Skip to content

Latest commit

 

History

History
39 lines (32 loc) · 2.1 KB

README.md

File metadata and controls

39 lines (32 loc) · 2.1 KB
Raw

EX2_OBC_SOFTWARE

Welcome 👋 - this is the central repository for the Ex-alta 2 OBC, dubbed 'Athena'.

The software in this repository reflects the designs found in the Ex-Alta 2 Critical Design Review document, and separate folders contain software submodules for the Equipment Handlers (EH), Hardware Interface (HIL) and On-board services.

File Structure

  • ex2_hal/
    • Software submodules for connected hardware devices. These submodules are responsible for implementing the hardware Equiment Handlers, and Hardware Interface Layer that will be used in the higher layers.
  • ex2_services/
    • Software defining the CSP listeners and service handlers that expose the satellite's functionality to the ground user.
  • ex2_system/
    • Collection of background tasks that do work during the satellite's operation
  • libcsp/
    • Submodule for the for the CSP network software.
  • main/
    • Main entry point, and LEOP sequence. All background tasks and third-part systems (i.e. Reliance Edge, FreeRTOS Sceduler, and CSP node) are initialized here.
  • source/
    • HalCoGEN generated source files including hardware drivers, and configurations

Getting Started

  1. Clone this repository and all submodules: git clone --recursive https://github.com/AlbertaSat/ex2_obc_software.git then, assuming you wish to work on the latest version of all submodules, run git submodule foreach git pull origin master Note: Just cd into the submodule and change branches from there if you need some branch other than master

  2. Download Code Composer Studio v10

  3. Create a new empty workspace folder on your computer (wherever you want, but name it differently than the repository name, so not 'ex2_obc_software')

  4. Open Code Composer Studio to your workspace file

  5. Import this code as a CCS Project: Select File > Import Select Code Composer Studio as your import wizard Choose CCS Projects Then browse the this repository, and select the discovered project Select Finish

  6. You can now build and debug, and flash this project to a Texas Instruments development board!