README.md

Flipper Zero - CC1101 Board by TehRabbitt - Case Pin Boot Cover

Description

This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations:

• https://www.printables.com/model/606834

• https://www.thingiverse.com/thing:6122121

• https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20CC1101%20Board%20by%20TehRabbitt%20-%20Case

My print settings:

• Hatchbox PLA
• 0.2mm layer height
• 0.4mm nozzle (line width)
• Enable retraction
• Wall count 3 (+ print thin walls enabled)
• Top/bottom layers: 4
• Infill density: 20%
• Infill pattern: Cubic
• Print temp 200 C
• Bed temp 60 C
• No supports needed

Enjoy!

[ Top | Index ]

File Downloads

• Boot Pin Cover, no labels: 3mf | stl | view

• Boot Pin Cover w/ "CC1101 Sub-GHz" label: 3mf | stl | view

[ Top | Index ]

License

CC-BY-NC-4.0 (view license)

[ Top | Index ]

Images

---

---

---

---

[ Top | Index ]