gpio22,gpio23 BUS_PINS_i2c1g=gpio26,gpio27 BUS_PINS_spi0a=gpio0,gpio3,gpio2 BUS_PINS_spi0b=gpio4,gpio7,gpio6 BUS_PINS_spi0c=gpio16,gpio19,gpio18 BUS_PINS_spi0d=gpio20,gpio23,gpio22 BUS_PINS_spi1a=gpio8,gpio11,gpio10 BUS_PINS_spi1b=gpio12,gpio15,gpio14 BUS_PINS_spi1c=gpio24,gpio27,gpio26 CLOCK_FREQ=12000000 MCU=rp2040 PWM_MAX=255 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Configured MCU 'pico' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (42.0, 39.0)    | (40.0, 15.0)
  1   | (49.9, 39.0)    | (47.9, 15.0)
  2   | (57.8, 39.0)    | (55.8, 15.0)
  3   | (65.7, 39.0)    | (63.7, 15.0)
  4   | (73.6, 39.0)    | (71.6, 15.0)
  5   | (81.4, 39.0)    | (79.4, 15.0)
  6   | (89.3, 39.0)    | (87.3, 15.0)
  7   | (97.2, 39.0)    | (95.2, 15.0)
  8   | (105.1, 39.0)   | (103.1, 15.0)
  9   | (113.0, 39.0)   | (111.0, 15.0)
  10  | (120.9, 39.0)   | (118.9, 15.0)
  11  | (128.8, 39.0)   | (126.8, 15.0)
  12  | (136.7, 39.0)   | (134.7, 15.0)
  13  | (144.6, 39.0)   | (142.6, 15.0)
  14  | (152.5, 39.0)   | (150.5, 15.0)
  15  | (160.3, 39.0)   | (158.3, 15.0)
  16  | (168.2, 39.0)   | (166.2, 15.0)
  17  | (176.1, 39.0)   | (174.1, 15.0)
  18  | (184.0, 39.0)   | (182.0, 15.0)
  19  | (191.9, 39.0)   | (189.9, 15.0)
  20  | (191.9, 46.6)   | (189.9, 22.6)
  21  | (184.0, 46.6)   | (182.0, 22.6)
  22  | (176.1, 46.6)   | (174.1, 22.6)
  23  | (168.2, 46.6)   | (166.2, 22.6)
  24  | (160.3, 46.6)   | (158.3, 22.6)
  25  | (152.5, 46.6)   | (150.5, 22.6)
  26  | (144.6, 46.6)   | (142.6, 22.6)
  27  | (136.7, 46.6)   | (134.7, 22.6)
  28  | (128.8, 46.6)   | (126.8, 22.6)
  29  | (120.9, 46.6)   | (118.9, 22.6)
  30  | (113.0, 46.6)   | (111.0, 22.6)
  31  | (105.1, 46.6)   | (103.1, 22.6)
  32  | (97.2, 46.6)    | (95.2, 22.6)
  33  | (89.3, 46.6)    | (87.3, 22.6)
  34  | (81.5, 46.6)    | (79.5, 22.6)
  35  | (73.6, 46.6)    | (71.6, 22.6)
  36  | (65.7, 46.6)    | (63.7, 22.6)
  37  | (57.8, 46.6)    | (55.8, 22.6)
  38  | (49.9, 46.6)    | (47.9, 22.6)
  39  | (42.0, 46.6)    | (40.0, 22.6)
  40  | (42.0, 54.3)    | (40.0, 30.3)
  41  | (49.9, 54.3)    | (47.9, 30.3)
  42  | (57.8, 54.3)    | (55.8, 30.3)
  43  | (65.7, 54.3)    | (63.7, 30.3)
  44  | (73.6, 54.3)    | (71.6, 30.3)
  45  | (81.4, 54.3)    | (79.4, 30.3)
  46  | (89.3, 54.3)    | (87.3, 30.3)
  47  | (97.2, 54.3)    | (95.2, 30.3)
  48  | (105.1, 54.3)   | (103.1, 30.3)
  49  | (113.0, 54.3)   | (111.0, 30.3)
  50  | (120.9, 54.3)   | (118.9, 30.3)
  51  | (128.8, 54.3)   | (126.8, 30.3)
  52  | (136.7, 54.3)   | (134.7, 30.3)
  53  | (144.6, 54.3)   | (142.6, 30.3)
  54  | (152.5, 54.3)   | (150.5, 30.3)
  55  | (160.3, 54.3)   | (158.3, 30.3)
  56  | (168.2, 54.3)   | (166.2, 30.3)
  57  | (176.1, 54.3)   | (174.1, 30.3)
  58  | (184.0, 54.3)   | (182.0, 30.3)
  59  | (191.9, 54.3)   | (189.9, 30.3)
  60  | (191.9, 61.9)   | (189.9, 37.9)
  61  | (184.0, 61.9)   | (182.0, 37.9)
  62  | (176.1, 61.9)   | (174.1, 37.9)
  63  | (168.2, 61.9)   | (166.2, 37.9)
  64  | (160.3, 61.9)   | (158.3, 37.9)
  65  | (152.5, 61.9)   | (150.5, 37.9)
  66  | (144.6, 61.9)   | (142.6, 37.9)
  67  | (136.7, 61.9)   | (134.7, 37.9)
  68  | (128.8, 61.9)   | (126.8, 37.9)
  69  | (120.9, 61.9)   | (118.9, 37.9)
  70  | (113.0, 61.9)   | (111.0, 37.9)
  71  | (105.1, 61.9)   | (103.1, 37.9)
  72  | (97.2, 61.9)    | (95.2, 37.9)
  73  | (89.3, 61.9)    | (87.3, 37.9)
  74  | (81.5, 61.9)    | (79.5, 37.9)
  75  | (73.6, 61.9)    | (71.6, 37.9)
  76  | (65.7, 61.9)    | (63.7, 37.9)
  77  | (57.8, 61.9)    | (55.8, 37.9)
  78  | (49.9, 61.9)    | (47.9, 37.9)
  79  | (42.0, 61.9)    | (40.0, 37.9)
  80  | (42.0, 69.5)    | (40.0, 45.5)
  81  | (49.9, 69.5)    | (47.9, 45.5)
  82  | (57.8, 69.5)    | (55.8, 45.5)
  83  | (65.7, 69.5)    | (63.7, 45.5)
  84  | (73.6, 69.5)    | (71.6, 45.5)
  85  | (81.4, 69.5)    | (79.4, 45.5)
  86  | (89.3, 69.5)    | (87.3, 45.5)
  87  | (97.2, 69.5)    | (95.2, 45.5)
  88  | (105.1, 69.5)   | (103.1, 45.5)
  89  | (113.0, 69.5)   | (111.0, 45.5)
  90  | (120.9, 69.5)   | (118.9, 45.5)
  91  | (128.8, 69.5)   | (126.8, 45.5)
  92  | (136.7, 69.5)   | (134.7, 45.5)
  93  | (144.6, 69.5)   | (142.6, 45.5)
  94  | (152.5, 69.5)   | (150.5, 45.5)
  95  | (160.3, 69.5)   | (158.3, 45.5)
  96  | (168.2, 69.5)   | (166.2, 45.5)
  97  | (176.1, 69.5)   | (174.1, 45.5)
  98  | (184.0, 69.5)   | (182.0, 45.5)
  99  | (191.9, 69.5)   | (189.9, 45.5)
  100 | (191.9, 77.2)   | (189.9, 53.2)
  101 | (184.0, 77.2)   | (182.0, 53.2)
  102 | (176.1, 77.2)   | (174.1, 53.2)
  103 | (168.2, 77.2)   | (166.2, 53.2)
  104 | (160.3, 77.2)   | (158.3, 53.2)
  105 | (152.5, 77.2)   | (150.5, 53.2)
  106 | (144.6, 77.2)   | (142.6, 53.2)
  107 | (136.7, 77.2)   | (134.7, 53.2)
  108 | (128.8, 77.2)   | (126.8, 53.2)
  109 | (120.9, 77.2)   | (118.9, 53.2)
  110 | (113.0, 77.2)   | (111.0, 53.2)
  111 | (105.1, 77.2)   | (103.1, 53.2)
  112 | (97.2, 77.2)    | (95.2, 53.2)
  113 | (89.3, 77.2)    | (87.3, 53.2)
  114 | (81.5, 77.2)    | (79.5, 53.2)
  115 | (73.6, 77.2)    | (71.6, 53.2)
  116 | (65.7, 77.2)    | (63.7, 53.2)
  117 | (57.8, 77.2)    | (55.8, 53.2)
  118 | (49.9, 77.2)    | (47.9, 53.2)
  119 | (42.0, 77.2)    | (40.0, 53.2)
  120 | (42.0, 84.8)    | (40.0, 60.8)
  121 | (49.9, 84.8)    | (47.9, 60.8)
  122 | (57.8, 84.8)    | (55.8, 60.8)
  123 | (65.7, 84.8)    | (63.7, 60.8)
  124 | (73.6, 84.8)    | (71.6, 60.8)
  125 | (81.4, 84.8)    | (79.4, 60.8)
