Tracker: AutoFirmware Menu pops up without being commanded

[kklemens]

Tracker Version: 2023-05-23

Issue: AutoFirmware Menu pops up during normal operations and without being commanded from the ROVL Rx Menu. Closing this AutoFirmware menu leads to a crash report.

[dennysb]

Hello Kevin,

Thanks for reporting this. It is an unintended consequence of trying to optimize access to the firmware repo. A fix is implemented and we will push out a new version of CeruleanTracker in the next week or so. Meanwhile, you might try clicking “check for firmware updates” on the ROVL command window before trying to close the firmware window. Apologies for the inconvenience.

[kklemens]

The above issue seems to be fixed in Tracker v2023-06-27.

However, I still seem to get the following error periodically. This is the error message that would show after the firmware menu was closed. It only manifests itself when the RX is getting pings from the TX, not when the RX is plugged in via USB.

[dennysb]

We don’t quite understand this statement: “It only manifests itself when the RX is getting pings from the TX, not when the RX is plugged in via USB.” Isn’t the RX always plugged in? And how can you tell it’s getting pings if it is not plugged into the USB? If you are plugging and unplugging the RX it may confuse CeruleanTracker. Also, if you could send a screen grab with the “ROVL Rx” tab of the main window showing (and the full text of the exception message if you can get it) it would be helpful.