INFO ESPHome 2024.9.2
INFO Reading configuration /config/esphome/inverter.yaml...
INFO Updating https://github.com/syssi/esphome-jk-bms.git@main
INFO Detected timezone 'Europe/Warsaw'
INFO Starting log output from 192.168.0.5 using esphome API
INFO Successfully connected to inverter @ 192.168.0.5 in 0.067s
INFO Successful handshake with inverter @ 192.168.0.5 in 0.027s
[11:06:07][I][app:100]: ESPHome version 2024.9.2 compiled on Oct  7 2024, 10:47:36
[11:06:07][I][app:102]: Project syssi.esphome-smg-ii version 1.2.0
[11:06:07][C][wifi:600]: WiFi:
[11:06:07][C][wifi:428]:   Local MAC: 48:CA:43:D6:92:70
[11:06:08][C][wifi:433]:   SSID: 'TrickyHome'[redacted]
[11:06:08][C][wifi:436]:   IP Address: 192.168.0.5
[11:06:08][C][wifi:440]:   BSSID: 8A:48:B8:EE:F2:98[redacted]
[11:06:08][C][wifi:441]:   Hostname: 'inverter'
[11:06:08][C][wifi:443]:   Signal strength: -68 dB ▂▄▆█
[11:06:08][C][wifi:447]:   Channel: 1
[11:06:08][C][wifi:448]:   Subnet: 255.255.255.0
[11:06:08][C][wifi:449]:   Gateway: 192.168.0.1
[11:06:08][C][wifi:450]:   DNS1: 192.168.0.1
[11:06:08][C][wifi:451]:   DNS2: 0.0.0.0
[11:06:08][C][logger:185]: Logger:
[11:06:08][C][logger:186]:   Level: DEBUG
[11:06:08][C][modbus.number:083]: modbus.number  Unit of Measurement: 'V'
[11:06:08][C][modbus.number:083]: modbus.numberModbus Number 'inverter battery overvoltage protection point'
[11:06:08][C][modbus.number:083]: modbus.numberModbus Number 'inverter floating charging voltage'
[11:06:08][C][modbus.number:083]: modbus.number  Unit of Measurement: 'V'
[11:06:08][C][modbus.number:083]: modbus.numberModbus Number 'inverter battery discharge recovery point in mains mode'
[11:06:08][C][modbus.number:083]: modbus.numberModbus Number 'inverter equalization Timeout exit'
[11:06:08][C][jk_bms_ble.button:010]: JkBmsBle Button 'jk-bms retrieve settings'
[11:06:08][C][jk_bms_ble.button:010]: JkBmsBle Button 'jk-bms retrieve device info'
[11:06:08][C][jk_bms_ble.button:010]:   Icon: 'mdi:information-variant'
[11:06:08][C][modbus_controller:345]: ModbusController:
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  State Class: 'measurement'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter average mains power'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter effective inverter current'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  Device Class: 'current'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  State Class: 'measurement'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter output frequency'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter output apparent power'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter battery average voltage'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter battery average Current'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  Device Class: 'current'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter pv average voltage'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter inverter temperature'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  Device Class: 'temperature'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter battery average current'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  State Class: 'measurement'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensor  State Class: 'measurement'
[11:06:08][C][modbus_controller.sensor:010]: modbus_controller.sensorModbus Controller Sensor 'inverter pv charging average current'
[11:06:08][C][modbus_controller.select:009]: modbus_controller.selectModbus Controller Select 'inverter lcd backlight'
[11:06:08][C][modbus_controller.select:009]: modbus_controller.selectModbus Controller Select 'inverter turn on mode'
[11:06:08][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms charging'
[11:06:08][C][jk_bms_ble.switch:091]:   Restore Mode: always OFF
[11:06:08][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms discharging'
[11:06:08][C][jk_bms_ble.switch:091]:   Restore Mode: always OFF
[11:06:08][C][jk_bms_ble.switch:068]: JkBmsBle Switch 'jk-bms timed stored data'
[11:06:08][C][ble_switch:068]: BLE Client Switch 'jk-bms enable bluetooth connection'
[11:06:08][C][ble_switch:070]:   Icon: 'mdi:bluetooth'
[11:06:08][C][modbus_controller.switch:068]: modbus_controller.switchModbus Controller Switch 'inverter energy-saving mode'
[11:06:08][C][modbus_controller.text_sensor:012]: Modbus Controller Text Sensor 'inverter fault'
[11:06:08][C][modbus_controller.text_sensor:012]: Modbus Controller Text Sensor 'inverter operation mode'
[11:06:08][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms smart sleep voltage'
[11:06:08][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms cell voltage undervoltage protection'
[11:06:08][C][jk_bms_ble.number:009]:   Unit of Measurement: 'V'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms cell voltage overvoltage protection'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms cell count'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms total battery capacity'
[11:06:09][C][jk_bms_ble.number:009]:   Unit of Measurement: 'Ah'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms voltage calibration'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms current calibration'
[11:06:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms discharge overcurrent protection delay'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms discharge overcurrent protection recovery time'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms short circuit protection delay'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms charge overtemperature protection'
[11:06:09][C][jk_bms_ble.number:009]: JkBmsBle Number 'jk-bms power tube overtemperature protection'
[11:06:09][C][jk_bms_ble.number:009]:   Unit of Measurement: '°C'
[11:06:09][C][esp32_ble:391]: ESP32 BLE:
[11:06:09][C][esp32_ble:393]:   MAC address: 48:CA:43:D6:92:72
[11:06:09][C][ble_client:027]: BLE Client:
[11:06:09][C][ble_client:028]:   Address: C8:47:80:1D:83:65
[11:06:09][C][sntp:051]:   Server 3: '2.pool.ntp.org'
[11:06:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:10][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:10][D][sensor:094]: 'inverter fault code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:10][D][text_sensor:064]: 'inverter fault': Sending state ''
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:11][D][sensor:094]: 'inverter warning code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:11][D][text_sensor:064]: 'inverter warning': Sending state ''
