diff --git a/keyboards/tumler/reviungdash47/config.h b/keyboards/tumler/reviungdash47/config.h
new file mode 100644
index 00000000000..d63474de992
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/config.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2023 tumler
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define WS2812_DI_PIN D3
+#ifdef WS2812_DI_PIN
+ #define RGBLED_NUM 11
+ #define RGBLIGHT_HUE_STEP 16
+ #define RGBLIGHT_SAT_STEP 16
+ #define RGBLIGHT_VAL_STEP 16
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/tumler/reviungdash47/info.json b/keyboards/tumler/reviungdash47/info.json
new file mode 100644
index 00000000000..40a3959b63a
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/info.json
@@ -0,0 +1,141 @@
+{
+ "keyboard_name": "reviungdash47",
+ "manufacturer": "tumler",
+ "url": "",
+ "maintainer": "tumler",
+ "usb": {
+ "vid": "0xFEED",
+ "pid": "0x6061",
+ "device_version": "0.0.1"
+ },
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "layout_aliases": {
+ "LAYOUT": "LAYOUT_reviungdash_double"
+ },
+ "layouts": {
+ "LAYOUT_reviungdash_single": {
+ "layout": [
+ {"matrix": [0, 0], "x":0, "y":0.54},
+ {"matrix": [0, 1], "x":1, "y":0.36},
+ {"matrix": [0, 2], "x":2, "y":0.18},
+ {"matrix": [0, 3], "x":3, "y":0},
+ {"matrix": [0, 4], "x":4, "y":0.18},
+ {"matrix": [0, 5], "x":5, "y":0.36},
+
+ {"matrix": [3, 0], "x":7, "y":0.36},
+ {"matrix": [3, 1], "x":8, "y":0.18},
+ {"matrix": [3, 2], "x":9, "y":0},
+ {"matrix": [3, 3], "x":10, "y":0.18},
+ {"matrix": [3, 4], "x":11, "y":0.36},
+ {"matrix": [3, 5], "x":12, "y":0.54},
+
+ {"matrix": [1, 0], "x":0, "y":1.54},
+ {"matrix": [1, 1], "x":1, "y":1.36},
+ {"matrix": [1, 2], "x":2, "y":1.18},
+ {"matrix": [1, 3], "x":3, "y":1},
+ {"matrix": [1, 4], "x":4, "y":1.18},
+ {"matrix": [1, 5], "x":5, "y":1.36},
+
+ {"matrix": [4, 0], "x":7, "y":1.36},
+ {"matrix": [4, 1], "x":8, "y":1.18},
+ {"matrix": [4, 2], "x":9, "y":1},
+ {"matrix": [4, 3], "x":10, "y":1.18},
+ {"matrix": [4, 4], "x":11, "y":1.36},
+ {"matrix": [4, 5], "x":12, "y":1.54},
+
+ {"matrix": [2, 0], "x":0, "y":2.54},
+ {"matrix": [2, 1], "x":1, "y":2.36},
+ {"matrix": [2, 2], "x":2, "y":2.18},
+ {"matrix": [2, 3], "x":3, "y":2},
+ {"matrix": [2, 4], "x":4, "y":2.18},
+ {"matrix": [2, 5], "x":5, "y":2.36},
+
+ {"matrix": [5, 0], "x":7, "y":2.36},
+ {"matrix": [5, 1], "x":8, "y":2.18},
+ {"matrix": [5, 2], "x":9, "y":2},
+ {"matrix": [5, 3], "x":10, "y":2.18},
+ {"matrix": [5, 4], "x":11, "y":2.36},
+ {"matrix": [5, 5], "x":12, "y":2.54},
+
+ {"matrix": [7, 0], "x":0, "y":3.54},
+ {"matrix": [7, 1], "x":1, "y":3.54},
+ {"matrix": [7, 2], "x":2, "y":3.54},
+ {"matrix": [7, 3], "x":3, "y":3.54},
+ {"matrix": [7, 4], "x":4, "y":3.54},
+
+ {"matrix": [6, 0], "x":5.375, "y":3.54, "w":2.25},
+ {"matrix": [6, 1], "x":8, "y":3.54},
+ {"matrix": [6, 2], "x":9, "y":3.54},
+ {"matrix": [6, 3], "x":10, "y":3.54},
+ {"matrix": [6, 4], "x":11, "y":3.54},
+ {"matrix": [6, 5], "x":12, "y":3.54}
+ ]
+ },
+ "LAYOUT_reviungdash_double": {
+ "layout": [
+ {"matrix": [0, 0], "x":0, "y":0.54},
+ {"matrix": [0, 1], "x":1, "y":0.36},
+ {"matrix": [0, 2], "x":2, "y":0.18},
+ {"matrix": [0, 3], "x":3, "y":0},
+ {"matrix": [0, 4], "x":4, "y":0.18},
+ {"matrix": [0, 5], "x":5, "y":0.36},
+