  126 | (89.3, 84.8)    | (87.3, 60.8)
  127 | (97.2, 84.8)    | (95.2, 60.8)
  128 | (105.1, 84.8)   | (103.1, 60.8)
  129 | (113.0, 84.8)   | (111.0, 60.8)
  130 | (120.9, 84.8)   | (118.9, 60.8)
  131 | (128.8, 84.8)   | (126.8, 60.8)
  132 | (136.7, 84.8)   | (134.7, 60.8)
  133 | (144.6, 84.8)   | (142.6, 60.8)
  134 | (152.5, 84.8)   | (150.5, 60.8)
  135 | (160.3, 84.8)   | (158.3, 60.8)
  136 | (168.2, 84.8)   | (166.2, 60.8)
  137 | (176.1, 84.8)   | (174.1, 60.8)
  138 | (184.0, 84.8)   | (182.0, 60.8)
  139 | (191.9, 84.8)   | (189.9, 60.8)
  140 | (191.9, 92.4)   | (189.9, 68.4)
  141 | (184.0, 92.4)   | (182.0, 68.4)
  142 | (176.1, 92.4)   | (174.1, 68.4)
  143 | (168.2, 92.4)   | (166.2, 68.4)
  144 | (160.3, 92.4)   | (158.3, 68.4)
  145 | (152.5, 92.4)   | (150.5, 68.4)
  146 | (144.6, 92.4)   | (142.6, 68.4)
  147 | (136.7, 92.4)   | (134.7, 68.4)
  148 | (128.8, 92.4)   | (126.8, 68.4)
  149 | (120.9, 92.4)   | (118.9, 68.4)
  150 | (113.0, 92.4)   | (111.0, 68.4)
  151 | (105.1, 92.4)   | (103.1, 68.4)
  152 | (97.2, 92.4)    | (95.2, 68.4)
  153 | (89.3, 92.4)    | (87.3, 68.4)
  154 | (81.5, 92.4)    | (79.5, 68.4)
  155 | (73.6, 92.4)    | (71.6, 68.4)
  156 | (65.7, 92.4)    | (63.7, 68.4)
  157 | (57.8, 92.4)    | (55.8, 68.4)
  158 | (49.9, 92.4)    | (47.9, 68.4)
  159 | (42.0, 92.4)    | (40.0, 68.4)
  160 | (42.0, 100.0)   | (40.0, 76.0)
  161 | (49.9, 100.0)   | (47.9, 76.0)
  162 | (57.8, 100.0)   | (55.8, 76.0)
  163 | (65.7, 100.0)   | (63.7, 76.0)
  164 | (73.6, 100.0)   | (71.6, 76.0)
  165 | (81.4, 100.0)   | (79.4, 76.0)
  166 | (89.3, 100.0)   | (87.3, 76.0)
  167 | (97.2, 100.0)   | (95.2, 76.0)
  168 | (105.1, 100.0)  | (103.1, 76.0)
  169 | (113.0, 100.0)  | (111.0, 76.0)
  170 | (120.9, 100.0)  | (118.9, 76.0)
  171 | (128.8, 100.0)  | (126.8, 76.0)
  172 | (136.7, 100.0)  | (134.7, 76.0)
  173 | (144.6, 100.0)  | (142.6, 76.0)
  174 | (152.5, 100.0)  | (150.5, 76.0)
  175 | (160.3, 100.0)  | (158.3, 76.0)
  176 | (168.2, 100.0)  | (166.2, 76.0)
  177 | (176.1, 100.0)  | (174.1, 76.0)
  178 | (184.0, 100.0)  | (182.0, 76.0)
  179 | (191.9, 100.0)  | (189.9, 76.0)
  180 | (191.9, 107.7)  | (189.9, 83.7)
  181 | (184.0, 107.7)  | (182.0, 83.7)
  182 | (176.1, 107.7)  | (174.1, 83.7)
  183 | (168.2, 107.7)  | (166.2, 83.7)
  184 | (160.3, 107.7)  | (158.3, 83.7)
  185 | (152.5, 107.7)  | (150.5, 83.7)
  186 | (144.6, 107.7)  | (142.6, 83.7)
  187 | (136.7, 107.7)  | (134.7, 83.7)
  188 | (128.8, 107.7)  | (126.8, 83.7)
  189 | (120.9, 107.7)  | (118.9, 83.7)
  190 | (113.0, 107.7)  | (111.0, 83.7)
  191 | (105.1, 107.7)  | (103.1, 83.7)
  192 | (97.2, 107.7)   | (95.2, 83.7)
  193 | (89.3, 107.7)   | (87.3, 83.7)
  194 | (81.5, 107.7)   | (79.5, 83.7)
  195 | (73.6, 107.7)   | (71.6, 83.7)
  196 | (65.7, 107.7)   | (63.7, 83.7)
  197 | (57.8, 107.7)   | (55.8, 83.7)
  198 | (49.9, 107.7)   | (47.9, 83.7)
  199 | (42.0, 107.7)   | (40.0, 83.7)
  200 | (42.0, 115.3)   | (40.0, 91.3)
  201 | (49.9, 115.3)   | (47.9, 91.3)
  202 | (57.8, 115.3)   | (55.8, 91.3)
  203 | (65.7, 115.3)   | (63.7, 91.3)
  204 | (73.6, 115.3)   | (71.6, 91.3)
  205 | (81.4, 115.3)   | (79.4, 91.3)
  206 | (89.3, 115.3)   | (87.3, 91.3)
  207 | (97.2, 115.3)   | (95.2, 91.3)
  208 | (105.1, 115.3)  | (103.1, 91.3)
  209 | (113.0, 115.3)  | (111.0, 91.3)
  210 | (120.9, 115.3)  | (118.9, 91.3)
  211 | (128.8, 115.3)  | (126.8, 91.3)
  212 | (136.7, 115.3)  | (134.7, 91.3)
  213 | (144.6, 115.3)  | (142.6, 91.3)
  214 | (152.5, 115.3)  | (150.5, 91.3)
  215 | (160.3, 115.3)  | (158.3, 91.3)
  216 | (168.2, 115.3)  | (166.2, 91.3)
  217 | (176.1, 115.3)  | (174.1, 91.3)
  218 | (184.0, 115.3)  | (182.0, 91.3)
  219 | (191.9, 115.3)  | (189.9, 91.3)
  220 | (191.9, 122.9)  | (189.9, 98.9)
  221 | (184.0, 122.9)  | (182.0, 98.9)
  222 | (176.1, 122.9)  | (174.1, 98.9)
  223 | (168.2, 122.9)  | (166.2, 98.9)
  224 | (160.3, 122.9)  | (158.3, 98.9)
  225 | (152.5, 122.9)  | (150.5, 98.9)
  226 | (144.6, 122.9)  | (142.6, 98.9)
  227 | (136.7, 122.9)  | (134.7, 98.9)
  228 | (128.8, 122.9)  | (126.8, 98.9)
  229 | (120.9, 122.9)  | (118.9, 98.9)
  230 | (113.0, 122.9)  | (111.0, 98.9)
  231 | (105.1, 122.9)  | (103.1, 98.9)
  232 | (97.2, 122.9)   | (95.2, 98.9)
  233 | (89.3, 122.9)   | (87.3, 98.9)
  234 | (81.5, 122.9)   | (79.5, 98.9)
  235 | (73.6, 122.9)   | (71.6, 98.9)
  236 | (65.7, 122.9)   | (63.7, 98.9)
  237 | (57.8, 122.9)   | (55.8, 98.9)
  238 | (49.9, 122.9)   | (47.9, 98.9)
  239 | (42.0, 122.9)   | (40.0, 98.9)
  240 | (42.0, 130.6)   | (40.0, 106.6)
  241 | (49.9, 130.6)   | (47.9, 106.6)
  242 | (57.8, 130.6)   | (55.8, 106.6)
  243 | (65.7, 130.6)   | (63.7, 106.6)
  244 | (73.6, 130.6)   | (71.6, 106.6)
  245 | (81.4, 130.6)   | (79.4, 106.6)
  246 | (89.3, 130.6)   | (87.3, 106.6)
  247 | (97.2, 130.6)   | (95.2, 106.6)
  248 | (105.1, 130.6)  | (103.1, 106.6)
  249 | (113.0, 130.6)  | (111.0, 106.6)
  250 | (120.9, 130.6)  | (118.9, 106.6)
  251 | (128.8, 130.6)  | (126.8, 106.6)
  252 | (136.7, 130.6)  | (134.7, 106.6)
  253 | (144.6, 130.6)  | (142.6, 106.6)
  254 | (152.5, 130.6)  | (150.5, 106.6)
  255 | (160.3, 130.6)  | (158.3, 106.6)
  256 | (168.2, 130.6)  | (166.2, 106.6)
  257 | (176.1, 130.6)  | (174.1, 106.6)
  258 | (184.0, 130.6)  | (182.0, 106.6)
  259 | (191.9, 130.6)  | (189.9, 106.6)
  260 | (191.9, 138.2)  | (189.9, 114.2)
  261 | (184.0, 138.2)  | (182.0, 114.2)