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 3.00
[11:06:11][D][sensor:094]: 'inverter operation mode id': Sending state 3.00000  with 0 decimals of accuracy
[11:06:11][D][text_sensor:064]: 'inverter operation mode': Sending state 'Off-Grid'
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 2356.00
[11:06:11][D][sensor:094]: 'inverter ac voltage': Sending state 235.60001 V with 1 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 4997.00
[11:06:11][D][sensor:094]: 'inverter ac frequency': Sending state 49.97000 Hz with 2 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:11][D][sensor:094]: 'inverter average mains power': Sending state 0.00000 W with 0 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:06:11][D][sensor:094]: 'inverter effective inverter voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 19.00
[11:06:11][D][sensor:094]: 'inverter effective inverter current': Sending state 1.90000 A with 1 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:06:11][D][sensor:094]: 'inverter inverter frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 251.00
[11:06:11][D][sensor:094]: 'inverter average inverter power': Sending state 251.00000 W with 0 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 1271.00
[11:06:11][D][sensor:094]: 'inverter pv average voltage': Sending state 127.10000 V with 1 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 23.00
[11:06:11][D][sensor:094]: 'inverter pv average current': Sending state 2.30000 A with 1 decimals of accuracy
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 302.00
[11:06:11][D][sensor:094]: 'inverter pv average power': Sending state 302.00000 W with 0 decimals of accuracy
[11:06:11][D][sensor:094]: 'inverter PV energy today': Sending state 0.23805 kWh with 2 decimals of accuracy
[11:06:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:11][D][sensor:094]: 'inverter pv charging average power': Sending state 0.00000 W with 0 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 8.00
[11:06:12][D][sensor:094]: 'inverter load percentage': Sending state 8.00000 % with 0 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:06:12][D][sensor:094]: 'inverter dcdc temperature': Sending state 18.00000 °C with 0 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 84.00
[11:06:12][D][sensor:094]: 'inverter battery state of charge': Sending state 84.00000 % with 0 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:12][D][sensor:094]: 'inverter battery average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:12][D][sensor:094]: 'inverter inverter charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:12][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:12][D][sensor:094]: 'inverter pv charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:12][D][select:015]: 'inverter output mode': Sending state Single (index 0)
[11:06:12][D][modbus_controller.select:014]: New select value 2 from payload
[11:06:12][D][select:015]: 'inverter output priority': Sending state PV-Battery-Utility (SBU) (index 2)
[11:06:12][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:12][D][select:015]: 'inverter input voltage range': Sending state Narrow range (index 1)
[11:06:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:12][D][select:015]: 'inverter buzzer mode': Sending state Silent (index 0)
[11:06:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:12][D][select:015]: 'inverter lcd backlight': Sending state Timed off (index 0)
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:12][D][modbus.number:023]: Number new state : 230.00
[11:06:13][D][number:012]: 'inverter output voltage': Sending state 230.000000
[11:06:13][D][modbus.number:023]: Number new state : 50.00
[11:06:13][D][number:012]: 'inverter output frequency setting': Sending state 50.000000
[11:06:13][D][modbus.number:023]: Number new state : 32.00
[11:06:13][D][number:012]: 'inverter battery overvoltage protection point': Sending state 32.000000
[11:06:13][D][modbus.number:023]: Number new state : 28.50
[11:06:13][D][number:012]: 'inverter max charging voltage': Sending state 28.500000
[11:06:13][D][modbus.number:023]: Number new state : 28.20
[11:06:13][D][number:012]: 'inverter floating charging voltage': Sending state 28.200001
[11:06:13][D][modbus.number:023]: Number new state : 27.20
[11:06:13][D][number:012]: 'inverter battery discharge recovery point in mains mode': Sending state 27.200001
[11:06:13][D][modbus.number:023]: Number new state : 24.80
[11:06:13][D][number:012]: 'inverter battery low voltage protection point in mains mode': Sending state 24.800001
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][modbus.number:023]: Number new state : 24.00
[11:06:13][D][number:012]: 'inverter battery low voltage protection point in off-grid mode': Sending state 24.000000
[11:06:13][D][modbus_controller.select:014]: New select value 3 from payload
[11:06:13][D][select:015]: 'inverter battery charging priority': Sending state Only PV charging is allowed (index 3)
[11:06:13][D][modbus.number:023]: Number new state : 100.00
[11:06:13][D][number:012]: 'inverter maximum charging current': Sending state 100.000000
[11:06:13][D][modbus.number:023]: Number new state : 2.00
[11:06:13][D][number:012]: 'inverter maximum mains charging current': Sending state 2.000000
[11:06:13][D][modbus.number:023]: Number new state : 29.60
[11:06:13][D][number:012]: 'inverter Eq Charging voltage': Sending state 29.600000
[11:06:13][D][modbus.number:023]: Number new state : 30.00
[11:06:13][D][number:012]: 'inverter battery equalization time': Sending state 30.000000
[11:06:13][D][modbus.number:023]: Number new state : 120.00
[11:06:13][D][number:012]: 'inverter equalization Timeout exit': Sending state 120.000000
[11:06:13][D][modbus.number:023]: Number new state : 37.00
[11:06:13][D][number:012]: 'inverter two equalization charging intervals': Sending state 37.000000
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:13][D][select:015]: 'inverter turn on mode': Sending state Local turn-on only (index 1)
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][modbus_controller.sensor:025]: Sensor new state: 3500.00
[11:06:14][D][sensor:094]: 'inverter rated power': Sending state 3500.00000 W with 0 decimals of accuracy
