Graph4Rec

Graph4Rec: A Universal and Large-scale Toolkit with Graph Neural Networks for Recommender Systems

Introduction

Graph4Rec is a universal and large-scale toolkit with graph neural networks for recommender systems. It contains a large-scale graph engine to store graph data and a parameter server to support distributed GNN training. We also unify the paradigm to train GNN models into the following parts: graph inputs, random walk generation, ego graphs generation, pairs generation and GNNs selection. From this training pipeline, one can easily establish his own GNN model with a few configurations.

Highlighted features:

• Richness: Pre-built rich graph models, including walk-based and GNN-based models.

• Flexibility: With a few configurations, one can easily launch single or distributed training.

• Large-scale: With the help of graph engine and parameter server, Graph4Rec supports industrial graph representation training.

Requirements

Please install paddlepaddle and pgl before using Graph4Rec.

python -m pip install paddlepaddle-gpu==2.2.2

python -m pip install pgl==2.1.5

Quick start

Input format

Suppose there are three different types of nodes, namely "u", "t" and "f". They can form three kinds of edges, namely "u2t (u-t)", "u2f (u-f)" and "t2f (t-f)". Then the format of edges file is as follows:

src_node_id \t dst_node_id

for example:
12345 \t 23345
12345 \t 23346
12346 \t 23345

If there are edge weights, one can directly add the weight behind each edge, the format is as follows:

src_node_id \t dst_node_id \t edge_weight

for example:
12345 \t 23345 \t 0.4
12345 \t 23346 \t 0.2
12346 \t 23345 \t 0.8

The format of the node types file is as follows:

node_type \t node_id

for example:

u \t 12345
u \t 12346
t \t 23345
f \t 23346

You can also find out the specific data format in ./toy_data.

PGL graph engine launching

Now we support distributed loading graph data using PGL Graph Engine. We also develop a simple tutorial to show how to launch a graph engine, please refer to here.

To launch a distributed graph service, please follow the steps below.

IP address setting

The first step is to set the IP list for each graph server. Each IP address with port represents a server. In ./toy_data/ip_list.txt file, we set up 4 graph server as follow for demo:

127.0.0.1:8813
127.0.0.1:8814
127.0.0.1:8815
127.0.0.1:8816

Launching graph engine by openmpi

Before launching the graph engine, you should set up the below hyper-parameters in configuration file in ./user_configs/metapath2vec.yaml:

etype2files: "u2buy2t:./toy_data/u2buy2i.txt,u2click2i:./toy_data/u2click2i.txt"
ntype2files: "u:./toy_data/node_types.txt,i:./toy_data/node_types.txt"
symmetry: True
shard_num: 1000

Then, we can launch the graph engine with the help of OpenMPI.

mpirun -np 4 python -m pgl.distributed.launch --ip_config ./toy_data/ip_list.txt --conf ./user_configs/metapath2vec.yaml --mode mpi --shard_num 1000

Launching graph engine manually

If you didn't install OpenMPI, you can launch the graph engine manually.

Fox example, if we want to use 4 servers, we should run the following command separately on 4 terminals.

# terminal 3
python -m pgl.distributed.launch --ip_config ./toy_data/ip_list.txt --conf ./user_configs/metapath2vec.yaml --shard_num 1000 --server_id 3

# terminal 2
python -m pgl.distributed.launch --ip_config ./toy_data/ip_list.txt --conf ./user_configs/metapath2vec.yaml --shard_num 1000 --server_id 2

# terminal 1
python -m pgl.distributed.launch --ip_config ./toy_data/ip_list.txt --conf ./user_configs/metapath2vec.yaml --shard_num 1000 --server_id 1

# terminal 0
python -m pgl.distributed.launch --ip_config ./toy_data/ip_list.txt --conf ./user_configs/metapath2vec.yaml --shard_num 1000 --server_id 0

Note that the shard_num should be the same as in configuration file.

After successfully launching the graph engine, you can run the below command to train the model in different modes.

Single GPU training and inference

# Training
cd ./env_run/src
export CUDA_VISIBLE_DEVICES=0
python train.py --config ../../user_configs/metapath2vec.yaml --ip ../../toy_data/ip_list.txt

# Inference
python infer.py --config ../../user_configs/metapath2vec.yaml \
                --ip ../../toy_data/ip_list.txt \
                --save_dir ./save_embed/ \
                --infer_from ../../ckpt_custom/metapath2vec.0712/ckpt.pdparams

# The node embeddings will be saved in ./save_embed/embedding.txt

Distributed CPU training and inference in a single machine

# Training
cd ./env_run/src
CPU_NUM=12 fleetrun --log_dir ../../fleet_logs \
                    --worker_num 4 \
                    --server_num 4 \
                    dist_cpu_train.py --config ../../user_configs/metapath2vec.yaml \
                                      --ip ../../toy_data/ip_list.txt

# Inference
CPU_NUM=12 fleetrun --log_dir ../../fleet_logs_infer \
                    --worker_num 4 \
                    --server_num 4 \
                    dist_cpu_infer.py --config ../../user_configs/metapath2vec.yaml \
                                      --ip ../../toy_data/ip_list.txt \
                                      --save_dir ./save_dist_embed/ \
                                      --infer_from ../../ckpt_custom/metapath2vec.0712/

# The node embeddings will be saved in ./save_dist_embed/

Note that the worker_num and server_num in inference stage should be the same as in training stage.

The training log will be saved in ../../fleet_logs.

Distributed CPU training with multi-machine

Suppose we perform distributed training on two machines, and deploy a server node and a trainer node on each machine. You only need to specify the ip and port list of the service node --servers and the ip and port list of the training node --workers, to perform multi-machine training.

In the following example, xx.xx.xx.xx represents machine 1, yy.yy.yy.yy represents machine 2. Then, runing the following commands in each machine.

# Training
cd ./env_run/src

export PADDLE_WITH_GLOO=1
export FLAGS_START_PORT=30510  # http port for multi-machine communication

CPU_NUM=12 fleetrun --log_dir ../../fleet_logs \
                    --workers "xx.xx.xx.xx:8170,yy.yy.yy.yy:8171" \
                    --servers "xx.xx.xx.xx:8270,yy.yy.yy.yy:8271" \
                    dist_cpu_train.py --config ../../user_configs/metapath2vec.yaml \
                                      --ip ../../toy_data/ip_list.txt

Cite

If you use Graph4Rec in a scientific publication, we would appreciate citations to the following paper:

@article{Graph4Rec,
  title={Graph4Rec: A Universal Toolkit with Graph Neural Networks for Recommender Systems},
  author={Li, Weibin and He, Mingkai and Huang, Zhengjie and Wang, Xianming and Feng, Shikun and Wu, Zhihua and Su, Weiyue and Sun, Yu},
  journal={arXiv preprint arXiv:2112.01035},
  year={2021}
}