Archer AX10 incorrect command is sent or triggered

[Malte-HAWK]

Describe the bug
The Problem is: that you are always thrown out of the WiFi when it is started via the home assistant because, as can be seen in the log, an incorrect command is sent or triggered

Logs
Log when I start the home assistant**.
####################################################################

Archer AX10 System Log

Time = 2024-06-21 09:30:23

H-Ver = 1.0.0 ; S-Ver = 1.3.10 Build 20240130 Rel. 77367

LAN: I = 10.105.100.49 ; M = 255.255.0.0 ; MAC =

Clients connected: 0 ; WI-FI : 0

####################################################################
2024-06-21 09:28:04 led-controller[946]: <6> 288051 Start to run WIFI2G_OFF
2024-06-21 09:28:04 led-controller[946]: <6> 288051 Start to run WIFI5G_OFF
2024-06-21 09:27:37 wireless[11957]: <6> 208040 Wireless band 5G switch set off
2024-06-21 09:27:30 led-controller[946]: <6> 288051 Start to run WIFI2G_OFF
2024-06-21 09:27:30 led-controller[946]: <6> 288051 Start to run WIFI5G_OFF
2024-06-21 09:27:29 wireless[11317]: <6> 208040 Wireless band 2.4G switch set off
2024-06-21 09:26:32 led-controller[946]: <6> 288051 Start to run WIFI2G_OFF
2024-06-21 09:26:32 led-controller[946]: <6> 288051 Start to run WIFI5G_OFF
2024-06-21 09:26:07 wireless[7720]: <6> 208040 Wireless band 5G switch set on
2024-06-21 09:26:01 led-controller[946]: <6> 288051 Start to run WIFI2G_OFF
2024-06-21 09:26:01 led-controller[946]: <6> 288051 Start to run WIFI5G_OFF
2024-06-21 09:26:00 wireless[7070]: <6> 208040 Wireless band 2.4G switch set on

Log when I start from the website:

####################################################################

Archer AX10 System Log

Time = 2024-06-21 09:33:50

H-Ver = 1.0.0 ; S-Ver = 1.3.10 Build 20240130 Rel. 77367

LAN: I = 10.105.100.49 ; M = 255.255.0.0 ; MAC =

Clients connected: 0 ; WI-FI : 0

####################################################################
2024-06-21 09:32:15 led-controller[946]: <6> 288051 Start to run WIFI2G_OFF
2024-06-21 09:32:15 led-controller[946]: <6> 288051 Start to run WIFI5G_OFF
2024-06-21 09:32:14 wireless[21816]: <6> 208040 Wireless band 5G switch set off
2024-06-21 09:32:14 wireless[21816]: <6> 208040 Wireless band 2.4G switch set off
2024-06-21 09:31:05 led-controller[946]: <6> 288051 Start to run WIFI2G_ON
2024-06-21 09:31:05 led-controller[946]: <6> 288051 Start to run WIFI5G_ON
2024-06-21 09:31:04 wireless[19107]: <6> 208040 Wireless band 5G switch set on
2024-06-21 09:31:04 wireless[19107]: <6> 208040 Wireless band 2.4G switch set on

Additional Information (please complete the following information)

• Router Hardware Version: Archer AX10 v1.0
• Router Firmware Version: 1.3.10 Build 20240130 Rel. 77367(4555)
• Home Assistant Version:
  Core 2024.6.3
  Supervisor 2024.06.0
  Operating System 12.4
  Frontend 20240610.1
• TP-Link Router Integration Component Version: 1.15.0

[AlexandrErohin]

Is there any relevant logs from Settings->System->Logs?

[Malte-HAWK]

What is in the message is the only thing that was in the log

[AlexandrErohin]

As I dont have this router - It is better if you can test the python client https://github.com/AlexandrErohin/TP-Link-Archer-C6U