  262 | (176.1, 138.2)  | (174.1, 114.2)
  263 | (168.2, 138.2)  | (166.2, 114.2)
  264 | (160.3, 138.2)  | (158.3, 114.2)
  265 | (152.5, 138.2)  | (150.5, 114.2)
  266 | (144.6, 138.2)  | (142.6, 114.2)
  267 | (136.7, 138.2)  | (134.7, 114.2)
  268 | (128.8, 138.2)  | (126.8, 114.2)
  269 | (120.9, 138.2)  | (118.9, 114.2)
  270 | (113.0, 138.2)  | (111.0, 114.2)
  271 | (105.1, 138.2)  | (103.1, 114.2)
  272 | (97.2, 138.2)   | (95.2, 114.2)
  273 | (89.3, 138.2)   | (87.3, 114.2)
  274 | (81.5, 138.2)   | (79.5, 114.2)
  275 | (73.6, 138.2)   | (71.6, 114.2)
  276 | (65.7, 138.2)   | (63.7, 114.2)
  277 | (57.8, 138.2)   | (55.8, 114.2)
  278 | (49.9, 138.2)   | (47.9, 114.2)
  279 | (42.0, 138.2)   | (40.0, 114.2)
  280 | (42.0, 145.8)   | (40.0, 121.8)
  281 | (49.9, 145.8)   | (47.9, 121.8)
  282 | (57.8, 145.8)   | (55.8, 121.8)
  283 | (65.7, 145.8)   | (63.7, 121.8)
  284 | (73.6, 145.8)   | (71.6, 121.8)
  285 | (81.4, 145.8)   | (79.4, 121.8)
  286 | (89.3, 145.8)   | (87.3, 121.8)
  287 | (97.2, 145.8)   | (95.2, 121.8)
  288 | (105.1, 145.8)  | (103.1, 121.8)
  289 | (113.0, 145.8)  | (111.0, 121.8)
  290 | (120.9, 145.8)  | (118.9, 121.8)
  291 | (128.8, 145.8)  | (126.8, 121.8)
  292 | (136.7, 145.8)  | (134.7, 121.8)
  293 | (144.6, 145.8)  | (142.6, 121.8)
  294 | (152.5, 145.8)  | (150.5, 121.8)
  295 | (160.3, 145.8)  | (158.3, 121.8)
  296 | (168.2, 145.8)  | (166.2, 121.8)
  297 | (176.1, 145.8)  | (174.1, 121.8)
  298 | (184.0, 145.8)  | (182.0, 121.8)
  299 | (191.9, 145.8)  | (189.9, 121.8)
  300 | (191.9, 153.4)  | (189.9, 129.4)
  301 | (184.0, 153.4)  | (182.0, 129.4)
  302 | (176.1, 153.4)  | (174.1, 129.4)
  303 | (168.2, 153.4)  | (166.2, 129.4)
  304 | (160.3, 153.4)  | (158.3, 129.4)
  305 | (152.5, 153.4)  | (150.5, 129.4)
  306 | (144.6, 153.4)  | (142.6, 129.4)
  307 | (136.7, 153.4)  | (134.7, 129.4)
  308 | (128.8, 153.4)  | (126.8, 129.4)
  309 | (120.9, 153.4)  | (118.9, 129.4)
  310 | (113.0, 153.4)  | (111.0, 129.4)
  311 | (105.1, 153.4)  | (103.1, 129.4)
  312 | (97.2, 153.4)   | (95.2, 129.4)
  313 | (89.3, 153.4)   | (87.3, 129.4)
  314 | (81.5, 153.4)   | (79.5, 129.4)
  315 | (73.6, 153.4)   | (71.6, 129.4)
  316 | (65.7, 153.4)   | (63.7, 129.4)
  317 | (57.8, 153.4)   | (55.8, 129.4)
  318 | (49.9, 153.4)   | (47.9, 129.4)
  319 | (42.0, 153.4)   | (40.0, 129.4)
  320 | (42.0, 161.1)   | (40.0, 137.1)
  321 | (49.9, 161.1)   | (47.9, 137.1)
  322 | (57.8, 161.1)   | (55.8, 137.1)
  323 | (65.7, 161.1)   | (63.7, 137.1)
  324 | (73.6, 161.1)   | (71.6, 137.1)
  325 | (81.4, 161.1)   | (79.4, 137.1)
  326 | (89.3, 161.1)   | (87.3, 137.1)
  327 | (97.2, 161.1)   | (95.2, 137.1)
  328 | (105.1, 161.1)  | (103.1, 137.1)
  329 | (113.0, 161.1)  | (111.0, 137.1)
  330 | (120.9, 161.1)  | (118.9, 137.1)
  331 | (128.8, 161.1)  | (126.8, 137.1)
  332 | (136.7, 161.1)  | (134.7, 137.1)
  333 | (144.6, 161.1)  | (142.6, 137.1)
  334 | (152.5, 161.1)  | (150.5, 137.1)
  335 | (160.3, 161.1)  | (158.3, 137.1)
  336 | (168.2, 161.1)  | (166.2, 137.1)
  337 | (176.1, 161.1)  | (174.1, 137.1)
  338 | (184.0, 161.1)  | (182.0, 137.1)
  339 | (191.9, 161.1)  | (189.9, 137.1)
  340 | (191.9, 168.7)  | (189.9, 144.7)
  341 | (184.0, 168.7)  | (182.0, 144.7)
  342 | (176.1, 168.7)  | (174.1, 144.7)
  343 | (168.2, 168.7)  | (166.2, 144.7)
  344 | (160.3, 168.7)  | (158.3, 144.7)
  345 | (152.5, 168.7)  | (150.5, 144.7)
  346 | (144.6, 168.7)  | (142.6, 144.7)
  347 | (136.7, 168.7)  | (134.7, 144.7)
  348 | (128.8, 168.7)  | (126.8, 144.7)
  349 | (120.9, 168.7)  | (118.9, 144.7)
  350 | (113.0, 168.7)  | (111.0, 144.7)
  351 | (105.1, 168.7)  | (103.1, 144.7)
  352 | (97.2, 168.7)   | (95.2, 144.7)
  353 | (89.3, 168.7)   | (87.3, 144.7)
  354 | (81.5, 168.7)   | (79.5, 144.7)
  355 | (73.6, 168.7)   | (71.6, 144.7)
  356 | (65.7, 168.7)   | (63.7, 144.7)
  357 | (57.8, 168.7)   | (55.8, 144.7)
  358 | (49.9, 168.7)   | (47.9, 144.7)
  359 | (42.0, 168.7)   | (40.0, 144.7)
  360 | (42.0, 176.3)   | (40.0, 152.3)
  361 | (49.9, 176.3)   | (47.9, 152.3)
  362 | (57.8, 176.3)   | (55.8, 152.3)
  363 | (65.7, 176.3)   | (63.7, 152.3)
  364 | (73.6, 176.3)   | (71.6, 152.3)
  365 | (81.4, 176.3)   | (79.4, 152.3)
  366 | (89.3, 176.3)   | (87.3, 152.3)
  367 | (97.2, 176.3)   | (95.2, 152.3)
  368 | (105.1, 176.3)  | (103.1, 152.3)
  369 | (113.0, 176.3)  | (111.0, 152.3)
  370 | (120.9, 176.3)  | (118.9, 152.3)
  371 | (128.8, 176.3)  | (126.8, 152.3)
  372 | (136.7, 176.3)  | (134.7, 152.3)
  373 | (144.6, 176.3)  | (142.6, 152.3)
  374 | (152.5, 176.3)  | (150.5, 152.3)
  375 | (160.3, 176.3)  | (158.3, 152.3)
  376 | (168.2, 176.3)  | (166.2, 152.3)
  377 | (176.1, 176.3)  | (174.1, 152.3)
  378 | (184.0, 176.3)  | (182.0, 152.3)
  379 | (191.9, 176.3)  | (189.9, 152.3)
  380 | (191.9, 184.0)  | (189.9, 160.0)
  381 | (184.0, 184.0)  | (182.0, 160.0)
  382 | (176.1, 184.0)  | (174.1, 160.0)
  383 | (168.2, 184.0)  | (166.2, 160.0)
  384 | (160.3, 184.0)  | (158.3, 160.0)
  385 | (152.5, 184.0)  | (150.5, 160.0)
  386 | (144.6, 184.0)  | (142.6, 160.0)
  387 | (136.7, 184.0)  | (134.7, 160.0)
  388 | (128.8, 184.0)  | (126.8, 160.0)
  389 | (120.9, 184.0)  | (118.9, 160.0)
  390 | (113.0, 184.0)  | (111.0, 160.0)
  391 | (105.1, 184.0)  | (103.1, 160.0)
  392 | (97.2, 184.0)   | (95.2, 160.0)
  393 | (89.3, 184.0)   | (87.3, 160.0)
  394 | (81.5, 184.0)   | (79.5, 160.0)
  395 | (73.6, 184.0)   | (71.6, 160.0)
