Tool not filling

[Gargy]

Hi!

I can report an issue.

When I send my tolls to work on the field - after they get empty (seeder, fertilizer) or full (straw) it doesn't get to the filling/emptying station. For seeder/fertilizer I get "Buehrer 6135 A: work tool needs to be filled" (sample for Buehrer 6135 A tractor and Amazone ZA-X 1402 fertilizer, standard tools in the game).

My setup is combined from 4 paths - field to farm, filling on the farm, farm to field and on field path. I tried with course generations, manual course generation, combining all trips in one path.. Always the same... If I stop the work, manually drive tractor to the path "field to farm" it will go to the farm, fill the tool, come back and continue working....

This is happening on stock map, stock tractor and implements (on mods also). It works OK on ver. 3.41 available "public", but is started few versions back.

Log shows nothing special:

data/vehicles/cars/car6.i3d (0.38mb in 35.60 ms)
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 6
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 7
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 8
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 9
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 10
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 11
[dbg5] broadcast event
[dbg5] id: 1114 function: toggleDebugChannel value: 12
[dbg5] broadcast event
[dbg5] id: 1114 function: openCloseHud value: false
[dbg12] Buehrer 6135 A (#1): calling function "openCloseHud(false)"

Any idea?

Regards,
Gargy

[JakobTischler]

Two things: first, try v3.41.0065 (a5fa427), activate debug level 12 and report again (log entries).

Second, with your course setup, try the following course order:

1. Field path
2. field to farm
3. filling on the farm
4. farm to field

Meaning, the field path should always be loaded first.

[Gargy]

Tried the .0065 version, same thing...

BUT! The second option worked! So field path first, then all the others...

Thank you!