captureFile.yaml

####################################################################################################################################
# YAML to capture outputs from the devices in the network
# 
# Steps to setup the capture file:
# Step 1 :: Specify the Capture Name (multiple captures allowed).
# Step 2 :: Under each Capture Name, specify the following:
#           devices:   (a list of Devices to capture the outputs from)
#             - one or more IP addresses, 
#             - one or more hostnames or 
#             - specific keywords - AllE, allB and/or AllCP or a combination of the three 
#             - (ALLE is all edges, AllB is Borders, AllCP are all control plane devices) The case is insensitive.
#           sites: 
#             - this filter works only if a specific keyword like Alle, allb or allcp is specified
#             - filters devices from one or more sites 
#           commands: 
#             - list of commands to be executed
#
# For Example:
# cap1: <-- Define a Capture Name
#   devices: 172.23.251.2,allE, Fusion-1  <-- devices can be a combination of IP addresses and/or the keywords AllE, AllB or AllCP (case insensitive)
#   commands: 	    <-- List of commands to be executed
#      - show interface
#      - show ver
#
####################################################################################################################################

cap1:
   devices: 172.23.251.2,172.23.250.2         # devices can be a combination of IP addresses and the keywords AllE, AllB or AllCP (case insensitive)
   commands: 
      - show interface                        # commands to be executed 
      - show ver

capALLE:
   devices: ALLE
   sites:
       - Global/USA/sanjose1
   commands:                                         
       - show ver 
       - show running

capALLB:
   devices: AllB
   commands:                                         
       - show ver
       - show running