diff --git a/docs/AdvancedTroubleShooting.md b/docs/AdvancedTroubleShooting.md
index 8ed799c..5da9a09 100644
--- a/docs/AdvancedTroubleShooting.md
+++ b/docs/AdvancedTroubleShooting.md
@@ -105,9 +105,9 @@ See [fakegato-history](https://github.com/simont77/fakegato-history)
 ### Step 1.  Check that the characteristic is polled.
     Only polled characteristics are recorded. For history to be collected you will have to enable polling and interval for the accessory, and according to the fakegato-history documents it should be less than 10 minutes (600 seconds). The new polling config section allows for each characteristic to be polled at their individual times. Check your config.json for this setup. An example of polling is:
 ```json
-"polling": [{"characteristic": "CurrentHeatingCoolingState",
+"polling": [{"characteristic": "currentHeatingCoolingState",
              "interval": 540,  "timeout": 4000},
-            {"characteristic": "CurrentTemperature",
+            {"characteristic": "currentTemperature",
              "interval": 60,   "timeout": 4000}
            ],
 ```
@@ -120,8 +120,8 @@ See [fakegato-history](https://github.com/simont77/fakegato-history)
 
 ```json
 "fakegato":{"eve":"thermo",
-            "currentTemp": "CurrentTemperature",
-            "setTemp": "TargetTemperature",
+            "currentTemp": "currentTemperature",
+            "setTemp": "targetTemperature",
             "valvePosition": "0",
             "storage": "fs",
             "storagePath": ".homebridge/FakegatoStorage",
diff --git a/docs/Developers.md b/docs/Developers.md
index 3041b72..01e9365 100644
--- a/docs/Developers.md
+++ b/docs/Developers.md
@@ -74,8 +74,8 @@
                      "volumeControlType":      "ABSOLUTE",
                      "state_cmd": "node .homebridge/YourScriptHere.js",
                      "polling": [
-                        {"characteristic": "Active",         "interval": 50,  "timeout": 5000},
-                        {"characteristic": "VolumeSelector", "interval": 50,  "timeout": 5000}
+                        {"characteristic": "active",         "interval": 50,  "timeout": 5000},
+                        {"characteristic": "volumeSelector", "interval": 50,  "timeout": 5000}
                      ]
                   }
               ],
@@ -118,9 +118,9 @@
                "pictureMode":               "STANDARD",
                "remoteKey":                 "SELECT",
                "polling": [
-                  {"characteristic": "Active",            "interval": 50,  "timeout": 5000},
-                  {"characteristic": "ActiveIdentifier",  "interval": 50,  "timeout": 5000},
-                  {"characteristic": "CurrentMediaState", "interval": 540, "timeout": 5000}
+                  {"characteristic": "active",            "interval": 50,  "timeout": 5000},
+                  {"characteristic": "activeIdentifier",  "interval": 50,  "timeout": 5000},
+                  {"characteristic": "currentMediaState", "interval": 540, "timeout": 5000}
                ],
                "stateChangeResponseTime":    3,
                "state_cmd": "node .homebridge/YourScriptHere.js"
@@ -205,8 +205,8 @@ Notice that there is no Platform definition. Otherwise everything is the same. Y
 
