makefile

#
# This is the makefile for compiling PETSc. See
# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc.
# See also conf for additional commands.
#
ALL: all
LOCDIR	 = ./
DIRS	 = src include tutorials interfaces share/petsc/matlab
CFLAGS	 =
FFLAGS	 =
CPPFLAGS =
FPPFLAGS =

# next line defines PETSC_DIR and PETSC_ARCH if they are not set
include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables
include ${PETSC_DIR}/lib/petsc/conf/variables
include ${PETSC_DIR}/lib/petsc/conf/rules
include ${PETSC_DIR}/lib/petsc/conf/test.common

# This makefile contains a lot of PHONY targets with improperly specified prerequisites
# where correct execution instead depends on the targets being processed in the correct
# order.  This is gross, but this makefile doesn't really do any work.  Sub-makes still
# benefit from parallelism.
.NOTPARALLEL:

OMAKE_SELF = $(OMAKE) -f makefile
OMAKE_SELF_PRINTDIR = $(OMAKE_PRINTDIR) -f makefile

#
# Basic targets to build PETSc libraries.
#
all:
	+@${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log
	@ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log
	+@${OMAKE_SELF_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;
	@egrep '(out of memory allocating.*after a total of|gfortran: fatal error: Killed signal terminated program f951)' ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/memoryerror.log > /dev/null
	@egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null
	+@if test -s ${PETSC_ARCH}/lib/petsc/conf/memoryerror.log; then \
           printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \
           echo "  Error during compile, you need to increase the memory allocated to the VM and rerun " 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \
           printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\
         elif test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \
           printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \
           echo "  Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \
           echo "  Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\
           printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\
	 else \
	  ${OMAKE_SELF} print_mesg_after_build PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\
        fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below
	@echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log
	@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi

all-local: info libs matlabbin mpi4py-build petsc4py-build libmesh-build mfem-build slepc-build hpddm-build amrex-build bamg-build

#
# Prints information about the system and version of PETSc being compiled
#
info:
	-@echo "=========================================="
	-@echo " "
	-@echo "See documentation/faq.html and documentation/bugreporting.html"
	-@echo "for help with installation problems.  Please send EVERYTHING"
	-@echo "printed out below when reporting problems.  Please check the"
	-@echo "mailing list archives and consider subscribing."
	-@echo " "
	-@echo "  http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html"
	-@echo " "
	-@echo "=========================================="
	-@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'`
	-@echo Machine characteristics: `uname -a`
	-@echo "-----------------------------------------"
	-@echo "Using PETSc directory: ${PETSC_DIR}"
	-@echo "Using PETSc arch: ${PETSC_ARCH}"
	-@echo "-----------------------------------------"
	-@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//"
	-@echo "-----------------------------------------"
	-@echo "Using configure Options: ${CONFIGURE_OPTIONS}"
	-@echo "Using configuration flags:"
	-@grep "\#define " ${PETSCCONF_H}
	-@echo "-----------------------------------------"
	-@echo "Using C compile: ${PETSC_CCOMPILE_SINGLE}"
	-@if [  "${MPICC_SHOW}" != "" ]; then \
             printf  "mpicc -show: %b\n" "${MPICC_SHOW}";\
          fi; \
        printf  "C compiler version: %b\n" "${C_VERSION}"; \
        if [ "${CXX}" != "" ]; then \
        echo "Using C++ compile: ${PETSC_CXXCOMPILE_SINGLE}";\
        if [ "${MPICXX_SHOW}" != "" ]; then \
               printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \
            fi;\
            printf  "C++ compiler version: %b\n" "${Cxx_VERSION}"; \
          fi
	-@if [ "${FC}" != "" ]; then \
	   echo "Using Fortran compile: ${PETSC_FCOMPILE_SINGLE}";\
           if [ "${MPIFC_SHOW}" != "" ]; then \
             printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \
           fi; \
             printf  "Fortran compiler version: %b\n" "${FC_VERSION}"; \
         fi
	-@if [ "${CUDAC}" != "" ]; then \
	   echo "Using CUDA compile: ${PETSC_CUCOMPILE_SINGLE}";\
         fi
	-@if [ "${CLANGUAGE}" = "CXX" ]; then \
           echo "Using C++ compiler to compile PETSc";\
        fi
	-@echo "-----------------------------------------"
	-@echo "Using C/C++ linker: ${PCC_LINKER}"
	-@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}"
	-@if [ "${FC}" != "" ]; then \
	   echo "Using Fortran linker: ${FC_LINKER}";\
	   echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\
         fi
	-@echo "-----------------------------------------"
	-@echo "Using system modules: ${LOADEDMODULES}"
	-@if [ "${MPI_IS_MPIUNI}" = "1" ]; then \
           echo Using mpi.h: mpiuni; \
        else \
           TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \
           echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \
           BUF=`${CPP} ${PETSC_CPPFLAGS} ${PETSC_CC_INCLUDES} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \
           echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR}; \
        fi
	-@echo "-----------------------------------------"
	-@echo "Using libraries: ${PETSC_LIB}"
	-@echo "------------------------------------------"
	-@echo "Using mpiexec: ${MPIEXEC}"
	-@echo "------------------------------------------"
	-@echo "Using MAKE: $(MAKE)"
	-@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(MAKE_LOAD) $(MAKEFLAGS)"
	-@echo "=========================================="