+ {"matrix": [3, 0], "x":7, "y":0.36},
+ {"matrix": [3, 1], "x":8, "y":0.18},
+ {"matrix": [3, 2], "x":9, "y":0},
+ {"matrix": [3, 3], "x":10, "y":0.18},
+ {"matrix": [3, 4], "x":11, "y":0.36},
+ {"matrix": [3, 5], "x":12, "y":0.54},
+
+ {"matrix": [1, 0], "x":0, "y":1.54},
+ {"matrix": [1, 1], "x":1, "y":1.36},
+ {"matrix": [1, 2], "x":2, "y":1.18},
+ {"matrix": [1, 3], "x":3, "y":1},
+ {"matrix": [1, 4], "x":4, "y":1.18},
+ {"matrix": [1, 5], "x":5, "y":1.36},
+
+ {"matrix": [4, 0], "x":7, "y":1.36},
+ {"matrix": [4, 1], "x":8, "y":1.18},
+ {"matrix": [4, 2], "x":9, "y":1},
+ {"matrix": [4, 3], "x":10, "y":1.18},
+ {"matrix": [4, 4], "x":11, "y":1.36},
+ {"matrix": [4, 5], "x":12, "y":1.54},
+
+ {"matrix": [2, 0], "x":0, "y":2.54},
+ {"matrix": [2, 1], "x":1, "y":2.36},
+ {"matrix": [2, 2], "x":2, "y":2.18},
+ {"matrix": [2, 3], "x":3, "y":2},
+ {"matrix": [2, 4], "x":4, "y":2.18},
+ {"matrix": [2, 5], "x":5, "y":2.36},
+
+ {"matrix": [5, 0], "x":7, "y":2.36},
+ {"matrix": [5, 1], "x":8, "y":2.18},
+ {"matrix": [5, 2], "x":9, "y":2},
+ {"matrix": [5, 3], "x":10, "y":2.18},
+ {"matrix": [5, 4], "x":11, "y":2.36},
+ {"matrix": [5, 5], "x":12, "y":2.54},
+
+ {"matrix": [7, 0], "x":0, "y":3.54},
+ {"matrix": [7, 1], "x":1, "y":3.54},
+ {"matrix": [7, 2], "x":2, "y":3.54},
+ {"matrix": [7, 3], "x":3, "y":3.54},
+ {"matrix": [7, 4], "x":4, "y":3.54},
+ {"matrix": [7, 5], "x":5, "y":3.54},
+
+ {"matrix": [6, 0], "x":7, "y":3.54},
+ {"matrix": [6, 1], "x":8, "y":3.54},
+ {"matrix": [6, 2], "x":9, "y":3.54},
+ {"matrix": [6, 3], "x":10, "y":3.54},
+ {"matrix": [6, 4], "x":11, "y":3.54},
+ {"matrix": [6, 5], "x":12, "y":3.54}
+ ]
+ }
+
+ }
+}
diff --git a/keyboards/tumler/reviungdash47/keymaps/default/keymap.c b/keyboards/tumler/reviungdash47/keymaps/default/keymap.c
new file mode 100644
index 00000000000..4e13be6ccad
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/default/keymap.c
@@ -0,0 +1,59 @@
+/* Copyright 2023 tumler
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_ENT, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
+ ),
+ [_LOWER] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_GRV, KC_TILD,
+ _______, KC_ESC, KC_LGUI, KC_LALT, KC_CAPS, KC_DQUO, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_PSCR, RSFT_T(KC_SPC),
+ _______, _______, _______, _______, _______, KC_SPC, KC_ENT, MO(3), _______, _______, _______, _______
+ ),
+ [_RAISE] = LAYOUT(
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
+ _______, KC_ESC, KC_RGUI, KC_RALT, KC_CAPS, KC_QUOT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ _______, _______, _______, _______, MO(3), KC_SPC, KC_ENT, _______, _______, _______, _______, _______
+ ),
+ [_ADJUST] = LAYOUT(
+ RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, _______, RGB_TOG, _______, _______, _______, _______, _______, KC_VOLU,
+ RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, KC_VOLD,
+ _______, _______, _______, _______, _______, _______, QK_BOOT, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, KC_SPC, KC_ENT, _______, _______, _______, _______, _______
+ )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
diff --git a/keyboards/tumler/reviungdash47/keymaps/default/readme.md b/keyboards/tumler/reviungdash47/keymaps/default/readme.md
new file mode 100644
