Releases: Duet3D/PanelDueFirmware
PanelDue-3.4.1
Release Notes
This release requires RepRapFirmware 3.3 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
3.4.1-pre1:
- M291 S3 message not cleared
- Fix m291 jogging axes shown
- Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
3.4.1-pre2:
- improved file detail popup layout
- use faster stack size calculation when not debugging
- updated RRFLibrary
- added CRC16 to gcode request
- by default CRC16 is enabled
- added option to disable checksum and CRC16 in gcode requests
- improved m291 jogging layout
- fixed m291 axis selection handling
3.4.1-pre3:
- fixed babystep button handling
- added polish translation
- update RRFLibraries
3.4.1:
- fixed babystep button handling
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1
Flashing instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue
PanelDue-3.4.1-pre3
Release Notes
This release requires RepRapFirmware 3.3 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
3.4.1-pre1:
- M291 S3 message not cleared
- Fix m291 jogging axes shown
- Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
3.4.1-pre2:
- improved file detail popup layout
- use faster stack size calculation when not debugging
- updated RRFLibrary
- added CRC16 to gcode request
- by default CRC16 is enabled
- added option to disable checksum and CRC16 in gcode requests
- improved m291 jogging layout
- fixed m291 axis selection handling
3.4.1-pre3:
- fixed babystep button handling
- added polish translation
- update RRFLibraries
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre3
Flashing instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue
PanelDue-3.4.1-pre2
Release Notes
This release requires RepRapFirmware 3.3 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
3.4.1-pre1:
- M291 S3 message not cleared
- Fix m291 jogging axes shown
- Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
3.4.1-pre2:
- improved file detail popup layout
- use faster stack size calculation when not debugging
- updated RRFLibrary
- added CRC16 to gcode request
- by default CRC16 is enabled
- added option to disable checksum and CRC16 in gcode requests
- improved m291 jogging layout
- fixed m291 axis selection handling
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre2
Flashing instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue
PanelDue-3.4.1-pre1
Release Notes
This release requires RepRapFirmware 3.3 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
- M291 S3 message not cleared
- Fix m291 jogging axes shown
- Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre1
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-3.4.0
Release Notes 3.4.0
This release requires RepRapFirmware 3.3 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
- add cross-platform headless builds based on cmake
- cleaned up dim/screensaver handling
- removed compiler warnings
- enabled Russian localization by default
- enabled Ukrainian localization by default
- improved list-locales tool for translation debugging
- fixed displaying of M291 S2 and S3 if followed by M292
- fixed displaying macro buttons in control tab
- fixed setting of serial baud rate after reboot
- cleaned up English
- cleaned up Czech translation
- cleaned up French translation
- cleaned up German translation
- fixed access to second sd card
- cleaned up Russian translation
- fixed persistent pressed button handling in some dialogs
- fixed updates via RRF
- fixed displaying of multiple heaters per tool
- improved readme
- fix brightness handling during pop-ups
- disabled spammy debug information
- show babystep button if printer is idle
- cleaned up Spanish translation
- change default feedrates
- extend m291 popup to allow movement of other axis, up to 10
- updated RRFLibraries
- fixed babystep button alignment in setup tab
- moved popup code into separate module
- show connection loss in status
- show warning when more than 2 malformed successive request responses are received
- log status changes console
- add support for ccache to speed up compilation
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-1.25.0
Release Notes 1.25.0
- Corrected brightness range for ER display with MP3302 backlight chip
- SplashScreens: fixed splashscreen names for case sensitive filesystems
- Added support for newer integrated displays with MP3302 backlight chip (#195)
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/1.25.0
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-3.4.0-rc2
Release Notes 3.4.0-rc2
This release requires RepRapFirmware 3.4 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
- add cross-platform headless builds based on cmake
- cleaned up dim/screensaver handling
- removed compiler warnings
- enabled Russian localization by default
- enabled Ukrainian localization by default
- improved list-locales tool for translation debugging
- fixed displaying of M291 S2 and S3 if followed by M292
- fixed displaying macro buttons in control tab
- fixed setting of serial baud rate after reboot
- cleaned up English
- cleaned up Czech translation
- cleaned up French translation
- cleaned up German translation
- fixed access to second sd card
- cleaned up Russian translation
- fixed persistent pressed button handling in some dialogs
- fixed updates via RRF
- fixed displaying of multiple heaters per tool
- improved readme
- fix brightness handling during pop-ups
- disabled spammy debug information
- show babystep button if printer is idle
- cleaned up Spanish translation
- change default feedrates
- extend m291 popup to allow movement of other axis, up to 10
- updated RRFLibraries
- fixed babystep button alignment in setup tab
- moved popup code into separate module
- show connection loss in status
- show warning when more than 2 malformed successive request responses are received
- log status changes console
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-rc2
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-3.4.0-rc1
Release Notes 3.4.0-rc1
This release requires RepRapFirmware 3.4 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
- add cross-platform headless builds based on cmake
- cleaned up dim/screensaver handling
- removed compiler warnings
- enabled Russian localization by default
- enabled Ukrainian localization by default
- improved list-locales tool for translation debugging
- fixed displaying of M291 S2 and S3 if followed by M292
- fixed displaying macro buttons in control tab
- fixed setting of serial baud rate after reboot
- cleaned up English
- cleaned up Czech translation
- cleaned up French translation
- cleaned up German translation
- fixed access to second sd card
- cleaned up Russian translation
- fixed persistent pressed button handling in some dialogs
- fixed updates via RRF
- fixed displaying of multiple heaters per tool
- improved readme
- fix brightness handling during pop-ups
- disabled spammy debug information
- show babystep button if printer is idle
- cleaned up Spanish translation
- change default feedrates
- extend m291 popup to allow movement of other axis, up to 10
- updated RRFLibraries
- fixed babystep button alignment in setup tab
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-rc1
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-3.4.0-pre4
Release Notes 3.4.0-pre4
This release requires RepRapFirmware 3.4 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
- add cross-platform headless builds based on cmake
- cleaned up dim/screensaver handling
- removed compiler warnings
- enabled Russian localization by default
- enabled Ukrainian localization by default
- improved list-locales tool for translation debugging
- fixed displaying of M291 S2 and S3 if followed by M292
- fixed displaying macro buttons in control tab
- fixed setting of serial baud rate after reboot
- cleaned up English
- cleaned up Czech translation
- cleaned up French translation
- cleaned up German translation
- fixed access to second sd card
- cleaned up Russian translation
- fixed persistent pressed button handling in some dialogs
- fixed updates via RRF
- fixed displaying of multiple heaters per tool
- improved readme
- fix brightness handling during pop-ups
- disabled spammy debug information
- show babystep button if printer is idle
- cleaned up Spanish translation
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-pre4
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update
PanelDue-3.4.0-pre3
Release Notes 3.4.0-pre3
This release requires RepRapFirmware 3.4 or later.
Version 2 (after August 2016) and Version 3 PanelDue are supported.
Features:
- add cross-platform headless builds based on cmake
- cleaned up dim/screensaver handling
- removed compiler warnings
- enabled Russian localization by default
- enabled Ukrainian localization by default
- improved list-locales tool for translation debugging
Bug fixes:
- fixed displaying of M291 S2 and S3 if followed by M292
- fixed displaying macro buttons in control tab
- fixed setting of serial baud rate after reboot
- cleaned up English
- cleaned up Czech translation
- cleaned up French translation
- cleaned up German translation
- fixed access to second sd card
- cleaned up Russian translation
- fixed persistent pressed button handling in some dialogs
- fixed updates via RRF
Downloads and flashing instructions:
Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-pre3
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update