#
# Build MatLab binaries
#
matlabbin:
	-@if [ "${MATLAB_MEX}" != "" -a "${MATLAB_SOCKET}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \
          echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \
            if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR}  ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \
            if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR}  ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \
            cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE_SELF} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \
            echo "========================================="; \
        fi
#
# Builds PETSc check examples for a given architecture
#
check_install: check
check:
	-+@${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} check_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/check.log
checkx:
	-@${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} checkx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/checkx.log
check_build:
	-@echo "Running check examples to verify correct installation"
	-@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}"
	+@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy
	+@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testex19
	+@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] &&  [ "${PETSC_SCALAR}" = "real" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \
         fi;
	+@if [ "${CUDA_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] &&  [ "${PETSC_SCALAR}" = "real" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_cuda; \
         fi;
	+@if [ "${KOKKOS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] &&  [ "${PETSC_SCALAR}" = "real" ] && [ "${PETSC_PRECISION}" = "double" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex3_kokkos; \
         fi;
	+@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR}  DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \
         fi;
	+@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR}  DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \
         fi;
	+@if [ "${HDF5_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \
          cd src/vec/vec/tests >/dev/null; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} ex47.PETSc DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex47; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy; \
         fi;
	+@if [ "${AMREX_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \
           echo "Running testamres examples to verify correct installation";\
           echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}";\
           cd src/ksp/ksp/tutorials/amrex >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy;\
           ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testamrex;\
         fi;
	+@if ( [ "${ML_LIB}" != "" ] ||  [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR}  DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \
         fi;
	+@if [ "${SUITESPARSE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_suitesparse; \
         fi;
	+@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} ex19.rm
	+@if [ "${PETSC4PY}" = "yes" ]; then \
          cd src/ksp/ksp/tutorials >/dev/null; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testex100; \
          ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy; \
         fi;
	+@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \
         if test -s .ftn.log; then \
          cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testex5f; \
         fi; ${RM} .ftn.log;
	+@egrep "^#define PETSC_HAVE_MATLAB_ENGINE 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \
         if test -s .ftn.log; then \
          cd src/vec/vec/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testex31; \
         fi; ${RM} .ftn.log;
	+@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy
	-@echo "Completed test examples"
checkx_build:
	-@echo "Running graphics check example to verify correct X11 installation"
	-@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}"
	@cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy
	@cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testxex19
	@cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy
	-@echo "Completed graphics check example"
check_usermakefile:
	-@echo "Testing compile with user makefile"
	-@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}"
	@cd src/snes/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex19
	@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \
         if test -s .ftn.log; then \
          cd src/snes/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex5f; \
         fi; ${RM} .ftn.log;
	@cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean-legacy
	-@echo "Completed compile with user makefile"

# Compare ABI/API of two versions of PETSc library with the old one defined by PETSC_{DIR,ARCH}_ABI_OLD
abitest:
	@if [ "${PETSC_DIR_ABI_OLD}" = "" ] || [ "${PETSC_ARCH_ABI_OLD}" = "" ]; \
		then printf "You must set environment variables PETSC_DIR_ABI_OLD and PETSC_ARCH_ABI_OLD to run abitest\n"; \
		exit 1; \
	fi;
	-@echo "Comparing ABI/API of the following two PETSc versions (you must have already configured and built them using GCC and with -g):"
	-@echo "========================================================================================="
	-@echo "    Old: PETSC_DIR_ABI_OLD  = ${PETSC_DIR_ABI_OLD}"
	-@echo "         PETSC_ARCH_ABI_OLD = ${PETSC_ARCH_ABI_OLD}"
	-@pushd ${PETSC_DIR_ABI_OLD} >> /dev/null ; echo "         Branch             = "`git rev-parse --abbrev-ref HEAD`
	-@echo "    New: PETSC_DIR          = ${PETSC_DIR}"
	-@echo "         PETSC_ARCH         = ${PETSC_ARCH}"
	-@echo "         Branch             = "`git rev-parse --abbrev-ref HEAD`
	-@echo "========================================================================================="
	-@$(PYTHON)	${PETSC_DIR}/lib/petsc/bin/maint/abicheck.py -old_dir ${PETSC_DIR_ABI_OLD} -old_arch ${PETSC_ARCH_ABI_OLD} -new_dir ${PETSC_DIR} -new_arch ${PETSC_ARCH} -report_format html

