diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 763ae1d3bca80b..81d2e5e5ce9689 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -516,23 +516,56 @@ static int sja1105_init_avb_params(struct sja1105_private *priv) return 0; } +/* The L2 policing table is 2-stage. The table is looked up for each frame + * according to the ingress port, whether it was broadcast or not, and the + * classified traffic class (given by VLAN PCP). This portion of the lookup is + * fixed, and gives access to the SHARINDX, an indirection register pointing + * within the policing table itself, which is used to resolve the policer that + * will be used for this frame. + * + * Stage 1 Stage 2 + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 0 |SHARINDX| | Policer 0: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 1 |SHARINDX| | Policer 1: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 2: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 0 TC 7 |SHARINDX| | Policer 3: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 1 TC 0 |SHARINDX| | Policer 4: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 5: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 1 TC 7 |SHARINDX| | Policer 6: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * ... | Policer 7: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * |Port 4 TC 7 |SHARINDX| ... + * +------------+--------+ + * |Port 0 BCAST|SHARINDX| ... + * +------------+--------+ + * |Port 1 BCAST|SHARINDX| ... + * +------------+--------+ + * ... ... + * +------------+--------+ +---------------------------------+ + * |Port 4 BCAST|SHARINDX| | Policer 44: Rate, Burst, MTU | + * +------------+--------+ +---------------------------------+ + * + * In this driver, we shall use policers 0-4 as statically alocated port + * (matchall) policers. So we need to make the SHARINDX for all lookups + * corresponding to this ingress port (8 VLAN PCP lookups and 1 broadcast + * lookup) equal. + * The remaining policers (40) shall be dynamically allocated for flower + * policers, where the key is either vlan_prio or dst_mac ff:ff:ff:ff:ff:ff. + */ #define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) -static void sja1105_setup_policer(struct sja1105_l2_policing_entry *policing, - int index, int mtu) -{ - policing[index].sharindx = index; - policing[index].smax = 65535; /* Burst size in bytes */ - policing[index].rate = SJA1105_RATE_MBPS(1000); - policing[index].maxlen = mtu; - policing[index].partition = 0; -} - static int sja1105_init_l2_policing(struct sja1105_private *priv) { struct sja1105_l2_policing_entry *policing; struct sja1105_table *table; - int i, j, k; + int port, tc; table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; @@ -551,22 +584,29 @@ static int sja1105_init_l2_policing(struct sja1105_private *priv) policing = table->entries; - /* k sweeps through all unicast policers (0-39). - * bcast sweeps through policers 40-44. - */ - for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) { - int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i; + /* Setup shared indices for the matchall policers */ + for (port = 0; port < SJA1105_NUM_PORTS; port++) { + int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + port; + + for (tc = 0; tc < SJA1105_NUM_TC; tc++) + policing[port * SJA1105_NUM_TC + tc].sharindx = port; + + policing[bcast].sharindx = port; + } + + /* Setup the matchall policer parameters */ + for (port = 0; port < SJA1105_NUM_PORTS; port++) { int mtu = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; - if (dsa_is_cpu_port(priv->ds, i)) + if (dsa_is_cpu_port(priv->ds, port)) mtu += VLAN_HLEN; - for (j = 0; j < SJA1105_NUM_TC; j++, k++) - sja1105_setup_policer(policing, k, mtu); - - /* Set up this port's policer for broadcast traffic */ - sja1105_setup_policer(policing, bcast, mtu); + policing[port].smax = 65535; /* Burst size in bytes */ + policing[port].rate = SJA1105_RATE_MBPS(1000); + policing[port].maxlen = mtu; + policing[port].partition = 0; } + return 0; } @@ -2129,10 +2169,8 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds, static int sja1105_change_mtu(struct dsa_switch *ds, int port, int new_mtu) { - int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + port; struct sja1105_l2_policing_entry *policing; struct sja1105_private *priv = ds->priv; - int tc; new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; @@ -2141,16 +2179,10 @@ static int sja1105_change_mtu(struct dsa_switch *ds, int port, int new_mtu) policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; - /* We set all 9 port policers to the same value, so just checking the - * broadcast one is fine. - */ - if (policing[bcast].maxlen == new_mtu) + if (policing[port].maxlen == new_mtu) return 0; - for (tc = 0; tc < SJA1105_NUM_TC; tc++) - policing[port * SJA1105_NUM_TC + tc].maxlen = new_mtu; - - policing[bcast].maxlen = new_mtu; + policing[port].maxlen = new_mtu; return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); } @@ -2250,6 +2282,40 @@ static void sja1105_mirror_del(struct dsa_switch *ds, int port, mirror->ingress, false); } +static int sja1105_port_policer_add(struct dsa_switch *ds, int port, + struct dsa_mall_policer_tc_entry *policer) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_private *priv = ds->priv; + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + /* In hardware, every 8 microseconds the credit level is incremented by + * the value of RATE bytes divided by 64, up to a maximum of SMAX + * bytes. + */ + policing[port].rate = div_u64(512 * policer->rate_bytes_per_sec, + 1000000); + policing[port].smax = div_u64(policer->rate_bytes_per_sec * + PSCHED_NS2TICKS(policer->burst), + PSCHED_TICKS_PER_SEC); + + return sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + +static void sja1105_port_policer_del(struct dsa_switch *ds, int port) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_private *priv = ds->priv; + + policing = priv->static_config.tables[BLK_IDX_L2_POLICING].entries; + + policing[port].rate = SJA1105_RATE_MBPS(1000); + policing[port].smax = 65535; + + sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); +} + static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, @@ -2288,6 +2354,8 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_setup_tc = sja1105_port_setup_tc, .port_mirror_add = sja1105_mirror_add, .port_mirror_del = sja1105_mirror_del, + .port_policer_add = sja1105_port_policer_add, + .port_policer_del = sja1105_port_policer_del, }; static int sja1105_check_device_id(struct sja1105_private *priv)