  396 | (65.7, 184.0)   | (63.7, 160.0)
  397 | (57.8, 184.0)   | (55.8, 160.0)
  398 | (49.9, 184.0)   | (47.9, 160.0)
  399 | (42.0, 184.0)   | (40.0, 160.0)
Starting heater checks for extruder
Stats 559.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1452 bytes_read=4870 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999440 pico: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2520 bytes_read=5695 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999668 adj=11999690  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.15 cputime=2.396 memavail=675412 print_time=128449.652 buffer_time=0.248 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 548530659280
webhooks: registering remote method 'reboot_machine' for connection id: 548530659280
webhooks: registering remote method 'pause_job_queue' for connection id: 548530659280
webhooks: registering remote method 'start_job_queue' for connection id: 548530659280
Stats 560.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1458 bytes_read=4991 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998838 pico: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2526 bytes_read=5711 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999904 adj=11999766  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.14 cputime=2.503 memavail=679636 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 561.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1464 bytes_read=5097 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998689 pico: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2532 bytes_read=5727 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999931 adj=12000367  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.14 cputime=2.536 memavail=679636 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 562.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000017 bytes_write=1470 bytes_read=5233 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998658 pico: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2538 bytes_read=5743 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999942 adj=12000415  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.14 cputime=2.554 memavail=679644 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 563.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000017 bytes_write=1476 bytes_read=5354 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998602 pico: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2544 bytes_read=5773 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999950 adj=12000393  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.14 cputime=2.571 memavail=679644 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 564.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000017 bytes_write=1482 bytes_read=5460 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998594 pico: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2550 bytes_read=5789 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999956 adj=12000388  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.14 cputime=2.588 memavail=679644 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 565.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000017 bytes_write=1488 bytes_read=5581 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998604 pico: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2556 bytes_read=5805 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999958 adj=12000365  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.13 cputime=2.606 memavail=679644 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 566.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000019 mcu_task_stddev=0.000017 bytes_write=1494 bytes_read=5702 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998698 pico: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2562 bytes_read=5821 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999976 adj=12000328  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=2.636 memavail=679644 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 567.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1500 bytes_read=5822 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998774 pico: mcu_awake=0.003 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2568 bytes_read=5837 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999985 adj=12000301  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=2.666 memavail=679420 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 568.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1506 bytes_read=5943 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998811 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2574 bytes_read=5864 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999995 adj=12000260  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=2.696 memavail=679172 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 569.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1512 bytes_read=6064 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998818 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2580 bytes_read=5880 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000001 adj=12000259  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=2.727 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 570.