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:19][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:20][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:21][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:21][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:21][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:21][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.31800 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.31800 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.31800 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 6': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 7': Sending state 3.31800 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 8': Sending state 3.32000 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms cell voltage 9': Sending state 0.00000 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms min cell voltage': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms max cell voltage': Sending state 3.32000 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms max voltage cell': Sending state 8.00000  with 0 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms min voltage cell': Sending state 3.00000  with 0 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms delta cell voltage': Sending state 0.00300 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms average cell voltage': Sending state 3.31788 V with 3 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms power tube temperature': Sending state 18.60000 °C with 1 decimals of accuracy
[11:06:22][D][sensor:094]: 'jk-bms charging power': Sending state 116.66528 W with 2 decimals of accuracy
[11:06:22][D][text_sensor:064]: 'jk-bms total runtime formatted': Sending state '24d 15h'
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:22][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:23][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:24][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:25][D][sensor:094]: 'inverter fault code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:25][D][text_sensor:064]: 'inverter fault': Sending state ''
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:25][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:26][D][sensor:094]: 'inverter warning code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:26][D][text_sensor:064]: 'inverter warning': Sending state ''
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 3.00
[11:06:26][D][sensor:094]: 'inverter operation mode id': Sending state 3.00000  with 0 decimals of accuracy
[11:06:26][D][text_sensor:064]: 'inverter operation mode': Sending state 'Off-Grid'
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 2352.00
[11:06:26][D][sensor:094]: 'inverter ac voltage': Sending state 235.20000 V with 1 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:06:26][D][sensor:094]: 'inverter ac frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:26][D][sensor:094]: 'inverter average mains power': Sending state 0.00000 W with 0 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:06:26][D][sensor:094]: 'inverter effective inverter voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:06:26][D][sensor:094]: 'inverter effective inverter current': Sending state 1.80000 A with 1 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:06:26][D][sensor:094]: 'inverter inverter frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 218.00
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 56.00
[11:06:26][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:26][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:26][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 1214.00
[11:06:26][D][sensor:094]: 'inverter pv average voltage': Sending state 121.40000 V with 1 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 411.00
[11:06:26][D][sensor:094]: 'inverter pv average power': Sending state 411.00000 W with 0 decimals of accuracy
[11:06:26][D][sensor:094]: 'inverter PV energy today': Sending state 0.23976 kWh with 2 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 112.00
[11:06:26][D][sensor:094]: 'inverter pv charging average power': Sending state 112.00000 W with 0 decimals of accuracy
[11:06:26][D][modbus_controller.sensor:025]: Sensor new state: 8.00
[11:06:27][D][sensor:094]: 'inverter load percentage': Sending state 8.00000 % with 0 decimals of accuracy
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][modbus_controller.sensor:025]: Sensor new state: 86.00
[11:06:27][D][sensor:094]: 'inverter battery state of charge': Sending state 86.00000 % with 0 decimals of accuracy
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][modbus_controller.sensor:025]: Sensor new state: 42.00
[11:06:27][D][sensor:094]: 'inverter battery average current': Sending state 4.20000 A with 1 decimals of accuracy
[11:06:27][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:27][D][sensor:094]: 'inverter inverter charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:27][D][modbus_controller.sensor:025]: Sensor new state: 44.00
[11:06:27][D][sensor:094]: 'inverter pv charging average current': Sending state 4.40000 A with 1 decimals of accuracy
[11:06:27][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:27][D][select:015]: 'inverter output mode': Sending state Single (index 0)
[11:06:27][D][modbus_controller.select:014]: New select value 2 from payload
[11:06:27][D][select:015]: 'inverter output priority': Sending state PV-Battery-Utility (SBU) (index 2)
[11:06:27][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:27][D][select:015]: 'inverter input voltage range': Sending state Narrow range (index 1)
[11:06:27][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:27][D][select:015]: 'inverter buzzer mode': Sending state Silent (index 0)
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:27][D][select:015]: 'inverter lcd backlight': Sending state Timed off (index 0)
[11:06:27][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:27][D][modbus.number:023]: Number new state : 230.00
[11:06:27][D][number:012]: 'inverter output voltage': Sending state 230.000000
[11:06:27][D][modbus.number:023]: Number new state : 50.00
[11:06:28][D][number:012]: 'inverter output frequency setting': Sending state 50.000000
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][modbus.number:023]: Number new state : 32.00
[11:06:28][D][number:012]: 'inverter battery overvoltage protection point': Sending state 32.000000
[11:06:28][D][modbus.number:023]: Number new state : 28.50
[11:06:28][D][number:012]: 'inverter max charging voltage': Sending state 28.500000
[11:06:28][D][modbus.number:023]: Number new state : 28.20
[11:06:28][D][number:012]: 'inverter floating charging voltage': Sending state 28.200001
