Revert "Adds OpenThread to Arduino 3.0.x (espressif#179)"

This reverts commit 95b9989.

Author: HamzaHajeir

configs/defconfig.esp32c6

@@ -7,48 +7,3 @@ CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
 #CONFIG_ULP_COPROC_ENABLED=y
 #CONFIG_ULP_COPROC_LP_CORE=y
 #CONFIG_ULP_COPROC_RESERVE_MEM=4096
-
-#
-# ESP32 Arduino OpenThread Configuration
-#
-# lwIP
-#
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
-CONFIG_LWIP_MULTICAST_PING=y
-CONFIG_LWIP_BROADCAST_PING=y
-CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM=y
-# end of lwip
-
-#
-# mbedTLS
-#
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
-CONFIG_MBEDTLS_ECJPAKE_C=y
-# end of mbedTLS
-
-#
-# OpenThread
-#
-CONFIG_OPENTHREAD_ENABLED=y
-# Border Router disabled
-# CONFIG_OPENTHREAD_BORDER_ROUTER=y
-# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
-CONFIG_OPENTHREAD_DNS64_CLIENT=y
-# Radio for RPC
-# CONFIG_OPENTHREAD_RADIO=y 
-# CONFIG_OPENTHREAD_RADIO_NATIVE=y
-# CONFIG_OPENTHREAD_DIAG=n
-CONFIG_OPENTHREAD_COMMISSIONER=y
-CONFIG_OPENTHREAD_JOINER=y
-CONFIG_OPENTHREAD_CLI=y
-CONFIG_OPENTHREAD_SRP_CLIENT=y
-CONFIG_OPENTHREAD_DNS_CLIENT=y
-# Default dataset for quick start
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of OpenThread

configs/defconfig.esp32h2

@@ -3,48 +3,3 @@ CONFIG_BT_BLE_BLUFI_ENABLE=y
 CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
 CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
-
-#
-# ESP32 Arduino OpenThread Configuration
-#
-# lwIP
-#
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
-CONFIG_LWIP_MULTICAST_PING=y
-CONFIG_LWIP_BROADCAST_PING=y
-CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM=y
-# end of lwip
-
-#
-# mbedTLS
-#
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
-CONFIG_MBEDTLS_ECJPAKE_C=y
-# end of mbedTLS
-
-#
-# OpenThread
-#
-CONFIG_OPENTHREAD_ENABLED=y
-# Border Router disabled
-# CONFIG_OPENTHREAD_BORDER_ROUTER=y
-# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
-CONFIG_OPENTHREAD_DNS64_CLIENT=y
-# Radio for RPC
-# CONFIG_OPENTHREAD_RADIO=y 
-# CONFIG_OPENTHREAD_RADIO_NATIVE=y
-# CONFIG_OPENTHREAD_DIAG=n
-CONFIG_OPENTHREAD_COMMISSIONER=y
-CONFIG_OPENTHREAD_JOINER=y
-CONFIG_OPENTHREAD_CLI=y
-CONFIG_OPENTHREAD_SRP_CLIENT=y
-CONFIG_OPENTHREAD_DNS_CLIENT=y
-# Default dataset for quick start
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of OpenThread