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1518 bytes_read=6170 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998812 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2586 bytes_read=5896 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999998 adj=12000266  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=2.755 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 571.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1524 bytes_read=6291 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998794 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2592 bytes_read=5912 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999997 adj=12000247  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=2.785 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 572.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1530 bytes_read=6426 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998793 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2598 bytes_read=5928 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999998 adj=12000250  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=2.815 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 573.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1536 bytes_read=6532 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998793 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2604 bytes_read=5955 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999996 adj=12000250  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.12 cputime=2.844 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 574.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1542 bytes_read=6653 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998783 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2610 bytes_read=5971 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999996 adj=12000233  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.12 cputime=2.874 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 575.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1548 bytes_read=6774 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998775 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2616 bytes_read=5987 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999996 adj=12000243  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.11 cputime=2.904 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 576.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1554 bytes_read=6880 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998776 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2622 bytes_read=6003 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999997 adj=12000247  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=2.933 memavail=677956 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
DUMP_TMC stepper_x
========== Write-only registers ==========
GLOBALSCALER: 00000087 globalscaler=135
IHOLD_IRUN: 00061616 ihold=22 irun=22 iholddelay=6
MSLUT0:     aaaab554 mslut0=2863314260
MSLUT1:     4a9554aa mslut1=1251300522
MSLUT2:     24492929 mslut2=608774441
MSLUT3:     10104222 mslut3=269500962
MSLUT4:     fbffffff mslut4=4227858431
MSLUT5:     b5bb777d mslut5=3048961917
MSLUT6:     49295556 mslut6=1227445590
MSLUT7:     00404222 mslut7=4211234
MSLUTSEL:   ffff8056 w0=2 w1=1 w2=1 w3=1 x1=128 x2=255 x3=255
MSLUTSTART: 00f70000 start_sin90=247
TPWMTHRS:   000fffff tpwmthrs=1048575
TCOOLTHRS:  00000000
THIGH:      00000000
COOLCONF:   00000000
DRV_CONF:   00000400 bbmclks=4
PWMCONF:    c40c001e pwm_ofs=30 pwm_autoscale=1 pwm_autograd=1 pwm_reg=4 pwm_lim=12
TPOWERDOWN: 0000000a tpowerdown=10
========== Queried registers ==========
GCONF:      00000008 multistep_filt=1
CHOPCONF:   345007f3 toff=3 hstrt=7 hend=15 tpfd=5 mres=4(16usteps) intpol=1 dedge=1
GSTAT:      00000005 reset=1(Reset) uv_cp=1(Undervoltage!)
DRV_STATUS: 80160000 cs_actual=22 stst=1
FACTORY_CONF: 0000000d factory_conf=13
IOIN:       30000050 drv_enn=1 sd_mode=1 version=0x30
LOST_STEPS: 00000000
MSCNT:      00000008 mscnt=8
MSCURACT:   00f7000c cur_a=12 cur_b=247
OTP_READ:   0000000d otp_fclktrim=13
PWM_SCALE:  00000014 pwm_scale_sum=20
PWM_AUTO:   0000001d pwm_ofs_auto=29
TSTEP:      000fffff tstep=1048575
Stats 577.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1560 bytes_read=7015 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998765 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=2966 bytes_read=6318 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=12000000 adj=12000242  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=3.073 memavail=677980 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 578.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1566 bytes_read=7136 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998742 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2972 bytes_read=6348 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999996 adj=12000266  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=3.091 memavail=677968 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 579.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1572 bytes_read=7242 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998728 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2978 bytes_read=6364 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999991 adj=12000263  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.11 cputime=3.107 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 580.