[11:06:28][D][modbus.number:023]: Number new state : 27.20
[11:06:28][D][number:012]: 'inverter battery discharge recovery point in mains mode': Sending state 27.200001
[11:06:28][D][modbus.number:023]: Number new state : 24.80
[11:06:28][D][number:012]: 'inverter battery low voltage protection point in mains mode': Sending state 24.800001
[11:06:28][D][modbus.number:023]: Number new state : 24.00
[11:06:28][D][number:012]: 'inverter battery low voltage protection point in off-grid mode': Sending state 24.000000
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:28][D][modbus_controller.select:014]: New select value 3 from payload
[11:06:28][D][select:015]: 'inverter battery charging priority': Sending state Only PV charging is allowed (index 3)
[11:06:28][D][modbus.number:023]: Number new state : 100.00
[11:06:28][D][number:012]: 'inverter maximum charging current': Sending state 100.000000
[11:06:28][D][modbus.number:023]: Number new state : 2.00
[11:06:28][D][number:012]: 'inverter maximum mains charging current': Sending state 2.000000
[11:06:28][D][modbus.number:023]: Number new state : 29.60
[11:06:28][D][number:012]: 'inverter Eq Charging voltage': Sending state 29.600000
[11:06:28][D][modbus.number:023]: Number new state : 30.00
[11:06:28][D][number:012]: 'inverter battery equalization time': Sending state 30.000000
[11:06:28][D][modbus.number:023]: Number new state : 120.00
[11:06:28][D][number:012]: 'inverter equalization Timeout exit': Sending state 120.000000
[11:06:28][D][modbus.number:023]: Number new state : 37.00
[11:06:28][D][number:012]: 'inverter two equalization charging intervals': Sending state 37.000000
[11:06:28][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:29][D][select:015]: 'inverter turn on mode': Sending state Local turn-on only (index 1)
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][modbus_controller.sensor:025]: Sensor new state: 3500.00
[11:06:29][D][sensor:094]: 'inverter rated power': Sending state 3500.00000 W with 0 decimals of accuracy
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:29][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:30][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:31][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.32000 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 6': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 7': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 8': Sending state 3.32000 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms cell voltage 9': Sending state 0.00000 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms min cell voltage': Sending state 3.31700 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms max cell voltage': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms max voltage cell': Sending state 3.00000  with 0 decimals of accuracy
[11:06:32][D][sensor:094]: 'jk-bms min voltage cell': Sending state 2.00000  with 0 decimals of accuracy
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:32][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32.preferences:114]: Saving 1 preferences to flash...
[11:06:33][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:33][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:34][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:35][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:36][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:37][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:38][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:39][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:40][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:40][D][sensor:094]: 'inverter fault code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:40][D][text_sensor:064]: 'inverter fault': Sending state ''
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:41][D][sensor:094]: 'inverter warning code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:41][D][text_sensor:064]: 'inverter warning': Sending state ''
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 3.00
[11:06:41][D][sensor:094]: 'inverter operation mode id': Sending state 3.00000  with 0 decimals of accuracy
[11:06:41][D][text_sensor:064]: 'inverter operation mode': Sending state 'Off-Grid'
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 2356.00
[11:06:41][D][sensor:094]: 'inverter ac voltage': Sending state 235.60001 V with 1 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 5000.00
[11:06:41][D][sensor:094]: 'inverter ac frequency': Sending state 50.00000 Hz with 2 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:41][D][sensor:094]: 'inverter average mains power': Sending state 0.00000 W with 0 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:06:41][D][sensor:094]: 'inverter effective inverter voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:06:41][D][sensor:094]: 'inverter effective inverter current': Sending state 1.80000 A with 1 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:06:41][D][sensor:094]: 'inverter inverter frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 236.00
[11:06:41][D][sensor:094]: 'inverter average inverter power': Sending state 236.00000 W with 0 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 1131.00
[11:06:41][D][sensor:094]: 'inverter pv average voltage': Sending state 113.10000 V with 1 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 41.00
[11:06:41][D][sensor:094]: 'inverter pv average current': Sending state 4.10000 A with 1 decimals of accuracy
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 472.00
[11:06:41][D][sensor:094]: 'inverter pv average power': Sending state 472.00000 W with 0 decimals of accuracy
[11:06:41][D][sensor:094]: 'inverter PV energy today': Sending state 0.24173 kWh with 2 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 188.00
[11:06:41][D][sensor:094]: 'inverter pv charging average power': Sending state 188.00000 W with 0 decimals of accuracy
[11:06:41][D][modbus_controller.sensor:025]: Sensor new state: 8.00
[11:06:41][D][sensor:094]: 'inverter load percentage': Sending state 8.00000 % with 0 decimals of accuracy
[11:06:42][D][modbus_controller.sensor:025]: Sensor new state: 86.00
[11:06:42][D][sensor:094]: 'inverter battery state of charge': Sending state 86.00000 % with 0 decimals of accuracy
[11:06:42][D][modbus_controller.sensor:025]: Sensor new state: 70.00
[11:06:42][D][sensor:094]: 'inverter battery average current': Sending state 7.00000 A with 1 decimals of accuracy
