diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 25dc4a0e7e4809..75236f1972d98b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2681,9 +2681,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Run specified binary instead of /init from the ramdisk, used for early userspace startup. See initrd. - reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode - Format: [,[,...]] - See arch/*/kernel/reboot.c or arch/*/kernel/process.c + reboot= [KNL] + Format (x86 or x86_64): + [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \ + [[,]s[mp]#### \ + [[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \ + [[,]f[orce] + Where reboot_mode is one of warm (soft) or cold (hard) or gpio, + reboot_type is one of bios, acpi, kbd, triple, efi, or pci, + reboot_force is either force or not specified, + reboot_cpu is s[mp]#### with #### being the processor + to be used for rebooting. relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index b7fdd864c839f4..d3ca4f6915af74 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -176,16 +176,6 @@ void arch_cpu_idle(void) default_idle(); } -enum reboot_mode reboot_mode = REBOOT_HARD; - -static int __init reboot_setup(char *str) -{ - if ('s' == str[0]) - reboot_mode = REBOOT_SOFT; - return 1; -} -__setup("reboot=", reboot_setup); - /* * Called by kexec, immediately prior to machine_kexec(). * diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c index 93dd035a8c33f3..778ebba808275b 100644 --- a/arch/unicore32/kernel/process.c +++ b/arch/unicore32/kernel/process.c @@ -51,16 +51,6 @@ void arch_cpu_idle(void) local_irq_enable(); } -static enum reboot_mode reboot_mode = REBOOT_HARD; - -int __init reboot_setup(char *str) -{ - if ('s' == str[0]) - reboot_mode = REBOOT_SOFT; - return 1; -} -__setup("reboot=", reboot_setup); - void machine_halt(void) { gpio_set_value(GPO_SOFT_OFF, 0); diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h index 75ce3f47d20412..77a99ac06d0070 100644 --- a/arch/x86/include/asm/emergency-restart.h +++ b/arch/x86/include/asm/emergency-restart.h @@ -1,18 +1,6 @@ #ifndef _ASM_X86_EMERGENCY_RESTART_H #define _ASM_X86_EMERGENCY_RESTART_H -enum reboot_type { - BOOT_TRIPLE = 't', - BOOT_KBD = 'k', - BOOT_BIOS = 'b', - BOOT_ACPI = 'a', - BOOT_EFI = 'e', - BOOT_CF9 = 'p', - BOOT_CF9_COND = 'q', -}; - -extern enum reboot_type reboot_type; - extern void machine_emergency_restart(void); #endif /* _ASM_X86_EMERGENCY_RESTART_H */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 39cc7f7acab3f5..63092afb142e7c 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -36,7 +37,6 @@ #include #include #include -#include #include /* BMC sets a bit this MMR non-zero before sending an NMI */ diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f7703401d6cbde..563ed91e6faa3a 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -36,22 +36,6 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; -static enum reboot_mode reboot_mode; -enum reboot_type reboot_type = BOOT_ACPI; -int reboot_force; - -/* - * This variable is used privately to keep track of whether or not - * reboot_type is still set to its default value (i.e., reboot= hasn't - * been set on the command line). This is needed so that we can - * suppress DMI scanning for reboot quirks. Without it, it's - * impossible to override a faulty reboot quirk without recompiling. - */ -static int reboot_default = 1; - -#ifdef CONFIG_SMP -static int reboot_cpu = -1; -#endif /* * This is set if we need to go through the 'emergency' path. @@ -63,79 +47,6 @@ static int reboot_emergency; /* This is set by the PCI code if either type 1 or type 2 PCI is detected */ bool port_cf9_safe = false; -/* - * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] - * warm Don't set the cold reboot flag - * cold Set the cold reboot flag - * bios Reboot by jumping through the BIOS - * smp Reboot by executing reset on BSP or other CPU - * triple Force a triple fault (init) - * kbd Use the keyboard controller. cold reset (default) - * acpi Use the RESET_REG in the FADT - * efi Use efi reset_system runtime service - * pci Use the so-called "PCI reset register", CF9 - * force Avoid anything that could hang. - */ -static int __init reboot_setup(char *str) -{ - for (;;) { - /* - * Having anything passed on the command line via - * reboot= will cause us to disable DMI checking - * below. - */ - reboot_default = 0; - - switch (*str) { - case 'w': - reboot_mode = REBOOT_WARM; - break; - - case 'c': - reboot_mode = REBOOT_COLD; - break; - -#ifdef CONFIG_SMP - case 's': - if (isdigit(*(str+1))) { - reboot_cpu = (int) (*(str+1) - '0'); - if (isdigit(*(str+2))) - reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); - } - /* - * We will leave sorting out the final value - * when we are ready to reboot, since we might not - * have detected BSP APIC ID or smp_num_cpu - */ - break; -#endif /* CONFIG_SMP */ - - case 'b': - case 'a': - case 'k': - case 't': - case 'e': - case 'p': - reboot_type = *str; - break; - - case 'f': - reboot_force = 1; - break; - } - - str = strchr(str, ','); - if (str) - str++; - else - break; - } - return 1; -} - -__setup("reboot=", reboot_setup); - - /* * Reboot options and system auto-detection code provided by * Dell Inc. so their systems "just work". :-) @@ -616,26 +527,10 @@ void native_machine_shutdown(void) { /* Stop the cpus and apics */ #ifdef CONFIG_SMP - - /* The boot cpu is always logical cpu 0 */ - int reboot_cpu_id = 0; - - /* See if there has been given a command line override */ - if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) && - cpu_online(reboot_cpu)) - reboot_cpu_id = reboot_cpu; - - /* Make certain the cpu I'm about to reboot on is online */ - if (!cpu_online(reboot_cpu_id)) - reboot_cpu_id = smp_processor_id(); - - /* Make certain I only run on the appropriate processor */ - set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id)); - /* - * O.K Now that I'm on the appropriate processor, stop all of the - * others. Also disable the local irq to not receive the per-cpu - * timer interrupt which may trigger scheduler's load balance. + * Stop all of the others. Also disable the local irq to + * not receive the per-cpu timer interrupt which may trigger + * scheduler's load balance. */ local_irq_disable(); stop_other_cpus(); diff --git a/include/linux/reboot.h b/include/linux/reboot.h index 5a5d7f7e81b79f..8e00f9f6f96395 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -17,6 +17,23 @@ enum reboot_mode { REBOOT_SOFT, REBOOT_GPIO, }; +extern enum reboot_mode reboot_mode; + +enum reboot_type { + BOOT_TRIPLE = 't', + BOOT_KBD = 'k', + BOOT_BIOS = 'b', + BOOT_ACPI = 'a', + BOOT_EFI = 'e', + BOOT_CF9 = 'p', + BOOT_CF9_COND = 'q', +}; +extern enum reboot_type reboot_type; + +extern int reboot_default; +extern int reboot_cpu; +extern int reboot_force; + extern int register_reboot_notifier(struct notifier_block *); extern int unregister_reboot_notifier(struct notifier_block *); diff --git a/kernel/reboot.c b/kernel/reboot.c index abb6a048371648..269ed9384cc428 100644 --- a/kernel/reboot.c +++ b/kernel/reboot.c @@ -6,6 +6,7 @@ #define pr_fmt(fmt) "reboot: " fmt +#include #include #include #include @@ -24,6 +25,18 @@ int C_A_D = 1; struct pid *cad_pid; EXPORT_SYMBOL(cad_pid); +#if defined(CONFIG_ARM) || defined(CONFIG_UNICORE32) +#define DEFAULT_REBOOT_MODE = REBOOT_HARD +#else +#define DEFAULT_REBOOT_MODE +#endif +enum reboot_mode reboot_mode DEFAULT_REBOOT_MODE; + +int reboot_default; +int reboot_cpu; +enum reboot_type reboot_type = BOOT_ACPI; +int reboot_force; + /* * If set, this is used for preparing the system to power off. */ @@ -87,7 +100,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier); static void migrate_to_reboot_cpu(void) { /* The boot cpu is always logical cpu 0 */ - int cpu = 0; + int cpu = reboot_cpu; cpu_hotplug_disable(); @@ -343,3 +356,64 @@ int orderly_poweroff(bool force) return 0; } EXPORT_SYMBOL_GPL(orderly_poweroff); + +static int __init reboot_setup(char *str) +{ + for (;;) { + /* + * Having anything passed on the command line via + * reboot= will cause us to disable DMI checking + * below. + */ + reboot_default = 0; + + switch (*str) { + case 'w': + reboot_mode = REBOOT_WARM; + break; + + case 'c': + reboot_mode = REBOOT_COLD; + break; + + case 'h': + reboot_mode = REBOOT_HARD; + break; + + case 's': + if (isdigit(*(str+1))) + reboot_cpu = simple_strtoul(str+1, NULL, 0); + else if (str[1] == 'm' && str[2] == 'p' && + isdigit(*(str+3))) + reboot_cpu = simple_strtoul(str+3, NULL, 0); + else + reboot_mode = REBOOT_SOFT; + break; + + case 'g': + reboot_mode = REBOOT_GPIO; + break; + + case 'b': + case 'a': + case 'k': + case 't': + case 'e': + case 'p': + reboot_type = *str; + break; + + case 'f': + reboot_force = 1; + break; + } + + str = strchr(str, ','); + if (str) + str++; + else + break; + } + return 1; +} +__setup("reboot=", reboot_setup);