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1578 bytes_read=7363 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998714 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2984 bytes_read=6380 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999987 adj=12000240  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=3.125 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 581.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1584 bytes_read=7484 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998701 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2990 bytes_read=6396 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999983 adj=12000227  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=3.142 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 582.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1590 bytes_read=7604 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998687 pico: mcu_awake=0.001 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=2996 bytes_read=6412 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000221  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.10 cputime=3.162 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 583.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1596 bytes_read=7725 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998692 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3002 bytes_read=6439 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000222  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.10 cputime=3.192 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 584.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1602 bytes_read=7846 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998697 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3008 bytes_read=6455 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000217  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.10 cputime=3.222 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 585.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1608 bytes_read=7952 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998697 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3014 bytes_read=6471 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000216  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.09 cputime=3.251 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 586.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1614 bytes_read=8073 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998702 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3020 bytes_read=6487 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000213  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.09 cputime=3.281 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 587.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1620 bytes_read=8208 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998718 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3026 bytes_read=6503 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000211  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.09 cputime=3.312 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 588.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1626 bytes_read=8314 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998717 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3032 bytes_read=6530 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000191  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.09 cputime=3.341 memavail=677220 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 589.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1632 bytes_read=8435 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998717 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3038 bytes_read=6546 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000197  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.09 cputime=3.370 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 590.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1638 bytes_read=8556 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998719 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3044 bytes_read=6562 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000201  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.16 cputime=3.401 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 591.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1644 bytes_read=8662 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3050 bytes_read=6578 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000205  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.16 cputime=3.430 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 592.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1650 bytes_read=8797 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998717 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3056 bytes_read=6594 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000212  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.16 cputime=3.460 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 593.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1656 bytes_read=8918 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998718 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3062 bytes_read=6621 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000214  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.16 cputime=3.490 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 594.