index 00000000000..3dead4dae34
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for reviungdash
diff --git a/keyboards/tumler/reviungdash47/keymaps/vial/config.h b/keyboards/tumler/reviungdash47/keymaps/vial/config.h
new file mode 100644
index 00000000000..082994ae08f
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/vial/config.h
@@ -0,0 +1,8 @@
+#pragma once
+
+#define VIAL_KEYBOARD_UID {0xE8, 0xB1, 0x52, 0x65, 0x1D, 0x03, 0x1B, 0x19}
+
+// Unlock with top left key (row 0, column 0) and
+// top right key (row 3, column 5):
+#define VIAL_UNLOCK_COMBO_ROWS { 0, 3 }
+#define VIAL_UNLOCK_COMBO_COLS { 0, 5 }
diff --git a/keyboards/tumler/reviungdash47/keymaps/vial/keymap.json b/keyboards/tumler/reviungdash47/keymaps/vial/keymap.json
new file mode 100644
index 00000000000..ed3c12edde8
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/vial/keymap.json
@@ -0,0 +1,31 @@
+{
+ "keyboard": "tumler/reviungdash47",
+ "keymap": "default",
+ "layout": "LAYOUT_reviungdash_double",
+ "layers": [
+ [
+ "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_DEL",
+ "KC_LCTL", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT",
+ "KC_LSFT", "KC_Z", "KC_X", "KC_C", "KC_V", "KC_B", "KC_N", "KC_M", "KC_COMM", "KC_DOT", "KC_SLSH", "KC_RSFT",
+ "KC_LCTL", "KC_LGUI", "KC_LALT", "KC_LGUI", "MO(1)", "KC_SPC", "KC_ENT", "MO(2)", "KC_LEFT", "KC_DOWN", "KC_UP", "KC_RIGHT"
+ ],
+ [
+ "_______", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_DEL",
+ "_______", "KC_UNDS", "KC_PLUS", "KC_LCBR", "KC_RCBR", "KC_PIPE", "KC_LEFT", "KC_DOWN", "KC_UP", "KC_RGHT", "KC_GRV", "KC_TILD",
+ "_______", "KC_ESC", "KC_LGUI", "KC_LALT", "KC_CAPS", "KC_DQUO", "KC_HOME", "KC_END", "KC_PGUP", "KC_PGDN", "KC_PSCR", "RSFT_T(KC_SPC)",
+ "_______", "_______", "_______", "_______", "_______", "KC_SPC", "KC_ENT", "MO(3)", "_______", "_______", "_______", "_______"
+ ],
+ [
+ "_______", "KC_EXLM", "KC_AT", "KC_HASH", "KC_DLR", "KC_PERC", "KC_CIRC", "KC_AMPR", "KC_ASTR", "KC_LPRN", "KC_RPRN", "KC_DEL",
+ "_______", "KC_MINS", "KC_EQL", "KC_LBRC", "KC_RBRC", "KC_BSLS", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6",
+ "_______", "KC_ESC", "KC_RGUI", "KC_RALT", "KC_CAPS", "KC_QUOT", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12",
+ "_______", "_______", "_______", "_______", "MO(3)", "KC_SPC", "KC_ENT", "_______", "_______", "_______", "_______", "_______"
+ ],
+ [
+ "RGB_VAI", "RGB_SAI", "RGB_HUI", "RGB_MOD", "_______", "RGB_TOG", "_______", "_______", "_______", "_______", "_______", "KC_VOLU",
+ "RGB_VAD", "RGB_SAD", "RGB_HUD", "RGB_RMOD","_______", "_______", "_______", "_______", "_______", "_______", "_______", "KC_VOLD",
+ "_______", "_______", "_______", "_______", "_______", "_______", "QK_BOOT", "_______", "_______", "_______", "_______", "_______",
+ "_______", "_______", "_______", "_______", "_______", "KC_SPC", "KC_ENT", "_______", "_______", "_______", "_______", "_______"
+ ]
+ ]
+}
diff --git a/keyboards/tumler/reviungdash47/keymaps/vial/readme.md b/keyboards/tumler/reviungdash47/keymaps/vial/readme.md
new file mode 100644
index 00000000000..451918781c0
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/vial/readme.md
@@ -0,0 +1,13 @@
+# Vial Keymap for ReviungDash47
+
+The REVIUNGDASH47 is a 47-key column staggered keyboard.