# Compare ABI/API of current PETSC_ARCH/PETSC_DIR with a previous branch
abitestcomplete:
	-@if [[ -f "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log" ]]; then \
          OPTIONS=`grep -h -m 1 "Configure Options: " ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log  | sed "s!Configure Options: --configModules=PETSc.Configure --optionsModule=config.compilerOptions!!g"` ;\
echo $${OPTIONS} ;\
        fi ; \
        if [[ "${PETSC_DIR_ABI_OLD}" != "" ]]; then \
          PETSC_DIR_OLD=${PETSC_DIR_ABI_OLD}; \
        else \
          PETSC_DIR_OLD=${PETSC_DIR}/../petsc-abi; \
        fi ; \
        echo "=================================================================================================" ;\
        echo "Doing ABI/API comparison between" ${branch} " and " `git rev-parse --abbrev-ref HEAD` "using " $${OPTIONS} ;\
        echo "=================================================================================================" ;\
        if [[ ! -d $${PETSC_DIR_OLD} ]]; then \
          git clone ${PETSC_DIR} $${PETSC_DIR_OLD} ; \
        else \
          cd $${PETSC_DIR_OLD} ; \
          git pull ; \
        fi ; \
        cd $${PETSC_DIR_OLD} ; \
        git checkout ${branch} ; \
        PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` ./configure $${OPTIONS} ; \
        PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` make all test ; \
        cd ${PETSC_DIR} ; \
        ./configure $${OPTIONS}; \
        make all test ; \
        PETSC_DIR_ABI_OLD=$${PETSC_DIR_OLD} PETSC_ARCH_ABI_OLD=arch-branch-`git rev-parse ${branch}` make abitest

# Deletes PETSc libraries
deletelibs:
	-${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.*
deletemods:
	-${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod

allclean:
	-@${OMAKE} -f gmakefile clean

clean:: allclean

distclean: chk_petscdir
	@if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \
	  echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \
          mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi
	@echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***"
	-${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/


#
reconfigure:
	@unset MAKEFLAGS && ${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py
#
install:
	@${PYTHON} ./config/install.py -destDir=${DESTDIR}
	+${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install mfem-install slepc-install hpddm-install amrex-install bamg-install

mpistreams:
	+@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistreams

mpistream:
	+@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistream

openmpstreams:
	+@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstreams

openmpstream:
	+@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstream

# for legacy reasons
stream: mpistream

streams: mpistreams

# ------------------------------------------------------------------
#
# All remaining actions are intended for PETSc developers only.
# PETSc users should not generally need to use these commands.
#
#  See the users manual for how the tags files may be used from Emacs and Vi/Vim
#
alletags:
	-@${PYTHON} lib/petsc/bin/maint/generateetags.py
	-@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON

# obtain gtags from https://www.gnu.org/software/global/
allgtags:
	-@find ${PETSC_DIR}/include ${PETSC_DIR}/src -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|cxx\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto  | gtags -f -

allfortranstubs:
	-@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir
	@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT}  ${VERBOSE}
	-@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge  ${VERBOSE}
	-@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir
deletefortranstubs:
	-@find . -type d -name ftn-auto | xargs rm -rf

# Builds all the documentation - should be done every night
alldoc: allcite allpdf sphinx-docs-all alldoc1 alldoc2 docsetdate

# Build just citations
allcite: chk_loc deletemanualpages
	-${PYTHON} lib/petsc/bin/maint/countpetsccits.py
	-${OMAKE_SELF} ACTION=manualpages_buildcite tree_basic LOC=${LOC}
	-@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap
	-@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap

# Build just TAO PDF manual + prerequisites
allpdf: chk_loc allcite
	-cd src/docs/tao_tex/manual; ${OMAKE_SELF} manual.pdf LOC=${LOC}

# Build just manual pages + prerequisites
allmanpages: chk_loc allcite
	-${OMAKE_SELF} ACTION=manualpages tree_basic LOC=${LOC}

