diff --git a/src/nodes/config-client.html b/src/nodes/config-client.html
index 1b0bdec..a62f474 100644
--- a/src/nodes/config-client.html
+++ b/src/nodes/config-client.html
@@ -923,6 +923,75 @@ <h3>Battery</h3>
 </dl>
 </script>
 
+<script type="text/x-red" data-help-name="victron-input-dcdc">
+<h3>Details</h3>
+<p>The <strong>input nodes</strong> have two selectable inputs: the devices select and measurement select. The available options are dynamically updated based on the data that is actually available on the Venus device.</p> <ul> <li><em>Device select</em> - lists all available devices</li> <li><em>Measurement select</em> - lists all available device-specific measurements</li> <li><em>Node label input field</em> - sets a custom label for the node</li> </ul> <p>The measurement unit type is shown in the measurement label in brackets, e.g. Battery voltage (V). In case the data type is enumerated, an approppriate enum legend is shown below the selected option.</p>
+<p>If the data type is <em>float</em>, a dropdown for rounding the output appears.</p>
+<p>By default the node outputs its value every five seconds. If the <em>only changes</em> is checked, the node will only output on value changes.</p>
+<p>This node allows for monitoring the state of a Smart BuckBoost DC-DC charger.</p>
+<h3>Dcdc</h3>
+<dl class="message-properties">
+  <dt class="optional">/Dc/0/Current (A DC)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/Dc/0/Current</b>
+</dd>
+  <dt class="optional">/Dc/0/Temperature (Degrees celsius)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/Dc/0/Temperature</b>
+</dd>
+  <dt class="optional">/Dc/0/Voltage (V DC)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/Dc/0/Voltage</b>
+</dd>
+  <dt class="optional">/Dc/In/V (V DC)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/Dc/In/V</b>
+</dd>
+  <dt class="optional">/Dc/In/P (W)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/Dc/In/P</b>
+</dd>
+  <dt class="optional">/ErrorCode<span class="property-type">enum</dt>
+  <dd>Dbus path: <b>/ErrorCode</b>
+<ul>
+  <li>0 - No error</li>
+  <li>1 - Battery temperature too high</li>
+  <li>2 - Battery voltage too high</li>
+  <li>3 - Battery temperature sensor miswired (+)</li>
+  <li>4 - Battery temperature sensor miswired (-)</li>
+  <li>5 - Battery temperature sensor disconnected</li>
+  <li>6 - Battery voltage sense miswired (+)</li>
+  <li>7 - Battery voltage sense miswired (-)</li>
+  <li>8 - Battery voltage sense disconnected</li>
+  <li>9 - Battery voltage wire losses too high</li>
+  <li>17 - Charger temperature too high</li>
+  <li>18 - Charger over-current</li>
+  <li>19 - Charger current polarity reversed</li>
+  <li>20 - Bulk time limit reached</li>
+  <li>22 - Charger temperature sensor miswired</li>
+  <li>23 - Charger temperature sensor disconnected</li>
+  <li>34 - Input current too high</li>
+</ul>
+</dd>
+  <dt class="optional">/FirmwareVersion<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/FirmwareVersion</b>
+</dd>
+  <dt class="optional">/History/Cumulative/User/ChargedAh (Ah)<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/History/Cumulative/User/ChargedAh</b>
+</dd>
+  <dt class="optional">/ProductId<span class="property-type">float</dt>
+  <dd>Dbus path: <b>/ProductId</b>
+</dd>
+  <dt class="optional">/State<span class="property-type">enum</dt>
+  <dd>Dbus path: <b>/State</b>
+<ul>
+  <li>0 - Off</li>
+  <li>2 - Fault</li>
+  <li>3 - Bulk</li>
+  <li>4 - Absorption</li>
+  <li>5 - Float</li>
+  <li>6 - Storage</li>
+  <li>7 - Equalize</li>
+</ul>
+</dd>
+</dl>
+</script>
+
 <script type="text/x-red" data-help-name="victron-input-dcload">
 <h3>Details</h3>
 <p>The <strong>input nodes</strong> have two selectable inputs: the devices select and measurement select. The available options are dynamically updated based on the data that is actually available on the Venus device.</p> <ul> <li><em>Device select</em> - lists all available devices</li> <li><em>Measurement select</em> - lists all available device-specific measurements</li> <li><em>Node label input field</em> - sets a custom label for the node</li> </ul> <p>The measurement unit type is shown in the measurement label in brackets, e.g. Battery voltage (V). In case the data type is enumerated, an approppriate enum legend is shown below the selected option.</p>