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1662 bytes_read=9024 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998722 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3068 bytes_read=6637 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000221  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.16 cputime=3.520 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 595.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1668 bytes_read=9145 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998728 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3074 bytes_read=6653 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000215  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.15 cputime=3.551 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 596.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1674 bytes_read=9266 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998724 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3080 bytes_read=6669 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999981 adj=12000211  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.15 cputime=3.581 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 597.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1680 bytes_read=9386 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998722 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3086 bytes_read=6685 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000217  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.15 cputime=3.611 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 598.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1686 bytes_read=9507 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3092 bytes_read=6712 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000215  heater_bed: target=0 temp=25.3 pwm=0.000 sysload=0.15 cputime=3.641 memavail=676244 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 599.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1692 bytes_read=9628 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998717 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3098 bytes_read=6728 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000219  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.15 cputime=3.671 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 600.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1698 bytes_read=9734 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998716 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3104 bytes_read=6744 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000221  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.14 cputime=3.700 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 601.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1704 bytes_read=9855 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998715 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3116 bytes_read=6776 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000219  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.14 cputime=3.731 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 602.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1710 bytes_read=9990 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998720 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3122 bytes_read=6792 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000224  heater_bed: target=0 temp=25.1 pwm=0.000 sysload=0.14 cputime=3.760 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 603.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1716 bytes_read=10096 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998718 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3128 bytes_read=6819 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000216  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.14 cputime=3.790 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 604.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1722 bytes_read=10217 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998715 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3134 bytes_read=6835 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000222  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.14 cputime=3.820 memavail=675500 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 606.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1728 bytes_read=10338 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998712 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3140 bytes_read=6851 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000228  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.13 cputime=3.849 memavail=675520 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 607.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1734 bytes_read=10444 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998708 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3146 bytes_read=6867 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999980 adj=12000234  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=3.878 memavail=675520 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 608.