# Build just manual examples + prerequisites
allmanexamples: chk_loc allmanpages
	-${OMAKE_SELF} ACTION=manexamples tree_basic LOC=${LOC}

# Build everything that goes into 'doc' dir except html sources
alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples
	-${OMAKE_SELF} manimplementations LOC=${LOC}
	-${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC}
	-${OMAKE_SELF} ACTION=getexlist tree_basic LOC=${LOC}
	-${OMAKE_SELF} ACTION=exampleconcepts tree_basic LOC=${LOC}
	-${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC}

# Builds .html versions of the source
# html overwrites some stuff created by update-docs - hence this is done later.
alldoc2: chk_loc allcite
	-${OMAKE_SELF} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC}
	-${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC}
#
# Makes links for all manual pages in $LOC/docs/manualpages/all
allman:
	@cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find *  -type d -wholename all -prune -o -name index.html -prune  -o -type f -name \*.html -exec ln -s  -f ../{} all \;

DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune

# modify all generated html files and add in version number, date, canonical URL info.
docsetdate: chk_petscdir
	@echo "Updating generated html files with petsc version, date, canonical URL info";\
        version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
        version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
        version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
        version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
        if  [ $${version_release} = 0 ]; then \
          petscversion=petsc-master; \
          export petscversion; \
        elif [ $${version_release} = 1 ]; then \
          petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \
          export petscversion; \
        else \
          echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \
          exit; \
        fi; \
        datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \
        export datestr; \
        gitver=`git describe --match "v*"`; \
        export gitver; \
        find * -type d -wholename src/docs/website \
          -prune -o -type d -wholename src/benchmarks/results \
          -prune -o -type d -wholename config/BuildSystem/docs/website \
          -prune -o -type d -wholename include/web \
          -prune -o -type d -wholename 'arch-*' \
          -prune -o -type d -wholename lib/petsc/bin/maint \
          -prune -o -type d -wholename externalpackages \
          -prune ${DOCSETDATE_PRUNE_LIST} -o -type f -name \*.html \
          -exec perl -pi -e 's^(<body.*>)^$$1\n   <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n   <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \
          -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \
        echo "Done fixing version number, date, canonical URL info"

# Use Sphinx to build some documentation.  This uses Python's venv, which should
# behave similarly to what happens on e.g. ReadTheDocs. You may prefer to use
# your own Python environment and directly build the Sphinx docs by using
# the makefile in ${PETSC_SPHINX_ROOT}, paying attention to the requirements.txt
# there.
PETSC_SPHINX_ROOT=src/docs/sphinx_docs
PETSC_SPHINX_ENV=${PETSC_ARCH}/sphinx_docs_env
PETSC_SPHINX_DEST=docs/sphinx_docs

sphinx-docs-all: sphinx-docs-manual sphinx-docs-html
	-@cd src/binding/petsc4py ; make docs

sphinx-docs-fast: chk_loc sphinx-docs-env
	@. ${PETSC_SPHINX_ENV}/bin/activate && ${OMAKE} -C ${PETSC_SPHINX_ROOT} \
		BUILDDIR=${LOC}/${PETSC_SPHINX_DEST} html

sphinx-docs-html: chk_loc allcite sphinx-docs-env
	@. ${PETSC_SPHINX_ENV}/bin/activate && ${OMAKE} -C ${PETSC_SPHINX_ROOT} \
		BUILDDIR=${LOC}/${PETSC_SPHINX_DEST} html

sphinx-docs-manual: chk_loc sphinx-docs-env
	@. ${PETSC_SPHINX_ENV}/bin/activate && ${OMAKE} -C ${PETSC_SPHINX_ROOT}  BUILDDIR=${LOC}/${PETSC_SPHINX_DEST} latexpdf
	@mv ${LOC}/${PETSC_SPHINX_DEST}/latex/manual.pdf ${LOC}/docs/manual.pdf
	@${RM} -rf ${LOC}/${PETSC_SPHINX_DEST}/latex

sphinx-docs-env: sphinx-docs-check-python sphinx-docs-check-rsvg-convert
	@if [ ! -d  "${PETSC_SPHINX_ENV}" ]; then \
        ${PYTHON} -m venv ${PETSC_SPHINX_ENV}; \
        . ${PETSC_SPHINX_ENV}/bin/activate; \
        pip install -r ${PETSC_SPHINX_ROOT}/requirements.txt; \
      fi