[11:06:42][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:42][D][sensor:094]: 'inverter inverter charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:42][D][modbus_controller.sensor:025]: Sensor new state: 58.00
[11:06:42][D][sensor:094]: 'inverter pv charging average current': Sending state 5.80000 A with 1 decimals of accuracy
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:42][D][select:015]: 'inverter output mode': Sending state Single (index 0)
[11:06:42][D][modbus_controller.select:014]: New select value 2 from payload
[11:06:42][D][select:015]: 'inverter output priority': Sending state PV-Battery-Utility (SBU) (index 2)
[11:06:42][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:42][D][select:015]: 'inverter input voltage range': Sending state Narrow range (index 1)
[11:06:42][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:42][D][select:015]: 'inverter buzzer mode': Sending state Silent (index 0)
[11:06:42][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:42][D][select:015]: 'inverter lcd backlight': Sending state Timed off (index 0)
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:42][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.32200 V with 3 decimals of accuracy
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:42][D][sensor:094]: 'jk-bms cell voltage 6': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms cell voltage 7': Sending state 3.32300 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms cell voltage 8': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms cell voltage 9': Sending state 0.00000 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms min cell voltage': Sending state 3.32100 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms max cell voltage': Sending state 3.32300 V with 3 decimals of accuracy
[11:06:43][D][sensor:094]: 'jk-bms max voltage cell': Sending state 7.00000  with 0 decimals of accuracy
[11:06:43][D][modbus.number:023]: Number new state : 230.00
[11:06:43][D][number:012]: 'inverter output voltage': Sending state 230.000000
[11:06:43][D][modbus.number:023]: Number new state : 50.00
[11:06:43][D][number:012]: 'inverter output frequency setting': Sending state 50.000000
[11:06:43][D][modbus.number:023]: Number new state : 32.00
[11:06:43][D][number:012]: 'inverter battery overvoltage protection point': Sending state 32.000000
[11:06:43][D][modbus.number:023]: Number new state : 28.50
[11:06:43][D][number:012]: 'inverter max charging voltage': Sending state 28.500000
[11:06:43][D][modbus.number:023]: Number new state : 28.20
[11:06:43][D][number:012]: 'inverter floating charging voltage': Sending state 28.200001
[11:06:43][D][modbus.number:023]: Number new state : 27.20
[11:06:43][D][number:012]: 'inverter battery discharge recovery point in mains mode': Sending state 27.200001
[11:06:43][D][modbus.number:023]: Number new state : 24.80
[11:06:43][D][number:012]: 'inverter battery low voltage protection point in mains mode': Sending state 24.800001
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][modbus.number:023]: Number new state : 24.00
[11:06:43][D][number:012]: 'inverter battery low voltage protection point in off-grid mode': Sending state 24.000000
[11:06:43][D][modbus_controller.select:014]: New select value 3 from payload
[11:06:43][D][select:015]: 'inverter battery charging priority': Sending state Only PV charging is allowed (index 3)
[11:06:43][D][modbus.number:023]: Number new state : 100.00
[11:06:43][D][number:012]: 'inverter maximum charging current': Sending state 100.000000
[11:06:43][D][modbus.number:023]: Number new state : 2.00
[11:06:43][D][number:012]: 'inverter maximum mains charging current': Sending state 2.000000
[11:06:43][D][modbus.number:023]: Number new state : 29.60
[11:06:43][D][number:012]: 'inverter Eq Charging voltage': Sending state 29.600000
[11:06:43][D][modbus.number:023]: Number new state : 30.00
[11:06:43][D][number:012]: 'inverter battery equalization time': Sending state 30.000000
[11:06:43][D][modbus.number:023]: Number new state : 120.00
[11:06:43][D][number:012]: 'inverter equalization Timeout exit': Sending state 120.000000
[11:06:43][D][modbus.number:023]: Number new state : 37.00
[11:06:43][D][number:012]: 'inverter two equalization charging intervals': Sending state 37.000000
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:43][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:43][D][select:015]: 'inverter turn on mode': Sending state Local turn-on only (index 1)
[11:06:43][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][modbus_controller.sensor:025]: Sensor new state: 3500.00
[11:06:44][D][sensor:094]: 'inverter rated power': Sending state 3500.00000 W with 0 decimals of accuracy
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:44][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:45][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:46][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:47][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:48][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:49][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:50][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:51][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:51][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:51][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:51][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:51][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:52][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.32700 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.32900 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.33100 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.32900 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.32800 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 6': Sending state 3.33100 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 7': Sending state 3.33100 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 8': Sending state 3.32900 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms cell voltage 9': Sending state 0.00000 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms min cell voltage': Sending state 3.32700 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms max cell voltage': Sending state 3.33100 V with 3 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms max voltage cell': Sending state 3.00000  with 0 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms min voltage cell': Sending state 1.00000  with 0 decimals of accuracy
