Skip to content

Latest commit

 

History

History
108 lines (93 loc) · 3.21 KB

2-Components.md

File metadata and controls

108 lines (93 loc) · 3.21 KB
Raw

Leeloo v2.1 Components

The following components are included within the Leeloo v2.1 Kit.

Component Quantity
Leeloo v2.1 Low Profile LED PCBs (Left and Right) 2
SMD Diodes 60
SK6812 Mini-E LEDs 65
Kailh Low Profile Hot Swaps 60
Reset Switches 2
TRRS Jacks 2
Mill-Max 12-Position Sockets 4
Mill-Max Receptacles 30
Mill-Max Pins 66
Mill-Max 3-Position Sockets 2
Power Cutoff MOSFET 2
Power Cutoff Resistor 2
M2 7mm Brass Stand-off Posts 14
M2 T5 Torx Screws 28
Acrylic Display Covers 2
3M Bump-ons 12
3D Printed Case (Left and Right) 1

Leeloo Additional Components

The following additional components are required—depending on your implementation; however, are not included as part of the Leeloo v2.1 kit.

Wireless Implementation

Component Quantity
nice!nano Microcontroller 2
Alps Alpine Micro Switch 2
3.7V LiPo Battery (110mAh, 600mAh, or 700mAh) 2
nice!view Display† 2

Wired Implementation

Component Quantity
Elite-Pi, or Elite-C Microcontroller 2
OLED Display† 2
TRRS Cable 1

Switches and Keycaps

Component Quantity
Low Profile Switches 58
Low Profile Keycaps 58

Rotary Encoders

Component Quantity
EC11 Encoder w/Push Button (each side)† 1
EC12 Encoder w/w Push Button (each side)† 1
EC11 or EC12 Dial (each side)† 1

† Optional: Albeit optional, the above components can be added in the future, at any time.

Leeloo-Micro v1.1 Components

The following components are included within the Leeloo-Micro v1.1 Kit.

Component Quantity
Leeloo-Micro v1.1 Wireless Low Profile LED PCBs (Left and Right) 2
SMD Diodes 45
SK6812 Mini-E LEDs 45
Kailh Low Profile Hot Swaps 40
Reset Switches 2
Alps Alpine Micro Switch 2
Mill-Max 12-Position Sockets 4
Mill-Max Receptacles 30
Mill-Max Pins 66
Mill-Max 3-Position Sockets 2
Power Cutoff MOSFET 2
Power Cutoff Resistor 2
M2 7mm Brass Stand-off Posts 12
M2 T5 Torx Screws 24
Acrylic Display Covers 2
3M Bump-ons 12
3D Printed Case (Left and Right) 1

Leeloo-Micro Additional Components

The following additional components are required; however, they are not included as part of the Leeloo-Micro v1.1 kit.

Component Quantity
nice!nano Microcontroller 2
3.7V LiPo Battery (110mAh, 600mAh, or 700mAh) 2
nice!view Display† 2

Switches and Keycaps

Component Quantity
Low Profile Switches 40
Low Profile Keycaps 40

Rotary Encoders

Component Quantity
EC11 Encoder w/Push Button (each side)† 1
EC12 Encoder w/w Push Button (each side)† 1
EC11 or EC12 Dial (each side)† 1

† Optional: Albeit optional, the above components can be added in the future, at any time.

Chapters

Next: Chapter 3: Prepare Firmware
Previous: Chapter 1: Preamble
Chapters: Table of Contents
Home: Index