sphinx-docs-check-rsvg-convert:
	@if ! command -v rsvg-convert 2>&1 > /dev/null; then \
		    printf "rsvg-convert is required for the sphinxcontrib-svg2pdfconverter extension for the Sphinx docs\n"; \
			  false; \
	    fi

sphinx-docs-check-python:
	@${PYTHON} -c 'import sys; sys.exit(sys.version_info[:2] < (3,3))' || \
    (printf 'Working Python 3.3 or later is required to build the Sphinx docs in a virtual environment\nTry e.g.\n  make ... PYTHON=python3\n' && false)

sphinx-docs-clean: chk_loc
	${RM} -rf ${PETSC_SPHINX_ENV}
	${RM} -rf ${LOC}/${PETSC_SPHINX_DEST}

alldocclean: deletemanualpages allcleanhtml sphinx-docs-clean

# Deletes man pages (HTML version)
deletemanualpages: chk_loc
	-@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \
          find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\
          ${RM} ${LOC}/docs/exampleconcepts ;\
          ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\
          ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\
        fi

allcleanhtml:
	-${OMAKE_SELF} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree

chk_concepts_dir: chk_loc
	@if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \
	  echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi

# Builds simple html versions of the source without links into the $PETSC_ARCH/obj directory, used by make mergecov
srchtml:
	-${OMAKE_SELF} ACTION=simplehtml PETSC_DIR=${PETSC_DIR} alltree_src

###########################################################
# targets to build distribution and update docs
###########################################################

# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz]
dist:
	${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master

# This target works only if you can do 'ssh petsc@login.mcs.anl.gov'
# also copy the file over to ftp site.
web-snapshot:
	@if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \
	    echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \
	  else \
            echo "updating petsc-master snapshot on mcs-web-site"; \
	    tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \
	    cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \
	    /usr/bin/rsync  -e ssh -az --delete $${tmpdir}/petsc-master/ \
              petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\
	    /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\
	    ${RM} -rf $${tmpdir} ;\
	  fi

# build the tarfile - and then update petsc-master snapshot on mcs-web-site
update-web-snapshot: dist web-snapshot

# This target updates website main pages
update-web:
	@cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \
	/usr/bin/rsync -az -C --exclude=documentation/index.html \
          --exclude=documentation/installation.html --exclude=download/index.html \
	  ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc
	@cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications

###########################################################
#
#  See script for details
#
gcov:
	@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py --run_gcov --petsc_arch ${PETSC_ARCH}

mergegcov:
	@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py --merge_gcov  --petsc_arch ${PETSC_ARCH} --merge_branch `lib/petsc/bin/maint/check-merge-branch.sh`


########################
#
# Create the include dependency graph (requires graphviz to be available)
#
includegraph:
	-@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf
	-@echo Include dependency graph written to includegraph.pdf

#
# -------------------------------------------------------------------------------
#
# Some macros to check if the fortran interface is up-to-date.
#
countfortranfunctions:
	-@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \
	cut -d'(' -f1 | tr -s  ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \
	sed "s/_$$//" | sort > /tmp/countfortranfunctions

countcfunctions:
	-@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h  | grep "(" | tr -s ' ' | \
	cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' |  \
	tr 'A-Z' 'a-z' |  sort | uniq > /tmp/countcfunctions

difffortranfunctions: countfortranfunctions countcfunctions
	-@echo -------------- Functions missing in the fortran interface ---------------------
	-@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2
	-@echo ----------------- Functions missing in the C interface ------------------------
	-@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2
	-@${RM}  /tmp/countcfunctions /tmp/countfortranfunctions

checkbadfortranstubs:
	-@echo "========================================="
	-@echo "Functions with MPI_Comm as an Argument"
	-@echo "========================================="
	-@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \
	tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3
	-@echo "========================================="
	-@echo "Functions with a String as an Argument"
	-@echo "========================================="
	-@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \
	tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3
	-@echo "========================================="
	-@echo "Functions with Pointers to PETSc Objects as Argument"
	-@echo "========================================="
	-@cd ${PETSC_DIR}/src/fortran/auto; \
	_p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \
	cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \
	sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \
	for OBJ in $$_p_OBJ; do \
	grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \
	cut -d'(' -f1 | cut -d' ' -f1,3; \
	done

checkpackagetests:
	-@echo "Missing package tests"
	-@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done
	-@echo "Missing download package tests"
	-@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py  | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done

.PHONY: info info_h all deletelibs allclean update \
        alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \
        allhtml allcleanhtml  countfortranfunctions \
        start_configure configure_petsc configure_clean matlabbin install