Skip to content

Latest commit

 

History

History
66 lines (42 loc) · 3.03 KB

README.md

File metadata and controls

66 lines (42 loc) · 3.03 KB
Raw

CAT1 Cortex M0+ prebuilt images

Overview

Prebuilt application images are executed on the Cortex M0+ core of the CAT1 dual-core MCU. The images are provided as C arrays ready to be compiled as part of the Cortex M4/M7 application. The Cortex M0+ application code is placed to internal flash by the Cortex M4/M7 linker script.

Note: Each application image has a variant based on the hardware die (e.g. psoc6_01, psoc6_02, psoc6_03, xmc7100, xmc7200, tviibe1m, tviibe4m) it is supported on. An #ifdef at the top of each .c file automatically controls which version is used so there is no need to specify a particular image.

CAT1A Images

  • COMPONENT_CM0P_SLEEP

    This image starts CM4 core at CY_CORTEX_M4_APPL_ADDR=0x10002000 and puts CM0+ core into a deep sleep mode.

  • COMPONENT_CM0P_CRYPTO

    This image starts crypto server on CM0+ core, starts CM4 core at CY_CORTEX_M4_APPL_ADDR=0x1000A000 and puts CM0+ core into a deep sleep mode.

  • COMPONENT_CM0P_BLESS

    This image starts BLE controller on CM0+ core, starts CM4 core at CY_CORTEX_M4_APPL_ADDR=0x10020000 and puts CM0+ core into a deep sleep mode.

  • COMPONENT_CM0P_SECURE

    This image starts CM4 core at address corresponding to Secure Boot policy, sets required security settings, initializes and executes code of Protected Register Access driver, puts CM0+ core into a deep sleep mode.

CAT1C Images

  • COMPONENT_DUAL_CM0P_SLEEP

    This image starts up both CM7 cores (CM7_0/CM7_1) on CAT1C devices at CY_CORTEX_M7_0_APPL_ADDR and CY_CORTEX_M7_1_APPL_ADDR respectively and then puts the CM0+ core into a deep sleep mode.

    This component is not compatible with single CM7 core devices.

  • COMPONENT_CM0P_SLEEP

    This image starts up the first CM7 core (CM7_0) on CAT1C devices at CY_CORTEX_M7_0_APPL_ADDR and puts the CM0+ core into a deep sleep mode.

  • COMPONENT_XMC7xDUAL_CM0P_SLEEP

    This image is meant for dual CM7 core (CM7_0/1) XMC7xxx device. This image starts both CM7_0 and CM7_1 core at CY_CORTEX_M7_0_APPL_ADDR and CY_CORTEX_M7_1_APPL_ADDR respectively and puts CM0+ core into a deep sleep mode.

  • COMPONENT_XMC7x_CM0P_SLEEP

    This image is meant for single CM7 core (CM7_0) XMC7xxx device. This image starts CM7_0 core at CY_CORTEX_M7_0_APPL_ADDR and puts CM0+ core into a deep sleep mode.

More information

Use the following links for more information, as needed:

© Cypress Semiconductor Corporation (an Infineon company), 2023-2024.