+
+* Keyboard Maintainer: [tumler](https://github.com/tumler)
+* Hardware Supported: REVIUNGDASH47 PCBs, Pro Micro / RP2040 supported
+* Hardware Availability: [PCB & Case Data](https://github.com/tumler/reviungdash/tree/master/reviungdash47)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviungdash47:vial
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tumler/reviungdash47/keymaps/vial/rules.mk b/keyboards/tumler/reviungdash47/keymaps/vial/rules.mk
new file mode 100644
index 00000000000..a35c5f03fce
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/vial/rules.mk
@@ -0,0 +1,13 @@
+VIA_ENABLE = yes
+VIAL_ENABLE = yes
+
+CONSOLE_ENABLE = no
+LTO_ENABLE = yes
+
+ifndef CONVERT_TO
+ # Disable QMK Settings when using a ProMicro to reduce size:
+ QMK_SETTINGS = no
+else
+ # Enable Mouse Keys when when not using a ProMicro as there will be space:
+ MOUSEKEY_ENABLE = yes
+endif
diff --git a/keyboards/tumler/reviungdash47/keymaps/vial/vial.json b/keyboards/tumler/reviungdash47/keymaps/vial/vial.json
new file mode 100644
index 00000000000..0d9cd44adc0
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/keymaps/vial/vial.json
@@ -0,0 +1,60 @@
+{
+ "name": "reviungdash",
+ "vendorId": "0xFEED",
+ "productId": "0x6061",
+ "lighting": "qmk_rgblight",
+ "customKeycodes":
+ [{"name": "BASE","title": "BASE Layer","shortName": "BASE"},
+ {"name": "LOWER","title": "Lower Layer","shortname": "LOWER"},
+ {"name": "RAISE","title": "Raise Layer","shortName": "RAISE"},
+ {"name": "ADJUST","title": "Adjust Layer","shortName": "ADJUST"}
+ ],
+ "matrix": { "rows": 8, "cols": 6 },
+ "layouts": {
+ "labels": [
+ [
+ "Thumb Keys",
+ "Single 2.25",
+ "Double 1+1 Double"
+ ]
+ ],
+ "keymap": [
+ [{"y":4.2,"x":5.525,"w":2.25},"6,0\n\n\n0,0"],
+ [{"y":4.2,"x":5.525},"7,5\n\n\n0,1",{"w":0.25,"d":true},"\n\n\n0,1",{"x":-0.25},"6,0\n\n\n0,1"],
+ [{"r":2,"rx":10.5,"ry":4.5,"y":-1,"x":-1.375},"6,2"],
+ [{"r":10,"rx":5.425,"ry":4.2,"x":-1.25,"w":1.25},"7,4"],
+ [{"rx":6.75,"ry":0,"y":0.75,"x":-3},"0,3"],
+ [{"y":-0.82,"x":-4},"0,2",{"x":1},"0,4"],
+ [{"y":-0.82,"x":-5},"0,1",{"x":3},"0,5"],
+ [{"y":-0.82,"x":-6},"0,0"],
+ [{"y":-0.54,"x":-3},"1,3"],
+ [{"y":-0.82,"x":-4},"1,2",{"x":1},"1,4"],
+ [{"y":-0.82,"x":-5},"1,1",{"x":3},"1,5"],
+ [{"y":-0.82,"x":-6},"1,0"],
+ [{"y":-0.54,"x":-3},"2,3"],
+ [{"y":-0.82,"x":-4},"2,2",{"x":1},"2,4"],
+ [{"y":-0.82,"x":-5},"2,1",{"x":3},"2,5"],
+ [{"rx":6.8,"y":3.29,"x":-6.05},"2,0"],
+ [{"y":-0.36,"x":-4.05},"7,2"],
+ [{"y":-0.82,"x":-5.05},"7,1"],
+ [{"y":-0.82,"x":-6.05},"7,0"],
+ [{"r":-10,"rx":6.5,"y":0.75,"x":2},"3,2"],
+ [{"y":-0.82,"x":1},"3,1",{"x":1},"3,3"],
+ [{"y":-0.82},"3,0",{"x":3},"3,4"],
+ [{"y":-0.82,"x":5},"3,5"],
+ [{"y":-0.54,"x":2},"4,2"],
+ [{"y":-0.82,"x":1},"4,1",{"x":1},"4,3"],
+ [{"y":-0.82},"4,0",{"x":3},"4,4"],
+ [{"y":-0.82,"x":5},"4,5"],
+ [{"y":-0.54,"x":2},"5,2"],
+ [{"y":-0.82,"x":1},"5,1",{"x":1},"5,3"],
+ [{"y":-0.82},"5,0",{"x":3},"5,4"],
+ [{"y":-0.82,"x":5},"5,5"],
+ [{"y":-0.36,"x":3},"6,3"],
+ [{"y":-0.82,"x":4},"6,4"],
+ [{"y":-0.82,"x":5},"6,5"],
+ [{"rx":7.875,"ry":4.2,"w":1.25},"6,1"],
+ [{"r":-2,"rx":2.75,"ry":4.5,"y":-1,"x":0.375},"7,3"]
+ ]
+ }
+}
diff --git a/keyboards/tumler/reviungdash47/readme.md b/keyboards/tumler/reviungdash47/readme.md
new file mode 100644
index 00000000000..a7df7ea0f88
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/readme.md
@@ -0,0 +1,13 @@
+# ReviungDash47
+
+The REVIUNGDASH47 is a 47-key column staggered keyboard.