[11:06:53][D][sensor:094]: 'jk-bms delta cell voltage': Sending state 0.00400 V with 3 decimals of accuracy
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:53][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:54][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:55][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:55][D][sensor:094]: 'inverter fault code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:55][D][text_sensor:064]: 'inverter fault': Sending state ''
[11:06:55][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:56][D][sensor:094]: 'inverter warning code': Sending state 0.00000  with 0 decimals of accuracy
[11:06:56][D][text_sensor:064]: 'inverter warning': Sending state ''
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 3.00
[11:06:56][D][sensor:094]: 'inverter operation mode id': Sending state 3.00000  with 0 decimals of accuracy
[11:06:56][D][text_sensor:064]: 'inverter operation mode': Sending state 'Off-Grid'
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 2358.00
[11:06:56][D][sensor:094]: 'inverter ac voltage': Sending state 235.80000 V with 1 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 5001.00
[11:06:56][D][sensor:094]: 'inverter ac frequency': Sending state 50.01000 Hz with 2 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:56][D][sensor:094]: 'inverter average mains power': Sending state 0.00000 W with 0 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:06:56][D][sensor:094]: 'inverter effective inverter voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 19.00
[11:06:56][D][sensor:094]: 'inverter effective inverter current': Sending state 1.90000 A with 1 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 5000.00
[11:06:56][D][sensor:094]: 'inverter inverter frequency': Sending state 50.00000 Hz with 2 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 258.00
[11:06:56][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 1331.00
[11:06:56][D][sensor:094]: 'inverter pv average voltage': Sending state 133.10001 V with 1 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 31.00
[11:06:56][D][sensor:094]: 'inverter pv average current': Sending state 3.10000 A with 1 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 395.00
[11:06:56][D][sensor:094]: 'inverter pv average power': Sending state 395.00000 W with 0 decimals of accuracy
[11:06:56][D][sensor:094]: 'inverter PV energy today': Sending state 0.24337 kWh with 2 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 75.00
[11:06:56][D][sensor:094]: 'inverter pv charging average power': Sending state 75.00000 W with 0 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 9.00
[11:06:56][D][sensor:094]: 'inverter load percentage': Sending state 9.00000 % with 0 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:06:56][D][sensor:094]: 'inverter dcdc temperature': Sending state 18.00000 °C with 0 decimals of accuracy
[11:06:56][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][modbus_controller.sensor:025]: Sensor new state: 86.00
[11:06:57][D][sensor:094]: 'inverter battery state of charge': Sending state 86.00000 % with 0 decimals of accuracy
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][modbus_controller.sensor:025]: Sensor new state: 14.00
[11:06:57][D][sensor:094]: 'inverter battery average current': Sending state 1.40000 A with 1 decimals of accuracy
[11:06:57][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:06:57][D][sensor:094]: 'inverter inverter charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:06:57][D][modbus_controller.sensor:025]: Sensor new state: 97.00
[11:06:57][D][sensor:094]: 'inverter pv charging average current': Sending state 9.70000 A with 1 decimals of accuracy
[11:06:57][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:57][D][select:015]: 'inverter output mode': Sending state Single (index 0)
[11:06:57][D][modbus_controller.select:014]: New select value 2 from payload
[11:06:57][D][select:015]: 'inverter output priority': Sending state PV-Battery-Utility (SBU) (index 2)
[11:06:57][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:57][D][select:015]: 'inverter input voltage range': Sending state Narrow range (index 1)
[11:06:57][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:57][D][select:015]: 'inverter buzzer mode': Sending state Silent (index 0)
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][modbus_controller.select:014]: New select value 0 from payload
[11:06:57][D][select:015]: 'inverter lcd backlight': Sending state Timed off (index 0)
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:57][D][modbus.number:023]: Number new state : 230.00
[11:06:57][D][number:012]: 'inverter output voltage': Sending state 230.000000
[11:06:57][D][modbus.number:023]: Number new state : 50.00
[11:06:58][D][number:012]: 'inverter output frequency setting': Sending state 50.000000
[11:06:58][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:58][D][modbus.number:023]: Number new state : 32.00
[11:06:58][D][number:012]: 'inverter battery overvoltage protection point': Sending state 32.000000
[11:06:58][D][modbus.number:023]: Number new state : 28.50
[11:06:58][D][number:012]: 'inverter max charging voltage': Sending state 28.500000
[11:06:58][D][modbus.number:023]: Number new state : 28.20
[11:06:58][D][number:012]: 'inverter floating charging voltage': Sending state 28.200001
[11:06:58][D][modbus.number:023]: Number new state : 27.20
[11:06:58][D][number:012]: 'inverter battery discharge recovery point in mains mode': Sending state 27.200001
[11:06:58][D][modbus.number:023]: Number new state : 24.80
[11:06:58][D][number:012]: 'inverter battery low voltage protection point in mains mode': Sending state 24.800001
[11:06:58][D][modbus.number:023]: Number new state : 24.00
[11:06:58][D][number:012]: 'inverter battery low voltage protection point in off-grid mode': Sending state 24.000000
[11:06:58][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:58][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:58][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:58][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:58][D][modbus_controller.select:014]: New select value 3 from payload
[11:06:58][D][select:015]: 'inverter battery charging priority': Sending state Only PV charging is allowed (index 3)
[11:06:58][D][modbus.number:023]: Number new state : 100.00
[11:06:58][D][number:012]: 'inverter maximum charging current': Sending state 100.000000