@@ -3774,6 +3843,13 @@ <h3>Vebus</h3>
 </dd>
   <dt class="optional">Input voltage phase 3 (VAC)<span class="property-type">float</dt>
   <dd>Dbus path: <b>/Ac/ActiveIn/L3/V</b>
+</dd>
+  <dt class="optional">Select Remote Generator<span class="property-type">enum</dt>
+  <dd>Dbus path: <b>/Ac/Control/RemoteGeneratorSelected</b>
+<ul>
+  <li>0 - Generator not selected</li>
+  <li>1 - Generator selected</li>
+</ul>
 </dd>
   <dt class="optional">Input 1 current limit (A)<span class="property-type">float</dt>
   <dd>Dbus path: <b>/Ac/In/1/CurrentLimit</b>
@@ -4269,6 +4345,22 @@ <h3>Charger</h3>
 </dl>
 </script>
 
+<script type="text/x-red" data-help-name="victron-output-dcdc">
+<h3>Details</h3>
+<p><strong>Output nodes</strong> have the same options available as input nodes, but the selectable measurement only lists writable services. Additionally, the user can set an initial value to the service, which is sent whenever the flow is deployed.</p> <ul> <li><em>Device select</em> - lists all available devices</li> <li><em>Measurement select</em> - lists all available device-specific measurements</li> <li><em>Initial value input field</em> - lists all available device-specific measurements</li> <li><em>Node label input field</em> - sets a custom label for the node</li> </ul> <p>All output nodes should have the control value set in its incoming messages <code>msg.payload</code> property.</p> 
+<p>This node allows for controlling the Smart BuckBoost DC-DC chargers.</p>
+<h3>Dcdc</h3>
+<dl class="message-properties">
+  <dt class="optional">/Mode<span class="property-type">enum</dt>
+  <dd>Dbus path: <b>/Mode</b>
+<ul>
+  <li>1 - On</li>
+  <li>4 - Off</li>
+</ul>
+</dd>
+</dl>
+</script>
+
 <script type="text/x-red" data-help-name="victron-output-ess">
 <h3>Details</h3>
 <p><strong>Output nodes</strong> have the same options available as input nodes, but the selectable measurement only lists writable services. Additionally, the user can set an initial value to the service, which is sent whenever the flow is deployed.</p> <ul> <li><em>Device select</em> - lists all available devices</li> <li><em>Measurement select</em> - lists all available device-specific measurements</li> <li><em>Initial value input field</em> - lists all available device-specific measurements</li> <li><em>Node label input field</em> - sets a custom label for the node</li> </ul> <p>All output nodes should have the control value set in its incoming messages <code>msg.payload</code> property.</p> 
diff --git a/src/nodes/victron-nodes.html b/src/nodes/victron-nodes.html
index 081c5b9..f799fdc 100644
--- a/src/nodes/victron-nodes.html
+++ b/src/nodes/victron-nodes.html
@@ -387,6 +387,7 @@
     registerInputNode('victron-input-acload', 'AC Load', 'input-acload');
     registerInputNode('victron-input-alternator', 'Alternator', 'input-alternator');
     registerInputNode('victron-input-battery', 'Battery Monitor', 'input-battery');
+    registerInputNode('victron-input-dcdc', 'DC-DC', 'input-dcdc');
     registerInputNode('victron-input-dcload', 'DC Load', 'input-dcload');
     registerInputNode('victron-input-dcsource', 'DC Source', 'input-dcsource');
     registerInputNode('victron-input-dcsystem', 'DC System', 'input-dcsystem');
diff --git a/src/nodes/victron-nodes.js b/src/nodes/victron-nodes.js
index a491184..ac6c425 100644
--- a/src/nodes/victron-nodes.js
+++ b/src/nodes/victron-nodes.js
@@ -151,6 +151,7 @@ module.exports = function (RED) {
   RED.nodes.registerType('victron-input-alternator', BaseInputNode)
   RED.nodes.registerType('victron-input-battery', BaseInputNode)
   RED.nodes.registerType('victron-input-custom', BaseInputNode)
+  RED.nodes.registerType('victron-input-dcdc', BaseInputNode)
   RED.nodes.registerType('victron-input-dcload', BaseInputNode)
   RED.nodes.registerType('victron-input-dcsource', BaseInputNode)
   RED.nodes.registerType('victron-input-dcsystem', BaseInputNode)
diff --git a/src/services/services.json b/src/services/services.json
index 3d2b9ea..e58b940 100644
--- a/src/services/services.json
+++ b/src/services/services.json
@@ -1048,6 +1048,89 @@