+
+* Keyboard Maintainer: [tumler](https://github.com/tumler)
+* Hardware Supported: REVIUNGDASH47 PCBs, Pro Micro / RP2040 supported
+* Hardware Availability: [PCB & Case Data](https://github.com/tumler/reviungdash/tree/master/reviungdash47)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviungdash47:vial
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tumler/reviungdash47/rules.mk b/keyboards/tumler/reviungdash47/rules.mk
new file mode 100644
index 00000000000..01c4e50a8a8
--- /dev/null
+++ b/keyboards/tumler/reviungdash47/rules.mk
@@ -0,0 +1,19 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# BOOTLOADER = caterina
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/tumler/reviungdash52/config.h b/keyboards/tumler/reviungdash52/config.h
new file mode 100644
index 00000000000..fda7a1e54a4
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/config.h
@@ -0,0 +1,30 @@
+/*
+Copyright 2024 tumler
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#define RGBLED_NUM 0
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
diff --git a/keyboards/tumler/reviungdash52/info.json b/keyboards/tumler/reviungdash52/info.json
new file mode 100644
index 00000000000..cb2a4986ebd
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/info.json
@@ -0,0 +1,93 @@
+{
+ "keyboard_name": "reviungdash52",
+ "manufacturer": "tumler",
+ "url": "",
+ "maintainer": "tumler",
+ "usb": {
+ "vid": "0xFEED",
+ "pid": "0x6062",
+ "device_version": "0.0.1"
+ },
+ "matrix_pins_minipro": {
+ "cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D1"]
+ },
+ "matrix_pins": {
+ "cols": ["GP4", "GP5", "GP6", "GP7", "GP8", "GP9"],
+ "rows": ["GP29", "GP28", "GP27", "GP26", "GP22", "GP20", "GP23", "GP21", "GP2"]
+ },
+ "diode_direction": "COL2ROW",
+ "processor": "RP2040",
+ "bootloader": "rp2040",
+ "layout_aliases": {
+ "LAYOUT": "LAYOUT_reviungdash"
+ },
+ "layouts": {
+ "LAYOUT_reviungdash": {
+ "layout": [
+ {"matrix": [0, 0], "x":0, "y":0.54},
+ {"matrix": [0, 1], "x":1, "y":0.36},
+ {"matrix": [0, 2], "x":2, "y":0.18},
+ {"matrix": [0, 3], "x":3, "y":0},
+ {"matrix": [0, 4], "x":4, "y":0.18},
+ {"matrix": [0, 5], "x":5, "y":0.36},
+
+ {"matrix": [3, 0], "x":7, "y":0.36},
+ {"matrix": [3, 1], "x":8, "y":0.18},
+ {"matrix": [3, 2], "x":9, "y":0},
+ {"matrix": [3, 3], "x":10, "y":0.18},
+ {"matrix": [3, 4], "x":11, "y":0.36},
+ {"matrix": [3, 5], "x":12, "y":0.54},
+
+ {"matrix": [1, 0], "x":0, "y":1.54},
+ {"matrix": [1, 1], "x":1, "y":1.36},
+ {"matrix": [1, 2], "x":2, "y":1.18},
+ {"matrix": [1, 3], "x":3, "y":1},
+ {"matrix": [1, 4], "x":4, "y":1.18},
+ {"matrix": [1, 5], "x":5, "y":1.36},
+
+ {"matrix": [4, 0], "x":7, "y":1.36},
+ {"matrix": [4, 1], "x":8, "y":1.18},
+ {"matrix": [4, 2], "x":9, "y":1},
+ {"matrix": [4, 3], "x":10, "y":1.18},
+ {"matrix": [4, 4], "x":11, "y":1.36},
+ {"matrix": [4, 5], "x":12, "y":1.54},
+
+ {"matrix": [2, 0], "x":0, "y":2.54},
+ {"matrix": [2, 1], "x":1, "y":2.36},
