FW1906 single white flash when turned on

[Suxsem]

What happened?

I have a long strip of FW1906 leds (RGBCCT) and a relay to turn off the power supply when not in use (using the built-in relay feature of WLED). WLED controller is always powered.
Every time I turn on the strip I get a brief (like 0.1s or so) white flash at full brightness before getting the desired color/brightness.
Any help?
Thank you!

To Reproduce Bug

.

Expected Behavior

.

Install Method

Binary from WLED.me

What version of WLED?

WLED 0.15.0-b3

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[Suxsem]

No one experienced this?

[softhack007]

In case you use an SSR relay to control AC power - it might be a hardware problem.

• blink random color when turning on with relay (using SSR to control AC power to PSU) #3581

Another possibility is is you're using TX or one of the esp32 "strapping pins". These are driven by the bootloader, when WLED is not running yet. In this case, try a different pin for LEDs driving.

This site has a good overview:

• https://espeasy.readthedocs.io/en/latest/Reference/GPIO.html#best-pins-to-use-on-esp32

[github-actions]

Hey! This issue has been open for quite some time without any new comments now. It will be closed automatically in a week if no further activity occurs.
Thank you for using WLED! ✨