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1740 bytes_read=10579 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998706 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3152 bytes_read=6883 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000235  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.13 cputime=3.908 memavail=675520 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 609.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1746 bytes_read=10700 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998707 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3158 bytes_read=6910 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000233  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.13 cputime=3.938 memavail=675520 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 610.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1752 bytes_read=10806 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998702 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3164 bytes_read=6926 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000229  heater_bed: target=0 temp=24.6 pwm=0.000 sysload=0.13 cputime=3.966 memavail=675536 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 611.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1758 bytes_read=10927 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998701 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3170 bytes_read=6942 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000235  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=3.996 memavail=675536 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 612.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1764 bytes_read=11048 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998701 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3176 bytes_read=6958 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999979 adj=12000233  heater_bed: target=0 temp=24.7 pwm=0.000 sysload=0.12 cputime=4.025 memavail=675536 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 613.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1770 bytes_read=11168 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998700 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3182 bytes_read=6974 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999978 adj=12000227  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.12 cputime=4.054 memavail=675536 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 614.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1776 bytes_read=11289 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998701 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3188 bytes_read=7001 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999978 adj=12000221  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=4.084 memavail=675536 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 615.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1782 bytes_read=11410 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998698 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3194 bytes_read=7017 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000217  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.12 cputime=4.113 memavail=675540 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 616.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1788 bytes_read=11516 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998698 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3200 bytes_read=7033 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000218  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.11 cputime=4.141 memavail=675540 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 617.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1794 bytes_read=11637 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998695 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3206 bytes_read=7049 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000218  heater_bed: target=0 temp=24.9 pwm=0.000 sysload=0.11 cputime=4.171 memavail=675540 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 618.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1800 bytes_read=11758 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998694 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3212 bytes_read=7065 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000224  heater_bed: target=0 temp=25.0 pwm=0.000 sysload=0.11 cputime=4.201 memavail=675540 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 619.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1806 bytes_read=11878 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998692 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3218 bytes_read=7092 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000229  heater_bed: target=0 temp=24.8 pwm=0.000 sysload=0.11 cputime=4.231 memavail=675540 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 620.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000015 mcu_task_stddev=0.000010 bytes_write=1818 bytes_read=11999 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=198 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998692 pico: mcu_awake=0.000 mcu_task_avg=0.000004 mcu_task_stddev=0.000003 bytes_write=3224 bytes_read=7108 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=11999977 adj=12000229  heater_bed: target=0 temp=25.2 pwm=0.000 sysload=0.11 cputime=4.261 memavail=675544 print_time=128449.652 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000