+ {"matrix": [2, 2], "x":2, "y":2.18},
+ {"matrix": [2, 3], "x":3, "y":2},
+ {"matrix": [2, 4], "x":4, "y":2.18},
+ {"matrix": [2, 5], "x":5, "y":2.36},
+
+ {"matrix": [5, 0], "x":7, "y":2.36},
+ {"matrix": [5, 1], "x":8, "y":2.18},
+ {"matrix": [5, 2], "x":9, "y":2},
+ {"matrix": [5, 3], "x":10, "y":2.18},
+ {"matrix": [5, 4], "x":11, "y":2.36},
+ {"matrix": [5, 5], "x":12, "y":2.54},
+
+ {"matrix": [7, 0], "x":0, "y":3.54},
+ {"matrix": [7, 1], "x":1, "y":3.54},
+ {"matrix": [7, 2], "x":2, "y":3.54},
+ {"matrix": [7, 3], "x":3, "y":3.54},
+
+ {"matrix": [6, 2], "x":9, "y":3.54},
+ {"matrix": [6, 3], "x":10, "y":3.54},
+ {"matrix": [6, 4], "x":11, "y":3.54},
+ {"matrix": [6, 5], "x":12, "y":3.54},
+
+ {"matrix": [8, 0], "x":0, "y":3.54},
+ {"matrix": [8, 2], "x":2, "y":3.54},
+
+ {"matrix": [7, 4], "x":4, "y":3.54},
+ {"matrix": [7, 5], "x":5, "y":3.54},
+ {"matrix": [8, 1], "x":1, "y":3.54},
+
+ {"matrix": [8, 3], "x":3, "y":3.54},
+ {"matrix": [6, 0], "x":5.375, "y":3.54, "w":2.25},
+ {"matrix": [6, 1], "x":8, "y":3.54}
+ ]
+ }
+ }
+}
diff --git a/keyboards/tumler/reviungdash52/keymaps/default/keymap.c b/keyboards/tumler/reviungdash52/keymaps/default/keymap.c
new file mode 100644
index 00000000000..59f96de1417
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/default/keymap.c
@@ -0,0 +1,69 @@
+/* Copyright 2024 tumler
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+ _BASE,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define ADJUST MO(_ADJUST)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,
+ KC_LALT, KC_BSPC,
+ MO(1), KC_LCTL, KC_SPC, KC_ENT, KC_DEL, MO(2)
+ ),
+
+ [_LOWER] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_GRV, KC_TILD,
+ _______, KC_ESC, KC_LGUI, KC_LALT, KC_CAPS, KC_QUOT, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_PSCR, RSFT_T(KC_SPC),
+ _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,
+ _______, _______,
+ _______, _______, _______, _______, _______, MO(3)
+ ),
+
+ [_RAISE] = LAYOUT(
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
+ _______, KC_ESC, KC_RGUI, KC_RALT, KC_CAPS, KC_QUOT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ _______, _______, _______, _______, _______, _______, _______, _______,
+ KC_DOWN, KC_UP,
+ MO(3), KC_LCTL, KC_LCTL, KC_LCTL, KC_LCTL, _______
+),
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______,
+ _______, _______, _______, _______, _______, _______
+ )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
diff --git a/keyboards/tumler/reviungdash52/keymaps/default/readme.md b/keyboards/tumler/reviungdash52/keymaps/default/readme.md
new file mode 100644
index 00000000000..3dead4dae34
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for reviungdash
diff --git a/keyboards/tumler/reviungdash52/keymaps/vial/config.h b/keyboards/tumler/reviungdash52/keymaps/vial/config.h
new file mode 100644
index 00000000000..86a25eb7541
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/vial/config.h