       }
     ]
   },
+  "input-dcdc": {
+    "help": "<p>This node allows for monitoring the state of a Smart BuckBoost DC-DC charger.</p>",
+    "dcdc": [
+      {
+        "path": "/Dc/0/Current",
+        "type": "float",
+        "name": "/Dc/0/Current (A DC)"
+      },
+      {
+        "path": "/Dc/0/Temperature",
+        "type": "float",
+        "name": "/Dc/0/Temperature (Degrees celsius)"
+      },
+      {
+        "path": "/Dc/0/Voltage",
+        "type": "float",
+        "name": "/Dc/0/Voltage (V DC)"
+      },
+      {
+        "path": "/Dc/In/V",
+        "type": "float",
+        "name": "/Dc/In/V (V DC)"
+      },
+      {
+        "path": "/Dc/In/P",
+        "type": "float",
+        "name": "/Dc/In/P (W)"
+      },
+      {
+        "path": "/ErrorCode",
+        "type": "enum",
+        "name": "/ErrorCode",
+        "enum": {
+          "0": "No error",
+          "1": "Battery temperature too high",
+          "2": "Battery voltage too high",
+          "3": "Battery temperature sensor miswired (+)",
+          "4": "Battery temperature sensor miswired (-)",
+          "5": "Battery temperature sensor disconnected",
+          "6": "Battery voltage sense miswired (+)",
+          "7": "Battery voltage sense miswired (-)",
+          "8": "Battery voltage sense disconnected",
+          "9": "Battery voltage wire losses too high",
+          "17": "Charger temperature too high",
+          "18": "Charger over-current",
+          "19": "Charger current polarity reversed",
+          "20": "Bulk time limit reached",
+          "22": "Charger temperature sensor miswired",
+          "23": "Charger temperature sensor disconnected",
+          "34": "Input current too high"
+        }
+      },
+      {
+        "path": "/FirmwareVersion",
+        "type": "float",
+        "name": "/FirmwareVersion"
+      },
+      {
+        "path": "/History/Cumulative/User/ChargedAh",
+        "type": "float",
+        "name": "/History/Cumulative/User/ChargedAh (Ah)"
+      },
+      {
+        "path": "/ProductId",
+        "type": "float",
+        "name": "/ProductId"
+      },
+      {
+        "path": "/State",
+        "type": "enum",
+        "name": "/State",
+        "enum": {
+          "0": "Off",
+          "2": "Fault",
+          "3": "Bulk",
+          "4": "Absorption",
+          "5": "Float",
+          "6": "Storage",
+          "7": "Equalize"
+        }
+      }
+    ]
+  },
   "input-dcload": {
     "help": "<p>This node allows for monitoring the state of BMVs configured in Monitor Mode and DC meter type is a load.</p>",
     "dcload": [
@@ -4787,6 +4870,15 @@
         "type": "float",
         "name": "Input voltage phase 3 (VAC)"
       },
+      {
+        "path": "/Ac/Control/RemoteGeneratorSelected",
+        "type": "enum",
+        "name": "Select Remote Generator",
+        "enum": {
+          "0": "Generator not selected",
+          "1": "Generator selected"
+        }
+      },
       {
         "path": "/Ac/In/1/CurrentLimit",
         "type": "float",
@@ -5420,6 +5512,21 @@
       }
     ]
   },
+  "output-dcdc": {
+    "help": "<p>This node allows for controlling the Smart BuckBoost DC-DC chargers.</p>",
+    "dcdc": [
+      {
+        "path": "/Mode",
+        "type": "enum",
+        "name": "/Mode",
+        "enum": {
+          "1": "On",
+          "4": "Off"
+        },
+        "writable": true
+      }
+    ]
+  },
   "output-ess": {
     "help": "<p>This node allows for controlling the Energy Storage System (ESS).</p>",
     "vebus": [
diff --git a/src/services/victron-system.js b/src/services/victron-system.js
index f45cccf..0523c06 100644
--- a/src/services/victron-system.js
+++ b/src/services/victron-system.js
@@ -173,6 +173,7 @@ class SystemConfiguration {
       'input-acload': this.getNodeServices('input-acload'),
       'input-alternator': this.getNodeServices('input-alternator'),
       'input-battery': this.getNodeServices('input-battery'),
+      'input-dcdc': this.getNodeServices('input-dcdc'),
       'input-dcload': this.getNodeServices('input-dcload'),
       'input-dcsource': this.getNodeServices('input-dcsource'),
       'input-dcsystem': this.getNodeServices('input-dcsystem'),