VuiCash is a decentralized blockchain project built on Bitcoin's UTXO model, with support for Ethereum Virtual Machine based smart contracts, and secured by a proof of stake consensus model. It achieves this through the revolutionary Account Abstraction Layer which allows the EVM to communicate with VuiCash's Bitcoin-like UTXO blockchain. For more general information about VuiCash as well as links to join our community, go to https://vuicash.org

Welcome to the VuiCash Ignition Main Network. This is the main network where the tokens hold value and should be guarded very carefully. If you are testing the network, or developing unstable software on VuiCash, we highly recommend using either testnet or regtest mode.

The major features of the VuiCash network include:

1. Compatibility with the Ethereum Virtual Machine, which allows for compatibility with most existing Solidity based smart contracts. No special solidity compiler is required to deploy your smart contract to VuiCash.
2. A Proof of Stake consensus system which is optimized for VuiCash's contract model. Any user can stake and help to secure the network. There is no voting, master nodes, or minimum amount required. There have been transactions as small as 2 VuiCash that have created blocks in the past. Staking from smart contracts is under development.
3. The Decentralized Governance Protocol is completely implemented and functional, which allows certain network parameters to be modified without a fork or other network disruption. This currently controls parameters like block size, gas prices, etc.
4. Uses the UTXO transaction model and is compatible with Bitcoin, allowing for existing tooling and workflows to be used with VuiCash. This allows for the infamous SPV protocol to be used which is ideal for light wallets on mobile phones and IoT devices.

Note: VuiCash Core is considered beta software. We make no warranties or guarantees of its security or stability.

These are some resources that might be helpful in understanding VuiCash.

Basic usage resources:

• User guide
• VuiCash-Qt Wallet Tutorial
• VuiCash staking tutorial
• VuiCash tutorial on Raspberry Pi
• Running VuiCash on Amazon AWS using VuiCash AMI
• Encrypting and unlocking wallet
• Testnet guide
• Block explorer, Older explorer

Development resources:

• VuiCash Book - A Developer's Guide To VUI
• VuiCash contract usage
• Deploying a custom token to VuiCash
• VuiCashJS document
• Smart contract ICO example
• Early example faucet contract

General Info about VuiCash:

• CIRCLERESEARCH VuiCash Primer
• VuiCash's PoS vs CASPER
• Technical article explaining VuiCash's PoS model in depth

• Smart contract deployment tool
  • https://github.com/vuicash/solar
• DApp JavaScript Library
  • https://github.com/vuicash/vuicashjs
• A toolkit for building vuicash light wallets
  • https://github.com/vuicash/vuicashjs-wallet
• CORS vuicashd RPC proxy for DApp
  • https://github.com/vuicash/vuicashportal
• Docker images for running vuicash services
  • https://github.com/vuicash/vuicash-docker
• vuicash.info API that powers the block explorer and the VUI Web wallet
  • https://github.com/vuicash/vuicashinfo-api#vuicashinfo-api-documentation

VuiCash Core is our primary mainnet wallet. It implements a full node and is capable of storing, validating, and distributing all history of the VuiCash network. VuiCash Core is considered the reference implementation for the VuiCash network.

VuiCash Core currently implements the following:

• Sending/Receiving VUI coins
• Sending/Receiving QRC20 tokens on the VuiCash network
• Staking and creating blocks for the VuiCash network
• Creating and interacting with smart contracts
• Running a full node for distributing the blockchain to other users
• "Prune" mode, which minimizes disk usage
• Regtest mode, which enables developers to very quickly build their own private VuiCash network for Dapp testing
• Testnet mode, using the public VuiCash Testnet, with faucet available
• Compatibility with the Bitcoin Core set of RPC commands and APIs
• Full SegWit capability with p2sh-segwit (legacy) and bech32 (native) addresses

VuiCash Core uses a full node model, and thus requires downloading the entire blockchain. If you do not need the entire blockchain, and do not intend on developing smart contracts, it may be more ideal to use an alternative wallet such as one of our light wallets that can be synchronized in a matter of seconds.

A browser wallet that supports the Ledger hardware wallet, offline cold wallet, and restoration from mobile wallets.

Web site https://vuicashwallet.org

User documentation https://github.com/vuicash/documents/tree/master/en/VUI-WebWallet-usage

A light wallet that supports the Ledger and Trezor hardware wallets and is based on the well-known Electrum wallet software.

Download: https://github.com/vuicash/vuicash-electrum/releases

These wallets run on mobile devices and synchronize quickly.

Android Download: https://play.google.com/store/apps/details?id=org.vuicash.newwallet

iOS Download: https://github.com/vuicash/vuicash-ios (open source, deprecated)

This light wallet runs in your Chrome browser as a browser extension. This wallet requires a Ledger device to use.

How to install: https://ledger.zendesk.com/hc/en-us/articles/115003776913-How-to-install-and-use-VuiCash-with-Ledger

Make sure to check out these resources as well for more information and to keep up to date with all the latest news about VuiCash. At least 1 developer is always around, so if you're developing on VuiCash and need help, we'd love to welcome you to our community.