@@ -0,0 +1,8 @@
+#pragma once
+
+#define VIAL_KEYBOARD_UID {0x69, 0x01, 0x58, 0x30, 0xE7, 0xA6, 0x7D, 0x5D}
+
+// Unlock with top left key (row 0, column 0) and
+// top right key (row 3, column 5):
+#define VIAL_UNLOCK_COMBO_ROWS { 0, 3 }
+#define VIAL_UNLOCK_COMBO_COLS { 0, 5 }
diff --git a/keyboards/tumler/reviungdash52/keymaps/vial/keymap.json b/keyboards/tumler/reviungdash52/keymaps/vial/keymap.json
new file mode 100644
index 00000000000..6fa144854c5
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/vial/keymap.json
@@ -0,0 +1,42 @@
+{
+ "keyboard": "tumler/reviungdash52",
+ "keymap": "default",
+ "layout": "LAYOUT_reviungdash",
+ "layers": [
+ [
+ "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_BSPC",
+ "KC_CAPS", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT",
+ "KC_LSFT", "KC_Z", "KC_X", "KC_C", "KC_V", "KC_B", "KC_N", "KC_M", "KC_COMM", "KC_DOT", "KC_SLSH", "KC_RSFT",
+ "KC_LCTL", "KC_LGUI", "KC_LALT", "KC_LGUI", "KC_LEFT", "KC_DOWN", "KC_UP", "KC_RIGHT",
+ "KC_LALT", "KC_BSPC",
+ "MO(1)", "KC_LCTL", "KC_SPC", "KC_ENT", "KC_DEL", "MO(2)"
+
+ ],
+ [
+ "_______", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_DEL",
+ "_______", "KC_UNDS", "KC_PLUS", "KC_LCBR", "KC_RCBR", "KC_PIPE", "KC_LEFT", "KC_DOWN", "KC_UP", "KC_RIGHT", "KC_GRV", "KC_TILD",
+ "_______", "KC_ESC", "KC_LGUI", "KC_LALT", "KC_CAPS", "KC_QUOT", "KC_HOME", "KC_PGDN", "KC_PGUP", "KC_END", "KC_PSCR", "RSFT_T(KC_SPC)",
+ "_______", "_______", "_______", "_______", "KC_HOME", "KC_PGDN", "KC_PGUP", "KC_END",
+ "_______", "_______",
+ "_______", "_______", "_______", "_______", "_______", "MO(3)"
+
+ ],
+ [
+ "_______", "KC_EXLM", "KC_AT", "KC_HASH", "KC_DLR", "KC_PERC", "KC_CIRC", "KC_AMPR", "KC_ASTR", "KC_LPRN", "KC_RPRN", "KC_DEL",
+ "_______", "KC_MINS", "KC_EQL", "KC_LBRC", "KC_RBRC", "KC_BSLS", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6",
+ "_______", "KC_ESC", "KC_RGUI", "KC_RALT", "KC_CAPS", "KC_QUOT", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12",
+ "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______",
+ "KC_DOWN", "KC_UP",
+ "MO(3)", "KC_LCTL", "KC_LCTL", "KC_LCTL", "KC_LCTL", "_______"
+
+ ],
+ [
+ "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "KC_VOLU",
+ "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "KC_VOLD",
+ "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______",
+ "_______", "_______", "_______", "_______", "_______", "_______", "_______", "_______",
+ "_______", "_______",
+ "_______", "_______", "_______", "_______", "_______", "_______"
+ ]
+ ]
+}
diff --git a/keyboards/tumler/reviungdash52/keymaps/vial/readme.md b/keyboards/tumler/reviungdash52/keymaps/vial/readme.md
new file mode 100644
index 00000000000..a69270f5d73
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/vial/readme.md
@@ -0,0 +1,13 @@
+# Vial Keymap for ReviungDash52
+
+The REVIUNGDASH52 is a 52-key column staggered keyboard.
