hardware

Connectors

Some vehicle-specific connector boards are also pretty nice if you want to keep original harness intact

See Connectors wiki page todo: move Connectors wiki page content into git

• 35 pin Mazda TCU
• 38 pin Chrysler NGC connector
• 48 pin Mazda Miata NA6
• 52 pin Mitsubishi Galant VR4
• 55 pin TE Lada
• 55 pin Motronic 1.5.x BMW/GM
• 60 pin Ford EEC-IV
• 64 pin Mazda Miata NA NB1, Honda Civic
• 68 pin Volkswagen Audi VAG
• 72 pin Mazda Miata NB2
• 88 pin Volkswagen Audi VAG
• 121 pin Volkswagen Audi VAG
• 134 pin BWM
• 154 pin Volkswagen Audi VAG

Modules

• stm32 Brain board 48pin
• stm32 Brain board 100pin
• stm32 Brain board 176pin
• CAN module CAN using SN65HVD230
• VR module Variable Reluctance conditioner board VR MAX9926
• Wideband module CJ125 Bosch Wideband board
• VND5E025AKTR double channel high-side driver with analog current sense (used on Dodge Neon 2003 test mule)
• BTS21400 ignition coil IGBT driver (used on Dodge Neon 2003 test mule)
• TLE6240 module integrated low side switch (fabricated, not tested)
• TLE6244 module integrated low side switch (never actually fabricated)
• TLE8810ED module integrated low side switch
• MC33816 common rail driver - rusEFI has working GDI*
• LM1949 low impedance injector driver (never actually fabricated)

New modules are being added to https://github.com/rusefi/hw_modular

Some stuff we have given up on completely is located at https://github.com/rusefi/hw_legacy

Above mentioned modules are known to work unless stated otherwise

More rusEFI hardware

See https://github.com/rusefi/rusefi/wiki/Hardware

Frankenso

Frankenso has moved to https://github.com/rusefi/rusefi-hardware/tree/main/classic-designs

More info

Interactive Html Boms

See Hardware status forum thread todo: move hardware status content into git

Important note

rusEFI is currently transitioning from KiCAD 4 to KiCAD 5.

Important note

Depends on libraries from https://github.com/rusefi/kicad-libraries

If you download complete repo do not forget to download libraries. If you git clone be sure to also

git submodule update --init

git submodule update --init