• @VuiCash on Twitter https://twitter.com/vuicash
• VuiCash blog https://blog.vuicash.org/
• VuiCash Telegram Group https://t.me/vuicashofficial, other languages available
• VuiCash Discord https://discordapp.com/invite/wRfmkQ9
• /r/VuiCash on Reddit https://www.reddit.com/r/VuiCash/
• VuiCash.org https://vuicash.org
• VuiCash on Facebook https://www.facebook.com/VuiCashOfficial/
• VuiCash Forum https://forum.vuicash.org

• EVM smart contracts cannot receive coins from or send coins to any address type other than pay-to-pubkeyhash (starts with Q) addresses. This is due to a limitation in the EVM
• Contracts are not allowed to create contracts with an initial endowment of coins. The contract must first be created, and then be sent coins in a separate transaction. Humans are also not allowed to create contracts with an initial endowment of coins.
• Although all of the infrastructure is present, VuiCash Core does not currently parse Solidity event data. You must parse this yourself using either searchlogs or -record-log-opcodes features.
• It is not possible to send a contract coins without also executing the contract. This is also the case of Ethereum. This was promised in earlier discussions and technically does work, but due to lack of time for testing this feature was disabled. We hope to reenable this feature with release of the x86 virtual machine in 2020.
• In VuiCash there can be multiple addresses used to create a proof-of-stake block. However, the EVM can only see the first output using the coinbase operation in Solidity (this address is also the one registered for the continuous staker rewards after 500 blocks).

VuiCash uses a tool called Gitian to make reproducible builds that can be verified by anyone. Instructions on setting up a Gitian VM and building VuiCash are provided in Gitan Building

This is a quick start script for compiling VuiCash on Ubuntu

sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev libgmp3-dev
sudo apt-get install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev

# If you want to build the Qt GUI:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler qrencode

git clone https://github.com/vuicash/vuicash --recursive
cd vuicash

# Note autogen will prompt to install some more dependencies if needed
./autogen.sh
./configure 
make -j2

Here is a brief description for compiling VuiCash on CentOS, for more details please refer to the specific document

# Compiling boost manually
sudo yum install python-devel bzip2-devel
git clone https://github.com/boostorg/boost.git
cd boost
git checkout boost-1.66.0
git submodule update --init --recursive
./bootstrap.sh --prefix=/usr --libdir=/usr/lib64
./b2 headers
sudo ./b2 -j4 install

# Installing Dependencies for VuiCash
sudo yum install epel-release
sudo yum install libtool libdb4-cxx-devel openssl-devel libevent-devel gmp-devel

# If you want to build the Qt GUI:
sudo yum install qt5-qttools-devel protobuf-devel qrencode-devel

# Building VuiCash
git clone --recursive https://github.com/vuicash/vuicash.git
cd vuicash
./autogen.sh
./configure
make -j4

The commands in this guide should be executed in a Terminal application. The built-in one is located in /Applications/Utilities/Terminal.app.

Install the Mac OS command line tools:

xcode-select --install

When the popup appears, click Install.

Then install Homebrew.

brew install cmake automake berkeley-db4 libtool boost miniupnpc openssl pkg-config protobuf qt5 libevent imagemagick librsvg qrencode gmp

NOTE: Building with Qt4 is still supported, however, could result in a broken UI. Building with Qt5 is recommended.

1. Clone the vuicash source code and cd into vuicash

    git clone --recursive https://github.com/vuicash/vuicash.git
    cd vuicash
   

2. Build vuicash-core:

   Configure and build the headless vuicash binaries as well as the GUI (if Qt is found).

   You can disable the GUI build by passing --without-gui to configure.

   ./autogen.sh
   ./configure
   make
   

3. It is recommended to build and run the unit tests:

   make check
   

Then you can either run the command-line daemon using src/vuicashd and src/vuicash-cli, or you can run the Qt GUI using src/qt/vuicash-qt

VuiCash is GPLv3 licensed.

The master branch is regularly built and tested, but is not guaranteed to be completely stable. Tags are created regularly to indicate new official, stable release versions of VuiCash.

The contribution workflow is described in CONTRIBUTING.md and useful hints for developers can be found in doc/developer-notes.md.

Testing and code review is the bottleneck for development; we get more pull requests than we can review and test on short notice. Please be patient and help out by testing other people's pull requests, and remember this is a security-critical project where any mistake might cost people lots of money.

Developers are strongly encouraged to write unit tests for new code, and to submit new unit tests for old code. Unit tests can be compiled and run (assuming they weren't disabled in configure) with: make check. Further details on running and extending unit tests can be found in /src/test/README.md.

There are also regression and integration tests, written in Python, that are run automatically on the build server. These tests can be run (if the test dependencies are installed) with: test/functional/test_runner.py

The Travis CI system makes sure that every pull request is built for Windows, Linux, and macOS, and that unit/sanity tests are run automatically.

Changes should be tested by somebody other than the developer who wrote the code. This is especially important for large or high-risk changes. It is useful to add a test plan to the pull request description if testing the changes is not straightforward.