[11:06:58][D][modbus.number:023]: Number new state : 2.00
[11:06:58][D][number:012]: 'inverter maximum mains charging current': Sending state 2.000000
[11:06:58][D][modbus.number:023]: Number new state : 29.60
[11:06:58][D][number:012]: 'inverter Eq Charging voltage': Sending state 29.600000
[11:06:58][D][modbus.number:023]: Number new state : 30.00
[11:06:58][D][number:012]: 'inverter battery equalization time': Sending state 30.000000
[11:06:58][D][modbus.number:023]: Number new state : 120.00
[11:06:58][D][number:012]: 'inverter equalization Timeout exit': Sending state 120.000000
[11:06:58][D][modbus.number:023]: Number new state : 37.00
[11:06:58][D][number:012]: 'inverter two equalization charging intervals': Sending state 37.000000
[11:06:58][D][modbus_controller.select:014]: New select value 1 from payload
[11:06:58][D][select:015]: 'inverter turn on mode': Sending state Local turn-on only (index 1)
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][modbus_controller.sensor:025]: Sensor new state: 3500.00
[11:06:59][D][sensor:094]: 'inverter rated power': Sending state 3500.00000 W with 0 decimals of accuracy
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:06:59][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:00][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:01][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:02][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.31800 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.31800 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 6': Sending state 3.31800 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 7': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 8': Sending state 3.32000 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms cell voltage 9': Sending state 0.00000 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms min cell voltage': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms max cell voltage': Sending state 3.32000 V with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms max voltage cell': Sending state 8.00000  with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms min voltage cell': Sending state 1.00000  with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms power tube temperature': Sending state 18.60000 °C with 1 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms balancing current': Sending state 0.00000 A with 2 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms balancing': Sending state 0.00000  with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms state of charge': Sending state 41.00000 % with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms capacity remaining': Sending state 113.56300 Ah with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms total battery capacity setting': Sending state 280.00000 Ah with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms charging cycles': Sending state 11.00000  with 0 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms total charging cycle capacity': Sending state 3242.58716 Ah with 3 decimals of accuracy
[11:07:03][D][sensor:094]: 'jk-bms total runtime': Sending state 2129769.00000 s with 0 decimals of accuracy
[11:07:03][D][text_sensor:064]: 'jk-bms total runtime formatted': Sending state '24d 15h'
[11:07:03][D][sensor:094]: 'jk-bms heating current': Sending state 0.00000 A with 2 decimals of accuracy
[11:07:03][I][jk_bms_ble:593]: Emergency switch: OFF
[11:07:03][D][sensor:094]: 'jk-bms temperature sensor 4': Sending state 0.00000 °C with 1 decimals of accuracy
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:03][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:04][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:04][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:04][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:04][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:04][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:05][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:06][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:07][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:08][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:09][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:10][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:10][D][sensor:094]: 'inverter fault code': Sending state 0.00000  with 0 decimals of accuracy
[11:07:10][D][text_sensor:064]: 'inverter fault': Sending state ''
[11:07:10][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:11][D][sensor:094]: 'inverter warning code': Sending state 0.00000  with 0 decimals of accuracy
[11:07:11][D][text_sensor:064]: 'inverter warning': Sending state ''
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 3.00
[11:07:11][D][sensor:094]: 'inverter operation mode id': Sending state 3.00000  with 0 decimals of accuracy
[11:07:11][D][text_sensor:064]: 'inverter operation mode': Sending state 'Off-Grid'
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 2359.00
[11:07:11][D][sensor:094]: 'inverter ac voltage': Sending state 235.90001 V with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:07:11][D][sensor:094]: 'inverter ac frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:11][D][sensor:094]: 'inverter average mains power': Sending state 0.00000 W with 0 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:07:11][D][sensor:094]: 'inverter effective inverter voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:07:11][D][sensor:094]: 'inverter effective inverter current': Sending state 1.80000 A with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:07:11][D][sensor:094]: 'inverter inverter frequency': Sending state 49.99000 Hz with 2 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 230.00
[11:07:11][D][sensor:094]: 'inverter average inverter power': Sending state 230.00000 W with 0 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:11][D][sensor:094]: 'inverter inverter charging power': Sending state 0.00000 W with 0 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 2301.00
[11:07:11][D][sensor:094]: 'inverter output effective voltage': Sending state 230.10001 V with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 13.00
[11:07:11][D][sensor:094]: 'inverter output effective Current': Sending state 1.30000 A with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 4999.00
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 1300.00
