Sprite Extruder

[Ayasha-Code]

When Auto Leveling the print head moves to the correct position but it puts the CR Touch off the front of the hot plate. So it cant get a correct reading. Is there a way to adjust that in this firmware?

The link for the custom firmware that came with the print assembly is https://bit.ly/3zPZzk1

[Chuckebemeh]

I just installed a sprite on my ender 3 v2 i used UBL 10x10all work tho. Go in the settings on your printer there's a probe offset settings measure the offset between nozzle and probe put offset in and then use z offset tool to see if your measurements are correct if they are your nozzle and probe should hover/touch the same spot on the bed when homing z offset. that fixed it for me hope this helps you.