 ```json
 "interval": 5,
-"polling": [ { "characteristic": "CurrentTemperature", "queue": "A" },
-             { "characteristic": "TargetTemperature", "queue": "A" }
+"polling": [ { "characteristic": "currentTemperature", "queue": "A" },
+             { "characteristic": "targetTemperature", "queue": "A" }
            ]
 ```
   The interval of the characteristic is defined through the heirarch of the Platform/Accessory and then the Characteristic, as always.<BR>
@@ -217,8 +217,8 @@ Notice that there is no Platform definition. Otherwise everything is the same. Y
              ],
 "queue": "A",
 "interval": 10,
-"polling": [ { "characteristic": "CurrentTemperature" },
-             { "characteristic": "TargetTemperature", "interval": 15 }
+"polling": [ { "characteristic": "currentTemperature" },
+             { "characteristic": "targetTemperature", "interval": 15 }
            ]
 ```
 Example 3:
@@ -239,9 +239,9 @@ Example 3:
         "type": "Thermostatwitch",
         "interval": 15,
         "queue": "A",
-        "polling": [ { "characteristic": "CurrentTemperature" },
-                     { "characteristic": "TargetTemperature" },
-                     { "characteristic": "CurrentHeatingCoolingState", "interval": 25 }
+        "polling": [ { "characteristic": "currentTemperature" },
+                     { "characteristic": "targetTemperature" },
+                     { "characteristic": "currentHeatingCoolingState", "interval": 25 }
                    ],
         ...
      },
@@ -262,7 +262,7 @@ Example 3:
      {
         "name": "Switch2",
         "type": "Switch",
-        "polling": [ { "characteristic": "On", "queue": "D" } ],   // Defaults to "WoRm"
+        "polling": [ { "characteristic": "on", "queue": "D" } ],   // Defaults to "WoRm"
         ...
      }
 
@@ -293,10 +293,10 @@ Example 3:
                     "model": "e-zone",
                     "serialNumber": "Fujitsu e-zone2",
                     "polling": [
-                        { "characteristic": "CurrentTemperature", "queue": "A"  }
+                        { "characteristic": "currentTemperature", "queue": "A"  }
                     ],
                     "props": {
-                        "CurrentTemperature": {
+                        "currentTemperature": {
                             "maxValue": 100,
                             "minValue": -100,
                             "minStep": 0.1
@@ -328,7 +328,7 @@ Example 3:
                     "model": "e-zone",
                     "serialNumber": "Fujitsu e-zone2",
                     "polling": [
-                        { "characteristic": "On", "queue": "A" }
+                        { "characteristic": "on", "queue": "A" }
                     ],
                     "stateChangeResponseTime": 1,
                     "state_cmd": "bash /home/pi/ezone.sh"
@@ -347,10 +347,10 @@ Example 3:
                     "serialNumber": "Fujitsu e-zone2",
                     "queue": "A",  // All characteristics would go to queue "A"
                     "polling": [
-                        { "characteristic": "CurrentHeatingCoolingState" },
-                        { "characteristic": "TargetHeatingCoolingState" },
-                        { "characteristic": "CurrentTemperature" },
-                        { "characteristic": "TargetTemperature" }
+                        { "characteristic": "currentHeatingCoolingState" },
+                        { "characteristic": "targetHeatingCoolingState" },
+                        { "characteristic": "currentTemperature" },
+                        { "characteristic": "targetTemperature" }
                     ],
                     "state_cmd": "bash /home/pi/ezone.sh"
                 }
@@ -404,8 +404,8 @@ See [fakegato-history](https://github.com/simont77/fakegato-history)
 
 ```json
 "fakegato":{"eve":"thermo",
-            "currentTemp": "CurrentTemperature",
-            "setTemp": "TargetTemperature",
+            "currentTemp": "currentTemperature",
+            "setTemp": "targetTemperature",
             "valvePosition": "0",
             "storage": "fs",
             "storagePath": ".homebridge/FakegatoStorage",
@@ -425,9 +425,9 @@ The value "0" should be used for any characteristics value which is not possible
 &nbsp;&nbsp;&nbsp; For history to be collected you will have to enable polling and interval for the accessory, and according to the fakegato-history documents it should be less than 10 minutes (600 seconds). The new polling config section allows for each characteristic to be polled at their individual times.
 
 ```json
-"polling": [{"characteristic": "CurrentHeatingCoolingState",
+"polling": [{"characteristic": "currentHeatingCoolingState",
              "interval": 540,  "timeout": 4000},
-            {"characteristic": "CurrentTemperature",
+            {"characteristic": "currentTemperature",
              "interval": 60,   "timeout": 4000}
            ],
 ```