+
+* Keyboard Maintainer: [tumler](https://github.com/tumler)
+* Hardware Supported: REVIUNGDASH52 PCBs, Pro Micro / RP2040 supported
+* Hardware Availability: [PCB & Case Data](https://github.com/tumler/reviungdash/tree/master/reviungdash52)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviungdash52:vial
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tumler/reviungdash52/keymaps/vial/rules.mk b/keyboards/tumler/reviungdash52/keymaps/vial/rules.mk
new file mode 100644
index 00000000000..a35c5f03fce
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/vial/rules.mk
@@ -0,0 +1,13 @@
+VIA_ENABLE = yes
+VIAL_ENABLE = yes
+
+CONSOLE_ENABLE = no
+LTO_ENABLE = yes
+
+ifndef CONVERT_TO
+ # Disable QMK Settings when using a ProMicro to reduce size:
+ QMK_SETTINGS = no
+else
+ # Enable Mouse Keys when when not using a ProMicro as there will be space:
+ MOUSEKEY_ENABLE = yes
+endif
diff --git a/keyboards/tumler/reviungdash52/keymaps/vial/vial.json b/keyboards/tumler/reviungdash52/keymaps/vial/vial.json
new file mode 100644
index 00000000000..0ecfcd93a55
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/keymaps/vial/vial.json
@@ -0,0 +1,46 @@
+{
+ "name": "reviungdash52",
+ "vendorId": "0xFEED",
+ "productId": "0x6062",
+ "matrix": { "rows": 9, "cols": 6 },
+ "layouts": {
+ "keymap": [
+ [{"rx":2.5,"ry":4.5,"y":-1,"x":0.45},"7,3"],
+ [{"rx":10.5,"y":-1,"x":0.31},"6,2"],
+ [{"r":13,"rx":6.75,"ry":0,"y":0.75,"x":-3},"0,3"],
+ [{"y":-0.82,"x":-4},"0,2",{"x":1},"0,4"],
+ [{"y":-0.82,"x":-5},"0,1",{"x":3},"0,5"],
+ [{"y":-0.82,"x":-6},"0,0"],
+ [{"y":-0.54,"x":-3},"1,3"],
+ [{"y":-0.82,"x":-4},"1,2",{"x":1},"1,4"],
+ [{"y":-0.82,"x":-5},"1,1",{"x":3},"1,5"],
+ [{"y":-0.82,"x":-6},"1,0"],
+ [{"y":-0.54,"x":-3},"2,3"],
+ [{"y":-0.82,"x":-4},"2,2",{"x":1},"2,4"],
+ [{"y":-0.82,"x":-5},"2,1",{"x":3},"2,5"],
+ [{"rx":6.8,"y":3.29,"x":-6.05},"2,0"],
+ [{"y":-0.36,"x":-4.05},"7,2"],
+ [{"y":-0.82,"x":-5.05},"7,1"],
+ [{"y":-0.82,"x":-6.05},"7,0"],
+ [{"r":46,"rx":7.8,"ry":3.5,"y":1.3,"x":-1},"8,0"],
+ [{"x":-2},"7,4","7,5","8,1"],
+ [{"r":-46,"rx":6.95,"y":1.3},"8,2"],
+ [{"x":-1},"8,3","6,0","6,1"],
+ [{"r":-13,"rx":8,"ry":0,"y":0.75,"x":2},"3,2"],
+ [{"y":-0.82,"x":1},"3,1",{"x":1},"3,3"],
+ [{"y":-0.82},"3,0",{"x":3},"3,4"],
+ [{"y":-0.82,"x":5},"3,5"],
+ [{"y":-0.54,"x":2},"4,2"],
+ [{"y":-0.82,"x":1},"4,1",{"x":1},"4,3"],
+ [{"y":-0.82},"4,0",{"x":3},"4,4"],
+ [{"y":-0.82,"x":5},"4,5"],
+ [{"y":-0.54,"x":2},"5,2"],
+ [{"y":-0.82,"x":1},"5,1",{"x":1},"5,3"],
+ [{"y":-0.82},"5,0",{"x":3},"5,4"],
+ [{"y":-0.82,"x":5},"5,5"],
+ [{"y":-0.36,"x":3},"6,3"],
+ [{"y":-0.82,"x":4},"6,4"],
+ [{"y":-0.82,"x":5},"6,5"]
+ ]
+ }
+}
diff --git a/keyboards/tumler/reviungdash52/readme.md b/keyboards/tumler/reviungdash52/readme.md
new file mode 100644
index 00000000000..c165bca0d5b
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/readme.md
@@ -0,0 +1,13 @@
+# ReviungDash52
+
+The REVIUNGDASH52 is a 52-key column staggered keyboard.
+
+* Keyboard Maintainer: [tumler](https://github.com/tumler)
+* Hardware Supported: REVIUNGDASH52 PCBs, Pro Micro / RP2040 supported
+* Hardware Availability: [PCB & Case Data](https://github.com/tumler/reviungdash/tree/master/reviungdash52)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make reviungdash52:vial
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/tumler/reviungdash52/rules.mk b/keyboards/tumler/reviungdash52/rules.mk
new file mode 100644
index 00000000000..50006820361
--- /dev/null
+++ b/keyboards/tumler/reviungdash52/rules.mk
@@ -0,0 +1,19 @@
+# MCU name
+# MCU = RP2040
+
+# Bootloader selection
+# BOOTLOADER = caterina
+# BOOTLOADER = rp2040
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output