[11:07:11][D][sensor:094]: 'inverter pv average voltage': Sending state 130.00000 V with 1 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 25.00
[11:07:11][D][sensor:094]: 'inverter pv average current': Sending state 2.50000 A with 1 decimals of accuracy
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 331.00
[11:07:11][D][sensor:094]: 'inverter pv average power': Sending state 331.00000 W with 0 decimals of accuracy
[11:07:11][D][sensor:094]: 'inverter PV energy today': Sending state 0.24476 kWh with 2 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 37.00
[11:07:11][D][sensor:094]: 'inverter pv charging average power': Sending state 37.00000 W with 0 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 9.00
[11:07:11][D][sensor:094]: 'inverter load percentage': Sending state 9.00000 % with 0 decimals of accuracy
[11:07:11][D][modbus_controller.sensor:025]: Sensor new state: 18.00
[11:07:12][D][sensor:094]: 'inverter dcdc temperature': Sending state 18.00000 °C with 0 decimals of accuracy
[11:07:12][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:12][D][modbus_controller.sensor:025]: Sensor new state: 86.00
[11:07:12][D][sensor:094]: 'inverter battery state of charge': Sending state 86.00000 % with 0 decimals of accuracy
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][modbus_controller.sensor:025]: Sensor new state: 14.00
[11:07:12][D][sensor:094]: 'inverter battery average current': Sending state 1.40000 A with 1 decimals of accuracy
[11:07:12][D][modbus_controller.sensor:025]: Sensor new state: 0.00
[11:07:12][D][sensor:094]: 'inverter inverter charging average current': Sending state 0.00000 A with 1 decimals of accuracy
[11:07:12][D][modbus_controller.sensor:025]: Sensor new state: 16.00
[11:07:12][D][sensor:094]: 'inverter pv charging average current': Sending state 1.60000 A with 1 decimals of accuracy
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:07:12][D][select:015]: 'inverter output mode': Sending state Single (index 0)
[11:07:12][D][modbus_controller.select:014]: New select value 2 from payload
[11:07:12][D][select:015]: 'inverter output priority': Sending state PV-Battery-Utility (SBU) (index 2)
[11:07:12][D][modbus_controller.select:014]: New select value 1 from payload
[11:07:12][D][select:015]: 'inverter input voltage range': Sending state Narrow range (index 1)
[11:07:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:07:12][D][select:015]: 'inverter buzzer mode': Sending state Silent (index 0)
[11:07:12][D][modbus_controller.select:014]: New select value 0 from payload
[11:07:12][D][select:015]: 'inverter lcd backlight': Sending state Timed off (index 0)
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:12][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][modbus.number:023]: Number new state : 230.00
[11:07:13][D][number:012]: 'inverter output voltage': Sending state 230.000000
[11:07:13][D][modbus.number:023]: Number new state : 50.00
[11:07:13][D][number:012]: 'inverter output frequency setting': Sending state 50.000000
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][modbus.number:023]: Number new state : 32.00
[11:07:13][D][number:012]: 'inverter battery overvoltage protection point': Sending state 32.000000
[11:07:13][D][modbus.number:023]: Number new state : 28.50
[11:07:13][D][number:012]: 'inverter max charging voltage': Sending state 28.500000
[11:07:13][D][modbus.number:023]: Number new state : 28.20
[11:07:13][D][number:012]: 'inverter floating charging voltage': Sending state 28.200001
[11:07:13][D][modbus.number:023]: Number new state : 27.20
[11:07:13][D][number:012]: 'inverter battery discharge recovery point in mains mode': Sending state 27.200001
[11:07:13][D][modbus.number:023]: Number new state : 24.80
[11:07:13][D][number:012]: 'inverter battery low voltage protection point in mains mode': Sending state 24.800001
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][modbus.number:023]: Number new state : 24.00
[11:07:13][D][number:012]: 'inverter battery low voltage protection point in off-grid mode': Sending state 24.000000
[11:07:13][D][modbus_controller.select:014]: New select value 3 from payload
[11:07:13][D][select:015]: 'inverter battery charging priority': Sending state Only PV charging is allowed (index 3)
[11:07:13][D][modbus.number:023]: Number new state : 100.00
[11:07:13][D][number:012]: 'inverter maximum charging current': Sending state 100.000000
[11:07:13][D][modbus.number:023]: Number new state : 2.00
[11:07:13][D][number:012]: 'inverter maximum mains charging current': Sending state 2.000000
[11:07:13][D][modbus.number:023]: Number new state : 29.60
[11:07:13][D][number:012]: 'inverter Eq Charging voltage': Sending state 29.600000
[11:07:13][D][modbus.number:023]: Number new state : 30.00
[11:07:13][D][number:012]: 'inverter battery equalization time': Sending state 30.000000
[11:07:13][D][modbus.number:023]: Number new state : 120.00
[11:07:13][D][number:012]: 'inverter equalization Timeout exit': Sending state 120.000000
[11:07:13][D][modbus.number:023]: Number new state : 37.00
[11:07:13][D][number:012]: 'inverter two equalization charging intervals': Sending state 37.000000
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:13][I][jk_bms_ble:330]: Cell info frame (version 3, 300 bytes) received
[11:07:13][D][sensor:094]: 'jk-bms cell voltage 1': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:14][D][sensor:094]: 'jk-bms cell voltage 2': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:14][D][sensor:094]: 'jk-bms cell voltage 3': Sending state 3.31600 V with 3 decimals of accuracy
[11:07:14][D][sensor:094]: 'jk-bms cell voltage 4': Sending state 3.31700 V with 3 decimals of accuracy
[11:07:14][D][sensor:094]: 'jk-bms cell voltage 5': Sending state 3.31600 V with 3 decimals of accuracy
[11:07:14][D][modbus_controller.select:014]: New select value 1 from payload
[11:07:14][D][select:015]: 'inverter turn on mode': Sending state Local turn-on only (index 1)
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][modbus_controller.sensor:025]: Sensor new state: 3500.00
[11:07:14][D][sensor:094]: 'inverter rated power': Sending state 3500.00000 W with 0 decimals of accuracy
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:14][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:15][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:16][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:17][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT
[11:07:18][D][esp32_ble_client:110]: [0] [C8:47:80:1D:83:65] ESP_GATTC_NOTIFY_EVT