Newbie questions for electric window opener project

[RussH007]

Hi Everyone,
I am a complete novice at this stuff so please forgive my lack of knowledge !

I currently have a powered window opener which uses a rocker switch to open / close the window. I have to hold the rocker switch for around 10 seconds to go from completely closed to completely open and vice versa (the motor automatically cuts the power when max / min extent is reached)

I have bought a Guition esp32-s3-4848s040 (https://www.aliexpress.com/item/1005006335587633.html?spm=a2g0o.order_list.order_list_main.5.54131802O97c45) which I would like to use with OpenHASP to automate this and to be able to control the window from my phone.

I have a list of goals and wanted to know if HASP can achieve all of these before I flash the board.

This is what I would like to achieve if it's possible.

MUST HAVE
Open /close buttons - to act the same as the current rocker switch - i.e. energise the relay for as long as the button pressed. and cut the power when the button is released

Full Open / Full close buttons - energise the relay for 10 seconds.

Close window at specific time of day (say 1am every day)

Turn off the display after x seconds when not used . wake up when touched.

NICE TO HAVE
I am also looking to add a temperature sensor to open the window if room temperature exceeds a given level and possible look to add a rain sensor at some point.

Many thanks for your help
Russ